Trade jobs in Norfolk, Virginia - Page 6Create job alerts

Fire Pump & Air Compressor Mechanic Specialist Position Summary: Colonna's Shipyard is seeking a Fire Pump & Air Compressor Mechanic Specialist for our Shipyard in Norfolk, VA. The position is located onsite in Norfolk, VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties & Responsibilities: Key responsibilities include: • Troubleshoot and repair air compressors, fire pumps, and generators., • Regularly working with variable frequency drives, three phase motors, and ladder logic., • Perform corrective and preventative maintenance on generators and other equipment., • Trace and locate defects and causes of mechanical problems using a wide range of diagnostic and test equipment. Determine the type and extent of necessary repairs., • Fit and install to appropriate tolerances such as pistons, valves, bearings, gears, and cylinders., • Make changes or modifications in accordance with specifications and guidelines., • Connect, align, adjust system elements to assure proper operation of the complete system or vehicle Field repairs as necessary., • Install, repair, maintain, test, and adjust fixed and semi-fixed industrial equipment and machinery such as cranes, pumps, engines, motors, pneumatic tools, conveyor systems, and production machinery., • Complete repairs from blueprints, diagrams, operational manuals, manufacturer's specifications, work orders, and other specifications., • Disassemble equipment using hoists, cranes, hand tools, and power tools., • Determine nature of repair and examines parts to detect imperfections with the use of rulers, micrometers, and other measuring instruments to determine changes in dimensional requirements., • Complete repairs by replacing, reworking, or refinishing worn or damaged parts., • Reassemble equipment and test performance of equipment., • Operation of equipment, preventative maintenance, diagnostic and repair work, and overhaul of minor and major building/utility systems and component., • Maintain a safe and clean working environment by complying with procedures, rules, and regulations., • Apply basic math, reading and communication skills., • Must have at least five (5) years of experience in maintaining and repairing electrical and mechanical equipment systems., • Must have at least five (5) years of mechanical experience with industrial air compressors, generators, and fire pump smart systems., • Must be able to work and coordinate with department mechanics assigned during the installation and maintenance of all systems and equipment., • Must have expert knowledge of mechanical, hydraulic and pneumatic system., • Must be able to interpret technical drawings, mechanical and electrohydraulic, • Must be able to identify and resolve the failures of the hydraulic systems, pump adjustments, hoses identification, hydraulic modifications, etc..., • Must have knowledge of and ability to use hand tools and instruments associated with trade., • Must be able to work effectively with others., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Here at Global - a 1st Flagship Company (), a woman-owned small business, we are committed to Individual Accountability, Growth, Integrity, and Respect. As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department of the Navy since 1964, managing, operating, and maintaining the U.S. Navy fleet in locations such as Philadelphia, Bremerton, California, and Hawaii. \n We are currently seeking skilled Shipfitters for a potential 5-year project in Norfolk, VA. This opportunity involves hands-on labor working at the Norfolk Naval Shipyard, offering a dynamic and fast-paced environment for experienced professionals. \n Note: This position is contingent upon contract award. Employment will begin only if and when the company secures the government contract associated with this role. \n Overview: \n Fabricate, assemble, and install metal structures for ship construction and repair. \n Responsibilities: \n\n • Cut, shape, and weld structural steel for ship frames.\n, • Install bulkheads, decks, and foundations.\n, • Read blueprints and technical drawings.\n, • Active DoD Secret clearance required.\n, • 4+ years of shipfitting experience, with at least 2+ years on Navy Ships.\n, • Completion of a formal trade training program (trade school, military training, apprenticeship, or equivalent) required.\n, • Strong metal fabrication skills.\n, • Ability to work 1st, 2nd and 3rd shift.\n\n \n Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, or status as a qualified individual with disability.

Epsilon Systems is seeking a Temporary Shipfitter II for Portsmouth, VA. Summary: Repairs, modifies, installs and dismantles various shipboard hulls, bulkheads or decks. Designs and fabricates complex fixtures and jigs. Responsibilities: \n • Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Reads and understands Epsilon Systems PPE Policy.\n, • Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Fabricates parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment at Epsilon.\n, • Qualifies as a Shipfitter in accordance with Epsilon Systems Process Instructions.\n, • Ensures that all requirements of the Epsilon Systems Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands complex terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • Determines fit-up requirements for a wide range of structural components in accordance with required technical drawings, manuals and instructions.\n, • Installs complex deck, hull and bulkhead systems IAW required technical drawings, manuals and instructions.\n, • Designs, fabricates and installs complex fixtures, jigs and targets to ensure proper alignment during welding/ brazing procedures.\n, • Determines size and material requirements for system modification or installation.\n, • Ensures control and assumes responsibility for Level I and material controls in accordance with Process Instruction\n, • Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension,\n, • Will provide mentoring to junior craftsman.\n, • Frequent travel and overtime are required.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with Shipfitting practices in a repair department or shipyard. Knowledge and practical skills tests required.\n, • 5 years' of experience as a shipfitter.\n, • Understands and performs the setup, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.\n, • Ability to read a ruler/tape measure.\n, • Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.\n, • Ability to properly prepare structural components for post assembly welding by performing end preparations such as beveling, grinding etc.\n, • Must be able to understand and perform the set-up, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.\n, • Has more advanced knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation practices, procedures, alignments and material requirements), blue print reading and interpretation, MILSPEC requirements.\n, • Understands fitting of structural components using dogs, wedges, strong-backs etc.\n, • Must be able to fit structural components to close tolerance requirements to prevent increased welding to bridge gaps.\n, • Ability to fabricate and install components as directed by Technical Work documents.\n, • Ability to fabricate molds/templates for structural forming including plate rolling with multiple offsets.\n, • Must have the ability to gain access to military bases and various government facilities.\n, • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Requisition Number: 25252 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $55,510.00 - $66,580.80 Security Clearance: Ability to Obtain Level of Experience: Entry Level This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Job Description HII Mission Technolgoies is seeking a HVAC CAD Engineer to support our customer in Chesapeake, VA. The ideal candidate will be responsible for creating, modifying, and managing detailed engineering drawings and designs for HVAC systems using Computer-Aided Design (CAD) software. You'll work closely with project managers, engineers, and technicians to ensure all designs meet project specifications, industry standards, and regulatory requirements. This position requires strong technical proficiency, meticulous attention to detail, and the ability to work on multiple projects simultaneously in a fast-paced environment. This position is contingent upon contract award. Essential Job Responsibilities • Works closely with design originators preparing drawings of unusual, complex or original design., • Prepares drawings, which require a high degree of precision., • Performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise., • Assures that anticipated problems in manufacture, assembly, installation and operation are resolved by the drawing produced., • Exercises independent judgment in selecting and interpreting data based on knowledge of the design intent., • Ability to gain knowledge with all tools of the trade (CAD program, rulers, compass, divider, calculator etc.) and of drafting and design standards., • Provides advice, guidance, and instruction to drafters., • May serve as primary point of contact for complex drafting projects., • Ability to prepare a complete drawing package without supervision., • Ability to lead site visits to vessels and shore sites to gather technical data for drawing development., • Calculates weight and moments changes as a result of drawing., • Calculates electrical loads or heat loads for specific drawing and provide proper breakers, cable type/size or heat exchanger for requirements., • Selects proper material for structural members., • Assists Electrical/Mechanical Engineers for stress/electrical/mechanical calculations., • Revises drawings to reflect As-Installed Conditions., • Train for LiDAR scanning., • Ability to utilize World Wide Web for research., • Ability to research existing conditions and where to find that information., • Ability to assist in customization of CAD Software.\n Minimum Qualifications • 0 years experience with Bachelors in related field., • Client experience requirements: Between 0 to 6 years of relevant experience., • Client education requirements: BA/BS degree in Engineering, Electronics, Telecommunications, Marine or Naval Architecture, or a relevant field; Candidate must have an undergraduate degree from an ABET accredited program., • 4 years of additional equivalent experience can be substituted for a BA/BS degree., • Ability to obtain and maintain a Secret Security Clearance., • Proficiency in CAD software., • Knowledge of Government and Commercial Design and Drafting requirements., • Computer literacy, including use of word-processing, spreadsheet, and database software., • Knowledge of designing and drafting software., • Excellent oral and written communication skills., • Capacity to sustain keen attention to detail.\n Preferred Requirements • An active Secret Security Clearance., • Thorough knowledge of Model Space/Paper Space techniques., • Complete understanding of Weight Group assignments for Ships Systems and manual for Bureau of Ships Consolidated Index/Expanded Ship Work Breakdown Structure) BSCI/ESWBS grouping.\n HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Epsilon Systems is seeking a full time Welder Specialist (Hyperbarics) in Portsmouth, VA. Summary: Performs various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Selects proper materials and requirements to perform welding functions. Fabricates and installs fixtures and jigs required for welding process alignments. Responsibilities: \n • Reports directly to the Production Manager. Once assigned, reports directly to the project Foreman in the performance of his/her responsibilities.\n, • Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.\n, • Ensures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.\n, • Reads and understands Epsilon Systems Mission Readiness Group PPE Policy.\n, • Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.\n, • Lays out material prior to performing machining operations to prevent possible errors.\n, • Machines parts to close tolerances ensuring finish requirements of the drawings are achieved.\n, • Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.\n, • Returns tools/equipment to proper location and reports any lost, missing, stolen or damaged items to the Tool Room Attendant in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Qualifies as a Welder in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Ensures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.\n, • Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.\n, • Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).\n, • Reads and understands advanced welding terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.\n, • Selects welding filler materials, joint design, proper heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Ensures control and assumes responsibility for Level I material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.\n, • Expertly performs all tasks required as a Welder.\n, • Provides mentoring to junior craftsman.\n, • Produces quality welds, including pipe, in difficult or adverse conditions and is proficient in multiple welding procedures/procedures.\n, • High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.\n, • 5 years' experience as a welder.\n, • Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.\n, • Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.\n, • Ability to obtain and maintain access to US Navy ships and government facilities.\n, • Ability to obtain and maintain a Secret security clearance\n, • Ability to travel.\n, • Ability to communicate effectively, work independently or in a group.\n, • Ability to do basic math, i.e. add, subtract, divide and multiply.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

The Marine Electrician will be responsible for supporting kSARIA's Field Installation Services organization on board US Navy ships. The position will be responsible for the installation, termination and testing of fiber optic and copper cable assemblies necessary to support a variety of ship's services, including power, communication, telephone, and alarm systems. Good communications skills (written and verbal), the ability to work off customer drawings, and a keen attention to detail are a must for this position. Previous experience and certification with multi-pin copper connectors is required. Fiber optic installation, termination and testing is preferred but not required, we will train and certify in house. The individual will report to the Field Service Operations Manager and/or Project Lead and must be willing to work overtime, including weekends and travel for extended periods of time when necessary. Install, tag and band fiber optic and copper cables on various classes of surface and submarine Naval Vessels. kSARIA has a very generous benefit package including insurance coverages, PTO and 401(k) \n • Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, waveguides or fiber optic cable onboard Navy vessels. \n, • Troubleshooting and testing of fiber and copper cables and circuits.\n, • Possess skills and abilities to perform the requirements of a shipboard or airframe electrician's trade with little supervision or guidance.\n, • Knowing how to read and interpret drawings, specifications, technical manuals, design notices, etc.\n, • Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc.\n, • Familiar with basic computer skills\n, • Familiar with MS-Office programs including Word and Excel. \n\n Requirements \n • Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement)\n, • Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5)\n, • Must be familiar with NAVY Standard Items\n, • Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams.\n, • Individual must have a keen attention to detail and be quality metric driven\n High School Diploma \n • Fluency in English (verbal and written)\n, • Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5)\n kSARIA is an Equal Opportunity Employer/Disabilities/Veterans

Job Description Company Overview: Continental Tide Defense Systems Inc. (Continental Tide) is headquartered in Reading, PA with additional locations in Philadelphia; San Diego, CA; Bremerton, WA and Norfolk, VA. We specialize in providing engineering and industrial services to the US Navy, Coast Guard, Military Sealift Command, and other Department of Defense Organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow in new ways. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Job Overview: Continental Tide is seeking an experienced and skilled Shipfitter for our Norfolk, VA office. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. The ideal candidate will have a solid background in structural fitting, blueprint reading, and fabrication work in a shipyard environment. Candidates must be safety-conscious, dependable, and able to work in a fast-paced, team-oriented setting. Essential Duties & responsibilities include but are not limited to the following: \n • Utilize knowledge, skills, and abilities to assemble, modify, lay out, fabricate, repair, and install plates, shapes, and/or pipe as part of a structural assembly in ship alteration and repair.\n, • Lay out, position, align, and fit structural metal parts according to blueprints and specifications.\n, • Fabricate and assemble metal parts using tools such as welding equipment, torches, grinders, and cutting tools.\n, • Interpret ship construction drawings and technical specifications to guide fabrication and installation.\n, • Perform tack welding and assist certified welders as needed, ensuring proper alignment and fit-up of structural components per project requirements.\n, • Inspect completed assemblies to ensure conformance to specifications and adherence to safety and environmental compliance standards.\n, • Employ appropriate trade methods to ensure watertight integrity on metal hulls, including precise fitting and securing of components.\n, • Manufacture and install interior and exterior structural items, such as bulkheads, foundations, and framing systems.\n, • Repair, remove, and/or replace damaged ship structures and fittings, creating structural welds and fittings as needed.\n, • Manufacture and install parts and assemblies from templates, ensuring accuracy and fit.\n, • Prepare surfaces for welding, burning, and riveting; lay out holes for drilling using various hand, electric, and pneumatic tools.\n, • Measure and verify dimensions using precision instruments such as calipers, micrometers, and tape measures.\n, • Coordinate and arrange for the work of multiple trades based on technical work documents, blueprints, specifications, and written or oral instructions.\n\n Experience and Skills \n • High School Diploma or GED preferred\n, • Minimum 5-8 years of marine or industrial ship fitting experience required\n, • Proficient in blueprint reading and layout techniques\n, • Familiarity with welding, burning, and cutting tools\n, • Ability to pass pre-employment physical and background check\n, • Must be authorized to work in the United States\n, • Ability to obtain & maintain a Secret clearance\n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n\n Other Requirements \n • Must be able to read, write and comprehend simple instructions\n, • Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form\n, • Must be able to calculate and understand units of measure, including fractions and decimals\n, • Must know how to measure using a scale and tape measure\n, • Must be able to wear standard PPE and use basic ship fitting tool list\n, • Must be able to withstand extreme temperatures & weather conditions\n\n Licenses/Certifications Preferred But Not Required: \n • Weld Certification\n, • Ultrasonic Impact Testing Treatment (UIT Treatment) - certification\n, • Carbon steel certification\n, • Passing grade on breaking test\n, • Certification in shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding (manual arc welding process that uses a consumable electrode covered with a flux to lay the weld)\n, • Certification in flux-cored arc welding (FCAW or FCA) (a semi-automatic or automatic arc welding process) \n, • Tack Welding via the welding school\n, • Preferred tack welding certification\n, • Exposure to open-air environments, including noisy, hot, and cold conditions.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Requires prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment.\n, • Must be able to communicate effectively to exchange and comprehend information.\n, • Frequent exposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. See all of our latest opportunities at or follow us on our LinkedIn page at Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Job Description Company Overview: Continental Tide Defense Systems Inc. (Continental Tide) is headquartered in Reading, PA with additional locations in Philadelphia; San Diego, CA; Bremerton, WA and Norfolk, VA. We specialize in providing engineering and industrial services to the US Navy, Coast Guard, Military Sealift Command, and other Department of Defense Organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow in new ways. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Job Overview: Continental Tide is seeking an experienced and skilled Shipfitter for our Norfolk, VA office. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. The ideal candidate will have a solid background in structural fitting, blueprint reading, and fabrication work in a shipyard environment. Candidates must be safety-conscious, dependable, and able to work in a fast-paced, team-oriented setting. Essential Duties & responsibilities include but are not limited to the following: \n • Utilize knowledge, skills, and abilities to assemble, modify, lay out, fabricate, repair, and install plates, shapes, and/or pipe as part of a structural assembly in ship alteration and repair.\n, • Lay out, position, align, and fit structural metal parts according to blueprints and specifications.\n, • Fabricate and assemble metal parts using tools such as welding equipment, torches, grinders, and cutting tools.\n, • Interpret ship construction drawings and technical specifications to guide fabrication and installation.\n, • Perform tack welding and assist certified welders as needed, ensuring proper alignment and fit-up of structural components per project requirements.\n, • Inspect completed assemblies to ensure conformance to specifications and adherence to safety and environmental compliance standards.\n, • Employ appropriate trade methods to ensure watertight integrity on metal hulls, including precise fitting and securing of components.\n, • Manufacture and install interior and exterior structural items, such as bulkheads, foundations, and framing systems.\n, • Repair, remove, and/or replace damaged ship structures and fittings, creating structural welds and fittings as needed.\n, • Manufacture and install parts and assemblies from templates, ensuring accuracy and fit.\n, • Prepare surfaces for welding, burning, and riveting; lay out holes for drilling using various hand, electric, and pneumatic tools.\n, • Measure and verify dimensions using precision instruments such as calipers, micrometers, and tape measures.\n, • Coordinate and arrange for the work of multiple trades based on technical work documents, blueprints, specifications, and written or oral instructions.\n\n Experience and Skills \n • High School Diploma or GED preferred\n, • Minimum 5-8 years of marine or industrial ship fitting experience required\n, • Proficient in blueprint reading and layout techniques\n, • Familiarity with welding, burning, and cutting tools\n, • Ability to pass pre-employment physical and background check\n, • Must be authorized to work in the United States\n, • Ability to obtain & maintain a Secret clearance\n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n\n Other Requirements \n • Must be able to read, write and comprehend simple instructions\n, • Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form\n, • Must be able to calculate and understand units of measure, including fractions and decimals\n, • Must know how to measure using a scale and tape measure\n, • Must be able to wear standard PPE and use basic ship fitting tool list\n, • Must be able to withstand extreme temperatures & weather conditions\n\n Licenses/Certifications Preferred But Not Required: \n • Weld Certification\n, • Ultrasonic Impact Testing Treatment (UIT Treatment) - certification\n, • Carbon steel certification\n, • Passing grade on breaking test\n, • Certification in shielded metal arc welding (SMAW), also known as manual metal arc welding (MMA or MMAW), flux shielded arc welding or informally as stick welding (manual arc welding process that uses a consumable electrode covered with a flux to lay the weld)\n, • Certification in flux-cored arc welding (FCAW or FCA) (a semi-automatic or automatic arc welding process) \n, • Tack Welding via the welding school\n, • Preferred tack welding certification\n, • Exposure to open-air environments, including noisy, hot, and cold conditions.\n, • Required to visit project sites aboard ships and rigs, both onshore and offshore.\n, • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required.\n, • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components.\n, • Exposure to sound levels exceeding 100 decibels.\n, • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment.\n, • May work in confined spaces with limited ventilation.\n, • Requires prolonged periods of sedentary work, including sitting and/or standing.\n, • May be required to operate machinery, power tools, and/or heavy equipment.\n, • Must be able to communicate effectively to exchange and comprehend information.\n, • Frequent exposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. See all of our latest opportunities at or follow us on our LinkedIn page at Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

1st Class Pipe Fitter (2nd Shift) Purpose: Colonna's Shipyard is seeking a 1st Class Pipe Fitter to support 2nd Shift operations in our Shipyard in Norfolk, VA. *This position will support 2nd shift operations (3:30PM - 12:00AM). Job Description: • Perform layout, fabrication, installation, testing and repair of pipe systems., • Install simple systems without the use of blueprints., • Perform target work for piping systems by taking an existing sample of an old piping system to make a new piping system., • Construct dimensionally correct mock-up for off-site prefabrication, read blueprints, fabricate stands and jigs, and create targets., • Construct piping systems within required tolerances., • Track job from material list through completion., • Fit pipe and properly prepare joints for welding to meet the specific requirements of the system on which work is being done., • Utilize blueprints and make fabrication sketches from which another mechanic could fabricate a unit of pipe to complete work assignments., • Determine and apply joint and system tolerances., • Set up and operate burning torch., • Fabricate and design pipe hangars., • Perform tests on piping systems with air and water., • Routinely Tack Weld, Silver Braze, Soft Solder, and Burn., • Work with all materials and sizes of pipe and tubing., • Calculate take-ups of butt welds, socket welds, and threaded joints., • Lay out all piping systems., • Safely complete local air testing, compressed air testing and hydrostatic testing., • Operate pipe bending machines., • Evaluate joint allowances and build the piping systems within required tolerances., • Work with all types of pipe joints such as welded, screwed, soldered, and glued., • Work with various types of materials such as copper, CuNi, Cres, Steel, etc., • Train subordinates and supervise crew as senior mechanic., • Adhere to industry codes, specifications, and regulations., • Must have at least seven (7) years' experience in shipboard Pipefitting., • Must have the ability to use hand tools and instruments associated with the Pipefitting trade including but not limited to, pipe benders, bandsaws, bench grinders, drill presses, pipe threaders., • Must be able to work effectively with others., • Must be trained in the NAVSEA Standard Items that are applicable to the pipefitter trade and demonstrate an advanced understanding of bevels, types of backing rings, consumable inserts (E/B rings), open roots, saddles, miters and tolerances., • Must be able to comprehend blueprints, sketches, and templates., • Must be able to calculate and understand units of measure, including fractions and decimals., • Must know how to measure using a scale and tape measure., • Prefer Technical Training., • DBIDS eligibility preferred., • Mechanical experience or Outside Machinist experience highly preferred.\n\n Security Requirements: • Position requires US Citizenship. \n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Requisition Number: 25613 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $55,000.00 - $70,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII Mission Technologies as a Marine Electrician and make an impact on the safety of our US Navy ships. As a Marine Electrician with our Elevator Support Unit (ESU), you will provide task support by install, operate, maintain maintenance repairs and technical support on equipment. This is a full-time position, locate in Chesapeake, VA. Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task. What You Will Do • Support trades team by working on active class surface ships to perform alterations and installations for fleet modernization . In stall, operate, maintain, repair, and modify equipment., • Perform a variety of maintenance and technical support on products such as shipboard systems, integrated systems and related equipment/software at company, customer and/or field locations. Provide onsite training of customer support personnel when required. Perform quality inspections on finished product and provide onsite training of customer support personnel when required., • Troubleshoot and diagnose malfunctions to eliminate problems in minimum time. Apply comprehensive understanding of production and processes toward completion of assignments., • Interface with customers, manage subcontractors, provide work direction and lead others. May manage one or more multiple jobs. Perform a variety of complicated and non-routine tasks including duties outside of specialty in order to complete installation or work assignment., • Develop and use technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedule, report and brief customers and senior management. \n What You Must Have • High School education, or Trade School or equivalent, and 4 years of related experience., • Must be a U.S. citizen., • Must provide own hand tools as designated per trades specialty., • Must have complete comprehension of marine electrical systems, equipment, functions, and tools., • Must have working knowledge and experience with installing, troubleshooting, testing, maintenance and repairs of electrical systems and its associated equipment on marine vessels., • Must be proficient in reading electrical drawings and schematics., • Must be able to follow/enforce safety procedures to ensure a safe and secure work environment., • Must be able to obtain and maintain a DoD secret security clearance and maintain clearance level throughout employment., • Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment., • Must be able to travel between 11% - 25% when not assigned to local tasking. \n Preferred: Bonus Points For • Candidates who have graduated from and/or completed a vocational school, apprenticeship program or a skilled trades certificate program are preferred., • Experience related to maintenance and repair of shipboard aircraft elevator, Advanced Weapons elevators, and/or ordnance handling equipment and vertical package conveyors preferred., • Candidate with a current or active DoD clearance preferred., • OSHA 10 Maritime Certification a plus., • Basic computer uses and familiarity with Microsoft Office Suite software a plus. \n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Here at Global - a 1st Flagship Company (), a woman-owned small business, we are committed to Individual Accountability, Growth, Integrity, and Respect. As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department of the Navy since 1964, managing, operating, and maintaining the U.S. Navy fleet in locations such as Philadelphia, Bremerton, California, and Hawaii. \n We are currently seeking skilled Marine Sheet Metal Mechanics (Inside Shop) for a potential 5-year project in Norfolk, VA. This opportunity involves hands-on labor working at the Norfolk Naval Shipyard, offering a dynamic and fast-paced environment for experienced professionals. \n Note: This position is contingent upon contract award. Employment will begin only if and when the company secures the government contract associated with this role. \n Overview: \n Fabricate and install sheet metal components for Navy ship repair and modernization. \n Responsibilities: \n\n • Cut, bend, and assemble sheet metal parts.\n, • Install ventilation, ducting, and structural components.\n, • Use shop equipment for forming and cutting.\n, • Active DoD Secret clearance required.\n, • 4+ years sheet metal experience, with at least 2+ years on Navy Ships.\n, • Completion of a formal trade training program (trade school, military training, apprenticeship, or equivalent) required.\n, • Knowledge of marine ventilation and sheet metal systems.\n, • High school diploma/GED; trade training preferred.\n, • Ability to work 1st, 2nd and 3rd shift.\n\n \n Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, or status as a qualified individual with disability.

Epsilon Systems SRS Repair, Inc. Is seeking a full-time Welder I in Portsmouth, VA. Summary : Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Duties and Responsibilities : \n • Operates safety equipment and uses safe work habits.\n, • Welds components in flat, vertical, or overhead positions.\n, • Ignites torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.\n, • Clamps, holds, tack-welds, heat-bends, grinds and/or bolts component parts to obtain required configurations and positions for welding.\n, • Detects faulty operation of equipment and/or defective materials and notify supervisors.\n, • Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.\n, • Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.\n, • High School Diploma or equivalent.\n, • Knowledge, or experience and must pass qualification test for each process\n, • Ability to obtain and maintain base access to assigned government/military/private installations.\n, • Knowledge of a range of welding principles, processes, and techniques requiring complete penetration and fusion of base and filler metals.\n, • Ability to maintain dimensions and tolerances to specifications, weld parts and structures that vary in size, shape and thickness.\n\n Preferred Qualifications: • Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.\n, • Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).\n, • Able to lift, carry and move objects up to 50 lbs. in weight.\n, • Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.\n, • Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.\n, • Able to perceive and distinguish normal range of colors.\n, • May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.\n\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Select proper materials and requirements to perform welding functions. Fabricate and install fixtures and jigs required for welding process alignments. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires no supervision/oversight. Has experience in the trade qualifications and can perform all work required as a Welder and will provide mentoring to junior craftsman. \n, • Must be able to understand and perform the set-up, adjustment, and operation of various welding equipment and hand tools used in the trade. Select welding filler material, joint design and proper heat ranges as directed by Technical Work Documents. \n, • Read and understand terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process. \n, • Fabricate and install fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop. \n, • Must have the ability to obtain government base access. \n, • Knowledge and practical skills tests required. \n, • Qualify as a Welder/Workmanship Inspector in accordance with OII Process Instructions and welding procedures.\n, • Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. Automated welding processes.\n, • Must be able to obtain a Secret/Confidential security clearance.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night\n, • Frequently working on or near moving equipment and vibrating equipment\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels\n, • Light is intense/glare\n, • Occasional exposure to open fire/flames/sparks\n, • Frequent exposure to airborne dust, fumes, and gases\n, • Includes exposure to contaminants\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable\n, • Job tasks are performed in close physical proximity to other people\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Position Title: Welder II, III Work Location: Chesapeake, VA FLSA Status: Full-Time, Non-Exempt REQ#25_09026E Summary of duties - The Welder applies appropriate welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials for production. Lays out and marks position pieces on parts or sub-assemblies using rule, square, scribe or templates. Fits by hand or position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and / or hand tools. May perform fitting, welding, and silver brazing on shipboard piping systems on all types of metals. Must possess knowledge and experience in the set up and operation of machines and tools to include: mig welder, tig welder, plasma arc cutter, gas cutter, carbon arc cutter, bandsaw, drill press etc. to cut and weld parts to specifications. Uses hand tools such as grinders, needle guns, clamps, fixtures, calipers, scribes, combination squares etc. Basic knowledge of weld theory to include the following processes: SMAW, GMAW, GTAW and / or Silver Brazing. Some basic knowledge of ferrous / non- ferrous metals and the ability to read / interpret blueprints required. May be assigned the duties and responsibilities of other positions for which qualifications are met. Periodically required to lift/move equipment up to and including 50 pounds. Specific description of duties: \n • Studies blueprints, sketches, drawings, manuals, specifications or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements\n, • Verifies conformance of finished work piece to specifications\n, • Fits and assembles parts into complete assemblies\n, • Verifies dimensions and alignment of assemblies\n, • Develops specifications from general description and draws sketch of part or product to be fabricated\n, • Ensures proper care in the use and maintenance of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices\n, • Welds foundations, brackets, studs, platforms, piping, and other items to support on-site installations\n, • Maintains cleanliness of the work area\n, • May provide training / oversight of junior personnel\n, • May require the ability to perform supervisory duties\n, • Overtime is routinely required but not guaranteed\n, • Travel outside the local area may be required\n, • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals.\n\n Education/Specialized Training: Level II: \n • HS diploma or GED may be required depending on varying contract stipulations\n, • Apprenticeship with two years, or applicable trade school with three years, or four years related experience\n, • Certificate documentation required for listed education\n, • Fire watch certification\n\n Level III: \n • HS diploma or GED may be required depending on varying contract stipulations\n, • Apprenticeship or applicable trade school with six years practical experience, or 8 years related experience\n, • Certificate documentation required for listed education\n, • Certification documentation in areas of expertise (SMAW, GMAW, TIG ETC)\n, • Fire watch certification\n\n Security Clearance: • Clearance up to Secret level may be required.\n Physical/Environmental Job Requirements: Physical requirements include the following: \n • Lifting/moving up to and including 50 pounds\n, • Routinely climbing several flights of stairs\n, • Performing tasks in confined spaces\n\n Our work is primarily onboard naval vessels that may include variables of physical activity, i.e. stooping, climbing, walking, etc. In performing these duties, you may be required to work outdoors or in the warehouse. You will experience temperature variations, extremely loud noises, and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email [email protected] or call: 757-460-8800. To Apply: Visit and click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Shipfitters are responsible for the layout, fabrication and installation of structural parts such as plates, bulkheads and frames. Shipfitters brace structures in position for welding. Shipfitters prepare templates for fabrication of nonstandard parts. Duties and Responsibilities include the following. Other duties may be assigned. • Helps fabricate template for bending / shaping ship structures, frames, bulkheads and braces., • Assists with measurements, layout and cutting of templates., • Completes pre and post weld checks., • Performs chipping, beveling, grinding and cleaning of surfaces to be welded using power and hand tools., • Perform housekeeping efforts to maintain cleanliness of the worksite., • Deliver materials as required., • Performs duties as Fire Watch., • Participates in special projects as required., • Employees may be required to travel for work to other locations\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • High School diploma or GED., • This position requires 1-5 years of experience in the shipfitting trade., • Apprentice school or trade school not required, but preferred. \n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools \n\n Knowledge, Skills and Other Abilities: • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00033 This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Shipfitters are responsible for the layout, fabrication and installation of structural parts such as plates, bulkheads and frames. Shipfitters brace structures in position for welding. Shipfitters prepare templates for fabrication of nonstandard parts. Duties and Responsibilities include the following. Other duties may be assigned. • Fabricate templates for bending / shaping ship structures, frames, bulkheads and braces., • Measures, lays out and cuts templates., • Fits foundations and structural members using bar, strip, angle and plate and scribes. foundations to deck and bulkhead structure., • Complete pre and post weld checks., • Performs chipping, beveling, grinding and cleaning of surfaces to be welded using power and hand tools., • Proficient in oxyacetylene and plasma cutting., • Perform housekeeping efforts to maintain cleanliness of the worksite., • Delivering materials as required., • Perform duties as Fire Watch., • Participates in special projects as required., • Employees may be required to travel for work to other locations.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • High School diploma or GED., • This position requires 1-5 years of experience in the ship fitting trade. Equipment: • Must be able to read and understand material safety data sheets (MDS). While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE STATEMENT: We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00035 This position is currently accepting applications.

The firm offers a variety of services including construction, architectural design, trade services, virtual design and construction, and LEED/sustainable design management for projects ranging from $30M to over $100M. We specialize in fast-track projects in new commercial construction for both publi

Job DescriptionSteelhead Management is a full-service property management company formed in 2016 to manage multifamily and mixed-use assets owned by the Holladay Corporation and Spy Rock Real Estate Group, both of which are active developers. Steelhead’s team is comprised of best-in-class personnel, both at the corporate and site level, with a team-first and people-first culture. Steelhead does not manage third-party assets and focuses on NOI and cash flow optimization within a portfolio of owned assets. Steelhead is responsible for managing day-to-day operations for a portfolio of residential, commercial, and mixed-use assets. The property management division manages over 3,000 residential units and 200,000 SF commercial space in the Richmond, Tidewater, and DC markets. Our goal is to ensure our owners and investors receive the maximum return on investment through increased distributions and asset value. Job Description: We are seeking a highly motivated and enthusiastic individual to serve as a Service Technician for a rapidly growing and dynamic property management organization. The Service Technician is responsible for general maintenance, including repairs, troubleshooting, apartment turnover, and preventative maintenance at Element at Ghent in Norfolk, VA. This is an outstanding career opportunity for an experienced professional to be part of an exciting team. This position will report to the Service Manager. Responsibilities: • Work with the Service Manager to ensure maintenance functions are performed promptly and adequately., • Ensure effective and timely follow-up with residents, vendors, and the property management team on all maintenance services provided., • Respond to all on-call emergencies promptly., • Complete and follow up on all open unresolved tickets., • Use general maintenance equipment, including, but not limited to, hand tools, ladders, landscaping equipment, and required safety equipment; all equipment must be used safely., • Inspect grounds, buildings, and other community features daily to identify required maintenance tasks, minimize liability concerns, and ensure excellent curb appeal at all times., • Participate in company training classes and meetings, • Follow policies relating to, but not limited to, fair housing, OSHA, pool, and safety standards set by the company., • Other tasks or duties as assigned.Qualifications:, • Minimum of 2 years of experience in apartment maintenance, including basic electrical & plumbing diagnostics/repair., • Be a team player in an atmosphere of mutual respect., • Must have painting and drywall repair experience., • Have a positive attitude & effective communication skills., • Enjoy helping people., • Have basic tools for the trade., • Provide a valid driver’s license and have reliable transportation., • Have the flexibility to respond to ‘off-hour’ emergencies and resident concerns occasionally., • HVAC certification preferred (CFC Universal).SteelHead Management is an equal opportunity employer. Powered by JazzHR gkPMrin0xg

Job DescriptionSalary: Why Ulliman Schutte? We are Building a Better Environment! As a national leader in the construction and renovation of water and wastewater treatment plants, pump stations, and utility infrastructure, we offer challenging and meaningful work that makes a lasting difference in communities across the U.S. We are currently hiring experienced Construction Skilled Laborers and Concrete Formwork Carpenters to join our team in Norfolk, VA. This position includes competitive wages and industry-leading benefits: We are actively hiring construction trades for the following roles: • Form Carpenters, • Skilled Construction Laborers Qualifications: • Minimum 1 year of experience in construction or a skilled trade, • Familiarity with job site safety practices and tools, • Ability to follow direction and work well in a team environment, • Experience with water or wastewater plant construction is a major plus, • Reliable transportation to and from the jobsite What Ulliman Schutte Brings to the Table • Great pay rates and compensation packages, • Foremen and crews that focus on safety, so we all go home in the same condition we arrived., • Superintendents that reward reliable hard workers., • Training and advancement for dedicated people. Ulliman Schutte Construction, LLC is focused on building teams of honest, dedicated professionalswhohave a passion to Build a Better Environment for our employees, customers, business partners, and the communities we serve. We are proud to be an Equal Opportunity Employer who does not discriminate on the basis of race, color, sex, gender identity, sexual orientation, religion, national origin, Veteran or disability status. Ulliman Schutte is a drug-free working environment.All offers are contingent upon a successful drug screening and E-Verify.

Job Description Copper River Technologies is seeking an experienced Construction Engineering Technician to support quality assurance, safety management, and technical coordination on complex construction projects administered by the Naval Facilities Engineering Systems Command (NAVFAC) and the U.S. Army Corps of Engineers (USACE) in Portsmouth, Virginia. This role requires hands-on oversight at active construction sites to ensure compliance with contract requirements, safety regulations, and quality standards. The ideal candidate will be detail-oriented, proactive, and adept at collaborating with government clients, contractors, and subcontractors. Responsibilities (include but are not limited to): • Ensure contractor compliance with approved Quality Control Plans, including participation in the three-phase inspection process., • Conduct site inspections, witness system tests, and support commissioning of critical systems (HVAC, electrical, fire/life safety, etc.)., • Verify materials for compliance, condition, and approval for payment., • Manage field documentation including daily reports, quality records, and progress photos., • Support closeout activities, including review of as-builts, warranties, and O&M manuals., • Review and support safety planning documents (Accident Hazard Analyses, Accident Prevention Plans)., • Observe and document critical lifts, ensuring compliance with NAVFAC P-307 crane safety requirements., • Perform periodic safety assessments, ensure postings are in place, and support mishap investigations., • Coordinate permits, utility outages, and site access in support of ongoing construction activities., • Review submittals, RFIs, baseline schedules, and provide technical input to the project team., • Assist with punch list development, acceptance inspections, and commissioning., • Provide support to the Contracting Officer and Construction Manager with invoice reviews, contract modifications, and related documentation., • Clearance:, • Active Secret Security Clearance required., • Experience:, • 5+ years as a Quality Control Manager on NAVFAC or USACE projects, OR 10+ years of trade foreman experience (concrete, mechanical, electrical, masonry, or carpentry) on commercial, industrial, or military projects (residential experience does not qualify)., • Certification:, • Certificate of completion for Construction Quality Management (CQM) for Contractors from NAVFAC/USACE, or ability to complete within 60 days of hire., • Valid OSHA 30-Hour Construction Safety card, or ability to obtain within 30 days of hire., • Ability to pass an open-book exam on the EM 385-1-1 Safety and Health Requirements Manual within 15 days of onboarding., • Preferred Qualifications, • Experience working with NAVFAC/USACE clients and federal acquisition processes., • Knowledge of construction scheduling, safety enforcement, and quality control., • Proficiency with reporting/project systems (RMS/QCS, ieFacman, MS Project)., • Travel:, • Willingness to travel as required to job sites and project locations. About Copper River & The Native Village of Eyak: Owned by the Native Village of Eyak (NVE), a federally recognized Alaska Native Tribe, the Copper River Family of Companies are a collection of entities that deliver a complementary set of solutions and services to support the diverse missions and requirements of our clients. Proud participants of the Small Business Administration's (SBA) 8(a) Business Development Program since 2006, our companies consist of both current and graduation SBA 8(a) entities. It is our collective purpose to support the Tribe and diversify the NVE's ability to facilitate economic advancement. The income generated from our companies helps the Native Village of Eyak fund health and social services, economic development, natural resource/environmental education, jobs, job training, and other benefits to the NVE in a manner that is consistent with Alaskan Native cultural values and traditions. Copper River's Culture The Copper River Family of Companies has a positive, supportive, and thriving culture. At the foundation of our culture is a focus on collaboration. No matter your role or which operating company you work for, we are ONE TEAM working toward the same goals for our customers and for our collective owner- The Native Village of Eyak. How we treat each other is just as important as the work we deliver. Benefits • Comprehensive medical, dental, and vision coverage, • Flexible Spending Account - healthcare and dependent care, • Health Savings Account - high deductible medical plan, • Retirement 401(k) with employer match, • Open leave policy and paid holidays Disclaimer: The Copper River Family of Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

We are seeking outgoing, energetic individuals to join the event marketing team as part-time Event Marketers at trade shows, fairs, festivals, and events throughout the area. Individuals are assigned to trade shows/events/fairs/festivals and community events to generate qualified leads for the sales

Minimum 5 years in the field or in trade-related training in a design, construction inspection, construction materials engineering/testing, or other construction related field. Knowledge and experience with equipment used in construction inspection, and field testing of construction materials. Inspe

SUMMARY Bering Global Solutions, a company within the BSNC family, is currently seeking a qualified Plant Operator Trainee for the BOS contract in Chesapeake, VA. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. assists one or more workers in the skilled plant operator or maintenance trades by performing specific or general duties such as: scheduled janitorial duties, scheduled tank cleaning using a fire hose or pressure washer, painting, performing planned maintenance and cleaning of plant equipment, performing plant rounds, pulling samples, assisting with laboratory duties, performing laboratory deliveries, operation of a sludge press, general grounds work when required, picking up deliveries, keeping operators supplied with materials and tools, cleaning work areas, machines, and equipment being serviced; assisting operators by holding materials or tools; and performing other unskilled tasks as directed by operators. The kind of work the helper is permitted to perform varies from trade to trade. In some trades the helper is confined to supplying, lifting, and holding materials and tools, and cleaning working areas and in others, the worker is permitted to perform specialized machine operations, or parts of a trade that are also performed by workers on a full-time basis. Must be able to qualify, apply and take required licensing tests advancing to operator status following the required timeline set by Bering Global Solutions, all required licensing can be achieved in 2 years. Must be willing to work the assigned shifts and study approved material during down time with the operator’s approval. Advancement to operator status is a requirement and failure to do so in a timely manner can result in termination. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications Must be able to pass a background check Must have a valid driver’s license and transportation You should possess basic tools needed to perform maintenance High school education or equivalent Must be able to pass drug screening 3-5 years of experience in maintenance and repairs. Must be willing to work a rotating schedule requiring shift work. Must be willing to work scheduled holidays and possible overtime if required. Knowledge, Skills, Abilities, and Other Characteristics Excellent attention to detail Excellent oral and written communication skills Ability to work in a fast-paced environment Ability to interface with all levels of management Excellent time management, scheduling, and organizational skills Ability to work well independently or in a team setting Have good knowledge of troubleshooting techniques to determine exact problems and tackle them accordingly Excellent ability to communicate system problems to both co-workers and management for proper understanding Exhibit good mechanical skills to handle equipment to avoid causing injuries to self and others on ground Preferred Facility maintenance experience with the DoD preferred. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Lifting and carrying weights up to 50 lbs. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. The job is performed indoors and outdoors with exposure to many different types of weather. Must be able to lift 50 lbs. SUPERVISORY RESPONSIBILITIES No supervisory responsibilities. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employed drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer.All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job Description In-Side Sales and Marketing Working in the Home Furnishing and accessory industry: A great entry or re-entry position to learn Marketing and sales skills. Furniture Classics has an opportunity to join our new in-house sales and marketing team. The ideal candidate processes: • Desire and ability to learn good sales and marketing skills., • Ability to embrace new ideas and changes., • Good communications skills with clear understandable diction over the phone., • Comfortable being direct and persuasive., • Ability to interact with customers at trade shows and over the phone., • Internet savvy, data entry skills for entering orders and general computer skills., • Self-motivated and disciplined. Looking for a career not just a job. You will be contacting existing customers and prospects to gain orders and reorders. The in-house sales and marketing team members travel 3 to 4 times a year to trade shows in Atlanta and High Point to meet and work with customers and prospects. The inside salesperson follows up on customers attending markets to assists them in putting together their orders and making recommendations. The sales person maintains and services their own customer base from our offices in Norfolk. Rather than traveling to see our customers in their stores, we work thru our website using “screen share” as if we were physically in front of them. You will be trained or retained by an industry professional in the skills and techniques of successful sales and marketing. This is not a customer service position, it is a sales and marketing job. A questionnaire is required to be filled out prior to a telephone interview. Join us to learn great sales and marketing skills while you grow and earn. Furniture Classics is a leading wholesaler of beautiful Home furniture and accessories products selling to the better retailers and interior designers around the country. Compensation: A base salary plus commissions, earnings of $48K to $60k first year. Position includes standard benefits, paid time off, health insurance and company sponsored 401(K) with matching contributions. Apply today for the opportunity to join an established and growing organization. Qualified applicants will receive a questionnaire by email and a follow up phone interview. Applicants that meet our standards will receive an in-person interview after the phone interviews.

Job Description Here at Global - a 1st Flagship Company (), a woman-owned small business, we are committed to Individual Accountability, Growth, Integrity, and Respect. As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department of the Navy since 1964, managing, operating, and maintaining the U.S. Navy fleet in locations such as Philadelphia, Bremerton, California, and Hawaii. We are currently seeking skilled Marine Electricians for a potential 5-year project in Norfolk, VA. This opportunity involves hands-on labor working at the Norfolk Naval Shipyard, offering a dynamic and fast-paced environment for experienced professionals. Note: This position is contingent upon contract award. Employment will begin only if and when the company secures the government contract associated with this role. Overview: • Install and repair wiring, panels, and controls., • Test and troubleshoot electrical systems with meters and analyzers, • Interpret blueprints, schematics, and technical manuals., • Active DoD Secret clearance required., • High school diploma/GED; completion of a formal trade training program (trade school, military training, apprenticeship, or equivalent) required., • 4+ years as an electrician with at least 2+ years on Navy ships, • Knowledge of NFPA 70E and shipyard electrical standards. Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, or status as a qualified individual with disability. As a federal contractor all employment offers are contingent on passing a pre-employment background check and drug screen. Job Posted by ApplicantPro

Job Description IF YOU CAN'T, WE CAN! Do you have a strong desire to succeed and value professional growth? Are you looking for an employer who values diversity, high-quality service, and giving back to their community? If so, you've come to the right place, WE are looking for YOU! Why should you work for the Michael and Son family? Our earnings are performance based and are amongst the highest on the East Coast in the Service Trade Industry. • Upon successful completion of training you will receive A FULLY-STOCKED TAKE HOME service truck with paid automotive insurance, gas card, company cell phone, and tablet for paperless ticketing and dispatching., • Michael and Son provide industry-leading training programs to grow your skills., • Rotating on call hours that works with your schedule for even more EARNING POTENTIAL., • Health, • Dental, • STD/LTD, • Vision, • Supplemental Life, • Legal Shield, • FSA, • 401(k) We're looking for Experienced Drain Technicians. The right candidate will have experience in the following areas: Duties and Responsibilities: • Perform drain cleaning on plumbing systems., • Perform minor to non-complex service work on plumbing residential environments., • Communicate problems, propose solutions, and explain billing to customers., • Snake drake drains to find what clogs them. Qualifications: • Must have a Driver's license., • Pass Drug Test and Background., • Hands-on/Technical Experience., • Authorized to work for any employer in the U.S., • Willing to work weekends Michael and Son Services, Inc. is the premier, provider of Electrical, Plumbing, HVAC, and Restoration services. Michael and Son Services is a family-owned and multi-state operated business based out of Alexandria, Virginia, with locations along the East Coast, we've been in business since 1976. We place tremendous value in our employees because, without them, Michael and Son wouldn't be where it is today leading the charge of the service industry! Our company provides an excellent work environment and is passionate about its dedication to achievement. We place an enormous value on the welfare and commitment of our employees as well as the superior level of service they provide to our customers. Don't let this opportunity pass you by!!!! We are growing at a rapid pace, the opportunity for advancement is determined by how much you want to succeed. Michael and Son take pride in promoting within. Think you have what it takes to showcase your talent in the service industry? Apply today, fill out our short. employment application at . Thank you for your interest in Michael and Son Services Inc. Michael and Son Services provides equal employment opportunities to all qualified applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Job purpose Fitters must have strong math skills and a good mechanical aptitude. Fitters build in-place all interior structures, hatches, doors, bulkheads, etc., to complete all the steel work in the ship. Fitters are expected to climb and work in high areas or crawl and work in cramped confine spaces and perform tasks with all kinds of working conditions in-between. A fitter will apply their skills in the shops, platens, dry-docks and onboard ships in support of, ship repair and ship overhauls. Master, 1st, 2nd and 3rd class levels are based on proficiency, knowledge, skills and abilities. This job description applies to all positions listed below: Master Class: 1st Class: 2nd Class: 3rd Class Duties and responsibilities Knowledge in burning basic use of torch/light torch); make up plating (align, fit) and knowledge of plating material (CuNi- Copper nickel, Aluminum, stainless steel) ; blueprint (reading, interpret) including sketching; tack welding; portable plasma arc; lay out access cuts and inserts; tank inspections/testing; certifications in SMAW, FCAW or FCA • Fitters must have strong math skills and a good mechanical aptitude, • Fitters build in-place all interior structures, hatches, doors, bulkheads, etc., to complete all the steel work in the ship, • Fitters are expected to climb and work in high areas or crawl and work in cramped confine spaces and perform tasks with all kinds of working conditions in-between, • will apply their skills in the shops, platens, dry-docks and onboard ships in support of, ship repair and ship overhauls, • Performs safe and effective use of craft related tools and equipment, including but not limited to: millers, sanders, grinders, burr motors, band saws, skill saws, saws all, come along and chain falls etc., • Obtain GMAW ABS ‘B’ Class Weld Certification for aluminum applications., • Performs basic layout of plates, materials and weldments using basic engineering sketches, drawings, and diagrams with minimal supervision., • Performs ship fitting functions such as but not limited to fit up of structure, cutting, sniping, sanding, grinding, prepping, tacking and the fit up of plates with minimum supervision., • Performs fitting operations with limited supervision using standard ship fitting equipment to accomplish fabrication and ship repair duties., • Monitors working environment for compliance with quality, safety, environmental and health regulations., • Must be willing to work with and train lower-skilled workers., • Knowledge in burning basic use of torch/light torch); make up plating (align, fit) and knowledge of plating material (CuNi- Copper nickel, Aluminum, stainless steel) ; blueprint (reading, interpret) including sketching; tack welding; portable plasma arc; lay out access cuts and inserts; tank inspections/testing; certifications in SMAW, FCAW or FCA, • Receives instructions, prints, and work orders for the job., • Plans details of working procedures and tools and material requirements., • Fabricates equipment by cutting, burning, and tack welding various metals., • Cleans and prepares surfaces to be welded. Sets up, assembles, and tacks weld parts., • Uses burning equipment to dismantle assemblies and to cut material to size and shape., • Technical Capacity, • Communication Proficiency, • Problem Solving/Analysis, • Initiative, • Results Driven, • Thoroughness Work Environment Work is regularly performed in outside weather conditions, including rain and extreme heat, near moving mechanical parts and includes occasional exposure to wet and/or humid conditions and to vibration. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/ Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday. This position periodically requires long hours and weekend work. Regular and predictable on-site attendance is an essential function and a prerequisite to perform other essential functions of the position. Travel Travel is primarily local during the business day, although periodic out-of-the-area and overnight travel may be expected. Required Education and Experience • High school degree or equivalent, • Apprentice or trade school Education based on requirements that are job-related and consistent with the business necessity. • Must be able to work ALL assigned shift hours as production needs dictate., • Must be able to learn to read, interpret and utilize blueprints., • Must be able to use a variety of tools and measuring devices during this process., • Must be able to learn to cut, grind, shape, fit and tack weld steel plates., • This is an industrial environment involving extreme heights, confined spaces, physical labor and various weather conditions within a shipyard environment., • Must be able to pass Physical Agility Test., • Must be qualified to wear a respirator. AAP/EEO Statement Equal Employment Opportunity has been, and continues to be, a fundamental principle at Lyon Shipyard, Inc. It is the company's policy that opportunities be available to all persons without regard to race, sex, age, color, religion, national origin, disability, citizenship status, or any other category protected under state or local law. This policy applies to employees and applicants and to all phases of employment including hiring, promotion, demotion, and treatment during employment, rates of pay or other forms of compensation, and termination of employment. Lyon Shipyard is proud to be a drug free workplace. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Friday - Sunday 630 am to 715 pm Monday - Thursday 630 am to 515 pm

Job Description MHI Ship Repair & Services is a major marine repair and conversion contractor serving the U.S. Navy, Military Sealift Command, Maritime Administration and Commercial ship owners and operators worldwide. Our shipyard is conveniently located in the Mid-Atlantic region at the port of Hampton Roads, Norfolk Virginia. MHI is hiring experienced Ship Repair Electricians. Depending on skill level, duties may include the following: • Analyzing jobs from start to finish ensuring proper and safe work methods used., • Analyzing circuits, wiring diagrams and drawings to install, repair, calibrate, service or replace electronic devices and systems., • Performing work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment under direction of supervisor., • Starting and shutting down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements., • Installing conduit to bulkheads with brackets and screws, using hand tools, and threads wires through conduit to terminals, such as connection boxes, circuit breakers, voltage regulators, and switch panels., • Striping insulation from wire ends and solders ends to terminals, using stripping pliers and soldering iron., • Connecting power-supply circuits to radio, radar, sonar, fire control, and other electronic equipment., • Testing electrical characteristics such as voltage construct instrument panels, using hand tools, rulers, dividers, and power drills, following specification.MINIMUM QUALIFICATIONS, • Must have a minimum of 5 years of experience as a Shipyard electrician., • Thorough knowledge and understanding of wire sizes and capacity of each., • Thorough knowledge and understanding of AC and DC power and control of same., • Must have knowledge of tools, equipment and machining processes of ship fitting trade., • Must be able to work effectively with others. MHI is an Affirmative Action/EOE Employer of protected veterans and individuals with disabilities.

Job DescriptionDescription: Position Overview The Content Marketing Specialist will be a modern content creator responsible for producing engaging visual and written materials across multiple platforms. This role requires a strong blend of graphic design, copywriting, merchandising, digital marketing, and e-commerce skills, with an eagerness to explore and leverage AI tools for content development and campaign optimization. The ideal candidate has 3–5 years of hands-on marketing experience, thrives in a fast-paced environment, and brings fresh creative ideas that help tell SCI’s story while also driving qualified leads and e-commerce growth through Shopify. Key Responsibilities • Design and develop visual content including graphics, presentations, digital ads, trade show displays, and branded collateral., • Write and edit compelling copy for social media, website, email campaigns, and client-facing materials., • Create content and landing pages to support digital paid advertising campaigns that drive qualified traffic to SCI’s Shopify site for lead generation and e-commerce sales., • Support brand merchandising efforts (e.g., uniforms, giveaways, trade show materials) to maintain consistent brand identity., • Create and manage short-form video content for digital campaigns (social media, website, presentations)., • Capture and edit photography (products, events, team) for use in marketing channels., • Manage and update SCI’s website, Shopify store, and social media presence to align with branding and business goals., • Experiment with and adopt AI tools for content generation, marketing automation, and analytics., • Partner with Sales, Operations, and Leadership to create customer-focused storytelling for campaigns, proposals, and outreach., • Track performance of digital campaigns, landing pages, and e-commerce sales to recommend optimizations.Requirements: Qualifications • 3–5 years of professional marketing, communications, or design experience., • Strong portfolio of visual, written, and digital marketing content (required)., • Proficiency with graphic design tools (Adobe Creative Suite, Canva, Figma, or similar)., • Strong copywriting and editing skills for both digital and print., • Experience in digital paid advertising (Google Ads, LinkedIn Ads, or Meta Ads) including content and landing page development., • Familiarity with Shopify or other e-commerce platforms required., • Experience with video editing (Premiere Rush, CapCut, Canva Video, or similar)., • Knowledge of or interest in AI-driven marketing tools (ChatGPT, Jasper, MidJourney, etc.)., • Familiarity with web content management systems (WordPress, Wix, etc.)., • Experience with email marketing platforms (Mailchimp, HubSpot, Constant Contact, etc.)., • Photography skills (basic product or event photography)., • Experience in B2B or government/industrial marketing preferred., • Bachelor’s degree in Marketing, Communications, Design, or related field preferred.Why Join SCI?, • Opportunity to shape the marketing function at a growing company with government and commercial reach., • Be part of a culture built on Operational Excellence, continuous improvement, and innovation. Safety It is SCI’s policy to require safe operations and practices from all employees and to ensure our management team focuses on maintaining a safe working environment even while working in hazardous work environments. Appearance Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Ability to lift equipment/items weighing up to 25 pounds, • Long periods of sitting or frequent attendance at meetings at different locations in the building, • Regularly required to talk and listen to others AAP/EEO Requirements Standard Calibrations, Inc. is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. #IND123

Job Description Join our innovative team to lead mechanical projects for a large-scale ambulatory care center and dental clinic. We are seeking a Mechanical Project Manager candidate to join our Field Operations team, located in Guantanamo Bay, Cuba. Initial training may be conducted state-side. Our Mechanical Project Managers are responsible for the daily supervision, direction, and coordination of all mechanical construction activities on our projects. This position will involve collaboration with our mechanical trades superintendents as well as various subcontractors and members of the RQ team. We are passionate about producing quality work, within the government's specified requirements, targeted budget, and schedule, from conceptual design to completion in support of RQ's Mission, Vision, and Values. Our Mechanical Project Managers may be responsible for managing more than one mechanical project at a time. With a competitive salary range of $130,000-$150,000, Company-provided housing for self and dependents on the island, company-provided vehicle, paid utilities, company-paid quarterly trips off island back to your home, and generous foreign income exclusion eligibility. Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, and Paid Time off. This position would require relocation to Guantanamo Bay, Cuba, a valid passport, and in-depth background screening. Don't miss this exceptional opportunity to be part of something meaningful-apply now and help shape the future of healthcare construction! • A 4-year degree in Mechanical Engineering or Construction Management is preferred. A high school diploma or GED is the minimum formal education required for this position., • Courses in project management, construction management, mechanical trade school, BIM and CADD, etc. preferred., • Five or more years work experience as a Mechanical Project Manager responsible for numerous projects and sizes (of the mechanical scope) of at least $5,000,000 (commercial/government) required., • Government, military, or large commercial construction experience preferred. Work in the design-build industry is highly desirable., • Demonstrated track record of managing projects in medical centers, dental facilities, or other healthcare environments preferred., • Computer literacy (Outlook, Word, Excel, and Primavera P6) preferred. Training can be provided. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description ABOUT THE ROLE Sell top food lines to customers to drive business and commissions for company by completing timely reporting of activity in the “Game Changer” so it reflects accurate call reporting and results for CRM objective planning. RESPONSIBILITIES 1. Drive company sales by aggressively marketing and presenting manufacturers’ product lines to our customers to increase sales for the company. 2. Achieve specific KPI’s assigned using CRM to plan and properly report daily sales calls activities. 3. Call on assigned list of Large Leverage Operators (LLO’s) setting up sales presentations, building relationships and providing solutions to increase business with each customer. 4. Make weekly closures to the targets in their Objective Plan., 5. Work with distributor sales representatives on training them on our client’s products to ensure the sales of Acxion products and not a competitor’s products are being sold. 6. Build relationships with top LLO accounts and key decision makers., 7. Work trade shows to promote products to customers and increase sales., 8. Get sample products to distributor sales representatives., 9. Follow-up with accounts by either phone or email to make sure their orders are complete and to thank them for their business. 10. Track monthly objectives to make sure customer goals and objectives are being achieved. 11. Must maintain a current and valid driver’s license., 12. Perform additional duties as required. SKILLS/QUALIFICATIONS • Excellent communication skills, both verbal and written., • Ability to work independently with little supervision, to prioritize/plan your schedule., • Able to multi-task., • Able to get along with others and provide superior customer service., • Good decision and negotiating skills., • Effective time-management skills., • Maintain a high level of professionalism., • Ability to prepare and take down equipment and presentation materials for food shows. • Must be able to lift 30lbs., • Able to drive vehicle for long periods of time to and from accounts., • Able to maintain current and valid driver’s license and auto insurance in $250,000/$500,000/$100,000 increments. • Prefer college degree in business or related field or equivalent experience., • Culinary and/or operations experience preferred., • Some prior knowledge of brokerage business a plus and overall business., • Experience with Microsoft Office including Word, Excel, & Outlook., • Product and Sales Training, • Frequent on the road driving; highly concentrated mental and visual alertness., • A major portion of the day is spent talking either in-person or by telephone dealing with customer service issues. • Ability to stand for long periods of time at food shows., • Frequent up/down motion to perform duties., • Some typing, calculating or otherwise working with fingers., • Visual acuity., • Ability to hear and receive detailed information.

Job Description Job Title: Sales Specialist (Construction/HVAC) Company: Chesapeake Controls Location: Chesapeake, Virginia About Us: Chesapeake Controls is a leading provider of cutting-edge building automation solutions. Guided by our core values of commitment, accountability, and safety, we specialize in providing building solutions to clients through the sale of HVAC equipment, controls, parts, services, and energy solutions. We transform commercial buildings into smart environments operating in Hampton Roads, Northern Virginia, and Pittsburgh, PA. Position Overview: We are looking for an entry-level sales associate to join our growing sales team. The Sales Support Representative (Construction/HVAC) will play a crucial, front-line role in driving our company's revenue growth. You will be responsible for identifying, contacting, and qualifying new leads, educating prospects on our products/services, and creating sales opportunities for our account executives. Key Responsibilities: • Identify key business opportunities through cold calling, following up on technician referrals and qualifying leads., • Assist with identifying customer needs during service calls or through outbound contact., • Develop a solid understanding of HVAC systems and service offerings., • Promote and sell HVAC service agreements, repairs, and system upgrades., • Prepare and deliver quotes and proposals under the guidance of senior team members., • Follow up with existing customers to ensure satisfaction and uncover additional service needs., • Create professional sales proposals and presentation, • Support senior sales representatives with administrative or field tasks., • Maintain accurate records of customer interactions in CRM software., • Participate in trade shows and professional organizations., • Maintain monthly sales goals and forecasts., • Assist with turnover meetings to include point of contact, start dates, estimated labor and materials and any special customer requests., • Bachelor's degree in business, construction, marketing or an industry-relevant field, • Proficient with Microsoft Office and/or CRM software (training provided)., • Analytical skills, • Competitive negotiator with excellent customer service skills, • Basic mechanical aptitude and willingness to learn HVAC systems. How to Apply: Interested candidates are invited to submit their resume and a cover letter detailing their relevant experience and explaining why they are a suitable fit for this position at Chesapeake Controls is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Note: The above job description is not exhaustive and may be subject to change based on the needs of the business. For more information or to apply visit Company DescriptionAbout Us: Chesapeake Controls is a leading provider of cutting-edge building automation solutions. With a strong commitment to innovation and customer satisfaction, we specialize in providing building solutions to clients through the sale of HVAC equipment, controls, parts, services, and energy solutions. We transform commercial buildings into smart environments operating in Hampton Roads, Northern Virginia, and Pittsburgh, PA.About Us: Chesapeake Controls is a leading provider of cutting-edge building automation solutions. With a strong commitment to innovation and customer satisfaction, we specialize in providing building solutions to clients through the sale of HVAC equipment, controls, parts, services, and energy solutions. We transform commercial buildings into smart environments operating in Hampton Roads, Northern Virginia, and Pittsburgh, PA.

Job Description Lyon Shipyard is dedicated to safety, quality and offering shifts, that provide a unique work life balance. Come learn more about us! 757-622-4661 ext. 436 Lyon Shipyard is a full-service shipyard for dry dockings, repairs and fabrication. The Shipyard specializes in all types of commercial and government vessels and barges, as well as both on-site and off-site topside work, steel fabrication and emergency repairs of every kind. The company has been in continuous business for almost 100 years. Ship Fitters must have strong math skills and a good mechanical aptitude. Fitters build in-place all interior structures, hatches, doors, bulkheads, etc., to complete all the steel work in the ship. Fitters are expected to climb and work in high areas or crawl and work in cramped confine spaces and perform tasks with all kinds of working conditions in-between. A fitter will apply their skills in the shops, platens, dry-docks and onboard ships in support of, ship repair and ship overhauls. Combo, 1st, 2nd and 3rd class levels are based on proficiency, knowledge, skills and abilities. Duties and responsibilities Knowledge in burning basic use of torch/light torch); make up plating (align, fit) and knowledge of plating material (CuNi- Copper nickel, Aluminum, stainless steel) ; blueprint (reading, interpret) including sketching; tack welding; portable plasma arc; lay out access cuts and inserts; tank inspections/testing; certifications in SMAW, FCAW or FCA 1. Fitters must have strong math skills and a good mechanical aptitude, 2. Fitters build in-place all interior structures, hatches, doors, bulkheads, etc., to complete all the steel work in the ship, 3. Fitters are expected to climb and work in high areas or crawl and work in cramped confine spaces and perform tasks with all kinds of working conditions in-between, 4. will apply their skills in the shops, platens, dry-docks and onboard ships in support of, ship repair and ship overhauls, 5. Performs safe and effective use of craft related tools and equipment, including but not limited to: millers, sanders, grinders, burr motors, band saws, skill saws, saws all, come along and chain falls etc., 6. Obtain GMAW ABS ‘B’ Class Weld Certification for aluminum applications., 7. Performs basic layout of plates, materials and weldments using basic engineering sketches, drawings, and diagrams with minimal supervision., 8. Performs ship fitting functions such as but not limited to fit up of structure, cutting, sniping, sanding, grinding, prepping, tacking and the fit up of plates with minimum supervision., 9. Performs fitting operations with limited supervision using standard ship fitting equipment to accomplish fabrication and ship repair duties., 10. Monitors working environment for compliance with quality, safety, environmental and health regulations., 11. Must be willing to work with and train lower-skilled workers., 12. Knowledge in burning basic use of torch/light torch); make up plating (align, fit) and knowledge of plating material (CuNi- Copper nickel, Aluminum, stainless steel) ; blueprint (reading, interpret) including sketching; tack welding; portable plasma arc; lay out access cuts and inserts; tank inspections/testing; certifications in SMAW, FCAW or FCA, 13. Receives instructions, prints, and work orders for the job., 14. Plans details of working procedures and tools and material requirements., 15. Fabricates equipment by cutting, burning, and tack welding various metals., 16. Cleans and prepares surfaces to be welded. Sets up, assembles, and tacks weld parts., 17. Uses burning equipment to dismantle assemblies and to cut material to size and shape., 18. May be assigned to dismantle or cut up obsolete machinery, setting aside parts for scrap dealer. Competencies 1. Technical Capacity, 2. Communication Proficiency, 3. Problem Solving/Analysis, 4. Initiative, 5. Results Driven, 6. Thoroughness Work Environment Work is regularly performed in outside weather conditions, including rain and extreme heat, near moving mechanical parts and includes occasional exposure to wet and/or humid conditions and to vibration. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/ Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday. This position periodically requires long hours and weekend work. Regular and predictable on-site attendance is an essential function and a prerequisite to perform other essential functions of the position. Travel Travel is primarily local during the business day, although periodic out-of-the-area and overnight travel may be expected. Required Education and Experience 1. High school degree or equivalent, 2. Apprentice or trade school, 3. Combo Class – 7+ years of exp. in trade, 1st Class – 5+ years of exp. in trade, 2nd Class – 3+ years of exp. in trade, 3rd Class – 1+ years of exp. in trade Preferred Education or Experience Education based on requirements that are job-related and consistent with the business necessity. 1. Experience in a Shipyard/ Military setting. Additional Eligibility Qualifications • Must be able to work ALL assigned shift hours as production needs dictate., • Must be able to learn to read, interpret and utilize blueprints., • Must be able to use a variety of tools and measuring devices during this process., • Must be able to learn to cut, grind, shape, fit and tack weld steel plates., • This is an industrial environment involving extreme heights, confined spaces, physical labor and various weather conditions within a shipyard environment., • Must be able to pass Physical Agility Test., • Must be qualified to wear a respirator. AAP/EEO Statement Equal Employment Opportunity has been, and continues to be, a fundamental principle at Lyon Shipyard, Inc. It is the company's policy that opportunities be available to all persons without regard to race, sex, age, color, religion, national origin, disability, citizenship status, or any other category protected under state or local law. This policy applies to employees and applicants and to all phases of employment including hiring, promotion, demotion, and treatment during employment, rates of pay or other forms of compensation, and termination of employment. Lyon Shipyard is proud to be a drug free workplace.

Job Description Here at Global - a 1st Flagship Company (), a woman-owned small business, we are committed to Individual Accountability, Growth, Integrity, and Respect. As a leader in Marine Support Services and Emergency Management, we have proudly supported the Department of the Navy since 1964, managing, operating, and maintaining the U.S. Navy fleet in locations such as Philadelphia, Bremerton, California, and Hawaii. We are currently seeking skilled Shipfitters for a potential 5-year project in Norfolk, VA. This opportunity involves hands-on labor working at the Norfolk Naval Shipyard, offering a dynamic and fast-paced environment for experienced professionals. Note: This position is contingent upon contract award. Employment will begin only if and when the company secures the government contract associated with this role. Overview: Fabricate, assemble, and install metal structures for ship construction and repair. Responsibilities: • Cut, shape, and weld structural steel for ship frames., • Install bulkheads, decks, and foundations., • Read blueprints and technical drawings., • Active DoD Secret clearance required., • 4+ years of shipfitting experience, with at least 2+ years on Navy Ships., • Completion of a formal trade training program (trade school, military training, apprenticeship, or equivalent) required., • Strong metal fabrication skills., • Ability to work 1st, 2nd and 3rd shift. Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, or status as a qualified individual with disability. As a federal contractor all employment offers are contingent on passing a pre-employment background check and drug screen. Job Posted by ApplicantPro

Job Description ITAC serves Process & Industrial clients with integrated engineering and construction services for complex capital projects. We also offer specialty services including power systems services and products, custom machine fabrication, and fall protection services and equipment. Founded in 1988 on a dream and a $5K loan, ITAC is a true success story. From humble beginnings to an ENR-Ranked Top Design Firm with a nationwide footprint and over 450 employees operating from 6 offices in Virginia, North Carolina and South Carolina, we provide Fortune 500 companies with innovative design-build solutions. We specialize in power generation & utilities, chemicals, food & beverage, forest products, advanced manufacturing, and minerals & metals. ITAC’s purpose is to make life better. For our employees, this means providing them with the resources and flexibility they need to have both a rewarding career and a fulfilling family life. ITAC is 100% employee-owned. Through our Employee Stock Ownership Plan (ESOP) and Direct Stock Ownership, every team member has the unique opportunity to be an owner who shares in the company’s growth and earnings. We offer our team a comprehensive benefits package and numerous employee incentives. Rooted in love, we serve and care for our employees like family. We hire passionate and motivated people with an innovative mindset and the desire to grow. If the thought of challenging, fast-paced projects excites you, then you’ve come to the right place. At ITAC, you’ll be part of a collaborative team that works hard to make life better. For more information, visit itac.us.com. JOB DESCRIPTION • Responsible for knowing all aspects of client and project safety requirements and for enforcing them throughout their jobsite., • Ensure a safe workplace is established and maintained., • Ensure efficient usage of manpower, material, and equipment., • Coordinate the day-to-day activities of all direct-hire and subcontracted labor., • Ensure subcontractors are working to the current project schedule, and that subcontractors are productively executing their work., • Ensure all standards are met or exceeded., • Coordinate the completion of any punch list items., • Strive for “Zero Punch List”., • Establish a positive relationship with the owner’s representative., • Documentation of daily Procore progress reports including photographs, file meeting minutes from all job site meetings, and highlight information that may affect project cost, schedule, or quality to the Project and/or Construction Manager., • Anticipate and avoid potential cost and schedule impacts., • Develop an understanding of the project scope and requirements., • Work with the Project and/or Construction Manager to develop the detailed schedule control reporting documentation., • Along with the Project Manager, develop a close-out and turnover plan., • Develop a detailed project execution plan., • Assist in the preparation of proposals., • Participate in the presentations of proposals to potential clients., • Install electrical distribution equipment: switchgear, panels, transformers, disconnects., • Proficient with circuitry of the trade to include power and control terminations., • Terminate single and three phase equipment and devices., • Install lighting circuits. EDUCATION HS Diploma or experience equivalent EXPERIENCE • Minimum 3 years’ experience as an Electrical Superintendent is required, 7 years preferred. Starting pay at $38/hour.

Job Description We are seeking a highly skilled and experienced Program Manager to join our team. In this role, you will be accountable for the cost, quality, schedule, and performance of the LCS lifecycle project utilizing Defense Maritime Solutions Project Management (PM) methodology and ensuring the successful execution of projects from contract award to warranty closure. This position requires experience in government shipyard construction and operations, marine engineering, and a working knowledge of government contracts. Responsibilities: • Embrace and promote a culture of DMS Enthusiast. Coordinate and collaborate effectively with other DMS company members through positive engagement and mutual respect. Hold colleagues accountable to this company-wide standard for interpersonal relationships, • Coordinate closely with Engineering to resolve project-related technical issues and incorporate lessons learned., • Coordinate closely with the Field Service Team to ensure the project plan, history, all required tooling, and all other support needs are clearly identified and communicated., • Maintain appropriate interface and relations with customers, paying detailed attention to contracts and specifications to minimize risk exposure to both DMS and its customers., • Liaison between facility repair, engineering team, and subcontractors to ensure the project is executed on time and within the budgeted scope of work., • Lead Project Team and manage all aspects of project-specific engineering, equipment deliveries, installation, and commissioning., • Serve as primary project point of contact to the customer from contract award through the end of warranty, • Ensure cost control at or below budget and quality objectives are met relative to project management activities, • Ensure delivered products meet customer requirements (including military standards/specifications) as prescribed per order, • Effectively craft and document execution and lifecycle support plans for existing business opportunities to ensure sustainable execution success of all orders captured. Ensure effective turnover and communication of plans for all orders., • Ensure export compliance policies and requirements are clearly understood and followed by department personnel., • Accountable for cost, quality, schedule, and performance of each project scope in the project., • Accountable for managing projects in accordance with the Wartsila PM method and DMS procedures, • Ensure that all project documentation is in order and completed as required by contract and internal processes., • Program Management, • Project Communications Management, • Project Cost Management, • Project Procurement Management, • Project Quality Management, • Project Risk Management, • Project Scope Management, • Project Time Management, • Project Customer Relation Management, • Project Planning and its Documentation, • Document Management, • Cost Indexes and Cost Development, • Management of Project-Specific Organization, • Understanding of contracts or project governance, • Project Management certificate, • HS/GED, Trade School, or Military plus a minimum of 5 years in a related industry., • B. S. in Mechanical/Marine Engineering preferred., • PMP Certification preferred, • Familiar with marine engineering and shipboard equipment and systems., • Familiar with diagrams, blueprints, drawings, test procedures, and technical manuals., • Familiar LCS Independence Class propulsion shafting, • Familiar with direct government contracts, • Ability to read and interpret engineering drawings, • Multitasking, • Knowledge and skill in using computer software, including Excel, MS Word and PowerPoint, • Interpersonal, presentation, and communication skills, • Proficient in self-directed research/study of technical and programmatic information, • Excellent at problem-solving., • Excellent in reporting executive-level status of programmatic issues American With Disabilities Specifications – General Requirements of Employment Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb stairs; balance, stoop, kneel, crouch or crawl, talk or hear, taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities may be required by the job to include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee may be exposed to weather conditions. The noise level in the work environment is usually moderate.

Job Description SUMMARY Bering Global Solutions, a company within the BSNC family, is currently seeking a qualified Plant Operator Trainee for the BOS contract in Chesapeake, VA. Applicants will be contacted via phone or email within ten (10) business days of submittal. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. • assists one or more workers in the skilled plant operator or maintenance trades by performing specific or general duties such as: scheduled janitorial duties, scheduled tank cleaning using a fire hose or pressure washer, painting, performing planned maintenance and cleaning of plant equipment, performing plant rounds, pulling samples, assisting with laboratory duties, performing laboratory deliveries, operation of a sludge press, general grounds work when required, picking up deliveries, keeping operators supplied with materials and tools, cleaning work areas, machines, and equipment being serviced; assisting operators by holding materials or tools; and performing other unskilled tasks as directed by operators. The kind of work the helper is permitted to perform varies from trade to trade. In some trades the helper is confined to supplying, lifting, and holding materials and tools, and cleaning working areas and in others, the worker is permitted to perform specialized machine operations, or parts of a trade that are also performed by workers on a full-time basis., • Must be able to qualify, apply and take required licensing tests advancing to operator status following the required timeline set by Bering Global Solutions, all required licensing can be achieved in 2 years. Must be willing to work the assigned shifts and study approved material during down time with the operator’s approval. Advancement to operator status is a requirement and failure to do so in a timely manner can result in termination. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications • Must be able to pass a background check, • Must have a valid driver’s license and transportation, • You should possess basic tools needed to perform maintenance, • High school education or equivalent, • Must be able to pass drug screening, • 3-5 years of experience in maintenance and repairs., • Must be willing to work a rotating schedule requiring shift work., • Excellent attention to detail, • Excellent oral and written communication skills, • Ability to work in a fast-paced environment, • Ability to interface with all levels of management, • Excellent time management, scheduling, and organizational skills, • Ability to work well independently or in a team setting, • Have good knowledge of troubleshooting techniques to determine exact problems and tackle them accordingly, • Excellent ability to communicate system problems to both co-workers and management for proper understanding Facility maintenance experience with the DoD preferred. NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Lifting and carrying weights up to 50 lbs. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. The job is performed indoors and outdoors with exposure to many different types of weather. Must be able to lift 50 lbs. SUPERVISORY RESPONSIBILITIES As a condition of employment, you will be required to pass a pre-employed drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job Description SUMMARY Stampede Ventures Inc., a company within the BSNC family is currently seeking a qualified Project Manager for Norfolk/Virginia Beach, Virginia. The Project Manager (PM) is responsible for the execution and management of a full project as required by our contract with the client and managing subcontractors through project completion. In accordance with Company’s policies and procedures, and performs additional managerial responsibilities as necessary or assigned. Applicants will be contacted via phone or email within ten (10) business days of submittal. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. • Independently Plans and organizes projects and sub-projects with complexity, • Drives and monitors daily progress of project work packages and activities to meet the project schedule with project team members, • Develops a project schedule and SOV, • Provides detailed updates to project stakeholders., • Organizes and maintains project documentation and artifacts, trackers, and reports., • Manages and oversees Definable Features of Work Submittal packages with Superintendent, • Creates and implements maintenance and continuous improvement efforts to project management processes and procedures., • Engages in and actively volunteers for Continuous Improvement projects/tasks., • Must follow all required ISO procedures, comply with all work exposure EH&S training requirements, • Must be able to travel infrequently., • Miscellaneous duties assigned., • Supports overall project quality and reviews all trade contractors’ means and methods in accordance with project contract documents with the Project Superintendent., • Reviews and analyzes submittal data on the product specifications, scopes of work, plans and engineer reports to determine the finished product meets the quality and reliability expectancy of the Client., • Develops the RFI process to ensure that all RFIs are properly and timely logged and that the information requests are reviewed and then forwarded to the appropriate people., • Supports testing programs will be conducted throughout construction to verify that all materials and installations are as specified; in addition to mandatory "milestone" inspections or tests, supports the QC who monitors all aspects of the construction on a daily basis to verify contract compliance., • Oversees plans, coordination, and the project program as designed, to ensure continuous production of projects are consistent with established standards, • Performs random project site audits for all stages in production process and inspects materials for specifications and contract compliance., • Interacts effectively with the NAVFAC Quality Control personnel to ensure, • Previous Federal construction experience is preferred QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required (Minimum Necessary) Qualifications • Seven years’ experience supporting Federal or commercial projects, • Must be US Citizen Knowledge, Skills, Abilities, and Other Characteristics • Operate in Microsoft Suite Tools, • Manage Project Schedule in MS Project and P6, • Valid Driver’s License, • Knowledge of Local vendors and subcontractor companies., • USACE Quality Control Certification, • OSHA 30 Certification (can be obtained after employment), • Current or ability to get a security clearance is preferred, • Current certifications for First Aid and CPR NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; most of time is spent sitting in a comfortable position with frequent opportunity to move about. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. • Requires the ability to see, hear, and verbally communicate with co-workers and clients in an office setting and active construction site., • While on-site, conditions may require walking on uneven ground, extended periods of standing, and the possible lifting, pushing, or pulling of items weighing up to 40 pounds. As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job Description Are you looking for a rewarding career in the construction industry? RQ Construction is quickly becoming one of the key players in the DoD construction space with projects throughout the Southeast and Mid-Atlantic regions. We are looking for dynamic individuals who are passionate about collaboration, teamwork, and bringing innovative ideas to the table. Our projects are meaningful, and directly impact the Military communities we serve, and we are looking for Mechanical Project Managers to support the mechanical functions of those projects. Our Mechanical Project Managers are responsible for the daily supervision, direction, and coordination of all mechanical construction activities on our projects. This position will involve collaboration with our mechanical trades superintendents as well as various subcontractors and members of the RQ team. We are passionate about producing quality work, within the governments specified requirements, targeted budget, and schedule. As a company, we have a very important mission and that is to provide our customers the best built environment in alignment with our vision and values- Safety, Ethics, Innovation, Discipline, People, and Teamwork. RQ is passionate about our people and providing sustainable opportunities for our employees and their families. We offer a competitive salary, benefits (including medical, dental, & vision), 401k with match, and employer paid life insurance. *We currently have opportunities for Mechanical Project Managers in the Kings Bay, GA area, and although local candidates are preferred, we are also open to providing relocation. Qualifications include: • A 4 year degree in Mechanical Engineering or Construction Management is preferred. A high school diploma or GED is the minimum formal education required for this position., • Courses in project management, construction management, mechanical trade school, BIM and CADD, etc. preferred., • Five or more years work experience as a Mechanical Project Manager responsible for numerous projects and sizes (of the mechanical scope) of at least $5,000,000 (commercial/government) required., • Five or more years (or equivalent) field or trade work experience with mechanical systems highly desirable; government, military, or large commercial construction experience preferred. Work in the design-build industry is preferred., • Computer literacy (Outlook, Word, Excel, and Primavera P6) preferred. Training can be provided., • Specific software literacy (BIM) preferred. Training can be provided. Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We now have a national presence spanning coast to coast. We are a full-service Design-Build company. We offer management of projects throughout the United States, with our field operations' team members who work on location for each of our projects. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense (DoD) market. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description At HCEA, our Branch Managers are considered the keys to our long-term success. This exciting and dynamic position requires excellence in five key competencies: • Business Development: Primary focus is to strategically capture and maintain profitable revenue streams for your branch. Establish and maintain effective relationships with local client base with particular emphasis on Architects, Civil Engineers, Commercial & Residential Developers, General Contractors, Health Care & Educational Institutions; Participate in networking events, trade shows, and local community organizations; Gather competitor information and market intelligence., • Client Management: Enhance our client satisfaction ratings by providing thorough, professional service and maintaining continuous communications to build long-term relationships., • Operations Management: Lead all day-to-day branch operations, including direct supervision of project management, dispatch, laboratory, administrative, and support staff. The primary focus of this Branch is Geotechnical Engineering and Construction Materials Testing (CMT) and inspection., • Quality Control: Oversee the technical excellence of all branch service providers and ensure that the highest levels of quality and integrity are the standard deliverable to our clients., • Solid Management/Leadership skills to interface with Staff, Management, and Clients, • Experience with strategizing, managing, and growing an internal team of professionals as well as creating and maintaining business relationships, • Excellent oral and written communication skills., • Minimum of 10 years' experience in the Construction Industry with an emphasis on management and/or quality control., • B.S. Civil Engineering or similar. Hillis-Carnes Engineering is an Equal Opportunity Employer Women and Minorities are encouraged to apply. Job Posted by ApplicantPro

Job Description Job Description SOUTH BAY SANDBLASTING & TANK CLEANING, INC. is a local Norfolk, Virginia shipyard related subcontractor looking to hire General Laborers - Non-Skid. Job Summary Position performs routine physical labor; moving materials, tools, and/or equipment; cleaning equipment, machinery, and work areas. May be required to perform additional duties as deemed necessary by the supervisor for the completion of the job in a safe and timely manner. Must be local in Norfolk, Virginia, we are not looking to relocate candidates at this time. Responsibilities: • Performs various physical duties as assigned, • Use proper PPE, • Moves, secures, installs, builds, loads, or unloads materials, • Performs some specialized tasks which may require on-the job training, • Effectively using heavy and light equipment, depending on the jobsite/assignment, • Moves items from place to place, according to direction from the site supervisor, • Moving tools, equipment, or other material as directed in plans or by supervisor, • Implement and follow the company's safety, quality, and environmental policies Qualifications: • Ability to read labels, safety warnings, and guidelines, • Attentive to detail and alert always to ensure safety, • Able to receive and follow instructions and communicate with co-workers, • Ability to safely operate various vehicles and equipment, • Previous experience, especially in particular industry, preferred Education Requirements: • High school diploma or GED, B.A., Technical/Vocational trade school, or apprenticeship Working Conditions and Physical Demands: • Must be able to climb up and down ladders and gangways, work aloft while wearing fall prevention equipment, • Ability to lift up to 50 pounds and carry the same for short distances and up and down stairs and steep inclines, • The work requires long periods of sitting in awkward positions, standing on a variety of surfaces and at differing angles, bending over, crouching, and climbing up and over obstructions such as scaffolding, ladders, and internal barge and boat structural members. Other requirements: All positions require a pre-employment medical test. This employer participates in E-Verify. Must be able to qualify for DBIDS security clearance. Ability to read technical English is a must. U.S. Citizenship is preferred (for some work locations it is required). Must be authorized to work in the U.S. To respond to this ad, you: Please respond to this ad on our website: Women, veterans, and their spouses are encouraged to apply. We are an Equal Opportunity Employer. EEO/AA M/F D/V Job Type: Full-time Job Posted by ApplicantPro