Project based jobs in Minneapolis, Minnesota - Page 5Crear alertas

Job Description Position Summary Provide direct support to enable the Maintenance Department to independently carry out daily responsibilities and integrate all phases of electronic/automated equipment installation, updates, and repairs. Key Responsibilities • Responsible for the maintenance and troubleshooting of electrical and control systems equipment down to the component level, including 480V electrical power distribution, instrumentation, motor controls, relay logic, VFD's, Servo's, I/O devices/modules, PLC's, HMI's, and communication networks., • Make program modifications in PLC's logic, HMI's programs, Drive (Inverter), and servo controller logic to improve equipment performance., • Manage all PLC, Drive and HMI programs and changes as well as electrical documentation Ensure that they are all accurate, updated, and available to the technicians and archived at regular intervals., • Must have experience with the National Electrical Code., • Develops and implements new electrical preventative maintenance tasks and procedures., • Train and assist technicians to troubleshoot, repair, replace and commission all electrical control devices including AC drives, DC drives, Servo Controllers, contactors, motors, breakers, solenoids power supplies and indicator lights. All PLC/HMI hardware including processors, discrete and analog I/O cards, power supplies, network adapters, I/O hardware, communications systems, operator interfaces such as Panel view, PC based interfaces, and message displays., • Work with engineering on specific electrical and or controls projects from design to startup, including HMI and PLC programming, installation, checkout, start-up and training., • Seek out and identify obsolete, unsupported, or otherwise deficient systems. Research and identify solutions then report, prepare scope of work and cost estimates to resolve., • Must be proficient in electrical and mechanical schematic reading. Development of electrical schematics desired., • Will function as a maintenance technician as needed, responsible for PM duties, project work and scheduled or breakdown maintenance, when situation dictates., • Direct Reports: No, • Physical Requirements: Lift up to 50 lbs, pushing, pulling, bending, continuous walking., • Uniform: Yes, • Reports to: Nate Petersen, • Education:, • High School Diploma or GED, preferred associate degree in electrical/electronic fields., • Experience:, • 5 years' experience within an industrial setting where your focus was heavily with electrical and PLCs., • Demonstrated knowledge and use of WO system, PO system, Notes, Excel, and Word, • ERP Experience required. -Proficient use of applicable electronic measuring and diagnostic tools; multimeter, circuit locator, thermal imaging equipment -Proficient understanding of applicable software, program language and printed logic -Understanding of current applications and systems, mechanical and electrical -Strong electronic and PLC skills, proficient knowledge of AB applications • Exceptional problem solving and analytical skills (if applicable), • Other:, • Legal authorization to work in the US is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. It is the policy of Mactac that all employees are employed at the will of Mactac for an indefinite period and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, employees may terminate their employment at any time and for any reason. Equal Opportunity Employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identify, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, citizenship status, marital status or any other consideration prohibited by law or contract. Job Posted by ApplicantPro

Job DescriptionSalary: $28-$32 per hour Come work for Building Maintenance Management as a Building Maintenance Technician III and take your career to the next level. Benefits: • Health, Dental, Vision insurance and much more available!, • PTO & Sick time, paid holidays, and floating holidays., • 401(k) with 3% company match., • Company paid cell phone and uniforms. Work Schedule: • 40 hours per week., • Monday through Friday., • On call rotation is 1 week every 5-6 weeks, when needed., • Hours between 7:00AM-5:30PM. Usually 8:00AM-4:30PM. Work Location:Great properties located throughout the Twin Cities. Office Location:Golden Valley, MN Interview Process:Virtual Interview via Microsoft Teams, and In-person Meet + Greet with the Hiring Manager. What you will be doing: • Troubleshooting and repairing electrical systems., • Maintaining plumbing systems., • Inspecting and servicing HVAC systems., • Painting, drywall repair, and carpentry., • Other job duties as assigned. Your Experience: • Strong Customer Service focus., • At least 5 years Building Maintenance experience., • CPO certification, preferred., • Special Boiler's license, preferred., • A commitment to quality in your work., • Ability to troubleshoot problems effectively. Pay Range: $28-$32 per hour. About Us:BMM is a family owned, locally owned small business that has been providing maintenance and remodeling services to commercial properties in the Twin Cities since 1987. We provide a wide spectrum of services including preventive and general building maintenance, renovation, groundskeeping, remodeling, project management, and more. Current or former military are encouraged to apply. To see all of our current openings, please go to our careers page: Our recruitment, hiring and promotion decisions are not based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, disability, age, or genetic information (including family medical history).

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Minneapolis, MN Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National). Applicants can live anywhere within the Continental U.S Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description At Minnesota Cannabis Services, we're not just building businesses — we're building the people who make them great. Our team partners with leading operators across cultivation, manufacturing, distribution, and retail to deliver world-class expertise in legal, finance, analytics, marketing, HR, and technology. We're looking for professionals who take pride in their work, move with purpose, and thrive in fast-changing environments. The kind of people who hold themselves to high standards, think creatively, and find satisfaction in solving hard problems. When you join our team, you'll work alongside some of the most experienced leaders in the industry — professionals who share their knowledge freely and lead by example. You'll be challenged, supported, and trusted to take ownership of meaningful work that shapes the future of one of the fastest-growing industries in America. MN Cannabis Services is a trusted leader in the cannabis industry, operating multiple state-licensed dispensaries and a modern production facility. As we grow and expand the business to the Minnesota Market, we are building exceptional retail teams who are passionate about cannabis education, community wellness, and customer service. If you enjoy working with and talking about cannabis, this is the right job for you! Retail Associates enjoy a fun and collaborative environment with great tips, the largest discount on cannabis in the industry, and a generous incentive program! Join our team today and start looking forward to coming to work doing something you love! As a Retail Associate (Budtender), you are the face of the brand. You'll guide customers through product selection, offer cannabis education, and ensure an exceptional in-store experience. This is a customer-facing role perfect for someone passionate about cannabis, wellness, and retail service in a highly regulated environment. Key Responsibilities: Customer Service & Sales • Greet every customer warmly and professionally; build rapport and promote return visits, • Provide expert guidance on product selection based on individual needs, preferences, and regulations, • Educate customers on strain types, cannabinoid profiles, consumption methods, dosage, and product effects, • Offer recommendations based on customer health goals, product availability, and state regulations, • Promote loyalty programs, daily deals, and new product launches, • Accurately process transactions through POS and seed-to-sale tracking systems, • Handle financial transactions with integrity and accuracy, • Adhere strictly to all state cannabis laws and internal SOPs (including ID verification, purchase limits, packaging, and labeling), • Maintain confidentiality and HIPAA compliance when handling patient/customer information, • Assist with restocking, product rotation, and backstock organization, • Maintain merchandising standards by keeping displays neat, full, and visually appealing, • Verify accurate labeling and pricing on all retail products, • Ensure the sales floor, waiting area, restrooms, and break room remain clean and organized, • Sanitize high-touch areas and workstations regularly, • Must be at least 21 years of age, • High school diploma or equivalent required, • 1+ year of customer service, hospitality, or retail experience; cannabis experience not required, • Strong interpersonal and active listening skills, • Basic math and computer skills; POS and inventory software experience a plus, • Ability to work flexible hours including weekends, evenings, and holidays, • This position requires the ability to perform essential job functions such as standing, walking, bending, climbing, and lifting up to 50 pounds regularly (up to 200 pounds with assistance), with or without reasonable accommodation, • Pay starts at $16.28/hr. – plus additional earnings from tips, • Top-performing Retail Associates have the potential to earn $80 or more in tips per shift, • Employee discount includes 50% off smokable cannabis products and exclusive discounts from top national retailers, • Generous bonus structure, • Health Benefits available, including both high-deductible and low-deductible plan options, • Employee Assistance Program (EAP), • Paid Sick Leave (PSL), • Holiday Pay for anyone working New Years Day, 4/20, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and Christmas Day At Minnesota Cannabis Services, we believe great teams are built on trust, initiative, and follow-through. We invest deeply in our people — providing mentorship, on-the-job training, and opportunities for advancement across multiple sectors of the cannabis industry. Here, you'll be part of a high-performing culture that values precision, reliability, and continuous improvement. Every project is a chance to grow your skills, strengthen your leadership, and contribute to something that matters. If you're driven, resourceful, and ready to make an impact, we want you on our team. Apply today and take the next step in your career with Minnesota Cannabis Services.

Job Description The Quality Inspector / Document Control Technician will work in a fast-paced environment using a variety of inspection techniques and equipment to confirm supplied and internal materials meet specifications. This position requires understanding and indicating inspection status, maintaining product traceability and non-conforming material control. The primary responsibilities for the position are supporting inspection with receiving, first articles, labeling, final inspection of material and medical devices.. The position also includes assisting in document control with a variety of activities. Simple statistical analysis may also be required. The ideal candidate will have excellent communication skills, be detail-orientated, and have flexibility to change needs based on project requirements Key Responsibilities: • Utilize experience and skills to use inspection tools including vision system, thickness gages, drop indicators, micrometers, calipers, laser micrometers, pin gages, and other testing equipment as needed, • Keep accurate records of inspections using pre-determined processes, • Identify non-conformities and communicate to necessary departments, along with participation in disposition of non-conformances, • Recommend updates to quality inspection documentation or specifications as needed, • Understand Grand Avenue Software System and assist with Document Control, • Create, review, and approve Documentation Change Requests, • Work with cross-functional teams to perform duties as needed, • Perform first-in-first out inspections and prioritize inspection based on various project needs, • Priorities Documentation Change Requests based on various project needs, • Ensure training is complete prior to performing inspections and assist with training other individuals as needed, • Perform line clearance to ensure all materials from the previous lot have been removed, • Work from instruction in a variety of documentation including manufacturing procedures, specifications, drawings, and inspection instructions, • Scan DHR documentation and file both hard copy and scanned versions to appropriate folders/files, • Work with minimal supervision, • Lift up to 20 pounds Qualifications: • High school diploma or equivalent, • 2+ years prior experience in medical device is required, • Proficiency with Microsoft Word and Excel, • Ability to read, write, count, and understand English, • Ability to perform tasks using various business software systems supporting inventory and document control

Job Description This role will be responsible for supporting operations at the corporate level by providing automated inspection programs. The CMM Programmer will create and support existing programming scripts to ensure the parameters for the project are followed. This position is responsible for creating the inspection road map prior to manufacturing to enable efficient flow through the Inspection room. This position will work cross-functionally with engineering, programing, and operations. ESSENTIAL FUNCTIONS AND BASIC DUTIES: · Create CMM programs for all parts and features that can be inspected including mini programs and critical dimensions. · Technology partner and champion for CMM, Laser, White Light, Blue Light, and CT Scanning, as well as other inspection methods; elevating our capabilities and best practices with best available technology. · Partner with CNC Programing and Engineers to identify the right critical key features to inspect, understanding tool paths, and tools used to machine what fixtures. · Create optimized fixturing utilizing additive manufacturing (3D printing). · Evaluate automation, quick change fixturing, and multiple parts per fixture setups. · Create programs for complementary equipment. · Provide recommendations on capital inspection equipment including justifications. · Modify and alter legacy inspection programs. · Troubleshoot dimensional discrepancies on CMM reports. · Optimize CMM efficiencies including cycle, strategy and part holding techniques. · Understand time required for inspection processes, applying principles to sample size, lot size runs, estimates of programming times, working to ensure quality conformance and operational velocity. · Help build out inspection routing steps to incorporate into operations scheduling & planning process. · Submit customer required preapprovals. · All other duties as assigned. QUALIFICATIONS EDUCATION/CERTIFICATION: Bachelor’s degree in Engineering or equivalent years of related experience required. REQUIRED KNOWLEDGE: General knowledge of machining and basic inspection fundamentals, fixture design, and machine center capabilities. Windows based computer knowledge. Must have excellent blueprint and GD&T interpretation skills. EXPERIENCE REQUIRED: 5+ years of automated measuring equipment experiences with preference on CMM and Vision Systems. Zeiss Calypso software experience a plus. Hard gauging experience preferred. Experience with SPC automated collection software WinSPC, Datapage+ or QDAS a plus. CQT or CQI certification a plus and CQE preferred. SKILLS ABILITIES: Ability to learn JobBoss manufacturing software. OTHER REQUIREMENTS: PHYSICAL STRENGTH: Lift up to 40 pounds. LANGUAGE ABILITY: Ability to understand and follow instructions in English. Job Type: Full-time

Job Description About Us {{firstname}} believes in #NoColdAsks. Through our combination of video, sophisticated paid and organic outreach, and journey-based constituent engagement, the {{firstname}} team works with nonprofit organizations to better engage supporters and increase fundraising, activism, higher education admission and enrollment, and overall participation in the mission. {{firstname}} is about innovation and applying creative concepts to solving the challenges facing our client partners. We are in search of entrepreneurial individuals who value having their ideas applied to new processes that better our world through the missions of our client partners. For more information please visit firstname.co. Job Summary and Responsibilities {{firstname}} is seeking an innovative content editor/manager with a passion for content creation and for helping nonprofits. The Program Associate, Video role requires a robust understanding of all phases of short-form video production, including light motion graphics work, and a heavy emphasis on editing. The {{firstname}} Program Associate, Video will report to a Senior Program Manager while working directly with all Program Managers and Program Associates to deliver, manage, and enhance our clients’ authentic fundraising video content. Much of this content is created by students, and the VA will work closely with those students to ensure quality, punctuality, and to communicate revision notes to the students. Occasional training to elevate the skills of those students will periodically be delivered, and the Program Associate, Video will be a key player in those trainings. We are firstly looking for someone who can edit raw footage to exact script specs on tight deadlines, and secondly a candidate who is passionate about distilling and communicating edit notes to our student content creators. We are also looking for a candidate who can “see the pieces” clearly enough to anticipate and contribute other narrative options for existing content, and envision places where dynamic b-roll and graphics can be added. Being able to generate intermediate-level graphics content like animated pop-ups and lower thirds would elevate a candidate for this role. Having some experience or awareness of the various roles in traditional film production would also serve this candidate well. Qualifications • Content creation and video editing experience in Adobe creative suites or similar platforms, • Keen attention to detail and experience in editing video to scripted specifications, • Demonstrated history of capturing interviews, b-roll and other media to weave a narrative, • Demonstrated ability to create basic motion graphics like animated lower thirds, • Ability to manage and organize video media and content libraries, • Ability to assist multiple client engagements simultaneously, • Experience developing and executing video marketing plans and strategies, • A positive professional demeanor and dedication to serving {{firstname}}’s client partners, • Auditing content across all clients to ensure uniformity of organization, as well as tracking client project use and popularity across clients, • Executing final editing touches on any content that the student teams have been unable to complete before deadline, • Managing and coaching students on the production of video content and providing useful feedback and direction to the student teams, • Meeting with {{firstname}} team members to deliver status updates on students, and get up to speed on developing strategies for current and future client partners, • Drafting early outlines for additional student trainings and working under Program Manager direction to refine those outlines into robust training modules, • Approximately $45,000/year to $55,000/year, commensurate with experience, • Benefits package available including health and dental insurance, 401K match, and paid time off Please submit a cover letter; current resume; three references; and a video cover letter explaining your interest in and qualifications for the position. Please note, video URLs should be included in the cover letter via a link using YouTube, Vimeo, or a similar application. Applications will be accepted through June 30, 2023. Note: Incomplete applications will not be considered. Video cover letters are required for a complete application.

Job Description Starting pay: 85,000.00- 90,000.00 Let’s talk about Canteen One! We are the national account management arm for Canteen, the largest and most experienced food and retail service company in the United States. We help our clients take the best breaks possible by providing unique and customized office coffee, vending, market, and pantry programs from coast-to-coast. Let’s talk about Perks! At our North Loop Minneapolis office, we have an awesome office environment filled with perks! Free office coffee and pantry – One block from light rail transit– Dress for your Day – Canteen Avenue C (market) & Foodsby food delivery – Sporting event tickets frequently raffled off – Paid time off to volunteer for corporate sponsored events – Wellness programs … you get the idea! Let’s talk about Opportunity! As part of Compass Group USA, the 6th largest employer in the world and leader in food service and support services, Canteen One provides you with an opportunity to work with Fortune 500 companies, and become part of a diverse team committed to attracting, retaining, and developing top level talent. If you are passionate about a customer-first, always friendly approach, we think you’ll fit right in! Canteen One offers a variety of career opportunities, including: • Customer Service, • Accounts Receivable / Consolidation Services, • Finance / Accounting, • Client & Account Management, • Vendor Relations / Operations, • Define project scope, goals, and deliverables aligned with business objectives, • Lead cross-functional collaboration with internal teams and stakeholders, • Track milestones, manage risks, and maintain clear project documentation, • Ensure timely and accurate delivery of initiatives using structured methodologies, • Serve as primary liaison between client and Compass teams, • Build and maintain strong business relationships, • Resolve issues proactively and escalate when necessary, • Analyze processes and recommend improvements, • Identify opportunities for efficiency and innovation, • Support contract growth, retention, and execution of obligations, • Analyze vendor, client, and internal financial performance, • Present insights and recommendations to clients and internal teams, • Lead financial modeling and proforma development, • May supervise Account Coordinators or Client Service Managers, • Lead strategic initiatives and contribute to key account planning, • Ensure deliverables are met on time and aligned with KPIs, • 5+ years of operations experience, • 5 years managing complex enterprise projects with change management components, • High school diploma or GED, • Experience with POS reporting requirements, • Strong analytical, problem-solving, and decision-making skills, • Advanced proficiency in Microsoft Office (including Planner), • Excellent communication, presentation, and relationship-building skills, • Associate’s or Bachelor’s degree, • PMP or Lean Sigma certification, • Supervisor experience, • Experience with ERP systems (Oracle, SAP, JD Edwards), • Familiarity with reporting tools (Business Objects, Crystal Reports) Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Associates at Canteen One are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Req ID: 1478697 Canteen One ISAAC Warren SMITH

Job Description Business Unit: XeteX, Coon Rapids, MN About XeteX: At XeteX, our mission, vision, and values drive our company purpose: “Helping Buildings Breathe Better.” By designing and manufacturing high-performing energy recovery ventilation and air handling solutions for industrial and commercial buildings, XeteX produces a better world for all of us. XeteX was founded in 1984. In recent years, our Company has experienced unprecedented growth and has been recognized as an eight-time Inc. 5000 Honoree ranking as one of the fastest-growing private companies in America. Our headquarters are located in Coon Rapids, MN and our production facilities are based in Holmen, WI. Xetex is teaming with innovation, expertise, and outstanding people. That is why we value our people as our greatest asset! Our employees lead through integrity, apply creativity and talent, invent innovative solutions to meet new demands, and offer effective services/products to be leaders in the industry. By adding your creativity, innovations, and contributions, you take pride in being a valued member of our growth and success. Sales Design Engineer: The Sales Design Engineer supports the sale and execution of XeteX custom air handling equipment by providing engineering design, quoting, and project management support. This role partners closely with Independent Sales Representatives to develop accurate equipment designs and cost estimates during the sales process and serves as the project manager once orders are awarded. From initial design through manufacturing support, shipment, and successful startup, the Sales Design Engineer ensures projects are delivered on time and meet customer requirements. This position also serves as a technical specialist for assigned components and technologies, collaborating with internal teams and vendors to support continuous improvement and innovation. Job Duties: • Provide quotes on equipment designs to support the sales efforts of XeteX’s Independent Sales Representatives. As part of the quoting process, review plans and specs to create a detailed cost estimate and performance approximation., • Once a job is won, serve as project manager for the job starting with providing a detailed design submittal, supporting manufacturing with detailed drawings and BOMs, and ensuring an on-time shipment of the equipment. Project completion will happen once the equipment has been successfully started up at the customer’s site., • Work collaboratively with fellow engineers to review submittal documents and implement changes to standard processes., • Serve as the company specialist on assigned components and technologies. Work with vendors to stay on top of new technologies and their related design requirements for XeteX equipment., • Provide support as required on assigned design engineering tools., • Review new vendor product offerings and support as needed their implementations into XeteX designs., • Participate as needed with Customer visit and presentations. Qualifications: • BS in Mechanical Engineering required. MS preferred., • SolidWorks or other CAD software proficiency required;, • Detail-oriented, ability to plan, organize, set priorities and manage multiple projects., • High level of analytical ability required, • Strong written and verbal communication skills required., • Ability to exercise independent judgment and work independently with minimal supervision., • Working knowledge of Microsoft Office products required., • Ability to travel independently. Travel is infrequent and less than 10% Our Purpose: Through our purpose of “Helping Buildings Breathe Better,” XeteX unlocks the full potential of building environments through our innovative custom air handling solutions. We are dedicated to designing and manufacturing high-performance, sustainable systems that optimize building air quality, increase energy efficiency, elevate occupant comfort, and enhance operations. Our Vision: Our vision is to be the premier HVAC air handling company, setting the standard for excellence in the industry. XeteX strives to provide exceptional solutions that create commercial and industrial building environments exceeding customer expectations in comfort and performance. Through continuous innovation, advanced technology, and a commitment to sustainability, our products contribute to a greener planet. Our Mission: With a relentless focus on innovation and quality, XeteX exists to breathe life into commercial and industrial facilities to reach their highest capabilities. XeteX is directed by a simple idea: “Always do the right thing,” that represents our five Core Values: • Integrity - Being honest, transparent, and ethical., • Customer Focus - Prioritizing Customer needs in all we do., • Excellence - Surpassing expectations in every aspect of our work., • Collaboration - Embracing our collective strength which is the sum of our individual efforts., • Autonomy - Empowering our people to make a difference. Altenate Titles: • Applications Engineer, • Mechanical Sales Engineer, • Design Engineer – Sales Support, • Equipment Design Engineer, • Project Engineer – Equipment Design, • Mechanical Applications Engineer, • Product Design Engineer, • Quoting Engineer, • Technical Sales Engineer, • Manufacturing Design Engineer, • Capital Equipment Engineer Keywords for SEO: sales design engineer, applications engineer, mechanical sales engineer, equipment design engineer, project engineer mechanical, quoting engineer, technical sales engineer, capital equipment design, mechanical engineering BS required, SolidWorks design engineer, CAD design engineer, cost estimating engineer, performance modeling engineer, review plans and specifications, equipment design submittals, BOM creation, manufacturing support drawings, project management engineering, on-time equipment delivery, equipment startup support, vendor collaboration engineering, new technology integration, component specialist engineer, product evaluation engineering, customer presentations engineering, independent judgment engineer, minimal supervision engineering role, travel less than 10 percent Equal Opportunity Employer: XeteX is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Job Title: Senior Systems Engineer Type: Contract - 12 Months Location: Minneapolis, MN Pay: Can Be Flexible!! We are seeking a Sr Systems Engineer for a very important client. Responsibilities may include the following and other duties may be assigned. Collect and analyze design inputs (customer needs, business needs, etc.) and transform them into high quality engineering requirements. Perform system architecture and design for all phases of system development to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensure the logical and systematic conversion of system requirements and design into product requirements that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. Lead, coordinate, execute, and document system analysis and design activities including but not limited to architecture definition, interface management, performance modeling, system integration, and design failure modes and effects analyses. Identify technical development risks, develop and execute risk burn-down plans Facilitate cross-functional engineering and project team communication to drive design decisions, align on test and integration strategies, review test results, identify technical issues and manage their resolution Verify system requirements have been properly implemented (writing, leveling, tracing) through inspection, demonstration, test or analysis. Validate that implemented systems meet customer needs Support regulatory body submissions and facilitate knowledge transfer to continuation engineering teams Represent the organization as a primary contact for specific projects and initiatives; communicates with internal and external customers and vendors at various levels. May negotiate with others to reach understanding or agreement, and influence decision-making. Manage moderately complex projects, involving delegation of work and review of work products, at times acting as a team leader. Provide guidance, coaching, and training to other employees within job area. Establish and advocate for best practices and continuous improvement as to mature the Systems Engineering knowledge and processes. Understand and advocate for technology evolution and participate in the development of system and product roadmaps. Nice to Have Experience developing system definition, system design and requirements, requirement tracing to subsystems and interface requirements, and system verification and validation strategy and testing. Previous medical device experience with a history of developing products from technology to market release Experience with designing for the Hardware/Firmware/communication interfaces of electronic devices Experience in troubleshooting firmware/software interfaces Experience developing sensor-based systems, including closed-loop feedback control systems. Experience developing data analytics algorithms, and machine learning algorithms. Product Risk Assessment and Risk Management Experience (Fault Tree Analysis, Failure Modes and Effects Analysis, etc.) Experience working with and designing systems to meet ISO and Quality System Regulation requirements, including IEC-60601-1, -2, -6, IEC-62304, ISO-14971, FDA 21CFR820.30 for Class I, II and III medical systems Demonstrated strong verbal/written communication Demonstrated ability to make decisions quickly and guide a team through complex problems Experience working in cross-functional and team environments Experience working in FDA regulated and/or medical device environment Experience interfacing with physician customers and therapy consultants. Required Knowledge and Experience: Requires advanced knowledge of job area combining breadth and depth, typically obtained through advanced education combined with experience. May have practical knowledge of project management. Requires a University Degree and minimum of 6 years of relevant experience, or advanced degree with a minimum of 3 years relevant experience. Benefits include: -MEC/ACP Medical -Voluntary Dental, Vision, Life, Supplemental Income -401k (must meet requirements) -sick leave as required by state/county

Job DescriptionSummary: Develops, directs, and executes plans for major segments of complex projects. Compiles and analyzes operational, test and research data to establish technical specification and performance standards for newly designed or modified products/processes. Reviews progress of projects against design criteria and standards; recommends appropriate revisions. Develops and contributes to the development of proprietary positions for Switchback. Takes a leadership role in the application and advancement of technologies developed. Essential Duties and Responsibilities (but are not limited to): Leadership • Work closely with customers and others to define product specifications and product realization., • Perform engineering and technical work involved in planning, organizing and coordinating detailed information required to develop new products from concept to final product realization., • Perform detailed product design through adherence to established design control processes., • Develop and manage strategy to bring products through the engineering cycle., • Budget operational activities to ensure continuous funding based on appropriate priorities., • Coordinate intellectual property strategy. Development • Design prototypes and feasibility models for proof of concept testing., • Assume responsibility for overall device design and support the manufacture of new and existing products., • Devise new approaches to complex problems through revisions of standard technical principles., • Help prepare project plans, specifications, and schedules for new product development., • 10+ years experience in engineering, • Bachelor's Degree or equivalent, • Must have hands-on experience and knowledge of QSR CFR 820, ISO 13485, ISO 14971 and other relevant standards This job description is intended to describe the general nature and level of work being performed by employees assigned to this position. It is not intended to be an entire list of all activities, tasks and skills required of employees in this position.

Job Description *Factors that may be used to determine your actual salary include your job specific skills, education, training, job location, number of years of experience related to this role and comparison to other employees already in this role. DSG is seeking an HVAC Supplier Program Manager to join our team. As a Supplier Program Manager, you will be responsible for developing and managing strategic partnerships with key manufacturers, ensuring the continued profitability of supplier programs, and facilitating product alignment with the field. This position will act as the primary liaison between our suppliers, corporate functions, and field teams, ensuring smooth supplier program communication and collaboration across all levels of the organization. This position will utilize a deep understanding of supplier relationships to drive improvements in profitability while aligning product strategies with business goals. At DSG, we are dedicated to building futures one job at a time. Starting with yours. As an ESOP, we are a community of peers, first and foremost. And we focus on cultivating an environment of respect, teamwork and growth. Where your career path is rich with possibilities. Where every success is shared. And where every challenge is overcome together. For more than a century, we’ve delivered more than supplies, we’ve offered true partnership and valuable solutions. By continuing to empower the future of our vendors and customers, we will empower a future of ongoing success for all of us. A Typical Day in the Life of an HVAC Supplier Program Manager: • Supplier Relationship Management: Serve as a key contributor in maintaining and enhancing corporate supplier relationships, while enabling strong supplier and representative connections with the field., • Program Negotiation & Management: Negotiate and manage annual supplier programs, including pricing, payment terms, rebates, and co-op funds, ensuring optimal financial outcomes for the company., • Rebate & Incentive Maximization: Partner with finance and procurement teams to grow supplier rebates and incentives, taking ownership of rebate maximization strategies., • Strategic Product Alignment: Collaborate closely with the VP Segment Strategy and/or VP Sales & Marketing and National Segments, to organize, negotiate, implement, and track strategic product alignment across the organization., • Supplier Communication & Field Liaison: Act as the corporate liaison between suppliers and field teams. Regularly inform suppliers of relevant company news, product launches, sales initiatives, and strategic updates. Similarly, keep the field informed of pertinent supplier news and opportunities., • Intermediary Role: Serve as the intermediary between suppliers, corporate support teams and the field, resolving issues and ensuring smooth communication when necessary., • Field Feedback Loop: Maintain an open feedback loop with field teams to stay informed about supplier needs, opportunities, and performance feedback., • Field Supplier Negotiation Support: Assist field teams with supplier negotiations when required, ensuring favorable terms and outcomes., • Industry Engagement: Actively participate in trade associations and attend industry conferences to stay informed of market trends and expand professional networks., • Problem Resolution: Collaborate with field teams and purchasing departments to resolve supplier-related issues and ensure smooth operations., • Supplier Profitability Grading: Develop and maintain a Supplier Profitability Grading Scale to aid key associates in making informed decisions regarding supplier partnerships and product offerings., • All other duties as assigned. A Successful HVAC Supplier Program Manager Typically Has: • Experience: Minimum 5+ years of experience in supplier management, program management, or procurement, preferably in a similar industry., • Education: Bachelor’s degree in Business, Supply Chain Management, or a related field is preferred. Relevant certifications (e.g., CPIM, C.P.M.) a plus., • Negotiation Skills: Proven track record of successfully negotiating pricing, terms, rebates, and co-op funds with suppliers., • Communication Skills: Exceptional communication and interpersonal skills, with the ability to work cross-functionally and manage relationships at all levels of the organization., • Analytical Mindset: Strong analytical and problem-solving skills, with the ability to manage complex supplier data and maximize profitability., • Industry Knowledge: Familiarity with industry trends, supplier management best practices, and key challenges within the relevant market segment., • Ability to travel up to 50%., • Valid driver’s license and acceptable driving record., • Experience working with manufacturers and suppliers, preferred., • Familiarity with supplier management software or tools, preferred., • Active participation in industry groups or trade associations is a plus., • Effective project management abilities, • Relationship-building and stakeholder management, • High attention to detail and ability to handle multiple tasks simultaneously, • Ability to work independently and in a collaborative environment, • Strategic thinking and business acumen, • Proficiency in Microsoft Office Suite (Excel, PowerPoint, Word) At DSG, We Offer Benefits Built for You: • We are proudly 100% employee owned, which means your hard work and decisions directly benefit not only the success of the organization, but also your individual Employee Stock Ownership Plan (ESOP)., • We are highly committed to your training and development, offering personal and professional development opportunities and unlimited growth potential., • We offer competitive compensation packages based on your experience and potential., • You will receive generous Paid Time Off (PTO) and Extended Medical Leave (EML) allowances., • Our comprehensive benefits package, including medical, dental, and vision, also offers a multitude of other perks such as life insurance, short- and long-term disability, and a Health Savings Account (HSA) with employer contribution, among many others., • We know the importance of family, and offer various family planning and childcare savings opportunities, including paid parental leave, adoption assistance, infertility assistance, and a Dependent Care Flexible Spending Account (FSA)., • Build your financial future through multiple retirement savings opportunities, including a 401(k) with employer match and ESOP., • You will receive a discount on all DSG-supplied products., • We believe in giving back to our communities and hope that you will too, which is why we offer paid volunteer hours in addition to PTO.

Job Description Senior Business Systems Analyst South Country Health Alliance | Hybrid/Remote (On-site 1x/quarter) South Country Health Alliance is seeking a Senior Business Systems Analyst to join our Information Technology team. In this role, you will manage complex systems development and enhancement projects, translate business processes into technical specifications and drive improvements across our organization. You’ll work closely with internal departments and external partners, providing technical expertise and mentorship while ensuring our systems are efficient, accurate, and compliant. What You’ll Bring: • Bachelor’s degree (Technology, Business, or Analytics preferred), • 5+ years as a Business Systems Analyst or similar technical/project role, • 2+ years with Power BI and/or SQL South Country Health Alliance is more than a health plan—we’re a mission-driven organization dedicated to improving health and well-being in rural Minnesota communities. Our work is guided by values of communication, collaboration, stewardship, and excellence, ensuring that every employee contributes to making a real difference in people’s lives. [mnscha.org] We invest in our team with: • Comprehensive benefits: Medical, dental, vision, life insurance, short- and long-term disability, pension (PERA), and more., • Work-life flexibility: Hybrid and remote options with quarterly on-site expectations. POSITION DESCRIPTION Position Title: Senior Business Systems Analyst Dept: Information Technology Reports To: Director of IT & Analytics Date: April 2024 Skill Sets: Outstanding oral, written, and interpersonal communication skills; demonstrated abilities in team building and leadership; advanced technical expertise, such troubleshooting, analytics, research, and SQL coding; knowledge of the advanced principles and practices of project management and workflow analysis; exceptional conflict and problem resolution skills; strong organization and critical thinking skills; proficient in providing high-level customer service; self-starter and ability to take initiative. Education/Experience: Required: Bachelor’s degree (Technology, Business, and/or Analytics concentration preferred); Five years’ experience as a business systems analyst or in a position with advanced project management and technical expertise; Two years’ experience with Power BI and/or writing SQL queries. Preferred: Previous experience with Medicaid or Medicare health data, especially medical claims and enrollment. Primary Function Manage complex systems development and enhancement projects, utilizing skills that require an understanding of complex business processes and the ability to translate those into the required technical specifications. Conduct independent research, interpret highly technical documents, draw valid conclusions, develop technological solutions, take appropriate actions and/or make appropriate recommendations related to complex IT problems. Essential Accountabilities • Analyze South Country’s technical systems for efficiency, accuracy, and quality. Develop and manage project plans that promote improvement to these systems., • Manage project teams so that project risks can be identified, and solutions created and implemented., • Proactively insert self into the business and identifies areas for improvement in processes and systems. Work with the Business Analyst to translate these needs into technical requirements., • Utilize analytical tools such as Power BI and SQL to interpret and analyze complex medical and enrollment data sets, producing insight in a way that enables informed decision making,, • Develop and implement comprehensive test plans to ensure that systems and programs are tested and debugged., • Provide mentorship to other staff members within the organization. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Skills: Strong listening, verbal, presentation, and written communication skills; Advanced language skills including inquiry skills to assure clear issue identification; Ability to effectively articulate complex issues to a variety of audiences; Writing is clear and to the point; Chooses the appropriate method of communication to meet customer and organizational needs. Must be able to read and write in English. Mathematical Skills: Advanced mathematical skills. Intermediate to advanced data analysis skills. Accuracy: High attention to detail and considerable accuracy is required. Errors and omissions may result in significant loss, such as the inability of enrollees to access health care services and may result in contractual and regulatory non-compliance. Errors that are not easily detected may have a critical impact on the organization. Reasoning Ability: Must utilize keen judgment and highly developed analytical skills in balancing complex business issues in the decision-making and project planning process. Physical demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or listen. The employee frequently is required to sit, sometimes for extended periods of time. The employee is occasionally required to stand, walk; kneel; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee would rarely lift and/or move up to 5 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually low. Ability to work under stressful conditions with significant deadlines, however, employee has control over their own schedule. Travel Requirements: Occasional travel may be necessary. Contacts This position works very closely with all internal departments daily as well as frequent interaction with business partners, including third party organizations and software vendor contacts. This position must maintain satisfactory relationships, which may include collaboration in executing established policies, securing compliance with approved procedures, and innovating to improve current practices, and is considered a technical expert in their field. Financial Impact This position is responsible for the creation of complex technical solutions that are peer reviewed and approved by the Director of IT & Analytics. Incorrect solutions could result in regulatory fines, loss of confidence of our members and users or incorrect decisions made by South Country Health Alliance.

Job DescriptionDescription: Department: Administration Reports to: Director of Operations Compensation: $120,000 - $130,000 annually, depending on qualifications Benefits: Benefits Eligible Position Summary The Director of Information Technology is responsible for all theater-wide electronic, hardware, and software systems including all business applications, telecommunications systems, and ecommerce applications. The Director defines and implements technical strategy to support all aspects of the business, driving process improvement across the organization and directing day-to-day information systems operations effectively and efficiently. The Director analyzes the needs of different departments and determines ways to meet business objectives by modifying existing or developing new information processing systems. Additionally, this role provides overall leadership and supervision to the Information Technology team. Guided by the Guthrie’s core values of Artistic Excellence; Community; Diversity, Equity, Inclusion and Accessibility; and Fiscal Responsibility, the Director of Information Technology plays a key role in the organization as we strive to center and operationalize these values. The scheduled hours are variable, depending on the dynamic needs of the theater, which can include evenings and weekends. The Guthrie is an Equal Opportunity Employer. We are committed to building an equitable environment that finds strength in diversity of identity, experience and perspective. We are dedicated to hiring and developing talented teams which are inclusive and welcoming to individuals with different backgrounds, thoughts, and abilities. Applicants from populations underrepresented in the theater field are strongly encouraged to apply. Primary Duties and Responsibilities 1. Information Systems • Provide leadership and assume key responsibility for all organizational hardware and software., • Oversee the technology “service desk” and ticketing system to ensure that acceptable technical supports are in place., • Oversee and manage organization-wide voice systems with established vendors and explore options as needed., • Set policy for the purchase and maintenance of computers, phones and other necessary technology., • Adapt and maintain industry technology in onstage production and creative work. 2. Risk Management and Performance Analysis • Collaborate with colleagues on maintenance and disaster recovery of the ticket sales portal and customer relations systems (CRM - Tessitura)., • Coordinate with Public Safety to ensure safety of patrons and security of information by utilizing software and hardware technologies, including security cameras and phone recording systems., • Manage emergency power systems, network and connections. Serve as a resource for Facilities and contractors on computer-specific aspects of infrastructure (including, without limitation, fiber optics, conduits, and door control systems)., • Develop departmental and organizational policy and procedures, data security standards, methods of operation, and data processing schedules., • Develop and maintain system disaster recovery plans and business continuity plan, in the event of a power failure, damage to system, etc. Manage routine back-up of key data and security systems., • Build and maintain highly available systems for on stage productions., • Be on call for system emergencies. 3. Compliance and System Maintenance • Conduct and complete system backups, maintenance, server upgrades and patching., • Monitor and manage activities and processes related to Payment Card Industry (PCI) and personally identifiable information (PII) compliance. Provide and support high-end firewalling, intrusion inspection, malware protection, and other relevant system security measures to protect the integrity of patrons’ information. 4. Development and Integration Adaptation • Develop and oversee a strategic comprehensive information systems plan reflecting the organization’s mission, values, and strategic business plans., • Work with Guthrie leadership to determine the technology business requirements, define technical architecture direction, and implement changes as appropriate. Develop and present project roadmap and associated capital and operating budgets to the Director of Operations, or other interested parties such as Senior Management., • Provide advice on evaluation, return on investment, selection, implementation and maintenance of information systems, ensuring appropriate investment in strategic and operational systems. Ensure systematic process for decisions on whether to “make, buy, or outsource” technology., • Maintain a high degree of expertise in order to research, analyze, evaluate and recommend new technology developments in a cutting-edge theatrical design community. Advise other department managers on the applicability, costs, and schedule impacts for the performing arts., • Lead, champion, and support projects related to implementing such best practices., • Collaborate with Artistic and Production staff to ensure optimal use of technology in the theaters. Provide support during both office and production hours. Support routine theater electronic needs, such as ticket scanners, LED towers, information monitors, multimedia products, etc., • Trouble shoot issues, elevating and collaborating as needed with other ITS staff members to problem solve., • Act with integrity and adaptability when problem solving to develop the best solution at the highest industry standard. 5. Operations and Administration • Develop and recommend a fiscally sound department budget based on department goals and organizational needs. Monitor and manage departmental expenditures, continuously seeking opportunities to reduce or eliminate unnecessary expenditures and find cost-effective ways to do business., • Establish and oversee daily operations of all business systems and regularly evaluate and monitor systems applications for effectiveness and future viability., • Manage selection and evaluation of application and technology vendors., • Coordinate vendor support of desktop and multifunction printers., • Document, coordinate, and archive network activity., • Implement and maintain technologies for creative and onstage productions., • Support and integrate industry production stage technology within the Guthrie facility. 6. Leadership and Supervision • Serve as a member of the Operations Team and as a conduit for information between management and Guthrie staff., • Facilitate a customer service-oriented environment in which other departments are encouraged to seek and are satisfied with help and guidance on technology issues. Provide leadership to facilitate a customer focused technology team., • Lead, manage and supervise the Information Technology Generalists and Database Administrator., • Hold regular check-ins with all direct reports., • Actively participate in team building. Fostering a work environment of artistic excellence, community, diversity, equity, inclusion and accessibility, and financial responsibility., • Hire staff members to ensure quality work., • Attend and/or run department meetings to communicate pertinent information along to the employees., • Coach and develop staff members by monitoring employee productivity and providing constructive feedback; facilitating conflict resolution among employees; ensuring adherence to legal and organizational policies and procedures and undertaking disciplinary actions if the need arises; and completing annual performance evaluations., • Prior experience managing and directing an information systems environment that includes software application management and ecommerce applications., • Experience leading a team in a non-profit environment. Proven skills in building, mentoring, and inspiring a team of professionals., • Education in computer science, computer engineering, or a related field preferred., • Strong information technology generalist skills. Demonstrated advanced knowledge of all facets of information technology., • Track record of leading application architects in an enterprise setting across multiple technology platforms, including Microsoft and Linux., • Track record in leading strategic initiatives and providing outstanding business results from vision to implementation., • Thorough knowledge of trends in the industry, state of the art database engines, operating systems, servers and telecommunications hardware and software., • Strong understanding of disaster recovery and business continuity., • Success in negotiation vendor contracts and managing effective vendor relationships., • High levels of professionalism, interpersonal skills, discretion/confidentiality, good judgment and influencing skills. Excellent communicator and relationship builder., • Demonstrated customer service focus., • Can work collaboratively across multi-functional teams toward a common goal., • Can prioritize the needs of a complex organization., • Demonstrated leadership, strategic vision, analytical skills, and a commitment to success and high standards of quality., • Must be willing to work flexible hours/days reflective of the dynamic schedule of a theater, including evenings and weekends. The Guthrie relies on the talents of many artists and staff, both on and off the stage, to create powerful works of theater at the Guthrie. We are dedicated to building an equitable environment that is mixed across lines of difference. Acknowledging that there are many identities that are underrepresented in the theater overall, the Guthrie strongly encourages candidates who bring diversity of identity, experience and thought to apply. We also acknowledge that candidates can have unique and non-linear and transferable skills. We encourage you to apply even if you do not meet every single qualification but have transferrable skills and passion for our mission and vision. WHY SHOULD I APPLY? Be a part of a leading non-profit organization that is committed to serving not only the local Twin Cities community but the industry as a whole. The Guthrie offers top-notch employee benefits and staff perks which includes: • Competitive Benefits: Health, Dental, Vision, Health Savings Accounts (HSA), Employer contributions to HSA, Flexible Spending Accounts (FSA), Dependent Care FSA, Group Life Insurance, Voluntary Life Insurance, Long Term Disability, Short Term Disability, Employee Assistance Program, 403(b) Retirement Plan (with employer match up to 4.5% after one year of service), • Transportation: Subsidized passes for Metro Transit buses and trains, discounted pre-tax monthly ramp parking, • Paid Time Off: Generous Paid Time Off (PTO), Volunteer Time Off (VTO), • Complimentary Tickets: To Guthrie productions, • Discounted Tickets: To all shows produced by the Guthrie and to some performances hosted by the Guthrie, • Classes and Camps: Discounts to Guthrie classes and camps The Guthrie Theater engages exceptional theater artists in the exploration of both classic and contemporary plays connecting the community we serve to one another and to the world. Through its extraordinary artists, staff and facility, the Guthrie is committed to the people of Minnesota, and from its place, rooted deeply in the Twin Cities, influences the field as a leading 21st century arts organization. Every year more than 500 people, both on stage and off, help ensure our success in creating and supporting the highest level of theater. As an organization, we are committed to our values of Artistic Excellence, Community, Equity, Diversity and Inclusion, and Fiscal Responsibility. The Guthrie Theater is located in the historic Mill District along the Mississippi River in Minneapolis, Minnesota. As the largest city in the state, Minneapolis offers a large variety of parks, lakes, great food, festivals, malls and more. LAND ACKNOWLEDGMENT The Guthrie Theater would like to acknowledge that we gather on the traditional land of the Dakota People and honor with gratitude the land itself and the people who have stewarded it throughout the generations, including the Ojibwe and other Indigenous nations. Applicants must submit a resume and cover letter to be considered for the position.

Job Description Akkodis is seeking a Strategic Sourcing Manager for a contract with a client in Arden Hills, MN(Hybrid). The ideal candidate must bring proven IT procurement experience to lead sourcing strategies, negotiate contracts, and manage supplier relationships that drive cost savings and performance improvements across global operations. Rate Range: $57/hour to 73/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Strategic Sourcing Manager job responsibilities include: * Develop and implement sourcing strategies for IT hardware, software, and services to support business objectives and drive competitive advantage. * Lead supplier selection and management, ensuring quality, cost-efficiency, and reliability across global operations. * Negotiate contracts and manage RFPs, securing favorable terms aligned with company policies and goals. * Conduct market analysis to stay ahead of industry trends, pricing shifts, and emerging technologies. * Collaborate with internal stakeholders including IT, finance, and legal to align sourcing strategies with organizational needs. * Drive cost optimization and risk mitigation, identifying savings opportunities and managing compliance and performance risks. Required Qualifications: * Bachelor’s degree in business, Supply Chain Management, Engineering, or a related field. * Minimum 5 years in procurement or strategic sourcing, with at least 3 years in the IT sector. * Strong negotiation, analytical, and project management skills. * Proven ability to collaborate with cross-functional teams and influence stakeholders at all levels. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at Pay Details: $57.00 to $73.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description CORPORATE SUMMARY The Company Beacon EmbeddedWorks is a full-service provider of embedded solutions. Its innovative System on Modules (SOMs) are backed by an extensive suite of customization, security, and support services and its dedicated team of experts provide in-house manufacturing and support to accelerate development and reduce risk. All Beacon EmbeddedWorks SOMs are designed, manufactured, and supported in its US-based facility in Eden Prairie, MN. As dependable, pre-certified, and feature dense solutions, Beacon EmbeddedWorks SOMs serve the most strenuous applications, including medical, aerospace and defense, and industrial markets. Beacon EmbeddedWorks operates mostly in the US but also has a small customer base in continental Europe and the APAC. Beacon EmbeddedWorks is part of the Design & Manufacturing division of discoverIE Group plc, a British company listed on the main London stock exchange where it is a member of the FTSE 250 index. What does joining Beacon mean for you? • We are a Top 200 Workplace as voted by our employees, • Multiple options for medical and dental coverages, • Paid life insurance and disability coverage, • 401k with match, • 128 hours of time off per year to start, • Paid holidays The Principal Hardware Engineer defines product requirements, translates requirements to implementable architecture, performs detailed design work, and ensures the end product is optimized for manufacturability. Reports to: Senior Manager of Engineering Location: Eden Prairie, MN office Starting Salary Information: $130,000 Key Responsibilities: Supervisory Responsibilities This role has no direct supervisory responsibilities but does serve as a coach and mentor for other positions in the department Essential Duties & Responsibilities: • Lead electrical design projects and contribute to electrical design best practices, • Instruct, mentor, direct, and check the work of other design engineers, • Translate product requirements into implementable architectures, • Perform detailed electronic design of microprocessor-based platforms and related analog/digital circuits. This will include drawing of circuits themselves after basic analysis and paper design activity using a schematic CAD tool (Cadence OrCAD or Altium) along with simulation as appropriate using tools such as SPICE or HyperLynx., • Conduct design analysis on components and/or assemblies to assist in the development process by ensuring designs are cost efficient, manufacturable, customer focused, and reliable, • Gather technical data and prepare technical documents such as design verification test reports, written rework instructions, PCB placement and routing guidelines and Analysis of Alternatives documents, • Maintain organized history of design artifacts utilizing a version control system, • Complete assigned engineering projects within budgetary and scheduling guidelines, • Communicate with other engineers and may serve as a project manager to coordinate and assure project completion, • Mentor other engineers as they work through day-to-day technical challenges, • Assist or lead in preparing proposal documentation and integrate into customer specifications, • Assist in preparing compliance reports for REACH, RoHS, PFAS etc., • Monitor for component obsolescence using Silicon Expert reports and finding suitable alternates, • Support, demonstrate and drive our core values, • Lead, don't follow, • Consistently deliver, • Never stand still, • Create relationships not transactions, • Interact positively and professionally with all employees and customers, • Maintain reliable attendance, • Perform work safely and adhere to all safety requirements, • Complete required training as scheduled Required Qualifications: • Bachelor of Science in Electrical Engineering, Computer Engineering or equivalent, • 15+ years of experience in product design, • Experience with embedded systems and microprocessor-based design, • Experience with functional aspects of product design including understanding of requirements, general electrical design analysis and documentation creation, design for manufacturing/design for test, and design verification, • Experience with leading teams including engineers from multiple engineering disciplines, • Working knowledge of oscilloscopes, logic analyzers, spectrum analyzers and vector network analyzers, • Protocol-level knowledge of serial interfaces including SPI, I2C and UART, • Experience with analog design concepts and design tools such as SPICE and HyperLynx preferred, • Experience with RF communications such as Bluetooth, Wi-Fi (802.11), and cellular, • Experience with high-speed digital interfaces such as DDR, PCIe, SATA, etc. preferred, • Experience in medical device design or other regulated industries preferred, • Experience with MS Office products including MS Project, • Ability to work with both internal and external (customer) resources, • Ability to analyze customer requirements for feasibility, cost and development timeline, • Strong communication skills including the ability to write technical specifications and design documentation, create and author templates for engineering documents, create project proposals with technical details, present verbally in one-on-one or group settings Physical Demands The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms, • Specific vision abilities required by this job include close vision, and ability to adjust focus The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • The noise level in the manufacturing area is moderate, • The noise level in the manufacturing area is moderate, • This is a full-time, on-site position, • Typical days and hours of work are Monday through Friday, 8am -5pm, but does allow for some flexibility Please note: This position is not eligible for external recruiter or agency placement and is not open to placement remuneration of any kind. All applications must be submitted directly by the candidate, free from external representation, to be considered for the position. Salary Description $130,000 starting salary

Job Description POSITION SPECIFICATION Position: Senior Chemical Engineer Department: Industrial, Process & Agribusiness (IPA) Reporting Relationship: Senior Project Manager, IPA COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . POSITION OVERVIEW & RESPONSIBILITIES The Senior Chemical Engineer plays a key role in the successful execution of projects. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. The Senior Chemical Engineer is responsible for a high level of customer satisfaction by ensuring expectations are clearly communicated and managed – both externally and internally. The successful candidate will also contribute to a dynamic team environment by being proactive, clear and frequent communication, and modeling a highly collaborative working environment. This person will also actively support the business development process, through the writing of proposals and meeting with prospective and current customers. Specific responsibilities will include, but not be limited to, the following: • Actively manages assigned projects, driving them to completion. This will require a combination of strong delegation and follow-up, combined with personal execution of work as needed. Project teams will typically be staffed by people in different KFI office locations., • Applies principles from science to engineering designs and problems., • Develops PFD’s, material/energy balances, simulations (ChemCAD), and process engineering calculations., • Generates P&ID’s and reviews process piping designs., • Develops process equipment specifications and supports procurement., • Supports and leads project development (FEED/FEL) process., • Field experience related to capital project construction and start-up., • Actively directs and support process instrumentation selection and controls programming., • Provides work direction to other team members, including subcontractors, as assigned., • Supports mentoring of younger staff., • Approves final equipment selections and drawing submittals., • Provides technical and engineering support to other departments/disciplines., • Ensures that new opportunities are properly defined, scoped and priced. Actively contributes to all aspects of the business development process (i.e., proposals and customer meetings). QUALIFICATIONS Required • Bachelor’s degree in Chemical Engineering., • Minimum of 15 years’ experience to include CAPEX projects and construction, • Demonstrated proficiency in chemical processing projects and facilities, including industries such as specialty chemicals, resins, plastics, polymers, oleochemicals, inorganic chemicals or biotechnology., • Possess project management skills and knowledge of related tools and processes., • Effective meeting management skills., • Strong attention to detail., • Current experience of being the technical lead., • Strong decision-making abilities., • Adaptable and agile, responsive to quick changes in direction., • Excellent verbal and written communication skills., • Strong interpersonal skills and ability to collaborate with others., • Professional Engineering Registration or willingness to pursue this designation is desired., • Construction support field experience and/or plant operation experience., • Experience in process safety management (PSM) & process hazard analysis (PHA), • Some work locations will feature the tough terrain typical of construction sites., • Travel: May include up to 20% domestic travel at times. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave This position is not eligible for Visa sponsorship. Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. KFI Engineers is an EOE including veterans and disability.

Job Description Quality Engineer Eden Prairie, MN Description CORPORATE SUMMARY The Company Beacon EmbeddedWorks is a full-service provider of embedded solutions. Its innovative System on Modules (SOMs) are backed by an extensive suite of customization, security, and support services and its dedicated team of experts provide in-house manufacturing and support to accelerate development and reduce risk. All Beacon EmbeddedWorks SOMs are designed, manufactured, and supported in its US-based facility in Eden Prairie, MN. As dependable, pre-certified, and feature dense solutions, Beacon EmbeddedWorks SOMs serve the most strenuous applications, including medical, aerospace and defense, and industrial markets. Beacon EmbeddedWorks operates mostly in the US but also has a small customer base in continental Europe and the APAC. Beacon EmbeddedWorks is part of the Design & Manufacturing division of discoverIE Group plc, a British company listed on the main London stock exchange where it is a member of the FTSE 250 index. What does joining Beacon mean for you? • We are a Top 200 Workplace as voted by our employees, • Multiple options for medical and dental coverages, • Paid life insurance and disability coverage, • 401k with match, • 128 hours of time off per year to start, • Paid holidays The Quality Engineer is responsible for supplier management and providing technical support to manufacturing, including leading or supporting quality investigations and continuous improvements projects. Reports to: Senior Manager of Quality Location: Eden Prairie, MN in Office Starting Salary Information: $80,000+ Key Responsibilities: Production Support • Lead or provide cross-functional team support on resolution of quality issues, including returns, complaints, and internal non-conformances., • Guide cross-functional teams using quality tools and techniques to determine root cause and develop corrective actions., • Strong technical writing skills to document investigation reports and support updates and/or creation of procedures., • Lead training as needed to support quality objectives and culture., • Support quality audits, corrective actions, and facilitate supplier changes and qualifications., • Lead incoming quality initiatives and support resolution of vendor quality problems. Assist with developing incoming inspection tools and testing (e.g. FAIR, PPAP)., • Ensure compliance within industry standards and regulations, including IEC, ISO9001, ISO13485, AS9100., • Lead or support internal and supplier audits and facilitate corrective actions as needed., • Support customer and third-party audits as needed., • Assist with regulatory projects including UL certification and ISO accreditations., • Ability to lead Quality Plans or Continuous Improvements projects, meet deliverables, and demonstrate effective project management skills., • Strong technical writing skills with the ability to create project plans., • Bachelors degree in engineering or related field with 3-5 years of experience in manufacturing., • 2-3 years of experience working in electronics manufacturing environment or the equivalent combination of education and experience. SMT experience a must., • Intermediate knowledge of quantitative methods and tools, including SPC, process capabilities, and design and analysis of experiments., • Advanced expertise with problem-solving tools to investigate, document and resolve quality issues., • MS Office experience required. Experience with advanced Product Lifecycle Management (PLM) change management, ERP, and metrics a plus., • Electrical, mechanical, and statistical aptitude required., • Strong oral and written communications skills are required. The ability to represent Beacon EmbeddedWorks in a professional manner to customers, auditors, vendors, and other outside contacts is required., • Able to work in a fast-paced environment with quickly changing priorities to ensure superior customer satisfaction., • Self-motivated with proven ability to apply innovative solutions to problems. The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to sit, use hands to handle objects, tools or controls, reach with hands and arms, stoop, kneel, crouch, talk, and hear., • The employee is required to use fine finger dexterity for operating a computer and keypad or keyboard., • May be requested to lift up to 25-50 pounds, with or without assistance., • The noise level in the manufacturing area is moderate, • This is a full-time, on-site position, • Typical days and hours of work are Monday through Friday, 8am – 5pm, but does allow for some flexibility

Job Description Rani Engineering, LLC is adding Staff Engineers to our growing Water Resources Team. These roles will focus on hydrologic and hydraulic (H/H) analysis, stormwater management, and water quality modeling for a variety of water resource projects. If you are passionate about sustainable water solutions, this is the role for you! Your impact - • Perform H/H analysis using ArcGIS, HydroCAD, SWMM modeling, and Bentley ORD, • Conduct stormwater and drainage system design using AutoCAD Civil 3D or Bentley ORD, • Develop GIS-based spatial analyses for watershed modeling, floodplain mapping, and stormwater planning, • Conduct water quality modeling using P8 or MIDS Calculator (preferred), • Assist in preparing design plans, calculations, and technical reports, • Ensure compliance with local, state, and federal stormwater regulations, • Collaborate with project teams, clients, and regulatory agencies to support project delivery, • Bachelor’s degree in civil or environmental engineering or a related engineering degree, • 0-3 years of experience in water resources engineering, • Strong computer skills, including Microsoft Word and Excel, • Familiarity with H/H modeling for stormwater and drainage analysis through coursework or work experience, • Basic coursework or experience using ArcGIS, • Strong problem-solving skills and attention to detail, • Internship or co-op experience, • Engineer-In-Training (EIT) certification, • Proficiency in ArcGIS for spatial analysis and mapping, • Expertise using HydroCAD and SWMM for H/H modeling of stormwater and drainage analysis, • Familiarity with P8 or MIDS Calculator for water quality modeling is a plus Benefits Rani Engineering, LLC. is proud to offer a comprehensive benefits package. We strive to be competitive and equitable in our compensation practices. We view our work schedules and time off as differentiators. Offering flexibility to work from home and flex working hours are important to our employees’ ability to balance their non-work lives. We offer Open Time Off – time when our employees need it without worrying about an accrual or how much is in the bank. We expect our employees to respect each other and our clients and partners, understanding they will work together to plan their time so that it doesn’t negatively impact other team members or deliverables. Equal Opportunity Statement Rani Engineering is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, sex (including pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, medical disability or physical disability, genetic information, military or veteran status, citizenship, or any other status or characteristic protected by applicable law. NOTE: All Employment Offers contingent upon passing a criminal background check.

Job Description BUILD Renewables is a nationwide engineering, procurement, and construction (EPC) company with a dedicated focus on utility-scale solar and battery energy storage systems. The company was formed due to the increasing demand for renewables with the objective of assembling high-performing project teams. Our goal is to hire the best people and offer them career opportunities that are unique to the industry. Learn more at Position Overview: We are seeking a highly organized and detail-oriented Payroll Coordinator to join our team. This role is responsible for processing payroll for field and office employees, ensuring compliance with union agreements, prevailing wage laws, and multi-state regulations. The ideal candidate will have experience in construction payroll and a strong understanding of certified payroll reporting and labor compliance. Essential Functions: • Process weekly payroll for union and non-union employees across multiple job sites and states., • Maintain accurate payroll records, including timecards, job codes, cost codes, and employee classifications., • Prepare and submit certified payroll reports in compliance with Davis-Bacon, Inflation Reduction Act, and other prevailing wage requirements., • Ensure accurate deductions for benefits, garnishments, and union dues., • Collaborate with project managers and field supervisors to verify hours and resolve discrepancies., • Stay current on union contracts, wage determinations, and labor compliance requirements., • Respond to employee inquiries regarding pay, taxes, and benefits., • Assist with audits and reporting for internal and external stakeholders., • Support HR and accounting teams with onboarding, terminations, and job costing data., • Associate or bachelor’s degree in accounting, business, or related field preferred., • Payroll Certifications (CPP, CCIFP, or similar) can serve as alternatives to a formal degree., • 2+ years of payroll experience, preferably in the construction industry., • Familiarity with certified payroll, prevailing wage laws, and union payroll processing., • Proficiency in payroll and accounting software (ADP, Sage Intacct, or similar)., • Strong attention to detail and ability to manage multiple priorities., • Excellent communication and problem-solving skills., • Experience with multi-state payroll and job costing., • Knowledge of construction industry labor laws and union agreements., • Office-based with occasional visits to job sites., • May require extended hours during peak payroll periods or audits., • General work environment – sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning., • Noise level is usually low to medium; it can be loud on the jobsite., • We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions., • Competitive Salary, • Opportunities for advancement, • On-the-job training and mentorship, • Performance bonuses, • Health, Dental and Vision insurance, • Health Savings Account (HSA), • 401(k) with Employer Match, • Paid time off (PTO), vacation days, and holidays, • Employee Assistance Program (EAP) Employee Status: Full-time (Exempt) Salary / Pay Range: $70,000-$90,000 Location: Minneapolis, MN (Mendota Heights) BUILD Renewables, LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you need assistance or accommodation during the application process due to disability, please contact us at

Job Description Who We Are Quality Work. Quality Results. Bay West stands at the forefront of the environmental consulting and remediation sector. Our dedication to safety, innovation, and our skilled team has driven us for over fifty years, delivering top-tier environmental consulting, industrial, and emergency response services. At Bay West, you'll be driven to innovate and make a real impact on environmental issues, all while advancing your career in a dynamic and supportive environment. This Opportunity We are seeking a motivated and detail-oriented Engineer II to join our team! You will be responsible for ensuring the performance of various remediation systems. This position involves system management and occasional site visits to monitor and optimize remediation systems, ensuring their continuous and efficient operation. Your Key Responsibilities • Ensure effective performance of local remediation systems, including Operations and Maintenance (O&M) tasks, site visits, system operational checks, system and groundwater sampling, system troubleshooting and operational adjustments, system cleanings and maintenance work., • Provide technical support project managers on environmental investigation and remediation projects for Bay West’s various Federal, State, and Private sector clients, • Begin to make technical decisions, conclusions and recommendations based upon regulatory guidance, field experience and training, • Summarize technical results, typically using similar example documents, • Help prepare proposed scope of services that presents a complete list of proposed activities in a logical fashion to avoid client misunderstandings or exposure to liability., • Help prepare appropriate cost estimates that include all costs to complete the proposed activities., • Help prepare technical bidding specifications for excavations, corrective action systems, and other subcontracted activities, • Help prepare feasibility studies that evaluate multiple options, including present value cost estimates., • Assist in preparing project deliverables including correspondence, proposals, data review and interpretation, project reports and remedy determination, remedy implementation and bid specifications, and cost estimates., • Collaboratively work with other staff to problem-solve and produce high quality creative solutions for our customers., • Provide directions to field staff and coordinate field activities with contractors and Bay West staff., • Provide oversight of subcontractors and communicate with project managers., • Conduct field work, focused on remediation system maintenance and optimization, • System work includes air sparge (AS) and soil vapor extraction (SVE) systems and groundwater pump and treatment systems utilizing air stripping units (ASU). Required Qualifications • Bachelor’s degree in Engineering, ideally with an environmental focus, • Three to five years of experience in engineering role, • Engineer-in-Training (EIT) certification, or the ability to obtain it in the near future, • 40-hour HAZWOPER or ability to obtain in 30 days, • Able to obtain site access to secure areas such as Federal or State sites, • Proficiency using Microsoft Office Suite and Outlook, • Ability to work independently, • Driver’s license and ability to get to a site 24/7, • Experience working with various treatment systems, trouble shooting and optimizing system performance include AS/SVE and ASU systems, • Interest in hands-on work, mechanical and technical skills and troubleshooting. Must be comfortable performing a variety of hands-on tasks, including mechanical system troubleshooting, light plumbing and electrical work, and mechanical repair, • Working familiarity with environmental assessment field data collection methods and procedures, • Exceptional problem-solving skills, effective time-management, and strong organizational skills, • Experience supporting multiple projects and meeting deadlines while providing excellent customer service, • Exceptional problem-solving skills, effective time-management, and strong organizational skills, • Knowledgeable about permitting requirements such as underground injection control (UIC) and National Pollution Discharge Elimination System (NPDES), • Knowledge of state and federal environmental regulations and laws, including, cleanup guidance and United States Environmental Protection Agency (USEPA) Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), and Resource Conservation and Recovery Act (RCRA), • Experience with field equipment such as water quality monitoring instruments, photoionization detectors (PIDs), and Trimble global positioning systems (GPS) units, • Thorough understanding of current groundwater, vapor, and soil sampling methods, • Ability to function in work environments that sometimes include high heat; high humidity; extreme cold; roadway traffic hazards; on water (boat operations) and confined spaces, • Occasional work wearing a respirator, • Adequate vision and hearing to safely see teammates hand signals and hear warning communication in low light, • Substantial repetitive movements of the wrists, hands and/or fingers (including reaching, grasping, twisting, pushing, and pulling), • Walking on uneven surfaces & climbing stairs/ladders, • Semi-frequent crouching, bending, stooping and twisting, occasionally in tight spaces, • Sitting in a vehicle for up to three hours straight, • Working while standing during a 12-hour workday, • Frequently lifting up to 10 lbs. over an 8-hour period and occasionally up to 50 lbs. over a four-hour period, • Occasionally lifting 3-6” diameter hoses that weigh approximately 20 pounds over the head onto hose racks Bay West offers a comprehensive benefits package available to eligible employees, including but not limited to paid time off, health insurance options, ancillary benefits to support life at all stages, 401(k), employee assistance programs, and subsidies for professional development. Bay West is an Equal Opportunity Employer.

Job DescriptionJOB TITLE: Seasonal Event Associate (2+ positions available) LOCATION: Viking Lakes 2685 Vikings Circle, Suite 050 Eagan, MN 55121 TYPE: Part-Time/Seasonal, Non-Exempt, $20/hour SUMMARY: Join the team behind some of the most exciting events at Viking Lakes! MV Ventures (“MVV”) is seeking motivated individual(s), working toward or interested in careers in the event industry, to serve in an Event Operations role in support of a variety of Viking Lakes events and programs. In this hands-on role, the Associate(s) will be responsible for site supervision and venue operations to help bring recreational practices, clinics, leagues, and other special events to life within TCO Stadium, Minnesota Vikings Museum and the greater Viking Lakes campus. We’re seeking proactive, independent problem solvers who thrive in fast-paced environments, take ownership of events, and communicate effectively with clients, guests, and partners. This is your chance to gain leadership experience, oversee operations, and make a real impact on every event. Position(s) run from April 1st, 2026 to February 28th, 2027. Exact start and finish dates will be mutually agreed upon and based off venue programming schedules. It is understood that if selected, this role will take priority over other jobs and commitments. ROLES AND RESPONSIBILITIES: • Support the execution of athletic, recreational, corporate, and community events at Viking Lakes venues., • Serve as site supervisor for practices, clinics, leagues, and rentals across TCO Stadium, the Vikings Museum, and other campus facilities., • After training, act as the on-site lead for select events, overseeing logistics and client communication., • Gain hands-on leadership experience with opportunities to plan, coordinate, and execute events., • Manage and maintain event assets, equipment, and supplies., • Assist with event setup and teardown, streamlining processes for efficiency and safety., • Communicate effectively on-site with rental clients, vendors, contractors, and venue stakeholders to ensure high-quality execution., • Ensure event spaces are prepared according to specifications, operational standards, and safety guidelines., • Monitor and evaluate event success, providing post-event reports, recommendations, and insights for continuous improvement in addition to all required operational and financial reporting. QUALIFICATIONS: To perform this role successfully, the individual must be able to perform each essential duty successfully. The requirements listed below are representative of the knowledge, skill and/or ability needed for this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The Seasonal Event Associate(s) will work primarily on-site at the Viking Lakes campus, a dynamic environment featuring sports, hospitality, residential, and commercial facilities. This role requires physical activity, including walking, standing for extended periods, and lifting, and may involve occasional travel to promote events or collaboration with partners. This position will include nights and weekends based on the event schedules. EXPERIENCE AND TECHNICAL KNOWLEDGE: • Experience in event management, facilities, athletics, hospitality, or a related industry preferred, but candidates with a strong willingness to learn and take initiative are encouraged to apply., • Strong organizational and project management skills with attention to detail and the ability to effectively communicate with clients, guests and vendors to meet their needs., • Excellent communication and interpersonal skills, with a focus on reliability, active listening, and resolving concerns in a calm and positive manner., • Demonstrated ability to think creatively and solve problems effectively under pressure while maintaining a customer-focused approach., • Take ownership of select events and projects, proactively identifying areas for improvement and implementing solutions to enhance efficiency and guest experience., • High attention to detail, demonstrating initiative, leadership potential, personal awareness, and integrity in all interactions, ensuring a seamless experience for clients and guests., • Ability to multi-task and work independently with minimal supervision, while also collaborating effectively as part of a team to deliver exceptional service., • Strong customer service skills, with the ability to anticipate needs, resolve inquiries, and maintain a positive, welcoming atmosphere for all guests, vendors, and clients. PHYSICAL DEMANDS: • Must be able to lift, push, pull and/or move up to 30 lbs. Will be on your feet and mobile frequently, both inside and outside of buildings., • Ability to work outside for long periods of time, in various temperatures and weather conditions., • Flexibility to work evenings, weekends, and holidays as required by event schedules. NOTE: This position complies with MV Ventures policies and procedures, Fair Housing, Americans with Disabilities Act, Fair Credit Reporting Act, and other laws and regulations governing commercial and multi-family housing operations. MV Ventures is an Equal Opportunity/Affirmative Action employer, and encourages Women, Minorities, Individuals with Disabilities, and protected Veterans to apply. BENEFITS: MV Ventures provides benefits to all full-time employees including, but not limited to: Health, Dental, & Vision Insurance, employer paid Life Insurance, Health Savings Account, Flexible Spending Account, Paid Time Off, 401(k) & 401(k) match. WHO WE ARE: MV Ventures Management, LLC d/b/a MV Ventures, a Wilf Family-owned company, is a full-service real estate owner, developer, general contractor and property management organization in Minnesota. Our mission is the development, construction, management and activation of best-in-class destinations that transcend generations. Located in Eagan, MN, Viking Lakes is a 200+ acre mixed-use master development and best-in-class destination bringing a vibrant, diverse, and sustainable environment to tenants, residents, partners, and the community. It is innovative, delivering new market concepts to Minnesota while creating a place to live, work and play not just for today, but for the next 150 years. Anchored by the Minnesota Vikings headquarters and training facility, TCO Performance Center, Viking Lakes is also home to Omni Viking Lakes Hotel, Viking Lakes Residences, Twin Cities Orthopedics Eagan Clinic, Training HAUS and the Minnesota Vikings Museum and Locker Room Store. The Viking Lakes Innovation Center, located in the heart of campus, features world-class tenants such as United States Tennis Association – Northern Section, TCO Bio Lab, Clifton Larson Allen, Salvo Soccer, and MV Ventures. TO APPLY: Complete an online application through ADP by clicking here. Applications will be reviewed starting the first week of January 2026.

Job Description We are seeking a talented and motivated Electrical Engineer to join our team! The ideal candidate will have a passion for design, a keen eye for detail, and the ability to work collaboratively with our architects, engineers, and clients. This role offers an exciting opportunity to work on a diverse range of projects, including healthcare, education, public safety, commercial, and industrial. At EAPC, our team of architects, engineers, interior designers, construction managers, and other professionals work together to create stunning structures and designs for optimum performance. Responsibilities include: • Provide electrical design, detailing, and calculations as required for all phases of the design of new buildings and structures, as well as additions to and renovations of existing buildings and structures, • Coordinate electrical designs with other disciplines such as architectural, mechanical, structural, etc., • Edit and write electrical specifications, • Perform electrical investigations and feasibility studies, including the writing of reports and providing cost estimates when required, • Provide mentorship/training to EIT-level staff, • Provide direction to BIM Modelers as required to complete electrical drawings, • Perform construction administration activities such as the review of material shop drawings, responding to contractor RFIs and construction questions, construction site visits, etc., • Perform site visits as required to field verify existing conditions, dimensions, elevations, etc., • Assist project managers in the development of internal design budgets and schedules as required, • Assist the department manager in determining anticipated project scope, deliverables, fees, etc., as required to complete proposals to provide electrical engineering services to external clients, • Assist with and negotiate contracts with customers/clients, • Bachelor's degree in Electrical Engineering, • 10+ years of experience in a firm or consulting environment preferred, • Registration as a Professional Engineer, • Project management and business development understanding, • Experience in 3D modeling, visualization, and modeling software; REVIT, SKM, and AutoCAD strongly preferred, • Working knowledge of engineering systems, • Effective verbal and written communication skills and strong organizational skills, • Problem-solving skills, attention to detail, and motivation to learn, • Collaborative and professional work ethic, • Ability to prioritize and concurrently service multiple projects, • Willingness to travel as required to meet project and corporate demands, • Ability to understand and communicate with professionals of other disciplines, • Valid driver's license Salary Range: $90,000-$120,000/year. The listed pay range represents the company's good faith estimate of the minimum and maximum base rate of pay for this position at the time of the posting. The selected candidate's compensation will be determined based on their work location, qualifications, relevant experience, operational needs, demonstrated performance over time, and internal pay alignment. Benefits include paid time off, holidays, 401k with matching contributions, health insurance with dental and vision coverage, company paid life insurance and disability coverage, discretionary annual profit-sharing bonuses and a career that offers challenging and interesting projects with a quality lifestyle in an engaged and inviting community. Applications will be reviewed immediately. EAPC is an equal opportunity employer disability/veteran. If you need any assistance or accommodation completing this application, please contact human resources at 701-461-7481 or email . Following a conditional offer of employment, a motor vehicle background check and background check will be conducted. Job Posted by ApplicantPro

Job Description Join our team! Our mission is BUILDING COMMUNITIES. IMPROVING LIVES. With a history spanning over 110 years, HR Green has consistently delivered on this mission, establishing ourselves as a trusted partner for our colleagues, clients, and communities alike. Each day, we work to find solutions that inspire our employees and fit our clients' needs to build trust to exceed their expectations. As a leading player in the industry, we're proud to be ranked No. 168 on Engineering News Record's Top 500 Design Firms list in 2025. Our unwavering dedication to cultivating an exceptional workplace environment has earned us the distinguished honor of being recognized as a Best Place to Work. Summary We are hiring a Lead Engineer - Structural on our Water/Wastewater Team! This is a great opportunity for a PE who is interested in working with a dynamic team on a wide range of projects for our Water-Wastewater Team, while mentoring junior team members and ensuring technical success of our projects. You will be part of project teams and will provide structural experience and knowledge to the project team. Our structural group includes structural engineers and designers with diverse backgrounds in an environment that fosters collaboration and development for the team. This role will allow you to make significant decisions to design the buildings and internal process structures for water and wastewater treatment facilities and other related projects. Typical designs include reinforced concrete structures and/or tanks (including water-bearing structures), masonry and/or precast concrete buildings, general analysis of existing buildings and facilities, and design of ancillary items required to support an overall project such as pipe supports, railings, platforms, catwalks, etc. You will be working side-by-side with a team of knowledgeable engineers and professionals in an environment that fosters collaboration and career development. If you are looking to work with a company that will provide mentorship, technical guidance and comradery, client facing opportunities, and involvement in professional organizations, then read on to discover more about this exciting opportunity! Essential Duties and Responsibilities • As an individual contributor, uses professional judgment to direct and independently complete assigned engineering designs., • Actively assists the Project Manager, assigns tasks and schedules to Staff Engineers, Project Engineers and non-exempt project team members, answers questions, and monitors progress., • Completes major design tasks with limited supervision that meet the needs of internal and external customers, primarily design of Water/Wastewater and Utility based projects, primarily with concrete, masonry, and steel design., • Checks the accuracy (formal and informal QA/QC) of assigned tasks completed by other engineering and technical staff., • Makes major design decisions that meet the needs of external customers while coordinating the impact of such decisions on related project efforts., • Pro-actively identifies technical, schedule or financial issues and seeks resolution from the Project Manager and/or the client, as appropriate to the situation., • Assists the Client in bidding or contractor selection if authorized by the Project Manager., • Monitors construction and supervises field personnel assigned to a task, data collection or a specific project., • Responds to contractor questions and issues and prepares and issues project addenda as needed., • Recommends and prepares change orders., • Participates in the creation of engineering services proposals, including the calculation/estimation of time schedules and costs of the proposed work., • Signs and seals engineering documents as an authorized representative of the company., • Previous water/wastewater experience strongly preferred., • Must have a bachelor’s or master’s degree in engineering from an accredited four-year or graduate engineering university in a relevant discipline, • Professionally registered (P.E.) in one or more states in which HR. Green, Inc. conducts business (or have the ability to obtain such registration within six months of employment)., • Possess ten or more years of design/engineering experience and a demonstrated ability to act as an authorized agent of the company to sign engineering documents., • Possess strong technical verbal and technical writing skills and be able to read technical literature and engineering plans., • Possess strong analytical and problem-solving skills and be able to apply professional knowledge to the solution of both routine and non-routine tasks and engineering activities., • Proficient knowledge of computer use and office software (Word, Excel, Bluebeam, etc.)., • Working knowledge in office automation, CADD, and engineering automation tools. AutoCAD, Civil3D, and Revit preferred., • Must possess strong analytical and problem-solving skills and be able to apply professional knowledge to the solution of both routine and non-routine tasks and engineering activities. Not only does HR Green provide you with a place to grow, thrive, and enjoy your work, but we are also dedicated to delivering a comprehensive and multi-faceted benefits package. Visit our website for detailed total rewards information. Compensation Range $101,200.00 - $161,600.00 The expected compensation range for this position is displayed in accordance with the Minnesota Omnibus Labor and Industry Policy Bill Article 7 Section 2 and the Illinois Salary Transparency amendment to the Equal Pay Act of 2003. The final agreed-upon compensation is based on a number of factors, including but not limited to: individual education, qualifications, skills, prior work experience, competencies, and geographic work location. The total annual compensation package may consist of a base salary and eligibility to participate, after a qualifying period, in our performance and discretionary incentive bonus program(s). HR Green is proud to be an affirmative action/ equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or other classification protected by applicable federal, state or local law.

Job Description Bolton & Menk has an exciting opportunity for a Project Engineer, PE to join our Greater Midwest - Land Development team in our office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community design and engineering solutions across the Southeast, Midwest, and beyond. In this role, you will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! What You Will Be Doing: • Responsible for the management planning, scheduling and performance of multiple site engineering projects and personnel., • Work closely with Project Managers in understanding client needs and expectations., • Review and/or prepare preliminary reports and feasibility studies, • Read, interpret and prepare site engineering plans, specifications and reports, • Provides technical advice regarding design, construction or modification and repairs to clients, and other staff members, • May assist with business development activities (client needs, research, proposals, etc.) What We Are Looking For: • Bachelor's degree in Civil Engineering from an accredited college or university, • Licensed Professional Engineer in the State of Minnesota, • 4+ years' progressive experience in the civil engineering field, including experience in private and/or public land development projects, • Experience in plan and specification development with design contract administration, • High proficiency in AutoCAD Civil 3D, • Knowledge of local site permitting processes and requirements Salary Range: $68,000 - $120,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance Bolton & Menk, Inc. specializes in providing community infrastructure solutions. Since 1949, we have been committed to improving quality of life through engineering excellence and client satisfaction. From advocating for our communities to designing their dreams to finding funding; we take pride in our work because we live in these same communities. Today, Bolton & Menk has more than 1,000 employees throughout more than 35 locations in Minnesota, Iowa, North Dakota, North Carolina, South Carolina, and Colorado providing services to more than 400 communities and agencies. Learn more about our history here: Salary Range: $75,000 - $120,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has several benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: · Competitive compensation plan - overtime compensation available to most employees · Discretionary bonuses available to most employees · ESOP - Employee ownership (ESOP); 100% company-paid contributions · 401(k) Match Program · Paid time off (PTO) · Volunteer Time Off (VTO) · Six-paid flexible company holidays · Two floating personal holidays for events that are important in your life · Tuition reimbursement · Parental leave · Short term and Long-term disability · Dependent care reimbursement · Employee assistance program · Health insurance · Flexible spending accounts · Life insurance · Vision insurance OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets.

Job Description Role: Senior Business Development Professional z Internal Role Title: Door Opener Job Type: Project-based, Part Time, Flexible Hours (typically 15-30 hours per week) Remote – based anywhere within the Continental US About Kopp Consulting The Door Opener® Service has helped thousands of business leaders and salespeople secure initial meetings with executive level decision makers, opening new doors to large sales, in medium size as well as Fortune 500 companies. During a period of time when gaining new customers has become almost impossible, Kopp has developed a business model that helps clients fill their pipelines and achieve the growth their competitors only dream about. Kopp Consulting has been on the Inc. 5000 list of fastest growing U.S. companies for two consecutive years and won the Stevie award for Sales Outsourcing Provider of the Year. What is a Door Opener? If you are you an experienced business developer who enjoys opening new prospect doors and wants to earn great money utilizing your talent in a part time, project based, remote position, consider joining one of the best sales teams in the country in providing a service which is critical to the growth, profit and success of most businesses. Our Door Openers are responsible for reaching out to prospective clients, creating initial interest and securing meetings with key decision makers. Responsibilities: • Securing important initial meetings with pre-selected prospects on behalf of our clients, • Calling, emailing and following up with a provided list of contacts to capture their attention, • Opening and maintaining new dialogues via phone and email with our clients’ prospects, • Scheduling initial meeting once relevant prospects express interest, and ensuring that our client has the background and information to achieve the optimal outcome from each meeting, • Understanding prospect list strategy and communicating changes to the research team, • Confirming meetings, writing meeting reports and bi-weekly reviews, tracking performance and reporting to clients and management, • Working with CRM tools to record all activity on behalf of our clients, • Working with prospecting and research tools and with our research department on refining prospect lists, • Attending internal and external meetings via videoconferencing, • 10+ years sales / business development experience with a successful track-record of landing meetings with executive-level prospects (C-level, SVP, VP, Director), • A 4-year college degree is required, advanced degree is a plus, • Advanced computer proficiency – strong Excel and MS-Office skills, proficiency with Outlook, Google Suite/Apps, file sharing, Zoom, CRM and prospecting platforms;, • Exceptional at navigating large organizations to the find the right decision makers, • Great at the consultative sale, especially when decision makers are hard to find and difficult to reach, • Strong ability to engage prospects and their assistants in dialogue, quickly build rapport, actively listen and maneuver conversations in real time to achieve the maximum number of meetings possible, • Self-motivated, disciplined, methodical, detail oriented and enjoy a good challenge, • Known for delivering results with a high level of initiative, effort and commitment, • Strong written communication skills with the ability to write short/compelling/personalized/non-salesy emails and demonstrate clear/concise/grammatically correct speech, • Knowledge of using research/insights to make emails/voicemails/live dialogue even more compelling, • Ability to learn, understand and communicate complex information, • Always provide clients, prospects and team members (at all levels) with superior support, service and respect, • Proven experience using CRM and prospecting software tools, • Excellent interpersonal skills and ability to work effectively with different personality types, • Ability to exercise independent judgment and work autonomously with little supervision, • Outstanding organizational skills, methodical with superior attention to detail, • Highly autonomous, self-directed, proactive and comfortable working within a dynamic environment

Job Description POSITION SPECIFICATION Position: Senior Controls Engineer - Level IV Department: Performance Group (PG) Reporting Relationship: Director of Controls, PG COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . POSITION OVERVIEW & RESPONSIBILITIES The Senior Controls Engineer (Level IV) plays a key role in the successful application of controls to a mechanical HVAC design. This individual will review and understand how HVAC equipment operates at both the individual unit level and in concert with other equipment at the whole building level. The successful candidate will prepare the control documents portion of the overall mechanical design, which includes schematic drawings, point lists, sequences of operation, and specification sections. To provide high quality control documents, the Senior Controls Engineer will be capable of implementing entire control systems, from initial hardware design to final system tuning, and have past experience. As required, the individual in this role will provide field assistance to support controls system project delivery. Field assistance may include communicating design intent and details, answering technical questions, and participating in any portion of the control system project as required, seeing it to completion. The Senior Controls Engineer will manage and/or act as the controls lead for larger projects from start to finish. Regular collaboration is necessary within our controls and commissioning teams, and with others in the industry to keep current and this individual will act as the controls subject matter expert, drive controls standards and mentor junior staff. The successful incumbent will be constantly challenged to create better, practical, and sustainable solutions. Specific responsibilities will include, but not be limited to, the following: • Lead junior members in the preparation of control documents portion of the overall mechanical design: schematic drawings, point lists, sequences of operation, and specification sections., • Stay current on control strategies and code changes., • Participate in training, internal and external., • Obtain and maintain technical certifications as needed., • Stay current on control systems programming and implementation practices., • Construction administration efforts such as running project planning meetings, performing control submittal reviews, and other support as required., • Provide field assistance to support controls system project delivery., • Communicate design intent and details, answer technical questions, participate in any portion of the DDC control system project construction as required, seeing it to completion., • Regular collaboration within our controls and commissioning team, and with others in the industry to keep current., • Constantly challenge traditional practices to imagine better, practical, and sustainable solutions. Helps define control standards., • Create control hardware design and installation drawings, including equipment selection to provide bill of materials., • Mastery of PLC and/or DDC control system programming software., • Mastery of SCADA and/or DDC graphic screen development software., • Edit, write, and review specifications., • Procure controls equipment for projects as required., • Provide proposals and pricing to clients., • Manage subcontractors., • Fine-tuning and troubleshooting of control systems., • Provide the control expertise as necessary to deliver high quality control projects., • Manage large projects from start to finish., • Participate in all aspects of business development., • Proposals., • Meetings with clients., • Interviews., • Self-study as necessary., • Teach and mentor others as called upon in capacity as a subject matter expert. QUALIFICATIONS Required • 10+ years of relevant experience., • Ability to manage a project from start to finish., • Ability to meet with customers to establish scope requirements and define projects., • Ability to actively contribute to marketing and business development., • Experience mentoring others., • Demonstrated consistency in successful combination of programming and/or large project management., • Ability to independently execute all projects by KFI in area of expertise., • Represent the company in a professional matter., • Proficient in use of MS Office (Word, Outlook, Excel)., • Excellent verbal and written communication skills., • Strong interpersonal skills and ability to collaborate with others., • Knowledge of computer technology and specific areas of application., • Bachelor’s degree in Computer Science, Mechanical, Electrical or Computer Engineering is preferred. KFI will consider candidates who may not have a formal engineering degree but have worked in either the HVAC or electrician trade or have experience designing building automation systems., • Experience programing boilers and chillers., • Proficiency in one or more of the following software platforms:, • Tridium Niagara, • Allen-Bradley Studio 5000, • Emerson Machine Edition, • AVEVA Solutions, • Some work locations will feature the tough terrain typical of construction sites or require lifting or moving field testing equipment. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Paid Volunteer Time Off, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. KFI Engineers is an EOE including veterans and disability.

Job Description Role: Sales Business Development - Part Time, Project Based, Flexible Hours - Remote Job Type: Flexible Hours, 100% Remote, Project Based, Part-Time Description: We are one of the best sales teams in the country providing a service that is critical to the growth, profit, and success of most businesses. Known as Door Openers, our main focus is booking meetings with the right prospects. We laser focus on securing the best prospect meetings for our clients. The right candidates enjoy the thrill of booking meetings and have at least 10 years of experience making outbound calls booking meetings with new prospects. Potential to earn full-time pay while working remotely, part-time/flexible hours. As a sales unicorn, you succeed at booking meetings with senior-level executives across any industry. As long as KPIs are met, you have the freedom to make your own schedule with vacation. You Should Apply: If you are a senior-level, enterprise sales executive who is looking for a remote and flexible schedule. You have a high track record of consistently achieving new business goals. Are a self-starter, very organized, and comfortable with daily use of CRM. Required skills and experience: • 10+ years' experience securing meetings with new executive-level prospects (C-level, SVP, VP, Director), • Strong ability to engage prospects and their assistants in dialogue, quickly build rapport, actively listen and maneuver conversations to achieve the maximum number of meetings possible, • Self-motivated, disciplined, methodical, superior attention to detail, • Advanced computer proficiency with CRM, MS-Office, file sharing, and Zoom, • Secure and schedule initial meetings with high-level decisions makers on behalf of our clients, • Articulate the value proposition with a prospect by phone, voicemail, and/or email to maximize the number of meetings, • Maintain daily CRM activity data and utilize CRM reports to strategize activity level for best results, • Ability to learn, understand and communicate complex information gained to prepare clients for prospect meetings, • Confirm meetings, write meeting reports and bi-weekly reviews, track performance and report to clients and management, • Attend internal and external meetings via videoconferencing, • Work with prospecting and research tools and with our research department on the refining prospect list, • Provide clients, prospects, and team members (at all levels) with superior support, service, and respect, • Salesforce aptitude test and Role Play are required in our interview process., • Must have access to a reliable full operating PC or Mac and stable Wifi The Door Opener® Service has helped thousands of business leaders and salespeople secure initial meetings with executive-level decision-makers, opening new doors to large sales, in medium size as well as Fortune 500 companies. During a period of time when gaining new customers has become almost impossible, Kopp has developed a business model that helps clients fill their pipelines and achieve the growth their competitors only dream about. Kopp Consulting has been on the Inc. 5000 list of fastest-growing U.S. companies for two consecutive years and won the Stevie award for Sales Outsourcing Provider of the Year.

Job Description Spectrum Safety Solutions: With approximately 1,500 employees operating in more than 20 countries, Spectrum Safety Solutions is a global leader in fire detection and suppression solutions for high-hazard applications across verticals such as critical infrastructure, oil and gas, marine and clean energy. Our global team leverages strong customer relationships across four recognized brands, Det-Tronics, Marioff, Autronica, and Fireye, to deliver differentiated lifecycle solutions and advance growth across key segments. Carved out from Carrier’s Fire & Security business in July 2024, Spectrum Safety Solutions is now a privately-held company under the ownership of Sentinel Capital Partners. Det-Tronics: We make the world a better place to live! At Spectrum’s Det-Tronics, we build and maintain comfortable, accessible, efficient, healthy, safe, secure, and sustainable environments. Det-Tronics is a $180M technologically innovative, projects-based global brand protecting customers in many challenging environments with high end flame and gas detection products and systems. Det-Tronics is a part of Spectrum Safety Solutions and has a global footprint with manufacturing sites in the U.S. and sales presence in all key geographies. Principal Responsibilities: The Systems Manufacturing Technician plays a critical role in the mechanical and electrical assembly of Fire and Gas Control Panels. This position requires a detail-oriented and results-driven professional capable of performing assigned production duties while adapting to shifting work priorities. The ideal candidate will possess strong communication skills and collaborate effectively with cross-functional teams, including Engineering and Purchasing. In this role, you will be responsible for assembling and wiring control panels, setting up and operating test equipment, troubleshooting panels, and maintaining key production metrics. A strong commitment to safety, quality, and efficiency is essential. Additionally, the technician should have a proactive, teamwork-oriented mindset and be willing to support continuous improvement initiatives alongside the supervisor. Essential Functions: * Perform mechanical fabrication of metal panels using drill presses, saws, and various power tools. * Wire control panels utilizing a broad range of wire gauges, ensuring a clean, professional, and high-quality finish. * Set up and operate test equipment to validate functionality and troubleshoot panels as necessary. * Accurately interpret and work from mechanical drawings and electrical schematics. * Package, organize, and deliver assembled goods to the warehouse within designated timelines. * Maintain and update key performance metrics related to safety, quality, delivery, and inventory. * Manage multiple projects simultaneously while coordinating with multiple Project Engineers. * Adhere to and enforce safety protocols and operational procedures at all times. * Work independently as well as collaboratively within a team-oriented environment. * Assist in process improvements and support operational efficiency initiatives. * Perform additional duties as assigned by the supervisor. Required Qualifications: * High School Diploma or GED. * Minimum of 2 years of experience in the military or an electro-mechanical industry. * At least 2 years of experience using and handling handheld power tools safely and effectively. * Strong ability to read and interpret electrical and mechanical drawings and symbols. * Capable of lifting and handling materials up to 30 lbs. Preferred Qualifications: * Excellent organizational and communication skills with a proactive, self-starter attitude. * Ability to perform effectively under pressure, meet production deadlines, and maintain high-quality work standards. * Willingness to work overtime and weekends when necessary to meet project demands. * Strong ability to follow instructions and collaborate respectfully with colleagues and leadership. This role offers the opportunity to work in a dynamic and hands-on manufacturing environment where attention to detail, technical skills, and a commitment to quality contribute to the overall success of the production team.

Job Description Our client is seeking a skilled Structural Engineer to support the design and execution of large-scale steel erection projects nationwide. This position plays a critical role in developing engineered bracing, lifting, and sequencing plans that ensure safety, stability, and efficiency in the field. The ideal candidate has a strong understanding of structural steel behavior and a collaborative mindset that bridges engineering with field operations. Responsibilities: * Perform structural analyses and stability evaluations for steel erection projects * Design and review engineered bracing systems, lifting devices, and crane pick plans * Develop sequencing strategies to ensure safe and efficient erection methods * Collaborate with project management and field teams to solve complex engineering challenges * Utilize CAD and modeling software to create detailed drawings and sequencing visuals * Conduct occasional site visits to assess conditions and communicate design intent * Provide technical guidance to internal teams, clients, and subcontractors Requirements: * Professional Engineer (PE) license required; must be licensed or eligible for licensure in Wisconsin or Minnesota * Minimum 6 years of experience in structural engineering; steel erection experience strongly preferred * Proficiency in Tekla or similar design/modeling software; Bluebeam and Microsoft Office proficiency required * Strong understanding of steel fabrication, erection practices, and field coordination * Excellent communication, problem-solving, and organizational skills * Willingness to travel occasionally to project sites (typically short trips) Why Join Our Client: Our client is a leading structural steel contractor with a strong reputation for precision, safety, and reliability across complex projects nationwide. Their engineering team plays a direct role in shaping how projects are planned and executed in the field. This role offers competitive pay, performance-based bonuses, full family medical coverage, 401(k) matching, and generous PTO—all within a company culture that values innovation, collaboration, and long-term career growth. About J.Riley Recruitment: J.Riley Recruitment is THE Veteran-Owned Business connecting Military Veterans and Top Professionals with the Best Companies. Since our founding in 2020, J.Riley Recruitment has leveraged over a decade of Talent Acquisition expertise to deliver exceptional results. Our network extends coast to coast, empowering organizations nationwide to overcome challenges and achieve success. Built on a foundation of integrity, discipline, and precision, we bring the same operational excellence and adaptability to recruitment that defines top-tier organizations. By understanding our clients' unique challenges and aligning with their goals, we deliver high-performing talent that drives long-term success.

Job Description Why Redpath? At Redpath, you’ll be valued for who you are and supported in where you’re going. We’ve created a culture rooted in trust, teamwork, and genuine relationships, where caring is at the core of how we treat each other and our clients. You’ll do meaningful work here with people who bring a positive, solution-focused mindset to every challenge. Our team is proactive in all we do, taking initiative, clearing roadblocks, and staying ahead for our clients and each other. Here, your voice matters, your growth is a priority, and your work drives real impact. We’re driven to improve, grow, and deliver excellence together, personally and professionally. This isn’t just a job. It’s a place to build a career and a community. The Transaction Advisory Services Team The Redpath Transaction Advisory Services (TAS) team is comprised of former Big Four CPAs and large consulting firm professionals who provide private equity and corporate clients buy side and sell side financial accounting due diligence. The TAS team actively engages in assessing a target’s quality of earnings, analyzing cash flows, reviewing working capital, identifying key business drivers, reviewing forecasts, and conducting comprehensive discussions with management and their advisors. They also routinely team with the firm’s various stakeholders to deliver a truly integrated solution to clients. As a Transaction Advisory Services professional, you will work with fast-growing companies and private equity firms on complex deals, help to identify key value drivers, challenge assumptions about future performance, search for and advise on hidden value, and work with other teams to deliver an integrated approach to our clients before, during and after the transaction. Responsibilities: • Participate in financial due diligence engagements related to the acquisition or disposal of businesses by private equity investors or strategic corporate buyers., • Identify key risks and potential deal breakers, assess the strengths and weaknesses of the business against industry benchmarks, and assist in the evaluation of the potential transaction in the context of the clients’ investment strategy., • Prepare and analyze financial results of targets including quality of reported earnings, net assets, and cash flows; assess key operational data., • Identify issues that impact purchase price and deal structuring., • Synthesize and convert data into meaningful information used to drive observations, conclusions, and recommendations for discussions with target management., • Assess findings to be incorporated into the client’s valuation, sale and purchase agreement., • Assist in the construction of deal-oriented reports and presentations for clients., • Participate in meetings and conference calls with target company management and with client personnel and serve as a secondary point of contact for client personnel with respect to day-to-day execution matters., • Bachelor’s or Master’s degree in Accounting and/or related major, • CPA or in process of obtaining certification, • Minimum 2 years audit experience at a top accounting firm, • Minimum 2 years experience in due diligence group, • Working knowledge of US GAAP, • Strong excel and power point skills required., • Driven, self-starter, • Decisive, critical thinker, highly analytical, • Team oriented personality with maturity to work well individually with clients, • Ability to travel on-site to clients as needed, • Professional in style and demeanor/exercises good judgment, • Excellent verbal and written communication skills including the ability to articulate to senior members of target management, client representatives and colleagues, • Strong project management skills, • Ability to thrive and be effective in fast-paced culture, • Caring - We show genuine care for our clients and colleagues through meaningful relationships, collaboration, and a constant commitment to adding value in everything we do., • Proactive - We take initiative, resolve potential obstacles, and are intentional with solutions provided to stay ahead of challenges and opportunities for our clients., • Positive - We cultivate a solution-oriented, supportive culture that embraces change, encourages collaboration, and thrives in the face of challenges. Redpath and Company offers a comprehensive benefit package, including: • Medical, Dental, and Vision plans, • HSA and FSA, • Voluntary Long-Term Disability, • Company paid Short-Term Disability, • Paid parenting leave Redpath and Company is an equal opportunity employer, and we use E-Verify to confirm the identity and employment eligibility of all new hires.

Job DescriptionDescription: Summary: The Transaction Manager is a high-agency, detail-oriented, and execution-focused professional responsible for driving NES’s most critical financings, M&A transactions, and project closings. This role involves organizing due diligence, reviewing transaction documents, coordinating across departments, managing internal/external legal support, and ensuring company financings close on time across multiple transaction types. This position requires advanced organizational skills, cross-functional communication, and exceptional attention to detail, especially in a high-pressure, fast-moving environment. The Transaction Manager must be willing to learn quickly and continuously, and semi-regularly work outside regular hours to meet closing deadlines. Essential Functions: • Own & drive the closing process for all NES’ transactions including but not limited to: construction loan financings, interconnection agreement financings, ITC sales, partnership flips, permanent debt conversions, as well as MIPA-based CSG acquisitions and sales., • Track and maintain status/execution dashboards, closing diligence checklists, and misc. document logs for a high volume of CSG assets across MN, ME, IL, NY, and other active NES markets., • Serve as internal quarterback for due diligence collection, organization, and dataroom readiness. Coordinate with external financiers, buyers, and internal departments (legal, EPC, finance, asset management)., • Manage and coordinate review of various transaction & loan documentation, including debt financing agreements, MIPA docs, TCTAs, tax equity partnership agreements, and assignment and assumption agreements., • Collaborate with NES’s in-house counsel, outside counsel, and cross-functional teams to push deals to closing., • Track and flag deliverables and obligations, including but not limited to: various consents, estoppels, UCCs, and misc. other items., • Indirectly manage various staff members across the organization in support of transactions, • Maintain and organize Procore & SharePoint folders and closing materials for audit-readiness., • Coordinate and manage the execution of special projects and helm select initiatives at the direction of company leadership (safe harbored module allocation, major equipment audits, etc.)., • Contribute to the NES Investment Committee: assist in the creation and review of memos, financial models, and risk assessments., • Evaluate current asset performance and pipeline to identify risks, gaps, and improvement opportunities, • Partner with VP of Project Execution on financing prioritization and internal bottleneck removal., • Identify recurring legal or diligence inefficiencies and propose scalable improvements., • Support occasional special projects (e.g., tax strategy changes, safe harbor related matters, intracompany systems overhauls, etc.) Competencies: • Technical or professional proficiency in project finance workflows., • Mastery of diligence coordination, data organization, and timeline management., • Exceptional attention to detail and internal follow-through., • High tolerance for urgency, ambiguity, and shifting priorities., • Communication: written, verbal, meeting facilitation, and email management., • Team-first mindset and strong interpersonal skills., • Comfortable leading without authority and pushing for cross-functional accountability., • Learning on the fly and continuous improvement., • Process creation and refinement., • Advanced understanding of renewable energy project contracts (e.g., MIPAs, loan agreements, ITC sale agreements) as well as corporate entity structures. This role can be remote but may require occasional travel to Minnesota headquarters or other project locations. This position may require evening or weekend availability to meet tight transaction deadlines. Physical Demands: This position is mostly desk-based and requires extensive computer use, communication over email/video, and occasional lifting of files or equipment. Position Type/Expected Hours of Work: Full-time role. Non-standard hours will be expected during critical closings or deliverable deadlines. Travel: Minimal travel expected; occasional travel for deal closings or leadership collaboration may occur. Required Education and Experience: • Bachelor’s Degree (Preferably in finance, legal or business-related fields)., • 3–7 years of experience in renewable energy transactions, legal operations, or project finance support., • Experience in community solar, with direct familiarity with MN and ME markets preferred (IL, PA or NY experience welcomed as well)., • Experience coordinating closings and managing due diligence across large portfolios., • Familiarity with construction debt, permanent debt, tax equity, and MIPA frameworks., • Strong organizational, writing, and cross-functional communication skills., • High proficiency with Microsoft Office Suite, SharePoint, Procore, and Smartsheet., • Strong working knowledge of how legal documents flow through a transaction., • Experience managing transactions support staff or document-intensive teams. Preferred Qualifications: • Prior experience at a solar developer, fund, or law firm supporting project finance., • MBA or JD helpful but not required., • Financial modeling literacy a plus. Novel Energy Solutions L. L. C. is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. #LI-Remote

Job Description Join Animal Humane Society as an Event/Peer-to-Peer Fundraising Strategist and help empower communities to make a difference for animals! In this dynamic role, you’ll lead innovative fundraising initiatives—from the Walk for Animals to creative supporter-led campaigns—that inspire individuals and teams to raise critical funds. If you bring expertise in peer-to-peer fundraising, digital campaign management, and relationship building—and are passionate about connecting people to a cause they love—this is your chance to drive impact and grow your career in a purpose-driven environment. Salary: $60,000-70,000 annually Schedule/Location: • Full Time; Monday-Friday Job Summary: The Peer-to-Peer Fundraising Strategist is a creative, community-minded fundraising leader who grows and manages Walk for Animals fundraising and other supporter-led fundraising efforts. This role designs and leads initiatives that empower individuals and teams to raise funds for animals—whether through the Walk for Animals, social media challenges, personal milestones, tribute campaigns, or other community events. Essential Functions Strategy and Planning • Develop and implement a comprehensive peer-to-peer fundraising strategy focused on growth, engagement, and impact., • Manage all peer-to-peer fundraising strategies for AHS’s annual Walk for Animals event., • Identify opportunities to leverage existing events, holidays (e.g., National Pet Day), and supporter milestones (e.g., birthdays, pet adoptions) for fundraising., • Launch and manage digital campaigns and supporter toolkits for events like birthday fundraisers, memorial pages, walk/run fundraisers, and DIY initiatives., • Oversee the setup and optimization of P2P fundraising platforms (e.g. Classy, JustGiving, Facebook Fundraisers)., • Cultivate relationships with supporters who are passionate about animals and want to make a difference through fundraising., • Provide guidance, motivation, and recognition to fundraisers throughout their campaigns., • Collaborate with marketing to amplify campaigns via email, social media, and storytelling., • Collaborate with corporate relations to identify, secure, and fulfill Walk sponsorships and partnerships., • Coordinate with the animal care and adoption teams to showcase impact stories that resonate with fundraisers and donors., • Track campaign results and fundraising performance using CRM systems and digital dashboards., • Produce regular reports to inform strategy and share successes with internal stakeholders., • Continuously test and improve campaign approaches based on insights and supporter feedback., • Communicate in a positive and professional manner with customers, other employees, and volunteers. Additional Information: Schedule and Attendance: • Regular, predictable attendance, punctuality, and availability to work during operational hours., • Attend and participate in regular team meetings, all staff meetings, and one-on-one meetings with direct leader., • May be required to work at a different site based on department needs., • Primarily office/desk based. Experience: • 3+ years of experience in peer-to-peer or digital fundraising., • Experience with online fundraising platforms (e.g. Classy/GoFundMePro, Facebook Fundraisers)., • Ability to work in a professional and positive manner., • Excellent interpersonal and communications skills, both written and verbal, especially in donor-facing interactions., • Must have ability to work as a member of the team and partner collaboratively with external and internal customers and departments., • Strong project management, attention to detail, and organizational skills., • Prolonged sitting at a desk., • Reliable transportation required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for this role. Duties, responsibilities, and activities may change at any time with or without notice. Benefits About AHS Every year, Animal Humane Society provides direct care and services to help thousands of animals in need across Minnesota. As one of the nation's leading animal welfare organizations, AHS is transforming the way shelters care for animals and engage their communities. From innovative medical and behavior programs to investments in outreach and advocacy, we’re advancing animal welfare and creating a more humane world for animals everywhere. Why Work Here • Make a difference in the lives of animals and people, • Join a team of coworkers who love animals as much as you do, • Work-life balance, • Unique animal adoption benefits and discounts on veterinary care and pet supplies, • Health insurance coverage for full time staff includes the following: medical, dental, vision, health savings account, flexible spending account for health care expenses and dependent care, voluntary accident insurance; critical illness insurance; hospital indemnity insurance; employee- paid supplemental life; employee-paid accidental death & dismemberment; and long term disability insurance., • Employer-paid benefits for full time staff includes the following: basic life insurance, basic accidental death and dismemberment insurance, short-term disability., • Support for student loans: we are a Public Service Loan Forgiveness qualified employer, • Mental Health and Counseling Support: all employees have access to our Employee Assistance Program with 3 free counseling sessions per year, • 401(k) with company match, • Nine paid holidays for full-time staff, • Paid floating holidays for part-time and full-time staff (up to 4 days per year based on start date), • Paid Time Off for part time and full time staff (amount is based on hours worked and FTE status) As an organization dedicated to making the world a more humane and compassionate place for animals, we know that people are at the heart of all that we do. Animal Humane Society’s commitment to diversity, equity, and inclusivity is essential to our mission and shapes our culture, our work, and the services we provide. At AHS we embrace and honor the inherent dignity and diverse experiences of our team members, volunteers, board members, partners, clients, and visitors, regardless of race, ethnicity, religion, gender identity, sexual orientation, age, ability, or income. Working together to instill equity and inclusivity within our organization will allow us to better serve the people and animals of Minnesota, and ultimately have a positive impact on animals in our care.

Job DescriptionTITLE: Development and Communications Strategist REPORTS TO: Vice President for Development DEPARTMENT: Development LOCATION: Minneapolis, Remote/Hybrid Eligible STATUS: Non-Exempt; Full-Time, 40 hours per week COMPENSATION: $36.00 - $41.00 per hour; Benefit Eligible SUMMARY The Development and Communications Strategist is a key contributor to advancing MacPhail’s mission through the thoughtful integration of fundraising and communications strategies. This position leads the strategy and execution of the annual giving program, and the content creation and digital communications strategy and execution across the organization. While reporting directly to the VP of Development, the Director of Marketing and Communications will supervise the content and communications work of the role. The role blends creative storytelling with donor-centered fundraising practices and data-driven decision-making. Success in this role will thrive at the intersection of development and communications and play a vital role in shaping how we engage donors, market programs to current and potential students and their families and communicate our impact to the community. RESPONSIBILITIES AND ESSENTIAL FUNCTIONS Annual Giving Strategy and Execution (50%) • Develop and manage a comprehensive, multi-channel annual giving strategy, including direct mail, email, and social media appeals, • Oversee donor segmentation, calendar planning, copywriting, design coordination, and production, • Collaborate with VP of Development to establish and meet annual giving goals., • Support donor stewardship efforts such as impact updates and special campaigns (Give to the Max Day, year-end fundraising), • Monitor results, analyze performance, and adjust tactics accordinglyContent Creation and Writing (30%), • Write compelling, mission-aligned content for fundraising appeals, stewardship communications, newsletters, donor communications, website, brochures, one-pagers and more, • Support multimedia content creation efforts—including basic video editing, graphics, and short-form digital content—for fundraising campaigns, social media, donor engagement, and other programs as needed, • Partner with program and marketing teams to develop promotional content for classes, events, and community impact, • Collaborate with Director of Marketing and Communications and other marketing team members to manage the editorial calendar across marketing and fundraising, • Source stories from across the organization that can drive enrollment for prospective students and student families and illustrate our mission, programming and the value of support for a donor audience, • Collaborate with Director of Marketing and Communications and other marketing team members to maintain brand standards and a consistent tone and voice across platforms and departments, • Meet regularly with the Director of Marketing and Communications and attend Marketing team meetings as neededDigital Communications Strategy, Implementation, & Reporting (15%), • Manage and implement digital fundraising and marketing efforts, including but not limited to email campaigns, • Develop and maintain a digital content calendar in alignment with development, enrollment and other key program priorities, • Use analytics to report on fundraising digital engagement metrics and guide strategy improvementsData Management/Hygiene (5%), • Support the teams in ensuring accurate donor, student, and student parent records in Raiser’s Edge/NXT and HubSpot, • Work with database specialist and digital marketing manager to run queries and reports to inform strategy, support campaign segmentation, performance tracking, and donor analysis and/or work closely with data owners of other systems across the organization as needed to coordinate efforts (e.g. development, marketing and student services), • 5+ years of experience in nonprofit fundraising and/or communications, with a demonstrated track record of managing annual giving and donor communications, required, • Bachelor's degree in marketing, communications, or philanthropy related field, required, • Excellent writing and editing skills, with experience creating content for a range of audiences and platforms, • Experience using CRMs (e.g. Raiser’s Edge, Salesforce) and familiarity with tracking, analyzing, and reporting on campaign data, • Experience with basic video editing software (e.g., iMovie, Adobe Premiere, or Canva Video) to support storytelling across digital channels, • Experience in arts education, education, or community-based nonprofit settings, preferredSkills & Attributes, • Proficiency with email marketing tools (e.g., HubSpot, Mailchimp, Constant Contact), social media platforms, and content management systems (e.g., WordPress), • Proficiency with multimedia design tools such as Canva and Adobe Creative Suite (e.g., Photoshop, Illustrator, Premiere Pro), • Strong project management and organizational skills; able to balance multiple priorities and deadlines, • Creative, collaborative, and mission-driven, with a deep belief in the power of storytelling and donor engagement, • Strong command of email campaign best practices and optimization, with a curious, forward-thinking approach to staying current on digital trends, new technologies, and continuous learning opportunities (including AI) QI9MqL2Ca6

Job Description Bolton & Menk is now accepting applications for our 2026 summer internship season. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. As a Civil Engineer Intern you will learn practical on-the-job experience serving our municipalities and will spend the majority of your time working with construction phase activities. Internship opportunity is with our Municipal team. What You Will Be Doing: • Assist on civil engineering projects with tasks involving civil engineering, planning and design., • Assists with the preparation of reports, of plans, specifications, and cost estimates., • Assists with construction observation, performing construction staking, performing construction administration duties, • Degree Programs: Selected candidates will be enrolled in a Civil Engineering degree program or closely related program from an accredited post-secondary institution., • Minimum Cumulative GPA: 2.8 GPA; Desired GPA 3.2 or above, • Current Status: Desired is Sophomore or above with completed coursework in general surveying and AutoCAD drafting., • Students must have the ability to work in extended outdoor conditions and be physically capable of navigating rugged terrain for the purpose of performing the construction observation duties. Bolton & Menk will currently not be providing visa sponsorship or Optional Practical Training Extensions for STEM Students. Individuals must be legally authorized to work in the US at the start of employment without a need for current or future visa sponsorship. Relocation and housing are not included. Hourly Range: $18.00 - $24.00/hr depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees Bolton & Menk, Inc. specializes in providing community infrastructure solutions. Since 1949, we have been committed to improving quality of life through engineering excellence and client satisfaction. From advocating for our communities to designing their dreams to finding funding; we take pride in our work because we live in these same communities. Today, Bolton & Menk has more than 1,000 employees throughout more than 35 locations in Minnesota, Iowa, North Dakota, North Carolina, South Carolina, and Colorado providing services to more than 400 communities and agencies. Learn more about our history here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets. Bolton & Menk will currently not be providing visa sponsorship or Optional Practical Training Extensions for STEM Students. Individuals must be legally authorized to work in the US at the start of employment without a need for current or future visa sponsorship.

Job Description Senior Estimator LeJeune Steel Company is focused on becoming the pre-eminent structural steel provider in North America focused on delivering large, complicated and fast-track projects. We are a group of forward-thinking, focused, knowledgeable individuals that are looking to grow our exceptional team. Our Core Promise: To Outdo. We tackle every project with uncompromising tenacity and unmatched mastery, making our customers’ vision a reality. Building the tallest, coolest, never-been-done-before buildings takes courage and strength. You have to be smarter than everyone else. Not just book smart, but hard knocks smart – living it smart. Because the best solutions to the trickiest problems don’t just happen. You get there by tackling the impossible, working around it, designing through it and engineering it into reality. And not just by doing it, But by Outdoing it. Our Values: • Caring and enduring relationships with others, • Honesty and integrity, • Excellence, nothing less, • Enjoying our work, • Safety, health and well-being of all of our employees, • Combining small company abilities with large company advantages What We Are: • Relentless, • Forward-Thinking, • Focused, • Strong A Senior Estimator is a management position responsible for a team of estimators. This position is responsible for the scheduling of their team, the development and growth of each team member, and the quality of the work the team produces. A Senior Estimator reviews and approves the work performed by the team. This position has the authority to send proposals and change estimates at an established threshold, taking complete responsibility for them. A Senior Estimator may also, at times, serve as a sales lead, perform quantity take-offs and proposal assembly as needed; however, their primary focus is the team and quality proposals produced by the team. RESPONSIBILITIES • Lead, schedule, and develop direct reports, • Review work performed by the team to maintain estimate accuracy and proposal quality, • Serve as and assign team “Champions” over an assigned project or topic acting as the subject matter expert, • Assist team with project-specific proposal documents such as schedules and cash flows QUALIFICATIONS • Has well-rounded knowledge of LeJeune Steel estimating practices, financial goals, and company metrics in order to review, approve, and take responsibility for their teams’ estimating activities, • Has a general understanding of the processes required to engineer, detail, fabricate, deliver, and erect a structural steel building and can assess inherent project risk and opportunity with this knowledge, • Structural Steel Project Management experience is a plus, • Comfortable leading others and having direct reports, • Solid written and verbal communication skills with internal and external customers This role can be based out of our Minneapolis, Duluth or Milwaukee offices. The base pay range is $100,000-$140,000 a year depending on job-related knowledge, skills, and experience. This position is eligible for annual bonus and profit sharing based on company performance in addition to other benefits that support the total well-being of you and your family. Some benefits include: • Comprehensive Insurance coverage, Medical, Dental, Vision, and more, • Wellness Program, • 401K with employer match, • Discounted company stock (Employee Stock Purchase Plan), • Profit Sharing, • Generous paid time off, • Growth opportunities through company sponsored leadership development courses and trainings This position is not eligible for sponsorship. All offers of employment are expressly contingent upon the satisfactory completion, in accordance with Company policy, of a pre-employment drug screening and background check. APi Group is committed to complying with all laws prohibiting discrimination in employment and to providing equal employment opportunity to applicants and employees without discrimination on the basis of sex/gender, age, disability, race, color, ethnicity, religion, creed, national origin, military/veteran status, or other protected characteristics as defined by local, state, and federal law. In keeping with this commitment, APi Group will provide reasonable accommodations in the application process to otherwise qualified applicants with a disability. Applicants who wish to request a reasonable accommodation of disability in connection with the application process should contact Total Rewards and People Services at 651-604-2882 or email . All qualified applicants with LeJeune Steel Company will receive consideration for employment without regard to race, color, religion, sex, sexual orientation and gender identity, national origin, or status as a qualified individual with a disability or protected veteran.

Job Description Bolton & Menk has great opportunity for a Design Engineer (EIT) to join our Plymouth or Minneapolis office focusing on site design projects related to schools and school renovations and recreation areas. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. In this role you will have the opportunity to make a difference in local communities on fun & exciting projects including new schools, ballfields (soccer, football, lacrosse, baseball, and softball), tennis courts, running tracks, and school stadiums. You will work with project engineers and managers to complete a wide variety of engineering assignments, including development of construction plans and specifications, stormwater management design, details, and reports, grading plans, utility plans, erosion control and SWPPP plans, details of construction, and project correspondence. This position is open immediately to qualified EIT individuals or those graduating in Dec 2025 or May 2026. What You Will Be Doing: • Plan preparation for a variety of site design projects. Projects can include new schools, additions to existing schools, modifications to parking areas at existing schools, ballfields (soccer, football, lacrosse, baseball, and softball), tennis courts, running tracks, and school stadiums., • Research local codes and ordinances, • Prepare plans to present to clients, • Prepare cost estimates, • Develop plans from inception of the project through the complete construction document process., • Develop stormwater management reports and submit these reports to local review agencies, • Study vehicle movements for each site., • Develop technical specifications under the guidance of a supervisor., • Perform effective technical writing and correspondence, • Bachelor of Science Degree in Civil Engineering from an accredited post-secondary institution and have successfully passed the Fundamentals of Engineering (Engineer Intern) exam. Other requirements include:, • Engineer-In-Training Certification (or ability to receive in 12 months), • Must be capable of working in outdoor conditions and you must be physically capable of navigating rugged terrain for the purpose of performing the construction observation duties., • Must have academic experience or on the job experience with AutoCAD Civil 3D., • Must possess basic MS Office skills including Word and Excel., • Must possess a valid drivers license and your own transportation. You will be reimbursed for business-related travel., • Experience in AutoCAD Civil 3D and ability to develop grading plans Salary Range: $62,000 - $85,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid flexible company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets. Bolton & Menk will currently not be providing visa sponsorship or Optional Practical Training Extensions for STEM Students. Individuals must be legally authorized to work in the US at the start of employment without a need for current or future visa sponsorship.

Job Description ABOUT INSPIRE MEDICAL SYSTEMS Inspire is the first of its kind medical device designed to make a difference in the lives of those living with Obstructive Sleep Apnea (OSA). We are revolutionizing the sleep industry with our FDA-approved medical device, designed to reduce OSA severity for those who cannot tolerate or get consistent benefit from CPAP. Inspire Medical Systems is committed to enhancing patients' lives through sleep innovation. We are steadfast in our commitment to prioritize patient outcomes, act with integrity and lead with respect. With positive persistence at our core, we are committed to all those we serve. WHY JOIN OUR FAST-GROWING TEAM At Inspire, we value people – your diverse experiences, backgrounds, and thoughts. We elevate voices and encourage learning opportunities to build a professional network that grows into community. We embrace a people-first culture by offering excellent benefits, 401k matching, ESPP, flexible time off (FTO), and tuition reimbursement. If you're passionate about making a difference in people's lives and want to work with innovative technology, come be a part of our great team! ESSENTIAL JOB FUNCTIONS We are recruiting for a Reimbursement Manager Mid Central/Texas to join our team. In this provider/customer facing role, you will be instrumental in providing support to optimize Inspire access and minimize reimbursement barriers for patients and providers. You will be building relationships with providers, providers' offices, Ambulatory Surgery Centers, hospital outpatient facilities, as well as other cross functional internal and external stakeholders. You will be working independently in a fast paced, highly visible environment as well as collaboratively with the internal program prior authorization support services and field sales to ensure all customer needs are met supporting patient therapy access and communicating coverage challenges across specific payer channels with guidance on how to navigate and minimize those potential hurdles. You will also actively engage with new accounts for billing and coding training, audit education, and program review support. OPPORTUNITIES YOU WILL HAVE IN THIS ROLE • Be the subject matter expert on coding, coverage, and payment for Medicare and commercial payers and impact patient access through complex problem solving, • Effectively communicate and explain Inspire reimbursement education, support, and resources to customers in multiple sites of service including administrators, • Both proactively and reactively navigate and address individual account and patient access issues that occur by partnering with external and internal stakeholders including internal reimbursement team and field sales colleagues, • Respond to client and internal partner requests for customer site visits, Inspire program business reviews, and reimbursement needs/support, • Establish and maintain customer relationships through reimbursement related engagement and cross-functional partnerships including Sales, Marketing, Medical Education, and Legal and Compliance, etc., • Execute on access and reimbursement strategic priorities, working with business partners to identify and prioritize key accounts for alignment of reimbursement support to achieve goals, • Collaborate in the development of reimbursement presentations for site visits, trainings, client presentations and other meetings as appropriate, • Keep abreast of ever-changing market dynamics and industry trends Inspire related impacts regarding to CMS and commercial payers, • Work in a fast-paced environment and manage additional related responsibilities based on organizational needs Required: • Bachelor's degree in business, science or healthcare administration required, • 5+ years of experience in reimbursement/market access and/or Successful experience working with complex insurance payer claims, denials, and appeals (Medicare and commercial), • Demonstrated knowledge in coding, coverage, and payment for implantable medical devices across the healthcare landscape including HCPs, ASCs, hospitals, • Experience engaging directly with HCPs in multiple sites of service and in group educational settings, • Excellent communication and in person and virtual presentation skills to interface with customers, cross-functional partners, and internal reimbursement and prior authorization partners, • Independent and team-oriented problem solving and diligent self-motivated follow up, • Direct experience collaborating with multiple internal and external stakeholders and managing project, • Implantable medical device experience, • Experience with Neurology products, • Coding certification (CPC, COC) #LI-Remote The salary for this position will be offered at a level consistent with the experience and qualifications of the candidate. This information reflects the anticipated salary range for this position at the time of posting. The salary range may be modified in the future and actual compensation may vary from the posting based on various factors such as geographic location, work experience, education and/or skill level. Salary$179,000—$268,000 USD BENEFITS AND OTHER COMPENSATION Inspire offers a highly competitive benefits package including (general description of the benefits and other compensation offered): • Multiple health insurance plan options., • Employer contributions to Health Savings Account., • Dental, Vision, Life and Disability benefits., • 401k plan + employer match., • Identity Protection., • Flexible time off., • Tuition Reimbursement., • Employee Assistance program., • All employees have the opportunity to participate in the ownership and success of Inspire. Employees at all levels can participate through equity awards and the Employee Stock Purchase Program. Inspire Medical Systems provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, creed, sex, national origin, age, disability, marital status, familial status, sexual orientation, status regarding public assistance, membership or activity in a local commission, military or veteran status, genetic information, pregnancy or childbirth, or any other status protected by applicable federal, state, and local laws. This policy applies to all aspects of the employment relationship, including recruitment, hiring, compensation, promotion, transfer, disciplinary action, layoff, return from layoff, training, and social and recreational programs. Inspire Medical Systems complies with applicable laws governing non-discrimination in employment in every location in which Inspire Medical Systems has facilities. All such employment decisions will be made without unlawfully discriminating on any prohibited basis. Inspire Medical Systems is an equal opportunity employer with recruitment efforts focused on ensuring a diverse workforce. Applicants with a disability that need accommodation to complete the Inspire Medical Systems application process should contact Human Resources at 844-672-4357 or email careers@inspiresleep(dot)com Inspire Medical Systems participates in E-Verify.

Job Description Bolton & Menk has an exciting opportunity for a Project Engineer, PE to join our Heavy Civil Structural team in our Oakdale or Minneapolis office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. We are looking to add a Project Engineer, PE who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! What You Will Be Doing: • Responsible for the management planning, scheduling and performance of multiple engineering projects and personnel, both design and construction. Project may include municipal facilities, trenchless and tunneling, structural evaluations and rehabilitation projects., • Perform field site evaluations and provide support during construction, • Review and/or prepare preliminary reports and feasibility studies, • Read and interpret engineering plans, specifications and reports, • Provides technical advice regarding design, construction or modification and repairs to clients, contractors and other staff members, • May assist with business development activities (client needs, research, proposals, etc.), • Bachelor's degree in Civil Engineering from an accredited college or university, • Licensed Professional Engineer in the State of Minnesota, • 4+ years' progressive experience in the civil engineering field, including experience working with municipal infrastructure preferred, • Experience in plan and specification development with construction contract administration, • AutoCAD Civil 3D proficiency, • Knowledge of MnDOT requirements Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant’s education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant’s sex or other status protected by local, state, and/or federal law. Supporting Our Employees There’s life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: • Competitive compensation plan - overtime compensation available to most employees, • Discretionary bonuses available to most employees, • ESOP - Employee ownership (ESOP); 100% company-paid contributions, • 401(k) Match Program, • Paid time off (PTO), • Volunteer Time Off (VTO), • Six paid company holidays, • Two floating personal holidays for events that are important in your life, • Tuition reimbursement, • Parental leave, • Short term and Long-term disability, • Dependent care reimbursement, • Employee assistance program, • Health insurance, • Flexible spending account, • Life insurance Bolton & Menk, Inc. specializes in providing community infrastructure solutions. Since 1949, we have been committed to improving quality of life through engineering excellence and client satisfaction. From advocating for our communities to designing their dreams to finding funding; we take pride in our work because we live in these same communities. Today, Bolton & Menk has more than 1,000 employees throughout more than 35 locations in Minnesota, Iowa, North Dakota, North Carolina, South Carolina, and Colorado providing services to more than 400 communities and agencies. Learn more about our history here: OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets.

Job Description POSITION SPECIFICATION Position: Senior Mechanical Engineer Department: Utilities & Central Energy (UCE) Reporting Relationship: Senior Project Manager, UCE COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . The Utilities and Central Energy (UCE) group specializes in large central plant work, particularly for district energy serving cities, universities, hospitals, and manufacturing campuses. Our expertise covers both energy production and distribution. We have expertise in sustainable energy production, simple and combined cycle, combined heat and power, industrial HVAC, and medium voltage power. Our clients look for us to lead large complex projects from concept to completion, including startup, check-out, and commissioning. POSITION OVERVIEW & RESPONSIBILITIES The Senior Mechanical Engineer - UCE plays a key role in the successful execution of projects. This individual will provide technical and engineering excellence, as well as successful delivery of work to our customers. Specific responsibilities will include, but not be limited to, the following: • Prepares engineering documents and equipment specifications to meet contracted scope of work and to ensure code compliance., • Performs engineering calculations., • Approves final utilities systems/equipment selections and drawing submittals., • Leads utilities systems/equipment procurement efforts., • Manages projects and teams, ensuring that work efforts and costs are accurately scoped and estimated., • Actively manages assigned projects, driving them to completion., • Thorough understanding of Architectural design, Electrical, Civil and Structural Engineering and construction practices., • Provides work direction to other team members, including subconsultants, as assigned., • Participates in the development and coaching of younger talent needed to meet current and future organization goals., • Provides technical and engineering support to other departments/disciplines., • May represent KFI at conferences, customer events, and through membership in industry associations. QUALIFICATIONS Required • Bachelor’s degree in Mechanical Engineering., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Professional Engineering registration or willingness to pursue this designation., • 10+ years of professional engineering experience., • Demonstrated strong proficiency in utilities generation and distribution systems design., • Strong interpersonal skills to enable effective interaction with Designers, Engineers, and sub-consultants., • Ability to establish rapport and credibility with customers and other stakeholders., • Project management skills and knowledge of related tools and processes., • Ability to assimilate a range of ideas, programs, or alternatives into a set of recommendations., • Self-directed and thrives in an environment where consultation leads to superior outcomes., • Knowledge of computer technology and specific areas of application, including MS Office., • Experience generating technical reports and developing campus utilities masterplans., • Strong interpersonal skills and ability to collaborate with others., • Excellent verbal and written communication skills., • Effective meeting management skills., • Cost estimating skills., • Some work locations will feature the tough terrain typical of construction sites or require lifting or moving field testing equipment. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job DescriptionCompany Description When it comes to being wild, we know a thing or two. We’re not afraid of trying something new or the hard work it takes to make it happen. It’s in our DNA. We’ve turned a family recipe into a new snacking category. And the wilderness into the world’s largest meat snack business, that’s still proudly family owned and operated. We’re a company built by innovators, and are driven to not only satisfy your hunger, but to also feed your journey – whether that journey is on the road, on the run, at the campground, at the playground, in the office or in the moment. It’s a journey we share with you. It’s the journey forward of our people, of our communities, of our category…with a reverence for quality and an irreverence for the status quo. At Jack Link’s Protein Snacks, we see every moment of every day as an opportunity to move forward, to forge new ground. To realize our vision of becoming the World’s #1 Protein Snack Company. We never give up. You never give up. Together, we keep going. Are you wild enough to join us? Jack Link’s Protein Snacks is a global leader in snacking and the No. 1 meat snack manufacturer worldwide. Family-owned and operated with headquarters in Minong, Wisconsin, Jack Link’s Protein Snacks also has a large corporate hub in Downtown Minneapolis, Minnesota. The company is made up of over 4,000 passionate team members, across 11 countries, who share an uncompromising commitment to delivering awesome products and feeding the journey of those who move things forward. The Jack Link’s Protein Snacks portfolio of brands includes, Jack Link’s, Lorissa’s Kitchen, MATADOR Jerky, BiFi and Peperami. Job Description The Senior R&D Manager is responsible for leading the development and optimization of new and existing food products, processes, and technologies. This role ensures that all projects align with company objectives for innovation, quality, safety, and regulatory compliance. The Senior R&D Manager collaborates cross-functionally with Marketing, Operations, Quality Assurance, and Supply Chain to deliver commercially viable solutions that meet consumer needs and business goals. This individual is also responsible for developing, implementing and monitoring standard work, process improvements and mentoring / coaching food scientists. DIRECT REPORTS The duties and responsibilities of this position shall consist of, but not be limited to, the following: • Product Development: (30%), • Lead the creation, formulation, and testing of new food products from concept to commercialization., • Optimize existing product lines for cost, quality, and sustainability., • Project Management: (30%), • Manage multiple R&D projects, ensuring timelines, budgets, and deliverables are met., • Maintain accurate documentation of formulations, processes, and specifications., • Team Development: (30%), • Mentor and develop R&D staff, fostering a culture of innovation and continuous improvement., • Strategic planning as a member of the R&D leadership team (10%), • Technical Leadership:, • Provide technical expertise in food science, ingredient functionality, and processing technologies., • Stay current on industry trends, emerging technologies, and regulatory changes., • Cross-Functional Collaboration:, • Partner with Marketing to translate consumer insights into product concepts., • Work with Operations and Supply Chain to ensure scalability and manufacturability., • Compliance & Quality: PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an Team Member to be successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Team Member is regularly required to sit, use hands and fingers, handle, or feel and talk or hear. The Team Member is occasionally required to stand, walk, and reach with hands and arms. The Team Member must occasionally lift and/or more up to 25 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those a Team Member encounters while performing the essential functions of this job. The work environment is a plant/office setting with varying degrees of temperatures and noise levels. Exposure to manufacturing equipment movement and wet/slippery floors. However, the vast amount of work is conducted in a climate-controlled office. Travel may be required. Qualifications Required Education: • 8 + years of experience leading, developing and coaching a team, • Demonstrated managing people (direct report), • Demonstrated experience with meat development, • Experience with a variety of R&D Management tools including hardware, software., • Working knowledge of food manufacturing at scale, • Demonstrated understanding of R&D experiment designs, • Experience with R&D data platforms, digital tools, and emerging technologies, • Proven track record of leading innovation initiatives and digital transformation within R&D environments • Retail (CPG) product development experience REQUIRED SKILLS, KNOWLEDGE AND ABILITIES • Self-motivated, hands-on and results oriented, • Must be able to collaborate effectively with various manufacturing, marketing, sales and other functional teams, • Must be flexible and able to work well in a team environment, • Comfortable in a fast paced, changing environment, • Excellent verbal and written communication skills; must work effectively with all levels of management and Team Members, • Must demonstrate effective leadership, problem solving, project management, presentation, and employee motivational skills., • Proficient in Internet navigation, Microsoft Word, Excel, PowerPoint, and Outlook. Additional Information The salary range for this role is $150,000 – $180,000(Annually). Actual salaries will vary based on several factors, including but not limited to external market data, internal equity, location, and candidate skill set and experience. Base pay is just one component of Jack Link’s Total Rewards package for Team Members. Other rewards may include annual incentive and program-specific awards. Jack Link’s provides a variety of benefits to eligible Team Members, including medical, dental and vision benefits, life and disability insurance, 401k participation, paid holidays, and paid time off. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER: Jack Link’s provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic that is protected by federal, state or local law. E-VERIFY: Jack Link’s is participant in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For information about the E-Verify program, please visit: All your information will be kept confidential according to EEO guidelines.

Job Description At Minnesota Cannabis Services, we're not just building businesses — we're building the people who make them great. Our team partners with leading operators across cultivation, manufacturing, distribution, and retail to deliver world-class expertise in legal, finance, analytics, marketing, HR, and technology. We're looking for professionals who take pride in their work, move with purpose, and thrive in fast-changing environments. The kind of people who hold themselves to high standards, think creatively, and find satisfaction in solving hard problems. When you join our team, you'll work alongside some of the most experienced leaders in the industry — professionals who share their knowledge freely and lead by example. You'll be challenged, supported, and trusted to take ownership of meaningful work that shapes the future of one of the fastest-growing industries in America. Vice President of Human Resources Location: 100% On-Site | Corporate Headquarters in Edina, MN Compensation: $200,000–$300,000 base salary + comprehensive benefits and paid time off Reports to: Chief Executive Officer and Executive Leadership Team About the Company We are a high-growth corporate services firm providing workforce, HR, and operational consulting to over 50 cannabis retail locations and several manufacturing and transportation and delivery companies across multiple states. Our group manages complex organizational scale on behalf of our partners, offering best-in-class staffing solutions, compliance oversight, and performance systems that enable operational excellence at every level. About the Role The Vice President of Human Resources (VPHR) will lead the full spectrum of people strategy for the organization on behalf of our clients — encompassing Talent Acquisition, Human Resources, Workforce Planning, People Analytics, and Learning & Development. This role is designed for a strategic builder and data-driven operator who thrives in an extremely fast-paced, multi-entity environment. You will oversee the infrastructure that powers workforce scalability, cultural alignment, and leadership development across dozens of client organizations. You will work directly with the C-suite to ensure that people operations are tightly integrated with business performance, growth forecasting, and compliance frameworks. Key Responsibilities1. Talent Acquisition & Workforce Planning • Lead all recruiting, workforce forecasting, and staffing pipelines across corporate, retail, and field operations., • Implement advanced analytics and systems integrations within Greenhouse ATS and Wurk HRIS platforms to enable real-time visibility into hiring metrics and capacity planning., • Collaborate with Finance and Operations to forecast hiring needs based on store openings, client expansion, and seasonal trends., • Build scalable recruiting playbooks, interview frameworks, and training for the internal TA team to drive quality and speed of hire. 2. Human Resources & Compliance • Oversee all HR operations — including payroll, benefits, employee relations, and compliance — across multiple states and business units., • Create standardized HR policies, procedures, and reporting to support organizational consistency and risk management., • Lead employee engagement, performance calibration, and total rewards strategy to ensure alignment with company goals and financial health., • Drive operational excellence through automation, accuracy, and policy adherence. 3. People Analytics & Systems • Build a data-driven People Operations infrastructure that connects HRIS, ATS, and finance data into a unified reporting system., • Design and maintain dashboards tracking metrics such as headcount growth, turnover trends, time-to-fill, cost per hire, and engagement indicators., • Use predictive analytics to identify talent risks and inform decision-making across leadership teams., • Introduce KPIs that measure workforce productivity, leadership effectiveness, and organizational health. 4. Learning, Development & Organizational Growth • Develop a scalable, tiered learning system that supports employee onboarding, compliance training, leadership development, and cross-department skill growth., • Partner with operational leaders to embed L&D initiatives into each function's strategic roadmap., • Design programs that identify and develop high-potential talent for future leadership roles., • Oversee implementation of company-wide training platforms and content libraries. 5. Leadership, Culture & Strategy • Serve as a trusted advisor to the C-suite on organizational structure, succession planning, and workforce strategy., • Champion a culture of accountability, growth, and excellence across all levels of the company., • Facilitate communication and collaboration across divisions, ensuring transparency and alignment between field teams and headquarters., • Build a People Operations team known for innovation, responsiveness, and reliability. Ideal Candidate Profile You are a sophisticated, systems-minded people leader who has scaled organizations through operational clarity and human capital excellence. You bring a strong command of analytics, structure, and executive influence. Qualifications: • 10–15+ years of progressive HR and Talent leadership, with at least 5 years in a senior or executive capacity., • Proven success leading TA, HR, and L&D under one cohesive strategy., • Experience with multi-state or multi-entity operations (retail, consumer, hospitality or manufacturing industries preferred)., • Deep familiarity with ATS/HRIS platforms (Greenhouse, Wurk, Sage or comparable systems)., • Strong business acumen — able to tie people strategy directly to growth, profitability, and compliance outcomes., • Exceptional communication and leadership presence. Performance Outcomes • Accelerated hiring velocity with measurable improvement in quality of hire., • Enhanced retention and engagement across client organizations., • Real-time people analytics dashboard deployed within the first three months., • Fully operational training and development framework within the first six months., • Increased organizational efficiency and leadership readiness through scalable people systems. Why Join Us This is a defining executive opportunity to shape the people strategy for a national portfolio of emerging and mature companies. As Vice President of Human Resources, you will design the systems, culture, and leadership architecture that will define the next decade of growth — working alongside a high-performing executive team that values innovation, data, and operational excellence. At Minnesota Cannabis Services, we believe great teams are built on trust, initiative, and follow-through. We invest deeply in our people — providing mentorship, on-the-job training, and opportunities for advancement across multiple sectors of the cannabis industry. Here, you'll be part of a high-performing culture that values precision, reliability, and continuous improvement. Every project is a chance to grow your skills, strengthen your leadership, and contribute to something that matters. If you're driven, resourceful, and ready to make an impact, we want you on our team. Apply today and take the next step in your career with Minnesota Cannabis Services.

Job Description POSITION SPECIFICATION Position: Mechanical Designer I Department: Utilities & Central Energy (UCE) Reporting Relationship: Lead Designer, UCE COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . POSITION OVERVIEW & RESPONSIBILITIES The Mechanical Designer I plays a key role in the successful execution of projects, focusing primarily on the production of AutoCAD Plant 3D and Revit drawings and laying a strong foundation for understanding mechanical design fundamentals. As an entry-level position, the Mechanical Designer – Level I is responsible for producing quality construction documents and coordinating design work with other engineering disciplines. This role will involve working on various aspects of mechanical design, including HVAC, piping, and plumbing systems, while developing essential skills in CAD software and project execution. The successful candidate is expected to work within a team environment, collaborating effectively with other project team members to achieve project objectives. Specific responsibilities will include, but not be limited to, the following: • Layout and design mechanical systems for assigned projects, including HVAC, piping, and plumbing systems., • Prepare General Arrangement Drawings, P&IDs (Piping and Instrumentation Diagrams), and construction documents., • Create 3D models and piping isometric drawings., • Perform redlines using AutoCAD and Revit independently., • Create schematic-level mechanical room equipment layouts (with guidance)., • Maintain consistent work quality across all projects., • Perform accurate design calculations and measurements., • Coordinate project design with other engineering disciplines., • Collaborate with others as a CAD and design resource and provide training and support to team members when assigned., • Participate in Smart 3D Design projects under supervision., • Size and select components for mechanical systems., • Conduct basic duct and pipe sizing for air and water systems., • Identify various valve types for mechanical systems., • Conduct construction observations., • Assist with field surveys under supervision., • Support project execution by assisting with filing, printing, and other administrative tasks., • Engage in on-the-job training to develop skills in QA self-checks, design standards, and project execution basics., • Other duties as assigned. QUALIFICATIONS Required • An AAS Degree in Mechanical Design/Drafting or equivalent work experience., • 0-4 years of work experience in mechanical design or related field., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Internship and/or working experience in central boiler and/or chiller plants and/or one or more of the following:, • Agribusiness process plants, • Facility manufacturing, • Food Manufacturing / Clean Systems, • Underground tunnel distribution systems, • Mechanical equipment / skid design., • Experience in AutoCAD and/or Revit., • Capable of operating with minimal supervision, • Excellent verbal and written communication skills., • Strong interpersonal skills and ability to collaborate with others., • Customer service orientation to achieve a high level of customer satisfaction (internal and external) for services provided., • Represent the company in a professional matter., • Field experience is desirable., • Experience in a consulting and/or construction capacity., • Experience with 3D modeling software, particularly AutoCAD Plant 3D., • Some work locations will feature the tough terrain typical of construction sites or require lifting or moving field testing equipment. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: • Health, dental and vision insurance coverage, • Virtual health services, • Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions, • Flexible Spending Account, • 401(k) plan, • Short-term and long-term disability insurance, life and AD&D insurance, • Employee Assistance Program, • Paid Time Off to include Earned Sick and Safe Time in accordance with state laws, • Paid Volunteer Time Off, • Company Paid Holidays, • Tuition Reimbursement, • Bereavement Leave Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer – Veterans and Disabilities

Job Description POSITION SPECIFICATIONS Position: Mechanical Designer Intern Department: Utilities & Central Energy (UCE) Start Date: Summer Term 2026 COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit . THE OPPORTUNITY At KFI, we see Interns as a valuable investment in our future. Our Intern program offers you the opportunity to learn our business, gain exposure to various projects and industry sectors, and enhance your design skills. Intern Program Benefits • Hands-on, real-world experience in the consulting engineering industry, • Work with impactful projects, • Learning opportunities through mentorship, • Network with leading experts in the industry. RESPONSIBILITIES Specific responsibilities will include, but not be limited to, the following: • Clean-up 2D drawing markups in AutoCAD., • Model 3D structural, piping, electrical, and equipment elements used in design., • Draft hand sketches into CAD drawings., • Engage with other designers to learn drafting and project-related details and ask questions., • Provide office/project support (plotting, scanning, document preparation)., • Develop schedule to manage workload across assigned activities to achieve deadlines., • Other duties as assigned. QUALIFICATIONS Required • Pursuing a two-year drafting degree/AAS degree or similar area of study., • Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future., • Demonstrated proficiency with computer technology, including MS Office applications., • Excellent verbal and written communication skills., • Excellent analytical and problem-solving skills, with strong attention to detail., • Effective time management and organizational abilities., • Ability to work effectively both independently and collaboratively, adapting quickly to shifting priorities and workload demands., • Consistently demonstrate professional engineering ethics and adhere to company policies and procedures., • Ability and willingness to travel if needed. Preferred • Completed at least two years of relevant college coursework., • Completed coursework and/or practical knowledge in power systems engineering, including power distribution, lighting, and low voltage systems., • Working knowledge of engineering design software (e.g., AutoCAD, Revit)., • Interest in building systems, construction environments, and/or commercial HVAC., • Comfortable working in both office and construction site settings. Working Conditions • Occasionally, some work locations will feature the tough terrain typical of construction sites or require lifting or moving field testing equipment. PREVIOUS STUDENT PROJECTS • Developed interactive Power BI dashboards with custom CAD-based maps for building conversions analysis, enabling scenario planning, capital and energy forecasting, emissions tracking, and phased infrastructure management., • Analyzed heat loads in MCC rooms to assess cooling system design and efficiency and identify improvement opportunities., • Designed and executed a long-range Utility Study involving project planning, analysis and customer recommendations., • Conducted an energy modeling study for a new high school and a large shopping mall., • Performed HVAC assessment and commissioning services across diverse facilities, including clinics, power plants, and educational buildings., • Identified HVAC inefficiencies using utility data analysis and recommended energy-saving recommissioning strategies., • Analyzed ground-source head pump system performance., • Developed engineering calculation tools to improve efficiency and accuracy. CORE BEHAVIORS Accountable • Demonstrates persistence in the achievement of goals., • Acts with a sense of urgency., • Demonstrates agility, adapts well to changes., • Works well under pressure., • Plans projects well, managing last-minute rushes and disruptions., • Balances Speed and Quality., • Looks for improvement in our delivery, tools and processes., • Keeps others adequately informed., • Exhibits objectivity and openness to others' views., • Balances team and individual responsibilities., • Shares expertise with others., • Inspires respect and trust. Compensation: $23.00 per hour. The final agreed upon compensation is based on individual qualifications, experience, work location, and education. This position will earn ESST (Earned Sick and Safe Time) in accordance with state and local law. Please note this job description is not designed to cover a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. KFI Engineers is an EOE including veterans and disability.

Job DescriptionBIGOS MANAGEMENT IS PROUD TO BE NAMED A STAR TRIBUNE TOP WORKPLACE IN 2025 FOR THE 11th TIME LOCATION Golden Valley, Minnesota (hybrid work option available, must be based locally) SCHEDULE This is a temporary position, 40 hours a week, from February 2026 - August 2026. Monday - Friday: 9:00 - 5:30pm 1 - 2 Saturdays a month (receive Friday off those weeks) SUMMARY Hiring Pay Range: $23.00 - $28.00/hour The Inside Sales Representative will engage with prospects via e-mail, SMS, and phone to identify available Bigos Management properties that will work best for the client and convince prospects to tour properties, while providing an exceptional client experience. The Inside Sales Representative is expected to function effectively with minimal direct supervision. Supports our employee-first culture and exemplifies our core values of relationships, development, quality, and responsibility. To perform this job successfully, an individual must be able to perform each duty satisfactorily. The requirements listed below are representative of the knowledge, skill and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. The hiring pay range and list of benefits that are posted are an estimate and not designed to cover a complete listing of all aspects of the position. Reach out to Human Resources with any questions (). ESSENTIAL JOB DUTIES • Respond to all e-mail and internet leads immediately through prospects preferred communication channel (outbound call, online chat, text, or email) and qualify the prospects based on needs, • Inform the prospect on the advantages of renting from Bigos Management, • Maintain working knowledge of the competition in the area, • Communicate effectively with prospects to determine the best available apartment communities and floor plans to meet their needs, and cross-sell when appropriate, • Consistently follow steps of service in following up with prospects with the goal of setting showing appointments with property Leasing Consultants, • Work collaboratively with the site teams to foster a strong partnership with Leasing Consultants and Property Managers, • Effectively utilize lead-management, project management, and supplemental software Education and Experience: • High school diploma or GED required, • Two years of sales and/or marketing experience, preferably in the multi-family housing or hospitality industry, • Fluent in English and skilled in oral and written communication, • Customer-focused and personable, • Organizational, planning and time management skills, • Maintain focus and productivity with minimal direct supervision, • Detail-oriented, with strong work prioritization and organizational skills, • Ability to learn, adapt, and utilize new technologies Must possess mobility to work in a home office or corporate office setting and to use standard office equipment, including a computer; stamina to maintain attention to detail despite interruptions; strength to lift and carry items weighing up to 10 pounds; vision to read printed material and a computer screen; and hearing and speech to communicate in-person and over the telephone. If elected, home office must have access to a dedicated internet connection and space to securely handle sensitive information. Personal Protective Equipment: None Work Environment: Office working conditions, hybrid work model

Job Description Build what comes next in education. Child Trends is seeking an entrepreneurial, service-oriented leader to guide our Education program into its next phase of growth and impact. This is not a role for someone who wants to be told what to do or check boxes to follow. It is a role for someone excited to design and lead high data and research into practical guidance that supports educators, systems leaders, and policymakers in addressing some of the most important and urgent questions in education today. If you are driven by outcomes for young people, energized by change and the opportunities within ambiguity, and motivated to lead by enabling others, removing barriers, and supporting teams to do their best work, this role is for you. The Role This position is for a Program Area Director to lead a passionate group of education-focused scientists, technical assistance specialists, research analysts, and assistants in conducting research, evaluations, and technical assistance work, and in communicating findings to improve the lives and prospects of children and youth across the country. Who Should Apply This role is especially well-suited for someone who: • Believes research should drive real-world education decisions and measurable outcomes, • Has a track record of shaping, securing support for, and leading education research, evaluation and technical assistance efforts that influence policy, practice, and systems improvement, • Brings strong mixed methods methodological expertise, particularly quantitative fluency (or deep working knowledge), • Values participatory approaches that elevate student, educator, and community perspectives in research, technical assistance, and decision making, • Leads by coaching, developing, and empowering teams and fostering shared accountability, • Has on-the-ground experience improving schools, districts, agencies, or education systems, • Is excited by innovation, including the potential of AI in research and schools This position reports to the vice president overseeing education research. How You’ll Spend Your Time (Typical) • ~60% leading current projects, overseeing all aspects of major research, evaluation, or technical assistance initiatives, • ~25% developing and securing funding for new projects through funder cultivation, proposal development, and partnership building, • Demonstrated ability to deliver results in education systems, including influencing policy, practice, or implementation decisions, • Demonstrated ability to effectively lead teams, • Extensive experience leading and developing multidisciplinary teams, including researchers, analysts, and technical assistance providers, • Deep research and evaluation expertise, with substantial experience designing and overseeing rigorous mixed-methods studies and applied evaluations, • Success originating, developing, and securing and securing multi-year, multi-million-dollar grants and contracts from philanthropic organizations, the federal government, and state agencies, • Experience with federal and state contracting, including compliance, deliverables, and partner coordination, • Demonstrated field thought leadership in content or methodological area, • Strong understanding of the U.S. education system and policy landscape across federal, state, and local levels, • Demonstrated strength in research translation and strategic communication with a track record of producing products that make evidence accessible and actionable for decision makers, • Strong or growing visibility in the education policy or education research with a strong professional network of researchers and public officials and frequent opportunities for public speaking in research and policy forums, • Come with relationships or be unafraid to build them?, • PhD or equivalent expertise gained through professional experience, • A respected national platform and trusted voice, • Significant flexibility and autonomy, • A collaborative, mission-driven culture Please apply through the link provided. Submit one combined document including: • Resume, • Cover letter, • Authored thought leadership piece on an education topic, such as a blog or op-ed, report, or presentation Locations: Flexible Remote Work; Child Trends’ offices are based in Rockville, MD; Chapel Hill, NC; Minneapolis, MN. Many Child Trends staff work remotely, and while we are set up to hire remote staff in many states, we are not yet operating everywhere in the US and do not have any overseas operations. We are currently approved to hire full-time staff in AK, AL, AZ, CA, CO, CT, DC, DE, FL, GA, IL, IN, MA, MD, ME, MI, MN, MO, MT, NC, NH, NJ, NM, NY, OK, OR, PA, TN, TX, VA, WI, and WV. The organization will require time to assess additional set up requirements (e.g., employment and tax law) for locations outside of areas where we are currently approved to hire. Individuals who would like to work from areas outside of the currently approved states, if offered the position, should indicate this preference as early as possible in the application process. Benefits: For all full-time and part-time employees who work a minimum of 20 hours per week, we offer generous vacation + sick leave + paid holidays; optional individual/domestic partner/family medical, dental and vision benefits effective first day of employment; optional pet benefits; pre-tax reimbursement funds (FSA, HSA, Commuter); life insurance; short/long term disability, basic life and AD&D coverage paid for by Child Trends; paid family leave; paid bereavement leave; professional development and tuition reimbursement allowance; and 403(b) retirement plan with immediate vesting and Child Trends contributions after 1 year of employment. Child Trends is a nonprofit, nonpartisan research center headquartered in Rockville, MD with more than 200 staff in over 28 states that provides valuable information and insights on the well-being of children, youth, and their families. For more than 40 years, policymakers, funders, educators, and service providers in the U.S. have relied on our data and analyses to make better decisions and policies on programs serving children, families, and youth. . Child Trends is an Equal Opportunity and Affirmative Action Employer. Protected veterans and individuals with disabilities are encouraged to apply.

Job DescriptionDescription: Mur-chol-uh-jee | The science of company merch; the skill of creating and delivering custom-branded apparel and corporate gifts around the world. Merchology is a leading eCommerce retailer in B2B sales of co-branded merchandise including apparel, headwear, drinkware, gifts, and accessories. We are family-owned, people-powered, and we are adding to our #MerchFam at our HQ in Plymouth, MN. Come see why we are a three-time Star Tribune Top Workplaces award winner! Merchology seeks a Learning and Development Specialist to join the People team. Reporting to the VP of People, the Learning and Development Specialist is a critical role responsible for company-wide training strategy, curriculum design, and delivery of learning programs that enhance employee skills, engagement, and performance. This role oversees onboarding, ongoing development, documentation, and knowledge management across all departments. As a key member of the People Team, this position also supports core HR generalist activities including employee relations support, benefits education, compliance initiatives, and People Team projects. A successful Learning and Development Specialist will: • Lead the design, development, and delivery of scalable training programs that support all functions of the organization, including onboarding, systems training, professional skills, leadership development, and company processes., • Update and create training content from scratch, including presentations, facilitator guides, eLearning modules, videos, job aids, and assessments., • Maintain a consistent and engaging new-hire onboarding experience; manage onboarding schedules, tools, and tracking., • Partner with department leaders to conduct training needs assessments and identify skill gaps across the organization., • Evaluate the effectiveness of training programs using metrics, feedback, and performance outcomes; implement continual improvements., • Ensure training materials stay up to date with business processes, system enhancements, and organizational priorities., • Support and administer the Learning Management System (LMS) within Paylocity (Merchology’s HRIS), including course setup, assignments, reporting, and compliance tracking., • Provide coaching, guidance, and support to leaders and SMEs who deliver or develop training content., • Serve as a resource for employees and managers with questions about benefits and HR policies; assist in benefits education during onboarding and throughout the year., • Support employee engagement initiatives, culture programs, and company events., • Assist with HR compliance initiatives such as policy updates, training requirements, and documentation practices., • Participate in employee relations intake or research., • Help maintain accurate employee documentation and HRIS data as needed., • Collaborate with the People Team on DEI, wellness, communication, and recognition programs. Requirements:, • Bachelor’s degree or equivalent experience, • 3+ years’ experience in learning & development, training, HR, or a related field., • Demonstrated ability to design training from scratch (not just deliver)., • Experience facilitating training for groups of all sizes and levels., • Comfortable analyzing training effectiveness and using data to recommend improvements., • Strong proficiency in Microsoft Office products, especially Power Point and Excel., • Strong proficiency in an LMS within an HRIS (e.g., Paylocity)., • Excellent communication (written and verbal) and presentation skills., • Ability to build relationships across departments and influence without authority., • Strong organization, project management, and documentation skills., • Able to multitask in a fast-paced, team environment. Must be capable of effectively managing and prioritizing individual projects, deadlines, and tasks., • Experience with eLearning tools (e.g., Articulate, Canva, Loom), and preferred collaboration tools., • Preferred knowledge of creation of custom learning module GPT tools. WHAT WE OFFER In addition to an outstanding creative culture, authentically nice people, and interesting work, we have: • Competitive compensation: the estimated range for On-Target Earnings in this role is $68,000 to $75,000. On-Target Earnings consist of a combination of annual base pay and a variable target based on sales quota achievement, • Generous PTO (18 days per year), • 8 company-paid holidays, • Hybrid work schedule for select departments, • 40 hours of paid volunteer time, • 401(k) with match, • Medical and dental insurance options, spending account options, including an HSA with employer match, • Company-paid life insurance, • Company-sponsored social events, • Premium brand partner discounts, • Employee-led events that include recognition, wellness, volunteering and DE&I LOCATION • 3000 Niagara Lane North, Plymouth, MN 55447, • Remote hybrid role: Two at-home days and three onsite days, with Wednesday required (following completion of training period) INDUSTRY • Business to Business E-commerce and Apparel Merchology is an equal opportunity employer and Disability-owned Business Enterprise. We celebrate diversity and are committed to a workplace where personal and professional growth are achieved through inclusion. If you require disability resources to submit your application, please email for assistance.