Trabajos materials en Derby - Page 2Crear alertas

Laminator - Flexible Packaging Location: Derby Salary: Dependent on Experience Shift Pattern: 6-2pm/ 2-10pm - Monday to Friday About the business: Our client is a leading print and packaging company that manufactures flexibles and sustainable solutions. Now looking for an additional Laminator to join the growing team. Overview: A Lamination Operative knows how to operate and set up a laminating machine and is responsible for producing finished goods to customer specified dimensions. The role supports operations in manufacturing to ensure that the Company Sales and Profit Targets are achieved and exceeded. The machine operative will work in a constructive manner, promoting co-operation with all site colleagues and always ensuring compliance of Health and Safety requirements. Role: Maintain all housekeeping standards to ensure care and maintenance of equipment and sustain an organized, clean work environment free from debris and hazards. Effectively set up and run a lamination machine to customer's specification. Ensure that all instructions for the safe operation of any equipment is followed, and PPE is worn, as required. Carry out pre-inspection and ensure any malfunctions of equipment or difficulties with any job are reported immediately to your direct manager. All quality guidelines must be followed accurately, and all specific customer requirements met as instructed. Ensure quality checks and standards are always maintained. Carry out daily water inspections. Carry out daily glue ratio checks and ensure they are recorded on the designated paperwork. Lamination Pads to be inspected prior to use and any sub-standard or damaged pads reported to the Production Manager. Coat weight checks must be understood and performed as per inspection sheet. Accurately record production data Meet/exceed targeted standards and correct non-conformances. Perform preventative maintenance on machines as required in accordance with scheduled PPM. Any major hour PPM inform your direct manager. Work safely, following all safety policies and good working practice. Follow all procedures to ensure BRC & FSC requirements are adhered to at all times. Perform any miscellaneous duties requested by supervisor or management. Establish/maintain cooperative effective working relationships with a positive attitude to teamwork. Maintain Health and Safety standards throughout all areas of the business. Ensure to report all Health and Safety concerns, near misses and incidents to your direct manager and assist in the investigation of any such occurrences. Requirements: Previous experience of working with lamination machines is a must Knowledge of flexible materials Previously from a flexible packaging background Understanding of flexographic print is desirable Willingness to take a flexible approach to work Meticulous attention to detail Ability to remain calm when working under pressure Strong mechanical/technical skills and ability to run high-speed machinery Great attention to detail and problem-solving abilities Comfortable working in a fast-paced environment Reliable, proactive, and a strong team player Solid organisational skills and a willingness to learn Strong communication skills (written and verbal English essential) Competent in basic IT systems TO APPLY please email your full CV details and portfolio to us and we will be in touch. All applications are strictly confidential and your details will not be shared with any organisation without your express permission and consent

Job Title: Firestopping Contracts Manager Job Summary The Firestopping Contracts Manager is responsible for managing the delivery of firestopping projects from contract award through completion. This role ensures works are delivered safely, on time, within budget, and in full compliance with FIRAS certification, fire safety regulations, and project specifications. Key Responsibilities • Manage multiple firestopping contracts from pre-start through final handover, • Oversee site teams, supervisors, and subcontractors to ensure quality and productivity, • Ensure all works comply with FIRAS requirements, tested systems, and approved details, • Review drawings, specifications, and fire strategies to confirm scope and compliance, • Coordinate with main contractors, consultants, and fire engineers, • Plan labour, materials, and access requirements to meet programme deadlines, • Conduct site inspections, audits, and quality checks, • Ensure accurate installation records, photographic evidence, and as-built documentation, • Manage variations, valuations, and commercial performance with the commercial team, • Promote and enforce health & safety standards across all sites, • Support project close-out, certification, and handover documentation Requirements • Proven experience managing firestopping or passive fire protection contracts, • Strong knowledge of firestopping systems, installation methods, and sequencing, • In-depth understanding of FIRAS certification and compliance requirements, • Ability to read and interpret construction drawings and specifications, • Knowledge of UK fire safety legislation and relevant standards, • Strong leadership, organisational, and communication skills, • Ability to manage multiple projects simultaneously, • Competent with project reporting and basic commercial controls Preferred Qualifications • FIRAS-trained or experience working within a FIRAS-certified contractor, • SMSTS / SSSTS, • First Aid at Work, • Passive Fire Protection qualifications or manufacturer training

Design Engineer The successful Design Engineer candidate will have experience within any area of the structural steelwork, sheet metal, metalwork or manufacturing derivatives. You will have a mechanical engineering qualification and experience in a similar role. You will also have experience in the use of Inventor, iLogic and Skeletal Modelling. There is one day working from home a week, with a 37.5 hours working week. Due to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is searching for a talented and motivated Design Engineer who is a technical self-starter treating 3D modelling (using Autodesk Inventor) as engineering logic. You will understand that the value of a model lies in its stability, preferring Skeletal (Top-Down) methodologies to eliminate the inefficiencies of "brittle" bottom-up assemblies. You will be given the autonomy to establish high-performance, automated workflows across a diverse range of challenging projects, from acoustic enclosures to complex structural steelwork. You will be building digital systems that drive our client’s physical production, in addition to day-to-day work for new design for manufacture contracts. The Role • Support the design department in establishing robust, parametric frameworks for both bespoke contract work and batch production, ensuring a "Right First Time" approach., • Serve as a guardian of technical accuracy, ensuring that high-fidelity models and drawings reach the factory and site teams with zero-error tolerance and on schedule., • Act as a technical bridge between Design, Projects, and Production, ensuring that your digital logic translates into a seamless procurement and manufacturing phase., • Proactively utilize iLogic and Skeletal Modeling to transform design standards into a strategic asset, directly contributing to the business's long-term efficiency and competitive edge., • Creation of Master Skeleton models to drive General Arrangement drawings, ensuring client approvals are based on stable, parametric geometry., • Generation and issue of high-precision manufacturing models and drawings, • Production of specialized design information for site installation teams, specifically leveraging Sheet Metal and Frame Generator for 1:1 build accuracy., • Proactively considering design alternatives to improve project performance, focusing on speed of construction and "Design for Manufacture" (DFM)., • Utilizing 3D analysis to highlight design issues or clashes to Project Managers and stakeholders before they reach production., • Partnering with Project Managers and Business Development to provide technical design support and visualizations for winning new work., • Undertaking initial site surveys and measures to capture the accurate data required to ground the Master Skeleton model in real-world constraints., • Maintaining Financial Control by ensuring all designs align strictly with client specifications and project budgets to avoid "scope creep.", • Generating technical schedules and intelligent Parts Lists to ensure the purchasing team can secure materials and equipment within project timescales., • Executing any other duties required to ensure the smooth delivery of the Projects department's goals The Person • The successful candidate will possess a mechanical engineering qualification and demonstrable experience in a similar role, • Work under your own initiative with a strong team-working ethic, contributing to a dynamic group and setting the standard for design excellence., • Maintain a strong understanding of CDM regulations, ensuring all designs proactively account for health, safety, and environmental factors during manufacture and installation., • Maximise the use of IT systems (Inventor/Vault/ERP) to ensure accurate, robust, and auditable project control., • Work to attain optimum performance and efficiency within the Project Team and all associated areas of design responsibility., • Act as a clear and effective communicator (written and oral), bridging the gap between complex 3D logic and practical project requirements, • Promote and represent the Company at all times, setting a high personal example of professionalism and technical integrity., • Proactively contribute to a harmonious and productive working environment through effective communication and team-working techniques., • Adhere strictly to all Company policies, including HSWEQ and ISO procedures, • Undertake duties consistent with your employment in full accordance with UK / international laws, • Complete tasks and responsibilities as assigned, to support evolving business needs., • The ability to visualize 3D space and mechanical movements, • Minimum of 1 year experience in the use of Inventor 3D software with evidence of use, • Demonstrable experience in Skeletal/Top-Down Modeling and iLogic automation and knowledge of Frame Generator, fold logic, and K-Factors., • Ability to build "unbreakable" parametric models where one change updates the entire assembly., • Able to translate complex technical models into clear instructions for site and factory teams Our Client Our client is a market leading design, build, installation, fabrication and maintenance organisation operating at the cutting edge of engineering excellence driven and supported by a passion for innovation. They have continuously diversified and expanded their expertise, enabling them to deliver a huge range of advanced engineering solutions for the Aerospace, Marine, Energy, Infrastructure and Automotive sectors, amongst many others. They not only always complete projects successfully and to the highest of standards but also add value to their clients by giving total support from the beginning to the end of every contract. An attractive basic salary plus extensive benefits package is on offer to the successful candidate, along with longevity and security of work and forward career progression given that our client possesses a significant contract pipeline for the long-term future and is firmly committed to continued growth over the next 5-10 years

Temporary Inventory Controller Location: Central Derby Pay: £15.80 per hour | Hours: 40/week | Weekly Pay (Equivalent to £32,864 annually) Immediate start - Temp ropportunity SF Recruitment are looking for a Warehouse/Inventory Controller to join a busy stores team in Central Derby. You'll help set up a new automated inventory system, including creating locations and barcodes across thousands of areas. Working alongside colleagues to keep stock organised, logged, and accurate. Key tasks: Receive, store, and issue materials; match goods to POs Maintain accurate stock records using MRP/WMS systems Load/unload deliveries with a forklift Organise stores to optimise efficiency Support general warehouse and workshop duties What we need from you: Warehouse/stores experience Experience with inventory control Forklift licence - essential Familiarity with MRP/WMS systems Strong organisation, attention to detail, and initiative If you are immediately available and have the relevant experience for this role, please apply today

Civil Engineer - Aviation Infrastructure Derby £40k-£45k plus benefits Our client is seeking a talented and ambitious Civil Engineer to join their growing aviation infrastructure team. This is a rare opportunity to work at the forefront of airport engineering, contributing to technically challenging and highly specialised projects that support aircraft operations. The successful candidate will have either existing experience in aviation engineering or a genuine desire to transition into the sector. Our client welcomes engineers with strong transferable skills, particularly from highways or infrastructure design, who are confident in their civil engineering fundamentals and capable of quickly adapting to aviation-specific standards. The role will involve the design of airport pavements, including aprons, taxiways and pavement alignments, alongside associated earthworks and groundworks. Engineers will work with both concrete and asphalt materials, applying innovative materials technology to create durable, high-performance pavements capable of accommodating the full range of aircraft traffic and climatic conditions. This is an opportunity to be involved in technically rigorous design work that directly influences the safety, resilience and efficiency of major aviation facilities. The position requires proficiency in AutoCAD, Civil 3D and InfoDrainage, with experience in AviPlan considered advantageous. However, full training in AviPlan will be provided. The successful candidate will benefit from the guidance and mentorship of experienced aviation professionals, gaining exposure to relevant industry codes and standards and developing specialist expertise within a supportive and collaborative environment. Our client is looking for an engineer who is not only technically capable but also motivated to learn the intricacies of aviation infrastructure. Candidates must be eligible to obtain security clearance and demonstrate a proactive approach to professional development. This is a highly desirable opportunity for a civil engineer seeking to carve out a niche within a prestigious and technically demanding sector. The role offers long-term career progression, exposure to innovative design practices and the chance to contribute to infrastructure that operates at an international standard. Want to learn more and be considered? Send your CV to Graham Ventham at Conrad Consulting

Job Title: TIG Welder / Skilled Welder Location: Derby Job Type: Contract Pay Rate: £28 per Hour PAYE TIG Welder Required - Clean Room Environment We're looking for an experienced TIG Welder / Skilled Welder to join a specialist manufacturing company based in Derby. This is a great opportunity to work within a modern clean room factory environment on a contract basis, with competitive rates available depending on experience. The Role: TIG welding to a high standard on stainless steel and/or thin gauge materials Working within a controlled clean room manufacturing environment Fabricating and assembling precision components Reading and interpreting technical drawings Ensuring all work meets quality and safety standards Maintaining a clean and organised workspace Requirements: Proven experience as a TIG Welder Ability to produce high quality, clean welds suitable for regulated environments Experience working in precision engineering or clean room settings (desirable) Strong attention to detail Able to work independently and as part of a team Relevant welding qualifications (advantageous but not essential) If this sounds like something you'd be interested in, or you'd like a confidential conversation to find out more, please get in touch contact Kim on (phone number removed) --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website

Lead Technician Location: Etches Park Depot, Deadmans Road, Derby 12+ Month Initial Contract Pay: £26.92 /hour PAYE £35.98 /hour Umbrella Hours: 4 on 4 off shift pattern. 10 Hour shifts. Combination of Days & Nights (E.g. - 4 days, 4 off, 4 nights) • Opportunity for overtime, Paid at 1.25% This role falls inside IR35 - payment via PAYE or Umbrella Company Function of Role To service, complex fault find and repair Hitachi rolling stock assets Key Responsibilities Maintain the condition of the work site, materials and equipment Adhere to health, safety, environmental & quality practices in the workplace Prepare for and undertake planned and unplanned maintenance activities Confirm that traction and rolling stock assets comply with operational specifications by the use of engineering processes and techniques Read and extract information from traction and rolling stock drawings and specifications Prepare for and undertake the removal and replacement of traction and rolling stock components Modify or manufacture traction and rolling stock components by material removal using hand tools Assemble traction and rolling stock components using engineering processes and techniques Install new traction and rolling stock components using engineering processes and techniques Identify, assess and rectify defects and discrepancies on Hitachi rolling stock assets Identify repeat defects on Hitachi rolling stock assets and suggest / carry out repairs Create technical scopes of work for fault rectification by other members of staff Support reliability technicians with regards reliability improvements to rolling stock assets Attend and provide technical support with failures in service when on duty Provide operational support to users of Hitachi rolling stock assets Keep SAP record system up to date with clear and concise information of work carried out. Develop professionally and support good working relationships Learn new skills in accordance with Hitachi's new business demands as required Liaison with Hitachi and external personnel as required to complete the duties of the post Other responsibilities relevant to the role based on localised requirements Essential Licences / Competences Network Rail Sentinel PTS Time Served Rolling Stock Experience with mechanical, electrical disciplines. Engineering based NVQ level 3 HNC Engineering (Desirable) Experience of working a 24/7 shift roster in a modern rolling stock maintenance depot environment. Outstanding Safety Awareness gained in an operational railway engineering environment. Experience of working at stabling outstations or main line station technical support. Modern fault finding and repair techniques using pc-based laptops and remote train diagnostics. Extensive experience of modern maintenance management systems (MMS) and associated reliability and available trend analysis. Experience of performing modifications and campaigns on modern rolling stock. Behavioural Can comfortably work within a team or on their own Sound knowledge of, and compliance to, rules and regulations (internal and external) Able to always represent Hitachi in a professional manner Calm and diplomatic under pressure. Ability to investigate complex electrical and mechanical faults and write detailed reports. Excellent written and verbal communication skills Able to interface effectively with all levels of personnel both within and outside the company. Loyal, committed, confident and determined. Desirable Licences / Competences Manual Handling COSHH Working at height Powered plant, and tools. Intermediate IT skills - typically Word, Excel, Power Point, Outlook Reading electrical, pneumatic, mechanical schematics and drawings reading Powered plant and tools - bogie drop, cranes, air systems / 110v tools. Depot Protection AC/DC Depot isolationRequirements Live within commuting distance (1 hour) of Etches Park Depot Right to work in the UK and able to provide proof of qualificationsCompliance This is a safety-critical role. Candidates must pass a drug & alcohol test and comply with strict Health & Safety controls. For more information, a full Job Description and also for immediate consideration, please apply by sending your CV to Jake Parker at Rullion: This contract is being advertised by Rullion Ltd. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. Rullion is a forward-thinking recruitment company that specialises in providing a wide range of talent consultancy services to a diverse client base; from small start-ups to large household names. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Job Purpose: To effectively supervise the day-to-day operation of the site maintenance team and to ensure that compliance with standards are adhered to at all times (mandatory and statutory), to ensure the effective and efficient operation of the contract's Mechanical, Electrical and Fabric services. Key Tasks: Ensuring the efficient and effective operation, maintenance and repair of the sites M&E Plant and Equipment and Fabric Services. Management of the CAFM System to ensure staff's performance and monitor service delivery. Compliance with and record keeping for the client system and management of the Quality, Health, Safety + Environment responsibilities on the site. Organise and carry out reactive repairs to the sites M&E systems. Prioritising and completing reactive and Planned Preventative Maintenance tasks and reporting to the site lead, ensuring optimum levels of service delivery are being achieved. Ensure that Planned Preventative Maintenance is carried out in line with task schedules and industry best practices. First line supervision of Specialist Service Contractors, including Induction and signing off and actioning minor works listed on service report sheets in conjunction with the Contract Manager. (Includes surveys) Formulating, Assessing and Validating Risk Assessments, Method Statements, and Work Package Plans. Keeping an up to date log of Work Package Plan's to ensure that the contract remains compliant. Ownership of own tasks, organising of own materials / quotations from suppliers to enable completion of tasks Attendance of company meetings or training courses as required Operational day to day requirements from client or Supervisor / Manager Available for out of hours call outs as required / as per schedule / Rota Conducting contractor monitoring audits Responsible for raising & closing out hazard observations in live environment Following of operational processes to facilitate in efficient operation of the contract Assist the contract / business in creating innovative tools or creating new innovative ideas to facilitate the maintenance to the contract. Adherence & application of organisational policies and procedures. Decision Making/Budgetary Control: Reporting to Contract Manager / Accountable to Contract Manager Financial Authority Level £1,000.00 Decision making must be in line with facilitating completion of the 'key tasks' outlined above and any objectives set by the Contract Manager Success Measures/Objectives: Contract KPIs met Contract SLAs met Staff's performance is of high standard The Quality, Health, Safety + Environment responsibilities are managed Contract is statutory compliant Completion of Planned Maintenance + Reactive works are completed effectively and efficiently Sub-contracted services are carried out, managed efficiently and effectively as per the schedule Core Competencies: Responsiveness Reliability Understanding the customer Accessibility Competence to Deliver Innovation Person Specification Skills: To operate the CAFM system to be able to compile reports. Able to organize work load for team and manage the completion of the planned & reactive tasks. Able to compile quotations via webquote and forward to the customer Able to complete and review site specific risk assessments. Able to compile and manage the Log Book system and encourage management of the log books through the team. Able to upload and effectively manage the E-Log book system Able to be mobile and respond to any urgent queries from the customer which may require site attendance Desirable Educated to a minimum of City & Guilds or equivalent in an electrical discipline IOSH Managing Safely Knowledge: Good understanding of the CAFM system Understanding of Statutory & Mandatory Compliance Understand the customer's requirements in line with the contract scope Desirable Knowledge of operations of plant and related equipment Experience: Strong with first line supervision of staff, able to task manage, motivate and boost team performance. Needs to be able to maintain high standards of service levels with the team Client facing, to be able to work in different environments and be able to communicate with different internal and external customers Desirable At least two years at a similar level or equivalent. Knowledge of current technical standards in relation to Fire Alarm Systems, Generators, Electrical Services, HV & AC and Water Systems Treatment. Knowledge of Lifts and associated services Excellent knowledge of the operation of Mechanical & Electrical Services and plant. Ability to interrogate and operate BMS's systems Knowledge of business critical services i.e UPS and Comms Rooms etc. Attitudes: Needs to be a good team worker, self starter, requires little supervision for completing the task, good problem solver, motivator to the team, Organised, able to prioritise and deliver within high pressure, business critical environments, Committed to the delivery of excellent customer service

GBR Recruitment Ltd, are delighted to be working exclusively with a construction & utilities client in the East Midlands, recruiting for an experienced permanent Procurement Manager to join the commercial / operations team within their growing business. You must have procurement / commercial experience in: concrete (inc. Volumetric concrete), utilities, street works & plant machinery (inc. lifting / crane hire). This role could suit someone working as a Procurement Specialist, Procurement Analyst, Purchasing Manager, Category Manager, Supply Chain Manager, Materials Manager, Commercial Executive or Contract Manager, the client may also consider someone stepping up from a Buyer role with the right knowledge listed above. Purchasing Management Responsibilities: • Strategic purchasing – identifying, vetting, negotiating, and managing nationwide suppliers. Produce and maintain a PSL including Schedule of Rates for the Commercial and Build teams to work from., • Cost control – regularly review pricing including annual rate increases, own invoice queries and challenge overcharges. Proactively implement any cost saving initiatives., • Supplier relationships - performance reviews and negotiation. Revisit suppliers post tender to negotiate improvement on costs. Negotiate long-term and short-term agreements, develop and maintain relationships., • Operational procurement control – managing on/off-hire logs, ensuring cost discipline within the scope. Maintain relevant industry knowledge to effectively plan and forecast buying requirements, identify market risks, opportunities, and supplier capabilities. Ensure that materials and services are bought on time and to the required specification requested from the PM/BMs., • Contract management - Ensure all supplier terms are aligned with contractual and financial requirements, set SLAs, allocate risk., • Risk and compliance – own insurance claim investigations after theft or damage working to protect the businesses interests. Ensure supplier training and insurances meet contractual requirements and organisational standards., • Cross-functional integration – coordinating with commercial teams during tender development and with operational teams on day-to-day delivery. Work with service delivery and back office or stores teams. Be the holding Groups point of contact for Procurement. Ensure that materials and services are bought in OTIF and to the required specification, quantity and quality requested from the SMT. Attributes: • CIPS qualified or working towards it or time served in a Procurement, Purchasing, Buying or Commercial Management capacity., • Procurement / commercial experience in: concrete (inc. Volumetric concrete), utilities, street works and plant machinery (inc. lifting / crane hire)., • Experienced in all the above listed duties., • Working within in a Group experience would be ideal, but not essential., • Strong user of differing systems and software, • Tenders, Bids and PSL experience., • Strong negotiation skills with suppliers and customers, • Strong in delivering effective cost saving initiatives, • Risk management experience If you are in a Procurement, Purchasing, Buying or Commercial Manager role, then this could the right career move for you, working for a modern highly progressive business, that is going from strength to strength year on year. This role does offer 1-2 days hybrid working from home after the completion of the 6 months probationary period, once all working processes and procedures are known. The Procurement Manager position is commutable from Leicester, Nottingham, Derby, Coventry, Uttoxeter, Castle Donington, Burton upon Trent, Loughborough, Lutterworth, Daventry, Crick, Market Harborough, Grantham, Newark, Worksop, Retford, Mansfield, Birmingham & areas located close to these across the East Midlands etc. Interviews to take place immediately for the right Procurement professional. Apply today

Senior Estimator Location: Derbyshire (site-based with travel as required) Contract: Full-time, permanent Reporting to: General Manager Salary: Competitive salary (negotiable dependent on experience) Additional: Performance-related bonus The Company Linsco are delighted to be supporting our client, a long-established specialist joinery business known for delivering high-quality bespoke joinery, heritage works and complex unique projects. Following a recent change in strategy, the business is strengthening their commercial capabilities and are now looking to appoint an experienced Senior Estimator to take ownership of estimating and pricing within their Bespoke Joinery division. For the right individual, this role offers genuine scope to grow into broader estimating and contracts-related responsibilities as the business continues to expand across multiple sites. The Role This is a hands-on estimating position, ideal for someone who enjoys being close to the detail. You will spend the majority of your time pricing work, building accurate labour and material costings, and supporting the business in securing the right projects at the right margin. You'll work closely with clients, architects, contractors and internal production teams to ensure robust pricing, clear scope definition and smooth handover from tender to delivery. You'll help the business secure profitable work while protecting margins through strong commercial awareness and disciplined pricing. Key Responsibilities Estimating & Pricing Take full ownership of estimating and quoting bespoke joinery projects Review drawings and specifications and undertake site surveys where required Build detailed cost plans covering labour, materials, subcontractors and margin Prepare and submit tenders, quotations, clarifications and exclusions Liaise with clients, architects and contractors throughout the tender processCommercial Support Support contract set-up by clearly defining scope and exclusions Assist with pricing variations during project delivery Work closely with production and installation teams to ensure a smooth handover Review completed projects and feed lessons learned into future pricingOversight & Continuous Improvement Help standardise estimating assumptions and pricing methodologies Improve estimating processes, templates and documentation Provide estimating oversight across both sites where appropriateWhat You'll Need Proven experience as an Estimator within joinery sector Comfortable spending the majority of your time estimating and pricing Strong understanding of labour build-ups, material costs, margin and risk Commercially astute and confident in challenging scope and assumptions Highly organised, detail-focused and collaborative Ambitious and keen to grow with the business as opportunities ariseWhat's You'll Get Competitive salary Performance-related bonus 20 days annual leave plus bank holidays Pension scheme Laptop and mobile phone Mileage paid for site visits A pivotal role within an ambitious and growing business, with clear progression potential Applications If you feel that you have the relevant experience to be successful in this position and would like to find out more, please apply online today, attaching a copy of your current CV. Due to the vast number of applications that we receive, it is not possible for us to contact all applicants; therefore, only suitable candidates will be contacted. If you do not hear anything back within 7 days of submitting your application, you have unfortunately not been selected. Linsco is an equal opportunities employer. All applicants will be considered on their merits regardless of background, characteristics or personal circumstances. All applications will be dealt with in the strictest confidence

Joinery Estimator Salary: £35,000 - £45,000 DoE A specialist manufacturer of high-end bespoke joinery is seeking a Joinery Estimator to join their team. The business delivers complex joinery packages across luxury residential and commercial projects, manufacturing bespoke items in-house before installation on site. This is an excellent opportunity for an estimator with an understanding of bespoke joinery manufacturing and fit-out to play a key role in securing and pricing high-value projects. They will also consider candidates who have a couple of yeas experience and offer training. Role Overview The Joinery Estimator will be responsible for reviewing tender documentation, preparing accurate cost estimates, and working closely with design and production teams to develop competitive bids. The role requires an understanding of joinery manufacturing processes, materials, and installation requirements. Key Responsibilities Review tender documentation, drawings, and specifications to understand project scope Prepare accurate cost estimates for bespoke joinery packages Produce detailed take-offs and material schedules Work closely with design, production, and project teams to develop cost-effective solutions Prepare tender submissions and supporting documentation Liaise with clients, contractors, and consultants during the tender process Requirements Previous experience as a Joinery Estimator within bespoke joinery, cabinetry, or interior fit-out would be ideal Knowledge of joinery manufacturing processes and materials Ability to interpret architectural drawings and technical joinery details Strong commercial awareness and attention to detail Excellent communication and organisational skills Opportunity This role offers the opportunity to join a highly skilled manufacturing environment producing bespoke joinery for premium projects. The successful candidate will play a key role in supporting business growth by delivering accurate and competitive tender submissions

We are recruiting for a Purchasing and Logistics Officer for our client located 20 mins from Derby City Centre. The successful applicant will be a key member of small but fast-growing business who supply to a global customer base. The Purchasing and Logistics Officer role involves managing the acquisition of goods and services, ensuring efficient movement of materials, and managing inventory and transportation of products. The role includes sourcing suppliers, negotiating contracts, processing purchase orders, managing inventory, and optimizing logistics operations. This is a great opportunity for an enthusiastic, pro-active and capable candidate with a confident approach to join a niche engineering firm. What you will be doing! The Purchasing and Logistics Officer is responsible for ensuring that the production processes deliver quality products in a timely manner. Managing all day-to-day manufacturing activities. Providing direct supervision and leadership to the team, allocating work, and communicating any issues, progress, and achievements to the team. Anticipate, analyse, and diagnose production problems to coordinate corrective actions. Continuous assessment and improvement of processes, efficiency, utilisation, and productivity. Maintaining compliance with all regulations including Health & Safety and Company rules and procedures Reporting to: Operations Manager Main Job Tasks and Responsibilities • Preparing and processing purchase orders., • Negotiating with suppliers to secure the best prices and terms., • Managing inventory levels to ensure sufficient stock and minimize waste., • Planning and coordinating transportation of materials., • Ensuring compliance with relevant regulations and policies., • Developing and implementing procurement and logistics strategies. Education and Experience • Bachelor degree in procurement, logistics, supply chain management or a related field., • Supply chain management professional designation (SCMP)., • 1-3 years experience in a similar role and industry., • Excellent communication skills in English required (speak, read and write); ability to communicate in French, considered an asset., • Excellent attention to detail., • Strong and effective negotiations skills., • Proven organizational and time management skills., • Ability to analyse complex situations and solve problems; demonstrated ability to make sound decisions., • Ability to multi-tasking, adapt and take initiative., • High tolerance for a fast pace working environment and ability to effectively manage stress., • Proficient with MS Office suite (Word, Excel & PowerPoint, etc.)., • Ability to learn new systems and software with ease (eg. ERP system)., • Ability to maintain constant communication and collaborate with stakeholders (e.g., operations, customer service, etc.). Key Competencies • Ability to learn detailed technical information and be able to interpret complex requirements., • Self-motivated, • Proficient in managing production operators., • Outstanding communication skills, • Competent IT skills, • Must have own car and Full UK licence., • Candidates will be background checked and security vetted so must be confident of passing the required check. Hours of Work: Days - 38 hour week flexible start time from 8 - 9 am. 1 day per week hybrid working after training period completed. Salary: Negotiable based on previous experience and in line with local hiring insights. If you feel your experience and qualifications match our clients requirements we urge you to apply for this role

Junior / Assistant Quantity Surveyor - Construction / Civils Derby £28,000 - £35,000 Are you currently working towards a HND / HNC or construction related degree? We have a fantastic opportunity for a Junior / Assistant Quantity Surveyor to join a Construction Civils Contractor in the East Midlands. Working between the East Midlands Office and site projects, working with the Commercial Team and the Commercial Director ensuring projects are completed on time, within budget, and to the highest standards. With mentorship and hands-on experience, you will have the opportunity to advance your career in quantity surveying. Responsibilities Preparing and submitting applications for payment to clients. Pricing variations and maintaining accurate cost tracking. Issuing notifications to clients in line with contractual obligations. Coordinating the issuing and management of construction drawings. Supporting the preparation and finalization of valuations and accounts. Monitoring project budgets and conducting detailed cost analysis. Assisting with the procurement of materials and subcontractor services. Requirements Experience in groundworks, construction, or a related field (preferred but not essential). HND/HNC qualification or actively working towards a construction-related degree. Strong numerical and analytical skills. Excellent communication and organizational abilities. Proficiency in relevant software (e.g., MS Office, project management tools). A proactive and problem-solving mindset. Valid UK driving license. This is a full-time, permanent opportunity

Role: Structural Engineer Location: Derby Salary: £34,000 to £43,000 Ref: MAR870 About the Role: We have an opening for an experienced Structural Engineer to join our clients’ team at their Derby office to undertake designs on a variety of projects, from small domestic extensions to large, multi-storey apartment and office developments. Working alongside colleagues within the local office as well as those in other parts of the country, you will be encouraged to develop your design experience and skills and be supported to obtain accreditation to the Institute of Structural Engineers. With project costs up to £12m and the use of the latest design software, the role offers an exciting opportunity to engage in impactful, high-value projects. A competitive salary will be offered, commensurate with the importance of this role within the company. Responsibilities: • Use latest design software to create and manage structural designs., • Liaise with key clients and discuss design/technical solutions with team members, • Prepare calculations, drawings, details, specifications and reports for a wide range of structures and materials, • Develop existing customer relationships., • Assist in achieving targeted revenues from current and new customers. Qualifications: • Bachelor’s degree in Civil or Structural Engineering or equivalent (Masters’ degree preferred)., • Minimum of 2 years of professional experience in structural engineering in the UK, • Chartered Engineer status (CEng) would be advantageous, • Proven track record of cost estimation and project management., • Prior experience working with concrete buildings is highly desirable. On offer: • Competitive salary, • Benefits such as health and wellness programs, professional development opportunities, and family-friendly policies., • Diverse portfolio of projects with unique structural challenges., • Career progression opportunities within a growing company. Eligibility to Work in the UK: Please note that this role requires applicants to already have the right to live and work in the UK. Unfortunately, our client is unable to offer sponsorship or consider overseas applicants for this position at this time. What to do next: If you are interested in this Structural Engineer position in Derby, then please click on the link to apply. If you are interested in hearing about any other opportunities in Structural Engineering, Civil Engineering, Highways Engineering, Drainage Engineering, Flood Risk Engineering, Geotechnical Engineering, or Transport Planning, then please do not hesitate in getting in touch with Martin on (phone number removed) for further information

Our OfferCapgemini Engineering is recruiting an Aerospace Metallic Materials Engineer to join the existing Materials and Process Team. Key responsibilities include:• Developing, evaluate and provide materials design and process guidance from first principals, covering predominantly:o Aluminiumo St

ABOUT THE JOB A great opportunity exists for an enthusiastic individual to work as part of the Materials Team (Goods In, Despatch, Lineside) DUTIES AND RESPONSIBILITIESINCLUDE THE FOLLOWING: Operate various company vehicles, equipment and tools according to instructions and complete training as requ

Responsibilities:To provide technical and expert advice across Defence Aerospace programmes with a particular focus on design and supply chain production supportSupport design of test programmes and analysis of test programme dataInvestigate engineering development, production manufacturing and in-s

Primary ResponsibilitiesEnsure materials are called off in time to meet the events programmeLiaise with Suppliers to confirm delivery arrangementsFollow up any outstanding ordersMonitors build progress with site teams to ensure materials due in are still required to dates requested. Monitor producti

Key responsibilities include:· Developing and providing materials design guidance from first principals, covering predominantly:o Composite materials /Reinforced Plastic· In addition to:o Adhesive bondingo Mechanical fasteningo Aerospace primary and secondary structure applications· Support mater

Key Responsibilities Developing, structuring and maintaining accurate Engineering Bills of Materials in line with design outputs. Skills: BOM bill of materials engineering manufacturing.

Our name is renowned for providing excellent quality and service in the supply of building materials and timber-based products. Drive performance through effective use of company systems and data insights Build lasting customer relationships and support sales growth strategies Oversee operational st

We are looking for a Materials Project Engineer for our Automotive customer based in Surrey, UK.

Our name is renowned for providing excellent quality and service in the supply of building materials and timber-based products. A passion for delivering customer service excellence Competent in the use of IT, including but not limited to Microsoft packages Strong communication and interpersonal skil

The environment is complex, NPD is constant, and materials decisions have a direct impact on service, waste, and working capital. Candidates without hands-on FMCG manufacturing materials experience will not be considered.

Grafton Recruitment are working with a large global manufacturing organsation to appoint an experience supply chain professional to manage high volume materials across an international supply base. Experience in a supply chain planning or materials management role.

Raw Materials Technologist (Maternity Cover) Location: Windmill Lane, Grantham or Craigavon Contract: Fixed Term ContractWe're looking for a detail-focused Raw Materials Technologist to support supplier compliance, ingredient safety, and specification accuracy across our business.

Company description:Fantastic challenges.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.Were proud to play a par

Footwear Materials & Product Developer | North West | UK Based | Lifestyle & Performance Business Why This Role Matters:You'll play a pivotal role in shaping an iconic, high-visibility footwear launch-one that redefines innovation, pushes performance boundaries, and sets a new standard for the indus

Company description:Fantastic challenges.GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries.Were proud to play a par

Materials ControllerLocation - CorwenSalary - £30-£40,000 Join a world-class manufacturing operation who have recently invested in state-of-the-art production tech. We're recruiting a motivated, detail-oriented Materials Controller (or Stock / Inventory Coordinator) to take full ownership of.

Your new role Working on the largest highways project in the region involving a new 10 mile dual carriageway, we are looking for a Materials Engineer to join the project team.

Manage the shipping / receiving of materials. You will maintain materials systems updating as necessary. What you'll need to succeed As Materials Clerk, you will be self-motivated, detail-oriented and able to work on your own initiative.

Our name is renowned for providing excellent quality and service in the supply of building materials and timber-based products.

Job Description Brightwork's client is currently recruiting an Engineering Materials Buyer/Administrator who will demonstrate a strong ability in the sourcing and supply across a wide range of engineering materials.

Our name is renowned for providing excellent quality and service in the supply of building materials and timber-based products.

The Role Reporting to the Supply Chain Manager, you will play a key role in ensuring the timely supply of raw materials and packaging to support production requirements. Key Responsibilities Liaise with external suppliers and internal sites to ensure materials and packaging are delivered on time to

Were seeking a Materials & Joining Specialist to define the material and joining strategies for a new generation of industrialised construction products.

Internal Sales Executive Building MaterialsJob Title: Internal Sales Executive Building Materials Job reference Number: 756166-5082-2647 Industry Sector: Building Materials, Heavyside Building Products, Civils, Drainage, Hard Landscaping, Insulation, Timber, Joinery, Roofing, Paving, Commercial Pa

Work with logistics to transport materials between locations within the factory. Materials Controller - CoalvilleJob Type: Full timeIn a Nutshell…We have an exciting opportunity for a Material Controller to join our team within Vistry Works East Midlands, at our factory in Coalville Leicestershire

Job Description LOCATION: UK Home Office Based SALARY: £50,000 - £60,000 plus company car and generous bonus scheme Established and growing chemical distributor Selling to manufacturers of composites, thermoset and masterbatch Able to regularly visit the Head Office and commercial team in Southern

A global engineering employer is seeking a Warehouse Manager who will oversee daily operations including inventory and logistics management.The ideal candidate will have a strong understanding of inventory management in an Engineering or Manufacturing environment and experience leading a logistics t

A leading manufacturing company in the UK seeks a Direct Category Manager to oversee raw materials and packaging procurement.

It comprises the Schools of Aviation, Biological Earth & Environmental Science (BEES), Biotechnology & Biomolecular Sciences (BABS), Chemistry, Materials Science & Engineering (MSE), Mathematics & Statistics, Physics and Psychology. The School of Materials Science & Engineering comprises approximate

A leading materials company in the United Kingdom is seeking an Administrative Support professional to provide operational assistance to the Administration Team.

Proven experience in graphics, colour, and materials design, preferably for apparel or swimwear/activewear. You’ll be shaping the look, feel, and materials of apparel collections from concept to execution. Create are seeking a skilled freelance Graphic, Colour & Materials Designer to support the d

A leading testing and certification company in the UK is seeking a Product Assessor to join its Technical team.The role involves planning fire resistance test programmes, preparing technical reports, and ensuring compliance with safety standards.Ideal candidates will have an engineering background o

This role focuses on promoting their company’s e-commerce packaging materials and automated packaging equipment in designated international markets and supporting the company’s global business growth. Proven experience in international sales, preferably in packaging materials, logistics, manufac

We actively pursue this purpose through the development and production of advanced materials.