Welding jobs in New York, New YorkCreate job alerts

Job Description *Inquire about other positions available* Mobile Trailer Technician needed in North Haledon, NJ and New Hampton, NY. Preferred experience: body work, brakes, ABS diagnostics, wiring, liftgates, welding, and fabricating This is a mobile position, a valid drivers license required Pay based on experience and overtime available, but not required Responsibilities: • Repair trailers, • Perform routine vehicle maintenance, • Perform quality inspections prior to returning the vehicle to the customer Qualifications: • Having experience in welding, construction, fabrication or mechanics is a plus but not required., • Knowledge of shop equipment a plus, • Strong mechanical aptitude and troubleshooting skills a plus, • previous work as a mobile technician is a plus Benefits: • Medical Insurance, • 401K, • Paid time off, • Paid holidays, • Uniforms provided Additional Information: • Day shift positions available for shop work and road service, • Overtime Available, but not required, • Different positions available including transport refrigeration service and repair as well as shop mechanics, • Looking for someone with mechanical, welding, and/or fabrication skills, • Willing to train, • Pay rate based on experience, • Medical Insurance, 401 K and paid time off available\nCompany Description North Jersey Trailer and Truck Service Inc. is a full-service trailer dealer serving the entire New Jersey and New York metropolitan area, including Long Island, we offer onsite repairs and maintenance as well as transport refrigeration service at your facility and at our two fully equipped shops. North Jersey Trailer and Truck Service Inc. is a full-service trailer dealer serving the entire New Jersey and New York metropolitan area, including Long Island, we offer onsite repairs and maintenance as well as transport refrigeration service at your facility and at our two fully equipped shops.

Job Description Do you want to build a career with a landscaping company that values you? Tired of working for a nationwide conglomerate where you are just a number? Do you desire to make a vital impact in your position? Then Horizon Landscape wants you! We have an opening for an Experienced Mechanic at our location in Wyckoff, NJ. This position is for a year-round Shop Mechanic, who is a self-starter and can perform services on a scheduled basis and repairs as needed. This is an opportunity for a well-rounded Mechanic capable of servicing fleet and small engine equipment. You need to be a mechanically inclined individual who excels at keeping things operating at peak performance. Maintenance Mechanic service technicians with at least 5 years experience need only apply. Our fleet includes over 35 trucks and trailers, as well as 100-plus pieces of small equipment that require servicing on a scheduled basis and repairs as needed. You will be responsible for maintenance and repair of small power equipment to include, cutoff saws, chainsaws, scag mowers, aerators, 4-stroke and 2-cycle engines. Demonstrated experience in servicing and repairing passenger cars, pickup trucks, 1-ton gas and diesel trucks, as well as medium-duty equipment such as Skid loaders, Excavator (12,000 lbs), Vibratory Plow / Trencher, and tow-behind air compressors. Other expected duties to perform include troubleshooting electrical problems, changing tires, light welding and shop and yard maintenance. It is a PLUS if you are bilingual in English and Spanish. At Horizon Landscape, we are a team of talented professionals committed to taking care of each other, our clients, and our communities. We employ team members who share our values, are self-starters, and able to make decisions that will improve their personal work environment, as well as their co-workers. Being in business for over 45 years, we have developed an excellent reputation with our clients, vendors, and in the community and landscape industry. If you want to be challenged professionally and play a significant role in growing our company, Horizon Landscape would like to speak to you today! We look forward to welcoming a dedicated professional who is ready to join our team and grow with us!

Job DescriptionBenefits: • Free uniforms, • Paid time off, • 401(k), • Competitive salary Twin Towing is seeking a seasoned Diesel Mechanic to join our dynamic team, focusing on maintaining our diverse fleet, including light and heavy-duty tow trucks, tractors, trailers, and various other types of heavy equipment. This is a full-time opportunity for a hands-on professional who takes pride in their workmanship and possesses a keen eye for detail. Key Responsibilities: • Perform preventative maintenance (PM) work and keep accurate records of routine maintenance to ensure operational efficiency., • Conduct diagnostics, identify malfunctions, and undertake necessary repairs with precision., • Efficiently replace and repair truck and trailer lighting systems and wiring, ensuring safety and compliance with regulatory standards., • Welding and fabrication tasks as needed to repair or modify equipment., • Utilize understanding of computer diagnostics to interpret and address error codes and system alerts., • Collaborate with other members of the maintenance team to efficiently complete tasks. Skills and Qualifications: • Proven experience as a Diesel Mechanic, with a comprehensive understanding of both light and heavy-duty vehicles and heavy equipment., • Must possess personal set of tools suitable for a wide range of maintenance and repair tasks., • Proficiency in welding and fabrication, with a knack for precision and safety., • Strong competency in using diagnostic software and interpreting computer-generated error codes., • Ability to perform physical tasks and lift objects as required by the job., • Excellent problem-solving skills and attention to detail., • Effective communication abilities, capable of working as part of a team and independently. We Offer: • Competitive salary commensurate with experience., • Generous benefits package including paid time off, 401(k) plan, health and dental insurance., • Provision of uniforms., • A supportive and dynamic work environment where your work and ideas truly make a difference. Join our team and contribute to the efficiency and reliability of our fleet, playing a crucial role in our success. If you are a dedicated Diesel Mechanic with the skills and experience we're looking for, apply today to become a part of our team! Please call (973) 390-2088 for additional information

Job Description Job Summary The Diesel Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of diesel-powered equipment, including heavy-duty trucks, construction machinery, and fleet vehicles. This role is critical to ensuring our equipment operates safely, efficiently, and reliably in support of daily operations. The successful candidate will work from our Clifton, NJ maintenance facility and collaborate closely with an experienced maintenance team consisting of one Lead Mechanic and two established Mechanics. This position offers the opportunity to work alongside skilled professionals in a well-equipped shop environment, contributing to the maintenance and performance of a large and diverse fleet. Why Join Let It Grow? • Work in a modern, fully equipped three-bay repair facility in Clifton, NJ., • Be part of a collaborative maintenance team that includes a Lead Mechanic and experienced technicians., • Support a large fleet of trucks, trailers, and heavy construction equipment., • Join a stable, growing organization with a strong reputation and over 40 years of industry success., • Opportunity for ongoing professional development and advancement within the organization. Key Responsibilities: • Inspect, diagnose, and repair diesel engines, including trucks, trailers, construction equipment, and other heavy machinery., • Perform routine maintenance such as oil changes, filter replacements, fluid checks, and preventative service inspections., • Troubleshoot and repair electrical, fuel, hydraulic, and mechanical systems to ensure optimal performance., • Use diagnostic tools and software to identify faults and verify repairs., • Maintain accurate service records and track completed repairs using internal systems., • Order necessary parts and maintain inventory levels for common repairs., • Communicate clearly with supervisors and operators regarding equipment status, repair needs, and timelines., • Ensure compliance with safety standards and maintain a clean, organized, and safe work environment., • Assist with seasonal maintenance, inspections, and equipment readiness. Qualifications: • High school diploma or equivalent; trade school or diesel technician certification preferred., • Minimum of 2 years’ experience working on diesel engines or heavy equipment., • Strong knowledge of diesel engines, hydraulic systems, electrical systems, and emissions systems., • Ability to read and interpret schematics, wiring diagrams, and service manuals., • Valid driver’s license with a clean driving record; CDL preferred or willingness to obtain., • Ability to lift up to 50 lbs and work in various weather and shop conditions. Preferred Skills • Experience with construction, heavy equipment, or fleet maintenance., • Knowledge of DOT inspection standards and regulations., • Welding and fabrication experience is a plus., • Familiarity with computerized diagnostic tools and fleet management systems., • Bilingual (Spanish/English) is a plus., • OSHA 10/30 certification preferred, or willingness to obtain.Company Description Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come. Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come.

Job DescriptionPRS Auto is seeking a safety-conscious Mechanic at the Norfolk Southern Doremus, NJ Rail Terminal auto facility in a recession-proof industry! This operation is responsible for unloading new automobiles off of railcars. You will be employed directly through PRS Auto and will not be an employee of the railroad. Hours:This is a 24/7/365 operation. This role is a full-time salary position working non-standard hours that may include nights, weekends, and holidays as required by the Customer. Occasionally, the role can require extended work hours, including being on call as needed. Candidates: • Should have a minimum of 2 years of experience in the mechanical field and be preventative maintenance minded., • Must have own tools (Yearly tool allowance provided)., • Must have experience and knowledge working with Air, Electrical, Hydraulic, and Diesel systems and components., • Will need a valid driver's license. Primary Responsibilities: • Diagnose and Repair Buck Ramps (Automobile railcar unloader ramps), • Preventive Maintenance., • Welding, fabricating., • Working on gasoline engines, diesel engines, hydraulics, & Electrical components., • Assist in other areas as needed by managers., • Must have verifiable mechanical experience., • Candidates must undergo a background check., • Must be able to pass a physical strength test., • Drug screening., • Required to join local union. Salary / Benefits: • Salary is commensurate with experience and will be discussed during the interview process, • Growth Opportunities + Incentives, • Affordable Healthcare, Free Dental, and cheap Vision Benefits., • Free Life Insurance, • Generous 401K plan, • Yearly Raises, • Bi-Weekly Pay, • Travel Opportunities, • Union Position, • As well as much more you'll find out when you join our team. Terminal Location: PRS Auto (NS Doremus Railroad) 861 Doremus Ave.Newark, NJ. 07105. Work EnvironmentCandidates must be able to work outdoors in all conditions, including hot temperatures. In addition, working on and around rail equipment and automobiles may be dangerous if not handled safely concerning the job functions. Understanding the work hazards and being able to work safely is imperative for this position. All qualified applicants will be given equal consideration regardless of race, age, sex, disability, sexual orientation, gender identity, marital status, color, religion, protected veteran status, or national origin.

Job Description Job Summary The Fuel & Grease Service Mechanic is responsible for traveling between construction and landscape job sites throughout New Jersey and New York to perform preventative maintenance, fueling, lubrication, inspections, and minor repairs on company-owned equipment and vehicles. This position plays a critical role in supporting field operations by ensuring equipment remains properly serviced, safe, and ready for daily production. The ideal candidate is self-motivated, organized, and comfortable working independently while maintaining strong communication with equipment operators, supervisors, and the maintenance team. Why Join Let It Grow? • Competitive compensation and overtime opportunities., • Work independently while supporting a large and growing fleet., • Exposure to a wide variety of construction and heavy equipment., • Opportunity for career advancement into senior maintenance and fleet management roles., • Be part of a company with more than 40 years of success serving the New Jersey and New York markets. Key Responsibilities: • Travel daily between company job sites throughout New Jersey and New York., • Fuel heavy equipment, fleet vehicles, and construction machinery., • Perform routine greasing and lubrication services on excavators, loaders, skid steers, trucks, trailers, and other equipment., • Conduct daily and weekly preventative maintenance inspections., • Check and maintain fluid levels, including engine oil, hydraulic oil, coolant, transmission fluid, and DEF., • Inspect equipment for leaks, wear, damage, and safety concerns., • Perform basic mechanical repairs and adjustments in the field when appropriate., • Identify maintenance issues and communicate repair needs to the Lead Mechanic and maintenance department., • Maintain accurate service logs, fuel records, and equipment inspection reports., • Coordinate with field supervisors to ensure equipment service schedules are met with minimal disruption to operations., • Maintain service truck inventory, including lubricants, filters, fueling supplies, and maintenance tools., • Adhere to all company safety procedures and DOT requirements., • Ensure a clean, organized, and professional service vehicle and work environment. Qualifications: • High school diploma or equivalent required., • Minimum of 2 years of experience working with heavy equipment, fleet maintenance, diesel equipment, or construction machinery., • Knowledge of preventative maintenance programs and lubrication practices., • Basic mechanical troubleshooting and repair skills., • Ability to identify common equipment maintenance issues and safety concerns., • Valid driver's license with a clean driving record., • CDL preferred or willingness to obtain. Preferred Skills • Experience servicing construction, landscape, or heavy civil equipment., • Knowledge of diesel engines, hydraulic systems, and heavy equipment operations., • Familiarity with DOT inspections and fleet maintenance procedures., • Experience operating service trucks and mobile fueling equipment., • Welding and fabrication experience is a plus., • OSHA 10 or OSHA 30 certification preferred., • Bilingual (Spanish/English) is a plus., • Strong organizational and communication skills. Physical Requirements • Frequently lift, carry, and move materials weighing up to 50 pounds., • Climb on and around heavy equipment and trucks., • Work outdoors in varying weather and job site conditions., • Bend, kneel, crouch, and stand for extended periods., • Safely operate service vehicles and fueling equipment.Company Description Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come. Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come.

Job DescriptionDescription: Job Title: Fleet Auto Mechanic (On-site) Reports to: Director of Maintenance & Logistics Manager Location: LIC, NY & Bronx, NY Position Summary: Kommissary is a social enterprise on a mission to spread joy through food. We produce and deliver high volumes of meals spanning a diverse array of cuisines to every demographic in New York City. Kommissary is seeking an experienced On-Site Fleet Auto Mechanic to oversee the maintenance and operational readiness of our fleet of approximately 40 vehicles, including vans, cars, and light- to medium-duty trucks. This role is responsible for preventive maintenance, diagnostics, repairs, inspections, and fleet compliance, ensuring all vehicles remain safe, reliable, and ready for daily operations. This is an excellent opportunity to join a successful, growth-oriented company. At Kommissary, you'll become part of a team dedicated to delivering unparalleled hospitality. Responsibilities & Duties: • Perform preventive maintenance including oil changes, brake service, tire rotations, fluid replacements, and scheduled inspections., • Diagnose and repair issues involving engines, transmissions, drivetrains, suspensions, steering systems, and brakes., • Repair or replace components such as belts, hoses, wheel bearings, air brakes, and other mechanical systems., • Perform tire service, wheel alignments, suspension inspections, and fluid system maintenance., • Maintain the operational readiness of 40 fleet vehicles used for daily delivery operations., • Conduct routine inspections and safety checks across the fleet., • Oversee vehicle registrations, insurance documentation, and compliance requirements., • Assist with coordinating vehicle distribution and readiness for drivers and delivery routes., • Manage parts inventory and maintenance supplies for fleet repairs., • Track repair costs and maintenance spending to help control fleet operating expenses., • Order parts and coordinate with vendors when specialized repairs or components are required., • Use hand tools, power tools, and diagnostic equipment to repair and maintain vehicles., • Ability to lift up to 50 pounds., • Ability to sit, stand, kneel, bend, and work under vehicles for extended periods., • Must be flexible and can work in both the LIC and Bronx locations as needed. Qualifications: • Proven mechanic experience with a strong background in automotive diagnostics and repairs across multiple vehicle systems., • 3+ years experience as an auto mechanic or fleet technician, preferably with commercial fleet vehicles., • Knowledge of diesel engine repair and automotive electrical systems is a plus., • Skilled in the use of hand tools, power tools, welding equipment, and other automotive maintenance tools., • Strong mechanical knowledge with the ability to troubleshoot complex issues efficiently., • Experience working on transmissions, wheel alignments, suspension systems, tire service, shocks, and struts repairs., • Ability to work safely while following all safety protocols related to air brake systems and other hazardous components., • Ability to manage maintenance schedules, repair tracking, and parts inventory., • Valid driver’s license required., • Work 40 hours/week, and overtime as required. Physical Requirements: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Lift up to 50lbs., • Work standing or walking for long periods of time., • Work bending and squatting., • Fast paced movement., • Work in all weather conditions. Compensation & Benefits: Pay range is $73,000-$80,000 annually, depending on skill level, experience and/or education. Compensation offered is also subject to local wage and hour laws. PTO, Health, Dental and Vision Insurance, 401k, Pre-tax commuter benefits and more! Other Duties: This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. E-Verify Notice: This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Equal Employment Opportunity: Kommissary does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. Kommissary is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact us at HR@kommissary.com. Requirements:

Job DescriptionDiesel Truck and Trailer Mechanics are needed in Rahway New Jersey to join a national fleet. This opening provides an opportunity for growth, training, and advancement. Compensation: • $27.00 - $38.00/hour, • Weekly Pay, • PTO, Holidays, • 401K Matching Program, • Comprehensive Benefits (Medical, Dental, Vision), • Tool and Boot Allowance Shift/Schedule: • Monday - Friday; 2nd shift, • 2:00pm - 10:00pm Preferred Requirements: • Truck OR Trailer repair experience, Own Tools, Valid Drivers License, • Hazmat, R-Stamp, State Inspection Licenses, • Ability to follow manufacturer guidelines, and technical manuals, • Knowledge of emissions, A/C, diagnostics, diesel engines, air, electrical, mechanical, and hydraulic systems, • Welding experience; Stick or MIG or TIG

Job DescriptionJob Summary Under the direction of the Superintendent or General Foreman, the Mechanic is responsible for repairing and maintaining buses and other fleet vehicles to ensure safe and reliable operation. Key Responsibilities: • Perform testing, repair, installation, and maintenance on diesel engines, transmissions, HVAC, electrical systems, brake systems, suspension, steering, and electronic components., • Remove, inspect, repair, and replace defective parts and vehicle components., • Rebuild diesel engines and replace engines and transmissions as required., • Diagnose mechanical and electrical issues using appropriate diagnostic tools., • Perform repairs using hand tools, power tools, welding equipment, and measuring instruments., • Adjust diesel engine components such as valves, timing, and injectors., • Inspect and maintain brake systems, bearings, axles, wheel bearings, and air brake components., • Perform preventive maintenance including oil changes, filter replacements, tire replacements, and light repairs., • Determine equipment serviceability and ensure vehicles meet operational standards., • Follow safety procedures and maintain compliance with workplace regulations. Qualifications: • High School Diploma or GED., • Minimum 3 years of mechanical experience, preferably with diesel engines., • ASE certification is a plus., • Valid driver's license with the ability to obtain the required commercial license and endorsements., • Ability to pass background screening and physical examination., • Good driving record., • Ability to work first or second shift with overtime as needed.

Job Description *Inquire about other positions available* Trailer Mechanics and Liftgate Technician needed in North Haledon, NJ. Preferred experience: body work, brakes, ABS diagnostics, wiring, liftgates, welding, and fabricating Pay based on experience and overtime available, but not required Responsibilities: • Repair trailers, • Perform routine vehicle maintenance, • Perform quality inspections prior to returning the vehicle to the customer Qualifications: • Having experience in welding, construction, fabrication or mechanics is a plus but not required., • Knowledge of shop equipment a plus, • Strong mechanical aptitude and troubleshooting skills a plus, • previous work in a shop environment is a plus Additional Information: • Day shift positions available for shop work and road service, • Overtime Available, • Apprentice to journeyman level positions available including transport refrigeration service and repair, • Looking for someone with mechanical, welding, and/or fabrication skills, • Willing to train, • Pay rate based on experience, • Medical Insurance, 401 K and paid time off available\nCompany Description North Jersey Trailer and Truck Service Inc. is a full-service trailer dealer serving the entire New Jersey and New York metropolitan area, including Long Island, we offer onsite repairs and maintenance as well as transport refrigeration service at your facility and at our two fully equipped shops. North Jersey Trailer and Truck Service Inc. is a full-service trailer dealer serving the entire New Jersey and New York metropolitan area, including Long Island, we offer onsite repairs and maintenance as well as transport refrigeration service at your facility and at our two fully equipped shops.

Job DescriptionUnion Shop Urgently Hiring a Welding Fabricator to Start ASAP Direct Hire, with Excellent Union Benefits. Please apply and can be scheduled to interview and start within a Week! Pay: $25-$27/hour ; Overtime: $37.50-$40.50/hour Shift: 6am-2:30pm (Monday-Friday) Location: Totowa, NJ Job Description The Welding Fabricator is responsible for fitting, assembling, and welding structural and miscellaneous steel components used in infrastructure, rail, transit, construction, utilities, and industrial applications. This role interprets fabrication drawings and blueprints, performs MIG, TIG, and Stick welding, and works with carbon steel, stainless steel, and aluminum to produce high-quality fabricated products. The Welding Fabricator collaborates closely with fitters and shop personnel to ensure precise alignment, strong welds, and adherence to safety, quality, and production standards. • Perform MIG, TIG, and Stick welding on carbon steel, stainless steel, and aluminum components in accordance with project specifications., • Assemble, fit, and weld structural steel and heavy fabrication pieces for infrastructure, rail, transit, construction, and industrial projects., • Use fabrication tools such as grinders, torches, plasma cutters, and press brakes to cut, shape, and prepare metal components., • Interpret schematics and weld symbols to ensure correct weld types, sizes, and locations on all assemblies., • Apply welding inspection and quality control practices to verify weld integrity, dimensional accuracy, and compliance with standards., • Collaborate with fitters, welders, and shop personnel on the production floor to coordinate work, resolve issues, and meet project deadlines., • Maintain a safe work area by following safety procedures, using required personal protective equipment, and operating machinery responsibly., • Support a fast-paced production environment by managing multiple tasks, meeting schedule requirements, and maintaining consistent quality output. Essential Skills • Proficiency in MIG, TIG and Stick welding., • Experience with structural steel and heavy fabrication., • Ability to perform fit-up, layout, and assembly of metal components., • Hands-on experience with fabrication tools such as grinders, torches, plasma cutters, and press brakes., • Knowledge of metals including carbon steel, stainless steel, and aluminum., • Skill in using hand tools for fabrication, assembly, and fitting tasks., • Ability to read and interpret fabrication drawings and blueprints without supervision.Job Type & Location This is a Permanent position based out of West Caldwell, NJ. Pay and Benefits The pay range for this position is $52000.00 - $58240.00/yr. This is a Unionized shop in New Jersey offering great benefits and incentives. Medical, dental, and vision insurance coverage Paid time off (PTO) and scheduled plant shutdowns/holidays Stable, long-term employment with an established manufacturing company (100+ years in business) Consistent work on essential infrastructure and industrial projects Opportunity for skill development in structural welding and fabrication Workplace Type This is a fully onsite position in West Caldwell,NJ. Application Deadline This position is anticipated to close on Aug 21, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. \nCompany Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description DIESEL MECHANIC / A&B TECHS (VALLEY STREAM) SIGN ON BONUS Established auto/truck repair shop hiring experienced DIESEL TECHNICIANS and A & B techs. Knowledge of on-board computers, electrical skills and troubleshooting a plus. Full range of repairs from brakes, front end, suspension, NYS inspections, a/c and welding. This is a full time position, Monday through Friday. Salary is dependent upon your experience.

Job DescriptionQuality Repair Solutions (QRS®) is a comprehensive tractor and trailer repair and maintenance business that specializes in pressurized tankers. QRS ensures professional drivers get back on the road safely and quickly.We are looking for an energetic, reliable Trailer Mechanic to join our team in Rahway, NJ. We are a dynamic, stable and growing company. We have great long term career opportunities across our headquarters, trucking terminals, mechanic shops, depots, tank washes and other locations. If you want to join the industry leader and make a difference, please consider this opportunity and apply at QRSShops.com.Compensation and Incentives • Weekly Competitive Pay is $28 - $31/per hour, • Tool/Boot Reimbursement Program, • Referral Program, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Generous Paid Time Off/ Holiday Schedule, • Employer Matching 401KJob DetailsJob Summary:Responsible for diagnosing, repair, and perform preventative maintenance on semi-truck trailers and tractors, including tasks like brake adjustments, tire replacements, electrical troubleshooting, basic structural repairs, and more, all while working out of a service truck and adhering to strict safety regulations; general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and company standards. Uses technical publications or automated systems in maintaining vehicles to prescribed manufacturers’ maintenance schedules and for researching parts. Properly annotates all maintenance and labor performed in maintenance management software.Duties and Responsibilities:, • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day inspections (trailers) on equipment as required., • Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Able to identify parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Perform miscellaneous duties as assigned.Benefits, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Basic Life/Voluntary Life, • Short Term and Long Term Disability, • Flexible Spending Account and Health Savings Account, • Employee Assistance Program, • 401k Match & Roth Retirement Savings Plan, • Weekly PayRequirementsSkills and Abilities:, • Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems., • Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures.Education and Experience:, • High school diploma or equivalent, or equivalent vocational school required., • At least 1 year related experience required. Additional Job InformationPosition Type/Expected Hours of Work:, • This is a full-time position, and days and hours of work are Monday through Friday, hours depend on location.Company InformationWork Environment:, • The shop has a climate similar to outdoor weather. Frequent exposure to loud machinery, air tool operation, hammering and engine noise.Physical Demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Ability to push, pull, or lift up to 75 lbs., • Able to fit into a 20” cargo trailer dome opening., • Able to meet safety standards for fall protection harness – max weight 310 lbs. (includes all PPE worn), • Use their hands to handle, control, or feel objects, tools, or controls., • Stand for long periods of time., • Walk for long periods of time., • Bend or twist their body., • See differences between colors, shades, and brightness.Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment OpportunitiesQuality Carriers, Inc. Provides equal employment opportunities to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job Description We are a leading transportation and waste management company specializing in dump truck services, aggregate hauling, solid and hazardous waste transport, remediation, and abatement. Our fleet is the backbone of our operation — and we’re looking for an experienced Heavy-Duty Diesel Mechanic to keep it running strong. Position Summary The Heavy-Duty Diesel Mechanic will be responsible for diagnosing, repairing, and maintaining a fleet of dump trucks, roll-offs, and other heavy-duty equipment. The ideal candidate is a skilled technician who takes pride in precision, efficiency, and reliability. Key Responsibilities Perform preventative maintenance and major repairs on diesel engines, transmissions, hydraulics, brakes, and electrical systems. Diagnose mechanical issues using diagnostic tools and manuals. Conduct inspections and ensure vehicles meet DOT safety and compliance standards. Maintain accurate service and repair records. Work with operations to minimize downtime and prioritize repairs. Perform welding or fabrication work as needed. Keep the shop and work areas clean, organized, and safe. Qualifications Minimum 3 years of experience as a diesel mechanic (heavy-duty truck experience required). Strong knowledge of engines (Cummins, Detroit, Caterpillar, etc.) and hydraulic systems. Proficiency with diagnostic tools and software. CDL or ability to obtain one preferred. Welding and fabrication skills a plus. Ability to lift up to 75 lbs and work in various weather conditions.

Job Description Job Duties and Responsibilities: • Repairing and maintaining all equipment, both rented and owned., • Inputting equipment repairs via work orders and related web-based software tools., • Being a leader in terms of safety, work ethic and the ability to communicate effectively with field employees including supervision levels., • Working closely with other mechanics to improve internal processes and sharing of information., • Servicing of equipment on various job sites., • Troubleshooting equipment problems independently on out of town job sites., • Following and upholding all required safety rules and regulations., • Recognizing and correcting safety hazards. Knowledge, Skills and Abilities: • High level of understanding of diesel, hydraulics and electrical related applications., • Ability to work with diagrams, schematics and all related diagnostic work., • Working knowledge of heavy equipment including, but not limited to cranes, excavators, concrete pumps, foundation drilling rigs (Bauer, Liebherr, etc.), • Mechanically inclined with great problem solving skills., • Ability to work well in a fast paced and stressful environment. Education and Experience Requirements: 5+ years of related experience required. Welding experience is a plus Physical Requirements: • Prolonged periods standing and walking., • Able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Must be able to visually inspect machines., • Must be able to lift and carry up to 75 pounds. Extensive overnight travel required for this position!

Job Description Job description Guardian Bus Company is looking for a skilled Mechanic's A & B, DOT Mechanics, Welders, Body Man and Body Man helpers to assemble, maintain and repair machinery and vehicles. You will be responsible for ensuring functionality and reliability of machines, engines and mechanical systems. An excellent mechanic must have manual dexterity and great attention to detail. They must be able to work with various machines and tools as well as follow all safety precautions. *Plenty Of Room For Advancement* Responsibilities • Build and assemble machines or mechanical components according to requirements, • Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues, • Conduct repairs aiming for maximum reliability, • Troubleshoot reported problems and resolve them in a timely manner, • Perform thorough maintenance on machinery, equipment and systems, • Clean and apply lubricants to machinery components, • Replenish fluids and components of engines and machinery, • Provide consultation on correct maintenance and preventative measures to machine or vehicle users, • Undertake other duties as assigned (e.g. repair of hydraulic systems, painting vehicles etc.), • Keep logs of work and report on issues, • All vehicle components including Engine, DriveTrain, Electrical, Suspension, Steering, Exhaust, Air Conditioning ETC., • Perform calls and emergency repairs as needed., • May be subject to a background check and Drug screening Skills • Proven experience as Mechanic, • Excellent knowledge of machinery and hydraulic, electrical and other systems and their components, • Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers), • Ability to follow established procedures and practices and read instruction, blueprints etc., • A strong commitment to all health and safety guidelines, • Very good communication skills, • A problem-solving ability, • Very good physical strength and stamina EXPERIENCE: • Mechanical: (2-3 years (Preferred) Skills: • Diesel engines, • Alignment, • Mechanic experience, • Auto body repair, • Driving, • Brakes, • Welding, • , or cleaning procedures in place This Job Is: • A job for which military experienced candidates are encouraged to apply, • A “Fair Chance” job (you or the employer follow Fair Chance hiring practices when performing background checks), • A good fit for applicants with gaps in their resume, or who have been out of the workforce for the past 6 months or more Work Remotely • No Job Type: Full-time Salary: $16.50 - $29.00 per hour Benefits: • Dental insurance, • Health insurance, • Vision insurance Schedule: • Monday to Friday, • Overtime, • Weekend availability Work Location: In person

Job DescriptionDescription: JESCO, a leading John Deere, Wirtgen Group, Ditch Witch and Topcon dealer in New York, New Jersey, Maryland, Delaware, Virginia, and New England region. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company of over 350 employees. Why JESCO: Two things that haven’t changed are our commitment to the customers and communities we serve. Let us show you what makes us the “Down to Earth Equipment People”. We offer comprehensive benefits packages, career development paths, state of the art tools and equipment as well as a great working environment. Start your career as a valued member of the JESCO team. Responsibilities • All Service assignments are to be performed in a safe, efficient and capable manner, using the least number of labor hours necessary, while maintaining the highest quality of standards possible, • Individuals must comply with all safety policies, and have the ability to lift and move up to 70 lbs., • Review service orders and inspect equipment accordingly for additional repairs or malfunctions by test driving or troubleshooting vehicle operation., • Notify management if shop equipment is not in serviceable condition or constitutes a safety hazard, • Service orders should be completed accurately and concisely, use of computer when applicable, • Warranty reports are to be handled in the same manner, and you must retain, tag and store removed parts properly for return to manufacturer, • Apply technical knowledge to diagnose cause of equipment malfunctions., • Obtain final approval prior to performing additional repairs., • Respond to repair inquiries in a prompt manner., • Perform repairs and maintenance service work requested in accordance with approved quality and efficiency standards. Discard residual or hazardous waste, using the proper disposal methods, • Invest in tools necessary to perform at expected levels and quality, • Always conduct yourself in a professional manner at all times when representing the company, • Apply knowledge and ability to safely utilize all tools and equipment to include: “Creeper” Pressure washers Torque wrenches Hydraulic pressure Computer pressure gauges Welding equipment Pneumatic and hand tools Hydraulic jacks Diagnostic equipment • Maintain, understand, and be committed to a shared responsibility for the upgrade of technical competence by attending all classes, shop meetings and reading all service bulletins as requested, • Test drive to assure proper operation and complete equipment inspections in accordance with company and governed standards, • Respect and maintain company investment in tools and work area. Keep company assets in a clean and orderly manner and use with proper care to meet safety requirements determined by dealership and government agenciesRequirements:, • Deere Level 1, Deere Level 2, Deere Capstone Certification, • Associates Degree and/or technical certification from accredited trade school, • Must have valid drivers license – must meet underwriting requirements, • Written Communication, • Technical Communication, • Customer Relations, • Customer Service, • Math Aptitude, • Time Management, • Manual Dexterity Skills, • Ability to stand for long periods of time We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Chassis Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for a Chassis Mechanic for our Linden, NJ location! Address: 4700 Tremley Point Road, Linden, NJ. 07036 Shift: Monday through Friday, 7:00 AM to 3:30 PM Pay Range: $22.00 to $27.50 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards, complete DOT inspections, • Welding and fabrication experience - TIG/MIG, aluminum and stainless preferred Physical Demands: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder DCI Benefits: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces

Job DescriptionMay Ship Repair is seeking a Plasma Cutting Table Operator to join our team at our shipyard facility. The ideal candidate will have experience operating CNC plasma cutting equipment and reading technical drawings in a fast-paced industrial environment. Key Responsibilities: • Operate CNC plasma cutting table to cut steel plates according to work orders and drawings, • Load and unload materials on the cutting table using overhead cranes or forklifts, • Interpret technical drawings, nesting layouts, and cutting programs, • Perform daily equipment checks and preventative maintenance, • Ensure parts are labeled, organized, and ready for welding or fitting, • Maintain accurate records of material usage and part traceability, • Follow all safety protocols and report any equipment or safety issueQualifications:, • 2+ years of experience operating CNC plasma or oxy-fuel cutting tables, • Ability to read and interpret blueprints and CAD-generated cut files, • Familiarity with steel plate types, grades, and thicknesses used in marine work, • Basic computer skills to load and adjust programs on the controller, • Experience using measuring tools (tape measure, calipers, etc.), • Ability to safely operate forklifts and overhead cranes (preferred), • Strong attention to detail and commitment to quality workPhysical Requirements:, • Ability to stand, bend, and lift heavy materials (50+ lbs), • Comfortable working in an open-air or industrial environment, often near heavy equipment, • Capable of wearing appropriate PPE (Personal Protective Equipment)Work Schedule:, • Monday to Friday, 7:30 AM 4:00 PMEOE

Job DescriptionPosition Description: The Maintenance Mechanic performs works involving skills sets of two or more maintenance occupations to keep machines, mechanical equipment or the structure of an establishment in repair. Duties may involve boiler tending, welding, machining, carpentry, repairing electrical o mechanical equipment, installing new machinery and repairing electrical or mechanical equipment, installing new machinery and repairing buildings floor, stairs and walls. Position Responsibilities: Maintain equipment for food manufacturing production.Adjust functional parts and devices using hands tools.Address boiler issues as required.Inspected electrical motors and devices; repair, remove and replace. Fabricate and repair wooden structure.Estimate repair cost. Record work activities.Good manufacturing practices. Comply with all safety requirements. Additional Information: All your information will be kept confidential according to EEO guidelines. $25,001 - $35,000

Job Description Job Description: Master Plumber (New York State Licensed) – Gas Work Experience Required Position Title Master Plumber – New York State Licensed Location: Bronx, NY 10454 Position Summary We are seeking a highly skilled and experienced New York State Licensed Master Plumber with extensive experience in natural gas and fuel gas systems. The ideal candidate will be responsible for the installation, maintenance, repair, inspection, and troubleshooting of residential, commercial, and industrial plumbing and gas systems while ensuring compliance with all New York State and local codes, safety regulations, and industry standards. Key Responsibilities • Install, service, repair, and maintain plumbing systems, fixtures, piping, and equipment., • Perform gas piping installations for natural gas and propane systems., • Conduct leak detection, pressure testing, and troubleshooting of gas distribution systems., • Install and service gas-fired equipment, including boilers, water heaters, furnaces, and commercial appliances., • Interpret blueprints, drawings, specifications, and plumbing schematics., • Obtain permits and coordinate inspections with local authorities as required., • Ensure all work complies with New York State Plumbing Code, Fuel Gas Code, and local municipal regulations., • Diagnose plumbing and gas system issues and develop effective repair solutions., • Estimate labor, materials, and project timelines., • Supervise journeyman plumbers, apprentices, and subcontractors., • Maintain accurate service records, inspection reports, and project documentation., • Respond to emergency plumbing and gas service calls when necessary., • Promote and enforce workplace safety standards and OSHA regulations. Required Qualifications • Current New York State Master Plumber License., • Minimum 5–10 years of plumbing experience, including substantial gas piping and gas equipment installation experience., • Strong knowledge of:, • Ability to read and interpret construction drawings and specifications., • Experience with pressure testing, gas leak detection, and system commissioning., • Valid driver's license and reliable transportation., • Ability to lift up to 50 pounds and work in confined spaces, rooftops, basements, and construction environments. Preferred Qualifications • Experience working on commercial and industrial projects., • OSHA 30 Certification., • NYC Department of Buildings filing and permitting experience., • Backflow Prevention Certification., • Welding, brazing, and pipefitting experience., • Experience supervising field personnel and managing projects. Skills and Competencies • Strong troubleshooting and diagnostic abilities, • Excellent communication and customer service skills, • Leadership and team management, • Attention to detail and safety compliance, • Project planning and organization, • Ability to work independently and manage multiple projects simultaneously Compensation and Benefits • Competitive salary based on experience, • Overtime opportunities, • Insurance Provided, • Paid time off and holidays, • Profit sharing plan, • Continuing education and licensing support Work Environment This position requires work in residential, commercial, industrial, and construction settings. The role involves physical labor, exposure to varying weather conditions, and occasional emergency response outside normal business hours.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $29.00/Hr.

Job Description Job Title: Assembly Technician Location: Fairfield, NJ 07004 Pay: $20 - $25 Shift: Monday to Friday , 6:30am – 3pm Open to entry level or junior candidates! Responsibilities • Assemble and tool new and used packaging equipment., • Accurately use measuring devices such as tape measures, sound and temperature sensors., • Apply shop math skills in daily tasks., • Document machine assembly details, as-built specifications, and update assembly Bills of Material., • Troubleshoot and center-line machines using diagnostic skills acquired from experience., • Proficiently use hand drills and basic machine shop tools including lathes, milling machines, hand grinders, and more., • Repair and troubleshoot pneumatic components., • Read and interpret simple schematic and wiring diagrams., • Perform basic tig welding as needed., • Set up and change over packaging machines. Job Type & Location This is a Contract to Hire position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Aug 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionBenefits: • Employee discounts, • Health insurance, • Paid time off About the Role: PLUMBING & HEATING CORP is looking for a skilled Plumbing Mechanic to join our growing team in New York, NY! This is a fantastic opportunity to bring your hands-on expertise to a company that values quality craftsmanship and takes pride in keeping New York's homes and businesses running smoothly. Responsibilities: • Install, repair, and maintain residential and commercial plumbing systems, • Diagnose and troubleshoot plumbing issues including pipes, fixtures, and drains, • Read and interpret blueprints, schematics, and technical drawings, • Perform pipe fitting, soldering, and welding as needed, • Inspect and test plumbing systems to ensure compliance with codes and safety standards, • Collaborate with foremen and crew members on job sites to ensure timely project completion, • Maintain tools, equipment, and job site cleanlinessRequirements:, • Proven experience 6+ years as a Plumbing Mechanic, • Valid NYS driver's license, • Strong knowledge of local plumbing codes and regulations, • Experience with both residential and commercial plumbing systems, • Ability to read blueprints and technical diagrams, • Reliable, punctual, and a strong team player, • Ability to lift heavy materials and work in physically demanding conditionsAbout Us: PLUMBING & HEATING CORP has been a trusted name in the New York plumbing and heating industry, delivering top-tier service to residential and commercial clients across the city. Our customers rely on us for our expertise, reliability, and commitment to getting the job done right the first time. We take care of our team with competitive pay, steady work, and a supportive environment where skilled tradespeople can truly thrive.

Job DescriptionLead the flow. Power the flame. Location: Bronx, NY 10454 Picture your morning: coffee in hand, you review today’s permits and drawings for a mixed-use retrofit. By 8:00 a.m., you’re onsite guiding a crew through safe gas piping installation, coordinating a pressure test, and confirming compliance with New York State Plumbing and Fuel Gas Codes. Midday, you meet the inspector, close out yesterday’s inspection report, and advise a general contractor on boiler venting. By afternoon, you’re estimating labor and materials for a commercial kitchen build-out, then fielding an urgent call to troubleshoot a residential gas leak—resolving it with precision and care. That’s a day in the life of our New York State Licensed Master Plumber. What you’ll take ownership of • Full-scope installation, service, repair, and maintenance of plumbing systems, fixtures, piping, and equipment across residential, commercial, and industrial sites., • End-to-end gas piping for natural gas and propane systems, including leak detection, pressure testing, commissioning, and documentation., • Installation and servicing of gas-fired equipment: boilers, water heaters, furnaces, and commercial appliances., • Blueprint/schematic interpretation; accurate takeoffs; estimating labor, materials, and project timelines., • Permitting, filings, and coordination of inspections with local authorities; strict adherence to New York State Plumbing Code, Fuel Gas Code, and municipal regulations., • Diagnosis of complex plumbing and gas system issues; development of safe, effective repair strategies., • Field leadership: supervise journeyman plumbers, apprentices, and subcontractors; uphold OSHA and company safety standards., • Meticulous recordkeeping, including service logs, inspection reports, and project documentation., • Occasional after-hours emergency response as needed. What you bring Required, • Current New York State Master Plumber License., • 5–10 years of progressively responsible plumbing experience with substantial fuel gas piping and gas equipment installation., • Strong knowledge of New York State Plumbing Code and Fuel Gas Code, plumbing systems/components, and gas-fired equipment., • Proficiency reading and interpreting construction drawings and specifications., • Hands-on experience with pressure testing, gas leak detection, and system commissioning., • Valid driver’s license and reliable transportation., • Ability to lift up to 50 lbs and work in confined spaces, rooftops, basements, and active construction environments. Preferred, • Background on commercial and industrial projects., • OSHA 30 certification., • NYC Department of Buildings filing and permitting experience., • Backflow Prevention Certification., • Welding, brazing, and pipefitting proficiency., • Track record leading field teams and managing projects. Skills that set you apart, • Expert troubleshooting and diagnostics, • Clear, professional communication and customer service, • Hands-on leadership and team development, • Safety-first mindset with unwavering attention to detail, • Project planning, organization, and multitasking under deadlines Compensation and benefits, • Competitive salary commensurate with experience, • Overtime opportunities, • Insurance provided, • Paid time off and holidays, • Profit sharing plan, • Continuing education and licensing support Work environment You’ll operate in residential, commercial, industrial, and construction settings. Expect physical work, exposure to variable weather, and occasional emergency response outside normal business hours—always with the right tools, training, and team beside you.

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement OpportunitiesJob Summary We are looking for a skilled and experienced Plumber to join our team! In this role, you will perform diagnostics, service, and installation of plumbing in commercial and light residential environments You are a Plumber with a commitment to quality in all the work you do. A team player who is comfortable working independently and with others, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses, • Work 8 hour shifts 8am-4:30pm, • On call on weekends once a monthQualifications, • Valid Drivers License, • Minimum 5 year of professional experience, • Strong knowledge of hydraulic systems, • Ability to handle plumbing tools and equipment

Job Description Seeking an experienced plumber Westwood, NJ • $25 - $50 an hour Overview We are seeking a skilled and dedicated Plumber to join our team. The ideal candidate will have a strong background in plumbing systems, with the ability to handle various tasks related to installation, maintenance, and repair. This role requires a hands-on approach and the capability to work effectively in diverse environments, including residential and commercial settings. Duties • Install, repair, and maintain plumbing systems and fixtures, including but not limited to sinks, toilets, water heaters, boilers, sewers, and water conditioning and filtration systems., • Perform routine inspections of plumbing systems to identify potential issues or necessary repairs., • Assemble and install pipes, fittings, and fixtures using hand tools and power tools., • Collaborate with other construction professionals on-site to ensure projects are completed efficiently., • Conduct heavy lifting as required for the installation of plumbing systems., • Maintain a clean and organized work area while adhering to safety protocols., • Provide clear and effective communication with customers regarding job details and pricing. Experience & Skills • 5+ years of proven experience as a plumber is preferred., • Proven ability to generate revenue on a consistent basis., • Detailed understanding of pricing and standards for services provided in this field., • Familiarity with construction site practices and safety regulations., • Experience in carpentry, masonry, welding, electrical, HVAC, or related fields is a plus but not mandatory. Position Details • Job Type: Full-time, • Expected Hours: 40 – 60 per week, • Work Location: In person Benefits • 401(k), • Company truck, • Health insurance, • Paid time off, • Tools provided Schedule • 10 hour shift, • 8 hour shift, • On call, • Weekends as needed Supplemental Pay • Bonus opportunities, • Commission pay, • Overtime pay, • Performance bonus Requirements • Driver's License: Required, • Ability to Commute to Westwood, NJ 07675: RequiredCompany DescriptionAt Dr. Drip Plumbing & Heating, we’re more than just a service company — we’re a team that values skill, integrity, and growth. We invest in developing our team members and providing clear paths for career advancement. Our work environment is built on respect, support, and teamwork — we treat each other like family. In return for your hard work and dedication, we offer competitive pay, benefits, and performance-based incentives that recognize your expertise and commitment.At Dr. Drip Plumbing & Heating, we’re more than just a service company — we’re a team that values skill, integrity, and growth. We invest in developing our team members and providing clear paths for career advancement. Our work environment is built on respect, support, and teamwork — we treat each other like family. In return for your hard work and dedication, we offer competitive pay, benefits, and performance-based incentives that recognize your expertise and commitment.

Job Description Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $40.11 - $51.32 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. You should be proficient in: • Refrigeration Systems, • Refrigerants, • Ammonia Refrigeration Systems, • Freon Refrigeration Systems Machines & technologies you'll use: • Refrigeration/Cooling Systems

Job DescriptionBenefits: • Health insurance, • Paid time off, • 401(k) matching, • Company car Commercial Gas/Oil Burner Service Technician Company Vehicle | Excellent Benefits | Family-Owned Company Join a respected, family-owned commercial boiler services company with more than 80 years of industry leadership. Known for exceptional customer service and technical expertise, this growing company provides boiler repair, burner service, inspections, water treatment, welding, fabrication, and preventative maintenance for commercial and industrial customers. If you're an experienced Commercial Gas/Oil Burner Service Technician looking for a stable company that values its employees, we'd love to hear from you. Benefits: • Company service vehicle (Take Home & Dispatched from Home), • Health Insurance, • 401(k), • Pension Plan, • Paid Vacation, Holidays & Sick Time, • Company-provided tools, • Paid technical training & certification support, • Long-term career growth with an established industry leader What You'll Do, • Diagnose, service, and repair commercial and industrial gas/oil burners and boiler systems, • Perform preventative maintenance and inspections, • Conduct combustion analysis and optimize burner performance, • Troubleshoot electrical, mechanical, and control system issues, • Replace and calibrate pumps, motors, nozzles, ignition systems, controls, and related components, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Complete service documentation and maintenance reports, • Assist with startup and commissioning of new burner systems, • Participate in an on-call emergency service rotation, • Ensure all work meets OSHA and applicable code requirements What We're Looking For, • 3+ years of commercial gas/oil burner service experience, • Strong knowledge of commercial boiler and burner systems, • Experience troubleshooting electrical controls and combustion systems, • Familiarity with hydronic and steam heating systems, • Knowledge of Building Automation Systems (BAS) is a plus, • Experience with emissions testing and combustion analysis preferred, • Valid Gas/Oil Burner Technician license/certification (where required), • OSHA 30 Certification preferred, • Trade school or apprenticeship training is a plus, • Valid driver's license with a clean driving record Preferred Experience, • Commercial boilers, • Power burners, • Combustion controls, • Flame safeguard controls, • Hydronic systems, • Steam systems, • Industrial heating equipment, • Electrical troubleshooting, • Preventative maintenance Apply today and join a company that has built its reputation on quality workmanship, employee development, and long-term customer relationships. If you're looking for a career—not just another job—we want to hear from you.

Job Description We're Hiring: Burner Service Technician We are proud to partner with a family-owned, industry-leading commercial boiler services company that has been serving clients for over 80 years. Their longevity and success stem from a commitment to customer care and consistently delivering the highest level of boiler service. The company specializes in boiler repair, cleaning, inspection, water treatment, welding, fabrication, and a full range of related services for all types of commercial boilers. Due to continued growth, they are seeking a skilled Commercial Gas/Oil Burner Service Technician to join their team. Immediate Opening – Apply Today! Benefits: • Health Insurance, • 401k, • Pension, • Health insurance, • Company service vehicle (Dispatched From Home!), • Paid vacation, sick leave, and holidays, • Company-provided tools, • Ongoing technical training and certification support Key Responsibilities: • Service and repair high-capacity commercial and industrial Gas/Oil burners, and heating systems., • Conduct combustion analysis and make necessary adjustments to ensure system efficiency and compliance with emissions standards., • Troubleshoot electrical and mechanical faults in burner and boiler systems., • Perform preventative maintenance and inspections on commercial Gas/Oil heating systems., • Replace and calibrate system components such as fuel pumps, nozzles, motors, ignition transformers, and control panels., • Document all work performed and parts used; complete service and maintenance reports., • Ensure all work is compliant with local, state, and federal codes and regulations., • Assist in commissioning newly installed commercial burner systems., • Respond to emergency service calls on a rotating basis. Qualifications: • 3+ years of experience in servicing commercial Gas/Oil burner systems, • Knowledge of Building Automation Systems (BAS) and integration with burner controls., • Familiarity with emissions testing protocols and reporting., • Valid Gas/Oil burner technician license or certification (as required by state/local authorities)., • Strong understanding of combustion theory, burner controls, and boiler operation., • Experience working with large mechanical systems, including hydronic and steam boilers., • Ability to read and interpret schematics, technical manuals, and blueprints., • OSHA 30 certification, • High school diploma or equivalent; completion of a trade school or apprenticeship preferred Ready to take the next step in your Boiler Services career?

Job Description Accurate Specialty Metal Fabricators is seeking an experienced Welder / Metal Fabricator with strong TIG and MIG welding experience to fabricate high-end architectural metal systems for commercial construction projects. Union enrollment and benefits. Responsibilities • Perform TIG and MIG welding on stainless steel, aluminum, and carbon steel., • Read and interpret shop drawings and fabrication blueprints., • Fabricate, fit, and assemble architectural metal components., • Produce high-quality welds that meet company standards., • Operate fabrication equipment and maintain a safe work area., • Work with shop supervisors to meet production schedules. Qualifications • 3-5 years of welding/fabrication experience., • TIG and MIG welding proficiency., • Experience with stainless steel, aluminum, and carbon steel., • Ability to read fabrication drawings., • Strong attention to detail and quality workmanship., • Reliable with a strong work ethic., • Ability to work independently and as part of a team. Preferred Qualifications • Architectural or ornamental metal fabrication experience., • AWS certification is a plus Full-Time | Monday-Friday | 6:30 AM-3:00 PM | Local 28 Union Position Company DescriptionAccurate Specialty Metal Fabricators is a leading architectural metal contractor serving the New York metropolitan area. We specialize in the detailing, engineering, fabrication, and installation of high-end decorative metal systems for airports, commercial buildings, transportation hubs, and other complex projects. Our team is committed to quality craftsmanship, accountability, and delivering exceptional results on every project. As our company continues to grow, we are looking for motivated professionals who want to build long-term careers and help shape the future of our organization.Accurate Specialty Metal Fabricators is a leading architectural metal contractor serving the New York metropolitan area. We specialize in the detailing, engineering, fabrication, and installation of high-end decorative metal systems for airports, commercial buildings, transportation hubs, and other complex projects. Our team is committed to quality craftsmanship, accountability, and delivering exceptional results on every project. As our company continues to grow, we are looking for motivated professionals who want to build long-term careers and help shape the future of our organization.

Job Description Cutter/Welder Architectural Grille, a Division of Giumenta Corporation, located at 42 Second Avenue, Brooklyn, NY, 11215 is a family-owned and operated manufacturing company that has been in business since 1945. We are currently seeking a Cutter/Welder to add to our growing team. The schedule for this role is 7:00AM - 3:30PM. This dual-role position requires proficiency in both cutting and welding metal components with precision, ensuring the highest quality craftsmanship in line with our company standards. Duties and Responsibilities Cutting Responsibilities: • Safely operate saws to cut brass, bronze, stainless steel, and other metals., • Layout jobs as per blueprints, shop drawings, and other job orders., • Check mist oil levels and remove shavings before operating saws., • Maximize material usage by checking the availability of cut stock before using full-length materials., • Maintain the inventory of extruded stock and inform the Factory Manager when the stock is running low., • Ensure saw blades are properly maintained and inform the Maintenance Manager when they need to be replaced., • Ensure work areas and tools are clean, organized, and returned after use., • Dispose of scraps in appropriate bins. Welding Responsibilities: • Perform TIG welding on aluminum, brass, bronze, and steel with precision., • Produce neat, spill-free welds on cores and small, clean welds on frames., • Weld according to the job’s desired finish and verify squareness and job specifications upon completion., • Ensure welds are accurate, clean, and meet the highest standards., • Adhere to safety protocols at all times. Qualifications/Requirements: • 2+ years of cutting and welding experience., • Proficiency in TIG welding techniques and using a saw to cut various metals., • Strong attention to detail and precision work., • Problem sensitivity, creative thinking, and effective time management., • Ability to handle and move heavy materials (up to 50 lbs)., • Manual dexterity for handling tools, welding, and cutting equipment., • Neat, organized, and able to work independently and with a team., • Effective communication skills and adaptability to change. Working Conditions: • Physical Stamina for prolonged periods of standing, manual labor, and handling parts., • Near vision is required to see things at close range., • Must be able to lift and carry heavy materials (up to 50 lbs.)., • Work is conducted in a manufacturing environment with adherence to strict safety protocols. Americans with Disabilities Specifications: The physical demands described herein are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Pay Rate: $20 - $23/Hour Introductory Period: 90 Days After Thirty Days: • Health Care Insurance, • Paid Holidays Paid Time Off (PTO): • Beginning 1/1 after completion of six months: 10 days of paid time off, • Beginning 1/1 after completion of two years: 10.25 days of paid time off, • Beginning 1/1 after completion of three years: 10.38 days of paid time off, • Beginning 1/1 after completion of four years: 10.50 days of paid time off, • Beginning 1/1 after completion of five years: 15 days of paid time off, • Beginning 1/1 after completion of six to nine years: 20 days of paid time off, • Beginning 1/1 after completion of 10 years: 25 days of paid time off After One Year: • Ability to contribute to the company’s 401(k) plan, • Safe Harbor Plan Eligibility (3% of your salary), • Profit Sharing Plan Eligibility Other Opportunities: • Year-end performance bonus (if warranted), • Annual increase (if warranted), • Transit Check, • Voluntary Benefits from Extensis (Dental Plan, Vision Plan, Short Term Disability, Beyond Perks, Term Life Insurance, Flexible Spending, Long Term Disability, Credit Union, Group Home/ Auto Insurance, Critical Illness Insurance, Pet Benefit Plan, Section 529 College Savings, Prepaid Legal Services and Aflac)

Job DescriptionWelder Fairfield, NJ Manufacturing Facility Shift: 2nd Shift, Monday–Friday, 2:30 PM–11:00 PM Pay: $17.50–$19.75/hr base + $2.25/hr shift differential ($19.75–$22.00/hr, based on experience) About the Role We're looking for Welders to join our Fabrication department on 2nd shift. You'll weld frames, legs, and other components, working from assembly drawings to produce quality parts and correct anything that falls out of spec. What You'll Do • Set up and operate TIG and MIG welding machines, • Select the correct jig or fixturing for each job, • Weld aluminum and steel parts as needed, • Complete drill and grind work as required, • Inspect finished welds and rework parts that are out of spec, • Read and interpret assembly drawings, BOMs, and related procedures, • Navigate computer-generated production boards, • Keep your workstation clean per 5S and safety protocols, • Support daily work and special projects alongside your team What You'll Need • High school diploma or GED, • Previous welding experience preferred, • Mechanical aptitude and the ability to follow directions, • Comfortable reading assembly drawings and BOMs, • Reliable attendance and flexibility with changing priorities, • Basic comfort navigating production systems on a computer Physical Requirements Standing up to 10 hours/day with frequent bending, reaching, and coordinated hand movements. Lifting up to 50 lbs regularly and up to 100 lbs occasionally. Steel-toed shoes, welding mask, and supplemental PPE (weld gloves, sleeves, jackets/aprons) required. Warehouse environment, no air conditioning Full-time, Weekly Pay, and Benefits • 5 Days of PTO, • 6 Paid Holidays, • Paid Sick Leave, • Up to 50% of health insurance premiums paid, • Access to a retirement plan, financial fitness, and employee savings programs

Job DescriptionDescription: Job description Come join the best heating service company in the NYC area! Controlled Combustion maintains one of the largest and most qualified licensed heating specialist staffs in the industry. Our service personnel, numbering more than 40 people, are members of the Metal Trades Branch-Local 638-A.F.L-C.I.O. That means they are highly qualified, highly competent professionals. In addition, they receive rigorous in-house training as well as ongoing instruction from factory authorized experts and educational institution to keep their technical knowledge current and their maintenance skills sharp. Our shop has earned the prestigious National Board Repair "R" Certificate of Authorization and Symbol Stamp and "U" Certificate of Authorization and Symbol Stamp attesting to our service expertise. Also, our technicians are certified ASME code welders. We maintain a Class "A" installers license in New York City and are licensed throughout the metropolitan area as well. Benefits: • Competitive Salary, • Local Union Health Benefits, • Local Union Retirement Pension, • Room for Growth! Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance Schedule: • Monday to Friday, • Overtime, • Weekends as needed Application Question(s): • What skills do you have that help you perform this job?, • Please list any certifications you have., • Do you have a DOB Full Gas Work Card?, • Are you a member of Local Union 638? Experience: • Installation / Repair of Gas Piping: 1 year (Preferred), • Welding: 1 year (Preferred) License/Certification: • Driver's License (Preferred) Work Location: In person Requirements: Requirements: • Five (5) years experience under a Licensed Master Plumber, • DOB Full Gas Work Card, • Cutting, threading, and fitting black malleable steel piping, • Cutting, soldering, and braising copper piping, • ProPress fittings, • Knowledge of natural gas and fuel oil heating systems, • Knowledge of utility (ConEd and National Grid) procedures is a plus, • Electrical experience is a plus.

Job Description Wrought Iron Fabricator Job Type: Full-time Location: Brooklyn, NY 11207 (in person) Position: Wrought Iron Fabricator Energy Fencing Inc. is New York’s premier fencing company, proudly operating under the motto “With energy, anything is possible.” Our commitment to excellence, reliability, and customer satisfaction drives us to deliver top-quality fencing installations, gates, and custom ironworks. We are seeking an experienced Wrought Iron Fabricator to join our growing team. The ideal candidate will possess strong welding and metal fabrication skills, experience working with ornamental iron and miscellaneous metals, and a commitment to producing exceptional craftsmanship. This role is responsible for fabricating custom gates, fences, railings, window guards, bollards, security barriers, and specialty metalwork for commercial, municipal, industrial, and residential projects. The successful candidate must be able to read and interpret shop drawings, perform accurate layout and fit-up work, operate fabrication equipment safely, and maintain high standards of quality throughout the fabrication process. This position requires a detail-oriented professional who takes pride in producing finished products that meet project specifications, customer expectations, and Energy Fencing's quality standards. Key Responsibilities Metal Fabrication: Fabricate custom wrought iron fences, gates, railings, window guards, security barriers, bollards, decorative ironwork, and other miscellaneous metal products in accordance with approved shop drawings, project specifications, and company standards. • Layout & Fit-Up: Measure, mark, cut, notch, cope, drill, and assemble metal components accurately to ensure proper fit, alignment, and dimensional compliance prior to welding and finishing., • Welding & Assembly: Perform MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding on steel, aluminum, and miscellaneous metal components as required. Produce clean, structurally sound welds that meet quality and appearance standards., • Blueprint & Drawing Interpretation: Read and interpret shop drawings, fabrication details, blueprints, sketches, material schedules, and specifications to accurately fabricate products according to design requirements., • Equipment Operation: Safely operate fabrication equipment including welding machines, ironworkers, band saws, chop saws, drill presses, grinders, hydraulic presses, forklifts, and other shop tools necessary to complete fabrication activities., • Metal Finishing: Grind, sand, polish, straighten, and prepare fabricated assemblies for galvanizing, powder coating, painting, or final installation. Ensure all finished products meet company quality and aesthetic standards., • Quality Control: Inspect fabricated products throughout the manufacturing process to verify dimensions, weld quality, material accuracy, fit-up, functionality, and overall workmanship. Identify and correct deficiencies before products leave the shop., • Material Handling & Inventory: Assist with receiving, organizing, storing, and tracking raw materials, hardware, and fabricated products. Verify material quantities and report shortages, defects, or discrepancies to management., • Installation Support: Coordinate with field installation teams to ensure fabricated products are delivered complete, accurate, and ready for installation. Assist with field modifications and troubleshooting when required., • Equipment Maintenance: Perform routine maintenance and care of welding equipment, fabrication machinery, hand tools, and shop equipment. Report repair needs and maintain equipment in safe working condition., • Shop Organization: Maintain a clean, organized, and efficient work environment. Properly store materials, tools, and finished products while ensuring walkways and work areas remain safe and free of hazards., • Safety Compliance: Follow OSHA regulations, company safety policies, hot work procedures, personal protective equipment (PPE) requirements, and safe material handling practices at all times. Promote a culture of safety and accountability throughout the fabrication shop., • Team Collaboration: Work closely with shop supervisors, project managers, estimators, and installation crews to ensure fabrication schedules, production goals, and project deadlines are achieved. Qualifications • Minimum 3 years of experience in wrought iron fabrication, miscellaneous metals fabrication, welding, or a related metalworking trade (required)., • Proven experience fabricating ornamental iron fences, gates, railings, window guards, security barriers, bollards, stair systems, and custom metal products., • Proficiency in MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding processes., • Ability to read and interpret shop drawings, fabrication details, blueprints, material schedules, and project specifications., • Strong knowledge of metal fabrication techniques including layout, measuring, cutting, drilling, coping, fitting, assembly, grinding, and finishing., • Experience operating fabrication equipment including welding machines, ironworkers, band saws, drill presses, grinders, chop saws, hydraulic equipment, and other shop tools., • Ability to accurately measure, fabricate, and assemble components while maintaining tight tolerances and high quality standards., • Strong understanding of welding symbols, fabrication standards, material types, and fabrication best practices., • Experience working with steel, aluminum, stainless steel, and ornamental iron products preferred., • Experience fabricating custom gates, automated gate systems, railings, fencing systems, and miscellaneous metal fabrications preferred., • Ability to perform quality control inspections and identify fabrication or welding deficiencies before products leave the shop., • Strong attention to detail and commitment to craftsmanship, quality, and productivity., • Ability to work independently and as part of a fabrication team in a fast paced production environment., • Working knowledge of OSHA regulations, welding safety requirements, and proper use of personal protective equipment (PPE)., • Forklift certification or experience operating material handling equipment preferred., • AWS Welding Certification preferred but not required., • Ability to lift and move materials weighing up to 75 pounds and perform physically demanding fabrication work., • English proficiency (required)., • Must be located in NYC or within 25 miles of Brooklyn, NY 11207., • Ability to commute to Brooklyn, NY 11207 (required)., • Authorized to work in the United States. Work Environment • Shop-based fabrication environment., • Occasional field measurements and installation support as needed., • Fast-paced production environment with multiple ongoing projects., • Compensation & Benefits, • Salary: $25–$30 per hour (commensurate with experience), • Compensation Package: Overtime opportunities, performance bonus, yearly bonusBenefits:, • 401(k), • Paid time off (10 PTO days), • Professional development opportunities, • Schedule, • 8-hour shifts, • Day shift, Monday–FridayEnergy Fencing Inc. is an equal opportunity employer. We encourage applicants from all backgrounds to apply.

Job Description We are seeking a part-time Welding Instructor to work alongside the senior instructor, follow the welding curriculum, and support students in the classroom and welding lab. Schedule: Monday-Thursday 4:30pm to 9:30pm Duties and Responsibilities • Assist with student instruction in both the classroom and welding lab, • Guide and support student learning in a safe, structured environment, • Demonstrate welding, cutting, fitting, and fabrication techniques, • Prepare materials and projects for instruction, • Weld, fabricate, cut, and visually inspect welds on a variety of materials and processes, • Work with mild steel, stainless steel, and aluminum, • Facilitate workshop sessions as needed, • Enforce all shop and lab safety procedures, • Perform other duties as assigned Qualifications • Current welding certification or completion of an AWS program, trade school, 900-hour welder/fabricator program, or equivalent training., • and/or 5-7 years of documented industry experience, • Strong knowledge of welding theory, welding code requirements, and certification standards, • Demonstrated commitment to workplace and lab safety, including the ability to follow and enforce safety protocols, • Ability to work effectively with students of diverse backgrounds, skill levels, and learning needs, • Ability to pass a multi-process welding and cutting evaluation, • Minimum of 5 years of experience in fabrication, fitting, ironwork, welding, CNC, pipe, or related metalworking industries, whether civilian or military, • Comfortable demonstrating and instructing SMAW, GMAW, FCAW, GTAW, plasma cutting, and oxy-fuel cutting in multiple positions, • Minimum of 3G certification or equivalent skill level in at least two welding processes Certifications • Destructive test certification, • OSHA certification, • Torch and fire watch certification, • DOT certification Candidate must pass a practical welding test. The completion of a background check will be required for the selected candidate. Compensation: The hourly pay for this position is $28. Benefits: • New Jersey Sick Leave: Earn 1 hour of sick leave for every 30 hours worked with a maximum of 40 hours of leave per benefit year. (Eligible to use after successful completion of probationary period.), • Employee Assistance Program provides free, confidential, limited counseling services, work-life assistance, legal and financial guidance., • Commuter Benefits: Free parking access is provided on site. An optional Transit Pre-Tax Plan is available which allows employees to use pre-tax dollars to purchase eligible transit expenses., • NJ Defined Contribution Retirement Program provides eligible members with a tax-sheltered, defined contribution retirement benefit, along with life insurance and long-term disability coverage. (Must meet eligibility requirements.)

Job Description For over 50 years, APEX Technical School has helped students get the training they need to go after the jobs they want through our unique program of both classroom and hands-on instruction. Your skills and passion can make a difference for the next generation of students. APEX is looking for a highly skilled Welding Instructor to teach hands-on work with a group of students who are eager to learn. ABSOLUTELY no teaching experience required. You supply the skills and we supply everything else, even the tools! MUST be vaccinated against COVID-19. Required to provide documentation during Onboarding process. Responsibilities: · Maintain good safety practice throughout the workday · Conduct and effectively manage daily workload · Interpret and layout projects according to specifications · Manage and organize training resources effectively · Knows the fundamentals of different welding techniques · Evaluate and conduct tests to determine the soundness/quality of welds · Maintain good recordkeeping Qualifications · Basic knowledge of the American Welding Society's welding symbols · Experienced with the different welding tools, equipment, and procedures · Familiarity with engineering blueprints and schematics · Minimum 3 years of experience · High school diploma Benefits · Medical, Dental, Vision · 403B · Extra shifts available · Monday-Friday work week · Paid Vacation and Holidays Shifts · Full-time Morning Shift · Part-time Evening Shift Company DescriptionMission: We are committed to improving the economic and social well-being of the impoverished and disadvantaged. For 85 years, The Fedcap Group has developed scalable, innovative and potentially disruptive solutions to some of society’s most pressing needs. The Fedcap Group is the parent company of a growing number of top-tier nonprofit agencies dedicated to serving over 300,000 children and adults each year across the United States and the United Kingdom. The Fedcap Group provides educational services to every age group, vocational training in high-growth labor industries, behavioral health services, work readiness skill-building and jobs—all targeted to helping people achieve long-term self-sufficiency. The work of The Fedcap Group is structured within four major practice areas: Education, Workforce Development, Occupational Health and Economic Development, which are strategically aligned for maximum impact. The Fedcap Group also invests its time and resources in broader systems change—working in partnership with federal, state and local government to improve the way services are designed, funded, and delivered.Mission: We are committed to improving the economic and social well-being of the impoverished and disadvantaged. \r\n\r\nFor 85 years, The Fedcap Group has developed scalable, innovative and potentially disruptive solutions to some of society’s most pressing needs. The Fedcap Group is the parent company of a growing number of top-tier nonprofit agencies dedicated to serving over 300,000 children and adults each year across the United States and the United Kingdom. The Fedcap Group provides educational services to every age group, vocational training in high-growth labor industries, behavioral health services, work readiness skill-building and jobs—all targeted to helping people achieve long-term self-sufficiency. \r\n\r\nThe work of The Fedcap Group is structured within four major practice areas: Education, Workforce Development, Occupational Health and Economic Development, which are strategically aligned for maximum impact. \r\n\r\nThe Fedcap Group also invests its time and resources in broader systems change—working in partnership with federal, state and local government to improve the way services are designed, funded, and delivered.

Job Description Company overview: Diversified Heat Transfer (DHT) is a leading engineering and manufacturing company of heat exchange equipment and systems for the residential, commercial, and industrial markets. With more than 80 years of experience, DHT designs, builds, and manufactures innovative, technology-driven products that provide flexible, high-quality, and cost-effective solutions for a wide variety of applications. Our continued growth and success means we’re always on the lookout for talented individuals to join our team. At DHT, we are committed to fostering a culturally diverse workforce where every individual is valued and respected. We believe that diversity drives innovation and creativity, and we are proud to be an equal opportunity employer. Position overview: The Welder Combination is responsible for welding pressure vessels and structural steels by assembling pieces of metal together or repairing damage in metal components using heavy machinery that emits high heat, melting the metal into shape, following standard welding procedures and techniques to optimize Flux Cored Arc, Stick, MIG, TIG, and plasma welding processes on steel, stainless steel, aluminum, and nickel materials. Responsibilities: • Weld materials for pressure vessels and structural steel products using the correct materials to join the metals together. Pressure vessel welding must meet all applicable ASME and TEMA specifications and pass X-Ray, die penetrant and visual inspections., • Weld MIG, TIG, and stick pressure vessels and structural steels, • Measure and cut materials to specifications., • Read and understand blue prints according to weld specifications and blue prints prior to starting a project., • Review engineering change orders (ECO’s) and implement desired changes., • Source the materials to be used in the project., • Use quality assurance instruments., • Check finished work to make sure that it falls within the tolerances marked on the blue prints., • Follow all standardized processes, including safety policies and PPE requirements., • Ensure equipment is maintained and quality standards are met with all products., • Adhere to 5Sstandards daily and participate in Kaizen events. Qualifications: • 3 years minimum MIG,TIG, stick welding experience in manufacturing environment or combo of education/training and work experience., • Vocational School or Technical Training required. Welding Certificate preferred., • Ability to pass ASME coupon tests and obtain ASME Certified Combination Welder, • Ability to handle light and average weight parts., • English comprehension is a must., • Good verbal and written communication skills., • Good mechanical aptitude and ability to use hand and power tools., • General understanding of mechanical blueprints and highly sophisticated equipment., • Ability to listen and learn from instructions., • Positive attitude to support company policies and ability to participate in the department's training programs and all 5S initiatives., • Must be flexible and able to adapt to changing responsibilities., • Work overtime as needed when business demands require., • Ability to lift up to 50 lbs.

Job Description We are hiring a Welder/Metal Fabricator for their Metal Fabrication company. The Welder/Metal Fabricator will be involved in all parts of the fabrication process, from raw material to finished product. This is a Temp to Perm opportunity, with company benefits once converted to Direct Hire. The Welder/Fabricator will have the opportunity to fabricate high profile projects throughout New York City! Welder/Metal Fabricator Responsibilities • Cut, assemble, and weld metal components for stairs, railings, and other structural projects using provided blueprints and specifications., • Review drawings and completed work to identify errors, troubleshoot issues, and ensure accuracy and quality standards are met., • Work independently and with team members to complete projects efficiently and within established timelines., • Assist with the handling, movement, and organization of materials throughout the fabrication facility. Welder/Metal Fabricator Requirements • Minimum 3 years of welding and fabrication experience, • Ability to read and interpret blueprints and technical drawings, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently as well as collaboratively within a team environment Welding Test will be administered as part of the interview process Schedule: Monday – Friday Hours: 7am – 3:30pm (Overtime Availability) Pay: $21- $34/hr. depending on experience

Job Description Pipe Welders needed for multiple industrial piping projects in the Riverside, NJ area. You will be working with carbon sch 40 and sch 80 utility piping - tig welding the root with a mig cap, and stainless steel sch 10 food grade process piping welding tig all the way, other duties will include some general mechanical work. You must bring your own hand tools of the trade including hood and appropriate welding attire. You will be required to pass a pre employment drug and background screening upon arrival. Benefits offered are medical, dental, vision, and life insurance, 401K with matching up to 4%, along with paid holidays and vacation. Paying up to $40/hr No per diem Temp to perm with benefits Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Our Facility is located in Franklin Lakes, NJ all candidates from the surrounding area are welcome to apply. This position will be in person in Franklin Lakes. Our company is seeking a skilled Welder to cut and join metals and other materials at our facilities or construction sites. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential. Overtime Available! Welder Duties and Responsibilities • Read blueprints and drawings and take or read measurements to plan layout and procedures, • Determine the appropriate welding equipment or method based on requirements, • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements), • Operate angle grinders to prepare the parts that must be welded, • Align components using calipers, rulers etc. and clamp pieces, • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead), • Repair machinery and other components by welding pieces and filling gaps, • Test and inspect welded surfaces and structure to discover flaws, • Maintain equipment in a condition that does not compromise safety Welder Requirements and Qualifications • Proven experience as welder, • Experience using a variety of welding equipment and procedures (TIG, MMA etc.), • Experience in using electrical or manual tools (saws, squares, calipers etc.), • Ability to read and interpret technical documents and drawings, • Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.), • Proficient in English, • Successful completion of a relevant apprenticeship program is required, • Professional Certification (e.g. an AWS welding certificate) will be a plus, • Physical fitness and the ability to lift 50 pounds, • Strong analytical skills, precision, and attention to detailCompany DescriptionMETO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection. We specialize in the specialize in working with the pharmaceutical and food industries.METO Systems designs and manufactures state-of-the-art stainless-steel material handling and processing equipment for a wide range of industrial processing and manufacturing applications since 1969. Whether you are looking to upgrade a single piece of equipment for an existing production line, or are developing a new manufacturing process, our engineering staff can provide expert insights and guidance on product and systems selection.\r\n\r\nWe specialize in the specialize in working with the pharmaceutical and food industries.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members., • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR QNRbzyUkve

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, and mechanical systems. Mechanics are responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Knowledge in welding and fabrication, electrical high voltage 480V, hydraulics pumps and motors, able to read electrical and hydraulic schematics, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required., • Experience working on conveyors, belts and MRF equipment., • Must be able to speak and read English well enough to converse with colleagues and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Requirements and Qualifications::, • 2+ years’ experience working as maintenance mechanic, • Experience with troubleshooting/repairing, electrical and hydraulic systems, • Working knowledge of applicable OSHA standards and regulations., • Other duties as assigned. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $24.00/Hr. Salary Range Maximum: USD $24.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills., • OEM or technical training exposure. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The On-Road Technician / Installer is a mobile field service role responsible for installing, maintaining, and repairing compactors, containers, and related waste handling equipment at customer sites. This role involves working independently in the field, managing installations, troubleshooting issues, interfacing with customers, and ensuring safe, efficient setup and operation of equipment. This position requires mechanical, hydraulic, and light electrical knowledge, with a strong emphasis on safety, organization, and professionalism. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform on-site installations of stationary and self-contained compactors, including leveling, mounting, and basic wiring or hydraulic connections., • Conduct preventive maintenance and service calls to inspect, troubleshoot, and repair compactors and other waste handling systems., • Interface with customers and facility personnel to confirm placement, functionality, and safety of installed equipment., • Coordinate with dispatch and shop teams for equipment delivery, site access, and post-install follow-up., • Test all components post-installation to ensure functionality and safety compliance., • Diagnose mechanical, hydraulic, and electrical issues in the field using manuals, diagnostic tools, and checklists., • Document work performed, parts used, and any customer concerns using service tickets or mobile forms., • Ensure proper use and maintenance of company truck, tools, and inventory., • Follow all safety protocols when working at industrial, retail, or construction sites., • Represent the company professionally, maintaining good communication and clean work practices at customer locations. Work Environment: This is a field-based position with frequent travel to customer sites. Technicians may be exposed to outdoor weather, confined spaces, heavy lifting, and noisy environments. PPE, including steel-toe boots, gloves, and eye protection, must be worn during all work. Requirements and Qualifications:: • 2+ years of experience in field service, mechanical installation, or compactor repair (preferred)., • Working knowledge of hydraulic systems, basic electrical components, and power tools., • Ability to read and interpret wiring diagrams, work orders, and technical manuals., • Valid driver’s license and clean driving record required., • Able to work independently, manage time effectively, and communicate clearly with customers., • Physically capable of lifting heavy parts, climbing ladders, and working in outdoor conditions., • Strong problem-solving skills and customer-focused mindset., • DOT certification, forklift experience, or welding background is a plus. Additional Information: IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, competitive pay, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Time Off and Holidays. All Compactor Technicians are members of a Union, and benefits will be provided as outlined in the collective bargaining agreement. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $48.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: We are seeking an experienced industrial painter with spray gun expertise to join our container maintenance team. This role is responsible for prepping, painting, and finishing roll-off containers, compactors, and other steel equipment using a spray booth system. The ideal candidate will have hands-on experience with industrial coatings, spray equipment, and shop safety practices. Candidates must also be able to wear and work with a respirator at all times while painting. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform surface preparation including grinding, sanding, masking, and cleaning to ensure proper paint adhesion., • Apply primer and finish coats to containers, compactors, and roll-off equipment using spray gun application., • Operate and maintain the spray booth and related equipment in accordance with safety and quality standards., • Mix and match paint colors and coatings to meet job specifications., • Perform daily, weekly, and monthly cleaning and maintenance of the spray booth, filters, and paint equipment., • Follow proper waste disposal and environmental procedures for paint, solvents, and chemicals., • Inspect finished work to ensure coatings meet company quality standards for appearance and durability., • Assist with shop organization, inventory of painting supplies, and reporting of material usage., • Follow all company safety policies, including PPE use, ventilation requirements, and fire hazard precautions. Requirements and Qualifications::, • 2+ years of experience with spray gun painting in an industrial, automotive, or equipment setting., • Familiarity with industrial coatings, primers, and finishing techniques., • Ability to read and follow work orders, safety procedures, and equipment manuals., • Strong attention to detail and commitment to producing high-quality finishes., • Physically able to lift up to 50 lbs and work in a shop/booth environment., • Ability to wear and properly use a respirator for extended periods of time., • Willingness to cross-train and assist in other shop functions as needed. Preferred Skills • Experience painting large steel equipment such as containers, trailers, or heavy machinery., • Knowledge of spray booth operations, airflow systems, and filter maintenance., • Basic welding or fabrication experience a plus. Work Environment • This role is primarily performed in a spray booth and maintenance shop environment. The position requires standing, bending, and lifting throughout the shift and involves regular exposure to paint fumes, solvents, and noise. Proper PPE, including respirators, will be provided and must be worn at all times. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $20.00/Hr. Salary Range Maximum: USD $22.00/Hr.