Welder jobs in Wisconsin

Job Description ERS Elite is hiring Welders to support high-volume manufacturing operations for a leading transportation equipment manufacturer. This role is responsible for performing MIG welding and fabrication on structural steel and aluminum components used in trailer production. This is a direct-hire opportunity with long-term career growth in a modern manufacturing environment Key Responsibilities • Perform MIG welding (GMAW) on steel and/or aluminum components, • Weld structural assemblies including frames, crossmembers, and panels, • Read and interpret blueprints, weld symbols, and work instructions, • Set up and operate welding equipment safely and efficiently, • Inspect welds for quality, penetration, and compliance with specifications, • Use hand tools, grinders, and fabrication equipment to prepare materials, • Maintain production pace while meeting quality standards, • Follow all safety protocols and PPE requirements What Sets This Opportunity Apart • Direct placement with a leading U.S. manufacturer, • Stable, long-term career in a high-demand trade, • Growth into advanced manufacturing technologies Career Growth • Advanced welding and fabrication, • Robotic welding opportunities, • Lead and supervisor career paths, • AWS and internal certification pathways Requirements Preferred Experience • 1+ years of welding experience in manufacturing, construction, or industrial environments, • Experience with MIG welding (GMAW) required; aluminum welding a plus, • Ability to pass a hands-on weld test (fillet and/or groove welds), • Familiarity with production environments and quality standards Veteran Hiring Initiative Military Veterans strongly encouraged to apply. Relevant experience includes: • Welding, fabrication, or metal work, • Mechanical maintenance (automotive, diesel, aviation), • Construction, engineering, or equipment repair Candidates with military experience and strong mechanical aptitude may qualify for pre-employment welding training if additional skill development is needed. Benefits Compensation & Benefits • Competitive hourly pay based on experience, • Overtime opportunities available, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Career advancement into:, • Advanced welding, • Robotic welding, • Lead / supervisor roles

Job Description Come join our growing manufacturing company as 2nd Shift Robotic Welder Second Shift Premium Are YOU a highly motivated candidate? Are YOU a dedicated manufacturing professional with a sincere desire to go that extra mile for the customer? WE are a team of hardworking professionals that strives to be the best in the industry. ABOUT OUR COMPANY: We are a privately-held independent metal fabrication company that produces components used in a wide range of industries. Our goal is to provide products and services that meet our customers’ needs in a timely fashion with the highest level of quality and value. Our capabilities at DJS are constantly expanding and currently include CNC machining, full metal fabrication (laser, brake, welding), painting, integrated assemblies and more. Our facility includes the latest in manufacturing technology and equipment. Coming in 2027: A brand-new, state-of-the-art, fully air-conditioned facility! JOB DESCRIPTION: Monday through Friday 6am-2pm The Robotic Welding Cell Set-up/Operator is responsible for the daily setup and operation of a MIG welding robot in a fabrication shop environment to the customer’s specifications concerning quantity and quality. He/she may be required to assist other operators as a helper on key work or machines as required; including housekeeping, maintenance work and material staging. Other duties may be assigned as necessary. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Operate manual and/or robotic welding equipment., • Read shop orders and engineering drawings to determine specifications and accurately complete all required functions., • Safely apply welds per specifications to produce completed product., • Produce assemblies of metal work pieces to quality and efficiency standards, including repetitive lifting and placing metal work pieces into fixtures., • Measure dimensions of metal work pieces to ensure conformance using calipers, micrometers, height gauges, templates, rulers, etc., • Perform quality checks as prescribed and report issues to lead and/or supervisor., • Accurately document and maintain information in written or electronic form., • Safety complete finishing functions such as grinding, sanding, etc., • Perform operator preventive or corrective maintenance on robotic systems, welders or components., • Develop robotic path motions to maximize efficiency, safety and quality., • Modify computer-controlled robot movements., • Adopt and incorporate quality methods into their work., • Ability to work independently., • Positive and Strong work ethic. QUALIFICATION REQUIREMENT: • Experience running a Panasonic TA series MIG welding robot., • Flexible and responsive with a strong teamwork orientation., • Good verbal and written communication skills., • Desire to learn new skills and improve technical knowledge., • Strong orientation toward quality, safety and continuous improvement., • Ability to work well in a fast paced environment to meet team expectations., • Commitment to quality and accuracy of work performed., • Demonstrated ability to effectively implement or respond to change., • Understanding and support of Company policies and procedures., • Safety conscious behavior., • Excellent attendance. THE FOLLOWING EXPERIENCE IS A PLUS BUT NOT REQUIRED: • A certificate from college or technical school is a plus, • Robot welding experience OUR REWARDS & RECOGNITION: Joining the DJS team means forging your career path as part of a successful growing company. We offer real opportunities for the individual ready to take the chance. We will train and provide support to ensure your success! This is a full time position in the competitive and challenging metal manufacturing field. The pay range/rate of pay for this position may vary depending on a number of factors including, but not limited to, the position offered, location, education, training and/or experience. In addition to base pay, we also offer excellent benefits, work-life balance and a collaborative team environment! Benefits include tuition reimbursement, health, dental, vision, and life insurance, short and long-term disability, generous 401(k) match, paid holidays and paid time off, a lucrative profit sharing program, employee and family activities throughout the year, and so much more! We are also offering a lucrative sign-on bonus $$$ for hired candidates. (all benefits are subject to eligibility requirements) Wisconsin Stamping wants all of its employees to succeed and encourages people of all backgrounds to apply. We’re proud to be an Equal Opportunity Employer, and you’ll be considered for this role regardless of race, color, religion, sex, national origin, age, sexual orientation, ancestry, marital, disabled or veteran status. We’re committed to fostering an environment where people of all lived experiences feel welcome. Persons with disabilities who anticipate needing accommodations for any part of the application process may contact, in confidence hr@wisconsinstamping.com Are you enthusiastic about this position and ready for a new challenge? Apply now! Equal Opportunity Employer NOTE: Staffing agencies, head hunters, recruiters, and/or placement agencies, please do not contact our hiring managers via email or phone or other methods.

Job Description Performance Fab | A Division of Fox Cities Builders At Performance Fab, we don't just fabricate steel. We create the structures, components, and custom solutions that help bring amazing projects to life. If you're someone who takes pride in craftsmanship, enjoys working with your hands, and loves seeing a finished product that was built by you, this could be the perfect opportunity. We're looking for a Welder/Fabricator who is ready to roll up their sleeves, tackle exciting challenges, and become part of a team that values hard work, quality, and innovation. Whether you're an experienced tradesperson or looking to grow your fabrication skills, you'll have opportunities to learn, advance, and build a rewarding long-term career. What You'll Do: • Perform MIG, TIG, and Flux Core welding on a variety of fabrication projects, • Read and interpret blueprints, shop drawings, and fabrication plans, • Cut, fit, assemble, and fabricate metal components with precision, • Inspect finished work to ensure quality, accuracy, and craftsmanship, • Assist with custom fabrication projects and structural steel solutions, • Work alongside a skilled team to solve problems and deliver exceptional results, • Travel to jobsites as needed for installation, repairs, and field fabrication, • Maintain a safe, organized, and efficient work environment What Makes You a Great Fit: • Welding and fabrication experience preferred, • Ability to read blueprints and use measuring tools accurately, • Strong attention to detail and commitment to quality workmanship, • Positive attitude and team-first mentality, • Dependable, self-motivated, and eager to learn, • Commitment to workplace safety, • Ability to lift up to 50 pounds and thrive in a fast-paced environment Why Join Performance Fab? • Competitive pay and excellent benefits, • Opportunities for advancement and career growth, • Hands-on training and continued skill development, • Work with experienced professionals who care about your success, • Supportive, family-oriented culture built on teamwork and respect, • Create products and structures you can take pride in for years to come At Performance Fab, every weld matters, every project has a purpose, and every team member plays a critical role in our success. If you're ready to build your skills, tackle exciting projects, and join a team that values craftsmanship and hard work, we want to hear from you. Apply today and start building a career you'll be proud of with Performance Fab.

Job Description Fitter/Welder Level I LeJeune Steel Company is focused on becoming the pre-eminent structural steel provider in North America focused on delivering large, complicated and fast-track projects. We are a group of forward-thinking, focused, knowledgeable individuals that are looking to grow our exceptional team. Our Core Promise: To Outdo. We tackle every project with uncompromising tenacity and unmatched mastery, making our customers’ vision a reality. Building the tallest, coolest, never-been-done-before buildings takes courage and strength. You have to be smarter than everyone else. Not just book smart, but hard knocks smart – living it smart. Because the best solutions to the trickiest problems don’t just happen. You get there by tackling the impossible, working around it, designing through it and engineering it into reality. And not just by doing it, But by Outdoing it. Our Values: • Caring and enduring relationships with others, • Honesty and integrity, • Excellence, nothing less, • Enjoying our work, • Safety, health and well-being of all of our employees, • Combining small company abilities with large company advantages What We Are: • Relentless, • Forward-Thinking, • Focused, • Strong, • Knowledgeable Description At LeJeune Steel Company, our people are our most important resource. We're looking for a highly skilled Fitter/Welder I who will lay out, fit, and fabricate metal components to assemble structural components for complex structures such as stadiums and skyscrapers. Responsibilities: • Analyzes fabrication drawings and specifications to plan layout, assembly, and welding operations., • Work closely with quality control and third-party inspectors to meet project specifications and internal quality standards., • Inspects weld preps and joints to ensure proper fit-up using standard measuring instruments. Weld components in flat, or vertical positions., • Use proper hand tools such as oxy-fuel torch, plasma torch, and MIG welding equipment., • Ensure the accuracy of components being fabricated., • Perform day-to-day basic maintenance on tools and equipment., • Operate overhead cranes daily and forklift as instructed., • Other duties as assigned by leadership. Qualifications: • Inspect material, drill, grind, cope, connect angles, weld free-floating plate, weld single and multi-pass fillet welds, install studs, and post-welding operations., • Use MAG Drill, grinder, tension control gun, fillet gauge, MIG welder, carbon arc, oxyfuel hand torch, and plasma torch., • Understand and interpret fabrication drawings and welding procedure specifications., • Knowledge of machines and tools, including their designs, uses, and basic maintenance., • Knowledge of raw materials, production processes, quality control requirements, and other techniques for maximizing productivity., • Ability to read and understand information and ideas presented in writing., • Ability to use electronic devices such as iPad or tablet to complete work., • Exceptional communication skills, writing skills, interpersonal skills, and ethical mindset., • Adept to problem-solving and conflict resolution., • Basic mathematic skills are required., • Ability to pass a background check, drug screen, and physical. Physical Demands: • Ability to keep hand and arm steady while moving or holding hand and arm in one position., • Ability to quickly move hand, hand and arm, or two hands to grasp manipulate, or assemble objects., • Ability to see details at close range with or without prescription glasses., • Ability to bend, stretch, twist, or each with your body, arms, and/or legs., • Ability to make fast simple, repeated movements of the fingers, hands, and wrists, • Ability to coordinate two or more limbs while sitting standing or lying down. It does not Involve performing the activities while the whole body is in motion., • Ability to safely lift up to 50 lbs repeatedly, occasionally lift greater than 50 lbs with support of other team members., • Ability to stand on hard surfaces for 10+ hours a day, 5 days a week in steel or composite toed boots with metatarsal guards., • Ability to grasp and handle grinders, cutters, torches, and welding equipment for extensive periods of time Benefits and Compensation: This role is based out of our Barronett office. This position is eligible for profit sharing based on company performance in addition to other benefits that support the total well-being of you and your family. Some benefits include: • Comprehensive Insurance coverage, Medical, Dental, Vision, and more, • Wellness Program, • 401K with employer match, • Discounted company stock (Employee Stock Purchase Plan), • Profit Sharing, • Generous paid time off, • Growth opportunities through company sponsored leadership development courses and trainings This position is not eligible for sponsorship. All offers of employment are expressly contingent upon the satisfactory completion, in accordance with Company policy, of a pre-employment drug screening and background check. APi Group is committed to complying with all laws prohibiting discrimination in employment and to providing equal employment opportunity to applicants and employees without discrimination on the basis of sex/gender, age, disability, race, color, ethnicity, religion, creed, national origin, military/veteran status, or other protected characteristics as defined by local, state, and federal law. In keeping with this commitment, APi Group will provide reasonable accommodations in the application process to otherwise qualified applicants with a disability. Applicants who wish to request a reasonable accommodation of disability in connection with the application process should contact Total Rewards and People Services at 651-604-2882 or email PeopleResources@apigroupinc.us. All qualified applicants with LeJeune Steel Company will receive consideration for employment without regard to race, color, religion, sex, sexual orientation and gender identity, national origin, or status as a qualified individual with a disability or protected veteran.

Job Description Fitter/Welder Level II LeJeune Steel Company is focused on becoming the pre-eminent structural steel provider in North America focused on delivering large, complicated and fast-track projects. We are a group of forward-thinking, focused, knowledgeable individuals that are looking to grow our exceptional team. Our Core Promise: To Outdo. We tackle every project with uncompromising tenacity and unmatched mastery, making our customers’ vision a reality. Building the tallest, coolest, never-been-done-before buildings takes courage and strength. You have to be smarter than everyone else. Not just book smart, but hard knocks smart – living it smart. Because the best solutions to the trickiest problems don’t just happen. You get there by tackling the impossible, working around it, designing through it and engineering it into reality. And not just by doing it, But by Outdoing it. Our Values: • Caring and enduring relationships with others, • Honesty and integrity, • Excellence, nothing less, • Enjoying our work, • Safety, health and well-being of all of our employees, • Combining small company abilities with large company advantages What We Are: • Relentless, • Forward-Thinking, • Focused, • Strong, • Knowledgeable Description At LeJeune Steel Company, our people are our most important resource. We're looking for a highly skilled Fitter/Welder II who will layout, fit, and fabricate metal components to assemble structural forms for complex structures such as stadiums and skyscrapers. This position will use knowledge of welding techniques, metallurgy, and basic engineering requirements to potentially move into a shop lead. Responsibilities/Tasks of role: • Analyzes fabrication drawings and specifications to plan layout, assembly, and welding operations., • Work closely with quality control and third-party inspectors to meet project specifications and internal quality standards., • Inspects weld preps and joints to ensure proper fit-up using standard measuring instruments. Weld components in flat, or vertical positions., • Use proper hand tools such as oxy-fuel torch, plasma torch, and MIG welding equipment., • Heats, forms, and dresses metal parts, using hand tools, torch, or MIG welding equipment., • Determines required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques., • Develops templates and other work aids to hold and align parts., • Welds components in flat, vertical, or overhead positions., • Removes rough spots from the workpiece, using a portable grinder or scraper., • Conduct tests and inspections of products to evaluate quality., • Ensure the accuracy of components being fabricated., • Perform day-to-day basic maintenance on tools and equipment., • Operate overhead cranes daily and forklift as instructed., • Other duties as assigned by leadership. Qualifications: • Inspect material, drill, grind, cope, connect angles, weld free-floating plate, weld single and multi-pass fillet welds, install studs, and post-welding operations., • Use MAG Drill, grinder, tension control gun, fillet gauge, MIG welder, carbon arc, oxyfuel hand torch, and plasma torch., • Understand and interpret fabrication drawings and welding procedure specifications., • Knowledge of machines and tools, including their designs, uses, and basic maintenance., • Knowledge of raw materials, production processes, quality control requirements, and other techniques for maximizing productivity., • Knowledge of inputs, outputs, raw materials, waste, quality control, costs, and techniques for maximizing the manufacture and distribution of goods., • Knowledge of numbers, their operations, and interrelationships including arithmetic, algebra, geometry, and their applications., • Knowledge of complex fit-up (Miters, compound bevels, skewed connections, rolled material, and radiuses)., • Ability to run track torch and track welders., • Ability to perform Complete Joint Penetration (CJP) welds successfully., • Ability to read and understand information and ideas presented in writing., • Ability to use electronic devices such as iPad or tablet to complete work., • Exceptional communication, writing, interpersonal skills, and an ethical mindset., • Adept to problem-solving and conflict resolution., • Basic mathematic skills are required., • Ability to pass a background check, drug screen, and physical. Physical Demands: • Ability to keep hand and arm steady while moving or holding hand and arm in one position., • Ability to quickly move hand, hand and arm, or two hands to grasp, manipulate, or assemble objects., • Ability to see details at close range with or without prescription glasses., • Ability to bend, stretch, twist, or reach with your body, arms, and/or legs., • Ability to make fast, simple, repeated movements of the fingers, hands, and wrists, • Ability to coordinate two or more limbs while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion., • Ability to safely lift up to 50 lbs. repeatedly, occasionally lift greater than 50 lbs. with the support of other team members., • Ability to stand on hard surfaces for 10+ hours daily, 5 days a week, in steel or composite-toed boots with metatarsal guards., • Ability to grasp and handle grinders, cutters, torches, and welding equipment for extensive periods. Benefits and Compensation: This role is based out of our Barronett office. This position is eligible for profit sharing based on company performance in addition to other benefits that support the total well-being of you and your family. Some benefits include: • Comprehensive Insurance coverage, Medical, Dental, Vision, and more, • Wellness Program, • 401K with employer match, • Discounted company stock (Employee Stock Purchase Plan), • Profit Sharing, • Generous paid time off, • Growth opportunities through company sponsored leadership development courses and trainings This position is not eligible for sponsorship. All offers of employment are expressly contingent upon the satisfactory completion, in accordance with Company policy, of a pre-employment drug screening and background check. APi Group is committed to complying with all laws prohibiting discrimination in employment and to providing equal employment opportunity to applicants and employees without discrimination on the basis of sex/gender, age, disability, race, color, ethnicity, religion, creed, national origin, military/veteran status, or other protected characteristics as defined by local, state, and federal law. In keeping with this commitment, APi Group will provide reasonable accommodations in the application process to otherwise qualified applicants with a disability. Applicants who wish to request a reasonable accommodation of disability in connection with the application process should contact Total Rewards and People Services at 651-604-2882 or email PeopleResources@apigroupinc.us. All qualified applicants with LeJeune Steel Company will receive consideration for employment without regard to race, color, religion, sex, sexual orientation and gender identity, national origin, or status as a qualified individual with a disability or protected veteran.

Job Description Come join our growing manufacturing company DJS Manufacturing A Division of Wisconsin Stamping & Manufacturing MIG/TIG Welder Are YOU a highly motivated candidate? Are YOU a dedicated manufacturing professional with a sincere desire to go that extra mile for the customer? WE are a team of hardworking professionals that strives to be the best in the industry. ABOUT OUR COMPANY: We are a privately-held independent metal fabrication company that produces components used in a wide range of industries. Our goal is to provide products and services that meet our customers’ needs in a timely fashion with the highest level of quality and value. Our capabilities at DJS are constantly expanding and currently include CNC machining, full metal fabrication (laser, brake, welding), painting, integrated assemblies and more. Our facility includes the latest in manufacturing technology and equipment. Coming in 2027: A brand-new, state-of-the-art, fully air-conditioned facility! JOB DESCRIPTION: The Welder will perform the daily set-up and fabricate/weld (MIG and/or TIG) weldments in a variety of materials including carbon steel, stainless steel and aluminum, utilizing blue prints for set-up and inspection of parts to ensure customer specifications are met. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Set-up, lay-out, tack-up and weld sheet metal in constructing customer parts and components, • Tack and/or weld metal parts together using MIG and/or TIG welding, • Safely apply welds per specifications to produce completed product, • Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material, • Capable of porosity-free TIG welding and MIG welding QUALIFICATION REQUIREMENT: • 2+ years of MIG and/or TIG welding experience, • High School diploma or GED required, • Ability to set-up jobs from prints, • Good verbal and written communication skills, • Excellent attendance, • Positive, “can do” attitude THE FOLLOWING EXPERIENCE IS A PLUS BUT NOT REQUIRED: • A certificate from college or technical school is a plus, • Robot welding experience OUR REWARDS & RECOGNITION: Joining the DJS team means forging your career path as part of a successful growing company. We offer real opportunities for the individual ready to take the chance. We will train and provide support to ensure your success! This is a full time position in the competitive and challenging metal manufacturing field. The pay range/rate of pay for this position may vary depending on a number of factors including, but not limited to, the position offered, location, education, training and/or experience. In addition to base pay, we also offer excellent benefits, work-life balance and a collaborative team environment! Benefits include tuition reimbursement, health, dental, vision, and life insurance, short and long-term disability, generous 401(k) match, paid holidays and paid time off, a lucrative profit sharing program, employee and family activities throughout the year, and so much more! We are also offering a lucrative sign-on bonus $$$ for hired candidates. (all benefits are subject to eligibility requirements) Wisconsin Stamping wants all of its employees to succeed and encourages people of all backgrounds to apply. We’re proud to be an Equal Opportunity Employer, and you’ll be considered for this role regardless of race, color, religion, sex, national origin, age, sexual orientation, ancestry, marital, disabled or veteran status. We’re committed to fostering an environment where people of all lived experiences feel welcome. Persons with disabilities who anticipate needing accommodations for any part of the application process may contact, in confidence hr@wisconsinstamping.com Are you enthusiastic about this position and ready for a new challenge? Apply now! Equal Opportunity Employer NOTE: Staffing agencies, head hunters, recruiters, and/or placement agencies, please do not contact our hiring managers via email or phone or other methods.

Job Description Are you interested in working as a welder in an innovative environment? Would you like to work as part of a positive, productive team? Do you have previous experience with Tig, Mig and Laser? Then this unique role is the one for you! Rohde Brothers, Inc., located in Plymouth, WI would love for you to join our fantastic team- onsite in WI! Rohde Brothers has become a trusted resource in the construction arena- known for working together with our clients and providing excellent outcomes for them! You want to be part of who we are! We are seeking someone who does not require sponsorship to work in the US. Interested in learning more? Read here and then apply for this exciting opportunity! What would you do working in this role? • You would have the chance to work in a variety of welding techniques (Mig, Tig, STICK and Laser), • You'd have the chance to do some equipment maintenance, • Read and comprehend construction drawings and specs, • Mentor coworkers to enhance their skill sets, • Partner with other crews and their lead people (if off-site) What would you need to be able to do this job? • Experience in multiple welding techniques (Tig, Mig, STICK, Laser), • Strong communication skills, • Ability to meet production deadlines, • Technical degree in welding OR 3+ years welding experience What's in it for you? • Company- paid health insurance, • Generous PTO, • 401k with a match, • Continuing education It is Rohde Brother’s policy to recruit, hire, and promote qualified applicants without regard to race, creed, religion, age, sex, sexual orientation, gender identity or expression, marital status, national origin, disability or status as a protected veteran. If, as an individual with a disability, you need reasonable accommodation during the recruitment process, please contact hr@rohdebros.com . Rohde Brothers, Inc. is an equal opportunity/affirmative action employer. Powered by JazzHR uEfn5LKZH0

Job Description Welder / Fabricator (Full-Time, Day Shift) We’re looking for a skilled and reliable Welder/Fabricator to join a team that takes pride in quality work, supports one another, and values continuous growth. Our workplace is built on respect, teamwork, continuous improvement, and the belief that everyone’s contribution matters. If you’re someone who enjoys collaborating, learning, and building something meaningful, you’ll fit right in. Schedule: Monday through Thursday: 6:00 AM – 3:30 PM Friday: 6:00 AM – 10:00 AM This schedule supports a strong work-life balance, giving you long weekends to recharge. What You’ll Do: • Perform MIG and TIG welding across all positions with specification-compliant quality, • Read and interpret blueprints, written instructions, and verbal directions, • Collaborate with team members to fabricate and assemble metal structures, • Contribute to a positive, safety-focused, and respectful work environment What We’re Looking For: • Proven experience / background welding required, • TIG ASME Pressure Vessel Experience will be given priority consideration, • Experience with MIG and TIG welding techniques, • Ability to work both independently and as part of a team, • Strong attention to detail and commitment to craftsmanship, • Fabrication experience is highly valued and will be given priority Job Type: Full-time Benefits: • 401(k) with company matching, • Health, dental, and vision insurance, • Health savings account (HSA) & flexible spending account (FSA), • Employee assistance program, • Paid time off, • Referral program, • Career Development Program

Job DescriptionSTAINLESS PIPING SPECIALISTS NOW AN (ESOP) EMPLOYEE OWNED!! Stainless Piping Specialists (SPS) is accepting applications/resumes to fill welder positions who would enjoy working in a team-oriented environment for 1st or 2nd shifts, with a 4 day standard work week. Ready to start an exciting new career? Unlock your potential and start a new journey with SPS! At SPS, we share the values of respect, integrity, courage, growth, and passion. We want you to come see what we have to offer. Stainless Piping Specialists (SPS) is hiring Full & Part-Time welders to join our growing team. This is a great opportunity to work with a talented group. Qualifications: • Experience with MIG/TIG welding processes., • Detail-oriented., • Knowledge of standard welding equipment., • Interpreting/ Reading "blueprints"/ Drawings., • Able to assemble & weld pipe kit assemblies. Responsibilities, not limited to: • Welding of Stainless pipe manifolds., • Tack welding of subcomponents per drawings for the finish weld operation., • Interpret supplied "blueprints"/ Drawings., • MIG/TIG Welding of prefabricated/ prepped pipe assembly kits. Benefits: • ESOP (Employee Stock Ownership Plan)., • Paid Vacation., • Paid employee life insurance policy., • Paid Holidays., • 401K Match., • Offered Health, Dental, and Vision., • Paid short/long-term disability insurance., • 4-10's shifts available., • Efficiency Bonuses. Part-time positions are also available. Stop by & let's schedule a weld test today!!! This is a GREAT opportunity for someone seeking consistent employment who enjoys working in a team-oriented atmosphere. Stainless Piping Specialists (SPS) is now an ESOP producing the highest quality stainless steel manifold & pipe spool fabrications for various industries. Join our team of skilled individuals & experience what SPS has to offer. As an Employee-Owned company, you share in the success of everything that we accomplish at Stainless Piping Specialists!

Job Description Ace Precision is an internationally recognized supplier to the Aerospace, Power Generation, Defense and Space industries.Come watch your career take flight with Ace Precision! As part of our manufacturing team, you will play a critical role in driving our production success while upholding the highest standards of quality and precision. Our products support a wide range of advanced applications including commercial and business aviation, military aircraft and vehicles, and spacecraft! We take great pride in our craftmanship and technical excellence as we serve the Aerospace, Power Generation, Defense & Space, and Aftermarket Repair & Overhaul sectors.At Ace Precision, the sky’s the limit and has been for over 40 years! We are rapidly growing, and we want to add new team members to our talented team. Are you interested in joining a growing team with a culture of excellence, innovation, and quality? If so, apply today! **JOB SUMMARY: Join our team in Oconomowoc or Menomonee Falls, WI! Ace Precision is hiring a skilled GTAW/Tig Welder to perform manual Gas Tungsten Arc Welding (GTAW) operations on a diversified line of standard parts. If you’re looking for a reliable opportunity in a hands-on environment, we encourage you to apply! **ESSENTIAL DUTIES AND RESPONSIBILITIES: Works from and interprets sketches, routings, process control sheets, and sample parts to understand dimensions and tolerances of finished work pieces, sequence of operation, and setup requirements. Performs setup operations, positioning and manual GTAW operations on similar and dissimilar metal alloys. Certified to groove and fillet weld on 0.020” and 0.064” thick Stainless Steel, Nickel Alloy, and Cobalt Alloy material (17-4PH, Inconel 718, Haynes 188) per AWS D17.1 Class A. Demonstrates familiarity with welding symbols, terms, and definitions per AWS A2.4 and AWS A3.0. Assists in the development and revision of work instructions that govern Gas Tungsten Arc Welding operations. Applies thorough knowledge of welding equipment features, backup gas requirements, and the effects of parameter changes. Visually inspects all weldments; identifies potential indications; and sufficiently repairs and reports defects. **EDUCATION AND EXPERIENCE: High school diploma or general education degree (GED), with minimum of two years related experience and/or training, or equivalent combination of education and experience. **GREAT BENEFITS: Competitive pay and annual reviews Multiple shift options include day and night shifts with 10% shift premium and compressed work weeks Voluntary overtime opportunities Comprehensive benefits package: Medical, Dental, Vision, Short-Term & Long-Term Disability, and Life Insurance 401(K) Match up to 8% A Work-Life Balance Paid Vacation &Personal Time, and 9Paid Holidays Paid Parental Leave WellnessProgram Reimbursements Employee Assistance Program Safety & Wellness Reimbursement Tuition Reimbursement Leave all your personal tools at home Equal Opportunity Employer, including Veterans and Individuals with Disabilities. You should be proficient in: • Welding Setups for Production, • Deburring Experience, • High School / GED, • Blueprint Reading Machines & technologies you'll use: • TIG Welder

Job Description Description UBC Millwrights are seeking experienced Journeyman Millwrights to join our organization. If you are an experienced Millwright in the field of machine and conveyor installation/ rigging/ blue print reading/ welding and torch cutting this is your chance to advance your career. We will also consider Maintenance Technicians, Maintenance Mechanics, Heavy Diesel Mechanics and Auto Mechanics due to same or similar experience. We are nationally recognized as the largest Millwright organization for over a century, employing the most highly skilled and qualified millwrights in all of North America. We are affiliated with over 350 millwright construction contractors our region. Requirements As a Journeyman Millwright you will be responsible for the installation of and maintaining various types of industrial and commercial machinery, automotive robotic systems/ conveyor and rotating equipment. Organization Details Simply put, we are not a temp agency and we do not hire just anybody, we are highly selective and committed to hiring millwright journeymen and journeywomen who desire to be the best and most professional in their field of work! Organization Affiliates UBC Millwrights is a proud supporter of Helmets 2 Hardhats, we have in the past and continue to be one of the largest employers of Military Veterans returning home after serving our Country, utilizing many of the skills they have acquired while serving. Additional Requirements • Experience working as a Millwright, • Understanding of and ability to follow jobsite safety requirements, • Ability to work well with others in a crew, • Compliance to zero tolerance drug policy Benefits In addition to being a great career opportunity, we provide a highly compensational benefit package to the members and families of our organization, not only while working in the field but ensuring you very lucrative retirement benefits after a rewarding career with the UBC Minnesota and South Dakota Millwrights. • $ 45.00 per hour base wage, • $ 76.81 per hour total package, • Vacation pay, • Health Insurance, • Dental and Vision, • (MRA) medical reimbursement account, • Prescription drug plan, • Short-term disability benefits, • Defined benefit pension, • Defined contribution account, • Free Journeyman upgrade and skills training Must haves High school diploma or Ged and 2 forms of ID \nCompany Description welding certs and test needed for bridge work D11 cert, concrete form work experience also commercial doors and hardware experience and good general knowledge of quality work. welding certs and test needed for bridge work D11 cert, concrete form work experience also commercial doors and hardware experience and good general knowledge of quality work.

Job Description Welder / Metal Fabricator Level 1 Milwaukee, WI 1st Shift | Monday through Friday | 6:00 AM to 4:00 PM Paid overtime as needed Why you’ll want this job If you’re a MIG welder who likes variety, clean shops, and being trusted to run your own work, this is a solid long-term opportunity. You’ll work in a modern, well-organized fabrication facility with up-to-date equipment and steady projects. No chaos, no bouncing shifts, just consistent work and paid overtime when it’s needed. What you’ll be doing • Fabricate and weld structural metal components using MIG welding, • Read and interpret blueprints, CAD drawings, and shop sketches, • Run your own fabrication projects from layout through final weld, • Operate press brakes, rolls, saws, and other fabrication equipment, • Grind, clean, and finish parts to spec, • Troubleshoot fit-up or assembly issues as they come up, • Follow safety standards and keep a clean, organized work area What we’re looking for Required: • 3 or more years of MIG welding and metal fabrication experience, • Comfortable reading blueprints and multiple drawing formats, including CAD, • Experience with shop tools and equipment such as forklifts, press brakes, and hand tools, • Strong attention to detail and ability to work independently or as part of a team, • Ability to lift up to 75 pounds, including overhead lifting, • Reliable transportation, • High school diploma or equivalent, • Ability to pass a weld and fit-up test Preferred but not required: • Welding certification Physical requirements • Ability to stand, bend, lift, and weld for a full shift, • Good vision, including depth perception and close focus, • Ability to safely lift heavy materials above shoulder height What you get • Paid overtime, • Steady 1st shift schedule, • Clean, safe, and well-equipped facility, • Modern tools and machinery, • A team that values quality work and craftsmanship

Job Description Where metal meets momentum. Where bold ideas become the products everyone else wishes they built. Welcome to JR Metal Works, one of the fastest-rising names in American manufacturing. We combine precision engineering, modern fabrication technology, and true craftsmanship to create custom metal products built to last. As we continue to grow, we remain deeply committed to quality, safety, and continuous improvement—on the shop floor and beyond. At JR Metal Works, you’re not just filling a role. You’re joining a team that values integrity, teamwork, craftsmanship, and problem-solving. We invest in your growth so you can build a career with real impact. We offer competitive pay, a comprehensive benefits package, and clear opportunities for advancement in a company that’s moving forward—fast. Position Summary The Specialty Industries Welder is responsible for fitting, fabricating, and welding custom metal assemblies with a primary focus on ferrous materials such as carbon steel, mild steel, and structural steel. This position requires strong blueprint reading, precision fit-up, welding, and fabrication skills, with an emphasis on producing high-quality work while maintaining dimensional accuracy and production requirements. The Specialty Industries Welder interprets shop drawings, weld symbols, work instructions, and specifications to determine material requirements, assembly sequence, fit-up requirements, and welding procedures. The position performs welding and fabrication while maintaining structural integrity, dimensional accuracy, weld appearance, and overall product quality. The ideal candidate has experience in custom fabrication and ferrous welding, is comfortable working with varying material thicknesses and tight tolerances, and takes pride in producing clean, consistent, high-quality welds. Core Responsibilities • Read and interpret blueprints, shop drawings, weld symbols, work orders, and fabrication specifications to determine material requirements, dimensions, tolerances, weld requirements, and assembly sequence., • Fit, fabricate, tack, and weld custom carbon steel, mild steel, structural steel, and other ferrous metal components., • Perform MIG/GMAW and Flux-Cored/FCAW welding processes as required by the job, material, and welding procedure., • Prepare, clean, and position materials prior to welding to ensure proper weld quality and fit-up., • Lay out, position, align, and fit components using measuring tools, fixtures, clamps, jigs, and welding equipment., • Verify dimensions, alignment, and tolerances before, during, and after welding., • Inspect completed welds for quality, appearance, penetration, consistency, and conformance to specifications., • Identify and correct fit-up issues, weld distortion, warping, and alignment concerns before final welding., • Apply appropriate welding techniques to control heat input, weld distortion, shrinkage, and dimensional changes., • Perform grinding, cleaning, and weld preparation as needed to meet quality and finish requirements., • Operate shop equipment safely, including grinders, torches, welding equipment, positioners, overhead cranes, forklifts, and other fabrication equipment as trained and authorized., • Use precision measuring equipment such as tape measures, squares, calipers, levels, and other measurement tools to verify part dimensions., • Maintain clean, organized, and efficient work areas in accordance with 5S, safety, and housekeeping expectations., • Communicate material shortages, drawing questions, production concerns, quality issues, and equipment problems to supervision promptly., • Follow welding procedures, quality requirements, PPE requirements, and all applicable company safety procedures., • Support continuous improvement efforts focused on weld quality, productivity, efficiency, scrap reduction, and rework reduction., • Maintain consistent production while meeting established quality and scheduling expectations., • Take ownership of finished work and ensure completed assemblies meet customer and JR Metal Works standards. Qualifications & Skills Required • 2+ years of experience in custom metal fabrication and welding., • Strong experience reading and interpreting blueprints, shop drawings, weld symbols, and fabrication specifications., • Demonstrated experience welding ferrous metals, particularly carbon steel, mild steel, and structural steel., • Experience with MIG/GMAW and Flux-Cored/FCAW welding., • Ability to perform precision fit-up and welding on custom-fabricated components., • Ability to accurately measure, fit, align, and inspect fabricated components., • Experience identifying and correcting weld distortion, fit-up issues, warping, and alignment problems., • Strong attention to detail and commitment to producing clean, consistent, high-quality welds., • Must be clean, organized, dependable, and able to maintain an orderly work area., • Must own a welding helmet for completion of JR Metal Works' on-site welding test., • Must successfully complete the JR Metal Works welding assessment, which includes blueprint reading and a hands-on welding test. Preferred / Plus • Experience with precision or tight-tolerance custom fabrication., • Experience working with carbon steel, mild steel, and structural steel., • Experience working with varying material thicknesses., • Experience using precision measuring equipment., • Experience with grinding, weld preparation, and post-weld finishing., • Previous experience in a custom manufacturing, fabrication, or metalworking environment. Career Growth & Development JR Metal Works is committed to helping employees build long-term, rewarding careers. Each position is supported by a Position Information Sheet (PIS) that clearly outlines role expectations, skill milestones, and growth pathways. Position Information Sheets provide transparency into: • Performance and merit-based pay progression, • Skill and responsibility milestones, • Leadership growth and development opportunities, • Cross-training and internal advancement paths, • Training, certification, and professional development expectations Advancement at JR Metal Works is based on demonstrated performance, skill mastery, accountability, and alignment with company values. Employees are encouraged to actively engage with their Position Information Sheet and leadership team to track progress and plan their next career step. This job description is intended to describe the general nature and level of work being performed and is not an exhaustive list of all duties and responsibilities. Duties may change at any time with or without notice. Employment with JR Metal Works is at-will and may be terminated by either the employee or the Company at any time, with or without cause or notice, in accordance with applicable law. JR Metal Works is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all employees and applicants. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable laws. Employees are expected to comply with all company policies, safety procedures, and applicable federal, state, and local regulations. Nothing in this job description creates a contract of employment or guarantees compensation or advancement.

Job Description Where metal meets momentum. Where bold ideas become the products everyone else wishes they built. Welcome to JR Metal Works, one of the fastest-rising names in American manufacturing. We combine precision engineering, modern fabrication technology, and true craftsmanship to create custom metal products built to last. As we continue to grow, we remain deeply committed to quality, safety, and continuous improvement—on the shop floor and beyond. At JR Metal Works, you’re not just filling a role. You’re joining a team that values integrity, teamwork, craftsmanship, and problem-solving. We invest in your growth so you can build a career with real impact. We offer competitive pay, a comprehensive benefits package, and clear opportunities for advancement in a company that’s moving forward—fast. Position Summary The Multi-Process Welder is responsible for fitting, fabricating, and welding custom metal assemblies with a primary focus on ferrous materials such as carbon steel, mild steel, and structural steel. This position requires strong blueprint reading, precision fit-up, welding, and fabrication skills, with an emphasis on producing high-quality work while maintaining dimensional accuracy and production requirements. The Multi-Process Welder interprets shop drawings, weld symbols, work instructions, and specifications to determine material requirements, assembly sequence, fit-up requirements, and welding procedures. The position performs welding and fabrication while maintaining structural integrity, dimensional accuracy, weld appearance, and overall product quality. The ideal candidate has experience in custom fabrication and ferrous welding, is comfortable working with varying material thicknesses and tight tolerances, and takes pride in producing clean, consistent, high-quality welds. Core Responsibilities • Read and interpret blueprints, shop drawings, weld symbols, work orders, and fabrication specifications to determine material requirements, dimensions, tolerances, weld requirements, and assembly sequence., • Fit, fabricate, tack, and weld custom carbon steel, mild steel, structural steel, and other ferrous metal components., • Perform MIG/GMAW and Flux-Cored/FCAW welding processes as required by the job, material, and welding procedure., • Prepare, clean, and position materials prior to welding to ensure proper weld quality and fit-up., • Lay out, position, align, and fit components using measuring tools, fixtures, clamps, jigs, and welding equipment., • Verify dimensions, alignment, and tolerances before, during, and after welding., • Inspect completed welds for quality, appearance, penetration, consistency, and conformance to specifications., • Identify and correct fit-up issues, weld distortion, warping, and alignment concerns before final welding., • Apply appropriate welding techniques to control heat input, weld distortion, shrinkage, and dimensional changes., • Perform grinding, cleaning, and weld preparation as needed to meet quality and finish requirements., • Operate shop equipment safely, including grinders, torches, welding equipment, positioners, overhead cranes, forklifts, and other fabrication equipment as trained and authorized., • Use precision measuring equipment such as tape measures, squares, calipers, levels, and other measurement tools to verify part dimensions., • Maintain clean, organized, and efficient work areas in accordance with 5S, safety, and housekeeping expectations., • Communicate material shortages, drawing questions, production concerns, quality issues, and equipment problems to supervision promptly., • Follow welding procedures, quality requirements, PPE requirements, and all applicable company safety procedures., • Support continuous improvement efforts focused on weld quality, productivity, efficiency, scrap reduction, and rework reduction., • Maintain consistent production while meeting established quality and scheduling expectations., • Take ownership of finished work and ensure completed assemblies meet customer and JR Metal Works standards. Qualifications & Skills Required • 2+ years of experience in custom metal fabrication and welding., • Strong experience reading and interpreting blueprints, shop drawings, weld symbols, and fabrication specifications., • Demonstrated experience welding ferrous metals, particularly carbon steel, mild steel, and structural steel., • Experience with MIG/GMAW and Flux-Cored/FCAW welding., • Ability to perform precision fit-up and welding on custom-fabricated components., • Ability to accurately measure, fit, align, and inspect fabricated components., • Experience identifying and correcting weld distortion, fit-up issues, warping, and alignment problems., • Strong attention to detail and commitment to producing clean, consistent, high-quality welds., • Must be clean, organized, dependable, and able to maintain an orderly work area., • Must own a welding helmet for completion of JR Metal Works' on-site welding test., • Must successfully complete the JR Metal Works welding assessment, which includes blueprint reading and a hands-on welding test. Preferred / Plus • Experience with precision or tight-tolerance custom fabrication., • Experience working with carbon steel, mild steel, and structural steel., • Experience working with varying material thicknesses., • Experience using precision measuring equipment., • Experience with grinding, weld preparation, and post-weld finishing., • Previous experience in a custom manufacturing, fabrication, or metalworking environment. Career Growth & Development JR Metal Works is committed to helping employees build long-term, rewarding careers. Each position is supported by a Position Information Sheet (PIS) that clearly outlines role expectations, skill milestones, and growth pathways. Position Information Sheets provide transparency into: • Performance and merit-based pay progression, • Skill and responsibility milestones, • Leadership growth and development opportunities, • Cross-training and internal advancement paths, • Training, certification, and professional development expectations Advancement at JR Metal Works is based on demonstrated performance, skill mastery, accountability, and alignment with company values. Employees are encouraged to actively engage with their Position Information Sheet and leadership team to track progress and plan their next career step. This job description is intended to describe the general nature and level of work being performed and is not an exhaustive list of all duties and responsibilities. Duties may change at any time with or without notice. Employment with JR Metal Works is at-will and may be terminated by either the employee or the Company at any time, with or without cause or notice, in accordance with applicable law. JR Metal Works is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all employees and applicants. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable laws. Employees are expected to comply with all company policies, safety procedures, and applicable federal, state, and local regulations. Nothing in this job description creates a contract of employment or guarantees compensation or advancement.

Job Description Where metal meets momentum. Where bold ideas become the products everyone else wishes they built. Welcome to JR Metal Works, one of the fastest-rising names in American manufacturing. We combine precision engineering, modern fabrication technology, and true craftsmanship to create custom metal products built to last. As we continue to grow, we remain deeply committed to quality, safety, and continuous improvement—on the shop floor and beyond. At JR Metal Works, you’re not just filling a role. You’re joining a team that values integrity, teamwork, craftsmanship, and problem-solving. We invest in your growth so you can build a career with real impact. We offer competitive pay, a comprehensive benefits package, and clear opportunities for advancement in a company that’s moving forward—fast. Position Summary The Flex Welder is responsible for fitting, fabricating, and welding custom metal assemblies with a primary focus on ferrous materials such as carbon steel, mild steel, and structural steel. This position requires strong blueprint reading, precision fit-up, welding, and fabrication skills, with an emphasis on producing high-quality work while maintaining dimensional accuracy and production requirements. The Flex Welder interprets shop drawings, weld symbols, work instructions, and specifications to determine material requirements, assembly sequence, fit-up requirements, and welding procedures. The position performs welding and fabrication while maintaining structural integrity, dimensional accuracy, weld appearance, and overall product quality. The ideal candidate has experience in custom fabrication and ferrous welding, is comfortable working with varying material thicknesses and tight tolerances, and takes pride in producing clean, consistent, high-quality welds. Core Responsibilities • Read and interpret blueprints, shop drawings, weld symbols, work orders, and fabrication specifications to determine material requirements, dimensions, tolerances, weld requirements, and assembly sequence., • Fit, fabricate, tack, and weld custom carbon steel, mild steel, structural steel, and other ferrous metal components., • Perform MIG/GMAW and Flux-Cored/FCAW welding processes as required by the job, material, and welding procedure., • Prepare, clean, and position materials prior to welding to ensure proper weld quality and fit-up., • Lay out, position, align, and fit components using measuring tools, fixtures, clamps, jigs, and welding equipment., • Verify dimensions, alignment, and tolerances before, during, and after welding., • Inspect completed welds for quality, appearance, penetration, consistency, and conformance to specifications., • Identify and correct fit-up issues, weld distortion, warping, and alignment concerns before final welding., • Apply appropriate welding techniques to control heat input, weld distortion, shrinkage, and dimensional changes., • Perform grinding, cleaning, and weld preparation as needed to meet quality and finish requirements., • Operate shop equipment safely, including grinders, torches, welding equipment, positioners, overhead cranes, forklifts, and other fabrication equipment as trained and authorized., • Use precision measuring equipment such as tape measures, squares, calipers, levels, and other measurement tools to verify part dimensions., • Maintain clean, organized, and efficient work areas in accordance with 5S, safety, and housekeeping expectations., • Communicate material shortages, drawing questions, production concerns, quality issues, and equipment problems to supervision promptly., • Follow welding procedures, quality requirements, PPE requirements, and all applicable company safety procedures., • Support continuous improvement efforts focused on weld quality, productivity, efficiency, scrap reduction, and rework reduction., • Maintain consistent production while meeting established quality and scheduling expectations., • Take ownership of finished work and ensure completed assemblies meet customer and JR Metal Works standards. Qualifications & Skills Required • 2+ years of experience in custom metal fabrication and welding., • Strong experience reading and interpreting blueprints, shop drawings, weld symbols, and fabrication specifications., • Demonstrated experience welding ferrous metals, particularly carbon steel, mild steel, and structural steel., • Experience with MIG/GMAW and Flux-Cored/FCAW welding., • Ability to perform precision fit-up and welding on custom-fabricated components., • Ability to accurately measure, fit, align, and inspect fabricated components., • Experience identifying and correcting weld distortion, fit-up issues, warping, and alignment problems., • Strong attention to detail and commitment to producing clean, consistent, high-quality welds., • Must be clean, organized, dependable, and able to maintain an orderly work area., • Must own a welding helmet for completion of JR Metal Works' on-site welding test., • Must successfully complete the JR Metal Works welding assessment, which includes blueprint reading and a hands-on welding test. Preferred / Plus • Experience with precision or tight-tolerance custom fabrication., • Experience working with carbon steel, mild steel, and structural steel., • Experience working with varying material thicknesses., • Experience using precision measuring equipment., • Experience with grinding, weld preparation, and post-weld finishing., • Previous experience in a custom manufacturing, fabrication, or metalworking environment. Career Growth & Development JR Metal Works is committed to helping employees build long-term, rewarding careers. Each position is supported by a Position Information Sheet (PIS) that clearly outlines role expectations, skill milestones, and growth pathways. Position Information Sheets provide transparency into: • Performance and merit-based pay progression, • Skill and responsibility milestones, • Leadership growth and development opportunities, • Cross-training and internal advancement paths, • Training, certification, and professional development expectations Advancement at JR Metal Works is based on demonstrated performance, skill mastery, accountability, and alignment with company values. Employees are encouraged to actively engage with their Position Information Sheet and leadership team to track progress and plan their next career step. This job description is intended to describe the general nature and level of work being performed and is not an exhaustive list of all duties and responsibilities. Duties may change at any time with or without notice. Employment with JR Metal Works is at-will and may be terminated by either the employee or the Company at any time, with or without cause or notice, in accordance with applicable law. JR Metal Works is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all employees and applicants. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable laws. Employees are expected to comply with all company policies, safety procedures, and applicable federal, state, and local regulations. Nothing in this job description creates a contract of employment or guarantees compensation or advancement.

Job Description Overview Tradesmen International is immediately hiring experienced Welders for projects located in the Madison, WI area. This is a first shift opportunity, and the pay rate is $24/hour based on experience and skill level. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: Read and understand blueprints, geometrical call outs and weld symbols Use GMAW-P, GMAW-S, and GTAW to effectively weld weldments tanks and metal parts together per the weld process specification sheet Perform welding on a wide variety of metals and alloys including carbon steel galvanized steel stainless steel and aluminum Hand layouts of weldments Use fixtures gauges and jigs to manufacture welded parts to customer specifications Assist with creating work instructions Complete the first piece in process and final inspections using calipers height gauges protractors and tape measures Analyze weld processes and recommending process improvements Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job Description Where metal meets momentum. Where bold ideas become the products everyone else wishes they built. Welcome to JR Metal Works, one of the fastest-rising names in American manufacturing. We combine precision engineering, modern fabrication technology, and true craftsmanship to create custom metal products built to last. As we continue to grow, we remain deeply committed to quality, safety, and continuous improvement—on the shop floor and beyond. At JR Metal Works, you’re not just filling a role. You’re joining a team that values integrity, teamwork, craftsmanship, and problem-solving. We invest in your growth so you can build a career with real impact. We offer competitive pay, a comprehensive benefits package, and clear opportunities for advancement in a company that’s moving forward—fast. Position Summary The Welder/ Fitter – Ferrous Welding is responsible for fitting, fabricating, and welding custom metal assemblies with a primary focus on ferrous materials such as carbon steel, mild steel, and structural steel. This position requires strong blueprint reading, precision fit-up, welding, and fabrication skills, with an emphasis on producing high-quality work while maintaining dimensional accuracy and production requirements. The Fitter/Welder interprets shop drawings, weld symbols, work instructions, and specifications to determine material requirements, assembly sequence, fit-up requirements, and welding procedures. The position performs welding and fabrication while maintaining structural integrity, dimensional accuracy, weld appearance, and overall product quality. The ideal candidate has experience in custom fabrication and ferrous welding, is comfortable working with varying material thicknesses and tight tolerances, and takes pride in producing clean, consistent, high-quality welds. Core Responsibilities • Read and interpret blueprints, shop drawings, weld symbols, work orders, and fabrication specifications to determine material requirements, dimensions, tolerances, weld requirements, and assembly sequence., • Fit, fabricate, tack, and weld custom carbon steel, mild steel, structural steel, and other ferrous metal components., • Perform MIG/GMAW and Flux-Cored/FCAW welding processes as required by the job, material, and welding procedure., • Prepare, clean, and position materials prior to welding to ensure proper weld quality and fit-up., • Lay out, position, align, and fit components using measuring tools, fixtures, clamps, jigs, and welding equipment., • Verify dimensions, alignment, and tolerances before, during, and after welding., • Inspect completed welds for quality, appearance, penetration, consistency, and conformance to specifications., • Identify and correct fit-up issues, weld distortion, warping, and alignment concerns before final welding., • Apply appropriate welding techniques to control heat input, weld distortion, shrinkage, and dimensional changes., • Perform grinding, cleaning, and weld preparation as needed to meet quality and finish requirements., • Operate shop equipment safely, including grinders, torches, welding equipment, positioners, overhead cranes, forklifts, and other fabrication equipment as trained and authorized., • Use precision measuring equipment such as tape measures, squares, calipers, levels, and other measurement tools to verify part dimensions., • Maintain clean, organized, and efficient work areas in accordance with 5S, safety, and housekeeping expectations., • Communicate material shortages, drawing questions, production concerns, quality issues, and equipment problems to supervision promptly., • Follow welding procedures, quality requirements, PPE requirements, and all applicable company safety procedures., • Support continuous improvement efforts focused on weld quality, productivity, efficiency, scrap reduction, and rework reduction., • Maintain consistent production while meeting established quality and scheduling expectations., • Take ownership of finished work and ensure completed assemblies meet customer and JR Metal Works standards. Qualifications & Skills Required • 2+ years of experience in custom metal fabrication and welding., • Strong experience reading and interpreting blueprints, shop drawings, weld symbols, and fabrication specifications., • Demonstrated experience welding ferrous metals, particularly carbon steel, mild steel, and structural steel., • Experience with MIG/GMAW and Flux-Cored/FCAW welding., • Ability to perform precision fit-up and welding on custom-fabricated components., • Ability to accurately measure, fit, align, and inspect fabricated components., • Experience identifying and correcting weld distortion, fit-up issues, warping, and alignment problems., • Strong attention to detail and commitment to producing clean, consistent, high-quality welds., • Must be clean, organized, dependable, and able to maintain an orderly work area., • Must own a welding helmet for completion of JR Metal Works' on-site welding test., • Must successfully complete the JR Metal Works welding assessment, which includes blueprint reading and a hands-on welding test. Preferred / Plus • Experience with precision or tight-tolerance custom fabrication., • Experience working with carbon steel, mild steel, and structural steel., • Experience working with varying material thicknesses., • Experience using precision measuring equipment., • Experience with grinding, weld preparation, and post-weld finishing., • Previous experience in a custom manufacturing, fabrication, or metalworking environment. Career Growth & Development JR Metal Works is committed to helping employees build long-term, rewarding careers. Each position is supported by a Position Information Sheet (PIS) that clearly outlines role expectations, skill milestones, and growth pathways. Position Information Sheets provide transparency into: • Performance and merit-based pay progression, • Skill and responsibility milestones, • Leadership growth and development opportunities, • Cross-training and internal advancement paths, • Training, certification, and professional development expectations Advancement at JR Metal Works is based on demonstrated performance, skill mastery, accountability, and alignment with company values. Employees are encouraged to actively engage with their Position Information Sheet and leadership team to track progress and plan their next career step. This job description is intended to describe the general nature and level of work being performed and is not an exhaustive list of all duties and responsibilities. Duties may change at any time with or without notice. Employment with JR Metal Works is at-will and may be terminated by either the employee or the Company at any time, with or without cause or notice, in accordance with applicable law. JR Metal Works is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all employees and applicants. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable laws. Employees are expected to comply with all company policies, safety procedures, and applicable federal, state, and local regulations. Nothing in this job description creates a contract of employment or guarantees compensation or advancement.

Job Description The Scharine Group - Darien Fabrication Division is looking to hire an experienced fabricator. This position is located in Darien, WI - Monday thru Friday 6am-430pm, with some Saturdays. Responsibilites include operating machines such as a press brake, band saw, iron worker, shear, roller, plasma cutter and other basic power tools. The majority of the welding done here in Darien is MIG, but experience in TIG is encouraged. • Must be able to read a tape measure, take direction, operate independently, and blueprint reading., • Ability to produce quality products consistently, • Ability to operate the machines mentioned above (press brake, iron worker, etc., • Ability to operate forklifts, • Ability to follow instructions given both verbally and in written form, • Willingness to learn, • Must be reliable with a good work ethic, • Willing to work 50+ hours a week. Some Saturdays required You should be proficient in: • Blueprint Reading Machines & technologies you'll use: • MIG Welder, • TIG Welder, • Manual Grinder, • Press Brake, • CNC Plasma Cutter

Job Description TIG Welder Work for an industry leading casting manufacturer with a highly-competitive compensation and benefits package. SIGN-ON BONUS UP TO $2,500! Position – TIG Welder Job Location – Hartford, WI Starting Date – Immediate Need Employment Term – Direct Hire Employment Type – Full-Time Work Hours (Shift) – 12 Hour Days or Nights 6:00-6:00, 2-2-3 work week Starting Pay – Depends on Experience $30-35/hr, 7% Shift Premium for Night Shift Benefits –Medical Insurance-PPO & HDHP HSA within 61 days of your start date/ Dental & Vision insurance / Wellness Program/ Life Insurance / Short-term & Long Term disability/ Paid vacations plus 10 paid Holidays/ Quarterly Performance Bonus/ 401k Matching up to 5.5% / Tuition Reimbursement/ On-site Fitness center / On-site Chiropractor Required Education - High School Diploma Required Experience – One-year experience or more through either a foundry, fabrication manufacturer, or be certified by a technical institute. NADCAP welding experience and/or AWS Certified preferred. Under the direction of the Production Supervisor, a Welder (a.k.a Weld Operator) is responsible for operating and performing various welding techniques, MIG stick, TIG welding on a variety of metal alloys and customer parts. Welders are responsible for ensuring the parts are defect free, meet customer specifications. Responsibilities Comply with all safety and health guidelines, quality standard practices/procedures and housekeeping standards Operator will be required to set-up, adjust machines, and equipment in order to manually weld castings to an acceptable quality using TIG welding. Will receive instructions, and procedures for the job. Will organize and plan operational duties for the shift he/she is assigned. Perform all required quality tests, certifications, and production checks as required Operator will continually visually inspect product, record production as required, report/record scrap, and other various duties or rework as assigned. Set-up components for welding according to specifications. Weld and repair components while operating proper weld equipment in a safe manner. Work with engineering on PQR (Procedure Qualification record) and WPS (Welding Procedure Specification) Qualifications One-year experience or more through either a foundry, fabrication manufacturer, or be certified by a technical institute. NADCAP welding experience and/or AWS Certified preferred. Please send your resume to westbend@seekcareers.com. Call/text Carrie at 262-334-4030 or apply online at www.seekcareers.com. Keywords: TIG Welding PQR WPS About SEEK Careers/Staffing You are a person with unique skills, experience and education.When you want to be heard and when you want to be matched with great career opportunities that are right for you, you can count on SEEK Careers/Staffing, Inc. Since 1971, our professional staffing consultants have been Servicing Your Success®.You’ll find that the process is thorough and that your experience is personalized. SEEK Careers/Staffing is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, genetic, military status or any other basis prohibited by federal, state, or local law.

Job DescriptionPosition: Welder - 2nd Shift Location: Port Washington, WI Compensation: $21/hr-$25/hr Based on Experience PRIMARY RESPONSIBILITIES: • Execute fundamental welding tasks, including operating semi-automatic welder machinery and wire feeder, while visually discerning between acceptable and defective welds., • Adhere to mini process sheets, ensuring accurate completion of all necessary documentation and the adherence to parts specifications., • Utilize blueprints proficiently, identifying welding views, symbols, dimensions, beveling requirements, and interpreting Bill of Material (BOM) or component drawings., • Utilize a variety of hand and power tools, such as grinders, cranes, hoists, and precision measuring devices, effectively and safely., • Conduct self-inspections and manage basic hook-up and rigging tasks, employing chains and slings for hoisting when necessary., • Utilize various measuring equipment, including tape measures, squares, fillet weld gauges, and conversion charts, both standard and metric., • Demonstrate proficiency in identifying and employing a range of hand tools, such as wire brushes, pliers, wrenches, and magnetic drills, among others., • Identify metal types based on blueprints, schematics, or Bill of Material specifications., • Execute pre-heating and post-heating procedures, utilizing torches, temperature sticks, strikers, and heat-absorbent blankets as required., • Ensure accurate identification of parts and materials at all times., • Participate in random quality inspections to uphold ISO standards., • Maintain cleanliness and organization within the departmental workspace., • Adhere strictly to company policies regarding Personal Protective Equipment (P.P.E.) usage., • Follow established safety and health protocols, both job-specific and facility-wide, ensuring all tasks are performed safely., • Participate actively in safety and health training sessions, demonstrating competency in accordance with training received., • Bring attention to safety and health concerns, unsafe practices, and offer suggestions for improvement to management promptly.REQUIREMENTS:, • At least 6 months of prior welding experience and a willingness to learn new welding techniques., • 2 inch plate experience., • MIG welding experience. #wideeffect

Job Description Position: Seam Welder Pay: $29.00/hour Per-Diem: $150.00 Lodging offered as an advance for up to 2 weeks Industry: Shipyard / Marine Construction Job Description We are seeking experienced Seam Welders with strong FCAW welding experience in a shipyard or heavy industrial environment. Candidates must be comfortable fitting their own test plates, working from blueprints, using the metric system, and setting up and troubleshooting welding machines. Experience Requirements • Minimum 3 years of shipyard experience, OR, • 1–2 years of shipyard experience plus at least 5 years of heavy industrial experience. Welding & Testing Requirements, • Must have experience with FCAW (Flux-Cored Arc Welding)., • Candidates will test in 1G, 2G, and 3G positions on steel., • Must also complete a separate FCAW 4G test., • Testing includes vertical and horizontal welds using ceramic backing tape and ceramic wedges., • Certain test coupons will be X-rayed., • Candidates are responsible for fitting their own test plates. Qualifications, • Must be a U.S. citizen., • Must have an original or certified copy of U.S. Persons documentation available for testing and orientation., • Must be highly experienced with:, • Setting up, troubleshooting, and operating welding machines, • Metric layout and measurements, • Reading and working from blueprints, • Hand tools, • Grinding and joint preparation for NDT, • Surface and joint preparation for production welding, • Inspecting welds for defects, • Hot-work and Lockout/Tagout safety procedures Additional Requirements Candidates should arrive for testing with their own welding hood. Candidates must be comfortable working in an active shipyard environment, including climbing ladders, working from scaffolding, handling material, and following all applicable safety requirements. Ameri-Force Benefits: As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: • Industry Leading Pay, • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Referral Bonuses (available for specific jobs only) About Ameri-Force: Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker's compensation. In addition, we offer a comprehensive benefits package tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Note: The specific duties, skills, and qualifications may vary depending on program requirements and client site conditions. Employees must be willing to make reasonable adjustments to their tasks as needed. We are an equal opportunity employer and do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Job Description We are looking for a self-motivated and reliable employee. As a Pro Smoker TIG Welder you’ll be responsible for supporting the company’s production facility with the responsibilities that are included below. Primary Responsibilities: • Prepares work to be accomplished by gathering parts, subassemblies, tools and materials, • Position, align, fasten and install piping, fixtures or electrical components to form assemblies and subassemblies, • Run and install wires/wiring between electrical components and test same, • Assemble and install plumbing valves and fittings for pipes, fixtures and equipment and test same, • Position parts and subassemblies by using templates or blueprints, • TIG weld on stainless steel parts, • Record product and order information on specified forms and records, • Use forklift to move materials, • Comply with quality and safety programs, • Other duties as assigned Skills and Qualifications: • Strong attention to detail and quality workmanship, • Previous experience in production environment, • Previous forklift experience, • Basic math skills required, • Previous experience with light electrical assembly and plumbing, • Good finger and hand dexterity, • Physical requirements include lifting up to 50 lbs., bending, standing and climbing, • Ability to work independently or with a team, • Ability to work necessary overtime Monday through Thursday from 6:00am to 3:30pm, and Friday from 6:00am to 10:00am

Job DescriptionDescription: Position Summary: Fabricate metals into signs, sign cabinets, steel structural shapes, and coverings for structures. Duties include the cutting of metal stock to specified lengths using a variety of saws and saw lines; construction of product according to specifications; welding and prep of product for finish paint. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or ability required. • Ability to read and understand blueprints, drawings, written procedures, and verbal instructions., • Ability to visualize 3-Dimensional objects from 2-Dimensional drawings., • Utilize various machinery, welding equipment, and power tools to build products according to predetermined specifications and procedures., • Welding experience is required. Ability to produce strong, clean welds with wire feed welding equipment., • Conduct pre-job planning to have all the proper products and tools necessary for a successful installation., • Ability to provide feedback and suggestions for improving work efficiency. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing environment with exposure to fumes, airborne particles and moving mechanical parts. The noise level in the work environment is loud. Requirements: Minimum Education and Qualifications: • High school diploma/GED., • Must possess competence in welding, sheet metal shears, and misc. power tools associated with metal fabrication., • Basic reading, writing, and math skills., • Ability to accurately measure; use tape and scale rules within 1/32-inch accuracy., • Experience in forklift and overhead crane operation., • Welder certification is a plus and a requirement within a year of working in the position., • Accuracy and attention to detail., • Ability to effectively communicate and follow directives., • Eager to learn and improve upon professional skills., • Ability to maintain an effective work ethic without constant supervision. Physical and Mental Demands: Key to Frequency Codes: N/A = Not Applicable F = Frequently (2.5 – 5.5 hours per day) R = Rarely (less than 0.5 hours per day) C = Continually (5.6 – 8.0 hours per day) O = Occasionally (0.6 – 2.5 hours per day) Physical Requirements: • O Sit, • O Work with arms above shoulder, • C Stationary Stand, • C Repetitive Movement, • C Walk, • O Grasping or Pinching, • O Kneel/Crawl, • R Keyboard Use, • F Crouch or Squat F Pushing:, • Typical Weight: 5 lbs., • Maximum Weight: 25 lbs., • F Bend or Stoop, • F Lifting or Carrying:, • Typical Weight: 5 lbs., • Maximum Weight: 25 lbs., • F Twist/Turn/Pivot, • O Balancing, • R Climb (stairs, ladders) Sensory Requirements: • C Talking/Speaking, • C Hearing, • C Clear Close Vision, • (under 20 ft.), • C Clear Distance Vision, • (over 20 ft.), • C Depth Perception, • C Peripheral Vision, • C Distinguish Colors The mental and physical requirements described here are representative of those that must be met by an individual to successfully perform the essential functions of this position. This is not intended to be an all-inclusive list; other duties may be required. PSCO Kieffer, Inc. reserves the right to change or modify the employee’s job description whether orally or in writing, at any time during the employment relationship. PSCO Kieffer, Inc. may require an employee to perform duties outside his/her normal description. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job DescriptionDescription: Production Welder, Welder B (1st Shift, Full-Time) $21.00–$31.00/hour Schedule: Monday–Friday, 6:00am–2:00pm POSITION SUMMARY: Under the direction of the Team Lead or Plant Management Team, the Production Welder, will set up and tack weld a wide range of similar and dissimilar metals to make sub-assemblies for cylinders and swivels and set up sub arc and weld per Weld Procedure Specifications (WPS). ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Tack weld and sub arc weld parts per the appropriate weld procedure as supervised by a qualified welder., 2. Read and interpret shop routings, work instructions, and elementary blueprints., 3. Conduct computer functions on a day to day basis., 4. Set-up the job per the appropriate weld procedures and work instructions, 5. General maintenance – changing tips, liners, wire, gas, etc., 6. Clean and inspect all finished sub-assemblies as trained and receive final approval by a qualified welder., 7. Store finished sub-assemblies and un-used parts per proper procedures. Candidates may be asked to complete a weld test to verify your skills in welding processes, blueprint reading, material preparation, and quality control. MARGINAL RESPONSIBILITIES: 1. May be directed to perform other tasks due to a decrease in the work load, machine is down for maintenance or a critical need exists in another area., 2. Assist in other departments as needed. Requirements: EDUCATION AND EXPERIENCE: 1. High School Diploma., 2. Currently enrolled in Vocational/Technical school for welding or some welding experience preferred. QUALIFICATIONS AND SKILLS: 1. Flux core, sub-arc and MIG experience preferred., 2. Must be able to read blue print., 3. Manufacturing experience. PRE-EMPLOYMENT TESTING: All candidates selected for employment will be required to successfully complete pre-employment screening, which includes a background check and drug screening. Employment is contingent upon satisfactory completion of all required screening. What You’ll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: • Paid Time Off (PTO), • 10 paid holidays, • Medical, dental, and vision insurance, • HSA and FSA options, • Company-paid life and AD&D insurance, • Company-paid Short-term disability (STD), • Company-paid Long-term disability (LTD), • Employee Assistance Program (EAP), • 401k, • Benefit eligibility begins on the first day of the month following your hire date PI626bf55ee6f7-25405-40250044

Job DescriptionDescription: Build Your Future in Manufacturing At Gordon Aluminum, we don't just offer jobs—we build careers. Whether you have years of manufacturing experience or you're looking for a new opportunity to grow, we provide paid training, advancement opportunities, competitive wages, and a team-focused culture built on our GRIT values: Growth • Reliability • Initiative • Teamwork Shape Aluminum Products Bring your fabrication experience to a growing manufacturer. This position may be a great fit if you've worked as: • Press Brake, • Tube Bending, • Metal Fabrication, • Sheet Metal, • Structural Steel, • Laser Cutting, • Blueprint Reading Experience transfers well from: • Steel Fabrication, • Welding Shops, • Metal Manufacturing, • Sheet Metal, • Structural Steel You'll be doing things like: • Forming aluminum components, • Reading blueprints, • Setting up fabrication equipment, • Inspecting finished parts, • Maintaining quality standardsWhy Gordon Aluminum?, • Competitive Pay, • Union Opportunities (where applicable), • Advancement Opportunities, • Paid Training, • Overtime Available, • Stable Manufacturing Career, • Modern Equipment, • Safety-Focused Workplace, • Three Shift times available, • GRIT Culture (Growth • Reliability • Initiative • Teamwork)Requirements: We'd love to talk if you: ? Like physical work ? Enjoy working with a team ? Have warehouse or manufacturing experience ? Want a stable career ? Ability to learn new skills ? Demonstrates ability to follow processes and policies ? Motivated show up on time ? Have fabrication experience ? Enjoy working with precision ? Like problem solving Possible Gordon Positions • Bender Operator, • Bender Setup, • Tube Laser Operator, • Robotic Welder

COMPANY OVERVIEW:\n \nNelson Global engineers, manufactures, and distributes clean and efficient Air & Fluid Transfer, NVH, Complex Structural, Acoustic, and Thermal Management Solutions. Nelson Global partners with the world's leading OEMs. With 21 global manufacturing and distribution facilities and unparalleled engineering and innovation capabilities, Nelson Global provides mission critical solutions with the highest degree of reliability at the lowest cost. Our dedication to serving our employees, partners, and the planet responsibly is realized across three pillars of sustainability: environmental, social, and governance. By empowering our people, reducing waste, and developing innovative and efficient systems, we support the communities and resources that spur the industries and technologies of the future.\n \n Pay Rate: $20 - $24.00 / hour\n \n HOURS: Monday - Thursday (4 x 10 hours): 1st shift 5a-3:30p; overtime as needed on Friday\n \n POSITION OVERVIEW: The Welder is responsible for welding production orders or components using MIG, TIG, robotic processes to meet customer and quality specifications. This involves using training or knowledge of welding techniques, knowledge of set-up requirements and meeting established production requirements on a consistent basis.\n \n PRIMARY ACCOUNTABILITIES:\n \n\n • Assemble parts to complete units and component parts in a specialized area\n \n, • The ability to perform all the following processes: Fixture Weld Inner Assemblies, Insulation Wrapping, Auto-Welder Operations, End of Cell Checking Fixtures, Air testing\n \n, • May use templates, fixtures, surface plate, calipers, snap gauges, or other inspection tools to measure welded components, bead size, or other necessary dimensions per blueprint. Watches for presence of burn through, cold starts, lack of penetration, bead size, or other indications of suspect welds.\n, • Set up and operate assigned machines to produce finished product in a final assembly\n, • Perform a variety of specialized assembly operations such as jigging, air testing, v-bands and component parts.\n, • Utilize hand tools, power tools and other special equipment within department\n, • Cleanings and inspecting of all parts\n, • Complete proper paperwork per station\n, • Participate in the corrective action process to prevent defects from recurring.\n, • Follow procedures consistently to obtain repeatability.\n, • Participate in team meetings seeking continuous improvements for the operation.\n, • Observe all safety and OSHA procedures and standards. Maximum lifting of 25lb without assistance. PPE is required at times.\n, • Keep work area safe and clean (6S: Safety, Sort, Straighten, Shine, Standardize, Sustain)\n, • Assume responsibility for quality workmanship that meets and/or exceeds customer expectations.\n, • Perform other duties as directed by the supervisor/lead\n\n Job Requirements:\n \n\n • Must remain current on all welding methods required by NGP or our Customers.\n, • Must have demonstrated mechanical aptitude, proficiency in shop math (fractions, decimals, metric), ability to read and follow specific routing instructions, ability to read and understand setup instructions, ability to read blueprints, proficiency in the use of appropriate measuring instruments (tape measure, dial calipers), ability to check quality of parts against templates.\n, • Must pass the Nelson Global Weld Test.\n, • Must have demonstrated ability to handle production requirements and demonstrated problem solving ability from previous work.\n\n Physical Requirements:\n \n\n • Must have the ability to stand for 10-hour shift.\n, • Able to bend, reach, twist, stoop, and walk to remove parts from baskets and lift to work area.\n, • Able to load parts into work area and complete baskets without damaging the part.\n, • Good hand and eye coordination.\n, • Ability to lift 25 lbs.\n\n Inclusive Benefits Package:\n \n\n • Medical, Dental, and Vision Coverage\n, • Wellness Program\n, • 401K Retirement Plan with Match\n, • Company-Paid Short-Term Disability (STD)\n, • 10 Holidays\n, • Paid Time Off\n, • Company-Paid Life Insurance\n, • And More!\n\n \n \nEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities\n \n This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Entry Level or Experienced Welder/Fabricator (2nd Shift, Full-Time) $21.00–$31.00/hour + $1.50/hour Shift Premium Schedule: 2nd shift: Monday–Thursday, 2:00pm–12:00am POSITION SUMMARY: Under the direction of the Team Lead or Plant Management Team, the Welder will set up and tack weld a wide range of similar and dissimilar metals to make sub-assemblies for cylinders and swivels and set up sub arc and weld per Weld Procedure Specifications (WPS). ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Repair of weld flaws/leakers from assembly., 2. Tack and weld parts per the appropriate weld procedure., 3. Clean and inspect all finished sub-assemblies as trained., 4. Store finished sub-assemblies and un-used parts per proper procedures., 5. Read and interpret shop routings and prints., 6. Set-up the job per the appropriate weld procedures and work instruction using fixtures and jigs where applicable., 7. Perform and obtain the first part piece inspection., 8. General maintenance – changing tips, liners, wire, gas, etc., 9. When job is complete, return tools, fixtures, etc. to the proper locations. Candidates may be asked to complete a weld test to verify your skills in welding processes, blueprint reading, material preparation, and quality control. Requirements: EDUCATION AND EXPERIENCE: 1. High school diploma or equivalent., 2. (2) Two years associate degree in Welding with one or more years in a variety of welding techniques. LICENSES AND CERTIFICATIONS: 1. Must be able to pass the JARP Industries weld certification test., 2. Required to pass all weld certification tests within 2 years of hire. Each weld process is re-certified at 3-year intervals., 3. May be directed to perform other tasks due to a decrease in the workload, machine is down for maintenance or a critical need exists in another area. QUALIFICATIONS AND SKILLS: 1. Welding experience is a must in flux core, sub-arc and MIG., 2. Must be able to read blueprint., 3. Manufacturing experience. PRE-EMPLOYMENT TESTING: All candidates selected for employment will be required to successfully complete pre-employment screening, which includes a background check and drug screening. Employment is contingent upon satisfactory completion of all required screening. What You’ll Love About Working Here We offer a full, comprehensive benefits package designed to support you and your family, including: • Paid Time Off (PTO), • 10 paid holidays, • Medical, dental, and vision insurance, • HSA and FSA options, • Company-paid life and AD&D insurance, • Company-paid Short-term disability (STD), • Company-paid Long-term disability (LTD), • Employee Assistance Program (EAP), • 401k, • Benefit eligibility begins on the first day of the month following your hire date PIde34e73a85ac-25405-41107758

Job DescriptionDescription: The Robotic Welding Operator performs welding operations on automatic electric-arc welding machines to produce standard and repetitive parts while following established safety, quality, and production procedures. This position works under close supervision and is responsible for maintaining quality and dimensional accuracy. Hours: 2pm-12am Monday-Thursday Key Responsibilities • Operate automatic electric-arc welding machines to complete standard and repetitive welding operations., • Change fixtures and make machine adjustments according to established instructions and supervisor direction., • Follow department procedures and quality requirements., • Monitor work for quality and dimensional accuracy and report concerns to the supervisor., • Work effectively with Tool Makers and other departments to support production requirements., • Follow the company’s Quality Policy, ISO requirements, and safety procedures., • Perform additional duties as assigned by the Robotic Welding Leadman or supervisor.Requirements: Qualifications Required • High school diploma or equivalent., • Basic knowledge of welding techniques., • Ability to use basic measurement and inspection tools, including rules, squares, protractors, templates, and gauges., • Basic mathematical skills, including addition, subtraction, multiplication, division, averages, ranges, and trends., • Ability to lift and/or move up to 50 pounds., • Ability to work effectively in a team environment. PI045f10444966-25405-41603161

Job Description Engineering Project Manager – Custom Automation Position Summary We are seeking an experienced Engineering Project Manager to lead the execution of custom automation and automated machinery projects from concept through installation and customer acceptance. This role requires a strong mechanical engineering background, hands-on experience with automated equipment, and proven success managing complex technical projects in a fast-paced manufacturing environment. The ideal candidate is highly organized, technically proficient, and capable of coordinating cross-functional teams while maintaining project schedules, budgets, and customer expectations. Key Responsibilities • Lead and manage custom automation projects from kickoff through final commissioning and customer sign-off, • Serve as the primary point of contact for customers throughout project execution, • Coordinate internal engineering, manufacturing, assembly, controls, purchasing, and field service teams, • Develop and maintain project schedules, budgets, milestones, and resource plans, • Conduct project review meetings and provide regular status updates to leadership and customers, • Review engineering designs and ensure technical requirements are met, • Manage project scope, change orders, risk mitigation, and issue resolution, • Support mechanical design reviews and collaborate with engineering teams on manufacturability and system performance, • Coordinate machine build activities, FAT/SAT activities, installation, and startup support, • Ensure projects are completed on time, within budget, and to customer quality expectations, • Maintain documentation including schedules, meeting notes, action items, and project reports, • Drive continuous improvement in project execution processes and communication Qualifications Required • Bachelor’s degree in Mechanical Engineering or relevant experience, • 3+ years of project management or project execution experience in custom automation, special machinery, or industrial equipment, • Strong background in automated machinery and manufacturing systems, • Experience managing projects involving mechanical, electrical, controls, and integration disciplines, • Proven ability to manage multiple projects simultaneously, • Strong understanding of machine design, fabrication, assembly, and commissioning processes, • Excellent communication, organizational, and leadership skills, • Proficiency with Microsoft Office and project scheduling tools Preferred • PMP certification or formal project management training, • Experience with robotic systems, material handling, vision systems, or assembly automation, • Familiarity with CAD software and engineering documentation, • Experience working directly with manufacturing customers and suppliers, • Ability to travel for customer meetings, installations, and project support as needed Desired Traits • Strong problem-solving and decision-making abilities, • Customer-focused mindset, • Ability to thrive in a fast-paced, deadline-driven environment, • Detail-oriented with strong follow-through, • Collaborative leadership style with the ability to influence cross-functional teams Compensation & Benefits • Competitive salary based on experience, • Performance bonus opportunities, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Career growth opportunities within a growing automation organization You should be proficient in: • GD&T, • Leadership / People Management, • Project Management, • CAD Software, • Mechanical Design & Engineering, • Vendor & Supplier Management Machines & technologies you'll use: • 3D Modeling (Solidworks, AutoCAD), • 2D Drawings (AutoCAD, Solidworks), • Robotic Welder, • Industrial Robot (Fanuc, Kuka, ABB, Universal Robotics, Yaskawa Motoman)

Job DescriptionMust be willing to travel/temporarily relocate to Portland, OR. Why Skilled Trades Professionals Choose AAA USA: • Competitive Pay., • Overtime Opportunities., • Long-Term Assignments., • Multiple U.S. Locations., • Relocation Assistance Available., • Referral Programs., • Medical, Dental & Vision Benefits., • 401(k) with Company Match., • Paid Time Off & Paid Holidays. Position Summary:AAA United States, Inc. has partnered with a company in Portland, Oregon that is the premiere West Coast shipyard for building large Jones Act compliant articulated tug barges, deck barges, dump scows, oil spill recovery vessels, crane barges hopper barges and more. Essential Functions: • Tack and fit steel components together in preparation for final welding., • Set up and operate welding equipment safely and efficiently., • Perform production welding on heavy steel components., • Perform assembly and disassembly of steel components, • Weld and fit in flat, horizontal, vertical, and overhead positions., • Read blueprints and execute precise layout and fitting work., • Inspect completed welds to ensure top-quality workmanship and specification compliance., • Remove slag and finish welds with attention to detail., • Troubleshoot minor welding equipment issues as needed., • Work safely and follow all company safety standards and procedures., • Collaborate with a hardworking team committed to quality and continuous improvement. Requirements: • Ability to weld structural steel and become certified using 1/16” flux core wire in all positions on unlimited thickness plate., • Ability to pass weld tests including:, • Fillet welds on 1" plate (2G, 3G, and 4G)., • Groove welds on 1" plate (2G, 3G, and 4G)., • Strong math and measurement skills, including fractions and tape measure reading., • Ability to operate a hand-cutting torch efficiently and produce quality cuts., • Blueprint reading and steel layout experience., • Ability to follow written and verbal instructions., • AWS D1.1 / D1.5, • Strong safety mindset and commitment to safe work practices., • Ability to work independently and as part of a team., • Desire to learn, improve, and build new skills continuously.

Job DescriptionDescription: Founded in 1973, Weldall Manufacturing, Inc., began with one welder and a vision; to provide the best in class service and quality products. Today, Weldall has grown into the preferred manufacturer of choice for clients around the world. Still family owned and operated by three generations, Weldall continues to grow through industry leading innovation and commitment to quality. Essential Duties and Responsibilities (Including the following, however, additional duties may apply as required) • Performs all tasks in a safe and responsible manner, • Sets up and operates power saws to cut, miter, and trim material according to specifications, • Selects and installs blade on machine, using hand tools, • Sets controls to adjust speed, feed rate, and blade tensions, • Positions guides, stops, holding blocks, or other fixtures to secure and direct material, • Mounts material in holding device, manually or using hoist, • Verifies dimensions of finished material using measuring devicesRequirements: Education and Experience • High school diploma or equivalent work preferred, • At least 2 years of experience as a saw operator, • Good math and blueprint reading skills required. Knowledge of converting between metric and standard units of measure preferred., • Experience with miter cuts preferred, • Ability to follow shop routings Mathematical Skills Ability to perform basic mathematical computations required. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Physical Demands Ability to move or transfer products with an overhead crane, forklift or stand-up may be required. Ability to lift up to 50 lbs. when required. While performing the duties of the job, the employee is regularly required to stand, walk and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. Benefits Weldall offers a highly competitive salary and benefits package starting after 30 days of employment that includes: • Free Direct Primary Care, Diagnostic Testing & Many Surgeries, • Company-paid Dental and Vision (no employee premiums), • Short-Term Disability and Life Insurance, • 401(k), Profit Sharing, Tuition Reimbursement, Company Events & Recognition Programs, and much more, • Weldall Manufacturing, Inc. is an equal opportunity employer.

Job DescriptionDescription: Quality Inspector (Fabrication & Welding)Join a Team That Takes Pride in Quality Craftsmanship Cutting Edge Fabrication is a leading metal fabrication company producing medium to large, complex weldments and fabricated assemblies for customers in transportation, defense, aerospace, construction equipment, and other demanding industries. For more than 30 years, we've built a reputation for quality, reliability, and tackling challenging projects. As we continue investing in our people, equipment, and capabilities, we're looking for skilled team members who want to help build the next chapter of our company's growth. Our priorities are simple: safety, quality, and on-time delivery. We believe those priorities help us take care of both our employees and our customers. If you're someone who takes pride in quality workmanship, enjoys solving technical challenges, and wants to help build a best-in-class fabrication operation, we'd like to talk with you. Position Summary Cutting Edge Fabrication is seeking a full-time Quality Inspector to support our fabrication, welding, machining, and final inspection processes. This position plays a critical role in ensuring our products meet customer specifications and industry standards. You will work closely with our fabrication, welding, machining, and engineering teams to verify quality throughout the manufacturing process—not just at final inspection. We're looking for someone with quality inspection experience or an experienced welder, fitter, machinist, or fabricator who has a strong understanding of print reading and quality requirements and is interested in building a career in quality. Responsibilities • Interpret engineering drawings, specifications, job routings, and customer requirements, • Perform inspections throughout the manufacturing process, including:, • Post fit-up, • Post weld, • Post machining, • Final inspection, • Inspect fabricated components and weldments to drawing and customer specifications, • Perform weld inspections in accordance with AWS and ASME requirements, • Verify dimensional accuracy using standard inspection equipment, • Document inspection results and maintain quality records, • Identify nonconforming product and communicate quality concerns to production and management, • Assist with root cause investigations and corrective actions, • Help maintain and continuously improve our quality management system, • Perform other quality-related duties as assignedRequirements: QualificationsRequired • Experience in quality inspection or metal fabrication, welding, machining, or manufacturing, • Ability to read and interpret blueprints and engineering drawings, • Working knowledge of GD&T, • Strong understanding of fabrication and welding processes, • Excellent math skills, including geometry and basic trigonometry, • Strong attention to detail and commitment to quality, • Good communication and teamwork skills, • Reliable attendance and strong work ethic, • Ability to lift up to 50 poundsPreferred, • Experience inspecting weldments to AWS D1.1 and/or ASME Section IX requirements, • Experience using precision measuring equipment including calipers, micrometers, height gauges, and other inspection tools, • Forklift and overhead crane experience, • Experience in a custom fabrication or job-shop environmentWhat We're Looking For, • Someone who takes pride in quality and craftsmanship, • A detail-oriented individual who enjoys solving technical problems, • A dependable teammate who communicates effectively with production personnel, • Someone who believes quality is built into the process—not inspected in at the end, • A professional who values safety, accountability, and continuous improvementCompensation & Benefits, • Competitive pay based on experience, • Health, dental, and vision insurance, • Paid time off and paid holidays, • Retirement benefits, • Opportunities for training, certification, and career growth, • Stable workload with a company committed to long-term success To learn more about our benefits, hiring process, and reasons to join our team, visit: www.cefabrication.com/careers Cutting Edge Fabrication is an Equal Opportunity Employer. We are committed to creating an inclusive workplace and prohibit discrimination and harassment of any kind. All employment decisions are based on qualifications, merit, business needs, and applicable law.

Job Description Maintenance Technician - Nights Night Shift Opportunity Sheboygan Falls, WI How can you make a difference at your job and can have the opportunity to grow? Join the Sheboygan Falls Team! In Sheboygan Falls we heavily support medical, food, and graphic arts customers with thin gauge plastic sheeting for thermoforming and printing applications. You’ve most likely seen a product that was made from materials from our plant—iTunes cards, Home Depot signs, even the covers of comic books. We are currently looking for associates to join our production teams to support our variety of customers. If you meet the qualifications and want to make a difference in a fast-paced environment with a company that has a large focus on safety and success, Spartech might be the ideal company for you. Job Summary The Maintenance Technician is vital part of a team. Responsible for safely completing maintenance assignments to build, repair and/or maintain all equipment in good operating condition as accurately as possible, while keeping associated costs to a minimum to help meet Plant goals. The Maintenance Team is multi-skilled and able to contribute to plant maintenance activities in a variety of craft disciplines. This position reports to the Sheboygan Falls Maintenance Manager. Essential Duties & Responsibilities • Completes projects with minimal guidance showing a proactive attitude to minimizing equipment down time and lost production capability., • Troubleshoots mechanical devices in operation. Dismantles and examines devices to gain access to and remove defective parts. Adjusts, repairs, or replaces defective parts., • Effectively communicates to fellow technicians and production staff verbally as well as email., • Sets up and operates shop machinery such as drill press, grinders, band saws, cutting torch, welder. etc. Uses hand tools and pneumatic tools to modify or repair parts and equipment., • Installs new or repairs/modifies electronic, hydraulic, and pneumatic equipment as needed., • Works to improve reliability and up-time of all equipment., • Operates forklift and aerial lift platform as needed., • Researches supplies, parts and tools needed to efficiently complete work orders., • Assists in identifying and maintaining an accurate inventory of parts by effective utilization of a CMMS., • Contributes to upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc., • Supports the vision, mission, and guiding principles of the company., • Follows applicable Safety, Health and Environmental rules and guidelines while performing job duties., • Maintains departmental housekeeping standards., • Other duties as assigned. Requirements Required Education and Skills: • Must have a high school diploma or equivalent., • Must have basic skills on use of computers: MS Office, Windows., • Must be able to navigate electrical, hydraulic, and pneumatic schematics and blueprints for planning and troubleshooting., • Must have math skills to add, subtract, multiply and divide and the ability to perform these operations using units of weight measurement, volume, and distance. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.), • Must have ability to reason and address complex problems., • Must have manual dexterity sufficient to operate a wide variety of hand tools, hand trucks, forklift, mechanical platforms and lifts, bench tools, welders, saws, drills etc., • Industrial Electrical experience including working with 3 phase motors, 480v and below. Years of Experience: • 5 years of prior experience in industrial maintenance, electrical, mechanical, or in a related field; or a combination of education and experience deemed equivalent Required Certification, Licenses, Registration: • Specific Craft Certification/Licenses a plus, • Technical education a plus Benefits We offer competitive salary, incentive, and benefit programs. Most Benefits Start Day ONE! Benefits include: • Medical, Dental, & Vision., • Company paid life and long-term and short-term disability programs., • Flexible spending accounts., • 401(k) with a strong matching program., • 120 hours Paid Time Off (pro-rated based on hire date)., • 11 paid holidays Spartech LLC, headquartered in Maryland Heights, Missouri is a leading manufacturing organization in the Custom Sheet & Roll Stock and Packaging industries with numerous locations throughout the United States. We have a broad customer base with extensive product offerings. Many of our materials are used in products you might see every day— for example if you start your morning with a yogurt or your child eats a single serving peanut butter—you may have already seen some of our materials. More unique uses of our materials can be seen in Military or security applications, for example, with bullet proof materials. From routine daily-life to life-saving applications—we make a difference. Our broad scope of products and services keep our environment interesting and challenging with a culture focused on success. Spartech, LLC provides equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, or veteran status, or other legally protected classification in the state in which a person is seeking employment. Spartech will use E-Verify to ensure employment eligibility of newly hired employees where required.

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI Shift: 2nd (5:00PM - 3:05AM, Monday - Thursday, 10 hours) Job description: To maintain pipe fabrication shop equipment and tools to help ensure that TEAM can operate effectively. Summary of Major Responsibilities/Duties: Must be able to read a hydraulic and electrical schematic. Trained in Proper Power Industrial Truck Operation. Must be knowledgeable to service, operate, and able to maintain piping and cutting equipment. Must be knowledgeable to service, operate, and able to maintain welding and fabrication equipment. Must be knowledgeable to service, operate, and able to maintain blast and metal surface preparation equipment. Must be knowledgeable to service, operate, and able to maintain overhead cranes and hoists. Must be knowledgeable to service, operate, and able to maintain blast and paint operation and equipment. Must be knowledgeable to service, operate, and able to maintain small tools (electrical, pneumatic, hydraulic, gas powered, hand tools.) Performing other job-related duties as assigned. Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: High school diploma and two years related experience and/or training or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups, customers, or employees of the organization. Ability to calculate figures and amounts such as decimals, percent, area, circumference, and volume. Ability to apply concepts of basic mathematics and fractions. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited, standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Requirements/ Key Competencies: Reliable and hard-working Team player Attention to detail Good verbal and written communication skills Self-motivated Willingness to learn An area of expertise related to two or three of the job duties. Equipment Used: Hand tools (e.g., hammer, screwdriver) Power tools (e.g., saws, welder, drill, grinders) Vehicles (e.g., automobile, truck, tractor, lift) Office equipment (e.g., computer, projector, copier) Physical Demands, Working Conditions and Work Environment: Indicate how often the following physical demands are required to perform the Essential job Responsibilities. C=Constantly F=Frequently O=Occasionally R=Rarely Physical Demands Standing C Walking C Sitting R Lifting F Carrying F Pushing F Pulling F Climbing O Balancing O Stooping F Kneeling F Crouching O Crawling O Reaching C Physical Strength Handling C Little Physical Effort – 10lbs or less C Grasping C Light Work – up to 20lbs C Feeling O Medium Work – up to 50lbs F Talking C Heavy Work – up to 100lbs O Hearing C Very Heavy Work– above 100lbs R Repetitive Motions F Eye/Hand/Foot Coordination C Environmental Conditions Extreme Cold R Extreme Heat O Temperature Changes O Wet O Humid C Noise F Vibration F Hazards C Atmospheric Conditions C

Badger Meter - Where Every Drop Counts and So Do You\n \n \nAt Badger Meter, we're more than a leading global water technology company - we're innovators with a mission: to preserve and protect the world's most precious resource. For over 120 years, our trusted solutions have enabled our customers to optimize the delivery and use of water, maximize revenue and reduce waste. \n \n \nEvery employee at Badger Meter is an important part of our success. Here, your work doesn't just move a business forward - it shapes a more sustainable future. We are committed to building a workplace where we celebrate differences, empower voices, and encourage fresh ideas that drive innovation. \n \n \nWhen you join us, you'll find:\n \n\n • Purpose-driven work that makes a real difference in communities around the globe.\n, • Career growth and development opportunities designed to help you achieve your potential.\n, • A supportive, inclusive culture where collaboration and creativity thrive.\n\n \n \nBe part of something bigger. At Badger Meter, your contributions will ripple far beyond the workplace - creating lasting change for people and the planet.\n \n What You Will Contribute:\n \n \nThis position is responsible for overall assembly process, including building, assembling, testing, injection molding and packaging a variety of meters or meter reading technology products. The work is completed through manual assembly, utilization of various specialty pieces of equipment, or automated machinery. Employees regularly rotate through various workstations within their home department and occasionally work in other areas of the facility depending on workload and customer orders. Responsible for observing safe work habits and maintaining cleanliness of work area.\n \n Job Duties:\n \n\n • Meter Assembly: - Perform a variety of operations such as assembly of meters, leak testing, meter testing, and packaging of meter products while following safety guidelines. - Assemble products, following work instructions ensuring the highest quality products, meeting company product standards, production goals, and customer specifications and delivery requirements. - Set up and operate meter accuracy and leak test equipment to determine acceptability of product. - Operate computer to check schedules, obtain part drawings, set up work procedures and update manufacturing status of jobs. - Work from dispatch lists or production schedules to obtain required daily output.\n, • Molding: - Perform a variety of tasks such as operation of plastic injection molding machines and perform secondary operations to molded parts such as degating, sprue removal and drilling. - May operate and tend to multiple machines simultaneously. - Follow work instructions ensuring the highest quality products, meeting company product standards, production goals, and customer specifications and delivery requirements. - Check parts visually and with the use of inspection tools, gauges, and coordinate measuring machines to ensure parts meet specified quality standards. - Operate computer to check schedules, obtain part drawings, set up work procedures and update manufacturing status of jobs. - Work from dispatch lists or production schedules to obtain required daily output. - Perform part counts and/or scale counts and prepare identification tickets for outgoing materials.\n, • Registration Assembly: - Perform highly varied register assembly, sub-assembly and test operations on electro/mechanical units. - Fit and assemble PC board assemblies along with register sub-assembly into register housing for various specialty application registration devices. - Work from simple assembly drawings, routings and standard procedures. - Use equipment such as small arbor press, screwdriver, nut driver, hand soldering iron, ultrasonic welder and computer-run test equipment. - Test assembled register for proper function and accuracy. - Assemble cartons and packages registers/generators for distribution according to customer specifications.\n, • Machining: - May operate and tend to multiple machines simultaneously. - Follow work instructions ensuring the highest quality products, meeting company product standards, production goals, and customer specifications and delivery requirement. - Check parts visually and with the use of inspection tools, gauges, and coordinate measuring machines to ensure parts meet specified quality standards. - Operate computer to check schedules, obtain part drawings, set up work procedures and update manufacturing status of jobs. - Work from dispatch lists or production schedules to obtain required daily output. - Perform part counts and/or scale counts and prepare identification tickets for outgoing materials. - Load, unload and debur parts.\n\n \n Education and Experience:\n \n\n • High School Degree/GED preferred\n, • 0-1 years of related experience preferred\n\n \n Qualifications:\n \n\n • Ability to pass internal forklift and hazmat training required\n, • Basic proficiency with computers required\n, • Basic skills in math required\n, • Basic ability to read, write, and speak English preferred\n\n \n Competencies:\n \n\n • Work Standards: Setting high standards of performance for self and others; assuming responsibility and accountability for successfully completing assignments or tasks; self-imposing standards of excellence rather than having standards imposed.\n, • Initiating Action: Take prompt action to accomplish work goals; take action to achieve results beyond what is required; be proactive.\n, • Communication: Convey information and ideas clearly and concisely to individuals or groups in an engaging manner that helps them understand and retain the message; listen actively to others.\n, • Collaboration: Work collaboratively with others across the organization to achieve shared objectives.\n\n \n Working Conditions:\n \n\n • Work is performed in a manufacturing environment.\n, • Must be able to wear personal protective gear most of the day.\n, • Must be able to lift up to 60 pounds.\n, • This position requires good manual dexterity, coordination and stamina.\n, • Must be able to stand or walk for prolonged periods of time.\n, • Must be able to pass an audiogram test.\nCompetitive Total Rewards at Badger Meter:\n \n\n • Competitive Pay\n, • Eligible for Annual Pay Increases\n, • Comprehensive Health, Vision, and Dental Coverage\n, • 15 days Paid Time Off + 11 Paid Holidays\n, • Two Ways to Save for Retirement: Badger Meter contributes 25 cents for every dollar you contribute to the plan, up to 7% of your eligible compensation. In addition to the match, the company will also contribute 5% of your eligible compensation to your Defined Contribution account on an annual basis. Additional access to a certified financial planner to help ensure your money is working for you, at no cost!\n, • Employer Paid benefits including: Employee Assistance Program (EAP), Basic Group Life Insurance, Short Term Disability, and more\n, • Educational Assistance - Tuition Reimbursement up to $5,250\n, • Voluntary benefits including: Additional Life Insurance, Long Term Disability, Accident and Critical Illness coverage\n, • Health Savings Account (HSA) & Flexible Spending Account (FSA) options\n\n \nAn Equal Opportunity/Affirmative Action Employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Applicants can learn more about their rights regarding equal opportunity in employment by viewing the federal "EEO is the Law" poster and the "EEO is the Law" poster supplement at http://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm\n \n \nBadger Meter complies with all aspects of the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local disability laws. This means that we will reasonably accommodate qualified employees with a disability if accommodation would allow them to perform the essential functions of their job, unless doing so would create an undue hardship. \n \n Privacy Statement\n \n \nThe Employee and Applicant Privacy Statement describes how we collect, use, share, retain, and safeguard applicant information. Please see the privacy statement on our website here.

Job Description This location is in Kaukauna, WI, relocation, or daily commute required. Location: Kaukauna, WI Shift: WEEKEND (Friday, Saturday & Sunday) Job description: To maintain pipe fabrication shop equipment and tools to help ensure that TEAM can operate effectively. Summary of Major Responsibilities/Duties: Must be able to read a hydraulic and electrical schematic. Trained in Proper Power Industrial Truck Operation. Must be knowledgeable to service, operate, and able to maintain piping and cutting equipment. Must be knowledgeable to service, operate, and able to maintain welding and fabrication equipment. Must be knowledgeable to service, operate, and able to maintain blast and metal surface preparation equipment. Must be knowledgeable to service, operate, and able to maintain overhead cranes and hoists. Must be knowledgeable to service, operate, and able to maintain blast and paint operation and equipment. Must be knowledgeable to service, operate, and able to maintain small tools (electrical, pneumatic, hydraulic, gas powered, hand tools.) Performing other job-related duties as assigned. Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor. Minimum Knowledge, Skills and Abilities Required: High school diploma and two years related experience and/or training or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups, customers, or employees of the organization. Ability to calculate figures and amounts such as decimals, percent, area, circumference, and volume. Ability to apply concepts of basic mathematics and fractions. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited, standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Requirements/ Key Competencies: Reliable and hard-working Team player Attention to detail Good verbal and written communication skills Self-motivated Willingness to learn An area of expertise related to two or three of the job duties. Equipment Used: Hand tools (e.g., hammer, screwdriver) Power tools (e.g., saws, welder, drill, grinders) Vehicles (e.g., automobile, truck, tractor, lift) Office equipment (e.g., computer, projector, copier) Physical Demands, Working Conditions and Work Environment: Indicate how often the following physical demands are required to perform the Essential job Responsibilities. C=Constantly F=Frequently O=Occasionally R=Rarely Physical Demands Standing C Walking C Sitting R Lifting F Carrying F Pushing F Pulling F Climbing O Balancing O Stooping F Kneeling F Crouching O Crawling O Reaching C Physical Strength Handling C Little Physical Effort – 10lbs or less C Grasping C Light Work – up to 20lbs C Feeling O Medium Work – up to 50lbs F Talking C Heavy Work – up to 100lbs O Hearing C Very Heavy Work– above 100lbs R Repetitive Motions F Eye/Hand/Foot Coordination C Environmental Conditions Extreme Cold R Extreme Heat O Temperature Changes O Wet O Humid C Noise F Vibration F Hazards C Atmospheric Conditions C

Job DescriptionDescription: Job Title: Weld Mill Operator- 2nd Shift ( 3pm -11pm) Department/Group: Production Reports to: Production Supervisor FLSA Status: Hourly/Non-Exempt Position Summary This mill position is expected to achieve targeted results in safety, production output and product quality. The Operator will operate various pieces of equipment and will perform a variety of duties to prepare material for storage or shipment. Must be able to demonstrate strong general mechanical skills. Must be trainable and be able to demonstrate acceptable levels of comprehension in the inspection processes. Need to be able to use measuring equipment, including micrometers and tape measures. Responsibilities • Participate in the plant safety initiatives, always work safely, identify and address unsafe acts and conditions, and practice expected housekeeping expectations while focusing on continuous process improvement using mill lean principles., • Work within area of responsibility through the use of visual management methods and take corrective actions as necessary to meet operating objectives such as product quality and production output expectations., • Be available to efficiently execute the production plan to ensure delivery to our customers on time., • Train in and consistently execute policies, procedures, work instructions, and manufacturing processes proficiently every day., • As directed by PTC leadership, maintain equipment, perform basic preventative maintenance and engage in equipment troubleshooting activities., • Embrace and participate in a mill operating culture that promotes involvement, communication, mutual trust and respect, expectations and accountability, and a passion for excellence., • Consistently demonstrate and own the Plymouth Tube values and behaviors to develop and transform the Company culture., • Eagerly participate in problem solving teams and kaizen events in order to improve operating performance. Duties • All tube welding mills safely operate to exceed or meet productivity and quality expectations. Along with setup and adjusting of all continuous tube weld mills., • Advises and assists welding operators on mill operations, setups, and adjustments. May make periodic inspection checks to determine type of adjustments., • Complete destructive and nondestructive tube quality checks as required and necessary., • Prepares various rolls, clamps, bars, and mandrels for changeovers or replacement., • Installs and reconditions electrodes., • Maintains perishable tooling and supplies as needed for the mill., • Maintains proper operating standards for the tooling and product and records it., • Maintains correct and continuous supply of strip steel from storage area to welder., • Operates any welder temporarily for relief purposes., • Performs the Standard Work Instructions (SWI’s) for the Welding Dept., • Operates cranes., • Make splice welds for continuous welding., • Hazardous waste management, • Perform other duties as assigned. Requirements: Qualifications • High School Diploma or GED is preferred., • Previous manufacturing experience is preferred., • To perform this job successfully, an individual must be able to perform all essential job duty satisfactorily., • Must be able to read, write and perform basic math calculations without difficulty or additional assistance., • Must be trainable and be able to demonstrate acceptable levels of comprehension on various types of equipment and machinery and various aspects of intricate production techniques., • Must be able to demonstrate strong general mechanical skills., • Must actively support, participate and positively embrace an empowered team culture and have excellent communication skills., • Must be able to concentrate in a dynamic work environment and be detail-oriented in order to maintain desired levels of quality, keep accurate accounts of time and production and achieve expected levels of throughput while maintaining a safe working environment. Work Environment • May be exposed to moderate noise intensity, • May be exposed to noise, dust, fumes, airborne particles, smoke (Not over OSHA permissible exposure levels), • Safety training and equipment are provided by Plymouth in accordance with applicable law, industry standards and company policy, • Will be required to wear applicable PPE Physical Demands The physical demands described here are representative of those that must be continually met on a daily basis by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hand to finger, handle, feel, talk and hear. The employee is continually expected to stand and walk for periods up to 10 hours (overtime as required) per shift with three 10-minute and one 20-minute break period. The employee must be able to do this without the aid of any physical or motorized devices. The employee is frequently required to reach with hands and arms, stoop, kneel, crouch, twist, or squat to work on equipment or perform manufacturing processes. This must be able to be done in a narrow or tight space if required. The employee must be capable of ascending and descending stairs to cross production lines and work on equipment. The employee must be able to step down un-assisted to work on equipment. The employee must occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: Job Title: Weld Mill Operator- 3rd Shift (11 PM- 7 AM) Department/Group: Production Reports to: Production Supervisor FLSA Status: Hourly/Non-Exempt Position Summary This mill position is expected to achieve targeted results in safety, production output and product quality. The Operator will operate various pieces of equipment and will perform a variety of duties to prepare material for storage or shipment. Must be able to demonstrate strong general mechanical skills. Must be trainable and be able to demonstrate acceptable levels of comprehension in the inspection processes. Need to be able to use measuring equipment, including micrometers and tape measures. Responsibilities • Participate in the plant safety initiatives, always work safely, identify and address unsafe acts and conditions, and practice expected housekeeping expectations while focusing on continuous process improvement using mill lean principles., • Work within area of responsibility through the use of visual management methods and take corrective actions as necessary to meet operating objectives such as product quality and production output expectations., • Be available to efficiently execute the production plan to ensure delivery to our customers on time., • Train in and consistently execute policies, procedures, work instructions, and manufacturing processes proficiently every day., • As directed by PTC leadership, maintain equipment, perform basic preventative maintenance and engage in equipment troubleshooting activities., • Embrace and participate in a mill operating culture that promotes involvement, communication, mutual trust and respect, expectations and accountability, and a passion for excellence., • Consistently demonstrate and own the Plymouth Tube values and behaviors to develop and transform the Company culture., • Eagerly participate in problem solving teams and kaizen events in order to improve operating performance. Duties • All tube welding mills safely operate to exceed or meet productivity and quality expectations. Along with setup and adjusting of all continuous tube weld mills., • Advises and assists welding operators on mill operations, setups, and adjustments. May make periodic inspection checks to determine type of adjustments., • Complete destructive and nondestructive tube quality checks as required and necessary., • Prepares various rolls, clamps, bars, and mandrels for changeovers or replacement., • Installs and reconditions electrodes., • Maintains perishable tooling and supplies as needed for the mill., • Maintains proper operating standards for the tooling and product and records it., • Maintains correct and continuous supply of strip steel from storage area to welder., • Operates any welder temporarily for relief purposes., • Performs the Standard Work Instructions (SWI’s) for the Welding Dept., • Operates cranes., • Make splice welds for continuous welding., • Hazardous waste management, • Perform other duties as assigned. Requirements: Qualifications • High School Diploma or GED is preferred., • Previous manufacturing experience is preferred., • To perform this job successfully, an individual must be able to perform all essential job duty satisfactorily., • Must be able to read, write and perform basic math calculations without difficulty or additional assistance., • Must be trainable and be able to demonstrate acceptable levels of comprehension on various types of equipment and machinery and various aspects of intricate production techniques., • Must be able to demonstrate strong general mechanical skills., • Must actively support, participate and positively embrace an empowered team culture and have excellent communication skills., • Must be able to concentrate in a dynamic work environment and be detail-oriented in order to maintain desired levels of quality, keep accurate accounts of time and production and achieve expected levels of throughput while maintaining a safe working environment. Work Environment • May be exposed to moderate noise intensity, • May be exposed to noise, dust, fumes, airborne particles, smoke (Not over OSHA permissible exposure levels), • Safety training and equipment are provided by Plymouth in accordance with applicable law, industry standards and company policy, • Will be required to wear applicable PPE Physical Demands The physical demands described here are representative of those that must be continually met on a daily basis by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hand to finger, handle, feel, talk and hear. The employee is continually expected to stand and walk for periods up to 10 hours (overtime as required) per shift with three 10-minute and one 20-minute break period. The employee must be able to do this without the aid of any physical or motorized devices. The employee is frequently required to reach with hands and arms, stoop, kneel, crouch, twist, or squat to work on equipment or perform manufacturing processes. This must be able to be done in a narrow or tight space if required. The employee must be capable of ascending and descending stairs to cross production lines and work on equipment. The employee must be able to step down un-assisted to work on equipment. The employee must occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

On-Site Job Fair with On-the-Spot Interviews, August 27th @ 10AM - 3PM\n \n Job Summary\n \n \nThis position will independently set-up, operate and troubleshoot one machine/equipment (Shear, PNL, Turret, Brake Press, Robotic Cell, Cut-to-Length, Roll Forming/Seaming, Press Lock). \n \n Duties and Responsibilities:\n \n\n • Set-up, thread the material through, and operate independently one machine (Shear, PNL, Turret, Brake Press, Robotic Cell, Cut-to-Length, Roll Forming/Seaming, Press Lock, Welder/Paint Booth).\n\n\n, • Follow daily manufacturing work orders giving special attention to various materials and add any specific notations needed.\n\n\n, • Assists with the operation of other machinery under close supervision.\n\n\n, • Assist with the packaging at the end of the line and as needed.\n\n\n, • Band and palletize metal coils and/or metal sheets, place tags/labels on finished product.\n\n\n, • Perform quality checks to verify proper lengths, widths, and weights are adhered to using the proper tools.\n\n\n, • Achieving production goals while complying with all safety requirements.\n\n\n, • Mounting and originating slitter knives, spaces, and guide discs for various specified coil widths; this includes adjusting clearances of knives and vertical/horizontal gapping (roll-former only).\n\n\n, • Adjust machinery by observation and using monitoring equipment feedback and perform quality control methods.\n\n\n, • Responsible for following all safety procedures including lockout/tagout and daily equipment inspection.\n\n\n, • Responsible for keeping work area in an orderly condition.\n\n\n, • Will be required to perform other duties as requested, directed, or assigned\n\n \n Required Knowledge/Skills/Abilities:\n \n\n • Must be 18 years or older.\n\n\n, • Highly motivated with a good, sound work ethic.\n\n\n, • Able to safely operate a sit-down forklift - training will be provided if necessary; all production employees must complete CCM's forklift certification program regardless of previous experience.\n\n\n, • Must demonstrate safe working practices and possess great attention to detail.\n\n\n, • Ability to follow CCM's policies, procedures, and processes.\n\n\n, • Good communication, organization, and time management skills.\n\n\n, • Basic computer, mathematics, and problem-solving skills; ability to use a calculator.\n\n\n, • Ability to use measuring devices (gauges, tapes, rulers).\n\n\n, • Team player that is able to follow instructions from both management and peers.\n\n\n, • Ability to learn and operate new equipment.\n\n \n Education and Experience: \n \n\n • Required:\n\n\n, • High School diploma or equivalent is required.\n\n\n, • Minimum of six (6) months of experience.\n\n \n Working Conditions:\n \n\n • Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels.\n\n\n, • Hours Worked: 40 hours per week; Shift: 3RD\n\n\n, • Days/Week: Su - Th, 10PM - 6AM\n\n\n, • Flexible to the possibility of overtime and weekend hours when required.\n\n Physical Requirements: \n \n OCCASIONALLY\n \n FREQUENTLY\n \n CONTINUOUSLY\n \n \n(0-30%) \n \n \n(31-60%) \n \n \n(61-100%) \n \n LIFTING OR CARRYING\n \n\n • 1-10 LBS\n\n \n X\n \n \n\n • 11-20 LBS\n\n \n X\n \n \n\n • 21-40 LBS\n\n \n X \n \n \n\n • 41-50 LBS\n\n \n X \n \n \n\n • 51 OR MORE LBS\n\n \n X\n \n PUSHING OR PULLING:\n \n\n • 1-40 LBS\n\n \n X\n \n \n\n • 41-50 LBS\n\n \n X\n \n \n\n • 51 OR MORE LBS\n\n \n X \n \n \nBENDING OR STOOPING \n \n X \n \n \nREACHING ABOVE SHOULDER LEVEL \n \n X\n \n \nDRIVING AUTOMATIC EQUIP. VEHICLES \n \n X\n \n \nOPERATE MACHINERY OR POWER TOOLS \n \n X\n \n \nCLIMBING (LADDERS, STAIRS, ETC.) \n \n X\n \n \nWALKING \n \n X\n \n \nSTANDING \n \n X\n \n \nSITTING \n \n X\n \n \nWORKING IN EXTREME TEMPERATURES \n \n X\n \n \nREPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS) \n \n X \n \n \nVISION \n \n X\n \n \nHEARING \n \n X\n \n \nDEXTERITY \n \n X\n \n \nHAND EYE COORDINATION \n \n X\n \n Personal Protective Equipment (PPE) Used: \n \n\n • Personal Protective Equipment is regularly required for this position which includes steel or composite toe boots, safety glasses, cut-resistant gloves and arm guards, and hearing protection.\n

Job Description Do you want to work in a clean, air-conditioned environment? Do you want to have 3-day weekends, every weekend? Do you want to be part of a team where we work collaboratively to achieve our goals? A company that invests in its equipment and its team members? Then Hydro-Thermal is the company for you! At Hydro-Thermal Corporation success is attributed to people who are committed to technical competence, are responsive to customers' needs, are friendly, are willing to work hard, have complete integrity, and are active in our industry and in the local communities. Essential Duties and Responsibilities: Perform all position welding on a wide range of similar and dissimilar metals and alloys requiring a high degree of skill and weld quality must that conforms to ASME code, dimensional, general inspection and test requirements. Work from drawings and job layouts. Requires a thorough knowledge of welding techniques, material characteristics. Other duties: • Welding using positioners, • Scheduled pipe-fitting/welding sch 10,40, • Stainless/carbon pipe welding, • Examines the materials to be welded to verify composition., • Reviews the assembly blueprints and accompanying shop order instructions to determine required welding mounts., • Determines the type of equipment and appropriate WPS, • Lay’s out, cuts and fits material for welding., • Reviews work both in progress and in a completed state as to quality and conformance to specifications., • Must display a core competency in the system skid fabrication process., • The welder must also be able to assist Engineering on any questions related to the WPS or fabricated components., • The welder will adhere to general plant safety/5S practices Preferred Education and/or Experience: • Five years of welding with preferred experience with austenitic, super austenitic and precipitation hardening stainless steels is preferred or relevant experience and/or education., • High School or GED is required Vocational Desired or relevant experience and/or education. Benefits: In addition to your base compensation, you are provided with a wide range of benefit programs which are designed to enhance the quality of your life, to provide protection and help when some of life's problems may occur. • Continuing Education/Tuition Reimbursement, • Vacation and Personal Time Off and paid Holidays, • Health, Dental and Vision Insurance, • 401k with company match, • Company provided Life/AD&D Hydro-Thermal is always on the lookout for exceptional people. We value innovative, growth-centric minded folks who have integrity and never stop being a customer advocate. EEO Statement Hydro-Thermal Corporation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. #LI-Onsite

Job Description API Heat Transfer is looking for people who enjoy being part of a transformation. Join Our Team as an Aluminum MIG & TIG Welder!About the Role Are you a skilled welder with a passion for precision and craftsmanship? We’re looking for an experienced Aluminum MIG & TIG Welder to join our dynamic team and help build high-performance heat transfer products, including condensers and cooling units. If you take pride in your work and thrive in a fast-paced manufacturing environment, we want to hear from you! What You’ll Do • Weld aluminum components using MIG and TIG techniques with accuracy and consistency, • Read and interpret blueprints and technical drawings, • Set up and operate welding equipment and tools, • Inspect welds for quality and compliance, • Collaborate with engineering and quality teams to resolve issues, • Maintain a clean and safe work environment, • Support continuous improvement in welding processes What We Offer You: • Opportunity to be part of a growing, transforming business., • Be part of leading-edge technology for the heat transfer industry, • Ability to impact customers across multiple industries., • Full health & welfare benefits, 401(k), PTO, and developmental opportunities!What You Bring, • 2+ years of aluminum MIG & TIG welding experience, • Ability to read blueprints and welding symbols, • Strong attention to detail and commitment to safety, • Welding certification preferred (e.g., AWS D1.2), • Team-oriented mindset and ability to work independentlyPhysical Requirements, • Ability to lift up to 50 lbs and work in various positions, • Manual dexterity and visual acuity for precision welding, • Exposure to heat, noise, and welding fumes (PPE provided), • Frequently required to sit/stand, talk and hear, use hands to finger, handle, or touch objects or controls., • Required to stand, walk, stoop, bend, and occasionally reach above shoulders.Why Join Us?, • Competitive pay and benefits, • Opportunities for growth and advancement, • Supportive team environment, • Work on industry-leading products that make a differenceReady to weld your future with us? Apply today and become part of a company that values craftsmanship, safety, and innovation. ECZWI

Job DescriptionABR is recruiting a 1st or 2nd shift MIG or TIG Welder in Wausau, WI. Enjoy 3 day weekends on 2nd shift! Pay: $20.00 - $22.00 per hour starting wage, based on experience. Schedule: 1st shift is Monday - Friday, 6:00 a.m. - 2:00 p.m. and 2nd shift is Monday – Thursday, 3:00 p.m. – 1:00 a.m.- 3 day weekends! Advancement Opportunity: Employees are eligible for a potential $1.00 per hour wage increase after 60 days based on performance and attendance. Additional pay increases are available through advancement within our Welder Level Program. Position Summary We are seeking a skilled and motivated TIG Welder to join our growing team. This position is responsible for producing high-quality welds on a variety of metal components while maintaining safety, quality, and productivity standards. The ideal candidate will have experience with TIG welding, strong attention to detail, and a commitment to craftsmanship. Essential Duties and Responsibilities • Perform TIG welding on stainless steel, aluminum, and other metals according to specifications and blueprints., • Read and interpret engineering drawings, work orders, and welding symbols., • Set up and operate welding equipment safely and efficiently., • Inspect completed welds to ensure quality standards are met., • Measure, cut, fit, and assemble materials prior to welding., • Maintain a clean and organized work area., • Follow all company safety procedures and quality control requirements., • Work collaboratively with team members to meet production goals., • Assist with additional fabrication and manufacturing duties as assigned.Qualifications, • Previous TIG welding experience preferred., • Ability to read blueprints and welding specifications., • Strong attention to detail and commitment to producing quality work., • Ability to use measuring tools and fabrication equipment., • Basic math and problem-solving skills., • Ability to work independently and as part of a team., • Reliable attendance and strong work ethic.Physical Requirements, • Ability to stand for extended periods., • Ability to lift up to 50 pounds regularly., • Frequent bending, reaching, kneeling, and repetitive hand movements., • Ability to work in a manufacturing environment with exposure to heat, noise, and welding fumes.ABR Employment Services is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veterans' status.PandoLogic. Keywords: Welder, Location: WESTON, WI - 54476 , PL: 604540760

Job Description API Heat Transfer is looking for people who enjoy being part of a transformation. Join Our Team as an Aluminum MIG & TIG Welder!About the Role Are you a skilled welder with a passion for precision and craftsmanship? We’re looking for an experienced 2nd Shift Aluminum MIG & TIG Welder to join our dynamic team and help build high-performance heat transfer products, including condensers and cooling units. If you take pride in your work and thrive in a fast-paced manufacturing environment, we want to hear from you! What You’ll Do • Weld aluminum components using MIG and TIG techniques with accuracy and consistency, • Read and interpret blueprints and technical drawings, • Set up and operate welding equipment and tools, • Inspect welds for quality and compliance, • Collaborate with engineering and quality teams to resolve issues, • Maintain a clean and safe work environment, • Support continuous improvement in welding processes What We Offer You: • Opportunity to be part of a growing, transforming business., • Be part of leading-edge technology for the heat transfer industry, • Ability to impact customers across multiple industries., • Full health & welfare benefits, 401(k), PTO, and developmental opportunities!What You Bring, • 2+ years of aluminum MIG & TIG welding experience, • Ability to read blueprints and welding symbols, • Strong attention to detail and commitment to safety, • Welding certification preferred (e.g., AWS D1.2), • Team-oriented mindset and ability to work independentlyPhysical Requirements, • Ability to lift up to 50 lbs and work in various positions, • Manual dexterity and visual acuity for precision welding, • Exposure to heat, noise, and welding fumes (PPE provided), • Frequently required to sit/stand, talk and hear, use hands to finger, handle, or touch objects or controls., • Required to stand, walk, stoop, bend, and occasionally reach above shoulders.Why Join Us?, • Competitive pay and benefits, • Opportunities for growth and advancement, • Supportive team environment, • Work on industry-leading products that make a differenceReady to weld your future with us? Apply today and become part of a company that values craftsmanship, safety, and innovation. ECZWI

Job Description We are looking for 2nd shift availability. Shift hours are Monday through Friday. Hours M-Th are 3:45pm to 3:15am and Friday hours are 3:45pm to 8:45pm • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed. • Perform visual inspection of material as required. • Perform layout checks as needed. • Perform rotational capacity tests on bolts prior to use in shop. • Work with outside inspectors to resolve quality issues on the floor. • Monitor welder qualification tests. • Monitor and record welding parameters to insure compliance to approved WPS. • Be able to read and understand the Welding code and Specifications. • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed. • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives? • Perform in a manner that will assure quality work flowing through the shop. • Work with welders and leadmen to maintain quality. • Be available, by use of a radio, etc. to perform needed checks. • Maintain a log of work done, and complete required reports. • Interpret the Specifications and applicable Codes. • Ability to be flexible to work either early or late within assigned shift as needed. • Coordinate inspection of QC hold points between production and DOT Inspectors. • Use and encourage safe working habits., • Must have CWI Certification, • NACE or BCI Certification is desired, • Ability to be conscious of Specifications and Company standards, • Ability to be organized and precise in maintaining a diary and reports, • Must have good people skills in dealing with difficult situations, • Ambitious person to help meet department and company goals and schedule. Competencies/Skills To perform the responsibilities, you must have the ability and skills to: • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules. • Coordinate your work with shipping department to assure loads have been inspected and ready to ship. • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop. • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time. • No accidents. A safe worker is an asset to both their fellow worker and the company. • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements. • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Monday through Friday. Hours M-Th are 3:45pm to 3:15am and Friday hours are 3:45pm to 8:45pm

Job DescriptionWe are looking for 2nd shift availability. Shift hours are Monday through Friday. Hours M-Th are 3:45pm to 3:15am and Friday hours are 3:45pm to 8:45pm: • Coordinate between Veritas Steel Production and DOT Inspectors to ensure DOT witnessing of production operations and QC hold points are being completed., • Perform visual inspection of material as required., • Perform layout checks as needed., • Perform rotational capacity tests on bolts prior to use in shop., • Work with outside inspectors to resolve quality issues on the floor., • Monitor welder qualification tests., • Monitor and record welding parameters to insure compliance to approved WPS., • Be able to read and understand the Welding code and Specifications., • Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed., • Develop improvements in the quality control process to facilitate flow of work through shop. Primary Responsibilities: How will you accomplish the Objectives?. • Perform in a manner that will assure quality work flowing through the shop., • Work with welders and leadmen to maintain quality., • Be available, by use of a radio, etc. to perform needed checks., • Maintain a log of work done, and complete required reports., • Interpret the Specifications and applicable Codes., • Ability to be flexible to work either early or late within assigned shift as needed., • Coordinate inspection of QC hold points between production and DOT Inspectors., • Use and encourage safe working habits., • Must have CWI Certification., • NACE or BCI Certification is desired., • Ability to be conscious of Specifications and Company standards., • Ability to be organized and precise in maintaining a diary and reports., • Must have good people skills in dealing with difficult situations., • Ambitious person to help meet department and company goals and schedule. Competencies/Skills: To perform the responsibilities, you must have the ability and skills to. • Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules., • Coordinate your work with shipping department to assure loads have been inspected and ready to ship., • Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop., • General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed. Measures of Success: Objective facts that demonstrate great performance. • Outstanding work record, great attendance record and always-on time., • No accidents. A safe worker is an asset to both their fellow worker and the company., • Increase throughput in the area that work being performed being able to streamline the required work and constantly making positive improvements., • Accept positive feedback from fellow workers and supervisors, on performance and competencies. HOURS - Monday through Friday. Hours M-Th are 3:45pm to 3:15am and Friday hours are 3:45pm to 8:45pm.

Job DescriptionStructural Welder (GMAW) – 2nd Shift Ameri-Force is hiring Structural Welders for a leading defense manufacturer in Oshkosh, WI. You'll weld large, heavy military vehicle components where weld quality and appearance matter. These are long-term roles with the opportunity to be hired directly by the client. Schedule • Paid training and certification on 1st shift: 6:00 AM – 2:30 PM, • After certification, move to 2nd shift: 2:30 PM – 11:00 PM, • 40 hours per week, with overtime available at the end of shift What You'll Do • Set up, tack and weld ferrous and nonferrous materials to the required welding procedures and codes, • Read and work from complex drawings and weld symbols, • Cut, grind, fit and bend parts to fit weldments, • Weld large components as part of a team, • Inspect and test your own welds to meet quality standards, • Clean, deburr, rework and repair welds to code, • Salvage and rebuild parts as directed What You Need • GMAW (MIG) certification, or 3–5 years of equivalent structural welding experience, • Ability to pass the client's structural weld certification (400 level). Testing may include AWS, ISO or MIL-STD standards, • Strong blueprint reading and weld symbol knowledge, • Comfortable with shop math and measuring tools: calipers, scales, squares, protractors, • High school diploma or equivalent, plus technical welding training, • Must be a U.S. Person under ITAR (e.g., U.S. citizen or permanent resident), • Willing to train on 1st shift and work 2nd shift long term Nice to Have • Experience welding large, heavy industrial equipment, • Experience with stainless steel filler metals Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: · Industry Leading Pay · Medical Coverage · Dental Coverage · Vision Coverage · Short Term Disability Benefits · Term Life Benefits · Referral Bonuses *Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker's compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com • Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. Pay:, • $26.13/hr during training, • $31.76/hr once certified, with the ability to grow to $32.91/hr, • $0.70/hr 2nd shift premium

Job Description Job Description: Pipefitter 1st Class Pay: $29.00 Per-Diem: $150.00 Bonus: $300 This position is responsible for using ratchets, sockets, combination wrenches, nut wrenches, and various other hand tools to install pipe fittings for testing and flushing of pipe systems. Responsible for using a hand torch for cutting and brazing. Running hoses from flushing equipment to piping systems on the ship. Fix threading of fittings and braze pipe fittings and pipe valves. A pipefitter is responsible, with some supervision, for installing, removing, repairing, targeting, laying out, fabricating, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. New install and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). The pipefitter is also responsible for providing direction to helpers as directed by the supervisor. Must be able to pass welder workmanship training with a 75% or higher. Test consists of the following: • Silver Braze, • CuNi pipe to bronze sleeve - vertical flow, Horizontal flow, • CuNi pipe to Carbon Steel Sleeve - vertical flow, horizontal flow, • Copper coupling to copper pipe - vertical flow, horizontal flow, • These test will be done semi restricted booth Safety & Environmental Factors: All employees are expected to adhere to the company’s safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes:, • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits

Job Description Welder #1 – First Shift Duties: • Perform TIG welding on materials, such as aluminum, stainless and galvanized steel, • Form sheet metal products, • Set up TIG welder for a larger variety of metals, • Read and interpret project plans, • Follow written and/or verbal instructions, • Operate forklifts, • Weld a variety of products Requirements: • Certificate in Welding or 1 year experience, required, • Must have the ability to read and interpret project plans, • Dedicated, focused and self-motivated, • Pre-employment welding test, basic math test, drug screening, lift test, and physical, required, • Completion of Culture Index Survey:, • https://go.cultureindex.com/p/o2Qg431aG1ZV Job Type: Full-time Pay: $29.60 per hour Benefits: • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • Vision insurance Application Question(s): • How many years of professional TIG welding experience do you have?, • Which of the following materials have you TIG welded (stainless steel, aluminum, galvanized steel?, • Are you comfortable reading fabrication drawings and performing general sheet metal fabrication in addition to TIG welding?, • Please complete our Culture Index survey (approximately 8–10 minutes). We ask every candidate to complete this brief survey as part of our hiring process. It helps us understand your natural work style and determine whether this position is a good fit for both you and KEES. Your application will not be considered complete until the survey has been submitted. Survey Link: https://go.cultureindex.com/p/o2Qg431aG1ZV Ability to Commute: • Elkhart Lake, WI 53020 (Required) Work Location: In person