Trabajos welding en New York, New York - Page 3Crear alertas

Job Description We are seeking a Food Service Director to join our team! You will be responsible for providing customers with a memorable dining experience. Responsibilities: • Planning departmental policy and procedure making, menu and production planning, equipment arrangement, establishment of standards to be maintained in the Dietary Department following the rules and laws of Diet Therapy, sanitation and safety Procedures., • Develops recipes and nutritional analysis., • Dividing tasks into positions, personnel selection to meet the table of organizational chart; welding together of an effective staff without overlapping or duplicating responsibilities., • The Therapeutic Dietician gives the number of residents to be served in order to determine the quantities of food needed to purchase., • This figure will help to determine budget making and predicting future needs for staff and departmental based on trends of changes., • Delegating assignment of responsibilities and authority to each staff member through schedule and job description., • The Food Service Director will be responsible to insure that all employees of the Dietary Department will have on-going in-service education program using the Policy and Procedure Manual., • The Food Service Director is responsible in recording food and non-food supply costs, labor costs, meals served per day to determine the food cost per resident per day., • Develops and implements work standards, sanitation procedures and personal hygiene requirements consistent with the facility., • Responsible for records and reports concerning technical and administrative operations, such as number of meals served, menus, food costs, supplies issued, repairs of dietary equipment, maintenance service and costs, personnel attendance records, and continuous inventory of supply on hand., • Prepares and submits monthly report to Administrator., • The Food Service Director will be responsible for the on-going on the job training of all the dietary employees., • Orientation program will be given to all new employees to acquaint them with work assignments, schedules, required performance standards and the Policy and Procedure Manual., • The Food Service Director will do all the ordering of foods and equipment., • The Food Service Director will be responsible for keeping a current physical inventory of all food and non-food items of the Dietary Department. 1. Registered Dietitian (must have license), 2. At least 2 years experience working in a nursing facility., 3. At least 2 years experience working as a dietitian., 4. Knowledge in Geri Menu and SigmaCare., 5. Previous experience in food service or other related fields, 6. Strong leadership qualities, 7. Ability to thrive in a fast-paced environment, 8. Excellent written and communication skills

Job DescriptionStructural Welder (Pulse Arc) $45/hr and $140 in per diem Job Description We are seeking a highly skilled Structural Welder with expertise in Pulse Arc welding techniques to join our team. You will be responsible for assisting on the building of nuclear powered submarines and aircraft carriers. This role requires a minimum of four years of experience in naval shipyard environments, specializing in various welding processes including Pulse Arc Welding (GMAW-P), Stick Welding (SMAW), MIG Welding (GMAW), and Flux-Core Welding. Responsibilities • Perform multi-pass, all-position fillet and butt welds using SMAW, GMAW, FCAW, and GMAW-P processes., • Work efficiently in physically demanding environments such as shipboard, sub-assemblies, and staging areas., • Ensure compliance with OSHA regulations pertinent to the shipbuilding industry., • Utilize air carbon arc gouging techniques and properly use fillet and butt weld gauges., • 4+ years of experience with GMAW, FCAW, and GMAW-P welding processes., • Experience in physically demanding environments and working with shipboard sub-assemblies., • Knowledge of OSHA regulations for shipbuilding., • Skill in air carbon arc gouging. The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on Oct 31, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Minimum Pay Rate $22.00 per hour Maximum Pay Rate $22.00 per hour JOB SUMMARY Responsible for assembly of new generation containers and repairing of multi-generational containers on company branded containers as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES · Perform assembly-type functions using hand and/or power tools (without supervision) · Ensure Quality Standards are met · Move materials using hand cart and or pallet jack · Basic computer skills · Pressure washing · Shop clean up · Able to complete forklift training and safely operate a forklift · Perform light welding tasks (roof discs, door tracks) and simple fabrication · Weld plastic (roofs/panels) · Perform simple cutting operations with oxy/fuel equipment · Adhere to all safety policies and perform all tasks in a safe manner including adherence to OSHA regulations · May perform other duties and responsibilities as assigned JOB QUALIFICATIONS: Education & Experience Requirements · High School diploma or equivalent · 1-3 years in a related field (assembly, steel fabrication, carpentry, industrial painting, etc) · Ability to read and understand English is required for OSHA safety regulations · Possess a current valid driver’s license with clean driving record · Possess math skills sufficient to perform required duties; ability to apply these skills to units of American weight measurement, volume and distance · Or an equivalent combination of education, training or experience General Benefits & Other Compensation: • Medical, dental, and vision insurance, • Employer-paid life insurance and disability coverage, • 401(k) retirement plan with employer match, • Paid time off (vacation, sick leave, personal days), • Paid holidays, • Parental leave / family leave, • Bonus eligibility / incentive pay, • Professional development / training reimbursement, • Employee assistance program (EAP), • Commuter benefits / transit subsidies (if available), • Other fringe benefits (e.g. wellness credits)

Job Description Design Engineer, Decorative lighting , Bronx, NY Here at HB Architectural Lighting, we manufacture large- and small-scale, custom decorative light fixtures for public spaces, guest rooms, restaurants, places of worship, universities, high-end residences, and more. Based in Bronx, New York, our 30,000 square foot factory is vertically integrated with state-of-the-art, automated, and hand-operated machinery. Our highly skilled team turns conceptual designs into manufacturable products using various manufacturing techniques including CAD drawing, laser cutting, CNC machining, hand-forming metal, welding, polishing, hand finishing, and shade making. The Candidate will be responsible for: • Converting sketches developed by our customers, into a manufacture-able product using AutoCAD and or Solidworks software, • Be able to produce accurate part drawings, Detailed and Bills of Materials in the format established by our company standards, • Work with our Manufacturing team and Project Manager(s) throughout the manufacturing process to ensure the product meets the customer's expectations.

Job Description Job Description Ferra Designs Inc. in Brooklyn, NY seeks full-time architectural metal fabricators for an ultra-high-end fabrication shop. Knowledge of the highest standard of craftsmanship and finish quality is a must. Qualified candidates are asked to include work samples and professional references. This position is in Brooklyn, NY and is full-time. Job Requirements ● Minimum of 5 years fabricating steel, aluminum and brass materials. ● Ability to fabricate in various metals including steel, stainless steel, brass, bronze, and aluminum ● Ability to create projects of the utmost quality ● Ability to read and work from formal drawings or sketches to follow fabrication plans ● Ability to set up jigs and weld in a manner which minimizes distortion of materials ● Proficient with a variety of welding techniques ranging from TIG welding of stainless steel & brass to MIG welding of heavy structural steel sections ● Familiar with common metal shop tools and equipment. IE: welders, torches, grinders, drills, taps, saws, clamping devices, measuring and marking tools ● Fine finishing of parts using a variety of stationary and portable grinders, files, polishing wheels and sanders ● Install delicate, finely finished parts on locations within tight tolerances ● Excellent verbal and written communication ● Function as a part of an effective team ● Ability to multitask and juggle shifting job priorities ● Work in a highly organized and clean fashion ● Keep a professional demeanor Additional Preferred Skills/Abilities/Experience ● Welding certifications (AWS D1.1) ● Operable knowledge of SolidWorks or comparable parametric modeling software ● Skilled in a variety of metal welding and finishing techniques ● Project development experience ● Ability to operate metal specific equipment such as a press brake, pinch rolls, fork lift, CNC machining center, CNC press brake, CNC cutting center, Waterjet, 5-axis CNC router ● Polishing experience ● Rigging experience ● Helical Rolling experience ● Experience taking site surveys and site-specific measurements ● Hand drawing / drafting skills ● Wood shop / Cabinetry experience Notes ● Must maintain excellent attendance record and will often be asked to work overtime hours ● Positive attitude ● Drivers license Ferra Designs Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Company DescriptionLong time player in the NYC Architectural Metal game. Prestigious projects all around the 5 boros. time player in the NYC Architectural Metal game. Prestigious projects all around the 5 boros.

Job Description Aero Manufacturing Co an industry leader in the design, manufacturing and distribution of custom stainless-steel equipment for the food service, Plumbing and materials handling industry is looking for experienced TIG welders responsible for fitting and welding of stainless steel parts using TIG process. PRIMARY RESPONSIBILITIES o Set up welding machines o Read and interpret blueprints and/or drawings to determine the specific welding requirements o Fit and TIG weld stainless steel components based on the specifications of the blueprints and/or drawings o Insure work conforms to prints and quality requirements. o Follow production plans and required daily output requirements. o Assists with material cutting and preparation as needed. Including sawing, grinding and deburring. o Keep work areas clean and organized and take proper care of all equipment and facilities o Provide a great level of attention to detail and focus on the given task o Follow all safety rules and quality standards o Work together with team members to maximize productivity and efficiency KNOWLEDGE AND SKILL REQUIREMENTS o High School Diploma or equivalent preferred o One-year related experience and/or training through a certified training facility. o Experience with stainless steel TIG welding required o Ability to lift up to 50 pounds independently. o must be able to stand, kneel, stoop. o Ability to identify and measure material types and thicknesses o Ability to produce quality products consistently o Ability to follow instructions given both verbally and in written form o Must be reliable with a strong work ethic We are an Equal Employment Opportunity Employer. We offer a competitive salary with great benefits. The position is full-time; Monday-Friday. 1st shift, 7:30 Am to 4:00 PM with some overtime. Benefits: o Retirement Plan o Health insurance o Paid time off Schedule: o 8-hour shift o Day shift o Monday to Friday o Overtime Work Location: One location

Job Description Our New Hyde Park shop is looking for a Machinist (manual lathe) to join the team. You will perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Monday - Friday, 7 AM - 3:30 PM. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler, • Ability to machine housings, shafts, keyways, and sleeves, • Must be familiar with common industry tolerances and fits for motor repair, • Fabricate products to meet established quality standards and the requirements of our customers, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain personal and shop tools and equipment, • Willing and able to work OT as required Machinist Necessary Qualifications • Manual Lathe experience required, • 5 years' mechanical assembly and disassembly experience, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions Salary Commensurate with Experience (Range between $22 - $38/hour) Benefits • Health insurance (medical, dental, vision), • 401K, • PTO Program and Paid Holidays We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. The Power-Flo Technologies family of companies include United Electric Power, Aetna Electric, Long Island Electrical Distributors, Electric Switchboard Solutions, Misa Plumbing, Axis NJ LLC, Power-Flo Pumps and Systems, US Energy Group, Dittman and Greer, AAI, United-Richter, Twinco, Nassor Electric

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated manufacturing engineers to join its rapidly growing team. The Manufacturing Engineering role will develop and implement processes, tooling, and equipment necessary to manufacture and test high temperature superconducting (“HTS”) magnets. This role will also help establish the foundations of Process Engineering and Quality Engineering at Thea Energy as we build and commission a magnet manufacturing and test facility. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibilities: • Generate documentation for the manufacture of HTS magnets, including processes and procedures, work instructions, and quality criteria, • Design, build, and commission magnet manufacturing tooling and equipment, • Work iteratively with magnet engineers to incorporate design for manufacture and lessons learned, • Develop and implement virtual and physical inventory management and manufacturing BOMs, • Generate specifications for and collaborate with vendors to procure hardware that meets quality specifications, • Define roles for and coordinate onboarding of manufacturing technicians, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersQualifications:, • Experience with first encounters of complex hardware assemblies, • Experience scaling from first-of-a-kind to continuous production, • Experience generating and interpreting manufacturing drawings, particularly GD&T, • Experience with fusion processes, including soldering, brazing, and welding, • Experience with planning and execution software including PLM, MRP, and inventory management, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in mechanical engineering, manufacturing engineer, or related field, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionDescription: Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Responsibilities: • Perform routine maintenance on various machines and equipment to ensure safe and efficient operation., • Diagnose and repair mechanical, electrical, and hydraulic/pneumatic issues., • Use diagnostic tools such as multimeters., • Read and interpret electrical schematics to troubleshoot and repair electrical issues., • Rebuild and repair hydraulic and pneumatic systems as needed., • Use basic welding skills to repair and fabricate machine parts., • Apply basic mechanical engineering knowledge to improve machine performance and efficiency., • Medical, Dental, Vision, • Vacation and sick time, • Company-provided life insurance, • Supplemental benefits: Short- and Long-term Disability, • Education Assistance, • 401k match of up to 4% Minimum of 2 years of experience in machine maintenance and repair. • Ability to read and interpret electrical schematics., • Ability to diagnose electrical problems using a multimeter., • Knowledge of pneumatics/hydraulics and the ability to rebuild and repair them., • Basic welding knowledge., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Proficiency in English (verbal and written) for effective communication and following precise instructions., • Must have a current and valid driver's license., • Ability to lift heavy objects and perform physical tasks as required. Pre-employment screening: A legally compliant background check, motor vehicle record check, and pre-employment drug screening are required. Employment Eligibility All applicants must complete the I-9 Employment Eligibility Verification form upon hire and provide acceptable documents to verify their identity and work authorization as required by federal law. Equal Opportunity Employer We are an equal opportunity employer and comply with all applicable laws regarding discrimination and hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Job Description Mechanical Design Engineer Responsibilities • Analyze customer requirements to provide appropriate heat exchanger selection, • Design heat exchangers for performance and manufacturability, • Prepare detail and assembly drawings, • Assist with manufacturing, assembling and testing prototypes and custom products., • Interface directly with customer on technical and service issues, • Bachelor's Degree in Mechanical Engineering, • 5-10 years' experience in a project-oriented environment., • Excellent mechanical design skills, including stress analysis., • Heat transfer and thermodynamics experience, • Familiarity with common industrial machining and welding processes., • CAD software, • Creative and independent problem solver., • Ability to manage multiple responsibilities simultaneously, • Good communication skills Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Description Director of Manufacturing - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical-related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years of experience in a manufacturing environment, including managing salaried and hourly staff., • Minimum 5 years of experience using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director of Manufacturing Engineering (ME Director) is responsible for supporting business goals, including product cost and quality, schedule adherence, and timely delivery to meet customer demand. It is a hands-on position responsible for ensuring that manufacturing processes, tooling, and equipment support the business's Safety, Quality, Delivery, and Productivity goals. This ME Director plays an integral part in plant operations, special projects, and is responsible for developing and maintaining a motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES • The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Responsible for developing the standard processes used to manufacture heat exchangers, including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible for ensuring all production processes are defined using the standard work formats and templates, as well as creating any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics, including quality, yields, cycle time, productivity, and cost. Promote process improvement, LEAN manufacturing methodologies, and 5S processes., • Implement and drive continuous improvement activities through the implementation ofthe change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements/quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment and tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for the entire department., • Provide oversight for manufacturing activities in our Mexico facility., • Minimal travel expected. Potential travel to a facility in Mexico in support of overall business objectives. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical, along with longer-term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems, preferably Oracle., • Proficient in Microsoft Office programs, including Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies, including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction, and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Primary duties will include the visual welding inspection of poles and heavy structural steel assemblies for compliance to the specified detail drawings as well as AWS and AISC specifications. Must be a CWI (Certified Welding Inspector). All qualified applicants will receive consideration without re

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Aseptic technique is required for tube most activities welding, connections, and transfers, at minimum.

Collaborate with production teams to optimize welding processes. Provide training and guidance on welding procedures. AWS Certified Welding Inspector certification (Required).

Must be able to use Argon gas and TIG Welding procedures to connect metal components Must be able to position and clamp metal components for welding. The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blue

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.

Use specialized machinery for industrial welding and oversee machines that perform the same job.

The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary Responsibilities: Must be able to meet or exceed the requirement of the project through manual fabrica

Weld sections of boiler together using welding machines or systems.

Job Description For over 60 years, APEX Technical School has helped students get the training they need to go after the jobs they want through our unique program of both classroom and hands-on instruction. Your skills and passion can make a difference for the next generation of students. APEX is looking for a highly skilled Electrical Instructor to teach hands-on work with a group of students who are eager to learn. ABSOLUTELY no teaching experience required. You supply the skills and we supply everything else, even the tools! Knowledge • Install and repair various electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Troubleshoot motor and control systems, • Perform routine maintenance on electrical wiring and systems, • Security and Fire Alarm System Installation, • Proficient in reading blueprints, manuals, and electrical schematics, • Highly skilled in working with electrical equipment and hand tools, • Strong problem solving and critical thinking skills, • Minimum 3 years of field experience, • Salary pay, • Medical, Dental, and Vision insurance, • 403B (Retirement plan), • Extra Shifts available, • Full-time Morning Shift, • Part-time Evening ShiftCompany DescriptionApex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with six 900-hour certificate courses in skilled trades including refrigeration, automotive service, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility—leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education. Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Apex joined The Fedcap Group in 2021Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with six 900-hour certificate courses in skilled trades including refrigeration, automotive service, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility—leading to entry level careers. \r\n\r\nApex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education. Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. \r\n \r\nApex joined The Fedcap Group in 2021

Develop robust and repeatable joining procedures for high-precision components using technologies such as Gas Tungsten Arc Welding (GTAW), Laser Beam Welding (LBW), and Brazing. Strong analysis and communication skills, resourcefulness, creativity, initiative, and a bachelor's degree in welding, met

To be eligible to enlist in the U.Navy, candidates must be between the ages of 18-34.Not many people can claim the ocean as their office.As a Navy Diver, your job will take you to the depths of the sea to perform underwater welding on ships, search harbors for impediments, retrieve sunken ship wreck

Waste Connections has an immediate position available for a Container Repair / Welder located in Brooklyn, NY.In this position, you will wear a few different hats, but main duties will include welding, fabricating, and compactor repair.This is a full-time, long-term position with a great company.If

Testing procedures and inspections will primarily include structural steel testing. Valid AWS Certified Welding Inspector;. Understanding of the fundamentals of building inspection codes and requirements in order to carry out testing, including, but not limited to, International Building Codes, ASTM

Selected candidates will be responsible for performing inspections and testing on a wide variety of project types, including but not limited to building construction sites, power generation facilities, bridges and fabrication facilities.Most project sites are within 90 miles of the corporate office,

Conduct welding inspections to a variety of code standards. AWS CWI, Certified Welding Inspector Certification. Inspections & Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard

The pay range per hour is $38.50 - $42.50 Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at ___. About job: • Benefits eligible within two weeks of employment, • Currently hiring for below shifts:, • U1: Sunday through Wednesday from 6:00am - 4:00pm About us: Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. ___. A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest. As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will: • Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS), • Adjust scanners, cameras, field buses, scales and printer applicators, • Reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys), • Clean, lubricate, and calibrate equipment, • Use appropriate job plans, procedures, and manuals, • Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc., • Assist with basic electronics/ Programmable Logic Controls troubleshooting, • Conduct maintenance and basic troubleshooting of all types of industrial robots, • Utilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used), • Develop and maintain positive working relationships across all levels of the organization, • Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazards, • Operate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies, • [F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs. About you: Physical Demands (must be able to perform with or without reasonable accommodation): • Regular bending, lifting, stretching and reaching both below the waist and above the head, • Lift and move totes up to 49 pounds each, • Walking within and around the site with great frequency, • Ability to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heights, • Full manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation), • Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces, • Ability to stand/walk for up to 10-12 hours Qualifications: • High school diploma or equivalent required, • Possesses and maintains a valid driver's license for state employed, • PC competency and ability to use mobile apps on handheld devices, • Familiar with wiring diagrams, symbols and electrical measuring, • [F&B Only:] Comfortable working in a temperature-controlled environment, • Experience in the following areas:, • Work order management, • Preventive/predictive maintenance procedures, • Basic blueprint and schematic reading, • Electrical and electronic principles, • Basic metal fabrication and welding, • Industrial Controls and Electronics, • Ability to troubleshoot basic Input/Output functions, • Programmable Logic Control (PLC) programs, • Desired:, • Degree from a vocational school or college with a focus in the Mechanical or Electrical field, • 2+ years apprenticeship or equivalent experience in the Mechanical or Electrical field, • Experience with automated conveyor systems and controls, • Experience with Material Handling Equipment (MHE) safety standards, • Experience with robotic operation/ maintenance Benefits Eligibility Please paste this url into your preferred browser to learn about benefits eligibility for this role: | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: Americans with Disabilities Act (ADA) In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to . Non-accommodation-related requests, such as application follow-ups or technical issues, will not be addressed through this channel.

false false false EN-US X-NONE X-NONE H.O. Penn Machinery HIRING IMMEDIATELY Construction Equipment Mechanic Bronx, NY Pay:$45.71 - $60.19/hour Benefits: \n • UP TO $25,000 SIGN-ON BONUS\n, • UNION Shop!\n, • Pension, welfare, annuity, vacation funds, & competitive employer contributions \n, • Medical/dental/vision insurance\n Experience in troubleshooting and repair of Heavy Construction Equipment, CAT preferred \n • Must be computer proficient to be able to run diagnostic software and prepare service communications\n, • Must have excellent verbal and written communication skills\n, • Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possesses the ability to plan and efficiently complete assigned tasks \n Successfully provide service of recognized superior value \n • Troubleshoot problems\n, • Efficiently utilize resources to correct problems\n, • Plan proper repair procedures for efficiency\n, • Efficiently utilize tooling and technical resources\n, • Continually improve key processes\n, • Complete/attend all safety meetings, computer-based safety training, safety audits, and other safety training as assigned\n, • Work in a proactive, safe manner in compliance with all safety practices, policies, and training\n, • Immediately resolve and/or report all safety issues to supervisor\n Experience in troubleshooting and repair of Heavy Construction Equipment, CAT preferred \n • Must be computer proficient to be able to run diagnostic software and prepare service communication\n, • Must have excellent verbal and written communication skills\n, • Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possesses the ability to plan and efficiently complete assigned tasks \n, • Standing and walking (including on uneven surfaces)\n, • Sitting, body rotation, and forward bending (in both sitting and standing positions)\n, • Lifting up to 60 lbs. (machine or team lift for items over 50 lbs.)\n, • Carrying up to 50 lbs. for short distances\n, • Push/pull tasks requiring up to 75 lbs. of force\n, • Climbing stairs and ladders (including non-standard access points)\n, • Crawling, kneeling (low work), and working in awkward/tight positions\n, • Strong grip strength (up to 80 lbs. with both hands; up to 30 lbs. with one hand)\n, • Hand coordination and overhead/extended reaching\n, • Operating equipment, machinery, foot pedals, and hand tools\n, • Outdoor work as required (exposure to weather and varying environments)\n

Job Description JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades., • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly., • Explains and demonstrates jobs and tasks to be performed., • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student., • Schedules, organizes, and provides supplemental training when necessary., • Conducts refresher training and make-up sessions when necessary., • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety., • Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum., • Ensures each assigned student follows all safety standards., • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner., • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards., • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school., • Participate and successfully complete all professional development sessions as required by accrediting and state standards., • Participate in all individual career development sessions as required., • Maintain trades licenses as needed per state and accrediting standards., • Functions as an ambassador and liaison for Apex Technical School. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: • Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. • Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: • Basic understanding of theoretic principles and practical application of respective trade concepts and skills., • Oral, written, and presentation communication skills. •, • Establishing and maintaining effective working relationships with staff, supervisors, and students. •, • Problem-solving and conflict resolution skills. •, • Ability to teach and work with a diverse student population with varying skills and abilities. •, • Ability to establish a safe and comfortable learning environment. •, • Effective communication of complex ideas and concepts to students., • Ability to work independently and collaboratively as a team. • #FEDCAPGROUP About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website:

Hours: Monday-Friday 07:00AM-03:30PM Position Summary: Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow AMETEK work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing Education and Experience: • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus Equipment Used: • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments Please note, all Production Floor employees are required to wear steel toe boots. AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. Compensation Employee Type: Hourly Salary Minimum: $55,000 Salary Maximum: $70,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Description JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades., • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly., • Explains and demonstrates jobs and tasks to be performed., • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student., • Schedules, organizes, and provides supplemental training when necessary., • Conducts refresher training and make-up sessions when necessary., • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety., • Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum., • Ensures each assigned student follows all safety standards., • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner., • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards., • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school., • Participate and successfully complete all professional development sessions as required by accrediting and state standards., • Participate in all individual career development sessions as required., • Maintain trades licenses as needed per state and accrediting standards., • Functions as an ambassador and liaison for Apex Technical School. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: • Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. • Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: • Basic understanding of theoretic principles and practical application of respective trade concepts and skills., • Oral, written, and presentation communication skills. •, • Establishing and maintaining effective working relationships with staff, supervisors, and students. •, • Problem-solving and conflict resolution skills. •, • Ability to teach and work with a diverse student population with varying skills and abilities. •, • Ability to establish a safe and comfortable learning environment. •, • Effective communication of complex ideas and concepts to students., • Ability to work independently and collaboratively as a team. • #FEDCAPGROUP About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website:

Job Description JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades., • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly., • Explains and demonstrates jobs and tasks to be performed., • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student., • Schedules, organizes, and provides supplemental training when necessary., • Conducts refresher training and make-up sessions when necessary., • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety., • Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum., • Ensures each assigned student follows all safety standards., • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner., • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards., • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school., • Participate and successfully complete all professional development sessions as required by accrediting and state standards., • Participate in all individual career development sessions as required., • Maintain trades licenses as needed per state and accrediting standards., • Functions as an ambassador and liaison for Apex Technical School. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: • Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. • Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: • Maintain good safety practice throughout the workday, • Conduct and effectively manage daily workload, • Interpret and layout projects according to specifications, • Manage and organize training resources effectively, • Knows the fundamentals of different welding techniques, • Evaluate and conduct tests to determine the soundness/quality of welds, • Maintain good recordkeeping, • Basic understanding of theoretic principles and practical application of respective trade concepts and skills., • Oral, written, and presentation communication skills., • Establishing and maintaining effective working relationships with staff, supervisors, and students., • Problem-solving and conflict resolution skills., • Ability to teach and work with a diverse student population with varying skills and abilities., • Ability to establish a safe and comfortable learning environment., • Effective communication of complex ideas and concepts to students., • Ability to work independently and collaboratively as a team., • Ability to objectively evaluate and grade student performance against established standards as prescribed by Apex and accrediting entities. \n\n About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website:

Job Description JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades., • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly., • Explains and demonstrates jobs and tasks to be performed., • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student., • Schedules, organizes, and provides supplemental training when necessary., • Conducts refresher training and make-up sessions when necessary., • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety., • Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum., • Ensures each assigned student follows all safety standards., • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner., • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards., • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school., • Participate and successfully complete all professional development sessions as required by accrediting and state standards., • Participate in all individual career development sessions as required., • Maintain trades licenses as needed per state and accrediting standards., • Functions as an ambassador and liaison for Apex Technical School. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: • Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. • Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: • Maintain good safety practice throughout the workday, • Conduct and effectively manage daily workload, • Interpret and layout projects according to specifications, • Manage and organize training resources effectively, • Knows the fundamentals of different welding techniques, • Evaluate and conduct tests to determine the soundness/quality of welds, • Maintain good recordkeeping, • Basic understanding of theoretic principles and practical application of respective trade concepts and skills., • Oral, written, and presentation communication skills., • Establishing and maintaining effective working relationships with staff, supervisors, and students., • Problem-solving and conflict resolution skills., • Ability to teach and work with a diverse student population with varying skills and abilities., • Ability to establish a safe and comfortable learning environment., • Effective communication of complex ideas and concepts to students., • Ability to work independently and collaboratively as a team., • Ability to objectively evaluate and grade student performance against established standards as prescribed by Apex and accrediting entities. \n\n About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website:

Job Description JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades., • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly., • Explains and demonstrates jobs and tasks to be performed., • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student., • Schedules, organizes, and provides supplemental training when necessary., • Conducts refresher training and make-up sessions when necessary., • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety., • Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum., • Ensures each assigned student follows all safety standards., • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner., • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards., • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school., • Participate and successfully complete all professional development sessions as required by accrediting and state standards., • Participate in all individual career development sessions as required., • Maintain trades licenses as needed per state and accrediting standards., • Functions as an ambassador and liaison for Apex Technical School. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: • Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. • Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: • Maintain good safety practice throughout the workday, • Conduct and effectively manage daily workload, • Interpret and layout projects according to specifications, • Manage and organize training resources effectively, • Knows the fundamentals of different welding techniques, • Evaluate and conduct tests to determine the soundness/quality of welds, • Maintain good recordkeeping, • Basic understanding of theoretic principles and practical application of respective trade concepts and skills., • Oral, written, and presentation communication skills., • Establishing and maintaining effective working relationships with staff, supervisors, and students., • Problem-solving and conflict resolution skills., • Ability to teach and work with a diverse student population with varying skills and abilities., • Ability to establish a safe and comfortable learning environment., • Effective communication of complex ideas and concepts to students., • Ability to work independently and collaboratively as a team., • Ability to objectively evaluate and grade student performance against established standards as prescribed by Apex and accrediting entities. \n\n About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website:

Job Description JOB PURPOSE: The Trades Instructor will provide job and safety training, demonstrate proper workplace procedures and standards in a classroom setting and/or in regular operating conditions in the workplace, and prepare students to become skilled in their trade while providing a safe, constructive, and positive learning environment. JOB SUMMARY: The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. ESSENTIAL FUNCTIONS : • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades., • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly., • Explains and demonstrates jobs and tasks to be performed., • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student., • Schedules, organizes, and provides supplemental training when necessary., • Conducts refresher training and make-up sessions when necessary., • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety., • Guides, assigns, schedules, and supervises the work of students; ensures work is completed on in accordance with assigned curriculum., • Ensures each assigned student follows all safety standards., • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner., • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards., • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school., • Participate and successfully complete all professional development sessions as required by accrediting and state standards., • Participate in all individual career development sessions as required., • Maintain trades licenses as needed per state and accrediting standards., • Functions as an ambassador and liaison for Apex Technical School. QUALIFICATIONS: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: • Thorough understanding of the correct and safe operation of all manually operated and power related tools and equipment. • Use of safety equipment/apparel. Job Experience: Minimum of 3 years' experience in the trade(s) Knowledge, Skills, & Abilities: • Basic understanding of theoretic principles and practical application of respective trade concepts and skills., • Oral, written, and presentation communication skills. •, • Establishing and maintaining effective working relationships with staff, supervisors, and students. •, • Problem-solving and conflict resolution skills. •, • Ability to teach and work with a diverse student population with varying skills and abilities. •, • Ability to establish a safe and comfortable learning environment. •, • Effective communication of complex ideas and concepts to students., • Ability to work independently and collaboratively as a team. • #FEDCAPGROUP About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website:

Overview: Fleet Maintenance Supervisor- Brooklyn Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Fleet Maintenance Supervisor is responsible for supervising a team of technicians and welders aimed at maintaining the locations equipment/fleet in peak operating conditions with the collaboration and guidance of the Fleet Maintenance Manager. They Provide direction to technicians, welders, and administrative personnel to ensure that all repair/ maintenance work is performed in a safe, efficient, and in a timely manner. The Maintenance Supervisor is responsible for preventative maintenance, and repair of company equipment, as well as administrative duties such as parts procurement, inventory management, asset tracking and cost control. The Maintenance Supervisor utilizes fleet management and onboard computing software to monitor vehicle performance and cost. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Provide direction to A, B, C level, and lead technicians assigned to work group to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner., • Report to management on performance; make recommendations for process/programmatic changes for improvement or efficiencies., • Supervise technicians in maintenance shop, including such responsibilities as conducting daily shop huddles; yard checks; coaching/counseling/ training lead technician and all technician levels on performance/corrective action, when necessary; make hiring/termination decisions in concert with Human Resources and appropriate management; conduct employee training and performance evaluations; evaluate and make recommendations for merit increase, promotion and job changes, as appropriate., • Perform inspections of outside repairs to ensure all work was properly completed in accordance with Company’s safety and compliance procedures and federal and state regulations., • Identify training opportunities and document issues and constructively discuss corrective action, as needed, with technician., • Conduct Quality Control Inspections, track issues and resolution to ensure all work is properly completed in accordance with Company’s safety and compliance procedures and federal and state regulations., • Oversee repair diagnostics on more complex matters and provide coaching, when necessary; may be required to road test vehicles to determine necessary repairs., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive and repair maintenance functions on equipment and vehicles used by Company, on site and on the road, including: engine chassis repair and maintenance; knowledge of vehicle body control systems, including hydraulics and electrical systems to maintain and repair vehicles in a timely and safe manner; knowledge of heating and air conditioning systems to effectively diagnose and repair complex heating and cooling systems in vehicles in a timely and safe manner; and knowledge of welding tools to fix heavy equipment in a safe and efficient manner to ensure equipment is back in an operable condition as quickly and as safely as possible., • Manage related administrative matters for team, including payroll, maintenance of employee records, records of all preventive and corrective maintenance performed, recording of all information into TMT Maintenance Software. Requirements and Qualifications::, • 2+ year experience as a supervisor or foreman/team lead., • Must have experience with Electrical, Air Brakes, Medium and Heavy-Duty Diesel engines and computer aided diagnostics (CAT ET, Cummins Insite, Premium Tech Tool, etc.)., • Strong verbal and written communication skills, Spanish bilingual strongly preferred., • Advanced experience working with fleet management and onboard computing software., • Strong knowledge of DOT CMV rules, OSHA, and other federal and local regulations and requirement, • Valid driver’s license required, CDL preferred Additional Information: IWS’s base pay actually offered takes into account a range of factors including, but not limited to, internal equity, the candidate’s geographic region, job-related knowledge, skills, qualifications, and other business and organizational needs. Bonus: This role is bonus eligible as part of the compensation package. Benefits: IWS employees are eligible to participate in our benefits plan. Should an employee choose to participate, they can choose from a range of benefits to include, but is not limited to, health insurance, retirement savings benefits, paid vacation and holidays, as well as access to numerous voluntary benefits. Any coverages for health insurance and retirement benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $75,000.00/Yr. Salary Range Maximum: USD $95,000.00/Yr.

Hours: Monday-Friday 07:00AM-03:30PM Position Summary: Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow AMETEK work instructions and quality procedures. Duties and Responsibilities: \n • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions\n, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment\n, • Prepare and maintain inspection reports\n, • Program and/or operate Coordinate Measuring Machine\n, • Perform Hardness testing\n, • Collect and tabulate data for SPC use\n, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102\n, • Other duties as directed by the management\n\n Required Skills and Abilities: \n • Basic computer knowledge including MS Excel and Word\n, • Interpret drawing requirements/specs and geometric dimensions and tolerances\n, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards\n, • PCDMIS programming skills\n, • Familiar with special process specifications for heat treat, welding, and non-destructive testing\n\n Education and Experience: \n • High school graduate\n, • 3-5 Years mechanical inspection, aerospace experience\n, • Post high school education in math, engineering, inspection techniques or related fields a plus\n\n Equipment Used: \n • Vernier calipers\n, • Micrometers\n, • Height Gauges\n, • CMM machines\n, • Other standard measuring tools/instruments\n\n Please note, all Production Floor employees are required to wear steel toe boots. AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. Compensation Employee Type: Hourly Salary Minimum: $55,000 Salary Maximum: $70,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

This is an in-house positionnot a road mechanic role. Well-rounded skill set including mechanical, hydraulic, and welding repairs.

Weld ferrous and non-ferrous metals using various weld procedures to include: soldering, brazing, stick welding, MIG welding and TIG welding.Cut metals with oxyacetylene or plasma.Setup and operate welding machines to build jobs to the specifications on prints.Read measuring equipment and interpret

Quality Control Manager and CWI.An industry-leading manufacturer is searching for an experienced.Quality Control Manager and Certfied Welding Inspector (CWI) .Caldwell for an in shop position.They are looking for someone who has a background in manufacturing and structural steel fabrication.An

Job Description Job Summary The Small Engine Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of landscaping and construction equipment, including two-stroke and four-stroke engines, compact equipment, and handheld tools. Key Responsibilities: · Inspect, diagnose, and repair small engines, including lawnmowers, chainsaws, trimmers, blowers, generators, and snow blowers. · Perform routine maintenance, including oil changes, air filter replacements, carburetor adjustments, and spark plug installations. · Troubleshoot electrical, fuel, and mechanical systems to ensure optimal equipment performance. · Maintain service records and track completed repairs using internal systems. · Order necessary parts and ensure inventory is maintained for common repairs. · Communicate clearly with supervisors and operators about equipment status and timelines. · Maintain a clean, organized, and safe work environment. · Assist in seasonal equipment prep and winterization. Qualifications · High school diploma or equivalent; trade school or technical certification preferred. · Minimum of 2 years' experience repairing small engines or related mechanical work. · Strong knowledge of gas-powered and diesel-powered small engines, hydraulic systems, and two- and four-cycle engines. · Ability to read and interpret schematics and service manuals. · Valid driver's license with clean driving record. · Ability to lift 50 lbs and work in various weather conditions. Preferred Skills · Experience with landscaping or construction equipment. · Welding and fabrication skills a plus. · Bilingual (Spanish/English) is a plus. · OSHA 10/30 certification preferred, or willingness to obtain. Schedule & Compensation • Full-time position | Monday–Friday, 7:00 AM – 3:30 PM, • Pay: $24-32 hourly (Depending experience, certifications, and licensing)

Job Description Position Overview We are looking for a talented Electrical & Mechanical Field Service Technician to join our growing team. In this role, you'll be responsible for the installation, maintenance, and repair of automated parking systems, lifts, and related equipment. This is a hands-on position for someone who thrives in dynamic environments, enjoys solving technical challenges, and is passionate about delivering outstanding customer service. What You’ll Do * System Expertise: Master our systems to diagnose and repair mechanical and electrical equipment on-site. * Troubleshooting: Analyze and resolve equipment issues to ensure optimal system performance. * Customer Relations: Establish and maintain positive relationships with clients, ensuring satisfaction and confidence in our technology. * Field Installations & Training: Install systems at client sites and provide comprehensive user training. * Remote Support Collaboration: Work closely with our remote support team to understand issues before arriving on-site. * Preventive Maintenance: Conduct routine inspections and maintenance to prevent downtime. * Safety First: Follow all safety procedures and protocols to maintain a secure work environment. * Efficiency & Innovation: Contribute ideas to improve equipment performance and service efficiency. * Online Support: Use Utron’s proprietary Dashboard system for remote diagnostics and support. Qualifications * Technical Background: Experience with mechanical and electrical systems, ideally including:\n - High-voltage equipment\n - Motors, chains, and conveyor systems\n - Heavy machinery\n - Working in elevated or confined spaces\n\n- Problem Solver: Strong analytical and troubleshooting skills.\n- Team-Oriented: Ability to collaborate effectively with both on-site and remote teams.\n- Communication Skills: Excellent interpersonal and customer-facing communication.\n- Experience & Education: 3+ years in a similar field service role; vocational training or degree in a relevant discipline is a plus.\n- Availability: Flexibility to work evenings, weekends, night shifts, and respond to on-call service needs.\n- Tech Savvy: Comfortable using mobile devices and computers. Nice-to-Have (Not Required) * Welding or forklift experience * PLCs, firmware flashing, and hardware updates * Knowledge of wired/wireless communication protocols Shift Options * Day Shifts: Monday to Friday (7 AM–16 PM) * On-Call: As needed for urgent service calls Company DescriptionUtron is a leading provider of both semi-automated and fully automated parking solutions. We offer a comprehensive range of in-house services, from R&D, engineering, and manufacturing to controls, software development, installation, integration, and ongoing service and maintenance. With over 35 years of experience and innovation, Utron is dedicated to transforming parking experiences, driving real estate improvements for developers, and enhancing the lifestyles of users through state-of-the-art technology. Join us at Utron and take your career to the next level by contributing to groundbreaking projects in a fast-paced, rewarding environment! -\tBe part of a leading company revolutionizing urban automated parking solutions. -\tWork with cutting-edge technologies and highly skilled professionals. -\tOpportunities for career growth and professional development. -\tCompetitive compensation and benefits package.Utron is a leading provider of both semi-automated and fully automated parking solutions. We offer a comprehensive range of in-house services, from R&D, engineering, and manufacturing to controls, software development, installation, integration, and ongoing service and maintenance. With over 35 years of experience and innovation, Utron is dedicated to transforming parking experiences, driving real estate improvements for developers, and enhancing the lifestyles of users through state-of-the-art technology.\r\n\r\nJoin us at Utron and take your career to the next level by contributing to groundbreaking projects in a fast-paced, rewarding environment!\r\n\r\n•\tBe part of a leading company revolutionizing urban automated parking solutions.\r\n•\tWork with cutting-edge technologies and highly skilled professionals.\r\n•\tOpportunities for career growth and professional development.\r\n•\tCompetitive compensation and benefits package.

Job Description Are you looking for a new challenge in your career? Tired of working the same boring job? We’ve got just the change you're looking for, something new, different career path, and stability! Gerhart is seeking a CDL Field Technician with knowledge of heavy capacity weighing equipment to join our team. In this role technicians will specialize in operating a Test Truck/Rig to perform services on weighing equipment in the field. The ideal candidate should have a general mechanical or electrical background, be a self-starter with a solid customer oriented approach. Responsibilities: • Operation of company Test Truck and/or Rig type CDL vehicle to perform a variety of field services including: installation, calibration, testing, and maintenance of customer equipment, often outdoors, • Ability to mechanically and electrically troubleshoot, identify, and diagnose malfunctions and repair weighing equipment related to Heavy Capacity, • Capability of leading projects and being a resource to peers while on job sites, • Comfortable working in all work environments, outdoor industrial settings includes dust, dirt, extreme temps both hot & cold, • Able to work overtime as needed to complete projects within defined deadlines, • Hold a Class B CDL (drivers license), • Familiarity with industrial service tools, and welding experience desirable, • Basic understanding of 120VAC wiring and/or DC signal wiring, • Strong problem solving & critical thinking skills, • Offer exceptional customer service and communicate effectively We are a diverse company providing systems integrations, field service and turn-key installations of Process Automation Systems, Industrial Weighing Equipment, and Process Instrumentation. We are seeking highly motivated candidates to join our team of talented employees and contribute to our continued success and growth. Gerhart is a well-established company with over 90 years’ experience in the industry! Join our company where our people and excellence are essential to our culture. Gerhart Benefits package includes: • Benefits package: various medical options including 100% employer covered benefits, dental, and vision plans, • Paid Time off, • Life Insurance, • Matching 401k

Job DescriptionCatbird is looking for experienced Key Holders to join our retail team in NYC. As a Key Holder, you will be a leader on our store team assisting with the store operations and supervision of staff. About Catbird In our 20 years in business, Catbird has become an icon, the ultimate destination for gifts and jewelry. Founded in Brooklyn, NY, Catbird is a mecca for an international cast of shoppers who come to visit the brick and mortar stores of their beloved website. Both our stores and website are filled with a carefully curated selection of designers, including our in-house line of jewelry. Our Catbird line is made in our Brooklyn studio and with a few trusted partners, using ethically sourced materials and conflict-free stones. Highly trained Catbird jewelers oversee every step of the process. We are dedicated to a return to local manufacturing – what our neighborhood was famous for. Catbird is a proud member of the CFDA, certified Made in New York, and No Dirty Gold. The key to our success is remaining true to our values:-We believe in being an anti-racist organization and actively championing diversity, inclusion, and equity-We believe in making and selling things people will want to keep forever and will bring continuous joy.-We believe in doing everything we can ourselves. -We believe in always thinking of the long game and not focusing on a quick profit.-We believe we are the best at what we do and we work hard to make sure we know how to sustain it as we grow.-We believe in treating everyone (coworkers, customers, vendors) with deep respect, kindness, and honesty.Key Responsibilities • Lead by example and provide support to both customers and team members on the sales floor., • Set the tone for exceptional customer service by leading with professionalism and warmth., • Support team development through coaching, real time feedback, and encouragement., • Contribute to a warm, inclusive, and collaborative team environment that reflects our brand values., • Weld Catbird’s forever jewelry line onto our customers with consistency and care., • Maintain a strong product knowledge to educate customers and make thoughtful recommendations in an authentic and engaging way., • Resolve customer concerns and ensure every experience ends on a positive note., • Assist with opening and closing procedures., • Maintain store presentation by restocking, tidying, and supporting merchandising needs as needed., • Follow safety protocols and company policies to help ensure a safe and respectful store environment., • Bring strong attention to detail and a sense of ownership to both customer-facing and operational responsibilities. Our Ideal Candidate, • Prior retail leadership experience., • Understands the importance of an elevated customer experience, with a passion for creating meaningful, lasting connections., • Naturally warm and personable demeanor. Comfortable initiating conversations and engaging authentically with customers., • Strong alignment with brand values and a genuine interest in the product and the story behind it., • Sales driven and motivated by meeting goals (while maintaining a thoughtful customer experience!), • Dependable, flexible, and adaptable to the changing needs of the store. Availability on weekends, holidays, and blackout periods., • Ability to prioritize effectively in fast paced environments., • Positive attitude and strong interpersonal skills. Enjoys connecting with both customers and team members., • Preferred experience in luxury retail, fine jewelry, or clienteling., • Retail positions involve physical requirements that include standing for extended periods, light lifting, reaching, and repetitive wrist and hand movements during tasks like welding permanent jewelry, etc. We’re happy to discuss reasonable accommodations to support individual needs.Perks & Benefits, • Health insurance with 75% of the medical premium covered by Catbird. 25% of the premium covered for children, • Dental and vision insurance options, • Flexible Spending Account (FSA) for pre-tax contributions to medical and childcare expenses, • Two weeks of accrued vacation and 7 sick days, • Life insurance (1x annual salary) fully covered by Catbird, • Voluntary life insurance and short/long-term disability at reduced group rates, • 7 days of backup childcare (in-home or at a Vivvi childcare center), • Catbird employee discount: 50–70% off the Catbird line and 30% off designer pieces, • 401(k) with profit sharing and safe harbor contributions (eligibility after 90 days), • Parental leave: 20 weeks total, with 12 weeks fully paid, • Pre-tax transit benefits to help save on commuting costs, • Professional development stipend: $200/year, plus access to workshops and talks throughout the year, • The Catbird Foundation: At least 1% of all sales donated year-round to nonprofits aligned with our values—over $2MM donated to date, • Cold brew in the summer, • Team bonding events and happy hours

Job Description Are you a seasoned professional with a passion for customer service, quality, and safety? Join our team as a Lead Field Service Technician! We are seeking an experienced, highly motivated Lead Field Service Technician to join our dynamic team. As a key member of a two-person team, you will work closely with a Technician 2 to deliver exceptional roofing services and repairs at customer job sites. This position requires a blend of technical expertise and leadership skills to ensure safety, quality, and client satisfaction in every job you perform. If you have a strong background in roofing, an eye for detail, and a commitment to maintaining high standards, we want you to be part of our team! Why Join Us? • Competitive Pay: $30 - $40 per hour, based on experience., • Company Vehicle: Provided for applicable positions., • Paid Time Off: After 90 days, • Technology: Company phone and laptop for work use., • Career Growth: Opportunities for professional development and advancement., • Commitment to Safety & Quality: Join a company that prioritizes safety, client satisfaction, and quality service. Key Responsibilities: Team Leadership & Communication: • Lead and mentor Technician 2, ensuring effective coordination of daily tasks., • Maintain open communication with your supervisor and the client’s point of contact (POC)., • Provide clear updates to clients regarding project progress and any changes. On-Site Roofing Services: • Identify and repair roof deficiencies, including leaks, flashing issues, and membrane concerns., • Perform roofing tasks such as tear-offs, insulation installation, membrane welding, and flashings., • Conduct detailed work on roofing components, such as pipes, curbs, and walls., • Ensure strict compliance with manufacturer specifications and safety standards. Vehicle & Equipment Maintenance: • Perform daily vehicle inspections and ensure inventory is up to date., • Promptly report any equipment or vehicle issues., • Operate and maintain all roofing tools and equipment in optimal condition., • Work Generation & Proposals:, • Submit proposals for additional work, including NTE increases, qwikbids, and work expansion opportunities., • Collaborate with the client’s POC to identify potential areas for additional service., • Documentation & Reporting:, • Capture before-and-after photos and detailed descriptions of service activities., • Upload service details to internal applications., • Provide work summaries to clients and complete all required documentation, including timesheets., • Safety & Compliance:, • Ensure strict adherence to OSHA safety protocols., • Valid, clean driver’s license., • Minimum of 2 years of roofing experience or 5 years in the construction industry (roofing preferred)., • Proven leadership skills and experience managing a team., • Strong communication skills for client interaction and team coordination., • Proficiency with mobile applications for service documentation and reporting., • Willingness to obtain any necessary OSHA certifications., • Flexibility to work after hours and weekends as needed.Daily Responsibilities:, • Coordinate and review daily tasks with Technician 2., • Safely drive to job sites and introduce the team to the client’s POC., • Perform inspections, document roof deficiencies, and conduct necessary repairs., • Identify opportunities for additional repairs or services and submit proposals., • Maintain vehicle and tool readiness for each job., • Ensure compliance with safety standards and manufacturer specifications., • Provide clients with work summaries and ensure complete satisfaction., • Complete timesheets and necessary service documentation. If you're a detail-oriented, safety-conscious professional with strong leadership skills, we encourage you to apply and join our team of dedicated experts! To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Nations Roof provides equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information, or any other protected characteristic. Our company is a Drug Free Workplace. No Recruiters. All candidates must be authorized to work in the U.S.

Job DescriptionSERVICE TECHNICIAN Location: Newark, NJ ARC Group is seeking an experienced technician with strong mechanical aptitude to join our client's team in Newark, NJ for a hands-on role focused on the repair and maintenance of compressed air equipment. This position offers stability, growth potential, and the opportunity to work with a team that values craftsmanship and precision. Join a respected leader in industrial systems servicing and repair! Pay Range: $30$45 per hour (Based on Experience) Benefits: Comprehensive Insurance Package | 401(k) with Match What You'll Do: • Conduct teardown and inspection of returned industrial air equipment, • Diagnose mechanical issues and evaluate failure causes with precision and accuracy, • Collaborate with internal teams to provide clear, written documentation on findings and service recommendations, • Take detailed measurements of worn parts to determine suitability for reuse or replacement, • Follow schematics and service manuals to rebuild compressors to OEM standards, • Operate and maintain workshop tools including welding equipment, sandblasters, band saws, and drill presses, • Interpret engineering drawings for component assembly and fabrication tasks, • Utilize overhead cranes and forklifts safely to move equipment and parts, • Keep your work area organized and ensure all activities align with safety protocols, • Provide training and guidance to customer personnel in the shop environment as needed What You Bring: • High school diploma or equivalent (GED) required; technical certifications in industrial maintenance or safety are highly valued, • At least 5 years of hands-on experience maintaining or repairing compressors, blowers, pumps, or other industrial machinery, • Strong troubleshooting skills and ability to follow detailed technical drawings, • Comfortable working with 3-phase electrical systems and various shop tools, • Physically capable of lifting up to 70 lbs and standing, bending, and kneeling for extended periods, • Safety-minded, organized, and an effective communicator, • Strong team player with a customer-first attitude and reliable work ethic Why You'll Love Working For our Client: You'll be part of a highly reputable company that invests in people and tools. This role gives you access to the latest diagnostic equipment, strong team support, and a clear path for growth. Leadership values technical skill and customer dedicationand rewards both. Equal Opportunity Statement ARC Group is a Forbes-ranked Top 20 recruiting and executive search firm, serving clients nationwide with premium technical and operational talent solutions. We are committed to understanding both client and candidate goalsand building long-term success through partnership and trust. ARC Group is proud to be an equal opportunity employer. We are dedicated to building a diverse and inclusive team and encourage applications from all backgrounds. We are a no-fee agency to candidates.

Job Description • We are hiring immediately for full time SERVICE TECHNICIAN positions., • Location: Coffee Distributing Co. - 200 Broadway, New Hyde Park, NY 11040 Note: online applications accepted only., • Schedule: Full time schedule. Monday - Friday, 7:00 am - 3:30 pm. More details upon interview., • Requirement: Must have maintenance/troubleshooting/diagnostic skills, strong customer service skills, and strong time management skills. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Repairs, maintains and assists in the installation of vending machines and equipment. Essential Duties and Responsibilities: • Responds to dispatch calls for machine repairs using company-owned vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to determine causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines; maintains equipment inventory., • Prepares machines for installation at accounts; assists in installations and removals., • Sets up and operates mechanical equipment and small hand tools, such as drills, grinders and welding torches, for machine repair. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here for information on additional company-provided time off benefits. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1464053 Canteen We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.