Welding jobs in Baltimore, MarylandCreate job alerts

Overview: The Quality Inspector will report to the site Quality Manager or Quality Field Operations Manager as applicable, and indirectly to the Sr. Manager of Quality Control, and will be responsible for conducting and documenting inspections in accordance with approved Inspection and Test Plans (ITPs). Quality Inspectors will ensure all reports are being documented accurately, legibly, and traceable to their locations in the field with minimal error in reporting. Quality Inspectors will be required to effectively communicate and develop positive working relationships with the owner, owner’s representative, and the Company’s site supervision, in order to facilitate the quality objectives. TRAVEL: Travel required up to 100%. Position requires presence directly on the Project Site location COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Familiarity with a broad range of general construction processes and nomenclature including testing laboratory protocols and procedures, soils and concrete testing, asphalt paving, structural steel, mechanical, welding and general construction observations., • Methodical and detail-oriented to assist the project team in assuring that Project QC documentation is complete and procedures are followed to ensure issues are closed and project risk is mitigated., • Ability to read and understand construction plans and specifications including identification of errors, contradictions or redundancies for resolution by others., • Conduct regularly scheduled QA/QC meetings, review logs of Deficiencies, Punch List, and other items required and maintain documentation and meeting minutes within job folder, • Prepare reports on inspection activities, • Scheduling of inspection activities in conjunction with various local, state, governmental agencies and 3rd party testing., • Understand and be able to identify difference between Project Specifications and Standard Codes and when project specific requirements do not meet minimum codes, administer appropriate expectations of codes as necessary to protect MasTec Industrial interests., • Consult with Director of Quality when encounter issues or concerns beyond level of expertise., • Knowledge of applicable codes and standards, • Maintain a professional attitude and appearance, • Other duties as assigned, • Minimum of 1 year of experience in a QA/QC role. Education towards an engineering or technical degree may be substituted in lieu of required work experience., • Minimum of 5 years required in a construction environment., • Training and practical knowledge of construction trades, • Extreme proficiency in Microsoft Office applications, including Outlook, Excel, Word, SharePoint, Teams, and Power Point, • Demonstrated experience with construction management software platforms, • Proven capabilities with Bluebeam Revu, • Preferred experience with Smartsheet and InEight software KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • Write reports, business correspondence and document quality related issues and activities, • Effectively present information and respond to questions from project managers, superintendents, clients, customers and the general public, • Effectively communicate and develop positive working relationships with the owner, owner’s representative, and the Company’s site supervision, in order to facilitate the quality objectives, • Work independently and productively, ensuring the resources assigned to the project are adequate and properly trained for the task, • Be self-motivated and capable of taking initiative, • Apply critical thinking skills to establish effective corrective actions for causal factors of quality incidents, • Possess diplomatic skills for addressing Quality and Safety issues with both internal and external parties, • Excellent verbal, written and interpersonal skills., • Other may duties may be assigned PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.), • Coordinate the use of eyes, hands, and feet. HOURS: This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to project requirements. What's in it for you: Financial Wellbeing • Compensation $48 - $55 per hour, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appflash

WHO WE ARE As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future. TOTAL REWARDS Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more. Expected hourly range of $29.49 to $35.05, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). In addition to your hourly wage, this role has additional earning potential through voluntary overtime and task work opportunities dependent on business needs. $5,000 Sign-On Bonus for New Hires PRIMARY PURPOSE OF POSITION The Plumbing Service Journeyman is responsible for installing, repairing, and maintaining plumbing fixtures and piping. This role should be able to demonstrate excellent diagnostic and problem-solving skills as well as achieve exceptional customer service. Routine tasks to include repair or replacement of faucets, toilets, garbage disposals, domestic water lines, and drain lines. PRIMARY DUTIES AND ACCOUNTABILITIES • Inspect, install, repair, and replace pipes, fittings, and plumbing fixtures to maintain the water supply and waste disposal systems., • Diagnose plumbing problems and work to resolve them efficiently., • Ensure compliance with safety regulations, building codes, and applicable electrical and plumbing requirements during installation and repair, identifying and correcting issues as needed., • Operate various tools and equipment such as pipe cutters, reamers, threading machines, and welding equipment., • Provide rough estimates to customers on how much it will cost to repair damaged or malfunctioning fixtures or piping., • Maintain an accurate record of all items/parts used to repair, replace, or maintain plumbing fixtures and piping., • Promote the sale of other services offered by Constellation Home to customers. MINIMUM QUALIFICATIONS • High school Diploma or GED, • Experience working in plumbing service, • Valid gas fitter's license, • Demonstrated advanced knowledge of residential plumbing service, including local plumbing and gas codes, tools, and materials, • Advanced skills in the servicing of hot water and steam boilers, • Advanced ability in the usage of sewer cleaning machines, • Proven ability to deliver excellent customer service, • Excellent written and verbal communication skills, • Ability to work weekends, holidays, and overtime, • Average physical ability (bending, stopping, and climbing ladders), • Ability to lift and carry objects of various weights, • Ability to work independently, collaboratively with minimal supervision, • Journeyman trade license in HVAC, Plumbing, or Electrical, • Must have and maintain a valid driver's license

Job Description **MUST HAVE EXPERIENCE MAINTAINING AND REPAIRING CONVEYOR SYSTEMS! Position Summary Maintain Machinery and Mechanical equipment by completing preventive maintenance requirements; dismantling devices; examining form and texture of parts; adjusting controls; fabricating repair parts; leading team members. Position Responsibilities: • Complete preventive maintenance prerequisites on mechanical equipment like motors, conveyors, production machines, pneumatic tools (i.e., power tools such as: air compressor, buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches) as well as engines, thereby ensuring smooth operation of such machinery and mechanical gadgets., • Repair conveyor system and maintain forklifts, electric, and propane equipment., • Troubleshoot and repair pneumatic, electrical, hydraulic, compressor, conveyor and inspection systems as needed., • Ensure that warehouse machinery function correctly and efficiently, so that the production shift meet the company’s shipping demands on a nightly basis, and that equipment perform optimally., • Observe, dismantle, adjust, and repair mechanical devices and control instruments as needed., • Assemble, install, and fabricate equipment as well as perform preventative and predictive maintenance as well as update all required documentation to include nightly repair logs., • Design, develop, manage and maintain control systems (i.e. Distributed Control System, Programmable Logic Controller). Perform all work and conduct oneself in a manner that promotes safety of the individual and all other at employees., • Troubleshoot, make necessary repairs or upgrades, and perform preventative maintenance and service to process control equipment, control systems, equipment calibration, and instrumentation equipment to provide for the reliable operation of this equipment. Investigate problems, analyze for root causes and derive resolutions., • Attend shop meetings and utilize/maintain personal tools., • Prepares and sets up machinery for scheduled production runs., • Maintains efficient operation of material handling equipment by clearing jams and removing foreign materials., • Familiar with automatic controls and 480 volt 3 phase electrical systems., • Familiar with Occupational Safety and Health Administration (OSHA) safety and health regulations., • Knowledge with proper use of pneumatic (i.e., power tools such as: air compressor, buffers, nailing and stapling guns, grinders, drills, jack hammers, chipping hammers, riveting guns, sanders and wrenches), electrical, and hydraulic conveyor systems., • Knowledge in basic cutting/welding, electrical/wiring and carpentry experience helpful., • Experience operating a Forklift in addition to heavy equipment., • Excellent mechanical skills in order to read and interpret technical manuals and sophisticated diagnostic equipment to perform required maintenance and service., • Able to reassemble large, complex equipment after completing a repair., • Manual dexterity required for operating machinery and equipment when handling parts, must have a steady hand and good hand-eye coordination., • Excellent problem solving/trouble shooting skills in order to observe, diagnose, and fix machinery malfunctions., • Technical experience and exposure to high-speed equipment.

Job Description Summary The Maintenance Mechanic is responsible for maintaining and repairing all equipment, piping systems, valves, and machinery associated with the Company’s operation facilities. This is a full-time hourly position located in Baltimore, Maryland. The Maintenance Mechanic reports to the Maintenance Manager. The compensation range for this position is $33.12-44.51 per hour plus a 10% bonus target. Responsibilities • Maintain safe working conditions in accordance with established Company policies., • Identify, report and/or correct unsafe work environments., • Assures compliance with all applicable environmental regulations., • Participates in on-scene work taking direction from others., • Operate all hand/power tools in a competent manner., • Install, repair, replace, and troubleshoot plant equipment to include basic piping systems, valves, traps, pumps., • Perform preventive maintenance as scheduled., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Contributes to team effort by accomplishing related results as needed., • Exercise caution in the use and maintenance of all company equipment., • Must be able to work overtime as required., • Assigned to rotating on-call schedule including nights, weekends, and holidays Basic Qualifications • HS Diploma or GED., • Minimum 1 year of maintenance experience in an industrial environment. Preferred Qualifications • Ability to communicate orally and in writing., • Ability to work with minimum supervision., • 6G Welding Certification Physical Requirements • Must submit to company provided pre-employment physical and drug screening., • Must possess a valid driver’s license and insurable by Company’s vehicle insurance carrier. Must have and maintain a driving record meeting the standards of the company., • Ability to lift and maneuver up to and including 50 pounds., • Ability to climb and tolerate heights up to 100 feet., • Must be able to walk, stand, lift, climb, bend, kneel, stoop, and/or reach., • Ability to tolerate heat in an industrial production plant environment. Benefits • Personal Leave o FMLA up to 12 weeks based on approval o Nonpaid benefit, • Paid Time Off (PTO) o 120 hours accrued annually which equals 4.62 hours per pay period, • Sick Leave o 40 hours per calendar year prorated based on month of hire, • Paid Parental Leave o 100% pay up to 160 hours upon birth or adoption of a child; must be used in weekly increments, • 7 paid holidays annually, • Floating holidays o 40 hours per calendar year prorated based on month of hire, • 401K plan o Including Roth option with matching contributions: 100% of first 1% your contributions and 50% of the next 5% of your contributions.

Job DescriptionJoin Amrize as a Mechanical Maintenance Technician and help construct what's next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! ABOUT THE ROLE To work as part of a team to ensure the continuous operation of the cement plant and associated facilities in order to maximize operational efficiency in an environment of continuous learning and improvement; to maintain, troubleshoot and repair plant equipment in accordance with plant needs within MSHA, and Amrize safety guidelines. WHAT YOU'LL ACCOMPLISH • Makes mechanical repairs on plant equipment, which may consist of replacing worn and broken parts and making necessary adjustments to put equipment back into operating condition., • Ability to disassemble machinery, remove worn and broken parts, replace usable parts, reassembles parts., • Installs machinery, caring for alignment, setting, seating, leveling, balancing and adjusting of component parts., • Ability to perform burning and basic welding as required., • Willing to load and unload repair parts going to and from machine shop and repair site., • Inspects mechanical dust collectors for maintenance and repair needs, replaces bags and lubricates as required., • Ability to fabricate, install and repair safety devices and guards for plant equipment., • Prepares for metal fabrication by measuring objects and working from sketches and drawings., • Ability to fabricate metal items such as oil pans, boxes, ducts, spouts, etc., • Willing to perform maintenance and repairs on buildings' doors, windows, landings, plumbing, etc., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Required Education: High School diploma/GED Additional Education Preferred: Mechanical Qualifications/ Certificates of training Field of Study Preferred: Mechanical Maintenance Required Work Experience: Minimum 2 years' experience in manufacturing environment in maintenance Additional Requirements: • Knowledge of overall cement plant operations, or comparable heavy industrial environment, is preferred., • Must possess a valid driver's license, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job DescriptionLocation: Sparrows Pt Cement Plant MD Job Req ID: 16375 Join our amazing team and contribute as a: Maintenance Technician ABOUT THE ROLE This is a Mechanical Maintenance position, basic electrical experience is a plus. Performs various tasks associated with the inspection, root cause failure analysis and repairs of mechanical systems. This includes preventative maintenance, repair, welding, maintenance inspection and troubleshooting of plant equipment. WHAT YOU'LL ACCOMPLISH • Strong welding and cutting skills with ability to work from blueprints, sketches, or detailed instructions, • Focuses and maintains a clean and orderly work area and participates in plant housekeeping activities., • Repair equipment such as fans, screw conveyors, belt conveyors, reducers, bucket elevators, dust collectors, rotary feeders, vertical roller mills, ball mills and other material handling equipment, • Have a basic understanding of hydraulics and be able to read schematics, • Respond to call-outs during non-work hours as needed., • Alignment from motor to gearbox, motor to pump, gearbox to open gear or similar equipment, • Make estimates of material requirements and prepare requisitions and reports., • Participates in formal and on-the job training programs to acquire/broaden both technical and non-technical job skills; participates in cross training activities., • Make estimates of material requirements and prepare requisitions and reports., • Suggests programs that reduce/contain costs and/or increase productivity. Takes independent action to resolve problems when appropriate., • Applies skills and performs work in other positions as assigned., • Supports other plant functions as assigned., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Required Education: High School diploma/GED Additional Education: Welding Certification preferred Required Work Experience: Required Experience: 2-4 years industrial maintenance is required. Experience with rebuilding gear boxes, shaft alignment on heavy industrial equipment, bearing installation is desired. Additional Requirements: • Knowledge of overall cement plant operations, or comparable heavy industrial environment, is preferred., • Must possess a valid driver's license, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description Our Baltimore location is expanding and adding machinery, and we are currently looking for skilled Maintenance Mechanics,that would bedirectly responsiblefor maintaining and repairing machinery, equipment, and systems in a food processing environment. In this role you will use your technical knowledge and problem-solving skills to identify and fix issues, ensuring the optimal performance of machines and minimizing downtime. Employment Benefits & Incentives: • Full-Time Hourly Positions- $20.00-$40.00 based on experience, • Weekly Payroll via Direct Deposit, • Product Discounts, • Sliced lunch meats provided daily, • MTA Discounts, • Paid Time Off, • Holiday Pay, • Laundered Uniforms, • Benefits Package Including- Today, at Dietz & Watson, the fourth generation of the family continues Gottlieb Dietz’s dedication and commitment in preparing our Premium Deli Meats and Artisan Cheeses. In fact, all of our standards exceed those set by government guidelines. Our mission is always both perfection and originality. This is how we prepare wholesome, nutritious and uniquely premium meats. And our Master cheese makers create our hand-churned, small batch cheeses with the same commitment to “quality above all”. What You Bring • Visually inspect machinery /equipment for defects such as breakage or excessive wear, • Repairing production or processing equipment., • Strong controls experience, • Specializes in troubleshooting and repair of modern automated equipment., • Troubleshoots and analyzes complex problems and implements proper remedies while ensuring that all safety guidelines and regulations are adhered to when repairing or maintaining equipment., • Listen for unusual sounds from machines or equipment to detect malfunctions., • Collaborate with other maintenance technicians and engineering staff to troubleshoot and resolve issues., • Dismantle defective machines and equipment and install new or repaired parts., • Clean and lubricate shafts, bearings, gears, and other parts of machinery and equipment., • Maintain operations of systems such as pneumatic, hydraulic, ammonia, etc., • Install and repair electrical apparatus, such as transformers, breakers, switches, receptacles, wiring, and electronic components of machinery and equipment., • Repair, replace, and maintain the physical structure of equipment., • Operate cutting torches or welding equipment to cut or join metal parts., • Preventative maintenance of equipment., • Ability to interpret blueprints, schematics, and manuals., • Ability to work independently and be self-motivated., • Working with Material Handling Equipment daily., • Fast paced work environment with, in, and around industrial machinery., • Cold storage environment. Production rooms are kept at a constant 32 degrees (and below in certain areas). Ability to withstand cold storage temps for extended periods of time., • Capability to bend, twist, and squat as needed throughout the shift., • Ability to lift to 50 pounds without reasonable assistance., • Must be able to frequently push, pull, kneel, bend, and reach with both arms.

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”) This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $174,060.00/Yr. ID 2026-19651 Category Body Technician Position Type Regular Full-Time Location : Postal Code 21244 Location : Address 6901 Security Boulevard #2000 Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $174,060.00/Yr. Prioritization Tier 1 – Priority

Job Description JCM Associates, Inc. is hiring HVAC Mechanics for full time year-round positions in commercial mechanical construction projects in the MD, VA, and DC area. JCM Associates, Inc. provides mechanical services throughout the Washington DC Metropolitan area. We take pride in every project we take on and strive to communicate and accomplish the goals each one of our clients sets out to achieve. These services include new construction, renovation and maintenance of HVAC and Plumbing systems for plan-spec, design-build and design-assist commercial and high-rise residential buildings. Key Responsibilities: • Repairs, overhauls, maintains, and services industrial residential heating, ventilating, and air conditioning systems and refrigeration units. Troubleshoots and locates malfunctions, diagnoses problems, and determines appropriate repairs., • Adjusts, repairs, or replaces thermostats, pressure stats, relays, switches, and electrical wiring., • Repairs or replaces compressors and components, electric motors, fans, belts, and pulleys., • Mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications., • Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment., • Installs evaporator unit in chassis or in air-duct system, using hand tools., • Services and repairs evaporators, condensers, and receivers. Repacks valves, lubricates moving parts, replaces filters, and cleans coils., • Works from blueprints, drawings, models, and/or verbal and written instructions., • Maintains refrigerate inventory and consumption logs., • Follows established safety procedures and utilizes safety protective equipment and clothing pertaining to particular trades or skills., • Performs other related duties as assigned., • Descale tubing; cut and thread pipe; make pipe and low voltage connections., • Provides proper methods of storing and maintaining tools, equipment and supplies in a safe and orderly condition., • Meet schedules and time lines., • Record and report all faults, deficiencies, and other unusual occurrences, as well as the time and materials expended on work orders, • Test pipe or tubing joints and connections for leaks, using pressure gauge or soap-and-water solution., • Do u need a license??, • 5 years of experience building commercial mechanical projects, • Strong communication skills, • Knowledge of commercial HVAC systems, • Ability to read, understand and work from drawings, specifications and schematics, • Understands written and verbal instructions, • Ability to work in a fast-paced, high-pressure environment, • Attendance, reliability, dependability and flexibility, • Excellent compensation (define further), • Company Truck, • Year End Bonuses, • Paid Holidays, • Paid Vacation, • Paid Parking, • 401K, • Owner-funded retirement plan JCM offers competitive salary/hourly range reflective of candidate's experience?? Drug Free / E.O.E. Job Posted by ApplicantPro

Job DescriptionDescription: Job Summary $5000-$7500 Sign On Bonus depending on experience. We are seeking a skilled HVAC Technician to join our team. The ideal candidate will have a strong background in heating, ventilation, and air conditioning systems, with the ability to troubleshoot and repair various HVAC equipment. This role requires both technical expertise and excellent customer service skills as you will be working directly with clients to ensure their comfort and satisfaction. Responsibilities • Install, maintain, and repair heating, ventilation, and air conditioning systems in residential and commercial properties., • Diagnose and troubleshoot HVAC system issues using schematics and technical manuals., • Perform routine maintenance on HVAC systems to ensure optimal performance and efficiency., • Weld components as necessary for repairs or installations., • Conduct refrigerant recovery and recharge as per regulations., • Provide field service support by responding to service calls in a timely manner., • Repair appliances related to HVAC systems as needed., • Assist with plumbing tasks related to HVAC installations or repairs., • Maintain accurate records of work performed and parts used during service calls., • Proficient in air conditioning installation and repair techniques., • Strong understanding of schematics and technical documentation related to HVAC systems., • Experience with welding techniques for metal components., • Knowledgeable in refrigerant handling practices and regulations., • Familiarity with appliance repair related to HVAC systems is a plus., • Basic plumbing skills are beneficial for integrated systems work., • Ability to utilize diagnostic tools such as an ohmmeter for troubleshooting electrical components., • Strong communication skills for effective interaction with clients and team members., • HVAC (Required), • 401(k), • 401(k) 4% Match, • 401(k) matching, • Company truck, • Dental insurance, • Employee discount, • Flexible schedule, • Fuel card, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance

Job Description JCM Associates, Inc. is hiring HVAC Mechanics for full time year-round positions in commercial mechanical construction projects in the MD, VA, and DC area. JCM Associates, Inc. provides mechanical services throughout the Washington DC Metropolitan area. We take pride in every project we take on and strive to communicate and accomplish the goals each one of our clients sets out to achieve. These services include new construction, renovation and maintenance of HVAC and Plumbing systems for plan-spec, design-build and design-assist commercial and high-rise residential buildings. Key Responsibilities: • Repairs, overhauls, maintains, and services industrial residential heating, ventilating, and air conditioning systems and refrigeration units. Troubleshoots and locates malfunctions, diagnoses problems, and determines appropriate repairs., • Adjusts, repairs, or replaces thermostats, pressure stats, relays, switches, and electrical wiring., • Repairs or replaces compressors and components, electric motors, fans, belts, and pulleys., • Mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications., • Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment., • Installs evaporator unit in chassis or in air-duct system, using hand tools., • Services and repairs evaporators, condensers, and receivers. Repacks valves, lubricates moving parts, replaces filters, and cleans coils., • Works from blueprints, drawings, models, and/or verbal and written instructions., • Maintains refrigerate inventory and consumption logs., • Follows established safety procedures and utilizes safety protective equipment and clothing pertaining to particular trades or skills., • Performs other related duties as assigned., • Descale tubing; cut and thread pipe; make pipe and low voltage connections., • Provides proper methods of storing and maintaining tools, equipment and supplies in a safe and orderly condition., • Meet schedules and time lines., • Record and report all faults, deficiencies, and other unusual occurrences, as well as the time and materials expended on work orders, • Test pipe or tubing joints and connections for leaks, using pressure gauge or soap-and-water solution., • Do u need a license??, • 5 years of experience building commercial mechanical projects, • Strong communication skills, • Knowledge of commercial HVAC systems, • Ability to read, understand and work from drawings, specifications and schematics, • Understands written and verbal instructions, • Ability to work in a fast-paced, high-pressure environment, • Attendance, reliability, dependability and flexibility, • Excellent compensation (define further), • Company Truck, • Year End Bonuses, • Paid Holidays, • Paid Vacation, • Paid Parking, • 401K, • Owner-funded retirement plan JCM offers competitive salary/hourly range reflective of candidate's experience?? Drug Free / E.O.E. Job Posted by ApplicantPro

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off National Generator Specialist Company is looking for a Regional Industrial Mechanical and Technical Site Manager to help our growing customer base. Experience in installing, servicing, and supporting Custom Generator Component jobs at Data Centers, Government Buildings, Marine Sites, and Energy facilities is preferred. Responsibilities: Tier 4 Emissions upgrades Generator Enclosure Repair and Installation Welding, and Fabrication Fuel Tanks, Fuel Polishers Stairs and Platform installations Battery Installations Piping and Plumbing Cooling Packages Craning and Rigging Requirements: • High school diploma or equivalent; technical certification preferred., • Minimum of 3 years of experience in generator installation or service., • Valid driver's license and clean driving record., • Strong understanding of electrical systems and mechanical components., • Excellent problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Strong communication skills and customer-focused attitude. We offer Top Tier Total Compensation Packages and work with some of the best companies in the world.

Job Description Sign-On Bonus – $2,500 (All locations | Shop & Field Technicians), paid at six months and one year, plus a $2,500 Tool Credit issued after 90 days of employment. Position Purpose: Employees in this position must perform a variety of activities designed to service, repair, and maintain pieces of heavy equipment. The work is performed through the application of a body of knowledge and specific certifications that denote expertise in the field of heavy equipment maintenance. Essential Job Functions: • Repairs equipment in a safe, timely and cost-effective manner whether in the field or in the shop., • Troubleshoot electrical, engine, transmission, brakes, steering, frame, cab and hydraulic systems. This includes reading diagrams, service manuals, service bulletins, etc. May also require using trouble shooting web tools such as VCAD’s on the Volvo Dealer Network., • Inform customers on problems and costs required to repair unit/equipment. Order parts necessary to repair unit and follow up with parts department on backorders., • Welding on equipment as needed., • Perform routine maintenance checks and adjustments on such things as fluid levels, hoses, belts, brakes, tires, and clutches; change filters and oil., • Submit paperwork in a timely manner including: daily notes, timecards, tech-line reports, expense reports and warranty parts., • Maintain service truck by filling out daily inspection reports and utilizing ELD., • Developing knowledge is required at the intermediate level, considerable knowledge is required at the experienced level, and thorough knowledge is required at the advanced level., • Knowledge of the standard practices, materials, tools, and equipment used in the repair and maintenance of motor vehicles and engines., • Skills in the use of a variety of hand tools., • Skills in the use of mechanized tools, jacks, and hoists, • Skills in the use of a variety of diagnostic testing and tuning equipment, • Ability to diagnose mechanical, electrical, and hydraulic malfunctions, • Ability to read manuals and schematics, • Ability to rebuild engines and major driveline components, • Ability to communicate with other mechanics about repair work needed, • Lifting, carrying, reaching, pushing, and/or pulling; climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling; and significant finger dexterity necessary., • Ability to lift 70 lbs., • Ability to operate a forklift safely., • Must be able to pass a pre-employment WorkSTEPS physical., • Requires passing a pre-employment background check and drug screen to the satisfaction of McClung-Logan Equipment Company., • This position is exposed to work near moving mechanical parts, and moderate noise levels., • Must possess a clean MVR & valid Driver's License, • This job requires the ability to obtain a DOT Medical Certification., • Requires working and driving outdoors in various climates/temperatures and the possibility of sitting for an extended period

Job Description Clearsite Industrial Services is a leading provider of hydrovac and vacuum excavation solutions, renowned for our commitment to safety, efficiency, and reliability. Based in Baltimore, Maryland, we operate a modern fleet of vacuum hydrovac trucks and serve as a trusted partner to our customers in the construction industry. As a Hydrovac Diesel Mechanic, you will play a vital role in ensuring our specialized equipment is maintained to the highest standards, supporting field operations and contributing directly to our reputation for safe dig services. You will work closely with both shop and field teams to keep our trucks and heavy equipment operational and compliant. Key responsibilities include: • Inspect, diagnose, and repair diesel-powered hydrovac trucks, vacuum units, and related heavy equipment—including engines, transmissions, chassis, hydraulics, pneumatics, vacuum/blower systems, and electrical systems., • Perform preventative maintenance inspections and services such as greasing, fluid checks, belt and hose replacements, alignments, adjustments, and comprehensive safety checks to ensure road and job-site readiness., • Troubleshoot breakdowns both in the shop and in the field, respond to emergency service calls, and coordinate with field crews to resolve issues efficiently., • Maintain parts inventory and consumable supplies, ensure specialty tools are available, and schedule work orders with operations to minimize equipment downtime., • Maintain accurate service records and inspection logs; support safety audits and regulatory inspections; stay current on OEM standards, diagnostic tools, and regulatory requirements., • Operate hand and power tools, welding equipment, hydraulic test benches, and diagnostic software; maintain a clean, safe, and orderly shop environment., • High school diploma or GED, • 3+ years of hands-on heavy equipment or commercial diesel truck repair experience, • Strong mechanical and diagnostic skills in diesel engines, hydraulics, and electrical systems, • Proficiency with diagnostic scan tools and mechanical testing instruments for troubleshooting, • Valid driver’s license, • Ability to lift at least 50 lbs, • Authorized to work in the United States, • Experience coordinating maintenance and repairs with operations and field teams, including maintaining service records and inspection logsPreferred Qualifications:, • Experience working on hydrovac/vacuum trucks or vacuum excavation equipment, • Experience working on Freightliner trucks/chassis, • Experience working on Allison transmissions, • Knowledge of DOT compliance laws, rules, and regulations for commercial vehicles, • Union wages: Competitive hourly compensation of $32–$40 per hour, • Overtime available, • Union Benefits, • Medical, Dental, and Vision coverage, • Vacation days, • Training opportunities, • Pension plan

Job DescriptionWe’re a busy, established collision center built on quality workmanship, strong team dynamics, and genuine respect for our skilled technicians. We believe great results come from experienced people who take pride in their craft. If you’re a skilled automotive collision repair technician looking to join a professional, supportive team, we encourage you to apply today.Key Responsibilities • Review repair orders and estimates to determine required parts and the scope of work prior to beginning repairs., • Perform body, frame, and structural repairs accurately and efficiently in accordance with manufacturer guidelines and company standards., • Tear down and inspect vehicles to identify hidden or additional damage and communicate findings to the estimator., • Complete repairs, including body panel work, structural welding, alignment, and related mechanical or electrical repairs as needed., • Communicate proactively regarding supplemental repair needs or potential delays that may impact timelines., • Road test vehicles when necessary to ensure all repairs meet quality and safety standards., • Stay current on repair techniques, equipment, and manufacturer procedures, and provide guidance to apprentice technicians when applicable.QualificationsRequired, • Proven experience performing frame and structural collision repairs in a professional body shop or collision repair environment., • Strong working knowledge of tear down, damage analysis, and structural repair procedures in accordance with manufacturer and safety standards., • Ability to work independently, maintain productivity, and produce high‑quality repairs in a fast‑paced, high‑volume shop., • Valid driver’s license with a clean driving recordPreferred, • Hands‑on experience with frame machines, structural welding, suspension repairs, and alignment., • ASE certifications related to collision repair, structural damage analysis, mechanical/electrical components, or State Vehicle Inspector certification., • Health, dental, and vision insurance, • Coverage options available for employee only, employee + child(ren), employee + spouse, or family, • Supplemental insurance options, including disability, accident, and life insurance (available for employee, child, or family coverage when applicable), • Competitive paid time off (PTO), • PTO renews annually; first 40 hours available after 106 days of employment, • Paid holidays, • 401(k) retirement plan with company match (waiting period applies), • Paid training, • Free Thanksgiving turkey each yearWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionSalary: $20-$29 North American Millwright Services is a well-established and trusted Millwright Contractor that takes on some of the most complex industrial maintenance/manufacturing projects in the Chesapeake Region. This is your chance to join a growing, dynamic team and have a rewarding career. We are hiring team-oriented millwrights, entry-level through senior level. Rigging and Welding certifications or experience a plus (TIG, MIG, Stick); in-house training also available. Total Compensation Package includes: • Competitive Pay, • Medical, • Dental, • Vision, • Life Insurance (at no cost to you!), • Disability Insurance (at no cost to you!), • 401(k) Plan (up to 8% employer match), • Uniforms, • Safety shoe reimbursement, • Paid Holidays, • Paid Time Off, • Discretionary Bonus, • Referral Bonus, • Tuition Assistance Job Summary A millwright is tasked with installing and maintaining equipment used in multiple industries. Work includes installing, transferring, dismantling, and repairing equipment and machinery including welding. Job sites vary from factories, mine sites, and other industrial sites. Millwrights must be able to make decisions, troubleshoot, and perform repairs with little to no supervision. The ideal candidate will be have a strong working knowledge of industrial maintenance, welding and rigging. Duties and Responsibilities • Adheres to all NAMS policies and OSHA/MSHA safety rules & regulations, • Takes swift action to stop any imminent danger situations you may encounter, • Promptly reports all accidents and near misses, including minor first aid and property damages prior to end of shift;, • Conducts daily workplace exams; identifies and promptly resolves potential hazards or immediately barricades area or equipment and contacts NAMS and/or the customers safety team to resolve, • Builds the foundation for machines, • Constructs and installs equipment such as shafting, conveyors and rails, • Review and interpret engineering specifications, schematics and blueprints to determine work procedures, • Grind and file machinery parts, • Work with a range of hand tools, measuring tools, welding and brazing equipment, • Determine which machines, techniques, and tools to use specific to each job, • Travel to customer job sites, including extended stays during from time to time Requirements and Qualifications • High school diploma or certification in a skilled trade, • Completion of accredited millwright certification program a plus, • 3 years' relevant experience in an industrial or construction setting, • Ability to read drawings, plans, and blueprints and convey this information to others, • Ability to communicate effectively including interpersonal skills; must be a team player, • Aptitude in math, • Attention to detail, • Strong decision making and problem-solving, • Good physical condition and stamina, • Valid Drivers License with an acceptable driving record, • Owns minimum personal tools required for essential tasks Physical Requirements: • Frequently required to walk, sit, stand, balance, stoop, bend, push, pull, lift, reach, kneel, crouch, crawl and climb stairs/ladders and use of hands, • Must have vision, hearing, and ability to talk, • Exposure to hot/cold temperatures, • Must be able to lift up to 50 pounds at times, • Ability to travel independently throughout multiple NAMS facilities including customer job sites North American Millwright Services Inc is an equal opportunity employer

Job Description DSM Contracting is currently seeking a Lead SHOP Mechanic in Baltimore, Maryland to keep our construction vehicles, machinery and heavy equipment running strong. If you can diagnose issues, make repairs, and help lead shop operations - this role is for you. Pay based on experience + overtime opportunities What You'll Do: • Lead troubleshooting, diagnose, repair and maintain dump trucks, heavy and light duty trucks, trailers, and heavy equipment, • Perform preventative maintenance on fleet, heavy equipment, as well as heavy and light duty trucks, • Troubleshoot mechanical, hydraulic, and electrical issues, • Help prioritize and coordinate daily shop repairs; assist coordinating shop workflow repair activities to support efficiency, • Inspect all equipment vehicles regularly for compliance, • Ensure all repairs meet DOT and OEM standards, • Maintain service records and documentation, • Perform and review "check in" and "check out" inspections for fleet equipment accuracy and completeness, • Provide technical guidance, mentoring, and training to mechanics and technicians, • Communicate equipment status with supervisors and field crews, • Respond to and communicate with internal requests for service or repairs, • Follow all safety policies and procedures, • Promote and maintain a safe, clean, and efficient shop environment, • Order and track parts. Support parts coordination and assist with shipping/receiving as needed, • Assist leadership with shop operations and process improvements as opportunities arise What We’re Looking For: • Experience with diesel, fleet, and heavy equipment repair, • Experience with Mack (Maxitorque) trucks, • Strong diagnostic and troubleshooting skills, • Ability to work independently and manage multiple tasks, • Valid driver’s license required, • Bilingual (Spanish/English) strongly preferred Ideal Candidates: • CDL license Class “A” with manual endorsement desired, • Willing to consider Class "B" with manual endorsement, • 5+ years of experience, • Natural engineering and problem-solving senses, • Welding and fabricating skills, • Basic computer skills, • Dependable and reliable attendance What’s Included: • Competitive compensation-paid weekly., • Medical, Dental, Vision Plans, • 401(k) with a company match, • Paid Time Off, • Overtime opportunities, • Growth Opportunities, • And more EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Company DescriptionDSM Contracting is a certified woman-owned minority company specializing in Excavation, Utility, Sitework, SWM, Paving, Construction & Ancillary Buildings.DSM Contracting is a certified woman-owned minority company specializing in Excavation, Utility, Sitework, SWM, Paving, Construction & Ancillary Buildings.

Oceaneering Technologies (OTECH) develops, manufactures, and operates customized marine systems, shipboard equipment, subsea vehicles, and engineered solutions for commercial and U.S. military vessels. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Senior Designer applies creative design skills and computer aided design drafting (CADD) practices to the generation of layout, assembly, and detail drawings for mechanical, hydraulic, electrical, and electronic equipment of simple to moderate complexity for a variety of ADTECH projects. The Senior Designer may also prepare sketches and other graphic information for use within technical documents, proposals, and sales-related documents. May act as a technical lead for the work of other less experienced designers and drafters on a specific project. ESSENTIAL: • Works closely with engineers and more senior designers to make drawing corrections and works independently to makes changes in accordance with drawing redlines. Works directly with engineers and manufacturing personnel to make on-the-fly drawing updates., • Must perform independently and in a highly collaborative environment working with multiple project teams. Must be comfortable in environments where scope and requirements change frequently., • Checks technical accuracy and completeness of drawings., • Independently, prepares CADD solid models at the part and assembly level using Dassault Systemes SolidWorks; completes layout and detail drawings, including application of Geometric Dimensioning and Tolerancing, for simple to moderately complex equipment or mechanisms., • Creates independent, original designs for simple to moderately complex parts and assemblies; interacts with engineering and manufacturing personnel to ensure manufacturability, maintainability, and proper assembly., • Prepares engineering drawings, layout, and detailed design of mechanical systems using drafting techniques SolidWorks, • As required, works independently to select commercial off-the-shelf components (electrical and mechanical) that meet stated performance requirements., • Mentor designers and drafters to ensure consistency in design and drawings. Regularly, coordinates work of one or more designers and drafters on a project., • Provides input to engineering lead and/or Program Manager regarding design / drafting resources required for defined scope of work within defined schedule and budgetary constraints., • Assists in estimating costs / schedule related to design / drafting tasks for bids and proposals., • Participates in Technical Working Groups to provide continuous improvement to OTECH processes. Ensures designs meet quality standards and customer requirements., • Additional duties as assigned. REQUIRED: • 7-10 years of CAD design experience., • Associate's degree in design, drafting, or related engineering field, or equivalent work experience., • Formal training in use of Dassault Systemes SolidWorks solid modeling software., • Proficient in SolidWorks Routing Program, Sheet Metal Program, Weldment Program, and product data management., • SolidWorks Advanced Parts and Advanced Assemblies certificate preferred., • Familiarity with Military Standards and ANSI 14.5 drafting standards including geometric dimensioning and tolerancing., • Familiarity with phases of production, machining, and manufacturing. Working knowledge of manufacturing and fabrication, such as machining centers (CNC), sheet metal, and welding fabrication., • Experience in structural design., • Ability to work independently and to supervise other designers and drafters in development of original designs, modifications to existing designs, and technical drawings of parts and assemblies on highly complex assemblies and systems., • Good verbal and interpersonal skills necessary to effectively communicate with vendors and customers., • Ability to interact with managers and engineers to solve difficult technical problems and challenges., • Ability to communicate effectively in writing., • Able to work overtime hours as needed., • Strong knowledge of Microsoft Word, Excel, and Powerpoint., • Must be able to obtain security clearance and pass a drug test. This position is Hybrid - Remote and will require commuting to a designated office. Hybrid work schedules are determined by the hiring manager based on business need. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Base Pay rate for this position: $34.74 - $46.98/Hour. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description Aerotek is currently hiring for maintenance mechanics in the greater Baltimore, MD area! Please see details below: Job Description We are seeking a dedicated Maintenance Mechanic to ensure the smooth operation and reliability of our equipment and machinery. The successful candidate will play a crucial role in maintaining high standards of safety and efficiency within our facility. Responsibilities • Perform preventative maintenance, troubleshooting, and repairs to production machinery including but not limited to conveyor belts, gear boxes, motors, pumps, packaging machinery, etc,, • Fit and install new parts as needed, • Carry out quality inspections on machinery, • Respond immediately to equipment breakdowns, • Fix faults or arrange for replacements to be installed, • Conduct scheduled checks on machinery and parts, • Proficiency with 3-phase, 480V systems, • Experience with feed systems, gearboxes, and hydraulics, • Skills in maintaining and operating PLCs and motors, • Ability to read and interpret blueprints Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Are you ready to take your welding skills to the next level? Hanover Iron Works, Inc. is seeking a skilled Full-Time Field Ironworker Welder to join our team. Our team works on exciting construction projects installing stairs, rails, and miscellaneous metals. Apply today and be part of something extraordinary! You will be given great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Competitive Salary, and Paid Time Off. What would you do as a Field IRONWORKER Welder • Utilize welding and fabricating skills vital for the installation of stairs, rails and miscellaneous metals, • Organize tools and materials for the installation of stairs, rails, and miscellaneous metals, • Follow all safety procedures and expectations, including wearing proper PPE and site-specific safety plans, • Ensure that work performed exceeds the high-quality standards of Hanover Iron Works, Inc.What we're looking for in a Field IRONWORKER Welder, • Experience in the misc. metals field preferred, • Ability to read and interpret documents such as blueprints, safety rules, Tool-Box Shop Talks and safety procedures, Operator's Manuals and maintenance instructions, • Ability to write routine reports and correspondence, • Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals, • Understanding of angles and degrees, • Working knowledge of AWS D1.1. and the following processes, SMAW, FCAW, GMAW and GTAW, • Current welder certifications or ability to pass weld test, • Knowledge of industry tools and equipment Equal Opportunity Employer: All qualified applicants are encouraged to apply. Hanover Iron Works, Inc. is a Drug Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Hanover Iron Works, Inc. is a participant in the Federal E-Verify Program. Job Posted by ApplicantPro

Job DescriptionFor those who want to keep growing, learning, and evolving. We at Kelly® hear you, and we’re here for you! We’re seeking a Maintenance Technician to work at a premier manufacturing facility in Baltimore, MD. Sound good? Take a closer look below. You owe it to yourself to consider this great new opportunity. Salary/Pay Rate/Compensation: $32 an hour . Why you should apply to be a Maintenance Technician: • Join a dynamic team in a fast-paced manufacturing environment that values safety and employee well-being., • Enjoy a varied shift schedule with opportunities for overtime and weekend hours., • Work with cutting-edge mechanical and electrical systems, enhancing your skills and experience., • Be part of a company that supports your growth and development in the maintenance field. What’s a typical day as a Maintenance Technician? You’ll be: • Maintaining and repairing mechanical, electrical, and boiler systems to ensure efficient operations., • Dismantling machines and reassembling them after repairs, ensuring all parts are functioning correctly., • Conducting inspections and tests on damaged machine parts, marking defective areas and advising supervisors on necessary repairs. This job might be an outstanding fit if you: • Have a high school diploma or GED and 1-2 years of related maintenance experience., • Possess knowledge of hand and power tools, as well as experience operating a forklift., • Are familiar with electrical, plumbing, carpentry, welding, and boiler maintenance, with a mechanical background in rotating equipment. What happens next: Once you apply, you’ll proceed to next steps if your skills and experience look like a good fit. But don’t worry—even if this position doesn’t work out, you’re still in our network. That means all of our recruiters will have access to your profile, expanding your opportunities even more. Helping you discover what’s next in your career is what we’re all about, so let’s get to work. Apply to be a Maintenance Technician today! #cb P1 As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Why Kelly®? As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work-just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical assembly and fabrication, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical assembly and fabrication, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job DescriptionSalary: MECHANICAL ENGINEERING & CONSTRUCTION CORPORATION Job Title: Journeyman Pipe Fitter Department: Piping & Plumbing Grade: Exprienced Supervisor: Piping & Plumbing Superintendent $35 - $39 per hour Full-time • Health Insurance, • Dental Insurance, • Vision Insurance, • Paid holidays, • Paid time off, • Paid training, • 401(k) Journeyman Pipe Fitters: Look no further for your long-term career home! Join the award-winning team of construction and maintenance professionals at MEC2 where you can look forward to incredible stability and security in your career. Enjoy consistent year-round work, industry leading pay, and a supportive company culture that embodies safety, integrity, and professionalism. MEC2 (Mechanical Engineering and Construction Corporation) is searching for Journeyman Pipefitters to join the Commercial and Industrial HVAC Service and Maintenance team in the general DC/VA/MD Metropolitan area. At MEC2, we build loyalty and trust by investing in our people, offering not just industry leading benefits and pay, but extensive training, job growth, and career opportunity. Choosing to work with MEC2 is more than a job; its a career with a tight-knit team committed to helping you grow. Why We Are Different: • We are a large company with a personal touch., • Our owners are actively involved in day-to-day operations., • Our creativity is enhanced through constant dialogue and communication., • Our culture is built on Pride, Performance, Professionalism, Loyalty, and Trust As a member of the team, you can expect: • Competitive pay for the area Negotiable based on your years of experience., • Full benefits package Including medical, dental, vision, life, disability, paid time off, paid holidays, 401k, educational assistance, and more., • Consistent year-round work., • Local job sites All site work will be in the metro DC/VA/MD area. Daily travel will be required, but you can expect to be home every night., • Career growth There are always opportunities to progress your career here through continued training and advancement., • Secure opportunity This is not just a one job and done position; You will be hired as a permanent long-term employee with the company., • Safety is the priority Our goal is to send everyone home to their families in the same condition they arrived each day., • Award winning company reputation We have been honored with multiple awards through Associated Builders and Contractors, including: 12 awards for Excellence in Construction, 8 awards for Excellence in Safety, Project of the Year award for 2014 and 2016, and the National Diversity Excellence Award for hiring and retention practices in 2015. If the following describes you, we want to hear from you: • Are a Journeyman Level Pipefitter or Gasfitter, • Have at least one of the following certifications: HVAC-R, Welding, or Gas Fitting., • Able to pass a background check and obtain security clearance. Responsibilities: • Directly responsible for and have experience with all phases of central plant construction including boiler, chiller, and cooling tower installation, coil connections, pumps, and heat exchangers., • Read plans to perform necessary work., • Perform layout., • Maintain a complete set of tools., • Responsible for company assets used on job site., • Make purchases at local supply houses following Company procedure., • Hold a valid driver license., • Other duties as assigned. Mechanical Engineering & Construction Corporation (MEC2) is committed to providing equal employment opportunities to employees and applicants for employment without regard to race, color, religion, sex, age, national origin, ethnicity, pregnancy, childbirth or related medical conditions, sexual orientation, gender identity, hairstyle, marital or family status, physical or mental disability, uniformed service, military status, protected veteran status, genetic information or any other characteristic protected by federal, state, or local law. About the Company: Unparalleled teamwork, dedication and resourcefulness have helped MEC2 grow into one of the industrys leading mechanical design and construction firms. With unwavering commitment to our clients, our projects and each other, MEC2 has grown into a company of over 150 tradespeople with two locations proudly serving Maryland, Washington, D.C., and Virginia. Gmail Users: If you do not receive a confirmation email after completing your application, please check your Spam folder just in case the confirmation email was delivered there instead of your inbox. If so, select the confirmation message and click Not Spam, which will allow future messages to get through. For assistance, please contact our Human Resources department at 443-200-1000.

Job DescriptionIndustrial Pipefitters/Steamfitters for field work from Elkton MD to DC along I-95, as well as the Baltimore Beltway. Start: ASAPDuration: 4+ monthsPay: $26-$35 DOENo per diem, local only Responsibilities:As a Pipe Fitter, you will be responsible for material take offs and the assembly of piping systems IN THE FIELD to produce high-quality products. Piping systems will range in size from ½” to 12” diameter, and connection types including: butt weld, socket weld, flanged, and threaded. This position offers the opportunity to work in a dynamic environment that values precision and craftsmanship. Requirements:Must pass 10-panel drug screening. Must have 2-5 years of previous experience in pipefitting, preferably in an industrial environment. Need familiarity with ASME codes and standards, as well as SMAW, GTAW and FCAW welding processes. Flexibility to work in both clean (food-grade) and dirty (recycling facilities) environments. Reliable transportation and active driver's license.

ABOUT US Arc3 Gases is a family-owned, independent distributor of industrial gases, welding supplies, safety products, and hardgoods used in metal fabrication industries. We prioritize family values and a focus on people while safely delivering solutions to the customers we serve. Our core values include trust, responsiveness, reliability, and technical competence. JOB SUMMARY The CO2 Service Technician is responsible for safely and efficiently installing new and maintaining existing Bulk CO2 product systems and related supplies in accordance with all federal, state and local laws and company policies. RESPONSIBILITIES • Install CO2 bulk installations at customer sites., • Perform all related duties to deliver product and supplies to assigned customers., • Inspect, maintain and repair new and existing Bulk CO2 systems., • Install and maintain decals and warning signs that identify hazards, equipment ownership, normal operational settings, emergency contacts, etc., • Train customer personnel on how to operate equipment., • Inspect vehicle before and after use according to DOT and company maintenance checklist., • Load Microbulk tanks and fill customer-owned bulk tanks as assigned., • Maintain load manifests and all other vehicle documents, ensuring they are properly completed and balanced with truck counts and shipping documents before and after deliveries., • Work closely with customers to ensure that Arc3 is meeting their expectations., • Perform annual inspections of all bulk installation sites to assure their sound condition and correct operation., • Work safely and follow all Arc3 safety policies and procedures., • Maintain an appropriate stock of recommended parts necessary to repair typical installations., • Perform any other duties Arc3 Gases may assign to you. REQUIRED KNOWLEDGE, SKILLS AND EXPERIENCE • High School Diploma or equivalent, • Operate forklift and other equipment as required., • Serve as a backup driver during vacations and other periods of personnel shortages., • Industry and related product knowledge, as well as experience handling compressed gases, preferred., • At least 21 years old., • Willingness to obtain Class A or B CDL along with tanker, Hazmat, & airbrake endorsement., • 1-3 years experience preferred. WORKING CONDITIONS & PHYSICAL REQUIREMENTS • Ability to routinely lift up to 75 lbs., • Ability to read and understand Safety Data Sheets., • Ability to work independently and under some pressure to meet deadlines., • Ability and willingness to occasionally work overtime and on-call during weekends., • Ability and willingness to work outdoors in a wide range of temperatures. BENEFITS • 401(k) Retirement Plan with Company Match, • Health, Dental, and Vision Insurance, • Health Care and Dependent Care Flexible Spending Accounts, • Health Savings Accounts with Annual Company Contribution, • Company Paid Short-Term and Long-Term Disability Insurance, • Company Paid Life and Accidental Death and Dismemberment Insurance, • Voluntary Life, Critical Illness, and Accident Insurance, • New Employee Referral Bonus Program, • Tuition Reimbursement, • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • Wellness Program with Health Insurance Premium Discounts, • Company Paid Uniforms, • Personal Protective Equipment Reimbursements Equal Opportunity Employer. Disabled/Protected Veterans.

Job DescriptionSalary: $35.00-$38.00 About the Company Founded in 1989 and headquartered in Sparrows Point, Maryland, North American Millwright Services (NAMS) is a privately held industrial services and solutions provider with more than 35 years of experience delivering high-quality, precision work. We specialize in fabrication, general contracting, heavy hauling, industrial maintenance, machinery installation, plant relocation, process piping and welding, rigging, and warehousing, supporting complex, mission-critical operations across a wide range of industries. NAMS operates throughout the Chesapeake region, including Delaware, Maryland, Virginia, and West Virginia, and continues to expand our geographic footprint and service capabilities beyond these areas. Our work combines skilled craftsmanship, modern equipment, and a strong safety-first mindset to deliver reliable, efficient results. As we grow, we remain committed to investing in our people, advancing our technical capabilities, and fostering a professional, team-oriented culture where employees can build long-term careers within a stable and expanding organizationNorth American Millwright Services is a well-established and trusted Company looking to expand its Electrical Division to meet the growing needs of our industrial clients along the East Coast, especially MD, WV, and DE. This is your chance to jump start your career with a growing, dynamic team. Check our great benefits package below! Company Website: Benefits • Medical, Dental & Vision Coverage, • Company-Funded Health Reimbursement Arrangement (HRA), • 401(k) Retirement Plan with up to 8% Match, • 100% Company-Paid Life Insurance, • 100% Company-Paid Short-Term Disability, • 100% Company-Paid Long-Term Disability, • Employee Assistance Program (EAP), • Company pick-up truck, • Referral Bonus Program, • Paid Time Off (PTO), • Paid Holidays, • Company Uniforms, • Reimbursement of safety shoes and Rx safety glasses, • Ongoing Professional Training & Development, • Opportunities for Advancement Job Summary Under general supervision, perform skilled work in the installation, maintenance and repair of electrical and electronic systems, wiring, fixtures, apparatus, and control equipment; and perform related work as required. Frequent travel to customer job sites is required. Duties/ Responsibilities: • Fosters the safest possible working environment by adhering to federal (OSHA/MSHA), state, and/or local safety regulations; and all company policies, • Ensures that electrical systems adhere to the national electrical standards and regulations, • Installs electrical systems, • Uses blue prints, wiring diagrams, and manufacturers installation manuals to complete projects, • Completes work orders and recording materials used on the job, • Conducts general electrical systems maintenance and troubleshoots electrical issues with testing equipment, • Identifies electrical problems and repairs them, • Works individually or as part of a team to successfully complete projects, • Projects a professional and respectful demeanor at all times when representing the Company; demonstrates self-control, • Provides guidance, coaching and mentoring to less experienced team members, • Conducts workplace exams prior to each shift; identifies and promptly resolves hazards, • Conducts and documents pre-shift inspections on equipment and hand-tools; immediately reports safety defects identified, • Provides daily project updates including productivity and other relevant project information, • Performs other projects and duties as assigned Required Skills/Abilities: • Working knowledge of Occupational Safety and Health Administration (OSHA); and pertinent electrical codes and regulations, • Customer-focused mindset, • Ability to communicate clearly and effectively, • Troubleshooting skills, • Motivated, self-starter, • Problem-solving skills, • Valid drivers license, • Must have own tools Education/Experience: • Journeyman license preferred; or enrolled in the final year of an apprenticeship program, • Minimum of two years of relevant work experience in anindustrial manufacturing or mining environment, • Solid understanding of manufacturing/mining equipment and electrical systems/high speed production equipment, • Mechanical aptitude Physical Requirements: • Frequently required to walk, sit, stand, balance, stoop, bend, push, pull, lift, reach, kneel, crouch, crawl and climb stairs/ladders and use of hands, • Must have vision, hearing, and ability to talk, • Exposure to hot/cold temperatures, • Must be able to lift up to 50 pounds at times, • Ability to travel independently to multi-state customer job sites; for extended period at times, • Strong manual dexterity and eye to hand coordination, • Ability to identify wires by their distinct colors North American Millwright Services Inc is an equal opportunity employer

Job DescriptionDescription: Capitol Boiler Works, Inc. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, Inc. is a privately held company serving the region since 1936. CBW is currently seeking the right individual to fill a full-time opening for Commercial Welder/Fabricator. We offer a competitive benefits package including: • Medical, • Dental, • Vision, • Life & Disability, • Supplemental Ins., • 401k, • Flexible Spending Account (FSA), • Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: • Lays out, positions, and secures parts and assembles according to specifications, using straight edge, combination square, calipers, and ruler., • Tack-welds or welds components and assembles using electric, gas, arc, or other welding equipment., • Cuts work piece, using powered saws hand shears or chipping knife., • Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form., • Installs or repairs equipment such as lead pipes, valves, floors, and tank linings., • Observes tests on welded surfaces such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications., • Inspects grooves, angles, or gap allowances using a micrometer, caliper, and precision measuring instruments., • Removes rough spots from work piece, using portable grinder, hand file or scraper., • Welds components in flat, vertical, or overhead positions., • Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment., • Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc/, • Analyzes engineering drawing and specifications to play layout, assembly, and welding operations., • Develops templates and other work aids to hold and align parts., • Use safe work habits and operate safety equipment properly., • Determines equipment and welding method, applying knowledge or metallurgy, geometry, and welding techniques., • Examine workpieces for defects., • Measure workpieces with straightedges or templates to meet specifications., • Primarily uses stick welding 60-10 and 70-18. Need to be able to certify in 6G position., • Documents tests and inspection dates and results., • Maintains inventory records for welding supplies used and utilized on jobs., • Use straightedges, combination squares, rulers, and calipers to lay out, position, alight, and secure parts and assemblies prior to assembly., • Operate hand and power tools such as shielded metal arc and gas metal arc welding equipment., • Completes work orders, list materials issued and used, and documents work repairs., • Assists area staff as needed., • Ensures that management is appropriately informed of area activities and of any significant problems., • Ensures regulatory requirements and established procedures are met., • Follows safety requirements., • Ensures that work area is clean, secure, and well maintained., • Completes special projects as assigned. EDUCATION AND EXPERIENCE • High school education/G.E.D., • At least 3 years of experience in welding (Prior certification required). LANGUAGE SKILLS • Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar., • Ability to write complex sentences, using proper punctuation, and using adjectives and adverbs., • Able to communicate in complex sentences, using normal word order with present and past tenses with good vocabulary. QUALIFICATION STANDARDS • Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements., • Ability to meet and maintain all qualitative and/or quantitative productivity standards., • Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements., • Compliance with all personnel policies and practices., • Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices.

Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions...about inspiring stores and irresistible products...about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work. Performs preventive and corrective maintenance on material handling equipment, including daily systems inspections of mechanical equipment to include but not limited to carton conveying equipment, pallet conveying equipment and physical building structures. Works independently on routine tasks, but also works as part of the team on projects designated by the Manager or Supervisor. Perform repairs, preventative maintenance, and changes for Power Industrial truck batteries. Perform other duties as assigned. Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: * Merchandise discounts * Performance-based incentives * Annual merit review * Employee Assistance Program with mental health counseling and legal/financial advice Access the full menu of benefits offerings * Observes and listens to operating machines or equipment to diagnose machine malfunction and determine need for adjustment or repair * Reports any problems to the Manager or Supervisor * Dismantles machine or equipment to examine parts for defect or to remove defective part * Replaces defective part with new part or repairs or reproduces parts * Assembles and test operates machine to verify correction of malfunction. Maintains and lubricates machine tools and equipment * Disassembles, inspects and performs routine repairs and rebuilds of defective parts on all equipment associated with the automated warehouse * Required to install or recharge batteries for any battery-powered material handling equipment * Required to repair and maintain PIT (Powered Industrial Trucks) batteries * Required to perform Preventative Maintenance task for Battery Changers and Facility Sweepers * Adheres to all maintenance safe work practices and maintains a safe working environment at all times * Removes dust, dirt, grease, and waste material from machines, and may paint machines or equipment to prevent corrosion * Performs basic electrical tasks associated with but not limited to replacing motors, fuses, and switches * Operates shop tools such as a grinder, drill press, cutting torch and welding machine to repair or join metal parts * Capable of working under the guidance of other team members * Cleans work area, tools, and equipment. Performs other routine duties * Reports the usage and replacement of equipment and parts * Must possess proficient knowledge and continuous adherence of OSHA, State and Local safety standards and the MLO Safety program standards * Perform any other function management deems essential * Regular, dependable attendance and punctuality * Foster an environment of acceptance and respect that strengthens relationships, and ensures authentic connections with colleagues, customers, and communities * High school diploma or general education degree (GED; with two years of commercial or industrial maintenance related experience and/or training; or equivalent combination of education and experience * Strong verbal and written communication skills * Must communicate with Shuttle office staff, Fleet Maintenance Adm., Receiving dock staff, Big ticket management and carriers and drivers * Adds, subtracts, and multiplies in all units of measure, using whole numbers, decimals and fractions * Must be able to work independently with minimal supervision * Works harmoniously and effectively with others as part of a team * Ability to work a flexible schedule based on department and company needs * This position involves regular walking, standing, sitting, hearing, and talking * May occasionally involve stooping, kneeling, or crouching * May involve close vision, color vision, depth perception, focus adjustment * May involve moving or lifting items up to 25lbs. This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Random drug testing for all colleagues will be conducted on a monthly or semi-monthly basis, depending upon factors including but not limited to the size of the facility and the number of colleagues on roll. Colleagues will be randomly selected for testing by a third party. Testing must be completed on the same workday the colleague is informed of selection for testing, absent extenuating circumstances. In all circumstances, testing must be completed within 24 hours of notification. This job description is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to an inclusive work environment. WAREHOUSE00 This position may be eligible for performance-based incentives/bonuses. Benefits include 401k, medical/vision/dental/life/disability insurance options, PTO accruals, Holidays, and more. Eligibility requirements may apply based on location, job level, classification, and length of employment. Additional benefit details are available at macysJOBS.com.

The Welding/Fabrication & Mechanical Inspector is responsible for the successful execution of Quality Control inspections for manufacturing welding and fabrication processes. This position requires US Citizenship. CWI - Certified Welding Inspector certification required; eligible candidates will have 3-5 years of experience as an Inspector. Duties & Responsibilities • Perform Quality Control inspections of fabricated and welded structures., • The ability to accurately generate inspection reports that capture the inspection results of drawing specifications is imperative., • Assure compliance with applicable AWS quality and welding codes., • May perform Vendor Source Inspections of welded structures., • May perform Receiving, In-Process, Visual and Final Inspection and Testing of machined parts, assemblies, and fabricated product., • Overtime may be required to support manufacturing processes., • Other duties may be assigned. Qualifications, • Education : High School diploma, AA Degree in technical program. Commensurate experience may be substituted., • Current certification in either MT Level II, PT Level II or Certified Welding Inspector. (AWS, ASNT-TC1A), • Candidate must possess a minimum of 3 years of hands on experience performing the following:, • Demonstrated proficiency in welding processes: GMAW, GTAW, FCAW, etc., • Perform in-process oversight inspections per applicable AWS code (joint prep, fit-up, final inspections) and other specifications as specified on engineering drawings., • Perform weld inspections using weld gages., • Assist the Level III Weld Inspector to assure that the welding program is maintained and robust., • Ability to read and interpret complex drawings and specifications, • Experience in the use of common hand gages (micrometers, calipers, thread gages, etc.)., • Experienced working in an ISO9000 Quality System environment., • Experienced in documenting inspection results., • Generation of NCRs and necessary follow-up., • The ability to learn NDT inspection methods and earn certifications as outlined below:, • Complete and pass MT and PT Level II inspection training within 6 months of hire., • Achieve CWI certification within 2 years of hire, • Basic understanding and application of Geometric Dimensioning & Tolerancing IAW ASME Y14.5, • Experienced with the operation of Browne and Sharp DCC CMM utilizing PCDMIS Software, • Proficiency using Laser Tracker and associated control software., • Experienced with the application and use of PCDMIS CMM Software

Job Description: Joining The American Red Cross is like nothing else - it's as much something you feel as something you do. You become a vital part of the world's largest humanitarian network. Joining a team of welcoming individuals who are exceptional, yet unassuming. Diverse, yet uncompromising in unity. You grow your career within a movement that matters, where success is measured in people helped, communities made whole, and individuals equipped to never stop changing lives and situations for the better. When you choose to be a force for good, you'll have mentors who empower your growth along a purposeful career path. You align your life's work with an ongoing mission that's bigger than all of us. As you care for others, you're cared for with competitive compensation and benefits. You join a community that respects who you are away from work as much as what you do while at work. Where Your Career is a Force for Good! WHAT YOU NEED TO KNOW (Job Overview): This position is not eligible for relocation assistance. M-F 7:30 - 4 pm 40hr no mandatory OT There is an on call schedule 1week on call every 5 weeks. Under close supervision, perform repairs and maintenance in plant or office facilities, or on machines and equipment. Typically perform work in one or more of the maintenance trades: carpentry, plumbing, painting, machine and equipment repair, electrical, sheet metal fabrication, and welding. Conduct routine, periodic, or special inspections to determine repair and maintenance work necessary to prevent breakdowns of facilities, machinery, and equipment. Use hand and power tools to test, inspect, troubleshoot, and repair machines and equipment. Use blueprints, sketches, layouts, wiring diagrams, drawings, and specifications. Provide support, development and/or leadership guidance to all volunteers. Perform all duties and responsibilities in compliance with standard operating procedures and other applicable Federal, State and local regulations. WHERE YOUR CAREER IS A FORCE FOR GOOD (Key Responsibilities): 1: Maintain and repair organization's facilities and properties involving routine tasks and responsibilities. Paint structures and equipment as needed. Install and correct minor electrical, plumbing, carpentry, and structural problems. Document installation and repairs as required by regulatory agencies. Operate and service boilers, chillers, motors, fans, pumps and related mechanical equipment. Repair appliances and equipment. 2: May move and store furniture and equipment. 3: Estimate time and material costs of various projects. Requisition new supplies and equipment. 4: May plant and tend flowerbeds. Prune shrubs and trees to enhance growth and appearance. May water lawns, shrubs and flowerbeds. May spray trees, lawns, shrubs and flower beds with fertilizer and insecticides. May rake and remove fallen leaves. May sweep external walkways and staircases. May remove snow using power removal equipment or shovel. Apply snow-melting chemical when necessary on company roads, walkways and outside staircases. May keep drainage ditches and culverts free of obstructions. 5: May drive vehicle to other locations. 6: Perform all work in accordance with established safety procedures. The salary range for this position is (Maryland): $27.12/hr-$28.94/hr Note that American Red Cross salaries are aligned to the specific geographic location in which the work is primarily performed. Other factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role Scope: Continue learning aspects of the job. Work on task-oriented assignments. Contact primarily within immediate work unit. WHAT YOU NEED TO SUCCEED (Minimum Qualifications): Education: High School or equivalent required. May require a trade license. Experience: 1 year of related experience preferred. Related experience includes skill and knowledge of painting, HVAC, carpentry, plumbing, masonry and electrical work. Management Experience: N/A A valid driver's license and clean DMV record. Must have basic writing and communication skills. May be required to have basic computer skills. May have on-call duties. Ability to work on a team. Travel: May drive vehicle to other locations. • Combination of candidate's education and general experience satisfies requirements so long as the total years equate to description's minimum education and general experience years combined (Management experience cannot be substituted). Physical Requirements: Regularly required to use hands to finger, handle or feel, reach with hands and arms and talk or hear. Regularly lift and/or move objects 10-50 lbs frequently; lift and/or move objects that weigh more than 100 lbs with assistance or the use of a powered industrial truck. Frequently required to push carts weighing up to 250 pounds on flat flooring or ramps. Frequently required to stand, walk, stoop, kneel, crouch or crawl. Occasionally required to sit and climb or balance. Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus. Able to move/lift up to 50 lbs unassisted. Ability to use a variety of hand and power tools and work with a variety of chemicals and solvents. Position may require climbing of ladders for top-level selection. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified. WHAT WILL GIVE YOU THE COMPETITIVE EDGE (Preferred ) Strong communication skills General aptitude Willingness to learn Flexibility BENEFITS FOR YOU: As a mission-based organization, we believe our team needs great support to do great work. Our comprehensive package includes: • Medical, Dental Vision plans, • Health Spending Accounts & Flexible Spending Accounts, • PTO: Starting at 15 days a year; based on type of job and tenure, • Holidays: 11 paid holidays comprised of six core holidays and five floating holidays, • 401K with up to 6% match, • Paid Family Leave, • Employee Assistance, • Disability and Insurance: Short + Long Term, • Service Awards and recognition The American Red Cross is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, San Diego Fair Chance Ordinance, the California Fair Chance Act and any other applicable state and local laws. AmeriCorps, the federal agency that brings people together through service, and its partners - the Peace Corps, AmeriCorps Alums, National Peace Corps Association, and the Service Year Alliance - launched Employers of National Service to connect national service alumni with opportunities in the workforce.American Red Cross is proud to be an ___ partner and share our employment opportunities with the network of organizations. Interested in Volunteering? Visit___ to learn more, including our most-needed volunteer positions. To view the EEOC Summary of Rights, click here: ___

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical assembly and fabrication, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical assembly and fabrication, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job DescriptionMillwright Foreman responsible for and supervising rigging, lifting, installation and/or removal of rotating machinery IN THE FIELD in an industrial environment. This can also include erection of steel platforms, ladders, and stairs. Start: ASAPPay: $35-$37 DOEDuration: 4+ monthsNo per diem, local only Primary Responsibilities:Proficient in basic rigging techniques, and knowledge of slings, chain falls, come-a-longs, and hoists. Proficient in basic equipment installation, to include anchoring and straight edge alignment of mechanical components. Experienced in the erection of multi-level structures consisting of beam and column bolted and/or welded construction. Requirements:Must pass 10-panel drug screening. Strong mechanical knowledge. 2-5 years of previous experience in millwrighting, preferably in and industrial environment, with an additional 2-4 years in a supervisory role. Familiarity of ASME codes and standards, as well as familiarity with SMAW, GTAW and FCAW welding processes. Flexibility to work in both clean (food-grade) and dirty (recycling facilities) environments. Reliable transportation with active driver’s license.

Job DescriptionDescription: POSITION TITLE: Fabricator TEAM: Manufacturing REPORTS TO: Fabrication Team Lead FLSA CLASSIFICATION: Hourly, Non-exempt LOCATION: Headquarters (On-Site) ABOUT US At the heart of Gable lies a passion that transcends the conventional. We’re more than just creators of visual communications; we’re experts at creating experiences. We believe that every brand, building, and place has a unique story to tell, and our mission is to elevate the way they are seen, experienced, and remembered. We are committed to fostering a collaborative and inclusive work environment where team members can thrive and contribute to our shared success. POSITION OVERVIEW The Fabricator is responsible for producing high-quality metal components, frames, and related signage assemblies in support of Gable’s manufacturing operations. This role works from shop drawings, work orders, and team direction to cut, weld, assemble, repair, and prepare fabricated elements used in custom signage and branded environment projects. This position plays a direct role in meeting production schedules, quality standards, and labor expectations. The Fabricator is expected to perform work safely, accurately, and efficiently while maintaining a clean and organized work area, identifying issues early, and coordinating with the Fabrication Team Lead and other production team members as needed. KEY RESPONSIBILITIESFabrication and Production • Review work orders, shop drawings, prints, and instructions to plan fabrication steps, material needs, and tool requirements., • Fabricate signage components and related metal assemblies by cutting, grinding, fitting, burning, and welding various metals., • Perform MIG welding, brazing, and metal cutting using gas and electric welding equipment., • Clean and prepare surfaces for welding, then set up, align, assemble, and tack components for final fabrication., • Repair fabricated components and metal signage as needed using appropriate welding and fabrication techniques., • Build up worn or defective surfaces and complete rework as required to meet production and quality standards., • Cut up or dismantle obsolete signage and scrap materials when directed., • Support downstream production needs by preparing completed fabricated parts for handoff, staging, or next-step processing. Quality and Operational Execution, • Produce work that meets dimensional, fit, finish, and weld quality requirements., • Inspect completed work before release to the next stage of production to verify accuracy and completeness., • Use labor, materials, tools, and equipment responsibly to complete work within expected timeframes., • Help minimize scrap, rework, and material waste through careful workmanship and attention to detail., • Identify and communicate drawing discrepancies, missing information, material shortages, or production issues promptly., • Assist with moving, staging, loading, unloading, and storing materials as needed to support shop workflow., • Maintain clear communication with the Fabrication Team Lead and other production team members regarding job status and support needs. Safety, Equipment, and Housekeeping, • Maintain a clean, safe, organized, and disciplined work area at all times., • Operate tools, welding equipment, and shop machinery safely and in accordance with company procedures., • Perform routine care and basic upkeep of tools and fabrication equipment and report maintenance issues promptly., • Follow all applicable OSHA, MOSH, and company safety requirements., • Use required PPE and follow established safe work practices for welding, cutting, lifting, and material handling., • Perform other work-related duties as assigned within the normal scope of the role. QUALIFICATIONS, • High school diploma or equivalent preferred., • One to three years of metal fabrication, welding, or related manufacturing experience preferred., • Working knowledge of MIG welding, brazing, grinding, cutting, and general metal fabrication techniques., • Ability to read and follow shop drawings, fabrication prints, work orders, and written or verbal instructions., • Ability to use tape measures, squares, levels, and other common measuring tools accurately., • Ability to safely operate common fabrication tools and equipment, including welding equipment, grinders, saws, drills, and other shop tools., • Experience working with aluminum, steel, and other fabrication materials preferred., • Basic written and verbal communication skills., • Strong attention to detail, workmanship, safety, and production quality. The role requires manual dexterity to safely operate welding equipment, hand tools, power tools, and shop machinery. The team member must also have visual acuity, with or without correction, sufficient to read prints, measure accurately, inspect work quality, and perform detailed fabrication tasks safely. The Fabricator must be able to work around metal materials, sharp edges, sparks, heat, fumes, dust, and shop noise while consistently following required safety practices and PPE requirements. WORK ENVIRONMENT • This role is primarily based in a manufacturing and fabrication environment. The team member will regularly work around welding equipment, metal materials, moving machinery, industrial tools, dust, fumes, and elevated noise levels. All prospective team members must pass a criminal background check and drug test. Candidates must also meet the requirements for an I-9, e-Verify.

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical assembly and fabrication, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical assembly and fabrication, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical fabrication and assembly, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical fabrication and assembly, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description Why do you want to work as a Trailer Mechanic with QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: • Weekly Competitive Pay - Pay is $25 - $28 /hour depending on experience and location, • Tool/Boot Reimbursement Program, • Referral Program, • Sign on Bonuses, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, Flexible Spending Accounts, • Generous Paid Time Off/ Holiday Schedule, • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Able to identify parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems., • High school diploma, completion of G.E.D., or equivalent vocational school preferred, but not required. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity.

Job Description Synagro partners with stakeholders to clean our water, protect our environment and serve our communities by generating worth from what others consider waste. We work to protect the health of our water, our Earth and those who depend on them now and in the future. What good is a job without great benefits to reward your hard work? Here are some highlights of what Synagro has to offer: • 15 days paid time off, • 10 Holidays, • Medical/Dental/Vision (within 30 days of hire), • Health Saving Account (HSA) with company match, • Flexible Spending Account (FSA), • 401(k) with company match (fully vested upon hire), • Career growth and promotional opportunities * $3,000 New Hire Payment * ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES 1. Apply to all regulations that provide safe, reliable, and cost effective operation of the plant to meet processing, permit, and other applicable requirements, 2. Perform preventative, corrective and emergency mechanical maintenance on all equipment throughout the plant under the direction of the Plant Manager such as welding, piping and refurbish equipment., 3. Identify, troubleshoot and repair mechanical malfunctions throughout the plant which includes documenting problem and resolution as well as reporting all problems and resolutions of mechanical malfunctions to the Plant Manager, 4. Perform fire guard duty as well as confined space watch, 5. Participate and complete training programs within the time frame allotted, 6. Perform any general work or other assignments necessary to ensure the safe, clean, and efficient operation of the facility to include sweeping, shoveling, and other housekeeping activities, 7. Maintain work tools and ensure work tools are put in appropriate secure place after using, 8. Demonstrate safe behaviors at all times and to perform their job in a safe manner KNOWLEDGE/SKILLS/ABILITIES 1. Ability to weld, fit pipe, refurbish equipment, set and align rotating equipment in addition to cutting and rigging techniques, 2. Ability to wire and unwire motors and perform zero energy check with a multi meter, 3. Ability to recognize operational inconsistencies and hazards in the workplace and display proper judgment in responding to them, 4. Ability to operate powered equipment and tools in a safe and efficient manner while on ground surface as well as at heights, 5. Ability to work in a safe manner, recognizing occupational hazards, and thorough knowledge and understanding of plant fire protection apparatus and systems and ability to operate all fire protection equipment, 6. Able to work varying shifts, overtime, holidays, on call duty and emergency call-ins, 7. Communication skills – verbal and written, 8. Ability to operate a computer EDUCATION/EXPERIENCES 1. Minimum High School Diploma or equivalent (GED), 2. Mechanical experience with heavy trucks, trailers, equipment, pipe fitting and rebuilding equipment, 3. Experience with computerized maintenance programs (FIXX) or similar PM system preferred WORKING CONDITIONS/PHYSICAL REQUIREMENTS 1. Talking, Hearing, Seeing, Sitting, Standing, Walking, Fingering, Feeling, Grasping, Climbing, and Lifting up to 100lbs, 2. The worker is subject to inside environmental conditions: Protected from weather conditions but not necessarily from temperature changes., 3. The worker is subject to noise: There is sufficient noise to cause worker to shout in order to be heard above the ambient noise level., 4. The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to bio-solids., 5. The worker is subject to vibration: Exposure to oscillating movements of extremities or whole body., 6. The workers frequently is in close quarters, crawl space, shafts, manholes, small, enclosed rooms, small sewage and water line pipes, and other areas which could cause claustrophobia. Salary Range: $27.00 - $37.00 per hour (commensurate with experience) The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be an exhaustive list of all essential job functions, knowledge, skills, abilities, efforts, and physical or working conditions associated with a position. AA/EOE/M/F/D/V We thank all individuals for their interest in Synagro however only those selected for interviews will be contacted.

At Arbon Equipment, a Rite-Hite Company, your work makes an impact. We deliver industry-leading solutions that keep workplaces safe, productive, and efficient. When you join Arbon Equipment, you're not just selling or servicing equipment - you're building trusted partnerships with customers and growing your career with a company backed by the strength of Rite-Hite's global innovation. Rite-HiteService Technicianswill install, maintain, and repair loading dock equipment and industrial doors at customer facilities. In addition, Service Technicians act as a technical resource for our customers and our sales force. This position works independently or in small teams in a field service environment, and is a primary customer contact. Rite-Hitesells the best and we hire the best. This position requires experience welding and working with mechanical, hydraulic, and electrical systems. Prior experience in the repair or installation of industrial equipment is preferred. Selected candidate must be able to work independently in a field environment. Good customer service skills are required. This position requires the ability to work outdoors, at heights, and lift up to 100 pounds. As this position requires driving a company vehicle, a pre-employment drug test and clean driving record are required, as is a DOT physical. What We Offer At Arbon Equipment - A Rite-Hite Company, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work: * Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more. * Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing. * Time for You: Paid holidays, vacation time, and personal/sick days each year. Join us and build a career where you're supported - at work and beyond. Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law. In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans. We are also committed to maintaining a drug-free workplace for the safety of our employees and customers. The hiring range for this position in MD-Elkridge is $25.70-$35.30 per hour based on a 40-hour work week. The number of hours scheduled per week may vary based on business needs. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus opportunity may be provided as part of the compensation package, in addition to the full range of benefits including medical, dental, life, and vision insurance, disability, a 401(k) plan, profit sharing, and PTO/vacation.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: • Work in an entrepreneurial and dynamic environment with a chance to make an impact., • Develop lasting relationships with great people., • Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Sr. Maintenance Technician The Sr. Maintenance Technician ensures equipment uptime through timely, in-depth troubleshooting and repair of all equipment failures. The Sr. Maintenance Technician shares knowledge of all production equipment to maintenance team and Operators. The Sr. Maintenance Technician acts as a subject matter expert on behalf of the plant in at least one of the following equipment areas: injection molders, blow molders, fillers/cappers, labelers, case packers, conveyors, palletizers and/or stretch wrappers. The Sr. Maintenance Technician performs troubleshooting and repair of facilities and auxiliary equipment such as chillers, air compressors, Reverse Osmosis, other water filtration equipment and general maintenance of the plant. Sr. Maintenance Technician works directly with Maintenance Technicians, machine Operators, Supervisors, and Managers to resolve mechanical issues. The Sr. Maintenance Technician develops and implements best practices aligned with Niagara's maintenance strategies. Through the use of preventative and predictive maintenance processes, the Sr. Maintenance Technician champions continuous improvement efforts and assists with training in their designated focus areas. Essential Functions • Adhere to and enforce highest standards in safety and good manufacturing practices plant-wide, • Train and lead Operators, Mechanics and Supervisors on technical procedures related to high-speed bottle manufacturing and packaging, • Work directly with plant leadership to develop and execute projects involving continuous improvement, upgrades, and the resolution of re-occurring problems, • Rapid identification of machine problems to minimize equipment downtime with root cause analysis conducted to prevent re-occurrence, • Partner with other Sr. Maintenance Technician to resolve cross-functional problems, • Use of available software systems to analyze and identify issues to drive throughput performance, • Define requirements and lead overhaul efforts to rebuild equipment to like-new status during planned downtime, • Transfer knowledge to Niagara team members to develop operating and troubleshooting, • procedures in the following areas of bottling production specialization:, • Blow molding, inclusive of PET processing, machine set-up, mold changes, and quality inspection systems, • Filling/capping, beverage processing methods, cap feeding systems with light closures, vision inspections systems and laser date coders, quality/sanitation standards, and conveying systems, • Labeling technology, roll-fed and/or cut and stack, machine set-up, hot melt gluing systems, and conveying systems, • Dry-end packaging including case packers, case conveyors, conventional and robotic palletizers, and stretch wrappers., • Machine set-up required for all pack size changes, • Common OEM's for production equipment: Krones, Sidel, KHS, Sacmi, Tech Long, • Transfer knowledge to Niagara team members to develop operating and troubleshooting procedures in the following areas of injection technology:, • Husky injection molding machines consisting of hydraulic, pneumatic, and electromechanical systems, • Auxiliary systems including resin handling/blending, resin drying, dehumidification, vision inspection, conveying, and cooling systems, • Mold systems, internal hot runner and cold half maintenance, identification of component wear and troubleshooting through detailed inspection of produced products, • Plastic processing at high speeds while maintaining tight part tolerances and acceptable levels of acetaldehyde (AA), • Create SOP's for troubleshooting machines, and upload them to BDA system; responsibility for machine reliability and meantime before failure, • Regular and predictable attendance, as well as required on-call availability, are essential functions of the job to ensure equipment and facility up-time, • Ability to stand or walk for extended periods of time in a manufacturing environment. Ability to lift up to 50 lbs., • Will need own toolbox and basic tools., • Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without prior notice. Qualifications • Minimum Qualifications:, • 6 Years - Experience in a maintenance manufacturing environment, • 6 Years - Experience in Position, • Demonstrated ability to communicate effectively and resolve issues across multiple departments and levels of the organization, • Experience with Microsoft Word, Excel, and Outlook, • Effective communication of issues and solutions to cross-functional team members, • Ability to read and interpret schematics: electrical, hydraulic, and pneumatic, • Skilled in the use of shop equipment such as hydraulic and mechanical presses, bench grinder, drill press, mill and lathe, and assorted power tools, • Proficient skills with precision measuring equipment, such as calipers, dial indicators, bore gauges, and depth gauges, • Willingness to be a technical leader and trainer within a specific area of plant or machine center, • Preferred Qualifications:, • 10+ Years- Experience in a maintenance manufacturing environment, • 10+ Years - Experience working in Position, • 4 years of experience in one of the following fields: blow molding, injection molding,, • packaging, or beverage, • 4 years of experience with Krones, Husky, Sidel, or other packaging or bottling equipment, • 1 year of experience leading and developing others on the functionality and repair of equipment, • 2 years of experience creating process improvements or continuous improvement initiatives, • Skilled in fabrication capabilities such as cutting and welding (mig, tig or stick), • Skilled working with electrical systems including 480VAC & 24VDC power, • Ability to read and interpret schematics for process and instrumentation diagrams, • Skilled in the repair of variable frequency drives, servo motors and controllers, communication systems (asi-bus, can-bus, profi-bus, ethernet), PLC input/output cards, and safety modules Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: • Lead Like an Owner, • Makes safety the number one priority, • Keeps alert for safety issues and escalates immediately, • Effectively prioritizes tasks based on department goals, • Shows respect to others and confronts interpersonal issues directly, • Prioritizes resolution of customer issues effectively, • Responds promptly and honors commitments to internal and external customers, • InnovACT, • Makes recommendations to continuously improve policies, methods, procedures, and/or products, • Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances, • Increases performance through greater efficiency, • Find a Way, • Seeks to develop technical knowledge through learning from other experts, • Understands interdepartmental impact of individual decisions and actions, • Seeks solutions rather than placing blame, • Empowered to be Great, • Consistently looks for ways to improve one's self through growth and development opportunities, • Communicates clearly and promptly up, down, and across, • Communicates effectively to manage expectations Education • Minimum Required:, • High School Diploma or GED, • Preferred:, • Associate's Degree in manufacturing, manufacturing technology, mechatronics, industrial manufacturing, manufacturing automation or other similar manufacturing-related specialization Certification/License: • Required: N/A, • Preferred: N/A Foreign Language • Required: None Required, • Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly $37.18 - $52.98 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. • Paid Time Off for holidays, sick time, and vacation time, • Paid parental and caregiver leaves, • Medical, including virtual care options, • Dental, • Vision, • 401(k) with company match, • Health Savings Account with company match, • Flexible Spending Accounts, • Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members, • Family Building Benefits including enhanced fertilitybenefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements, • Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan, • Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc., • Tuition reimbursement, college savings plan and scholarship opportunities, • And more! Any employment agency, person or entity that submits a resume into this career site or to a hiring manager does so with the understanding that the applicant's resume will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit resume to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit resume into this career site to be eligible for placement fees. Niagara Plant Name BALTIMORE

At Arbon Equipment, a Rite-Hite Company, your work makes an impact. We deliver industry-leading solutions that keep workplaces safe, productive, and efficient. When you join Arbon Equipment, you're not just selling or servicing equipment - you're building trusted partnerships with customers and growing your career with a company backed by the strength of Rite-Hite's global innovation. Being a Service Technician holds a sense of integrity and independence. You are the face of the organization with our customers as you maintain Rite-Hite products in Elkridge and surrounding areas within Maryland from a service truck which you can house at your residence. The opportunity from our Elkridge, MD, office offers a career for you to grow your skillset and make a daily impact! Description: Rite-HiteService Technicianswill install, maintain, and repair loading dock equipment and industrial doors at customer facilities. In addition, Service Technicians act as a technical resource for our customers and our sales force. This position works independently or in small teams in a field service environment, and is a primary customer contact. Rite-Hitesells the best and we hire the best. This position requires experience welding and working with mechanical, hydraulic, and electrical systems. Prior experience in the repair or installation of industrial equipment is preferred. Selected candidate must be able to work independently in a field environment. Good customer service skills are required. This position requires the ability to work outdoors, at heights, and lift up to 100 pounds. As this position requires driving a company vehicle, a pre-employment drug test and clean driving record are required, as is a DOT physical. What We Offer At Arbon Equipment - A Rite-Hite Company, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work: * Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more. * Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing. * Time for You: Paid holidays, vacation time, and personal/sick days each year. Join us and build a career where you're supported - at work and beyond. Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law. In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans. We are also committed to maintaining a drug-free workplace for the safety of our employees and customers. The hiring range for this position in MD-Elkridge is $25.70-$35.30 per hour based on a 40-hour work week. The number of hours scheduled per week may vary based on business needs. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors. A bonus opportunity may be provided as part of the compensation package, in addition to the full range of benefits including medical, dental, life, and vision insurance, disability, a 401(k) plan, profit sharing, and PTO/vacation.

Job DescriptionSalary: $28.00-$35.00 About the Company Founded in 1989 and headquartered in Sparrows Point, Maryland, North American Millwright Services (NAMS) is a privately held industrial services and solutions provider with more than 35 years of experience delivering high-quality, precision work. We specialize in fabrication, general contracting, heavy hauling, industrial maintenance, machinery installation, plant relocation, process piping and welding, rigging, and warehousing, supporting complex, mission-critical operations across a wide range of industries. NAMS operates throughout the Chesapeake region, including Delaware, Maryland, Virginia, and West Virginia, and continues to expand our geographic footprint and service capabilities beyond these areas. Our work combines skilled craftsmanship, modern equipment, and a strong safety-first mindset to deliver reliable, efficient results. As we grow, we remain committed to investing in our people, advancing our technical capabilities, and fostering a professional, team-oriented culture where employees can build long-term careers within a stable and expanding organization. Company Website: Benefits • Medical, Dental & Vision Coverage, • Company-Funded Health Reimbursement Arrangement (HRA), • 401(k) Retirement Plan with up to 8% Match, • 100% Company-Paid Life Insurance, • 100% Company-Paid Short-Term Disability, • 100% Company-Paid Long-Term Disability, • Employee Assistance Program (EAP), • Company pick-up truck, • Referral Bonus Program, • Paid Time Off (PTO), • Paid Holidays, • Company Uniforms, • Reimbursement of safety shoes and Rx safety glasses, • Ongoing Professional Training & Development, • Opportunities for Advancement Essential Duties/ Responsibilities: • Collaborates with the Director of Safety and operations leadership to develop, prepare, and implement safety/health policies and procedures, • Develops a strong working relationship that promote a culture of safety and teamwork, • Conducts on-going employee training for new hires and existing employees such as hazard recognition and resolution, tool talks, job hazard analysis, company policies, and MSHA new miner and annual refresher training, • Ensures compliance with federal, state, and local safety laws, regulations, codes, and rules including PPE requirements, • Conducts safety inspections/workplace exams to identify and resolve hazards in the workplace using the Companys safety app, • Conducts quarterly audits of Company facilities; reports and tracks any issues identified through resolution, • Promptly stops operations and activities when an imminent danger exists w/ potential to harm employees or equipment, • Participates in project planning to assess safety requirements and/or training gaps; makes recommendations to improve safety throughout duration of project or assignment, • Engages with workforce including customer safety teams as needed to foster and promote a culture of safety, • Provides on the job training related to all aspects of safety including safety related apps and other safety initiatives and/or priorities, • Ensures completion of required MSHA and OSHA recordkeeping and reporting, • Ensures timely completion of accident reporting and post-accident investigations, including near misses and property damages; identifies root causes and recommends corrective actions, • Enforces the drug & alcohol procedures related to random, post-accident and/or reasonable suspicion, • Analyzes trends to identify opportunities to minimize workplace injuries, accidents, and health problems, • Develops and tracks metrics related to occupational accidents and injuries, • Maintains accurate record keeping of all training conducted; ensures training gaps are identified and resolved promptly, • Coordinates with HR on potential employee-related safety concerns including accidents, investigations, injuries, property damage, workers compensation, coaching and/or disciplinary action;, • Maintains inventory of safety supplies, • Documents all safety equipment issued to employees including replacements; tracks and communicates excessive usage, • Provides after-hours support as needed including weekends and evenings, • Provides technical and administrative support as needed; keeps current on latest technology, tools, and trends, • Performs other projects and duties as assigned Required Skills/Abilities: • Strong working knowledge of Occupational Safety and Health Administration (OSHA) and Mine Safety Health Administration (MSHA) regulations and standards; DOT knowledge a plus, • Excellent written and verbal communication skills, • Public speaking ability to conduct effective training, • Excellent organizational skills and attention to detail, • Strong leadership and mentoring skills, • Excellent interpersonal skills, • Fosters environment of teamwork, collaboration and trust, • Proficient with Microsoft Office Suite or related software, • Valid drivers license Education/Experience: • Bachelors degree in relevant field preferred and/or equivalent work experience in manufacturing, mining and/or industrial maintenance, • At least two years of occupational health and safety experience in an industrial environment required, • Professional safety certification and/or MSHA Instructor certification a plus, or working toward one Physical Requirements: • Working primarily in the field at job sites (80-90%) with exposure to hot/cold temperatures, • Frequently required to walk, sit, stand, balance, stoop, bend, push, pull, lift, reach, kneel, crouch, crawl and climb stairs/ladders and use of hands, • Must have vision, hearing, and ability to talk, • Must be able to lift 50 pounds, • Ability to travel independently to multi-state facilities including customer job sites NAMS is an equal opportunity employer

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Opportunity for advancement This is a full-time on-site role for a Technician at Chesapeake Cooling Solutions LLC located in Glen Burnie, MD. The Technician will be responsible for but not limited to day-to-day tasks related to the maintenance and repair of cooling systems, troubleshooting technical issues, and providing support for installation projects. This position is responsible for a series of operations to correctly disassemble, clean, assemble, and test engine cooling system components. Qualifications Experience with the service and application of radiators, condensers, oil coolers, inter-coolers, heat exchangers, welding fabrication, aftertreatment systems and cooling systems (marine, agricultural, off/on highway, rail/industrial engines, critical power) preferred but not required. Technical knowledge in identification of mechanical components in cooling systems. Ability to diagnose and repair technical issues efficiently. Strong problem-solving skills and attention to detail in a fast-paced environment. Forklift Certification and DOT Medical card is a plus. Ability to measure and accurately document work performed and parts used. Requirements Valid Drivers license and reliable transportation. Basic reading, writing and arithmetic skills required. Ability to lift up to 50 lbs. Self-starter and motivated to be successful in a team environment. This job involves a significant amount of physical activity, requiring good leg and back strength to sustain standing and bending postures for extended periods of time.

Outside Sales Representative (Territory Manager).Outside Sales Representative (Territory Manager) Location: Baltimore, MD Linde Gas & Equipment Inc.Outside Sales Representative to generate and pursue leads, build and maintain strong customer relationships, and promote and sell welding & industrial g

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: • Work in an entrepreneurial and dynamic environment with a chance to make an impact., • Develop lasting relationships with great people., • Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Maintenance Technician The Maintenance Technician is responsible for ensuring equipment uptime through timely, in-depth troubleshooting and repair. The Maintenance Technician performs troubleshooting and repair of all production equipment including injection molders, blow molders, fillers/cappers, labelers, case packers, conveyors, palletizers, and stretch wrappers. The Maintenance Technician also performs troubleshooting and repair of facilities and auxiliary equipment, such as chillers, air compressors, Reverse Osmosis, other water filtration equipment and general maintenance of the plant. The Maintenance Technician works directly with machine Operators, Supervisors, Preventative Maintenance Mechanics and Sr. Maintenance Technicians to resolve mechanical issues that arise during shift. The Maintenance Technician proposes solutions to complex and reoccurring problems on production equipment to Sr. Mechanics and Management to resolve issues. Essential Functions • Troubleshoot mechanical, electrical, pneumatic, and hydraulic systems using schematics, technical drawings and testing equipment • Repair equipment, fixtures, systems, conveyors, and other equipment at facility, • Modify, lubricate, diagnose, and operate equipment in accordance with Niagara's defined processes, • Maintain industrial control systems, • Work independently and with other team members to complete repairs in a safe and timely manner, • May fill in for production operator as needed, • Create and report repairs throughout shift. Complete required work order paperwork, document parts and material usage • Understand and follow plant safety rules including safe lifting practices and safe machine operation. Personal Protective Equipment is to be used where required • Regular and predictable attendance is an essential function of the job to ensure equipment and facility uptime • Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice Qualifications • Minimum Qualifications:, • 4 Years - Experience in Field or similar maintenance environment, • 4 Years - Experience in Position, • Demonstrated ability to communicate effectively and resolve issues across multiple departments, • Basic experience with Microsoft Word, Excel and Outlook, • Effective communication of issues and solutions to cross-functional team members, • Ability to read and interpret schematics: electrical, hydraulic, and pneumatic, • Skilled in the use of shop equipment such as hydraulic and mechanical presses, bench grinder, drill press, mill and lathe, and assorted power tools, • Proficient skills with precision measuring equipment, such as calipers, dial indicators, bore gauges, and depth gauges, • Willingness to be a technical leader and trainer within a specific area of plant or machine center, • Will need own toolbox and basic tools, • Preferred Qualifications:, • 6 Years- Experience in Field or similar manufacturing environment, • 6 Years - Experience working in Position, • Experience in high-speed manufacturing, bottling, beverage, packaging, or plastics industries, • Experience with the following technologies:, • Variable frequency drive (VFD), servo drives, and servo motor, • Rotary equipment such as rotary press or filler, • Thermodynamics, heat transfer, or plastics processing, • Krones, Sidel, or Husky equipment, • HVAC including chillers and/or air compressors, • Experience working with electrical, hydraulic and pneumatic schematics for troubleshooting, • Skilled in fabrication capabilities such as cutting and welding (mig, tig or stick), • Skilled working with electrical systems including 480VAC & 24VDC power, • Ability to read and interpret schematics for process and instrumentation diagrams, • Skilled in the repair of variable frequency drives, servo motors and controllers, communication systems (asi-bus, can-bus, profi-bus, ethernet), PLC input/output cards, and safety modules Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: • Lead Like an Owner, • Makes safety the number one priority, • Keeps alert for safety issues and escalates immediately, • Effectively prioritizes tasks based on department goals, • Shows respect to others and confronts interpersonal issues directly, • Prioritizes resolution of customer issues effectively, • Responds promptly and honors commitments to internal and external customers, • InnovACT, • Makes recommendations to continuously improve policies, methods, procedures, and/or products, • Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances, • Increases performance through greater efficiency, • Find a Way, • Seeks to develop technical knowledge through learning from other experts, • Understands interdepartmental impact of individual decisions and actions, • Seeks solutions rather than placing blame, • Empowered to be Great, • Consistently looks for ways to improve one's self through growth and development opportunities, • Communicates clearly and promptly up, down, and across, • Minimum Required:, • High School Diploma, • Preferred:, • Associate's Degree in manufacturing, manufacturing technology, mechatronics, industrial manufacturing, manufacturing automation or other similar manufacturing-related specialization Certification/License: • Required: N/A, • Preferred: N/A Foreign Language • Required: None Required, • Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly $30.35 - $44.01 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. • Paid Time Off for holidays, sick time, and vacation time, • Paid parental and caregiver leaves, • Medical, including virtual care options, • Dental, • Vision, • 401(k) with company match, • Health Savings Account with company match, • Flexible Spending Accounts, • Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members, • Family Building Benefits including enhanced fertilitybenefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements, • Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan, • Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc., • Tuition reimbursement, college savings plan and scholarship opportunities, • And more! Any employment agency, person or entity that submits a resume into this career site or to a hiring manager does so with the understanding that the applicant's resume will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit resume to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit resume into this career site to be eligible for placement fees. Niagara Plant Name BALTIMORE

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical assembly and fabrication, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical assembly and fabrication, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job DescriptionDescription: Capitol Boiler Works, Inc. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, Inc. is a privately held company serving the region since 1936.CBW is currently seeking the right individual to fill a full-time opening for Commercial HVAC Technician. We offer a competitive benefits package including: • Medical, • Dental, • Vision, • Life & Disability, • Supplemental Ins., • 401k, • Flexible Spending Account (FSA), • Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: • Installs, connects, and adjusts thermostats, humidistats, and timers, using hand tools., • Repairs or replaces defective equipment, components, or wiring., • Joins pipes or tubing to equipment and to fuel, water, or refrigerant source, to form complete circuit., • Fabricates, assembles, and installs ductwork and chassis parts, using portable metal-working tools and welding equipment., • Tests electrical circuits and components for continuity, using electrical test equipment., • Disassembles system and cleans and oils parts., • Assembles, positions, and mounts heating or cooling equipment, following blueprints., • Tests pipe or tubing joints and connections for leaks, using pressure gauge or soap-and-water solution., • Installs auxiliary components to heating-cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues, and stokers, following blueprints., • Adjusts system controls to setting recommended by manufacturer to balance system, using hand tools., • Inspects and tests system to verify system compliance with plans and specifications and to detect malfunctions., • Discusses heating-cooling system malfunctions with users to isolate problems or to verify malfunctions have been corrected., • Repairs & Troubleshooting to Chillers, Cooling Towers, RTUs, • Inspects inoperative equipment to locate source of trouble., • Studies blueprints to determine configuration of heating or cooling equipment components., • Lays out and connects electrical wiring between controls and equipment according to wiring diagram, using electrician's hand tools., • Reassembles equipment and starts unit to test operation., • Measures, cuts, threads, and bends pipe or tubing, using pipefitter's tools. EDUCATION AND EXPERIENCE • High school education/G.E.D. with schooling in trade industry., • Universal CFC certification required., • At least 4 years of experience in the HVAC industry., • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions and deal with problems involving machines and tools, including their designs, uses, benefits, repair, and maintenance. LANGUAGE SKILLS • Ability to read and comprehend instructions, short correspondence, and memos., • Ability to effectively present information in a one-on-one setting to members of management and fellow employees., • Ability to write legibly for form completion. QUALIFICATION STANDARDS • Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements., • Ability to meet and maintain all qualitative and/or quantitative productivity standards., • Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements., • Compliance with all personnel policies and practices., • Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices.

Job DescriptionDescription: The Welder/PipeFitter is responsible for the installation and repair of industrial Boilers and Compressed Air Systems. Requirements: ATTEND REQUIRE VENDOR TRAINING AND COMPANY SPONSORED CLASSES MAINTAIN TRUCK STOCK INVENTORY- REPAIR PARTS, RELATED RECORDS CONCERNING TIME, LABOR, MATERIAL LOGS OF TASKS PERFORMED, AND MAINTAIN INTERIOR AND EXTERIOR VEHICLE CLEANLINESS PREPARE SERVICE TICKETS FOR ALL WORK PERFORMED ASSIST INSIDE SALES OR SALES BY IDENTIFYING AND REPORTING SALES LEADS, TRAINING LESS EXPERIENCED PERSONNEL DRIVE IN A MANNER THAT ADHERES TO TATE’S FLEET SAFETY PROGRAM JOINS, FABRICATES, AND REPAIRS METAL AND OTHER WIELDABLE MATERIAL, AND ANCILLARY EQUIPMENT BY APPLYING APPROPRIATE WELDING TECHNIQUES ENSURES PROPER FUNCTION AND SAFE OPERATION OF THE EQUIPMENT BY RECOMMENDING WELDING TECHNIQUE, ARRANGEMENT, AND ASSEMBLY OF PRODUCT THROUGH ANALYZING ENGINEERING DRAWINGS AND SPECIFICATIONS. UTILIZE MIG/TIG STICK WELDING TECHNIQUES AS WELL AS BRAZING AND SOLDERING, PIPEFITTING, RIGGING AND OTHER MECHANICAL TECHNIQUES.

Job Description This is a 10-hour day shift Monday-Thursday with occasional Friday overtime. Manufacturing company in Joppa, MD looking for people with hands-on skills in the following areas: mechanical assembly and fabrication, welding, industrial machine wiring, and/or industrial plumbing. We are looking for people to join our production team to build state of the art automated machinery. Benefits, vacation, 401K, company picnics, overtime opportunities, great working environment, and a brand new building! Requirements • Live within a 45 minute commute of Joppa, MD, • Have on-the-job experience in mechanical assembly and fabrication, • Have on-the-job experience in MIG welding, • Have on-the-job experience in TIG welding, • Have hands-on experience in industrial wiring, • 4-day workweek (4x10 hour shifts), • 401(k) w/ matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance