Trabajos 3rd shift en Naperville, IllinoisCrear alertas

Job DescriptionDescription: Power Play Distributors is a DSD (Direct Store Delivery) company based in Bolingbrook, IL that is responsible for the distribution of premium frozen pizza products throughout the Midwestern states. The Dock Worker responsibility to pick and stage in and outbound product orders; load and move material on and off trucks. Functions: • Daily inspection of forklifts and check of trailer safety, • Work from verbal orders and written production sheets, • Update orders placed by Sales Reps, • Load and unload trailers, • Pick and palletize RSR orders., • Maintain product flow in and out of the freezer, • Perform daily housekeeping of dock area, including but not limited to sweeping dock area and emptying garbage, • Use forklift, hand pallet jacks, hand carts, computer, trailer refer equipment, and common office supplies, • Follow safety rules and keep work area in a clean and orderly condition, • Moving route trucks in yard when required, • Incumbent must also be able to stand and move around the work area, • Forklift operation may involve periods of prolonged sitting., • Requires bending, squatting, climbing, reaching to gather and move picked items., • Must be able to regularly lift and carry, up to 25lbs, • Must be able to push/pull pallet jack loaded with material weighing up to 1400lbs., • Full-time/non-exempt position - Hourly pay rate, eligible for overtime, • Insurance - Health, Dental Vision, • Company sponsored life Insurance, short-term and long-term disability, • Flexible Spending account (FSA), • 401K matching, • Holiday pay, • Bereavement pay, • Employee assistance programRequirements:, • Current forklift certification required, • High School diploma or GED preferred, • Basic math skills, • Ability to comply with instructions and prescribed routines, methods, or procedures, • Ability to exercise judgment of making minor decisions

Job Description Description: ESSENDANT Inc. is an inclusive team environment that values the contributions of its associates through a great culture, competitive pay, and generous benefits. Job Title: Warehouse Stocker-Cherry Picker and Forklift Operator Schedule: • $17.70 per hour + additional $2.50 per hour for shift differential = $20.20 per hour. PAID WEEKLY!, • 8:00 pm-4:00 am (3rd Shift) Major Responsibilities: • Requires operating Cherry Pickers, Reach Trucks, Forklifts, and Electric Pallet Jacks, • Full case order selecting, • Replenishment processing, • Must be willing to cross train Skills/Knowledge Required: • Understanding and willingness to train on equipment such as Cherry Pickers, Reach Trucks, Forklifts, and Electric Pallet Jacks, • Ability to operate equipment in a safe and controlled manner, • Ability to handle 50+ pounds and work at heights of up to 25+ feet Benefits: • Health Benefits (medical, dental, vision) & Paid Parental Leave, • Generous PTO, • 9 Paid Company Holidays + 2 Floating Holidays, • 401k with company match, • Paid Weekly, • Overtime paid after 8 hours ABOUT ESSENDANT Essendant drives to be inclusive and celebrates diversity by starting with our associates. We are an Equal Employment Opportunity employer that is committed to building a diverse and inclusive environment. We strongly encourage candidates to apply for opportunities, even if you do not believe you meet every one of the qualifications described. At Essendant we are building an elevated community by creating a safe and supportive work environment. We prohibit discrimination and harassment of any kind, including or based on age, race, color, disability, ancestry, religion, sex, gender identity or expression, sexual orientation, pregnancy, marital status, national origin, protected veteran status, or any other characteristic protected by federal, state, or local laws. People are what drives our company. We are one team with endless possibilities. We are Essendant. #IND123 #ZR Company DescriptionEssendant drives to be inclusive and celebrates diversity by starting with our associates. We are an Equal Employment Opportunity employer that is committed to building a diverse and inclusive environment. We strongly encourage candidates to apply for opportunities, even if you do not believe you meet every one of the qualifications described. At Essendant we are building an elevated community by creating a safe and supportive work environment. We prohibit discrimination and harassment of any kind, including or based on age, race, color, disability, ancestry, religion, sex, gender identity or expression, sexual orientation, pregnancy, marital status, national origin, protected veteran status, or any other characteristic protected by federal, state, or local laws. People are what drives our company. We are one team with endless possibilities. We are Essendant.Essendant drives to be inclusive and celebrates diversity by starting with our associates. We are an Equal Employment Opportunity employer that is committed to building a diverse and inclusive environment. We strongly encourage candidates to apply for opportunities, even if you do not believe you meet every one of the qualifications described. At Essendant we are building an elevated community by creating a safe and supportive work environment. We prohibit discrimination and harassment of any kind, including or based on age, race, color, disability, ancestry, religion, sex, gender identity or expression, sexual orientation, pregnancy, marital status, national origin, protected veteran status, or any other characteristic protected by federal, state, or local laws. People are what drives our company. We are one team with endless possibilities. We are Essendant.

Job Description About the Role Hiring: 1st, 2nd & 3rd Shift We are seeking reliable and detail-oriented Production Inspectors to support our manufacturing operations. In this role, you will ensure that all products meet quality and safety standards throughout the production process. This is a hands-on position ideal for candidates with strong attention to detail, accuracy, and a commitment to quality. Key Responsibilities • Perform visual inspections of in-process components to verify compliance with specifications, • Identify, tag, and separate non-conforming parts, • Record inspection results, maintain logs, and complete required quality documentation, • Ensure proper functioning of measurement equipment and report any issues, • Follow all safety protocols and maintain a clean, compliant work environment, • Operate forklifts, power walkies, and production line equipment (as needed), • Assist production teams to maintain workflow and meet output requirements, • Conduct gauge-based and visual quality checks on manufactured products, • High School Diploma or GED, • Basic computer skills (Microsoft Office, barcode scanners, and inventory systems), • Strong math skills and excellent attention to detail, • Ability to perform fast and accurate visual inspections, • Familiarity with standard safety procedures, • Experience operating tools or machinery used for product testing, • Forklift or power walkie experience is a plus (training may be provided) Company DescriptionAgeatia was built on the principle of becoming a leading provider of workforce solutions for clients and candidates across the Engineering, Healthcare, Scientific and Information Technology industries. As we grow and evolve, we recognize our differentiation lies not just in traditional staffing, but in true partnerships and collaboration on hiring solutions. We bring value to our talent by helping them identify their individual skills and aptitudes, matching them with opportunities to excel and creating communities where they can foster their skills and always have a trusted partner in their career. In supporting our clients, we understand that each organization and culture is unique, and we thrive in collaborating with our clients to provide innovative solutions to suit their specific needs. The root of our growth and continued success stems from not only our loyal clients and talent, but the dedication of our people. Ageatia takes great pride in our teammates and the culture we built together as an organization. We promote an environment that rewards the hard work and perseverance necessary to solve the unique needs of our clients and talent. The Ageatia family might span across the country, but our team is tightly united around our core purpose, core values and our mission to provide superior service to our customers.Ageatia was built on the principle of becoming a leading provider of workforce solutions for clients and candidates across the Engineering, Healthcare, Scientific and Information Technology industries. As we grow and evolve, we recognize our differentiation lies not just in traditional staffing, but in true partnerships and collaboration on hiring solutions.\r\n\r\nWe bring value to our talent by helping them identify their individual skills and aptitudes, matching them with opportunities to excel and creating communities where they can foster their skills and always have a trusted partner in their career.\r\n\r\nIn supporting our clients, we understand that each organization and culture is unique, and we thrive in collaborating with our clients to provide innovative solutions to suit their specific needs.\r\n\r\nThe root of our growth and continued success stems from not only our loyal clients and talent, but the dedication of our people. Ageatia takes great pride in our teammates and the culture we built together as an organization. We promote an environment that rewards the hard work and perseverance necessary to solve the unique needs of our clients and talent. The Ageatia family might span across the country, but our team is tightly united around our core purpose, core values and our mission to provide superior service to our customers.

Job Description Unlock your potential with Prinova We are Prinova, a leading global supplier of ingredients and premix manufacturing solutions, and trusted by the world’s best-known food, beverage, and nutrition brands. Part of the NAGASE Group, our expertise lies in Ingredient Distribution, Manufacturing Solutions, and Customized Services. Our global network of colleagues, located in offices and manufacturing facilities around the world, deliver sustainable value-added solutions to our customers. We are recognized for our deep expertise, commitment to excellence, and bold innovation, which have earned us a strong reputation as a trusted industry leader. Wherever your career is headed, you’ll find direction, opportunity, and belonging with us. Quality Inspector Coordinator Department: Quality/Regulatory, Solutions Location: Carol Stream, IL Type: Full-time Summary: Primary responsibility for daily and assigned project QA/QC activities associated with in-process inspections for manufacturing and warehouse. Equipment swabbing, room clearance, sample verification, and work order review. Coordination of tasks associated with quality inspectors- calibration, scheduling validations, completing reports, and communication with vendors. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Perform production in-process inspections at the required frequencies, which include label approvals, CCP verification, weight checks, and manufacture pre and post operational review., • Perform sieve analysis on raw and blended materials., • Perform ATP, EMP, Allergen, and equipment swabbing., • Perform equipment calibration- scales, lab equipment, ATP meter, magnets., • Compile, analyze, and trend temperature and humidity data., • Verification of completion of records and storage., • Meeting due dates for calibration of equipment throughout the facility, scheduling 3rd-party calibrations., • Coordinate the completion of Allergen, EMP, Sanitation, and HACCP validation., • Coordination of Environmental swabbing, Water samples, and additional samples., • Coordinate and communicate with vendors regarding services, report storage, compliance, and scheduling., • Coordinate with Quality Inspectors to meet deadlines of tasks and assignments., • Perform monthly internal GMP audits., • Support initiatives and efforts aimed at improving quality processes and product excellence., • Complete and maintain sRCA and incident investigations., • Assist in quality related training activities and documentation of training., • Keeps abreast of current regulations and industry standards., • Abide by all food safety programs and be able to monitor the area for food safety adherence. None Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Education and/or Experience: • Ability to read, understand, and interpret regulatory information, industry standards, and International and Federal Food Regulations, • Proficient in basic arithmetic operations: addition, subtraction, multiplication, and division using whole numbers, fractions, and decimals, • Strong understanding of unit conversions across various measurement systems, • Excellent organizational skills and attention to detail, • Strong problem-solving skills, • Demonstrated ability to prioritize tasks, • Ability to function well in a high-paced and at times stressful environment, • Ability to make educated judgments on the correctness, accuracy, and appropriateness of information, • Knowledge of JD Edwards, DocuWare, and successful use of Microsoft Word, Excel, Teams, PPT, and Outlook What’s in it for you? Competitive Pay – $21 - $23 per hour Experience, education, geographic location and shift all taken into consideration. Benefits: • Medical, Dental, Vision, • Employer paid STD and LTD, • HSA and FSA, • Paid Maternity and Paternity Leave, • PTO, • Employer paid Basic Life Insurance, • 401(k) & Roth with employer match, • Eight Paid Holidays + 2 Floating Holidays, • Voluntary - Critical Illness, Hospital Indemnity, Accident, • Personal growth including training and development opportunities Disclaimer: Prinova is committed to providing equal opportunities without regard to race, color, religion, sex, pregnancy, creed, national origin, age, physical or mental disability, marital status, ancestry, veteran or military status, sexual orientation, gender identity and/or expression, genetic information, or any other characteristic or group status protected under applicable law. Company DescriptionAs one of the world's largest distributors of functional ingredients and a provider of nutrient premixes, Prinova creates value for global food, beverage and supplement manufacturers.As one of the world's largest distributors of functional ingredients and a provider of nutrient premixes, Prinova creates value for global food, beverage and supplement manufacturers.

Job Description At Planet Fitness, we pride ourselves in creating a culture that empowers people to live a healthy lifestyle. Our goal is to assist our members and our employees to reach their full potential. We are currently looking for a high energy individual with a passion for helping others and a drive to succeed to join our team! The Overnight Closer (Customer Service Representative) will be responsible for creating a positive member experience by providing a superior level of customer service to Planet Fitness members, prospective members and guests. The Overnight Closer will be responsible for creating a positive member experience by providing a superior level of customer service to Planet Fitness members, prospective members and guests. You will also be responsible for closing that day’s shift for that business day as well as creating an accurate bank deposit. Why Planet Fitness? Each of our employees receive: • Complimentary Back Card Membership, • Company Facilitated Training, • Advancement Opportunities, • Greet members, prospective members and guests, providing exceptional customer service., • Handle all front desk related activities including:, • Answer phones in a friendly manner and assist callers with a variety of questions., • Check members into the system., • New member sign-up., • Take prospective members on tours., • Facilitate needed updates to member’s accounts., • Respond to member questions and concerns in a timely and professional manner and elevate to Assistant Manager or Manager as needed., • Assist in maintaining the neatness and cleanliness of the club., • Close shift for that business day., • Customer service background preferred., • Basic computer proficiency., • A passion for fitness and health., • Upbeat and positive attitude!, • Punctuality and reliability is a must., • Exceptional customer service skills; able to interact in a positive and professional way with members and co-workers, exceeding the member’s expectations., • Strong listener with the ability to empathize and problem solve., • Demonstrate diplomacy in all interactions while using appropriate behavior and language., • High School diploma/GED equivalent required., • Continual standing and walking during shift., • Continual talking in person or on the phone during shift., • Ability to work 3rd shift (overnights)., • Must be able to occasionally lift up to 50 lbs., • Potential of up to three raises per year, • Great career advancement opportunities, • Insurance benefits for full time staff, • 401k benefits based upon eligibility

Job Description Coating Machine Operator Location: North Aurora, IL Schedule: 3rd Shift | 9:00pm to 5:00am (Overtime as needed) Pay Rate: $18.00/hour About the Role We’re seeking a dependable and detail-oriented Coating Machine Operator to join our team in North Aurora, IL. This position is responsible for operating coating machines to apply finishes to parts, monitoring product quality, and maintaining a safe and clean production environment. The ideal candidate has experience in a manufacturing setting and takes pride in producing high-quality work. Key Responsibilities * Operate coating machines to apply finishes according to production specifications. * Monitor coating quality and make adjustments to ensure consistent results. * Perform routine checks and basic troubleshooting on coating equipment. * Follow all safety procedures and maintain a clean, organized work area. * Document production output and report any quality or equipment issues. * Work overtime as required to meet production demands. Qualifications Education: High School Diploma or equivalent preferred. Experience: 1–2 years in a manufacturing or machine operator role preferred. Skills: * Ability to operate and monitor industrial machinery. * Strong attention to detail and quality standards. * Ability to follow work instructions and safety guidelines. * Dependable, punctual, and able to work extended shifts. * Ability to stand for long periods and perform repetitive tasks. Important Notes This role involves working in a production environment and requires consistent attention to quality and safety. Candidates must be comfortable working 12-hour shifts and overtime when needed. What We Offer We offer competitive pay and a supportive work environment with opportunities for long-term employment and growth. Equal Opportunity Employer We are proud to be an Equal Opportunity Employer and are committed to creating a diverse and inclusive workplace. Reasonable accommodations are available upon request. #zr Company DescriptionMidway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members.\r\n\r\nMidway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.

Job DescriptionShift Supervisor – Film Extrusion (2nd/3rd Shift)Location: Carol Stream, IL (moving to a brand-new Bartlett, IL facility) Job Type: Direct Hire Pay Rate: $29–$34/hour + overtime Schedule: • 5:00 PM – 5:00 AM, • Supervise and coordinate shift operations for film extrusion lines, including extruders, chill rolls, haul-offs, and winders, • Operate extrusion equipment as needed and provide training and guidance to operators, • Lead and organize line changeovers and ensure adherence to production schedules, • Monitor quality, safety, and output metrics to meet or exceed targets, • Troubleshoot process and equipment issues to minimize downtime, • Support new product trials and process validation activities, • Enforce company policies, OSHA regulations, and EHS standards, • Maintain accurate shift reports and production records in ERP/CMMS systems, • Collaborate with maintenance, engineering, and quality teams on continuous improvement initiatives, • Lead, coach, and evaluate employees; assist with hiring and team development, • Complete performance reviews and address disciplinary matters as needed, • Ensure strong 5S practices and safe work habits at all times, • Other duties as assignedQualifications:, • High school diploma or equivalent, • 10+ years of experience in plastic film extrusion, • Minimum of 2 years in a lead or supervisory role, • Strong hands-on knowledge of extrusion operations and troubleshooting, • Proven leadership skills including coaching, problem-solving, and delegation, • Ability to read and interpret safety rules, SOPs, technical drawings, and production schedules, • Basic math skills and proficiency with Microsoft Office, • Familiarity with ERP/CMMS systems (Epicor, Maximo, or similar), • Strong commitment to safety, quality, and continuous improvement, • Ability to lift and/or move up to 50 lbs., • Fluent in English (spoken and written)Preferred:, • Associate’s or Bachelor’s degree or technical certification in plastics, extrusion, or mechanical/electrical fields, • Strong mechanical aptitudePhysical Requirements & Work Environment, • Ability to stand and walk for extended periods (8–12 hour shifts), • Frequent bending, stooping, and reaching, • Ability to lift and carry 25–50 lbs. occasionally, • Manual dexterity to handle tools, equipment, and materials, • Ability to work in manufacturing conditions including heat, cold, humidity, noise, and dust, • Must wear required PPE including safety glasses, steel-toe shoes, and hearing protectionBenefits: The company offers a competitive benefits package including medical, dental, and vision insurance, retirement savings options, paid time off, holiday pay, and additional programs designed to support long-term growth, stability, and career advancement.

Job Description The Quality Assurance Technician is responsible for ensuring that all products manufactured at The Fresh Factory conform to food safety and quality specifications. This role will help drive operational improvements in food safety and quality by demonstrating best practices in GMPs, monitoring and verifying CCPs, and maintaining the company’s and our customers’ high standards for production. This position reports to the Quality Assurance Manager. Schedule: 10:00 pm - 6:30 am Location: On-site in Carol Stream, IL Pay: $18-26/hr, depending on experience & skillset, plus $0.25 differential for 2nd & 3rd shift Benefits We offer competitive pay and a comprehensive benefits package, including: • Medical, Dental, and Vision coverage, • Voluntary STD, LTD, and Life Insurance, • Employee Assistance Program (EAP), • Holiday pay, • A culture of trust and growth opportunities Responsibilities ● Test and release finished product samples ● Monitor key processing Critical Control Points ● Periodically test packaging integrity, fill weights, and fill levels ● Inspect finished goods packaging ● Collect retain samples ● Conduct pre-operational inspections and release equipment for use ● Perform environmental monitoring swabs, read and record results ● Inspect and document the condition of inbound and outbound trucks ● Participate in regular Food Safety Team meetings ● Ensure the plant is audit ready (SQF, Organic, FDA, and customer audits) Qualifications: ● Strong communication skills ● Previous experience in a food manufacturing facility ● Ability to work independently and as a member of a team ● Ability to work with multiple departments including Operations, Maintenance, Warehouse & Logistics, and Research & Development ● Ability to use a computer and tablet ● Must speak, read and write English ● Bilingual (English and Spanish) preferred Physical requirements • Move/Lift up to 50lbs, • Stands most of the day, • Works in Cold Room 25%-50% of the time, • Must wear Personal Protective Equipment About Us: At the Fresh Factory, we’ve built a platform to accelerate the growth of emerging food and beverage brands. We are vertically integrated from the farm to the shelf and offer services above and beyond traditional manufacturing, becoming a trusted growth partner for leading brands. We are growing quickly, adding exciting new products, processes, and packaging capabilities. Thanks to this growth, we are looking to add more Quality Assurance Technicians to our team. We are committed to creating a diverse and inclusive workplace. We do not discriminate in hiring or employment on the basis of race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, or any other legally protected status. This job description may be adjusted based on changing business needs.

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. \n\n \n\n Hourly Rate: $40.00/hr \n\n Primary Hours/Shift: 3rd Shift (10:00pm – 6:30am) \n\n \n\n Day to day responsibilities will include the following: \n\n \n\n\n\t • Perform preventive maintenance inspections on production equipment as needed and assigned\n\t, • Assist in developing related preventive maintenance that do not currently exist.\n\t, • Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment.\n\t, • Knowledge of the requirements and use of Lockout Tagout.\n\t, • Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash.\n\t, • Other duties as assigned.\n Job requirements: \n\n The successful candidate will possess the following skills and knowledge: \n\n\n\t • High School Diploma or GED required.\n\t, • 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred.\n\t, • Experience troubleshooting and repairing of high-speed manufacturing equipment.\n\t, • Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills\n\t, • Troubleshooting ability of AC/DC control circuits\n\t, • 120/240 VAC and 440 VAC single and three phase power circuits\n\t, • Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques\n\t, • An understanding of ladder logic AB RS Logics 5, 500, & 5000\n\t, • Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics\n\t, • Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection\n\t, • Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes\n\t, • Ability to read and understand manuals, prints and electrical schematics\n\t, • Good communication and basic computer skills\n\t, • Planning and organizing skills\n\n\n \n\n Physical requirements: \n\n\n\t • Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet)\n\t, • Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level\n\t, • Pushing, pulling, and lifting requirements: 25+ pounds.\n\t, • Good Color vision\n\t, • Exposure to high levels of noise (hearing protection required in plant area)\n

Maintenance Technician III In this role you will perform maintenance tasks of advanced complexity in support of production and facilities, coach and train others in performance of maintenance tasks. As a Maintenance Technician III you will: • Troubleshoot, repair and installation of a wide variety of complex electrical and mechanical equipment, including manual and automatic machines, • Work on process controls and/or electronic controls, • Work independently on secondary distribution systems, house wiring and three phase industrial power, • Perform general maintenance on machines, conveyors and structural material; including welding using arc, gas or automatic welding equipment, • Perform general layout and construction activities requiring advanced metal fabrication, carpentry and plumbing skills, • Communicate status of repairs and/or expected down times to Maintenance Manager and Production Managers and Supervisors as needed, • Work with Maintenance Supervisor and Manager to develop and implement a preventive maintenance schedule, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of maintenance tasks as needed, • Inspect all work prior to passing it on to the next operation, • Document actions by completing production and quality forms, • Has experience using small hand and power tools, • Possesses basic computer skills, • Is able to read and work from construction, mechanical and electrical drawings, • Has basic construction skills in light metal fabrication, carpentry, plumbing and electrical, • Is capable of installing, maintaining, and repairing a variety of manual and automated machinery independently, • Has the ability to read and follow complex equipment operating instructions., • Holds a High School diploma, GED or combination of work experience and skill development, • 2+ years' experience working in a manufacturing environment, • 5 or more years' experience installing, maintaining, and repairing a variety of manual and automated machinery desirable, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing - continuous, • Walking - continuous, • Bending/stooping - frequent, • Squatting/kneeling - frequent, • Lifting - frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering -continuous, • Variable hand/power tool use - frequent Pay Range is typically between $30 - $39 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Assembler I In this job you will perform a variety of sub-assembly and/or assembly operations of basic complexity. As an Assembler I you will: • Prepare work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials, • Position parts and subassemblies by using templates or reading measurements, • Assemble components by examining connections for correct fit; fastening parts and subassemblies, • Assist in the building of prototypes and/or other basic assembly projects outside of normal production as needed, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of basic assembly tasks as needed, • Inspect all work and ensure it meets requirements prior to passing it on to the next operation, • Has a High School diploma, GED or combination of work experience and skill development, • Ideally has 0-1 year experience working in a manufacturing environment, • Is able to safely use small hand and power tools, • Is able to read and interpret Drawings and Bills of Material, • Has basic computer skills, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing - continuous, • Walking - continuous, • Bending/stooping - frequent, • Squatting/kneeling - frequent, • Lifting - frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering -continuous, • Variable hand/power tool use - frequent Pay Range is typically between $20 - $24 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job Description Material Handler – Multiple Shifts Available Joliet Staffing is seeking reliable and motivated individuals to join our production team as Material Handlers. In this role, you will support daily manufacturing operations by efficiently moving, scanning, and staging materials to ensure continuous production flow. Your attention to detail, organization, and commitment to safety will help keep our presses running smoothly and ensure timely delivery of products. 1st Shift: $18/hr | 2nd Shift: $19/hr | 3rd Shift: $20/hr Benefits Offered: Medical, Dental, AD&D (through Joliet Staffing) Job Summary The Material Handler is responsible for the safe and efficient movement of materials to and from assigned presses and other production areas. Key Responsibilities • Follow all company and departmental safety rules and procedures., • Use an RF Scanner for IQMS to scan materials in and out as required., • Maintain a smooth flow of product to and from equipment., • Move completed skids to the designated areas., • Assist with building skids when necessary., • Package, label, and stack finished products according to specifications., • Prepare and dispose of scrap material following proper recycling procedures., • Organize materials on the production floor to support efficiency., • Perform warehouse inventory and cycle counts to assist with staging pre-production products., • Complete end-of-day disposition tasks for finished goods., • Perform other duties as assigned.Requirements, • Minimum of 1 year of Material Handler experience in a manufacturing or production environment preferred., • Must be able to complete at least 2 weeks of 1st-shift training (due to lack of fully trained handlers on site)., • Ability to lift, move, and handle materials safely and efficiently., • Strong attention to detail and ability to follow procedures., • Reliable, punctual, and able to work in a fast-paced environment. #IND-M

Job DescriptionJob Summary/Company: Our client is seeking a skilled Industrial Maintenance Technician to join our team in Bolingbrook, IL on third shift working Monday through Friday 11:00pm - 7:00am. As an Industrial Maintenance Technician, you will play a crucial role in ensuring the smooth operation and maintenance of our manufacturing equipment and systems. Responsibilities: • Perform comprehensive troubleshooting, diagnosis, and repair of production equipment., • Execute preventive and predictive maintenance of all production equipment., • Set up equipment in coordination with the production shift supervisor, aligning with the production schedule., • Ensure compliance with safety and employee conduct rules, promoting a clean and hazard-free workspace., • Participate in plant safety/housekeeping guidelines., • Ensure all maintenance work complies with ISO standards., • Expertise in troubleshooting and repairing complex electrical machinery., • Profound understanding of mechanical systems, pumps, conveyors, compressors, rollers & chains, bearings, and hydraulics., • Competence in reading and interpreting blueprints, diagrams, and schematics to repair and assemble equipment., • Proficiency in computer-based machine software navigation and interpretation.Preferred Skills:, • Proficiency in PLC, AC/DC, Pneumatics and Hydraulics., • 2-4 years of vocational and/or maintenance technician experience., • Technical degree from an accredited institution. This job is In-Person. We offer several comprehensive benefits package including health and life insurance, paid and unpaid time off, and retirement and savings plans to qualifying employees. Download the Sparks Group mobile app from Apple App Store or Google Play. Sparks Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, pregnancy, citizenship, family status, genetic information, disability, or protect veteran status.

Job Description Home Run Inn Pizza is looking for a well experienced and reliable maintenance technician to work at our Food Production Plant in Woodridge, IL. We Make Frozen Pizzas! This will be a 3rd shift job working in a food production environment. Shifts: Monday- Thursday 10:30pm-7:00am. and rotating Sundays 5:00am-1:30pm Pay: $34-42/hr.+ contingent on skill-set and years of experience Position Summary: The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair to minimize downtime. Providing a safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. • An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls, and power transmission systems, • PLC trouble shooting and problem solving ability with practical, mechanical & electrical aptitude., • Must be able to read and interpret both electrical and mechanical drawings, • Working knowledge of power transmission equipment and bearings, • Familiar with pumps, both air and electric, • Able to install and trouble shoot basic 3 phase motor control circuits, • Some knowledge of the various types of sensors and limit switches., • Troubleshoot, diagnose, and repair equipment breakdowns involving mechanical, hydraulic and electrical components., • Utilize electrical/mechanical skills to maintain machinery., • Contribute to a collaborative safety culture that drives results., • Provide rapid response to ensure seamless productivity, • Set-up production equipment necessary for the specific days’ activity. Assist with shutdowns as well., • Disassemble equipment, rebuild, and replace defective parts and components as needed and reassemble to make final equipment adjustments., • Perform regular checks on all building equipment and document accordingly., • Work closely with production personnel re: equipment repairs and machine set-up procedures., • Generate and complete work orders as assigned., • Assist on new equipment layout and setup., • Communicate inventory levels to department manager., • Attend training classes., • On call during off hours for emergency., • Ability to work all shifts as needed., • Perform other related duties as assigned Requirements: • Electrical and mechanical aptitude required in addition to at least 5 years of related maintenance experience., • 2-3 years in trouble shooting industrial electrical control systems down to component level, • Ability to lift up to 60 pounds, stand for long periods of time, bend, twist and stoop., • Ability to use various maintenance tools and personal computer., • Ability to work all shifts as needed and be on-call for emergencies., • Ability to work in a production environment. This job has exposure to ambient/refrigerator/freezer, • Ability to read & draw schematics., • Hydraulic and pneumatic systems experience is preferred, • High level of electrical understanding (high & low voltage). Company DescriptionHome Run Inn isn’t just a place to work — it’s a Chicago original with deep family roots and an exciting future ahead. Born from a small tavern on Chicago’s South Side in 1947, Home Run Inn has grown into one of the city’s most beloved pizza brands, still family-owned and operated after more than 75 years. Every pizza carries a piece of that legacy — made with the same all-natural ingredients and passion that started it all. As we continue to expand, we’re looking for team members who want to be part of something special: a company that values family, takes pride in its craft, and is driven to share Chicago’s favorite pizza with more communities across the country. Joining Home Run Inn means joining a proud tradition — and helping shape its next chapter.Home Run Inn isn’t just a place to work — it’s a Chicago original with deep family roots and an exciting future ahead. Born from a small tavern on Chicago’s South Side in 1947, Home Run Inn has grown into one of the city’s most beloved pizza brands, still family-owned and operated after more than 75 years. Every pizza carries a piece of that legacy — made with the same all-natural ingredients and passion that started it all. As we continue to expand, we’re looking for team members who want to be part of something special: a company that values family, takes pride in its craft, and is driven to share Chicago’s favorite pizza with more communities across the country. Joining Home Run Inn means joining a proud tradition — and helping shape its next chapter.

Job Description Maintenance Technician A manufacturing company in Carol Stream, IL is seeking a Maintenance Technician to support plant operations in a corrugated packaging environment. This role focuses on preventive and corrective maintenance of production equipment and facility systems to ensure efficient operations and minimal machine downtime. Responsibilities of the Maintenance Technician • Perform routine preventive and corrective maintenance on industrial equipment, including mechanical, electrical, pneumatic, and hydraulic systems, • Troubleshoot and repair equipment failures to quickly restore production functionality, • Diagnose issues with conveyor systems, pumps, motors, chain drives, belt/pulley systems, and related components, • Support fabrication tasks such as welding and part modifications, • Maintain accurate records of maintenance activities and repairs, • Industrial maintenance experience, ideally in a manufacturing or corrugated packaging environment, • Strong mechanical aptitude and hands-on troubleshooting skills, • Ability to work with basic electrical controls and perform general repairs, • Comfortable working in a manufacturing environment with machinery and noise 2nd and 3rd shift available, DIRECT HIRE Pay is $33.00 - $35.00 an hour, willing to pay more based on experience

Job Description Windy City Wire is looking for a Maintenance Technician for 3rd shift. They will perform general maintenance, repair, troubleshoot, and install production equipment, in accordance with safety, predictive, and productive maintenance systems. • Maintain and repair manufacturing equipment., • Perform predictive and preventive maintenance on machines, equipment and plant facilities., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines., • Adjust, calibrate, clean and lubricate equipment. Move machinery and equipment as needed, • Read and interpret blueprints and equipment manuals to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and make adjustments., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Comply with safety regulations and maintain clean and orderly work areas. Cold and warm temperatures, moving mechanical parts. Job sites can be loud. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing. Occasionally lift and/or move items over 50 pounds. Working hours: Monday through Friday, 11PM to 7AM, Saturdays as needed Required Education and Experience • High school diploma/GED, • 2+ years of manufacturing maintenance experience preferred, • Electrical knowledge, up to 3 Phase 480V is highly desirable, • PLC and VFD experience are a plus Shifts: • Paid time off, Health, Dental, Vision, 401K with company match all start on date of hireCompany DescriptionWindy City Wire has been leading the way in low-voltage wire innovations since 1994. As a company, we are dedicated to developing solutions that generate significant results for our customers. We don’t want to simply sell cable, we want to provide comprehensive cable management solutions that save integrators time on their projects from concept to completion.Windy City Wire has been leading the way in low-voltage wire innovations since 1994. As a company, we are dedicated to developing solutions that generate significant results for our customers. We don’t want to simply sell cable, we want to provide comprehensive cable management solutions that save integrators time on their projects from concept to completion.

Job Description: GardaWorld Security Services is Now Hiring a Surveillance Security Officer! Ready to suit up as a Surveillance Security Guard? What matters most about a role like this is your sharp eye, capturing every detail as you scan a series of screens. Tell us about your strong observation skills with attention to detail. As a Security Officer – Surveillance, you will be the person spotting threats before they escalate in environments such as a security operations centers, call centers, parking gatehouses, etc. What’s in it for you: • Site Location: Lisle, IL, • Set schedule: Full time, Thursday and Friday, 3rd shift, 11 p.m. to 7 a.m., Saturday and Sunday, 3rd shift, 7 p.m. to 7 a.m., and alternating Wednesdays, 3rd shift, 11 p.m. to 7 a.m., • Competitive hourly wage of $17.50 / hour (DailyPay is available for GardaWorld employees!), • A comprehensive benefits package including medical, dental, and vision insurance plans, a 401(k) retirement savings plan with employer matching contributions, paid time off (PTO) policy, paid holidays, disability coverage, and life insurance options, • Career growth opportunities at GardaWorld, • Monitor security systems to detect any suspicious activity, • Document observed events and incidents, writing detailed reports, • Respond quickly to incidents or potential threats, • Conduct regular patrols to ensure the safety of the premises, • Control access to secure areas and verify the identities of visitors, • Analyze security systems to identify potential vulnerabilities or malfunctions, • Collaborate with law enforcement in case of serious situations or emergencies, • Must have a VALID IL PERC, • Must have at least 1 year security experience, • Be authorized to work in the U.S., • Be able to provide documentation of High School Diploma or GED, • Be able to ace (and pass) an extensive screening process, • Strong report writing skills, • Sharp visual activity and exceptional concentration skills, • Strong proficiency with technology, • If you have Security, Military, Law Enforcement experience – even better! If you’re ambitious with an entrepreneurial spirit – someone who wants to be a GardaWorld Ambassador – a promising career awaits you! GardaWorld Security is a global champion in sophisticated and tailored security solutions, employing and training highly skilled and dedicated professionals across the globe. Not the job for you? Make sure to check out all our jobs! We also have tactical, concierge, and even casual roles available. Employment is contingent on the successful completion of a background check and drug screening to be conducted after an offer of employment is extended. It is the policy of GardaWorld Security Services to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, veteran status, or disability in accordance with applicable federal laws. In addition, GardaWorld Security Services complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment including, but not limited to hiring, placement, assignment, promotion, termination, layoffs, recalls, transfers, leaves of absence, compensation, and training. It is also the policy of GardaWorld Security Services not to honor requests that employees be assigned on the basis of sex or any other classification protected by law, unless such request is based on a bona fide occupational qualification for that assignment. 122.000986

Job DescriptionDescription: Home Run Inn Pizza is looking for a reliable and experienced Industrial Maintenance Technician to join our Food Production Plant on 3rd Shift! Location: Woodridge, IL Position Summary: The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair to minimize downtime. Providing a safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. Shift Details: Monday-Thursday 5:00pm-1:30am and Sunday-5:00am-1:30pm. Responsibilities: • An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase power, communication devices, industrial / electronic controls, and power transmission systems, • PLC trouble shooting and problem solving ability with practical, mechanical & electrical aptitude., • Must be able to read and interpret both electrical and mechanical drawings, • Working knowledge of power transmission equipment and bearings, • Familiar with pumps, both air and electric, • Able to install and trouble shoot basic 3 phase motor control circuits, • Some knowledge of the various types of sensors and limit switches., • Troubleshoot, diagnose, and repair equipment breakdowns involving mechanical, hydraulic and electrical components., • Utilize electrical/mechanical skills to maintain machinery., • Contribute to a collaborative safety culture that drives results., • Provide rapid response to ensure seamless productivity, • Set-up production equipment necessary for the specific days’ activity. Assist with shutdowns as well., • Disassemble equipment, rebuild, and replace defective parts and components as needed and reassemble to make final equipment adjustmentsRequirements:, • Electrical and mechanical aptitude required in addition to at least 5 years of related maintenance experience., • 2-3 years in trouble shooting industrial electrical control systems down to component level, • Ability to lift up to 60 pounds, stand for long periods of time, bend, twist and stoop., • Ability to use various maintenance tools and personal computer., • Ability to work all shifts as needed and be on-call for emergencies., • Ability to work in a production environment. This job has exposure to ambient/refrigerator/freezer, • Ability to read & draw schematics., • Hydraulic and pneumatic systems experience is preferred, • High level of electrical understanding (high & low voltage). Home Run Inn Pizza is a fourth-generation family business that competes in both the restaurant and frozen food industries. Ideally you have one of our frozen pizzas in your freezer right now. Our primary goal at Home Run Inn Pizza is to be more than a participant in these industries. Our goal is to be a leader. We currently dominate the Chicago frozen pizza landscape, and we know exactly why. We’ve identified the key elements of our Chicago strategy and have decided it is time to become the leading tavern style pizza nationally!

Job Description TITLE:Maintenance Technician SHIFT: 3rd SHIFT REPORTS TO: Maintenance Coordinator LOCATION: Parker Hannifin-Woodridge, IL BENEFITS: * Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary life insurance, accident insurance, hospital indemnity insurance, and critical illness insurance, all with competitive premium costs. * A 401(k) plan with company matching contributions of 100% on the first 5% of pay. * A company-provided defined-contribution retirement plan with an annual contribution equal to 3% of pay. * Career development opportunities and tuition reimbursement. * Additional benefits, including paid parental leave, short and long-term disability programs, adoption assistance, a Care.com membership, and financial planning assistance, provided at no cost to you. * Supplemental benefit programs, including identity protection, legal protection, and pet wellness, available at competitive rates. * Paid Time Off and 13 company-paid holidays. * Participation in Annual Incentive Program **DUTIES AND RESPONSIBLILITES: ** This position is part of the Maintenance Department. The responsibilities of the employees in the Maintenance Department may include any combination of the following duties. The position reports to the Maintenance Coordinator. **MAINTENANCE TECHNICIAN RESPONDSIBLITIES: ** * Responsible for building and repairing various machines/ equipment as assigned. * Maintain various machine components such as hydraulics, electrical circuits and AC/DC motor controls, speed controls and motor starters. * Responsible for installing and repairing all electrical circuitry on various machines. * Maintain and add electrical circuits to ensure appropriate electrical capacity for the facility. * Accurately program all machines to perform necessary functions. * Order all necessary parts for assigned projects. * Maintain hydraulic and electrical controls for molding presses. * Basic Schematic Interpretation. * Maintain the safety of our equipment for the protection of our workers. * Ensure project goals (such as budgets and deadlines) are achieved. * MIG and TIG Welding. * All other duties as assigned. **PHYSICAL REQUIREMENTS: ** * Work will require full range of motion, and work in standing, sitting, kneeling and leaning positions. * Lifting of tools and equipment of up to 50 pounds. * Some work will be performed while on a ladder. **EDUCATION AND/OR EXPERIENCE REQUIRED: ** * High School Diploma. * Experience in equipment maintenance. * Experience with hydraulic, pneumatic, electronic and other mechanical equipment. **PREFERRED: ** * Drafting Skills in Auto Cad or Solidworks * MIG and TIG Welding. You should be proficient in: • Mechanical Troubleshooting Skills, • Pneumatics Experience, • Hydraulics Experience, • Electrical Systems Diagnostics & Repair $29.04 - $31.85 / hr

Job DescriptionDescription: Champion Packaging is dedicated to providing the highest quality products at competitive prices and delivering exceptional customer satisfaction while maintaining focus on minimizing impact to our environment. Champion Packaging strives to be a leader in our industry. We maintain a safe work environment, partner with carefully selected vendors, and promote a team atmosphere where new ideas from all employees are evaluated for use by the organization. We are currently looking for Warehouse Line workers to fill positions on third shift. Line workers will be responsible for verifying at the line that the proper components are used for the job, including labels, boxes and bottles. Check bottles prior to packing and will maintain a clean workstation, sweep, clean line as needed to ensure high-quality product is packed from each production line. Bilingual preferred but not required. Responsibilities Check bottles, boxes and Labels for the following prior to packing: • Bottles have no dents or damage, • Bottles are clean, • There is no visual contamination, • Labels are straight with no tears present, • Rejected bottles are placed in proper bin for recycle or bailing, • Bottles are placed in box properly, • The proper size box is being used, • Glue joints are glued properly, • Boxes are not damaged – free of any tears or crease Boxes are clean, • Labels are not torn on the bottles, • Label is oriented properly on the bottles prior to packingRequirements:, • Stand/walk for the majority of the shift, and be able to occasionally lift up to 50 pounds, • Have a great attitude and be a good teammate, • Be flexible to perform other duties as assigned, • Have spent at least 1 continuous year in a recent job, • 401(k), • Dental insurance, • Disability insurance, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance, • Paid Weekly Equal Opportunity Employer CPDI is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description At Planet Fitness, we pride ourselves in creating a culture that empowers people to live a healthy lifestyle. Our goal is to assist our members and our employees to reach their full potential. We are currently looking for a high energy individual with a passion for helping others and a drive to succeed to join our team! The Overnight Closer (Customer Service Representative) will be responsible for creating a positive member experience by providing a superior level of customer service to Planet Fitness members, prospective members and guests. The Overnight Closer will be responsible for creating a positive member experience by providing a superior level of customer service to Planet Fitness members, prospective members and guests. You will also be responsible for closing that day’s shift for that business day as well as creating an accurate bank deposit. Why Planet Fitness? Each of our employees receive: • Complimentary Back Card Membership, • Company Facilitated Training, • Advancement Opportunities, • Greet members, prospective members and guests, providing exceptional customer service., • Handle all front desk related activities including:, • Answer phones in a friendly manner and assist callers with a variety of questions., • Check members into the system., • New member sign-up., • Take prospective members on tours., • Facilitate needed updates to member’s accounts., • Respond to member questions and concerns in a timely and professional manner and elevate to Assistant Manager or Manager as needed., • Assist in maintaining the neatness and cleanliness of the club., • Close shift for that business day., • Customer service background preferred., • Basic computer proficiency., • A passion for fitness and health., • Upbeat and positive attitude!, • Punctuality and reliability is a must., • Exceptional customer service skills; able to interact in a positive and professional way with members and co-workers, exceeding the member’s expectations., • Strong listener with the ability to empathize and problem solve., • Demonstrate diplomacy in all interactions while using appropriate behavior and language., • High School diploma/GED equivalent required., • Continual standing and walking during shift., • Continual talking in person or on the phone during shift., • Ability to work 3rd shift (overnights)., • Must be able to occasionally lift up to 50 lbs., • Potential of up to three raises per year, • Great career advancement opportunities, • Insurance benefits for full time staff, • 401k benefits based upon eligibility

Job Description Freedom, a national Direct Mail Company based in Aurora, IL, is one of the largest, independently owned, privately held, direct mail marketing providers in the United States. Why Freedom? Because we are a leader in the direct mail space, investing in technology and resources to facilitate innovative ideas. We’re looking to add an experienced Maintenance Mechanic to our team on 3rd shift. Successful Maintenance Mechanics work well in a fast paced, production environment, and keep the equipment running smoothly through a combination of preventive maintenance and just in time repairs. In this position you will: • Perform regular preventative maintenance on various pieces of equipment including folders, inserters, and tabbers, • Perform electro-mechanical related maintenance as required or demonstrate basic mechanical skills, • Ensure that all safety devices are in place and functioning properly, • Read and interpret job instructions and assist with machine set-ups, • Basic knowledge of tools used for SAE or Metric hardware, • Strong mechanical aptitude and willingness to learn, • Ability to work without close supervision, • Able to lift up to 50 lbs and stand/walk constantly for duration of shift, • Must have a High School Diploma/GED, • Bilingual in English/Spanish strongly preferred, • Medical coverage, • Dental and Vision coverage, • Flexible Spending Account (FSA), • 401k saving plan with company match, • Paid Vacation, • Paid Holidays, • Perfect Attendance Bonus

Job Description Set-Up Technician - 2nd and 3rd Shift WeatherTech Direct is seeking well-qualified Set-Up Technicians to promptly and accurately set up/change over, start-up, and monitor processes of injection molding and thermoforming machines in the production department. This is a great opportunity to join the WeatherTech Direct team! • High performing, reliable, and teamwork-minded employees are rewarded with a competitive compensation and benefits package including the potential to earn end of year bonuses and pay increases., • The base hourly rate of pay starts at $22.00 per hour or more depending on experience, • Additional compensation: $1.00 per hour 2nd shift differential or $1.50 per hour 3rd shift differential As a Set-Up Technician, you will • Operate overhead crane to move molds between mold racks, machines, and pallets, • Operate sit down forklifts, reach trucks, and manual lifting devices to move molds and any other required items around the production facility, • Read and understand product briefs and process sheets to ensure accuracy in machine set up, • Operate HMI/MIU to optimize platen heights, install program for robots/robotics lines, and input process numbers for mold changes, set temperatures for molds, heater bands, and nozzle tips., • Climb into, under, and on machines; manually position and attach mold onto the machine, • Clean and inspect molds between each use; report any damage to Supervisor, send out any damaged molds for repair, • Perform assigned preventative maintenance tasks, • Train new and existing team members on different functions of the work area to ensure all can perform each task properly; share knowledge and best practices to help aid efficiency and productivity, • Perform all job functions in compliance with safety guidelines and company policies/procedures, • Keep work area in a clean and orderly condition while cleaning and maintaining equipment as needed, • Communicate clearly and work as part of a team, • Work a full-time schedule; work overtime as business demands including extended hours and/or weekends, • Perform other duties as assigned Qualifications • 2+ years of machine set-up experience, • 1 year of prior experience operating a powered industrial vehicle (forklift, reach truck), • High school diploma or equivalent, • Experience using basic hand and power tools, • Knowledge of plastics injection molding/thermoforming, • Able to successfully complete the WeatherTech Forklift Certification Program upon hire, including a written exam and hands-on driving evaluation, • Read, write, and understand verbal and written work orders/instructions in English, • Basic math, measuring, and computer skills required, • Be an excellent performer; deliver high-quality results consistently, • Demonstrate a high level of professionalism and a positive attitude, • Authorized to work in the United States Why you’ll love working at WeatherTech Direct WeatherTech Direct is proud to offer employees a competitive salary and benefits package, opportunities for internal promotions and skill development, and clean and safe workspace. Employees are offered an array of perks including: • Outstanding BlueCross BlueShield of Illinois medical plans; as well as dental, vision, short and long term disability, and company-paid life insurance, • 401(k) plan with employer match, • Paid vacation, holidays, and personal time WTC1

Job Description Process Technician WeatherTech Direct is seeking well-qualified Process Technicians to maintain injection molding manufacturing process equipment and ensure machinery operates safely and efficiently. This is a great opportunity to join the WeatherTech Direct team! • High performing, reliable, and teamwork-minded employees are rewarded with a competitive compensation and benefits package including the potential to earn end of year bonuses and pay increases., • The base hourly rate starts at $25 per hour or more, depending on experience, • Read and understand product briefs and process sheets to ensure accuracy in machine operations, • Confirm correct job is set up on assigned machine per production schedule, verifying mold number, material color, tooling is set up properly, etc., • Assist in setting up tooling as needed, • Operate a crane hoist to perform mold changes, • Climb into, under, and on machines; visually inspect the alignment of robots/molds, • Visually and physically inspect parts for defects; make adjustments to process to ensure parts conform to quality standards, • Perform assigned preventive maintenance tasks, • Perform all job functions in compliance with safety guidelines and company policies/procedures, • Keep work area in a clean and orderly condition while cleaning and maintaining equipment as needed, • Work weekends and overtime, as required, • 2+ years of recent machine set up experience, • 1 year of prior experience operating a powered industrial vehicle (forklift, reach truck), • Experience using basic hand power tools, • High school diploma or equivalent, • Knowledge of Plastics Injection Molding materials and equipment, • Mechanical, electrical, hydraulic, pneumatic, and robotic processes knowledge in a manufacturing environment, • Able to successfully complete the WeatherTech Forklift Certification Program upon hire, including a written exam and hands-on driving evaluation, • Read, write, and understand verbal and written work orders/instructions in English, • Possess basic math, measuring, and computer skills, • A high degree of attention and detail to prevent accidents, injuries, and quality issues, • Ability to work in a team environment without close supervision, • Flexibility to work weekends and overtime, as required WeatherTech Direct is proud to offer employees a competitive salary and benefits package, opportunities for internal promotions and skill development, a clean and safe workspace. Employees are offered an array of perks including: • Outstanding BlueCross BlueShield of Illinois medical plans; as well as dental, vision, short and long term disability, and company-paid life insurance, • 401(k) plan with employer match

Job DescriptionDescription: SUMMARY OF FUNCTIONS Actively involved in all duties for procedures related to laminate, expose or develop an image onto circuit boards. ESSENTIAL DUTIES AND RESPONSIBILITIES • Follow rout sheets, • Follow all posted procedures., • Has responsibility for operation of laminating machines, exposing units and developers, • Able to apply photo imageable resist to a copper panel, expose dry film primary image or LPO coated image. Able to work on inkjet machine., • Create photo tools for the printing of circuit boards., • Copying and developing films to be used., • Hand Lay-up artwork into multi-layer array panel before exposing film. Reports to department supervisor and Director of Operations. Requirements: QUALIFICATIONS A high school diploma is required. PHYSICAL DEMANDS Standing for long periods of time is required. No heavy lifting is expected. Exertion of up to 25 lbs. of force occasionally may be required. Good manual dexterity for the use of common office equipment such as computer terminals, calculator, copiers, and FAX machines. WORK ENVIRONMENT This position is in a manufacturing setting with exposure to noise, dirt and chemicals.

Job Description Freedom, a national Direct Mail Company based in Aurora, IL, is one of the largest, independently owned, privately held, direct mail marketing providers in the United States. Why Freedom? Because we are a leader in the direct mail space, investing in technology and resources to facilitate innovative ideas, driving true client delight. We’re looking to add an experienced Bindery Setup Mechanic to the 2nd and 3rd shift. We will train mechanically inclined individuals. We are seeking highly motivated, career-focused individuals to work in a fast-paced, teamwork-oriented environment. Responsibilities: • Must be experienced in setup and maintenance on Folders, Continuous Cutters and Card Affixers., • Experience on Stahl and MBO Folders a plus., • Electrical background preferred but not required, • One-three year’s experience as a Bindery Setup Mechanic, • High School Diploma or equivalent, • Exceptional organizational and communication skills, • Perfect Attendance Bonus, • Medical coverage, • Dental and Vision coverage, • Flexible Spending Account (FSA), • 401k saving plan, with company match, • Paid Vacation, • Paid HolidaysCompany DescriptionFreedom, a national Direct Mail Company, is one of the largest, independently owned, privately held, direct mail marketing providers in the United States.Freedom, a national Direct Mail Company, is one of the largest, independently owned, privately held, direct mail marketing providers in the United States.

Job Description Robot Technician WeatherTech Direct is seeking well-qualified Robot Technicians to perform configurations on the robotic systems and troubleshoot errors on the thermoforming machines in the Production department. This is a great opportunity to join our 3rd shift team! • High performing, reliable, and teamwork-minded employees are rewarded with a competitive compensation and benefits package including the potential to earn end of year bonuses and pay increases., • Starting rate: $24.00/hr. with a 2nd shift premium of $1/hr. and 3rd shift premium of $1.50/hr. As a Robot Technician you will • Configure robot systems and perform job calibrations for production operation, • Monitor robot systems during production and address or report any operational issues, • Assist in repairs to the robotic systems., • Understand the requirements of a properly installed and prepared tool and the impact of errors or improper setup on the robotic process, • Perform machine cycle and make any necessary robot program modifications, • Assess and troubleshoot operational errors, • Read and understand product briefs and process sheets to ensure accuracy in machine set up, • Operate HMI/MIU to optimize platen heights, install program for robots/robotics lines, and input process numbers for mold changes, • Understand and efficiently operate robotic pendants, controllers, and panels., • Use a tape measure to confirm mold sizes, • Ensure all equipment is in proper position before removing molds from machine, • Clean and inspect molds between each use; report any damage to Set Up Lead and Quality Department, send out any damaged molds for repair, • Install, repair, or replace end of arm tooling for robotic machines, • Perform assigned preventative maintenance and housekeeping tasks to prevent productivity losses and possible equipment damage, • Train new and existing team members on different functions of the work area to ensure all are able to perform all tasks properly; share knowledge and best practices to help aid efficiency and productivity, • Cross train in other areas with similar equipment, and in areas that immediately precede and follow the operations you are responsible for, • Perform all job functions in compliance with safety guidelines and company policies/procedures, • Maintain your training and full understanding of the quality requirements of the products your equipment / process produces, • Keep work area in a clean and orderly condition, clean and maintain equipment, • Communicate clearly and work as part of a team, • Work weekends and overtime, as required, • Set the next shift up for success, • Perform other duties as assigned Qualifications • Previous machine set up experience (preferred), • Hold a working knowledge of Plastics and Thermoforming (preferred), • Familiarity with mechanical, electrical, hydraulic and pneumatic processes in a manufacturing environment, • Knowledge of OSHA regulations as they pertain to manufacturing, • Ability to read, write, and understand verbal and written work orders/instructions in English, • Possess basic math, measuring, and computer skills (required), • A high degree of attention to safety to prevent accidents, injuries, and quality issues, • Possess experience using basic hand and power tools, • Be dependable with excellent attendance, • Be able to work without close supervision in a team environment, • Authorization work in the United States, • A high school diploma or equivalent (required), • Ability to operate a variety of measuring devices, machines, hand and power tools, manual lifting devices, and powered industrial vehicles Why you’ll love working at WeatherTech WeatherTech Direct is proud to offer employees a competitive salary and benefits package, opportunities for internal promotions and skill development, and a clean and safe workspace. Employees are offered an array of perks including: • Outstanding BlueCross BlueShield of Illinois medical plans; as well as dental, vision, short and long-term disability, and company-paid life insurance, • 401(k) plan, • Paid vacation, holidays, and personal time

Job DescriptionSalary: An Press Operator is in charge of preparing, adjusting, and running a Heidelberg XL-106 W/UV printing press and performing regular maintenance on the equipment. He/she is key to delivering high-quality printing and meeting our customers expectations. Key Responsibilities : • Prepare and adjust the press and all peripherical equipment, • Run the press and deliver a product that meets the client's needs and company expectations, • Perform quality controls while running and make necessary adjustments to the machine, • Perform maintenance and minor mechanical adjustments or repairs on the equipment following an established preventive maintenance schedule, • Ensure that all raw materials are available before starting production, • Work in very close collaboration with the Assistant Press Operator, • Participate in any other related task Profile : • Autonomous, Resourceful, Accountable, and Meticulous, • Great team spirit, • Flexible Job Type: Full-time Salary: From DOE Benefits: • 401(k), • Dental Insurance, • Health Insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • Vision insurance Schedule: • 8-hour shift, • Evening shift, • Monday to Friday, • Night shift, • Overnight shift, • Overtime, • Weekend availability Experience: • Printing: 2 years (Preferred)

Job Description Join Our Team at HuFriedyGroup – Innovating Excellence in Dental Instrument Manufacturing HuFriedyGroup is a leading manufacturer of dental instruments and infection prevention products. Our 10,000-plus products, hand-crafted by highly skilled artisans, are known for their precision, performance, longevity, reliability, and quality. To help dental professionals be The Best in Practice, HuFriedyGroup provides a unique combination of world class products, value-added services, clinical education, and dental community platforms that result in superior clinician performance and enhanced safety for dental professionals and their patients. Working at HuFriedyGroup is so much more than a job, as every employee has a part in driving and supporting the organization’s inspirational vision to be a global force in advancing dental performance through Best-In-Practice dentistry that improves lives around the world. We’re looking for a skilled and experienced CNC Machine Setup Level II to join our team. This person will be responsible for setting up complex parts from start to finish on CNC machines and supporting daily production through tool changes, machine changeovers, and routine maintenance. Key Responsibilities: * Set up complex parts on CNC machines (multi-axis lathes, Swiss-type lathes, vertical machining centers) * Perform tool changes, changeovers, and routine machine maintenance * Follow safety standards at all times (PPE, lifting techniques, safe chip handling, etc.) * Keep a clean and organized work area (toolbox, machines, gage tables, etc.) * Log setup and tool change times accurately using data collection terminals * Read and interpret complex blueprints and geometric tolerances * Select appropriate tooling from vending machines and tool cribs * Follow and complete setup instructions, tool layouts, and checklists * Conduct visual inspections and complete 1st article inspections to verify part quality * Perform minor program edits (tool locations, speeds/feeds) under supervision * Change stick tools, drills, boring bars, reamers, knurls (live and static tools) * Collaborate with engineering to optimize speeds, feeds, and cycle times * Mentor and support junior machinists and operators * Complete all job-related documentation accurately * Suggest process improvements and machining best practices * Perform other duties as assigned Requirements: * 8–10 years of precision CNC machine setup experience in a machine shop environment * Strong experience with measuring instruments and quality inspections * Proficiency with multi-axis CNC lathes, Swiss-type machines, and machining centers * Ability to write CNC programs using CAM software * Deep understanding of tooling, tool holders, inserts, and machine controls * Strong problem-solving skills and mechanical aptitude * Ability to work independently and in a team within a fast-paced environment * Strong communication and collaboration skills * Reliable and consistent attendance is a must Preferred Qualifications: * Experience mentoring others in a shop environment * Familiarity with setup optimization and process improvement initiatives Shift Hours: • 1st Shift: 6:00am to 2:30pm, • 2nd Shift:2:00pm to 10:30pm, • includes a .50 shift differential, • 3rd Shift: 10:00pm to 6:30am At HuFriedyGroup, we understand that valuable skills and experience come from all walks of life. If you don’t have a college degree or high school diploma, don’t worry—it won’t disqualify you from being considered for this role. We value the unique perspectives and abilities you bring to the table. Equal Employment Opportunity & Accessibility Statement HuFriedyGroup is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We prohibit discrimination and harassment of any kind based on race, color, religion, age, gender, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. If you require reasonable accommodations to apply for a position, participate in the recruitment process, or perform essential job functions, please contact us at 773-868-5534. We are committed to supporting you throughout your journey with HuFriedyGroup!

Job DescriptionDescription: SUMMARY OF FUNCTIONS Actively involved in all duties for procedures related to plating processing a variety of circuit board to obtain multiple finishes for electrical conductivity. ESSENTIAL DUTIES AND RESPONSIBILITIES • Prepare tanks by removing residue, checking anodes and making necessary additions., • Setting proper temperatures and cycle times., • Prepare the surface of the board through various cleaning processes., • Verify quality requirements to finished product. Reports to department supervisor and Director of Operations. Requirements: QUALIFICATIONS A high school diploma is required. PHYSICAL DEMANDS Standing for long periods of time is required. Exertion of up to 50 lbs. of force occasionally may be required. Good manual dexterity for the use of common office equipment such as computer terminals, calculator, copiers, and FAX machines. Use of plating thickness instruments including microscope, fixture and hand tools so good vision and dexterity required. WORK ENVIRONMENT This position is in a manufacturing setting with exposure to noise, dirt and chemicals. WORK SCHEDULE Monday - Friday from 10:30 p.m. - 7:00 a.m. Training may take place on 1st or 2nd shift

Job DescriptionDescription: SUMMARY OF FUNCTIONS Actively involved in all duties for procedures related to screening process to manually apply various soldermasks and legends to circuit boards. ESSENTIAL DUTIES AND RESPONSIBILITIES • Set up jobs from travelers and verify registration., • Operate various presses., • Operate pumice scrubber., • Develop LPI Ink or Dry Film off circuit boards through the developer Reports to department supervisor and Director of Operations. Requirements: QUALIFICATIONS A high school diploma is required. PHYSICAL DEMANDS Standing for long periods of time is required. Exertion of up to 50 lbs. of force occasionally may be required. Good manual dexterity for the use of common office equipment such as computer terminals, calculator, copiers, and FAX machines. Use of hand tools requires dexterity. WORK ENVIRONMENT This position is in a manufacturing setting with exposure to noise, dirt and chemicals. WORK SCHEDULE Monday - Friday from 10:30 p.m. - 7:30 a.m. with occasional half days on Saturdays Training will likely take place on 1st or 2nd shift.

Job DescriptionSalary: We pay competitively based on work experience COME AND JOIN OUR GROWING COMPANY! IML Labels is a North American printing company specializing exclusively in IML (In-Mold Labeling). Established in 2007, we now service a wide variety of clients, from small enterprises to multinational companies. We are seeking dynamic and dedicated individuals to join our team at our plant in Aurora, IL. Job Description: In charge of running Heidelberg Die Cutting Equipment. Operate, perform quality control while it's running, make necessary adjustments, perform maintenance and minor mechanical adjustments or repairs on the equipment, follow an established preventative maintenance schedule, close communication with supervisor if there's damage to the cutting dies, reading, understanding, and following-up of production files, participate in any other related tasks as needed. Responsibilities: • Machine operation, including adjustments and maintenance, • Cutting and validation of adequate labels, • Packaging the labels and identifying the finished boxes, • Other related tasks will be assigned by the supervisor Requirements: • High school diploma, • Basic knowledge of the printing industry and good mechanical skills, • 1-2 years of preferred experience as a Die-Cutting Operator, • Overtime is required based on production needs (with advanced notice), • Great team spirit is a must! Shifts Available: • 2nd Shift 2:00 pm- 10:30pm, • 3rd Shift: 10:00 pm 6:30 am (Sun-Thru) Job Type: Full-time Benefits: • 401(k), • Dental Insurance, • Disability insurance, • Employee assistance program, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • 8-hour shift, • Evening shift, • Monday to Friday, • Overtime Supplemental pay types: • Bonus pay IML Labels Chicago Inc. is an equal opportunity employer. We do not discriminate based on race, color, ethnicity, ancestry, national origin, religion, sex, gender, gender identity, gender expression, sexual orientation, age, disability, veteran status, genetic information, marital status, or any legally protected status. Women, minorities, individuals with disabilities, and protected veterans are encouraged to apply.

Job Description Apply at Regal Rexnord's portal: with a resume! Take to new heights at Regal Rexnord where we foster a culture of innovation. Offering an hourly pay range of $22.00-$30.00, our inclusive benefits package and unmatched 401(k) match are just the start. Our workplace environment showcases advanced climate control technologies set for your comfort. Our aerospace and defense sector is on an exciting journey, expanding rapidly and we are on the lookout for dedicated individuals who relish the prospect of a $4,000 joining bonus! Rexnord Aerospace collaborates with top-tier aviation clients by delivering critical components like mechanical seals and high-spec electrical systems, essential for the aviation industry. Picture your day managing top-tier CNC machines, executing machining operations from turning to tapping with flawless precision. All while following stringent safety standards and ensuring your work environment remains pristine. Your Role: • Accurately utilize and comprehend process instructions and verbal directives., • Construct and adjust chuck jaws as tasks demand., • Install and secure tools in machine turrets for operations., • Comprehend the use of hand-operated tools where necessary., • Ensure effective setup and minor tweaking of CNC programs., • Implement tight machining tolerances through CNC manipulations., • Assess and modify operating coordinates reflecting tool and material demands., • Resolve common CNC malfunctions smoothly., • Mentor entry-level machinists., • Set and confirm preset gauge precision., • Partner with programmers and teams to rectify challenges., • Inspect and uphold the accuracy of all crafted components, documenting processes diligently., • Capacity to oversee various machines and adjust per departmental needs., • Due to federal restrictions, must be a 'U.S. Person.', • Sustained experience with CNC machines installed control knowledge., • Education: high school certificate or an analogous vocational background., • Proficiency in machining operations and math adequacy., • Understand intricate plans and blueprints with clarity., • Demonstrate scores in mechanical aptitude if external hires apply. Competitive Hourly Salary – along with Shift Differential for 2nd & 3rd shift * Robust Benefits Package Medical, Dental, Vision, STD, LTD, AD&D, Life Insurance, Matching 401(k) Contribution, HSA & FSA Savings Account * Educational Reimbursement Equal Opportunity Employer – Minority/Female/Disability/Veteran Expertise Required: GD&T, CNC Tooling, Deburring, Production Machinery Setup, and CNC Troubleshooting. Technology: Familiarity with CNC Mills and Lathes from Mazak, Haas, and Doosan.

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. Hourly Rate: $40.00/hr Primary Hours/Shift: 3rd Shift (10:00pm – 6:30am) Day to day responsibilities will include the following: • Perform preventive maintenance inspections on production equipment as needed and assigned, • Assist in developing related preventive maintenance that do not currently exist., • Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment., • Knowledge of the requirements and use of Lockout Tagout., • Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash., • Other duties as assigned. Job requirements: The successful candidate will possess the following skills and knowledge: • High School Diploma or GED required., • 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred., • Experience troubleshooting and repairing of high-speed manufacturing equipment., • Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills, • Troubleshooting ability of AC/DC control circuits, • 120/240 VAC and 440 VAC single and three phase power circuits, • Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques, • An understanding of ladder logic AB RS Logics 5, 500, & 5000, • Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics, • Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection, • Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes, • Ability to read and understand manuals, prints and electrical schematics, • Good communication and basic computer skills, • Planning and organizing skills Physical requirements: • Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet), • Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level, • Pushing, pulling, and lifting requirements: 25+ pounds., • Good Color vision, • Exposure to high levels of noise (hearing protection required in plant area)

Job Description Material Handler / Machine Operator / Packer Location: Aurora, IL Schedule: Multiple shifts available * Coater Operator (Machine Operator): 3:00 PM – 3:00 AM * Material Handler: 3rd Shift * Packers: 5:00 AM – 5:00 PM Pay Rate: $17.00 – $19.50 per hour (based on position and experience) About the Roles Midway Staffing is hiring for several warehouse and production positions n Aurora, IL. We are seeking dependable, safety-focused individuals with strong work ethic and experience in a fast-paced manufacturing environment. These roles support production, material movement, machine operation, and packing finished goods. Key Responsibilities Material Handlers * Move raw materials and finished products throughout the facility * Load/unload materials and stage inventory for production * Use pallet jacks or forklifts (if certified) * Maintain a clean and safe work area Machine Operators (Coater Operator) * Operate and monitor coating/machine equipment * Perform basic adjustments and troubleshoot minor issues * Ensure product meets quality and safety standards * Complete production logs and follow work instructions Packers * Inspect, sort, and pack finished product * Label and prepare orders for shipping * Maintain quality and accuracy in all packaging tasks * Support production as needed Qualifications * High School Diploma or equivalent preferred * 1+ year of warehouse, manufacturing, machine operation, or packing experience * Ability to lift up to 50 lbs and stand for long periods * Must be dependable, punctual, and able to work long shifts * Ability to follow instructions and maintain safety standards * Overtime may be required based on production needs Important Notes These positions require working in a fast-paced manufacturing environment. Candidates must be comfortable with physical tasks, mandatory overtime, and shift-based schedules. Contact Information Call our office at (331) 212-5187 or visit us at: 1460 N Farnsworth Ave, Aurora, IL 60505 What We Offer Midway Staffing offers a comprehensive benefits package including Medical, Dental, Vision, and Life/AD&D options for all eligible employees. About Midway Staffing Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. Recognized on the Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are proud to be an Equal Opportunity Employer and are committed to creating a diverse and inclusive workplace. If you require a reasonable accommodation during the application or interview process, please contact us at with the nature of your request and your contact information. #ZR Company DescriptionMidway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2024, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members.\r\n\r\nMidway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status.

Job Description Freedom, a national Direct Mail Company based in Aurora, IL, is one of the largest, independently owned, privately held, direct mail marketing providers in the United States. Why Freedom? Because we are a leader in the direct mail space, investing in technology and resources to facilitate innovative ideas, driving true client delight. We’re looking to add an experienced Bindery Setup Mechanic to the 2nd and 3rd shift. We will train mechanically inclined individuals. We are seeking highly motivated, career-focused individuals to work in a fast-paced, teamwork-oriented environment. Responsibilities: • Must be experienced in setup and maintenance on Folders, Continuous Cutters and Card Affixers., • Experience on Stahl and MBO Folders a plus., • Electrical background preferred but not required, • One-three year’s experience as a Bindery Setup Mechanic, • High School Diploma or equivalent, • Exceptional organizational and communication skills, • Perfect Attendance Bonus, • Medical coverage, • Dental and Vision coverage, • Flexible Spending Account (FSA), • 401k saving plan, with company match, • Paid Vacation

Job Description Description: ESSENDANT Inc. is an inclusive team environment that values the contributions of its associates through a great culture, competitive pay, and generous benefits. Job Title: Warehouse Order Selector-Cherry Picker and Forklift Operator Schedule: • $17.70 per hour + additional $2.50 per hour for shift differential = $20.20 per hour. PAID WEEKLY!, • 8:00 pm-4:00 am Major Responsibilities: • Requires operating Cherry Pickers, Reach Trucks, Forklifts, and Electric Pallet Jacks, • Full case order selecting, • Replenishment processing, • Must be willing to cross train Skills/Knowledge Required: • Understanding and willingness to train on equipment such as Cherry Pickers, Reach Trucks, Forklifts, and Electric Pallet Jacks, • Ability to operate equipment in a safe and controlled manner, • Ability to handle 50+ pounds and work at heights of up to 25+ feet Benefits: • Health Benefits (medical, dental, vision) & Paid Parental Leave, • Generous PTO, • 9 Paid Company Holidays + 2 Floating Holidays, • 401k with company match, • Paid Weekly, • Overtime paid after 8 hours ABOUT ESSENDANT Essendant drives to be inclusive and celebrates diversity by starting with our associates. We are an Equal Employment Opportunity employer that is committed to building a diverse and inclusive environment. We strongly encourage candidates to apply for opportunities, even if you do not believe you meet every one of the qualifications described. At Essendant we are building an elevated community by creating a safe and supportive work environment. We prohibit discrimination and harassment of any kind, including or based on age, race, color, disability, ancestry, religion, sex, gender identity or expression, sexual orientation, pregnancy, marital status, national origin, protected veteran status, or any other characteristic protected by federal, state, or local laws. People are what drives our company. We are one team with endless possibilities. We are Essendant. #IND123 #ZR Company DescriptionEssendant drives to be inclusive and celebrates diversity by starting with our associates. We are an Equal Employment Opportunity employer that is committed to building a diverse and inclusive environment. We strongly encourage candidates to apply for opportunities, even if you do not believe you meet every one of the qualifications described. At Essendant we are building an elevated community by creating a safe and supportive work environment. We prohibit discrimination and harassment of any kind, including or based on age, race, color, disability, ancestry, religion, sex, gender identity or expression, sexual orientation, pregnancy, marital status, national origin, protected veteran status, or any other characteristic protected by federal, state, or local laws. People are what drives our company. We are one team with endless possibilities. We are Essendant.Essendant drives to be inclusive and celebrates diversity by starting with our associates. We are an Equal Employment Opportunity employer that is committed to building a diverse and inclusive environment. We strongly encourage candidates to apply for opportunities, even if you do not believe you meet every one of the qualifications described. At Essendant we are building an elevated community by creating a safe and supportive work environment. We prohibit discrimination and harassment of any kind, including or based on age, race, color, disability, ancestry, religion, sex, gender identity or expression, sexual orientation, pregnancy, marital status, national origin, protected veteran status, or any other characteristic protected by federal, state, or local laws. People are what drives our company. We are one team with endless possibilities. We are Essendant.

Job Description Reach Truck/Forklift Operator WeatherTech Direct is seeking a well-qualified Reach Truck/Forklift Operator to safely operate powered industrial vehicles and manual lifting devices to load/unload and transport material to and from storage areas, machines, and loading docks. This is a great opportunity to join our 1st, 2nd and 3rd shift team! • High performing, reliable, and teamwork-minded employees are rewarded with a competitive compensation and benefits package including the potential to earn end of year bonuses and pay increases., • The base hourly rate of pay starts at $22.00 per hour. 2nd Shift receives a $1.00 differential and 3rd shift receives a $1.50 differential., • 1st Shift - 6:00am-2:30pm. 2nd Shift - 3:00pm-11:30pm. 3rd Shift 11:00pm-7:30am. As a reach Truck/Forklift Operator, you will • Operate forklifts and manual lifting devices to deliver material to production machines/workstations; distribute material/inventory using the first in-first out method, • Manually or mechanically load or unload material from pallets, skids, platforms, lifting devices, or other transport vehicles, • Inspect product load for accuracy and safely move it around the facility, • Organize all production material and inventory; use RF Scanner to scan material to appropriate locations and verify quantities are accurate; restock material in floor and rack locations, • Ensure that all necessary inventory is available for production use and coordinate the ordering of material/inventory, • Complete daily inspection of equipment and communicate maintenance needs or damage; charge/fill batteries, • Perform other duties as assigned Qualifications • Minimum of 3 years of experience in operation and training of powered equipment with a clear understanding of forklift operations, weight capacities, and attachments, • 2+ years of steady experience operating a Reach Truck, • High school diploma or equivalent, • Be an excellent performer; deliver high-quality results consistently, • Demonstrate a high level of professionalism and a positive attitude, • Able to work well with and motivate a team, • Fluent in English and authorized to work in the United States Why you’ll love working at WeatherTech Direct WeatherTech Direct is proud to offer employees a competitive salary and benefits package, opportunities for internal promotions and skill development, and a clean and safe workspace. Employees are offered an array of perks including: • Outstanding BlueCross BlueShield of Illinois medical plans; as well as dental, vision, short and long term disability, and company-paid life insurance, • 401(k) plan with employer match, • Paid vacation, holidays, and personal time

Job Description The Maintenance Parts Clerk will be responsible for the oversight of the Maintenance Parts Room and inventory of the Maintenance Department. The parts clerk must have the ability to navigate through the maintenance CMMS system for inventory, PM's and variety of equipment. 1. Receive, inspect and store incoming parts, tools and supplies., 2. Maintain accurate records of inventory using the maintenance CMMS, 3. Issue parts and supplies to the maintenance technicians as needed., 5. Perform physical inventory counts and reconcile discrepancies., 6. Put away any parts returned back to the parts room and update the quantities back into the system., 7. Remove trash empty boxes and unserviceable parts. Knowlege, Skills, and Abilities. 1. Understand of inventory control principals and cycle counts, 2. Familiarity with maintenance parts, tools, and equipment relevant to this specific industry., 3. Knowledge of how to maintain accurate and organized records for inventory orders and transactions., 4. Clear verbal written communication to interact with technicians, and supervisors, 5. Ability to troubleshoot inventory issues, and supply mismatches efficiently., 6. Ability to manage multiple tasks, prioritize workloads, and keep the stockroom orderly., 7. Work in fast paced environment while handling frequent requests. To learn more, please visit our website at realgoodfoods.com or join us on social media @realgoodfoods – where we maintain some of the largest followings in the frozen food industry today.Real Good Foods is a leading health and wellness frozen foods company, providing a better way to enjoy your favorite foods. The Company’s mission is to provide “Real Food You Feel Good About Eating” making delicious, nutritious foods that are low in sugar, low in carbohydrates and high in protein. The Real Good Foods family of products includes breakfast, lunch, dinner, and snacks – available in over 16,000 stores nationwide with additional direct-to-consumer options. We're always seeking talented people to join our growing team. If you are passionate about taking your career to the next level at one of the fastest growing food companies in the US, please submit your resume.\r\n\r\nTo learn more, please visit our website at realgoodfoods.com or join us on social media @realgoodfoods – where we maintain some of the largest followings in the frozen food industry today.

Job DescriptionResponsibilities: • Maintain all facets of Injection Molding machines, associated processes, and PET Fiber Extrusion Lines., • Comprehend and troubleshoot fluid power systems, including hydraulic pumps, cylinders, and valves. Technicians must be able to read schematics, diagnose leaks, and perform preventive maintenance on these critical systems., • Read and interpret electrical schematics and blueprints to troubleshoot electrical controls. This includes working with single-phase and three-phase power, motor controls, servo systems, and safety circuits., • Service and repair support equipment that is vital to the injection molding process. This includes thermolators (temperature Control Units), chillers, resin dryers, material loaders, and cooling towers., • Perform regular equipment inspections, proactively identifying potential issues before they result in downtime and/or failure. Reduce downtime of machines to support production demand through incorporating proactive approaches., • Complete work orders related to machine repairs and/or preventive maintenance and perform preventive maintenance on machines as scheduled. Troubleshoot complex equipment and processes and perform machinery/equipment repairs., • Design, engineer, repair and/or fabricate basic machinery parts as required., • Assist with Molding machines changeovers to other products. Qualifications:, • Ability to work posted shift (3rd shift, 10 pm - 6 am)., • Experience in injection molding machine repair required., • High School diploma or GED equivalent required; Associate’s degree preferred., • Experienced in electrical, process, pneumatic, and automation, with a base PLC knowledge / troubleshooting. Mechanical aptitude with ability to read and interpret mechanical, electrical and pneumatic drawings., • Knowledge of auxiliary equipment - hydraulics, mold temperature controllers, hot runner controllers, sprue pickers, robots. Mold setup experience., • Ability to utilize strong analytical skills to quickly diagnose the root cause of complex mechanical and electrical failures. This is essential for minimizing machine downtime and recurring issues., • Ability to communicate effectively and professionally both verbally and written with production staff, engineers, and management to coordinate maintenance activities and report on equipment status., • Mechanical Troubleshooting Skills, • Electrical Troubleshooting, • Electrical Repair, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Industrial Electrical Experience, • Injection Molding Machine