Trabajos design en New Jersey - Page 9

Job DescriptionDescription: We are seeking to fill the position for a machinist professional with tool and die experience. The position will involve working in a production remanufacturing facility in multiple levels as part of the production team, with strict deadlines, and will be capable of working independently as well as part of a collaborative team. The essential duties include manufacturing and ensuring the quality of machined parts, tools and assemblies, and fixtures, and verifying that all material specifications are being accurately met. Job Responsibilities: • Manual milling, manual turning, OD grinding, surface grinding as well as secondary/finishing work, • Study specifications, such as blueprints, sketches, or descriptions and visualizes product to make recommendations for continuous improvement., • Must be able to fit and assemble parts to make and repair shafting, jigs, and fixtures, and hydraulic assemblies, applying knowledge of tool design and construction, shop mathematics, metal properties, lay out, machining and assembly procedures., • Machining of complex parts in small lots., • Follow all safety procedures while operating machine tools., • Ability to lift machined parts manually and position and hold them on surface plate or worktable using devices such as vises, V-blocks, and angle plates., • Report unusual problems or conditions to supervisor., • Observe company safety rules and regulations., • Basic mechanical skills needed., • Perform, as assigned, other similar or related duties., • Ability to lift/push/pull at least 50 pounds, with or without reasonable accommodation., • Ability to work occasional weekend shifts., • Ability to work overtime as required., • Willingness to wear personal protective equipment, for example: safety glasses, gloves, ear plugs, and safety shoes.Requirements: Requirements • 5+ years of production and/or small lot machining experience., • Proficiency in various machining operations., • Must have the ability to work from prints and sketches and understand dimensions and required tolerances., • Candidate must be familiar with a variety of materials, steels, bronze, aluminum, etc., • Strong experience reading and understanding measuring instruments; micrometer, caliper, inside micrometer.

Job DescriptionDescription: The Sub-Investigator will serve as a key member of the clinical research team in a clinical trial setting. As an advanced practice medical professional, you will be responsible for ensuring the highest standards of patient care throughout the clinical trial process. Your primary role will involve conducting physical examinations, interpreting lab test results, overseeing patients’ health, and performing essential clinical procedures while working closely with other healthcare professionals. You will be expected to provide both direct medical care and education to patients, as well as contribute to the advancement of clinical knowledge through research and professional collaboration. Key Responsibilities • Perform physical examinations and assess patients’ medical histories in a clinical trial setting., • Interpret and analyze lab test results to monitor patient health and make clinical decisions., • Oversee and monitor patient health status throughout the trial, ensuring patient safety and compliance with protocol requirements., • Educate patients and their families on the clinical trial process, including treatment plans and potential risks., • Administer medications and oversee the safe administration of investigational products, ensuring adherence to clinical protocols., • Perform venipuncture and phlebotomy procedures for laboratory testing as required by study protocols., • Prepare, initiate, and monitor IV infusions (including investigational product infusions), ensuring safe administration, accurate documentation, and appropriate patient monitoring., • Conduct medical procedures such as IV line placement, injections, and other tasks as required by the study protocol., • Monitor and provide safety observations during and after medication or infusion administration to ensure patient well-being and manage any adverse reactions., • Collaborate with the Principal Investigator and other members of the clinical trial team to ensure effective execution of study protocols., • Ensure proper documentation of clinical data in accordance with regulatory and ethical standards., • Maintain a clear, open line of communication with other healthcare professionals to ensure integrated, patient-centered care., • Participate in regular meetings and discussions to review patient progress, study outcomes, and other relevant clinical findings. This job description includes core responsibilities but is not limited to the items listed above. The Sub-Investigator may be assigned additional duties as necessary to support the clinical trial and research efforts. These may include, but are not limited to, assisting in protocol design, supporting regulatory submissions, mentoring junior staff, and participating in educational and research initiatives. Requirements: License/Certification Requirements • Nurse Practitioner Medical License or, • Proven experience in a clinical or healthcare setting, with a focus on patient care and medical research., • Strong phlebotomy and IV infusion skills, with demonstrated competency in patient monitoring during and after procedures., • Strong problem-solving skills and the ability to make sound clinical decisions., • Excellent communication skills, with the ability to effectively interact with patients, families, and other healthcare professionals., • Detail-oriented with a commitment to accuracy in medical documentation and patient monitoring., • Team player with a positive attitude and dedication to advancing clinical knowledge and patient care., • Previous experience in clinical trials or research settings., • Familiarity with regulatory guidelines and ethical practices in clinical research., • Ability to educate patients and staff on clinical protocols and research procedures.

Job Description Do you love problem-solving, mastering new tech, and making clients' lives easier? South Jersey Techies is looking for their next Level 2 Support Technician. The Level 2 Support Technician will be the go-to tech for escalated tickets, server management, and networking support. This is an in-person role based in Marlton, New Jersey. We'll Provide: * Collaborative company culture with opportunities to grow and learn. * Salary of $60-70k annually. * Health insurance, PTO, and retirement with company match. What You'll Do: * Provide support to end users as an escalation point for service tickets. * Troubleshoot complex IT issues — remotely and onsite — with confidence and creativity. * Configure and maintain Windows servers, Microsoft 365, cloud environments, and firewalls. * Assist with client onboarding, system upgrades, and migrations. Skills You'll Need: * 3-5 years of IT support experience. * Experience working in an MSP. * Strong technical skills with Windows Server and Desktop operating systems, including Windows and macOS. * Experience managing Windows Server 2016/2019/2022, and supporting server based and specialized business applications, including accounting (QuickBooks, PCLaw, Peachtree), inventory management, document management, transcription/dictation tools, and CAD/design software. * Experience with backup and recovery solutions, including cloud backup, Windows backup, and server replication. * Experience with wired/wireless networks and advanced networking protocols including DNS, DHCP, VPNs, VLANs, WAN/LAN TCP/IP. * Understanding of firewall appliances, including deployment and configurations. * Strong skills in installing, activating, and troubleshooting the Office software suite. * Ability to manage client account information and documentation within business systems. * Ability to work a 1st or 2nd shift (till 8pm) schedule as needed, preferred. Ready to apply? Quick apply with your resume OR Get a head start on the application process through our online portal here:

Job DescriptionNDI Engineering Company is seeking a Structural Engineer to support the design of US Navy test facilities. The ideal candidate will have experience in design of steel and concrete structures in accordance with American Society of Civil Engineering (ASCE) standards and American Institute of Steel Construction (AISC) design manuals and demonstrate an attention to details. A Professional Engineering license is preferred. Experience with structural analysis programs such as STAAD.pro is a plus. Job Responsibilities • Review design requirements and establish design criteria., • Develop design sketches for arrangement of structures and connection details., • Develop structural calculations by hand or with computer analysis program to demonstrate code compliance., • Develop design reports documenting the suitability of designs against requirements., • Review and check engineering drawings of structures., • Communicate with others on the project team and with the customer’s technical personnel.Minimum Requirements, • Must be a US citizen and able to qualify for a DoD Secret clearance., • Must possess a Bachelor of Science degree in Applied Mechanics or Civil Engineering., • Have 3 years of professional experience in civil and structural engineering. This shall include 2 years of experience with new construction projects., • Work in the NDI office is required; however, work schedule flexibility is provided., • Have strong verbal and written communications skills. NDI Engineering Company is a privately-held small business consulting firm. NDI provides engineering and technical services to Government clients chartered with responsibility for the defense of our country. NDI offerings include naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified Quality System and was a prior recipient of the U.S. Small Business Administration Region II, Prime Contractor of the Year Award. NDI's corporate office is located in Thorofare, NJ with additional offices at the Naval Business Center, Philadelphia, PA, and Virginia Beach, VA. NDI Engineering Company is an Equal Opportunity Employer. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status Powered by JazzHR HR0TYkV2mT

The Customer Service Supervisor is responsible for supervising the service department employees and processes at assigned branch locations, this includes responsibility for executing standard processes to provide a seamless customer experience through the service coordination function. This role will hold responsibility for exercising independent judgment in the direct supervision of Service Technicians and Customer Service Representatives. Is responsible for influencing customer satisfaction with service by continuously improving branch efforts of service lead-time, first time completion rate, average days to complete service, and service CES metrics. Is the primary expert used in resolving escalated field service concerns and in proactive education and training for both customers and the internal team members. Has heavy contact with customers, contractors, installers, vendors, sales reps, and all other internal departments in the coordination of service activities. Responsible for assisting in the identification, development and implementation of programs, policies and procedures that support total customer satisfaction, company profitability and market share growth. This is an onsite position that works at the Parsippany NJ office Monday - Friday. The targeted pay range for this role is $75,000 - $90,000. The total compensation package for this position also includes applicable incentive compensation, such as an annual bonus. Actual compensation packages are based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, specific work geography, as well as internal equity and alignment with market data. As a member of the Pella Family of Brands, you will be eligible for company sponsored benefits that include healthcare, dental, vision, paid vacation, a generous 401(k) plan with company match, tuition assistance, 9 paid holidays, 20 paid vacation days, and much more. Responsibilities/Accountabilities include the following but are not limited to: • Ability to manage and support multiple teams/functions, including union and non-union team members., • Responsible for the direct supervision of service department team members as assigned. This includes, but is not limited to, selection, training, performance evaluation and development, skill assessment, discipline, attendance, performance, professional issues and payroll reporting, overtime scheduling and all other misc. items that are involved in supervising this group., • Coach and mentor team while setting clear and timely expectations to ensure performance metrics and behaviors are met., • Conducts regular one on one conversations as well as mid-year and year end performance evaluations to promote ongoing professional growth and development., • Exhibits excellent verbal and written communications skills, organizational skills with attention to detail and the ability to provide support and develop team members to handle escalated issues professionally., • Assists in the development and implementation of processes that ensure consistent and professional product service to all our customers that is both an effective remedy to customer concerns and an efficient use of internal resources., • Responsible for the identification, development and implementation of programs, policies and procedures which support total customer satisfaction, both internally and externally, where applicable in relation to this position. Identifies opportunities to update and improve customer experience procedures and makes recommendations to leadership., • Establish and maintain a working knowledge of products, systems, processes, and resources to support a team of assigned customer experience representatives to ensure compliance with company guidelines and quality of service., • Analyzes data to help determine potential future business needs., • Provides input and may prepare initial budgetary proposals for assigned cost centers, • Demonstrates the ability to collect data, prepare reports and documents such as summaries and responses to frequently asked questions or concerns. Creates executable plans based on findings., • Responsible for influencing customer satisfaction and sales growth by creating an experience for our customers that exceeds their expectations in professionalism, helpfulness and ease., • Assists in evaluating and implementing new and creative ways to more efficiently provide product service to our customers. This includes initiating and supporting continuous improvement efforts throughout all areas of responsibility., • Utilizes technologies relevant to creating logistical efficiency and continually searches for new ways to utilize technology in process improvement., • Frequent one-on-one contact with customers, branch sales force, vendors and all internal departments to oversee efficiency and customer satisfaction throughout the organization., • May serve as key member for company's Safety Program. Participate and facilitate meetings, design policies and procedures, enforce safety policies and procedures, conduct safety audit tours, provide accident analysis and trends, accident statistics and reports., • Ensures proper credit is received from Pella Corporation and outside vendors for all warranty items., • Manages a fleet of company service vehicles and their equipment., • Responsible for managing all service parts, which includes maintaining the appropriate levels of service stock inventory. Additional responsibilities: • Daily timecard review, allocations and timely approval for hourly team members., • Inputting of daily metrics., • Inputting and communicating weekly/monthly metrics. This will require some metrics to be shared with other departments., • Performing quarterly performance reviews with the team., • Preparation of PowerPoint slides and presenting them at quarterly team meetings., • Approving invoices in a timely manner., • Approving expense reports., • Ordering technician’s uniforms bi-annually., • Managing the phone system to skill employees, monitoring CSR calls for quality assurance and shutting down the phones for holidays., • Daily monitoring of pick tickets and dispatcher console route for efficiency, accuracy and last-minute changes., • Blocking Salesforce dispatcher console calendars for time off requests and adding load time and holiday blocks., • Monitoring and enforcing any active recalls on product., • Scheduling opportunities for ongoing training opportunities for the service team members., • Resolving customer escalations., • Overseeing and enforcing quality alerts., • Documenting notable behaviors of team members. Skills/Knowledge: • Must be able to develop a high-level understanding of all Pella products and their applications., • Must have problem solving abilities and the ability to think on his/her feet in order to appropriately resolve urgent service situations that arise in the general course of business., • Demonstrates open communication and the ability to always maintain professionalism., • Works collaboratively and creates a sense of trust and reliability with internal team and customers., • Demonstrates a strong work ethic, flexible about hours, responsive to customer needs, and willing to be available., • Seeks out internal experts and utilizes their knowledge., • Supports change and innovation within organization., • Focused on details and follow through., • Proficiency with Microsoft Office and smart devices, and ability to learn internal software programs and applications. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience Bachelor’s degree from four-year college or university; or three to five years related experience and/or training, or equivalent combination of education and experience. Previous experience in a supervisory role required. Language and Communication Skills Excellent verbal and written English language skills are required as well as good public relations, public speaking, instructional/teaching, and customer service skills. Ability to effectively present information to others, gather information from others, and respond appropriately to questions from employees, managers, co-workers, agents, customers, and the general public. Must be able to resolve conflict in the best interests of the business and our customers. Must display excellent phone and email etiquette, and the ability to communicate in a professional manner. Computer Skills Strong understanding of Microsoft Word, Excel, PowerPoint. Comfortable using Salesforce and can easily learn all internal ordering or product information systems and the various phone systems. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions. Must be available to work evenings and weekend as necessary. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions.

Opportunity Description Our client is seeking a temporary Graphic Designer to join their Marketing team. This individual will be involved in the creation of graphics including product promotions, web graphics, packaging, social media pieces, and more. The Graphic Designer will work closely with all departments across the organization to develop content to meet their needs. The ideal candidate is a creative individual who has the ability to match work with the brand of the Company They are also a self-starter who is capable of adhering to deadlines and has a passion for turning ideas into a reality. Job Duties • Collaborate with teams across the organization, establish their needs, and conceptualize graphics to meet their desires, • Complete projects from creating a concept to presenting the final product, • Work with a wide range of media, including photography and computer-aided design, • Determine style, technique, and medium for promotion strategies, • Implement brand authenticity in all design work, • Design multimedia and print work for color street promotions, advertisements, and social media pieces, • Keep with current trends in the same field by conducting the necessary research., • Coordinate production activities with printers, advertisers, and vendors and reviews the quality of the final product before release. Skills & Experience Required • Bachelor’s Degree in related field, • 3 years of experience in Graphic Design, • Proficiency in Adobe InDesign, Illustrator, and Photoshop, • Time management skills & ability to work under pressure, • Good verbal & written communication skills, • Attention to detail, • HTML/CSS knowledge a plus, • Comfortable juggling multiple tasks while adhering to deadlines, • An ability to produce creative work, • Have a strong understanding of design, • An ability to communicate how creative ideas translate across multi-media channels, • Can self-manage, while also having a team-oriented mindset

Proven experience in software development including front-end Angular web development and iddle-tier Java Spring Boot API development. Experience with FAA systems, federal modernization efforts, or mission-critical software developement environments. In this role, you will design, build, and evolve

In this role, you will design, build, and evolve complex software solutions that support the safety, reliability, and modernization of the National Airspace System. Support technical design and architecture for complex software systems. Translate business and technical requirements into scalable, ma

Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description As a Senior Project Engineer at Doka USA, you will be responsible for overseeing the planning, execution, and management of formwork projects from conception to completion. Leveraging your expertise in structural engineering, project management, and leadership, you will collaborate with cross-functional teams to deliver high-quality formwork solutions that meet project objectives, adhere to safety standards, and exceed client expectations. This will be an in-person role based out of our Kenilworth, NJ branch and will report into our Engineering Manager. Responsibilities: • Lead the planning and execution of formwork projects, including scheduling, resource allocation, and budget management, to ensure timely and successful project delivery., • Conduct comprehensive site assessments and feasibility studies to determine project requirements, constraints, and risks., • Develop detailed project plans, schedules, and budgets, and monitor progress against key milestones and deliverables., • Coordinate with internal teams, subcontractors, and suppliers to procure materials, equipment, and resources required for project execution., • Provide technical expertise and guidance to project teams, resolving complex engineering challenges and ensuring compliance with design specifications and regulatory requirements., • Conduct regular site inspections and quality audits to assess workmanship, safety practices, and adherence to project plans and specifications., • Manage client communications, addressing inquiries, concerns, and change requests in a proactive and professional manner., • Prepare and review engineering drawings, calculations, and documentation, ensuring accuracy, completeness, and compliance with industry standards and regulations. Qualifications • Bachelor's degree in Civil Engineering, Structural Engineering, or a related field., • Professional Engineer (PE) certification is required with the ability to stamp within the state of Texas., • Proven experience in project engineering and management within the construction industry, with a focus on formwork-related projects., • Strong knowledge of structural engineering principles, construction methodologies, and building codes., • Proficiency in project management software, CAD software, and other relevant tools., • Excellent leadership, communication, and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders., • Strong problem-solving and decision-making abilities, with a focus on delivering innovative and cost-effective solutions., • Prior experience in formwork design, scaffolding, or related fields is preferred. Additional Information Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. In accordance with applicable state and local pay transparency laws, Doka USA Ltd. is committed to providing a clear and equitable compensation structure. The salary range for this position is $85,000 – $95,000 annually, which is based on a variety of factors, including but not limited to, the candidate’s experience, qualifications, skills, and geographic location. This range represents the base pay for the position and does not include potential bonuses, commissions, benefits, or other forms of compensation. Final compensation will be determined at the time of offer and in accordance with internal equity and market data If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA.

Assistant Estimator Project Manager CMA is seeking Assistant Estimator Project Manager for various construction projects from conception through completion in New York City and the surrounding boroughs. Compensation will be commensurable with the applicant’s experience. Responsibilities: • Perform take offs, create and issue bid packages, and maintain the bid list, • Create comprehensive cost estimates for a wide variety of construction projects, • Visit potential sites for suitability and associated cost, • Verify vendor and subcontractor estimates fall within the defined scope, • Assist the Project Manager by compiling all the information required to make award recommendations., • Work with the estimating and project team to buy-out the Construction Trades., • Review and comment on scopes and bid proposals, • Prepare and manage Letters of Recommendation and Letters of Intent, • Work with the PM to compose and issue meeting minutes for sub, OAC, field meetings., • Bachelor's degree in a relevant field preferred, but not required, • 1-3 years of full-time experience as a technical specialist in one or more construction and design related fields, • Must be proficient in typical construction project software including MS Office, Project, Blue Beam and Procore Job Type: Full-time Salary: $60,000.00 - $120,000.00 per year Benefits: • 401(k), • Dental insurance, • Health insurance, • Schedule:, • Monday to Friday, • Experience:, • Project management: 1 year (Preferred), • Work Location: Multiple Locations

Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description As a Project Engineer for Doka USA, you will play a crucial role in the planning, design, and execution of construction projects. You will collaborate with our clients, project managers, and construction teams to ensure the successful implementation of formwork and shoring solutions that meet project requirements and exceed client expectations. This role will be based out of our Northeast branch located in Kenilworth, NJ, and will report to our Engineering Manager. This will be an on-site position. Key Responsibilities: • Work closely with project managers and clients to understand project requirements and objectives., • Develop detailed plans and designs for formwork and shoring systems based on project specifications and structural requirements and utilize industry-standard software and tools (i.e., AutoCAD, Revit, ect.). to create accurate drawings, models, and calculations., • Provide technical expertise and guidance to project teams and clients regarding formwork and shoring solutions., • Collaborate with engineers, architects, and construction professionals to address technical challenges and optimize project performance., • Identify and select appropriate formwork and shoring materials based on project requirements, budget constraints, and site conditions., • Ensure that formwork and shoring systems comply with industry standards, building codes, and safety regulations., • Monitor project progress, identify potential risks or delays, and implement corrective actions as needed to keep projects on track. Qualifications • Bachelor's degree in civil engineering, Structural Engineering, or related field., • Proven experience in formwork and shoring design, preferably in the construction industry., • Proficiency in CAD software (e.g., AutoCAD), structural analysis tools, and project management software., • Strong analytical skills and attention to detail., • Excellent communication and interpersonal skills., • Ability to work effectively in a fast-paced, deadline-driven environment., • Professional Engineer (PE) license a major plus. Additional Information Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. In accordance with applicable state and local pay transparency laws, Doka USA Ltd. is committed to providing a clear and equitable compensation structure. The salary range for this position is $60,000 – $70,000 annually, which is based on a variety of factors, including but not limited to, the candidate’s experience, qualifications, skills, and geographic location. This range represents the base pay for the position and does not include potential bonuses, commissions, benefits, or other forms of compensation. Final compensation will be determined at the time of offer and in accordance with internal equity and market data If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA.

Company Overview Headquartered in Bensalem, PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company. EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Glass & Glazing, Slate & Cooper Roofing, and Waterproofing. EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards. Job Summary We are seeking a motivated individual looking to join an exciting and diverse team. This is a tremendous opportunity for an individual who wants to join a specialty contractor that performs work on many of the largest construction projects in the Northeast. The candidate must have experience in exterior envelope construction. Responsible for project scheduling, material and subcontractor procurement, construction coordination, site logistics, project change management, and budget forecasts. Position also requires customer interaction at a very high level. This position is onsite out of our Elizabeth, NJ location. Job Responsibilities • Manage all aspects of project execution including scheduling, procurement of materials and subcontractors, site logistics, construction coordination, change management, and budget forecasting., • Oversee installation of various roofing systems, including single-ply membranes (EPDM, PVC, TPO), SBS, hot-modified systems, underground waterproofing, and air/vapor barriers (both liquid and sheet-applied)., • Supervise the construction of commercial, healthcare, and educational facilities across the Philadelphia region., • Coordinate the installation of a variety of panel systems such as aluminum composite panels, insulated panels, single-skin corrugated panels, phenolic panels, and fiber cement panels., • Manage project controls across all phases—Pre-Construction, Construction, and Close-out. Responsibilities include understanding scopes and contracts, liaising between the contract and management teams, and supervising administrative, operations, maintenance staff, and subcontractors., • Bachelor’s Degree preferred., • Five (5) years of construction management experience is desired., • Strong and demonstrated attention to detail, accuracy and thoroughness., • Ability to multi-task and take direction., • Knowledge of Construction Industry, • Paid time off, • Health insurance with medical, dental and vision, • 401K eligible after 2 months, company matching after one (1) year of employment, • Performance based merit increase, • Tuition Reimbursement Program, • Company wide events This information has been designed to indicate the general nature and level of work performed by employees in this role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications. EDA Contractors is an equal employment opportunity employer and is committed to a diverse workforce. EDA Contractors does not discriminate on the basis of race, color, religion, national origin, gender, gender identity or expression, sexual orientation, age, marital status, veteran status, disability status, or any other categories protected by applicable federal or state law. Here at EDA Contractors we strive to promote and sustain a culture of diversity, inclusion, and belonging every day. For more information about EDA, please visit our website at Principals only, recruiters please don’t contact any EDA employee about this job post. No phone calls or emails will be accepted.

Job Title: Senior Software Developer Duration: 12 Months Location: Newark, NJ (Hybrid) Role Overview: Client is seeking a Senior Developer to support the Contract Automation capability within the Product Enablement initiative. This role focuses on automating contract drafting by integrating AWS Cloud, APIs, and SharePoint with OpenText Content Web Document Services (CWDS), reducing manual data entry and improving turnaround time, accuracy, and auditability. The Senior Developer will work within a legacy CWDS platform-a SharePoint-based enterprise application with custom UI components, .NET services, and deep integrations across Azure infrastructure-while supporting stabilization and modernization efforts. Key Responsibilities: • Design and develop API-based integration services (REST/SOAP) supporting automated document generation, • Implement field-level data mapping, transformation logic, validation rules, and core business logic, • Build robust error handling, logging, and monitoring to support traceability and operational support, • Support end-to-end orchestration between AWS Cloud, APIs, and SharePoint, OpenText CWDS, and upstream/downstream systems, • Contribute to process design by supporting end-to-end document generation workflows and exception handling, • Leverage AI developer assistant tools to accelerate development productivity while maintaining engineering standards, • Collaborate with Business Analysts and Quality Engineers to validate mapping logic and expected outcomes, • Support deployment, testing, and production stabilization activities Required Technical Skillsets:, • Application & UI Development, • SharePoint custom applications and integrations, • React-based UI components (including Node.js), • C# / .NET application services Cloud & Platform:, • Microsoft Azure, • Azure SQL Database, • Azure-hosted APIs and deployment pipelines Data & Integration:, • API integration patterns, • XML processing, • Enterprise Service Bus (ESB) Document & Content Management:, • OpenText Documentum and/or FileNet, • Document generation, versioning, and archival workflows Required Qualifications:, • 6+ years of experience in software engineering or integration development, • Hands-on experience implementing enterprise integrations with complex data mappings, • Experience working with legacy platforms in regulated environments

Marketplace Platform Lead Job Overview The Marketplace Platform Lead is responsible for driving the end?to?end technical architecture and implementation of the enterprise Data Marketplace platform. This role spans stakeholder engagement, architectural definition, integration design, and hands-on leadership throughout implementation. The ideal candidate is a seasoned technical leader with deep experience designing integration patterns, building scalable platforms, and guiding engineering teams through complex cross-system solutions. Key Responsibilities Lead stakeholder meetings to gather business requirements, align on platform objectives, and clarify workflows and user journeys. Conduct tool evaluations, build scoring frameworks, and make recommendations on platforms, vendors, and integration technologies. Define end-to-end Marketplace architecture, including data flows, APIs, domain models, integration strategies, and platform components. Design and lead the implementation of integration patterns, including API-based integrations, event-driven patterns, workflow orchestration, and cross-system interoperability. Develop technical designs, architectural documents, and standards for Marketplace workflows, user flows, and extensibility patterns. Provide hands-on architectural guidance to engineering teams throughout solution design, development, and delivery. Oversee technical quality, scalability, performance, and security across Marketplace components and integrations. Collaborate with product, engineering, data, and security teams to ensure compliance with enterprise data governance, privacy, and reliability standards. Lead technical reviews, drive design decisions, and ensure alignment across cross-functional stakeholders. Required Skills & Qualifications 8+ years of experience in software engineering, platform development, or technical architecture roles. Strong expertise in designing and implementing integration architectures, including REST/GraphQL APIs, event-driven patterns, synchronous/asynchronous messaging, and workflow engines. Deep understanding of distributed systems, microservices, and cloud-native solutions (Azure, AWS, or GCP). Proficiency with API design, messaging systems, and enterprise integration frameworks. Experience defining technical architecture, data flows, and workflow designs for complex platforms. Ability to translate business requirements into technical designs, user flows, and actionable engineering plans. Demonstrated leadership in guiding engineering teams through architectural decisions and implementation. Strong communication skills with the ability to influence technical and non-technical partners. Experience evaluating and scoring platforms, tools, or vendor solutions. Solid knowledge of DevOps practices, CI/CD, infrastructure-as-code, observability, and security best practices. Preferred Qualifications Experience building or leading a Data Marketplace platform. Familiarity with workflow orchestration platforms, rules engines, BPM tools, or catalog management systems. Experience with enterprise identity systems (OAuth, SAML, SSO), access governance, and data privacy frameworks. Background working with enterprise data platforms, data governance, or cross-domain integration patterns. Prior experience leading architectural governance or serving as a platform architect in an enterprise environment.

Job Title: Full Stack Engineer Duration: 6 months (Contract to Hire) Location: Newark, NJ (Hybrid 3 days/week) Summary We are seeking talented and motivated Full Stack Engineers at various levels to join our growing technology team. The ideal candidate will be proficient in both front-end and back-end development, with strong problem-solving skills and a passion for building high-quality, scalable software solutions. Key Responsibilities • Design, develop, test, and deploy full-stack applications, • Build efficient and reusable front-end and back-end systems., • Collaborate with product managers, designers, and other engineers to define and deliver new features., • Develop APIs and microservices using modern frameworks and tools., • Ensure application performance, security, and scalability., • Maintain clear documentation and follow best practices in coding and design., • Programming Languages: Java, JavaScript, Python, • Frameworks & Tools: React, Angular, Node.js, Spring Boot, Spring Batch, • Databases: DynamoDB, DB2, Oracle, PostgreSQL, • Other Skills: RESTful API development, version control (Git), CI/CD,, • Bachelor's degree in Computer Science, Information Technology, or related field (or equivalent experience)., • Proven experience in full-stack development (front-end and back-end)., • Strong understanding of software development life cycle (SDLC) and Agile methodologies., • Excellent communication and teamwork skills. Ability to adapt to new technologies and learn quickly.

The Integration Architect defines, designs, and governs enterprise integration architecture standards across AWS, Azure, Microsoft Fabric, and on-prem systems. This consultant creates scalable integration blueprints, reusable patterns, and secure connectivity frameworks that ensure interoperability, reliability, and domain-aligned data exchange. The role partners closely with domain teams, platform engineering, API management teams, and enterprise architecture to accelerate delivery while maintaining architectural integrity. • Define and maintain enterprise standards for API design, event schemas, messaging patterns, and integration of contracts., • Establish integration governance across AWS, Azure, MS Fabric, and on-prem systems., • Define patterns for ADS (Authorized Data Sources) alignment, data contracts, schema evolution, and anchor key management., • Enforce adherence to enterprise security principles, including OAuth2/OIDC, JWT, TLS, Zero Trust patterns., • Build and maintain unified enterprise integration architecture blueprints spanning cloud, Fabric, and on prem connectivity., • Create domain specific and cross domain integration flow maps, canonical API patterns, and event driven reference architectures., • Align AWS, Azure, MS Fabric, and on-prem patterns under Unified Architecture., • Develop reusable integration patterns for:, • AWS: API Gateway, Event Bridge, SNS/SQS, Lambda, Step Functions, Glue, EMR, Redshift, Lake Formation, Kinesis, AWS Batch, AWS ECR, AWS ECS Fargate., • Azure: APIM, Functions, Service Bus, Azure Data Factory (all IR types), Azure Synapse Pipelines, Azure Stream Analytics, Azure Batch, Azure Data Explorer ingestion., • MS Fabric: Data Factory pipelines, Lakehouse ingestion interfaces, Fabric Data Pipelines, Notebook-based ETL, Warehouse ingestion., • On prem: MFT, MQ, legacy services., • Provide templates for API contracts, event schemas, integration error handling, observability hooks, and resiliency patterns., • Define integration patterns incorporating ADS rules, domain ownership, and anchor key management for interoperability., • Ensure all integration patterns embed security, observability, lineage awareness, and operational resiliency., • Collaborate with data governance to ensure consistent entity resolution and cross?domain identifier mapping., • Guide domain teams in implementing target state integration architectures., • Lead or participate in architecture reviews for API designs, event models, platform integrations, and connectivity., • Recommend modernization opportunities to retire from legacy integration mechanisms and adopt event-driven/API?first models., • 8-12+ years in integration architecture, API engineering, event-driven design, or hybrid integration., • Strong hands-on expertise across:, • AWS: API Gateway, Event Bridge, SNS/SQS, Lambda, Step Functions, Glue, EMR, Redshift, Lake Formation, Kinesis, AWS Batch, AWS ECR, AWS ECS Fargate., • Azure: APIM, Functions, Service Bus, Azure Data Factory (all IR types), Azure Synapse Pipelines, Azure Stream Analytics, Azure Batch, Azure Data Explorer ingestion., • MS Fabric: Data Factory pipelines, Lakehouse ingestion interfaces, Fabric Data Pipelines, Notebook-based ETL, Warehouse ingestion., • RDBMS: SQL, Oracle, DB2, RDS, etc., • On prem: MQ, MFT, REST/SOAP services., • Understanding of ADS, anchor key management, data/domain contracts, lineage aware integration., • Experience designing event driven, API first, batch, and hybrid integration architectures.

Job Title: Business Systems Analyst/ IVR Analyst Location: Newark, NJ (Hybrid)/Fort Washington, PA (Hybrid) Duration: 12 Months Job Description: We are seeking a highly skilled and experienced Business Analyst with a background in implementing effective contact center/IVR solutions. The ideal candidate will have a proven track record in supporting AI-driven transformations in the IVR and chatbot space. This role requires a deep understanding of customer service operations, actionable business intelligence, data modeling, and governance, especially within the financial services industry. Key Responsibilities: • Experience in modernizing IVR flows into customer-centric, adaptive, and learning-oriented conversational journeys powered by AI agents., • Ability to capture and translate business needs into agentic AI-focused requirements, shifting from traditional deterministic IVR call flow logic to flexible, goal oriented conversational behaviors., • Evaluate business processes, anticipate requirements, and uncover areas for improvement ensuring strategic alignment and operational efficiency., • Develop actionable business intelligence and analytics to drive decision-making., • Lead ongoing reviews of business processes and developing optimization strategies., • Develop and implement data governance, data management, and data quality program practices and strategies., • Model business processes for Interactive Voice Response (IVR) and implement effective solutions., • Demonstrated experience in redesigning IVR systems (for self-service on the voice channel) and leveraging AI solutions in the IVR space., • Experience working in an AGILE environment., • Strong analytical skills and proficiency in data modeling techniques., • BA/BS in CS, Information Systems or Information management or Systems design., • Ability to manage complex projects and deliver results in a fast-paced environment., • Deep expertise in insurance financial engines and regulatory compliance., • Knowledge of SQL, Databases and Analytical/Reporting tools such as PowerBI/Tableau.

Job Title: Senior Software Engineer Duration: 6+ months (CTH) Location: hybrid (Newark, NJ) Summary As a Senior Software Engineer on the Retirement Strategies Technology team, you will partner with product owners, tech leads, designers, engineers and delivery professionals to deliver quality platforms and products with speed.? You will code, test and debug new and existing applications as you implement capabilities to solve sophisticated business problems, deploy innovative products, services and experiences to delight our customers! In addition to advanced technical expertise and experience, you will bring excellent problem solving, communication and teamwork skills, along with agile ways of working, strong business insight, an inclusive leadership attitude and a continuous learning focus to all that you do. Here is What You Can Expect on a Typical Day Build applications ensuring that the code follows latest coding practices and industry standards, using modern design patterns and architectural principles; remove technical impediments?? Develop high quality, well documented and efficient code adhering to all applicable Prudential standards?? Collaborate with product owners in understanding needs and defining feature stories, tech leads in defining technical design and other team members to understand the system end-to-end and deliver robust solutions that bring about business impact? Write unit, integration tests and functional automation, researching problems discovered by quality assurance or product support, developing solutions to address the problems?? Bring a strong understanding of relevant and emerging technologies, provide input and coach team members and embed learning and innovation in the day-to-day?? Work on complex problems in which analysis of situations or data requires an evaluation of intangible variables. Use programming languages including but not limited to Java, JavaScript, Springboot, Node.js frameworks? The Skills & Expertise You Bring: Bachelor of Computer Science or Engineering or experience in related fields Ability to coach others with minimal guidance and effectively leverage diverse ideas, experiences, thoughts and perspectives to the benefit of the organization?? Experience with agile development methodologies and Test-Driven Development (TDD) Knowledge of business concepts tools and processes that are needed for making sound decisions in the context of the company's business Ability to learn new skills and knowledge on an on-going basis through self-initiative and tackling challenges Excellent problem solving, communication and collaboration skills Advanced experience and/or expertise with several of the following: Programming Languages:? Java, Java Script; working in distributed systems, object oriented programming, design patterns and design methodology; JAVA services using Spring,, Microservices, multi-threading, Concurrency and parallel processing Frameworks:?Springboot, Node.js Data Store:?NoSQL or Relational Data structures; Data Streaming:?SQS, SNA Application Programming Interfaces (API): Consumption & Development; implementing service oriented architecture (SOA) patterns; Web service technologies such as APIs, REST, JSON, SQL API Management & Integration : Kong, Apigee Unit, interface and end user testing?concepts and tooling (functional & non-functional) Automated testing Accessibility awareness Software security skills?including?secure coding, web application security and ; Solid grasp of security concepts (authentication, authorization, encryption, digital signature, JWT), SSL, web service proxies, firewall, SAML 2.0, OpenID Connect, OAuth 2.0) Dev Ops Tools & Practices: Branching techniques and usage of GitHub; DevOps Software Development Life Cycle (SDLC): Monitoring and logging techniques AWS Core Services across compute, storage, DB, IAM Preferred Qualifications: Strong experience with Domain Driven Development (DDD) AWS cloud native solution development Architecture Patterns Design and critical Thinking Financial/Insurance industry experience is a must, not a plus People Leadership Experience is a plus. Experience with agentic frameworks and AI driven development tools is a major plus [Claude Code, GitHub Copilot etc]

Overview Keller is the world leader in geotechnical construction and deep foundations. With a North American presence of over 100 years, we operate as the market leader with over 50 offices throughout the US and Canada. By connecting global resources and local experience, Keller develops innovative, practical, and cost-effective solutions to geotechnical challenges. Our values of integrity, collaboration, and excellence enable us to lead the industry in providing the optimal solution for our clients. Keller is looking for an experienced Field Engineer for our Groundwater Control Business Unit based out of our Rockaway, NJ location. Groundwater Control is the center of expertise within Keller which provides the highly specialized, in-house designed, dewatering, ground freezing and groundwater treatment systems. These are techniques which are commonly required on large tunnel, heavy civil, and dam projects throughout North America. Responsibilities This Field Engineer position involves extensive travel within all of North America to gain real world construction engineering and management experience. This experience provides the highly qualified civil engineer or geologist an opportunity to learn first-hand the complex world of dewatering, ground freezing and groundwater treatment technologies. Keller is an excellent fit for a candidate who decided to become a civil engineer or geologist to work in Construction that includes a balance of design and construction management with a combination of field and office work. Qualifications BS Degree in Civil Engineering, Construction Management, Geology or Similar Sound technical knowledge Problem solving and commonsense Communication and teamwork Commercial instincts Get-it-done attitude Ability to meet hectic and changing schedules and deadlines Extensive travel up to three years Career path to office Project Manager position Additional Information Salary Range: $75,000 - $85,000 Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits: 401(k) + matching Health, Dental, Vision insurance Life insurance Company provided vehicle Paid time off (PTO) Holiday Pay Keller is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply. Equal Employment Opportunity

Overview We are authentic, professional providers of fun, focused on building a Great Place To Work For All by staying true to our mission: "Life's a Party, We're Makin' It Fun!" and "So Much Fun It's Scary!" At Spencer's and Spirit, we do the right thing always-integrity, fairness, respect, and transparency are our foundation. You will find our culture to be inclusive, passionate, resilient, and one that values differences and embraces all. One Team / One Goal We are leaders and owners of our business success. Whether it's developing new and exclusive costumes, quality testing products, or implementing technology solutions, our teams understand the value of working collaboratively to embrace change through innovation, curiosity, and thoughtfulness. We offer a comprehensive benefits package that includes: Flexible work environment Career advancement Competitive base salary Bonus opportunity Vacation, Personal, Sick and Holiday pay Medical, Dental, Vision, Disability, Life and AD&D insurance 401k with a company match 30% merchandise discount Responsibilities The Designer, 3D Texture/Surfacing with the costume design team to create PBR textures and materials for garment printing and fabrication utilizing 3D surfacing workflows; work to bridge 3D + 2D design into the real world of costumes. Work alongside the costume design team to produce high-quality PBR (physically based rendering) textures and materials for garment printing specific to costumes Leverage Substance Painter / Designer and emerging AI workflows Manage and review outsourced assets Collaborate across multiple teams and projects, adhering to the needs of the business and deadlines Qualifications Experienced 3D Texture/Lookdev artist Strong PBR (physically based rendering) fundamentals experience Hands-on experience using Substance Painter or Mari Working knowledge of a 3D software like ZBrush and CLO/ Marvelous Designer Clear understanding of color space, shading, lighting, rendering, and texture baking methods Proficient in Adobe Photoshop and Illustrator Strong organizational skills, ability to coordinate multiple projects seamlessly Strong communication skills and ability to work in a team environment Self-starter; comfortable leading the charge with projects and deadlines 3D character art experience is a plus Experience in games, toys, fashion, or other product development is a plus Required software experience: Zbrush, Substance Painter/Mari, Clo3D/ Marvelous Designer, Illustrator, PhotoshopBlender Blender, Maya, Mesh Mixer preferred The pay range reflects the potential base salary range for this role. Individual base pay is determined by various factors such as relevant experience and skills, and the scope and responsibilities of the position. Pay Range $75,000 - $85,000

Implement automation strategies to improve trading workflows (Equities, Futures, FX, Options).Compensation: 200k - 230k base + bonus.Architect, Design and Develop customizations and interfaces in Portware using Java.Interface with Traders and Portfolio Managers; collaborate with Product Owner.Provid

Overview We are authentic, professional providers of fun, focused on building a Great Place To Work For All by staying true to our mission: "Life's a Party, We're Makin' It Fun!" and "So Much Fun It's Scary!" At Spencer's and Spirit Halloween, we do the right thing always-integrity, fairness, respect, and transparency are our foundation. You will find our culture to be inclusive, passionate, resilient, and one that values differences and embraces all. One Team / One Goal We are leaders and owners of our business success. Whether it's developing new and exclusive costumes, quality testing products, or implementing technology solutions, our teams understand the value of working collaboratively to embrace change through innovation, curiosity, and thoughtfulness. We offer a comprehensive benefits package that includes: Flexible work environment Career advancement Competitive base salary Bonus opportunity Vacation, Personal, Sick and Holiday pay Medical, Dental, Vision, Disability, Life and AD&D insurance 401k with a company match 30% merchandise discount Responsibilities Spencer's & Spirit Halloween is looking for a self-motivated and driven IT manager with supply chain experience to contribute significantly to systems and process-related changes required to support our growing business model. This role will be responsible for leading a small team, while supporting current technological initiatives and help drive design decisions for our future roadmap. Responsible for managing the design of, delivering and maintaining supply chain-related systems (Warehouse Management System (WMS), 3PL scanning, Material Handling Equipment (MHE), and related integrations) that combines technology with business processes to help transform our business to the highest levels of performance Report on all activities associated with the health, performance and reliability of all servers and services utilized by the supply chain-related systems, including capacity planning, availability trending, and application performance Prioritization of all application support activities including but not limited to: 3PL data processing, logistics related EDI feeds and our Infios WMS and WCS Provide close liaison with project teams and business to ensure the smooth transition of new applications, systems and initiatives into the production environment Lead multiple simultaneous IT projects and initiatives Research and provide strategic direction on use of new products/technology including new applications, new handheld technologies and associated hardware to support deployment for the logistics team Proactive monitoring of all systems for quick resolution (during and after hours) by adhering to notification and escalation procedures Assist with annual PCI audit ensuring systems meet security requirements, along with the annual internal/external audits and remediation Other related duties as assigned Qualifications Bachelor's degree in Computer Science, Systems Analysis, Information Technology or a related study, and 10 years IT experience with a minimum of 1-2 years supply chain application management experience (WMS and WCS), or equivalent combination of education and experience Experience with Infios (Koerber / Highjump) WMS, preferred Experience managing a small team of associates, external consultants and external vendor relationships Prior experience working in a high intensity retail environment, preferred Technical proficiency and knowledge with the following: Microsoft SQL Server for query development and problem resolution Integration tools such as, scripting, ETL, and integration packages Disaster recovery planning and testing WiFi network management and support Experience using these or similar tools: Atlassian tool set (Ops Genie, Jira) Solarwinds Mulesoft Zabbix Knowledge of support systems for servers, PCs, laptops, and mobile devices Must demonstrate a proven ability to set targets and monitor achievements in delivering quality infrastructure services to users and application teams. Excellent verbal and written communications skills including the ability to present and discuss technical information in a way that establishes rapport, persuades others, and promotes understanding The pay range reflects the potential base salary range for this role. Individual base pay is determined by various factors such as relevant experience and skills, and the scope and responsibilities of the position. Pay Range $125,000 - $145,000

Residency Program Director/Medical Director Family Medicine Residency/Family Medicine Center JFK University Medical Center - Edison, New Jersey Hackensack Meridian Health is seeking an experienced, visionary, and passionate Program Director / Medical Director to lead the Family Medicine Residency Program at JFK University Medical Center. This is an outstanding leadership opportunity for a dedicated physician committed to academic excellence, clinical innovation, and the training of the next generation of family medicine physicians. Position Overview: The Program Director will provide strategic and operational leadership for the Family Medicine Residency Program, ensuring full compliance with ACGME and institutional requirements. This role is responsible for cultivating a supportive and academically rigorous learning environment, fostering faculty development, and ensuring the continued success of the program. As Medical Director of the Family Medicine Center, the selected physician will oversee day-to-day clinical operations, quality and safety initiatives, and patient care processes aligned with Joint Commission and NCQA Patient-Centered Medical Home standards. The Medical Director will serve as a role model for compassionate, evidence-based care, and an advocate for both patients and staff. Key Responsibilities: • Provide strategic leadership and direction for the Family Medicine Residency Program in collaboration with department and institutional leadership., • Oversee the design, implementation, and evaluation of the residency curriculum, ensuring alignment with ACGME milestones and competencies., • Recruit, mentor, and develop residents and faculty to foster excellence in teaching, research, and clinical practice., • Ensure continuous program improvement through data-driven assessment, scholarly activity, and adherence to accreditation standards., • Direct and support quality improvement initiatives to enhance patient outcomes, safety, and satisfaction., • Maintain clinical engagement (approximately 20% clinical time) providing high-quality, patient-centered care within the Family Medicine Center., • Oversee compliance with institutional, state, and federal regulations related to residency education and clinical operations., • Collaborate with health system leadership on strategic planning, budgeting, and staff development initiatives., • MD or DO degree with Board Certification in Family Medicine (ABFM or AOA)., • Minimum of 5 years of progressive leadership experience in graduate medical education and clinical practice., • Demonstrated expertise in curriculum development, faculty mentorship, and quality improvement initiatives., • Proven ability to lead and inspire teams, manage complex academic programs, and drive innovation in medical education., • Excellent communication, organizational, and interpersonal skills. Nancy Massa, Physician Recruiter Email: ___ Phone: 732-890-9339 (Call or Text) HMH is committed to pay equity and transparency for our team members. The minimum base salary for this position is $261,173. The posted rate of pay in this job posting is a reasonable good-faith estimate of the minimum base pay for this role at the time of posting in accordance with the New Jersey Pay Transparency Act and does not reflect the full value of our market-competitive total rewards package. The starting base salary is provided for informational purposes only and is not a guarantee of a specific offer. The base compensation determined at the time of the offer may be different than the posted base salary based on a number of non-discriminatory factors, including but not limited to: Specialization: Area of specialization and sub-specialization. Labor Market Data: Compensation is benchmarked against market data to ensure competitiveness. Experience: Years of relevant experience in the areas of specialization and sub-specialization. Leadership: Relevant experience as a department chair or chief, practice group leader, or other leadership roles. Education and Certifications: Degrees attained, residencies, fellowships, board certifications, research, and publications. Productivity: Levels of productivity, quality and patient satisfaction. Skills: Demonstrated proficiency in relevant skills and competencies. Geographic Location: Cost of living and market rates for the specific location. Internal Equity: Compensation is determined in a manner consistent with compensation ranges for similar roles within the specialty and/or sub-specialty. Budget and Grant Funding: Departmental budgets and any grant funding associated with the job position may impact the pay that can be offered. In addition to our compensation for full-time and part-time (20+ hours/week) positions, HMH offers a comprehensive benefits package, including health, dental, vision, tuition reimbursement, and retirement benefits. The final compensation and benefits package will be discussed during the interview process.

Southeastern New Jersey $100,000 SIGN ON BONUS Join AtlantiCare as Chief of Gastroenterology — Vision 2030 AtlantiCare is dedicated to revolutionizing healthcare by 2030 through innovation, excellence, and compassionate patient care. As Chief of Gastroenterology, you will design, build, and lead your program to be aligned with our Vision 2030 goals to improve patient outcomes, drive research and education through our partnership with Drexel University and foster multidisciplinary collaboration in cancer care through our partnership with The Cleveland Clinic. Vision 2030: • Patient-Centered Excellence: Deliver personalized, compassionate care tailored to each patient., • Innovation & Technology: Integrate cutting-edge surgical techniques and digital health tools., • Collaborative Care Models: Foster interdisciplinary partnerships for coordinated cancer care., • Research & Education: Lead initiatives in clinical research, education, and training., • Community Engagement: Expand access and education to underserved populations to reduce disparities., • Workforce Development: Cultivate a diverse, skilled team passionate about advancing surgical outcomes and patient quality of life. Create your team including dedicated GI hospitalists committed to excellence in advanced endoscopic surgery, as well as routine gastrointestinal care. AtlantiCare is seeking a forward-thinking gastroenterologist with a strong background in clinical care and leadership. Someone who thrives on building programs, shaping culture, while training the next generation. AtlantiCare has a robust GI referral network, and strong infrastructure. You’ll have guaranteed endoscopic time and strong volume from day one. • Develop and lead an academic division blending clinical excellence, education, and research, • Recruit, mentor, and inspire a multidisciplinary team of faculty, fellows, and staff, • Expand advanced GI services, including endoscopy, inpatient, and outpatient care, • Serve as a hands-on leader—rounding, consulting, and managing complex GI cases Why AtlantiCare? • Competitive compensation with RVU-based incentives (guaranteed during growth phase), • Access to 403(b) and 457(b) retirement plans with non-elective contributions, • Malpractice insurance with full tail coverage, • Generous CME allowance plus PTO and NJ Sick Time, • Relocation reimbursement, • Comprehensive health benefits, including medical, dental, vision, and disability, • Manageable 1:4 call schedule supported by hospitalists and Advanced Practice Providers Equal Opportunity Employer. M/F/D/V Join AtlantiCare. Enjoy the freedom to take your career in any direction and make a contribution that could change healthcare. INSPIRE. DREAM. ACHIEVE. Total Rewards at AtlantiCare At AtlantiCare, we believe in supporting the whole person. Our market-competitive Total Rewards package is designed to promote the physical, emotional, social, and financial well-being of our team members. We offer a comprehensive suite of benefits and resources, including: • Generous Paid Time Off (PTO), • Medical, Prescription Drug, Dental & Vision Insurance, • Retirement Plans with employer contributions, • Short-Term & Long-Term Disability Coverage, • Life & Accidental Death & Dismemberment Insurance, • Tuition Reimbursement to support your educational goals, • Flexible Spending Accounts (FSAs) for healthcare and dependent care, • Wellness Programs to help you thrive Join a team that values your well-being and invests in your future.

About The Role** The Principal Hardware Development Systems Engineer will be responsible for the design and development of new server platforms from concept to launch.

Following the training pipeline, Naval Reactors Engineers are then assigned a Nuclear Engineer position with the group responsible for managing all technical aspects of the Naval Nuclear Propulsion program-reviewing, approving and confirming the design, operation and maintenance of nearly 100 nuclea

Description The Leidos National Airspace Systems Integration Support (NISC) Program is seeking a Senior Level Environmental Specialist. This professional will provide support to the Federal Aviation Administration (FAA) William J Hughes Technical Center (WJHTC) in Egg Harbor, NJ. This position will support the FAA's EOSH Team. NOTE: This position will be on site 3X per week with potential for telecommuting 2 days per week. No business travel is anticipated. Primary Responsibilities: • Manage environmental due diligence across multiple programs, • Develop scopes, review findings, and provide clear directions to internal teams on environmental conditions and permitting, • Working with other team members to promote environmental compliance through construction and facility operations, including support for training and inspections, • Develop, summarize, and clearly communicate environmental obligations across multiple wide-ranging internal and external stakeholders, including design, construction, and operations teams, • Develop training regarding environmental requirements for compliance and awareness, • Project management overseeing environmentally related improvements and construction., • Communicate professionally with regulatory authorities to ensure compliance is maintained., • Manage and oversee both scheduled and unscheduled compliance inspections by federal and state authorities Basic Qualifications: • Bachelor’s degree in environmental studies, environmental science, biological sciences, environmental planning or degree in other related fields from an accredited college or university., • Must have at least (10) ten years of relevant and documented experience in the following: Environmental laws and regulations, specifically for New Jersey (NJDEP). Air emissions permitting, including Title V air permits. Calculations, monitoring, and recordkeeping for hazardous air pollutants (HAPs). Clean Water Act (CWA) regulations, including NJPDES permitting and stormwater management., • Must have OSHA 40-hour HAZWOPER certification Preferred Qualifications: • Performing risk assessment modeling, including AERMOD, CMAQ, and AirToxScreen For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job DescriptionBenefits: • KinderCare Discounts, • 12 Free CE's, • ABMP Discounts, • AMTA Discounts, • Competitive salary, • Employee discounts, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Training & development, • Tuition assistance You became a Massage Therapist to make a difference. To help people move better, feel better, and live better. You create space for healing, growth, and real results. Now youre looking for an employer that supports you the way you support your clients. At Hand & Stone Millstone-Jackson, we believe flexibility looks different for everyone. For some, it means full-time income and steady books. For others, it means working around family, school, or another commitment. Whatever your version of balance is, we help you build a schedule that complements your life not competes with it. Real Flexibility. Real Demand. We pair flexible scheduling with consistent client demand so you can build hours you can rely on. • Full-time and part-time options, • Schedules built around high-demand shifts, • Membership model that drives repeat visits, • Long-term client relationships instead of one-time appointmentsMore than half of guests request their Massage Therapist by name, and many rebook before leaving. That means stronger income consistency and less downtime. Instead of worrying about filling your schedule, you focus on delivering exceptional care. What Youll Receive • Established Client Base- Steady bookings supported by a nationwide membership model., • Education & Career Growth- 12 CE credits included with new hire training plus ongoing continuing education at no cost., • Professional Work Environment- Safe, supportive spa environment with leadership that values therapists., • All Supplies Provided- Linens, tools, marketing, and operational support handled for you., • Design customized treatment plans based on client needs, • Deliver an exceptional guest experience, • Support long-term therapeutic relationships, • Maintain professionalism and cleanliness in all treatment areas, • Active state Massage Therapist license in good standing, • Massage liability insurance, • Ability to communicate effectively with clients and team members, • Proficiency in Swedish Massage, • Additional modalities preferred but not required (training provided) Hand & Stone is a national leader in membership-based massage and spa services, with 500+ locations across the U.S. and Canada. Our Massage Therapists are the foundation of our success and we invest in their stability, growth, and work-life balance. If you are a Massage Therapist looking for consistent bookings, flexible scheduling, and long-term career support, apply today. Build your practice. Protect your balance. Make every hour count.

Job Description Are you a dedicated and motivated personal trainer looking to make a significant impact on individuals' lives? We are actively seeking exceptional trainers to join our team and deliver personalized fitness experiences in the comfort of our clients' homes. Join us and be a part of a dynamic community that values your expertise, provides flexibility, and supports your professional growth. Join Our Team of Elite In-Home Personal Trainers – Empower Lives Through Fitness! Are you a certified personal trainer passionate about making a real impact? At Svetness, we bring clients to you—so you can focus on what you do best: helping people achieve their fitness goals. Why Train with Svetness? ✅ Flexible Scheduling – Set your own hours and choose the clients you want to work with. ✅ No Non-Compete – Train where and when you want; your career, your choice. ✅ Competitive Pay – Earn $35 to $45 per hour based on experience and client retention. ✅ Bonuses & Rewards – Get retention bonuses, plus client and trainer referral incentives. ✅ Liability Insurance – You're covered under our General Liability policy for peace of mind. ✅ Dedicated Support Team – Our concierge team handles scheduling and client requests so you can focus on training. ✅ Ongoing Education – Access free webinars, resources, and manager support to enhance your expertise. ✅ Exclusive Discounts – Enjoy 30% off fitness equipment, plus perks on meal prep, supplements, and more. ✅ No Sales Required – We provide a steady stream of clients—no need for marketing. ✅ Svetness App – Manage scheduling, track progress, and log sessions seamlessly. What You'll Do As a Certified Personal Trainer, you'll provide personalized, one-on-one and couples' fitness coaching in clients' homes, apartment gyms, or outdoor locations. 🔹 Design tailored workout programs based on client goals and assessments 🔹 Demonstrate exercises and ensure proper form, adjusting as needed 🔹 Track progress using the Svetness Fitness App, including session notes and reassessments 🔹 Maintain consistency with client appointments and scheduling 🔹 Travel to client locations (up to 45 minutes commute) What We're Looking For ✔ Certified Personal Trainer – Accredited by NCCA, DEAC, or NBFE ✔ CPR/AED Certified – Up-to-date certification required ✔ Experience – 1-3 years of personal training experience preferred ✔ Strong Communication Skills – Verbal, written, and technical ✔ Basic Nutrition Knowledge – Ability to guide clients on healthy habits ✔ Fitness Expertise – Comfortable with various training methods and equipment ✔ Physical Capability – Able to lift/push/pull up to 50 lbs. ✔ Personal Training Equipment – Ability to bring basic training tools as needed ✔ Reliable Transportation – Must be able to travel to client locations We take pride in our commitment to building an environment that embraces individuals from different genders, backgrounds, and ethnicities. Our organization values diversity and encourages candidates of all gender identities, backgrounds, and ethnicities to apply. We believe in creating an inclusive space where every individual feels welcome, respected, and valued. Join us in our mission to foster a workplace that celebrates the unique perspectives and experiences of our diverse team.

Job DescriptionDescription: Job Overview We are seeking a Miscellaneous Steel Detailer to join our team. The ideal candidate will possess a strong background in drafting and design within steel construction industry. Responsibilities • Develop detailed steel shop drawings and fabrication details., • Collaborate with engineers and project managers to understand project requirements and specifications., • Maintain organized documentation of all design revisions and project files. Requirements: • Proficiency in AutoCAD, SDS2 or Tekla., • Strong understanding of steel fabrication and construction processes,, • Metal fabrication, • American Institute of Steel Construction (AISC) Standards, • Construction, • Tekla, • Construction documentation, • Project team coordination, • Construction document control, • Structural BIM modeling, • AutoCAD

Job DescriptionJob description Our company is seeking an experienced and talented full time Land Surveying Crew Chief who has experience working in all areas of land surveying. Candidate should have prior surveying experience and be proficient in the use and maintenance of survey instruments (GPS, total stations, robotics, level rods, etc.). AutoCAD knowledge a plus Candidates that can draft, calculate, and complete field work are encouraged to apply. MUST BE DEPENDABLE and able to work well with others, including taking instructions and following established procedures. Must be reliable and self-motivated. It is a requirement of this position to be detail oriented and take clear and complete field notes. Communication between the Crew Chief, the office, and other crews is pertinent. Candidates will be expected to perform all the normal and customary duties a field Crew Chief. The ability to read plans, recognize, and remedy problems in design data is essential. This position is full time, year-round and primarily an outdoor position with the opportunity t aid on the office side of the surveying business. Salary commensurate with experience. Experience in the following is preferred: • Boundaries and Title Surveys, • Topography surveys, • Elevation and Flood Certificates, • ALTA surveys, • As Built Surveys, • Construction Layout, • Preparing and calculating construction stakeout, • Preparing cut sheets, • Reviewing Drafted Plans, • Drafting We are a small company that cares about our employees and their families. Though we have high expectations regarding work ethic and production, we give every effort to ensure a work life balance. Come work for a Professional Land Surveyor who worked himself up the chain from Rod Man to PLS and loves this profession. We provide the best equipment & technology for our employees makes us more productive and efficient. REQUIREMENTS: • Capable of working at least 40 hours per week between the hours of 8 am to 5pm, • Ability to work in a fast-paced environment., • Ability to produce accurate work and be detail oriented., • Excellent English and communication skills, • Eligible to work under US Law, • Be willing to work primarily in the field and sometimes in the office., • Knowledgeable in Carlson Software and/or AutoCAD design software, • Have a valid driver's license., • Be able to lift 40+ lbsIf you feel you are a good fit for our company, please email us your resume. Job Type: Full-time Houry: $25 to $35 per hour Benefits: • 401(k), • Health insurance, • Paid time offSchedule:, • 8 hour shift, • Monday to FridayEducation:, • Associate degree or some college in a relevant field., • Someone continue their education in Land Surveying is preferred. Experience:, • Land surveying: 3 years preferred. License/Certification:, • Surveyor License not required., • Driver's License requiredWork Location: In office in Westampton, NJ and in various field locations around NJ

Job Description The Inside Vehicle Graphics Sales Specialist will be responsible for maintaining strong customer relationships and ensuring seamless coordination between sales, design, and production teams. This role requires a proactive individual with excellent communication skills and a keen eye for detail, capable of navigating complex project requirements and delivering exceptional customer service. Key Responsibilities: • Sales to Customer Relations:, • Act as the primary liaison between customers, outside sales and the internal sales team, ensuring all necessary information is accurately relayed and understood., • Proactively follow up on missing customer information (e.g., dimensions) to prevent delays in the production process., • Clearly communicate design and production limitations or non-possibilities to customers through the sales channel, managing expectations effectively., • Ensure that critical customer information and project details are consistently maintained and accessible to all relevant teams., • Production:, • Collaborate closely with the production team to understand capacity and scheduling., • Assist in managing the installation and production schedule, prioritizing projects that align with current timelines and resource availability., • Gain a foundational understanding of production processes, including time spent on tasks such as weeding, cutting, and laminating, to better inform sales and customer discussions., • Design:, • Work with the design team on file management and organization., • Inform the sales team of any design constraints or infeasibilities, such as graphics that won't fit a particular vehicle type (e.g., "graphics won't fit on an Explorer")., • Proven experience in inside sales, preferably within the vehicle graphics or signage industry., • Strong understanding of customer relationship management., • Excellent verbal and written communication skills., • Ability to work collaboratively in a team environment., • Detail-oriented with strong organizational and problem-solving abilities. EOE/Qualified applicants will receive consideration for employment without regard to disability or protected veteran status and any other applicable protected classification. Pursuant to the Immigration Reform and Control Act of 1986, all applicants who are offered employment must produce documents establishing their identity and authorization for employment in the United States. These documents must be produced no later than three (3) business days after employment commences. In addition, all new hires will be required to verify their employment authorization under oath by signing Form I-9 upon commencing employment. Company DescriptionElite Vehicle Solutions is a rapidly growing emergency vehicle upfitting company serving fleets and government agencies across New Jersey, Pennsylvania, New York, and Delaware. Built to scale with the growing needs of our expanding customer base, we are committed to delivering high-quality, reliable vehicle upfitting services for public safety and specialty fleets. We are looking for career-minded, motivated individuals who want to grow with us. At Elite Vehicle Solutions, you’ll be part of a team that values craftsmanship, innovation, and long-term professional development, with plenty of opportunities for advancement as we continue to expand.Elite Vehicle Solutions is a rapidly growing emergency vehicle upfitting company serving fleets and government agencies across New Jersey, Pennsylvania, New York, and Delaware. Built to scale with the growing needs of our expanding customer base, we are committed to delivering high-quality, reliable vehicle upfitting services for public safety and specialty fleets.\r\n\r\nWe are looking for career-minded, motivated individuals who want to grow with us. At Elite Vehicle Solutions, you’ll be part of a team that values craftsmanship, innovation, and long-term professional development, with plenty of opportunities for advancement as we continue to expand.

Job Description Van Cleef Engineering is a dynamic, multi‐disciplined firm of Engineers, Certified Inspectors, Landscape Architects, Planners and Land Surveyors. We are committed to creating a personal and professional environment where we can build and focus on helping communities through teamwork and support. Our local offices provide our employees with opportunities for professional development and growth, including our Young Professionals Group, a flexible working environment, and times to celebrate our accomplishments together. Van Cleef is proud to have been recognized in New Jersey as a Best Place to Work for 2025! Another great reason to choose to work with Van Cleef! Due to our continued growth, we are seeking a Civil Engineer - Project Manager, to join our dynamic team in our Phillipsburg, NJ office. You will be responsible for collaborating with a dedicated team of engineers and multidisciplinary services to provide technical and managerial direction and oversee the full scope of our municipal projects. As a key member of our team, you will also be responsible for managing client relationships and developing new businesses. Key Responsibilities Project Leadership: • Lead municipal engineering projects, including road rehabilitation, stormwater management, subdivision and land development reviews, and utility design, • Coordinate and manage capital improvement projects for public sector clients, • Coordinate activities related to technical developments, scheduling, and resolving engineering design and construction issues, • Assist in preparing effective work plan proposals, establish project budgets and construction cost estimates, • Monitor daily progress of projects through full project life-cycle to ensure projects are completed on schedule and within budget, • Review and approve project shop drawings, • Ensure preparation of and review all detailed engineering sketches, drawings, specifications, plans, reports, and technical documentation to support project deliverables, reviews, and client communication Client Support and Public Engagement: • Work with professional engineering consultants, governmental agencies, involved communities and contractors in connection with the planning, design, and permitting of various types of infrastructure projects, • Represent the firm at municipal planning, zoning, and land-use board meetings, • Communicate project goals and updates to stakeholders, including public officials and community members, • Review and evaluate Municipal Development Applications using knowledge of the Municipal Code of various municipalities, • Attend project meetings with clients New Business Development: Engage in marketing related proposals and programs to maintain existing clients and to pursue and develop new clients and business opportunities. Qualifications • B.S. degree in Civil Engineering, NJ PE required, • CME, CFM, and/or PP a plus, • 7+ years of progressive experience servicing private clients and/or managing infrastructure projects or designing land development projects, • Experience working in site development strongly preferred, • Experience in public testimony before Land Use Boards a plus, • Proficiency in AutoCAD and Civil 3D required, GIS and Hydroflow software experience a plus, • Knowledge of Microsoft Office (Word, Excel and PowerPoint), • Strong communication skills, both written and verbal, with ability to represent the firm in all related areas We are committed to creating a personal and professional environment where we can build and focus on helping communities through teamwork and support. Our local offices provide our employees with opportunities for professional development and growth, including our Young Professionals Group, a flexible working environment, and times to celebrate our accomplishments together. • Medical/Rx Insurance, • Dental Insurance, • Vision Insurance, • 401(k) retirement savings plan (traditional and Roth options) with company match, • Paid holidays, vacation and sick days, • Company-paid Life insurance, • Company-paid Long-Term Disability insurance, • Tuition reimbursement program (postgraduate), • Professional Licensing reimbursement, • Gym membership reimbursement $104,000 - $167,000 annually commensurate with experience. Additional Information Van Cleef is a proud Equal Opportunity Employer (EOE). We celebrate diversity and are committed to creating an inclusive environment for all employees. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability or veteran status. This position is not eligible for H1-B or any other visa sponsorship We thank all applicants; however, only shortlisted candidates will be contacted.

Job Description Princeton Day School is seeking an Upper School Spanish Teacher beginning in the 2026-27 school year. Successful candidates will be eager to help students develop the skills to communicate in the target language and will be invested in creating classroom opportunities for students to explore the Hispanic world and cultures. Candidates should be able to teach a complete range of students, from introductory level to advanced. In addition to teaching 4 sections of Spanish (2-3 preps), a full-time teacher contributes to the community life of PDS as an advisor of 6-10 students, has various duties, and is expected to contribute to school life outside the classroom in an extracurricular activity, such as coaching or clubs. One to four times a semester, a weekend or evening activity or campus event may be required. For this position, the ideal candidate is expected to: • Teach four classes/sections, • Lead an advisory, • Contribute to school life outside of the classroom, • Foster a learning environment that is student centered and that supports students' social and emotional needs, • Differentiate teaching and learning based on students' cognitive and learning needs, • Commit to using innovative teaching practices and technologies to enhance instruction, • Develop creative formative and summative experiences and assessments to evaluate student learning, • Provide opportunities for student self-assessment and engagement in the learning process, • Bachelor's degree in Spanish language, literature, history and/or culture (required), • Advanced degree in Spanish language, literature, history and/or culture (preferred), • Minimum 3 years of proven success teaching middle school or high school students, • Demonstrated experience at introductory through advanced levels, • Complete command of the language, • Strong background, beyond the language, in Spanish cultural traditions, history and literature, • Proven ability to work in a highly collaborative environment, and to communicate and lead through strong interpersonal skills, • Instructional design, curriculum development and assessment experience (developing, delivering, and assessing) At Princeton Day School, offering a comprehensive and competitive benefits package is one way we recognize our employee's contribution to the success of the school and our role in helping our employees and their families be healthy, feel secure and maintain work/life balance. Full-time and part-time employees who are regularly scheduled to work 30 hours or more per week are eligible for PDS' competitive benefits package that includes medical, dental, and vision insurance as well as a generous 403(b) match, paid time off, and many other valuable benefits. Princeton Day School is the region's premier independent day school for students from Pre-K through Grade 12. We aspire to create a diverse, equitable and inclusive community in which all members are seen, challenged, affirmed, respected and valued. Nestled on a picturesque 106-acre campus just two miles from Downtown Princeton and with a history dating back to 1899, PDS provides students with unparalleled opportunities for discovery, exploration and innovation and seeks employees who are passionate about their work and who embrace the importance of lifelong learning. Qualified candidates should submit the following to be considered: • Resume, • Cover Letter, • Statement of educational philosophy, • Three (3) professional references

Job Description Sr. Civil Engineer – Municipal Infrastructure & Project Leadership Join a multidisciplinary team delivering high-impact municipal infrastructure projects. Lead major initiatives from proposal through construction, guiding engineers, collaborating with public sector clients, and representing the firm at board and community meetings. What You'll Do • Manage full project lifecycle for municipal engineering projects including road rehabilitation, stormwater management, subdivisions, land development, and utility design, • Oversee capital improvement projects for public sector clients, ensuring projects are completed on schedule and within budget, • Develop project work plans, budgets, and construction cost estimates, • Review and approve project plans, shop drawings, specifications, and technical documentation, • Coordinate technical developments, scheduling, and resolution of engineering and construction issues, • Represent the firm at municipal planning, zoning, and land-use board meetings, • Communicate project updates to clients, public officials, and community stakeholders, • Mentor and develop junior engineers, providing technical skill development and professional growth opportunities, • Support business development through client relationships, proposals, and pursuit of new opportunities What You Bring • B.S. degree in Civil Engineering; NJ PE required, • 6+ years of progressive experience managing municipal infrastructure or land development projects, • Site development experience strongly preferred, • Proficiency in AutoCAD and Civil 3D; GIS and Hydroflow experience a plus, • Knowledge of Microsoft Office Suite, • Strong written and verbal communication skills, • Ability to represent the firm effectively in public and client-facing settings What Makes You Successful • Proven leadership and project management skills across multiple municipal projects, • Ability to coordinate multidisciplinary teams and mentor staff effectively, • Strong interpersonal skills with a client-focused mindset, • Experience presenting technical information and recommendations in public forums, • Self-directed, organized, and able to thrive in a collaborative, community-focused environment

Job DescriptionCompany Description We help job seekers and career changers prepare for and advance in careers with a focus on sustainable, high-growth, high-demand industries. Our committed and well-trained workforce professionals deliver comprehensive workforce solutions at integrated career centers, sector-focused centers and community, and partner sites. Job Description • Manages a caseload of participants and provides counseling and mentoring, • Assesses participant competencies, work history, educational attainment, skills, and abilities; identifies challenges to finding employment and prompts them to find solutions, • Conducts regular ongoing individual meetings with participants for job search, education, job retention, and/or job readiness, • Completes an individualized overview of available services and works with participant to create an employment plan for short- and long-term goals, • Maintains information about area resources and employers, • Ensures participant accountability and attendance; tracks and maintains employment retention goals, • Provides government agencies with prompt notification that a participant has lost or reduced hours of employment, • Maintains scheduled, periodic contact with participants in a variety of locations to assess job retention/advancement issues, • Provides information to participants on available training and/or jobs that will lead to advancement, • Assumes central responsibility for participants achieving self-sufficiency by monitoring progress throughout the program cycle, beginning with referral and continuing through retention and advancement efforts, • Prepares, organizes, and maintains accurate, updated information in both electronic and paper participant files reflecting the entire history of a program participant including log of supportive services issued, • Provides case management with a focus on helping customers to prepare for employment that leads to self-sufficiency, • Facilitates customer access to training, education, and to employment services, as well as job-specific information; provide case management to customers at the appropriate level., • Display the ability to work with a variety of cultures, languages, educational and economic backgrounds in a classroom setting, • Always coordinate individual instruction in an orderly and professional manner, • Improve the job readiness score of students in workshops and deliver a pipeline of work ready customers to staff, • Introduce Company and other tools in the classroom (Resume-Pro, Company Academy, General Education Diploma Academy, Money-Skill, Project Chief Executive Officer), • Ensure that individual participants complete and turn in assignments as scheduled, • Conduct follow-up outreach to students not engaged in classroom activities and document efforts in program issues systems, • Maintain student's assessments in files and student database, • Work well in teams, business customers and other staff, • Able to communicate effectively to both oral and written, • Additional duties as assignedQualifications, • Related Associate degree from an accredited university or college, or equivalent work experience, • Related work experience, • Excellent verbal and written communication skills, • Demonstrated customer service skills, • Familiarity with the communities being served, with knowledge and understanding of local needs and resources, • One to three years’ experience in workforce development or related programs preferred Additional Information Starting Salary Range: $55K-60K/annually All your information will be kept confidential according to EEO guidelines. Equus Workforce Solutions is a leading provider of workforce development services in North America. With a dedicated and passionate team, Equus puts the industry’s best practices to work by focusing on the development, design, and delivery of demand-driven workforce solutions. When you join Equus, you can expect extensive learning opportunities and networking programs. But most of all you can expect to make a lasting impact on the lives of others. At Equus we are strengthened by diversity. We are committed to providing a work environment in which everyone is included, treated fairly and with respect. Equus Workforce Solutions is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, age, pregnancy, sexual orientation, gender identity, ancestry, religion, national origin, veteran status, physical or mental disability, or reprisal or any other characteristic protected under state, federal, or local law.

Job Description Company Description Coranet Corp is a leading national provider of IT Infrastructure, Audiovisual, Security, and Building Technology Solutions for Construction Firms, Developers, Fortune 500, and Government Institutions. We partner with the top technology brands to design, build, and install comprehensive technology solutions for our clients' real estate assets. Coranet has repeatedly appeared in Inc. 5000's list of the Fastest Growing Private Businesses and helps companies of all sizes transition into the digital age, leveraging IT to make their buildings and assets "smart." At Coranet Corp, we're driven by a passion for innovation and a commitment to excellence. We foster a culture of creativity and collaboration, where every team member is empowered to contribute to our dynamic growth and the development of groundbreaking technology solutions. Role Description: Sales Development Representative We're seeking a motivated Sales Development Representative in the Tri-State area. This full-time role will blend core sales development responsibilities (cold calling, emailing, prospecting) with forward-thinking initiatives around automated sales sequences, AI/LLMs (Large Language Models), and other advanced sales tools. You'll work closely with Account Executives, Sales Managers, and senior leaders to drive new business development, refine outreach strategies, and push the boundaries of modern sales and marketing technologies. Successful candidates will develop key relationships with prospects, source and qualify opportunities for engineering and account executives to close. Successful SDRs will be promoted up the ranks to Account Executives, managing their own pipelines and networks. The candidate should be comfortable targeting new customers, developing a pipeline, qualifying leads, and working closely with our core sales team. You will have the opportunity to learn and work directly with our general manager and senior team. The ideal candidate will be based in the target market and expected to meet with prospects in person weekly, setting up site walks, lunch-and-learns, and other networking opportunities with developers, general contractors, and enterprise clients. Furthermore, the ideal candidate would have the knowledge and responsibility to craft outreach strategies, design drip campaigns, and advise senior management on innovative ways to capture new prospects. They would also be responsible for implementing these campaigns and ensuring traction via cold calling, prospecting, and top-of-the-funnel outreach. Products represented include Network Infrastructure (Copper, Fiber), Audio-Visual solutions, Network Security, Physical Security (Security Camera / Biometric Scanners), commercial DAS, and wireless solutions. Customers focus on Developers, General Contractors, Enterprise CIOs, National Corporations, Manufacturers, and more. Key Responsibilities * Sales Development and Prospecting: * Conduct cold calling, targeted emailing, and LinkedIn outreach to identify prospective clients in construction, real estate, enterprise, and related verticals. * Qualify incoming leads and coordinate with the sales team to move these opportunities down the funnel. * Collaborate with senior sales to refine messaging and prospecting approaches for a range of products (Network Infrastructure, Audio-Visual, Security Solutions, DAS, Wireless). * Manage a pipeline of opportunities and prospects from start to close. Feeding the sales team with quotable, qualified deals each month. * Market Research & Strategy: * Research potential target industries, competitors, and prospective leads to inform outreach strategy. * Work with senior management to develop insightful prospecting lists and optimize lead generation tactics. * Assist with analyzing metrics around open rates, response rates, call outcomes, and meeting conversions to iterate on campaign performance. • Develop automated sales and marketing workflows to push Coranet's outbound content In-Person Event Engagement: * Attend and support local networking events to connect with real estate developers, general contractors, executives, and other potential customers. • Set up and attend weekly in-person meetings, lunches, etc., with potential prospects in New York City, New Jersey, and the surrounding area, • Walk client sites and build outs to understand customer needs and our opportunity. Automated Sequences & AI Implementation: * Help build and optimize automated outreach and drip campaigns, leveraging CRMs and advanced tools like LLMs (e.g., ChatGPT) for email writing, lead routing, and follow-up workflows. * Evaluate and recommend emerging AI-driven solutions to improve the sales cycle, from pipeline management to lead scoring. * Collaboration & Reporting: * Maintain accurate records in our CRM system (e.g., outreach activities, call notes, pipeline status). * Assist in creating regular reports on lead generation progress, pipeline development, and AI/LLM tool adoption. Qualifications * Past or current enrollment in (or recent graduate of) a Bachelor's or Master's program, ideally in Sales, Business, Marketing, Computer Science, or a related field, but all fields are welcome. * Familiarity with sales and marketing prospecting software, CRMs (e.g., Outreach), and/or marketing automation tools. * Interest or experience in AI, natural language processing, or LLM-based tools is strongly preferred. * Comfortable cold calling and sending high-volume outreach messages * Able to craft compelling emails, automated scripts, and workflows. * Strong organization and time-management skills, with the ability to work autonomously. * Willingness to travel up to 25% (depending on events and team needs) and attend in-person networking opportunities. Why Join Coranet * Opportunity to work at the intersection of technology, sales, and AI innovation. * Hands-on mentorship from senior and junior sales team members, with exposure to strategic decision-making and the ability to learn leading sales systems and tools. * A dynamic environment that encourages new ideas and creativity, where your contributions will directly impact the growth of our organization. * Potential for professional growth and a future career path in sales, marketing, or technology. * Flexible work environment with a mix of remote and on-site responsibilities.

Job Description T&M Associates is looking for a Supervising Municipal Engineer to join our Municipal Department in Toms River, NJ. In this leadership role, you will oversee a team of engineers while managing a portfolio of capital improvement projects across various municipal sectors. This hybrid position offers a flexible work environment, allowing for a mix of remote work and in-office collaboration. The ideal candidate will have extensive experience in municipal engineering, strong leadership skills, and a proven ability to manage both technical and client-facing aspects of projects. Key Responsibilities: • Team Leadership & Supervision - Lead, mentor, and supervise a team of municipal engineers, providing guidance, technical support, and professional development opportunities., • Project Oversight - Oversee the preparation of engineering documents for municipal projects, including plans, specifications, and cost estimates for roadway, drainage, sewer, water, parks, and athletic fields improvements., • Project Management - Manage multiple high-priority projects, ensuring they are completed on time, within budget, and meet quality standards. Act as the primary point of contact for clients, contractors, and regulatory agencies., • Field Inspections & Assessments - Conduct or oversee field inspections of infrastructure projects to ensure compliance with design standards and local regulations., • Review & Approvals - Review municipal site plans, zoning applications, and subdivisions, preparing detailed technical reports and recommendations for Planning & Zoning Boards., • B.S in Civil Engineering or related field., • 10+ years of experience in Civil Engineering, including project management for design and construction projects., • Must have Professional Engineer (PE) license. Professional Planner (PP) license a plus., • Familiarity with AutoCAD Civil 3D., • Experience in reviewing applications for Land Use Boards with availability for Municipal (Land Use Board, Council and/or Committee) night meetings., • Excellent written and verbal communication skills., • Ability to organize and manage multiple projects. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. For California based applicants, our CCPA-CRPA Privacy Notice can be found on our Careers page at #LI-HYBRID

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring Construction Inspectors. Our ideal candidate is seeking to grow their knowledge on highway, roadway and bridge projects throughout NJ with agencies such as NJDOT, NJTA, SJTA, DRPA, DRJTBC, and/or experience with Local County and State agencies. Responsibilities will include, but are not limited to: • Observe construction activities to ensure compliance with plans and specifications., • Prepare daily reports, quantity measurements and computations. Assist with progress reports and Pay Estimates., • B.S. in Civil Engineering or at least 2 years of prior experience in Construction Inspection through internships or employment required., • NICET all Levels a plus but not required., • ACI, NJSAT, TCC, CCTC, and/or OSHA 10 a plus but not required., • Able to work overtime, some nights, or weekends as needed., • Ability to drive to and from, on, or around a project site during all times of the day., • Strong organization and communication skills. Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description Job Description LS Technologies, a Tetra Tech Company, is seeking a Senior Platform Engineer with technical expertise and Enterprise Information Display System (E-IDS) knowledge and experience to support the Federal Aviation Administration (FAA). In this role, you will be responsible for the design, implementation, and management of secure, scalable, and automated platform environments supporting mission-critical aviation systems. You will contribute to the full lifecycle of infrastructure and DevOps capabilities - from architecture and deployment to optimization and maintenance - ensuring operational excellence in a secure government environment. Responsibilities • Design, deploy, and manage automated platform solutions ensuring scalability, security, and reliability., • Maintain and optimize platform infrastructure, including provisioning, patching, upgrades, and monitoring., • Build and/or manage CI/CD pipelines for containerized and microservice-based applications., • Create and maintain automation scripts using Bash, Python, or other scripting languages to streamline operations., • Implement security controls, RBAC, and compliance monitoring aligned with FAA and federal standards., • Develop and manage Helm charts for application deployment and configuration management., • Administer and monitor message broker systems such as RabbitMQ, ensuring high availability and optimal performance., • Collaborate with development teams to containerize Java applications and optimize runtime environments., • Manage and harden Linux-based systems, ensuring compliance with security and performance standards., • Drive continuous improvement initiatives in deployment, configuration management, and system reliability., • Document configurations, standard operating procedures, and troubleshooting guides., • Participate in integration, verification, and validation activities for new system deployments., • Support technical reviews, briefings, and stakeholder engagements., • Must have experience maintaining legacy FAA systems, such as IDS., • Experience in platform engineering, DevOps, or cloud infrastructure roles, • Strong DevOps background including CI/CD pipeline creation and automation (e.g., Jenkins, GitLab CI, ArgoCD), • Proficiency with OpenShift and Kubernetes administration and troubleshooting, • Experience with Helm, Docker, and container orchestration best practices, • Hands-on experience managing RabbitMQ or similar message broker technologies, • Proficiency in Java application environments and runtime management, • Scripting skills in Bash, Python, or similar languages, • Solid understanding of Linux systems administration and shell environments, • Solid grasp of networking, storage, and security concepts within hybrid and cloud environments •Proven ability to design and maintain monitoring, observability, and alerting systems. Preferred Qualifications, • Prior experience supporting FAA, DoD, or other air navigation service providers., • Familiarity with National Airspace System (NAS) architecture or similar critical infrastructure., • Experience with hybrid cloud environments (AWS, Azure, or GCP)., • Relevant industry certifications (e.g., Red Hat Certified Engineer, AWS Solutions Architect, Certified Kubernetes Administrator)., • Strong analytical and troubleshooting skills to identify and resolve system issues effectively., • Excellent interpersonal and communication skills to collaborate with cross-functional teams and convey technical concepts to non-technical stakeholders., • Experience working effectively in a secure and regulated environment. Work Requirements: • Work location: William J. Hughes Technical Center, Atlantic City, NJ, • Work Hours: Normal working hours, • Travel: 0%, • Physical requirements:, • Extended Computer Use: Regular and prolonged periods of working at a computer terminal., • Lifting and Carrying: Occasional lifting of equipment and materials weighing up to 50 pounds may be required during installations or maintenance., • Mobility: Ability to move around the office environment to access computer hardware, networking equipment, and server rooms., • Dexterity: Manual dexterity and visual acuity to operate computer equipment, troubleshoot issues, and perform tasks requiring precision., • Sitting/Standing: Both prolonged sitting and occasional standing may be required for troubleshooting and attending to system issues. At LS Technologies, we're enhancing our nation's critical infrastructure by providing engineering, technical, and professional services to Federal Government agencies. The quality of our work, deep technical expertise, and genuine passion for public service sets us apart. As a growing organization, we are expanding our benefits and communication with our employees, offering add-ons that speak to our growing employees' needs. Join us in delivering high-quality solutions and shaping the future of safety and innovation for our government partners. EEO Commitment LS Technologies, a Tetra Tech Company, is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor, and we request priority referral of veterans. We invite applications from all interested parties. Requesting An Accommodation LS Technologies is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by LS Technologies and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with LS Technologies and have accommodation needs for a disability or religious observance, please send us an email at or speak with your recruiter. Compensation (Pay Bands) Salary at LST is determined by a wide array of factors, such as (but not limited to) education, certifications, knowledge, skills, competencies, experience, location, and clearance level, as well as contract-specific affordability and organizational requirements and applicable employment laws. Please note that the salary information is a general guideline only. The projected compensation range for this position is provided within the posting and is based on full-time, 40-hour/week status. Part-time staff receive compensation at an hourly rate. The estimated minimum and maximum displayed represent the broadest range for this position (inclusive of high geographic and high clearance requirements) and are just one component of the LST's total compensation package for employees. ** In compliance with local laws, LS Technologies presents this reasonable compensation range as a guideline for roles in California, Colorado, New York, or Washington D.C." Benefits offered to all employees who work 30+ hours per week: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Annual Leave, and Holidays. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. With 30,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Explore our open positions at . Follow us on social media to learn more about our people, culture, and opportunities: LinkedIn: @TetraTechCareers X (Twitter): @TetraTechJobs Job Posted by ApplicantPro

Job Description We are seeking a Sr. Construction Inspector to support our FAA Customer on site daily at the William J. Hughes Technical Center at the Atlantic City International Airport. *REAL ID or PASSPORT required for Government Identification purposes. Responsibilities: • Reviews architectural/engineering plans and specifications to ensure they meet all applicable codes and provide comments relative to construction., • Assists architects and engineers in evaluating design and construction objectives as well as construction submittals., • Attends preconstruction meetings., • Conducts independent construction inspections for compliance with contract, environmental, safety and facility requirements, regulations, policies, and procedures., • Develops daily inspection reports; Take photos of existing conditions and construction progress., • Coordinates schedules and work activities with customers, contractor personnel and all stakeholders., • Assists in preparing scopes of work and cost estimates for Contract modifications., • Supports all post-award construction completion work by participating in lessons learned reviews and completion of all contact closeout procedures, including development of RCRs (Record of Change Requests) and submission of warranty and O&M information to the Facility Operations Branch., • Monitors construction sites to ensure overall compliance., • Uses survey instruments, metering devices, and test equipment to perform inspections. Provides written documentation of findings., • Recommends the Government issue violation notices and stop-work orders, when necessary, until building is compliant. Qualifications: • Previous work experience in quality control or other related fields, • Strong attention to detail, • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • The candidate must possess construction experience in complex projects related to the following disciplines: electrical, mechanical, structural, civil and fire protection., • Eight (8) years of relevant experience is required for the Senior level Must be able to pass a security background check Company DescriptionBacik Group LLC is a verified Service-Disabled Veteran Owned Small Business (SDVOSB) whose customer base consists heavily of multiple Federal Agencies such as the Department of Defense, the General Services Administration, and the Department of Veterans Affairs. Bacik Group also works with Private Sector Entities including AECOM, ECC, and Vertex Aerospace. We have an extensive portfolio of work fulfilling prime positions on various types of contracts, including Time and Materials, Firm Fixed Price, and Indefinite Delivery/Indefinite Quantity.Bacik Group LLC is a verified Service-Disabled Veteran Owned Small Business (SDVOSB) whose\r\ncustomer base consists heavily of multiple Federal Agencies such as the Department of Defense, the\r\nGeneral Services Administration, and the Department of Veterans Affairs. Bacik Group also works with\r\nPrivate Sector Entities including AECOM, ECC, and Vertex Aerospace. We have an extensive portfolio of\r\nwork fulfilling prime positions on various types of contracts, including Time and\r\nMaterials, Firm Fixed Price, and Indefinite Delivery/Indefinite Quantity.

Job DescriptionJob Title: CNC Programmer Job Summary: We are seeking a skilled and detail-oriented CNC Programmer with a strong background in injection mold building to join our precision manufacturing team. The ideal candidate will have experience programming CNC machines for the fabrication of components used in injection mold tooling. This role requires strong knowledge of machining process, CAD/CAM software, and electrode design principles. Key Responsibilities: • Program CNC tool paths for mills, lathes, and/or EDM machines to produce components for injection mold tooling., • Read and interpret technical drawings, CAD models, and engineering specifications to fabricate precision tooling., • Optimize machining strategies for efficiency, surface finish, and dimensional accuracy., • Set up and prove out CNC programs on the shop floor, adjusting as needed., • Collaborate with engineering teams to improve mold designs and manufacturability., • Ensure all work meets quality standards and adheres to safety protocols. Qualifications:, • Minimum of 5 years of experience in CNC programming, preferably in a mold making environment., • Proficient in MasterCam software. Mazatrol is a plus., • Strong understanding of machining principles, cutting tools, and materials used in mold construction., • Proficient in reading technical drawings and interpreting 3D models., • Experience designing electrodes for use with Sinker EDMs is a plus., • Strong organizational skills, with the ability to prioritize urgent jobs that impact downstream operations while balancing overall shop efficiency. PlDyQQy9D3

Job DescriptionJob Title: Mechanical AssemblerJob Description In this role, you will be responsible for building mechanical assemblies from both detailed production drawings and prototype sketches. You will prepare as-built drawings, packing lists, and quality control documentation. Quality control will be performed on third-party and in-house components, as well as on completed assemblies. Additionally, you will test electrical and mechanical assemblies, and collect and interpret test data. You will assist in updates to quality assurance programs and documentation, while adhering to manufacturing best practices for marine environments and robotic systems. Responsibilities • Build mechanical assemblies from detailed and prototype drawings., • Prepare as-built drawings, packing lists, and quality control documentation., • Perform quality control on third-party and in-house components and assemblies., • Test electrical and mechanical assemblies., • Collect and interpret test data., • Assist in updates to quality assurance programs and documentation., • Follow manufacturing best practices for marine environments and robotic systems., • Design, set up, and maintain workstations, tools, and manufacturing jigs., • Maintain, clean, and organize the shop and inventory.Essential Skills, • 1-2 years of hands-on experience with mechanical assemblies., • At least 6 months of experience with mechanical assemblies., • 1-3 years of experience with small hand and power tools., • Ability to work from work orders and blueprints.Additional Skills & Qualifications, • Experience with hand tools and mechanical assembly., • Familiarity with production and blueprint reading. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Monroe,NJ. Application Deadline This position is anticipated to close on Mar 18, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Who Our Client Is Our client is a purpose-driven organization where employees at every level play a meaningful role in shaping how the world does business. They are a small, agile team with a world-class culture and national impact. Collaboration, innovation, and data-backed decisions are core to how they operate — and they invest deeply in their people, with measurable results to back it up. What Our Client Needs We are looking for an Email and Lead Generation Senior Specialist to oversee all email communications to the organization’s community. Reporting to the Director of Digital Content Operations, this role is critical to ensuring the right message reaches the right audience at the right time while maintaining brand compliance and supporting marketing initiatives tied to membership, products, events, and supply chain topics. Who You Are You’re a detail-oriented, analytical marketer who understands how email fits into the full customer lifecycle. You bring strong writing and editing skills, are comfortable managing multiple stakeholders, and thrive in environments that value both creativity and performance. You’re confident owning campaigns end-to-end and collaborating cross-functionally to drive results. What You’ll Do • Partner with marketing program leads to plan and design email campaigns supporting membership, products, events, and supply chain initiatives, • Build and launch promotional batch campaigns and automated nurture programs using Marketo, • Manage audience segmentation based on behavior, demographics, and firmographics to improve deliverability and engagement, • Develop and manage A/B testing strategies, including hypotheses, segmentation, creative variations, and performance analysis, • Analyze campaign results and recommend optimizations to improve open rates, click-through rates, and overall engagement, • Create and maintain a comprehensive email communications calendar aligned to content releases, promotions, and the customer journey, • Ensure compliance with CAN-SPAM, GDPR, and related regulations, • Maintain email database hygiene and monitor delivery, open, and click performance, • Develop, implement, and optimize lead scoring programs to prioritize high-value prospects, • Analyze scoring effectiveness and support CRM integration to ensure alignment with sales campaigns, • Execute content updates on brand and store sites, • Support merchandising placements and manage digital assets including images, videos, and PDFs This role operates in a hybrid work environment. What You’ll Need • 1–2 years of hands-on experience in email marketing, lead generation, or a related role, • Bachelor’s degree in Marketing, Communications, Business, or a related field, • Experience with marketing automation platforms, particularly Marketo, • Familiarity with CRM systems, including Microsoft Dynamics, • Working knowledge of basic HTML, • Strong analytical skills with experience tracking and evaluating campaign performance, • Excellent writing, editing, and proofreading abilities, • Understanding of customer journey mapping and lifecycle marketing, • Ability to manage multiple projects from concept through execution, • Experience working in agile development environments preferred, • Working knowledge of UX/UI principles preferred, • Familiarity with organizational standards and solutions a plus What They Offer Salary Range: $68,000 – $85,000 Bonus: Eligible for participation in the annual employee bonus program • Medical, prescription, dental, and vision coverage (effective immediately), • 401(k) with employer safe harbor and profit-sharing contributions (effective immediately), • Short- and long-term disability coverage, • Mental health and wellbeing support, including employer-sponsored therapy and coaching sessions, • Individual wellness platform, • Paid parental leave, • Generous PTO and company-paid holidays, • LinkedIn Learning, • Tuition reimbursement, • Employee recognition and engagement platform, • Catered lunches twice per week on in-office days Equal Opportunity Statement Our client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, or national origin.

Job Description Overview We are seeking a dedicated and detail-oriented Assistant to our Human Resources Director to join our dynamic team. The ideal candidate will play a crucial role in supporting various HR functions, including talent acquisition, employee relations, and benefits administration. This position requires strong communication skills, a solid understanding of employment and labor laws, and the ability to manage multiple projects effectively. If you are passionate about human resources and eager to contribute to a positive workplace culture, we encourage you to apply. Duties • Assist in creating and updating employee handbooks and HR policies., • Manage the full recruitment cycle, including creating and posting job descriptions, screening resumes, and scheduling interviews with potential candidates., • Facilitate the on boarding process for new hires, ensuring all paperwork and training are completed accurately., • Conduct employee orientation sessions to ensure new hires are well-integrated into the company culture., • Manage employee evaluations and performance management processes to support talent development. Assist with the annual employee review process., • Administer benefits programs and assist employees with inquiries regarding benefits administration., • Ensure compliance with FMLA, OSHA regulations, and other employment laws while maintaining accurate records., • Support change management initiatives by facilitating communication between management and employees., • Collaborate with management on strategic planning and organization design efforts to boost employee morale and engagement.., • Maintain HRIS databases for efficient workforce management and data collection., • Provide administrative support for payroll processing using systems such as ADP or Paychex., • Handle conflict management issues with professionalism and discretion., • Help develop and implement a comprehensive workplace violence plan., • Coordinate and track mandated training programs, including sexual harassment and other compliance-related courses., • Maintain accurate records of employee paid time off (PTO) and sick leave., • Previous experience in an administrative or HR support role is a plus or Bachelor’s degree in Human Resources Management or related field preferred., • Proven experience in human capital management, talent acquisition, and employee relations., • Familiarity with employment & labor law principles, including FMLA and workers' compensation regulations., • Strong project management skills with the ability to prioritize tasks effectively., • Proficient in Microsoft Office Suite., • Excellent communication skills, both written and verbal, with a focus on interpersonal relationships., • Excellent organizational skills and a strong attention to detail., • Experience with data entry, social media management for recruitment purposes, and administrative tasks is essential., • Knowledge of performance management systems and training & development practices is a plus., • Ability to handle confidential information with discretion and professionalism., • A proactive and positive attitude with a willingness to learn., • Ability to work collaboratively within a team environment while also being self-motivated., • Knowledge and experience with BambooHR a plus.

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement We're seeking a high-energy Advertising Sales Development Representative who's thrives on commission, owns their pipeline, and turns conversations into revenue. This is a 1099 independent contractor role (commission-only to start), perfect for proven closers who want full control over their income and schedule. Key Responsibilities • Prospect and outreach to businesses that need real digital growth., • Lead insightful discovery calls to uncover goals and pain points., • Guide prospects through the full sales cycle: from initial contact to signed proposals., • Craft persuasive presentations that highlight clear benefits., • Nurture relationships with consistent, value-driven follow-up for repeat and referral business.What We're Looking For, • Proven track record in sales (digital marketing, agency, or B2B experience strongly preferred)., • Confident, persuasive communicator who builds trust quicklyon calls and in writing., • Self-starter who excels in a remote environment: disciplined, organized, and proactive with CRM/lead management., • Resilient and growth-mindedrejection fuels you, not stops you., • Excited by uncapped earnings and the freedom of independent contracting.Compensation & Career Path, • 100% commission-only (1099) to start Uncapped earning potential based on your closes., • High performers who consistently hit defined sales milestones can transition to W2 employment with base salary + commission + benefits (401k with 6% company match and PTO). Ready to turn your hustle into serious income while helping businesses thrive? Apply nowsend your resume and a quick note on your biggest sales win to [your email or application link]. Let's talk about how you can start closing with VINIO. VINIO Marketing Where drive meets real results. This is a remote position.

Job DescriptionSalary: $78,000 - $98,000. Range reflects experience from developing HR professionals to experienced generalists able to operate independently. The Company Home Surplus is a multi-location retail warehouse superstore for cabinets, doors, and more, featuring in-stock products, expert design, and outstanding customer service at value prices. After operating as a single location for over 40 years, Home Surplus has expanded to 5 stores in NJ and MD in recent years as it grows into a national footprint. The Position This is a hands-on HR Generalist position responsible for day-to-day HR across multiple locations. The role focuses on manager support in employee relations, structured hiring practices, and maintaining reliable HR processes across stores and support functions. Primary Responsibilities Manager Support & Employee Relations • Advise managers on attendance, performance, discipline, and terminations, • Ensure similar situations are handled consistently across locations, • Investigate complaints and document findings, • Administer BambooHR HRIS (employee changes, records, reporting), • Coordinate onboarding and offboarding, • Track multi-state compliance requirements, • Manage job postings and applicant flow, • Run background checks and onboarding steps, • Maintain handbook and policies, • Keep practices aligned with employment law, • Create consistent documentation standards, • Standardize forms and workflows, • Help managers apply expectations consistently How the Role Works The position regularly works with operational leaders to address employee issues, guide manager decisions, and ensure decisions are documented consistently. Success in the role means: • Issues handled consistently, • Managers making confident, consistent decisions, • Few recurring employee problems The HR Generalist is based in the Keyport, NJ office and requires communication across locations by phone and electronic means, with occasional travel for store visits. Requirements • 3+ years HR generalist experience minimum. 4-8 years preferred., • Experience handling employee relations situations directly, • HRIS administration experience (BambooHR preferred, similar systems acceptable), • Multi-location environment, • Retail, distribution, or operations-focused organization, • Leave administration experience Working Style That Fits • Practical and steady, • Direct communicator who builds trust, • Organized and able to manage multiple issues simultaneously, • Parallel processor who is organized and deadline-reliable, • Understands business context while executing day-to-day work consistently Compensation & Benefits Base salary Health, dental, vision, life, disability, PTO, 401k Advancement opportunities as we grow

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive salary, • Opportunity for advancement Job Description: 1. Demonstrate and communicate the core values of CareTen, Inc., 5. Successfully oversee and manage all service and employment related content made to the office after normal business hours as necessary.