Mechanical engineering jobs in Charlotte, North Carolina - Page 2Create job alerts

RS&H is seeking a talented Senior Mechanical Engineer to join our Charlotte location.At RS&H, we turn our "Clients" vision into reality with innovative, practical, engineering solutions for the largest Corporations and Healthcare Networks in the world.The position will work closely with our engineer

Charlotte, NC Engineering Design Center.We are looking for a range of qualifications ranging from entry level graduate engineers to experienced engineers seasoned in the industry.Responsible in the Design Office for Project specific Mechanical Engineering and Design functions.Must have bachelor's in

The Electrical Design Engineer will work under the guidance of the Engineering Supervisor to design electrical systems, collaborating with mechanical, electrical, and project management professionals. Create and maintain electrical schematics and support drawings using EPLAN and AutoCAD electrical s

For other opportunities available at Garney Construction go to careers. Candidates must be currently enrolled and pursuing a degree in construction management, civil or mechanical engineering, or another related field.

NDE programs within the nuclear industry. Bachelor's degree in Mechanical, Materials, Nuclear, or related Engineering discipline (advanced degree preferred). Certain positions at SIA may require access to information and technology which is subject to Export Administration Regulations 15 CFR 730-774

The Electrical Engineering Co-Op will engage in hardware-focused development activities across three progressive terms, where candidate will be working closely with cross-functional teams including Hardware, Firmware, Mechanical, and Software Engineering Teams:. Candidate is currently enrolled in an

Coach and mentor direct reports through daily construction and commissioning questions and share best practices. Assist PMs in the scheduling or forecasting of construction projects. Associate or bachelor's degree in construction management, mechanical or electrical engineering preferred, however, c

Plumbing and Fire Protection Design. Size, select, schedule, and design plumbing system components to include fixtures, specialties, and equipment. Jordan & Skala Engineers is a leading mechanical, electrical and plumbing engineering firm with regional design offices located throughout the United St

Coordinate and manage project engineering teams consisting of electrical, mechanical, and plumbing/fire protection engineers and designers. Bachelor's degree in electrical engineering. Lead electrical engineers and designers in developing conceptual designs and design options for clients, schematic

Evaluate, select and apply standard engineering techniques, procedures, and criteria to perform assigned tasks. Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications. Research, design, and evaluate mechanical product

Under the direction of the Engineering Supervisor, the Electrical Design Engineer is responsible for working closely with highly skilled mechanical, electrical, and project management professionals, to design electrical systems.Knowledgeable in applicable engineering methods, practices, standards, a

In this technical role, you will be preparing engineering drawings, calculations, process and instrumentation diagrams (P&IDs), specifications, and technical reports for a variety of drinking water treatment infrastructure as part of the BC's Design Services Process Mechanical Group.You will be expe

Job DescriptionDescription: Monday - Thursday, 5:00 am - 4:00 pm (Will work on Friday's depending on business needs) Summary: Ensures safe, reliable, and efficient production by maintaining equipment and facilities, supporting quality and operational needs, and contributing to continuous improvement across the facility in accordance with established practices, processes, regulations, guidelines and standards. Essential Duties and Responsibilities: Other duties may be assigned. Abide by, enforce and participate in the implementation and ongoing oversight of all company safety standards and regulations, including lockout/tagout, and maintain a clean, organized work area. Inspect, operate, or test machinery/equipment to detect malfunctions or defects in physical structures. Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following standard procedures. Perform Preventative and corrective maintenance on machinery and physical structures with a focus on reducing downtime and improving equipment reliability. Troubleshoot mechanical, electrical, pneumatic, and hydraulic issues and implement root-cause solutions. Partner with production, engineering, and quality teams to ensure machines run within specifications to support consistent, high-quality output. Identify and recommend process improvements that enhance equipment performance, reduce waste, and strengthen product quality. Assist with installation, setup, and optimization of new equipment and process improvements or upgrades. Maintain accurate and detailed maintenance records, documenting issues, corrective actions, and improvement opportunities. Assist with production needs such as unloading trucks, filling hoppers, and starting machinery as required to support workflow. Communicate work progress, repair timelines, and equipment status clearly with supervisors and production teams. Conduct regular production-floor checks to identify equipment issues early, monitor machine performance, and support consistent product quality. Train new associates in appropriate safety procedures, work instructions and quality standards. Actively contributes to continuous process improvement. Participate in training and continuous learning opportunities; meet training and/or certification requirements of the job, department, product or area as designated/defined in work instructions and quality standards. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Safety and Security - Observes safety and security procedures, Determines appropriate action beyond guidelines, Reports potentially unsafe conditions, Uses equipment and materials properly Problem Solving - Identifies and resolves problems in a timely manner, Gathers and analyzes information skillfully, Develops alternative solutions, Works well in group problem solving situations, Uses reason even when dealing with emotional topics Technical Skills - Assesses own strengths and weaknesses, Pursues training and development opportunities, Strives to continuously build knowledge and skills, Shares expertise with others Customer Service - Manages difficult or emotional customer situations, Responds promptly to customer needs, Solicits customer feedback to improve service, Responds to requests for service and assistance, Meets commitments Interpersonal - Focuses on solving conflict, not blaming, Maintains confidentiality, Listens to others without interrupting, Keeps emotions under control, Remains open to others' ideas and tries new things Oral Communication - Speaks clearly and persuasively in positive or negative situations, Listens and gets clarification, Responds well to questions, Demonstrates group presentation skills, Participates in meetings Team Work - Balances team and individual responsibilities, Exhibits objectivity and openness to others' views, Gives and welcomes feedback, Contributes to building a positive team spirit, Puts success of team above own interests, Able to build morale and group commitments to goals and objectives, Supports everyone's efforts to succeed, Recognizes accomplishments of other team members Written Communication - Writes clearly and informatively, Edits work for spelling and grammar, Varies writing style to meet needs, Presents numerical data effectively, Able to read and interpret written information Leadership - Exhibits confidence in self and others, Inspires and motivates others to perform well, Effectively influences actions and opinions of others, Accepts feedback from others, Gives appropriate recognition to others, Displays passion and optimism, Diversity - Demonstrates knowledge of EEO policy, Shows respect and sensitivity for cultural differences, Educates others on the value of diversity, Promotes a harassment-free environment, Builds a diverse workforce Ethics - Treats people with respect, Keeps commitments, Inspires the trust of others, Works with integrity and ethically, Upholds organizational values Organizational Support - Follows policies and procedures, Completes administrative tasks correctly and on time, Supports organization's goals and values, Benefits organization through outside activities, Supports affirmative action and respects diversity Adaptability - Adapts to changes in the work environment, Manages competing demands, Changes approach or method to best fit the situation, Able to deal with frequent change, delays, or unexpected events Attendance/Punctuality - Is consistently at work and on time, Ensures work responsibilities are covered when absent, Arrives at meetings and appointments on time Dependability - Follows instructions, responds to management direction, Takes responsibility for own actions, Keeps commitments, Commits to long hours of work when necessary to reach goals, Completes tasks on time or notifies appropriate person with an alternate plan Initiative - Volunteers readily, Undertakes self-development activities, Seeks increased responsibilities, Takes independent actions and calculated risks, Looks for and takes advantage of opportunities, Asks for and offers help when needed Judgment - Displays willingness to make decisions, Exhibits sound and accurate judgment, Supports and explains reasoning for decisions, Includes appropriate people in decision-making process, Makes timely decisions Motivation - Sets and achieves challenging goals, Demonstrates persistence and overcomes obstacles, Measures self against standard of excellence, Takes calculated risks to accomplish goals Professionalism - Approaches others in a tactful manner, Reacts well under pressure, Treats others with respect and consideration regardless of their status or position, Accepts responsibility for own actions, Follows through on commitments Quality - Looks for ways to improve and promote quality, Applies feedback to improve performance, Quantity - Meets productivity standards, Completes work in timely manner, Strives to increase productivity, Works quickly Requirements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or GED plus 2 years or more Vocational/Technical Program, or equivalent; and over 3 months up to and including 6 months; or any combination of education, experience and training. Language Ability: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent, and to draw and interpret bar graphs. Perform the four operations with like common and decimal fractions. Perform arithmetic operations involving all American monetary units. Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in or from standardized situations. Computer Skills: To perform this job successfully, an individual should have knowledge and experience in the use/application of: Microsoft Office Suite, Maintenance Management systems, PLC controls programming Certificates and Licenses: May be required to hold certification for the operation of industrial trucks. Supervisory Responsibilities: This job has no supervisory responsibilities. Physical Demands: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be engaging in these physical activities: • Stand - Over 2/3, • Walk - Over 2/3, • Sit - Under 1/3, • Use hands to finger(s), handle, or feel - Over 2/3, • Reach with hands and arms - Over 2/3, • Climb or balance - 1/3 to 2/3, • Stoop, kneel, crouch, or crawl - 1/3 to 2/3, • Talk or hear - Over 2/3 This job requires the ability to see details at close range (within a few feet of the observer) with or without corrective lenses. It also requires sustained mental concentration and visual effort. This job requires that the person be able to independently lift or exert the amount of force or weight within the frequency specified below: Lifting or Force Requirements Amount of Time • Over 2/3 (Frequently), • Up to 10 pounds (Constantly), • Up to 25 pounds (Constantly) Work Environment: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually loud due to the operation of industrial equipment and machinery. This job will be performed under the environmental factors given below: Environment Conditions Amount of Time • Wet or humid conditions (non-weather) - Under 1/3, • Work near moving mechanical parts - Over 2/3, • Work in high, precarious places - Under 1/3, • Fumes or airborne particles - None, • Toxic or caustic chemicals - Under 1/3, • Outdoor weather conditions - Under 1/3, • Extreme cold (non-weather) - None, • Extreme heat (non-weather) - None, • Risk of electrical shock - Under 1/3, • Work with explosives - None, • Risk of radiation - None The work environment characteristics described above necessitates the use of Personal Protective Equipment (PPE). The employee must wear the following prescribed personal protective equipment at all times while performing the duties of this job: safety glasses/goggles, closed shoes, hearing protection and other protective equipment as specified by OSHA and other federal/state regulations Additional and/or Department Specific Responsibilities: N/A Barnhardt Manufacturing Company is an Equal Employment Opportunity Employer (EOE/including disability/vets) Requirements:

Job Description Position Summary: The Quality Lead plays a critical role in ensuring that aluminum products meet EMS and customer specifications. This position involves inspecting and testing raw materials, in-process components, and finished products, conducting quality tests, and supporting continuous improvement initiatives within EMS distribution and manufacturing environments. Essential Duties/Responsibilities: • Audit workers engaged in inspection and testing activities to ensure high productivity and high technical integrity., • Inspect incoming inventory from mills for defects, dimensional accuracy, and compliance with industry standards., • Conduct in-process and final inspections of manufactured products., • Perform mechanical and visual tests using calipers, micrometers, hardness testers, and other precision instruments., • Document inspection results and maintain detailed quality records in accordance with ISO standards., • Identify non-conforming products and assist in root cause analysis and corrective action implementation., • Collaborate with production, warehouse, and engineering teams to resolve quality issues., • Ensure compliance with industry standards such as ASTM, ISO, and customer-specific requirements., • Participate in continuous improvement initiatives including 6S, Lean, and Six Sigma projects., • Keep areas clean and organized, • Performs other related duties as required Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: • High school diploma or equivalent required; bachelor's degree in related field preferred, • Be able to read, write and communicate in English effectively, • Valid driver's license Experience/Skills/Abilities Required: • Familiarity of precision measuring instruments such as calipers, micrometers, protractors, and taper gauges to verify dimensions against engineering drawings preferred, • The ability to accurately read and interpret engineering drawings and specifications is preferred., • Basic understanding of the aluminum extrusion process and common die defects., • Basic understanding of the painting process and common paint defects., • Extreme attention to detail, • Proficient in Microsoft Office, • Ability to multitask and prioritize effectively, • Ability to work independently and as a team, • Good communication and interpersonal skills Work Environment/Physical Demands: • Standing up to 8 hours per day, • Able to lift 50 pounds, • Able to work in warehouse atmosphere with varying temperatures We are an equal opportunity employer, dedicated to fostering a diverse and inclusive workplace where everyone is valued and has equal access to opportunities. WE ARE A DRUG FREE WORKPLACE. Job Posted by ApplicantPro

Job Description Company Information McKenney’s is the Southeast’s most trusted name in facility construction, operation and maintenance. For over 75 years, our proven approach has ensured high-quality, energy-efficient solutions at every stage of a building—Design, Build, Controls & Monitoring, and Maintenance & Repair. We offer expertise in HVAC, process piping, plumbing, and building automation and control systems, as well as service and maintenance. We have our own in-house engineering, fabrication, installation and commissioning resources to ensure cost-effective delivery of the highest quality solutions. JOB SUMMARY The ACS Account Manager is focused on new controls contract sales, customer relations, collection resolution, project management, and retrofit/upgrade project sales. JOB RESPONSIBILITIES • Marketing and sales efforts involve promoting company services and developing new business through strategic outreach and client engagement., • Customer development and retention focus on building strong relationships, meeting client needs, and encouraging long-term loyalty., • Estimating and budgeting by preparing accurate cost projections based on labor, materials, and the scope of work., • Written proposals developed to clearly communicate scope, pricing, and timelines in a professional and persuasive format., • Planning and scheduling include creating detailed timelines to guide team activities and meet project deadlines., • Cost control involves monitoring project expenses and implementing adjustments to stay within budget., • Ensuring quality and performance means upholding standards and verifying that work meets or exceeds expectations., • Timely invoicing and cash flow management require issuing invoices promptly and following up to ensure on-time payments., • Warranty administration includes managing post-project issues and ensuring prompt, effective resolution of warranty claims., • Review and understand contractual scope and project documents (drawings, submittals, equipment operations, and maintenance manuals), • Ensure quality, performance, and adherence to project requirements, enforcing safety and quality standards, • Promote and uphold McKenney’s safety absolutes, best practices, and company culture, • Participate in project planning and execution to maximize SQPCE performance, • Act as a company ambassador by marketing and promoting consistent and excellent project implementation, • High school diploma or GED., • 3 years of HVAC or controls services-related sales, • 5 years of building automation and control systems experience or vocational training., • Must have basic experience in Windows or macOS environments, working knowledge of word processing, spreadsheets, e-mail, Web-enabled applications, and database softwarePREFERRED REQUIREMENTS, • Controls service experience, • Bachelor’s Degree, • Must have experience in Windows or MacOS environments, including a working knowledge of spreadsheets, e-mail, and Web-enabled applications., • Calendar Management expertise., • Advanced competencies in computer networking., • Sales and CRM training with documentation, • People-focused, with high energy and a great attitude, • Self-motivated, team-oriented, and able to work independently, • Highly adaptable and able to respond quickly to changing customer demands, • Strong desire to provide excellent customer service with a genuine passion for the company and industry, • Excellent time management skills: able to prioritize, balance urgent vs. important tasks, manage multiple deadlines, and maximize efficiency, • Committed to accuracy, quality, and meeting challenging work goals and deadlines, • Good mechanical aptitude with the ability to read and understand various technical drawings (mechanical, electrical, plumbing, architectural, civil, structural), • Strong problem-solving and reasoning abilities, • Willingness to take on additional responsibilities and manage priorities with minimal guidance, • Exceptional work ethic; upholds company values and demands the highest standard of conduct from self and others, • Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises., • The work environment involves some exposure to construction-related hazards or physical risks, which require following basic safety precautions., • Light physical effort. Requires handling of average-weight objects up to 50 pounds and some standing or walking., • Work requires local and occasional out-of-town travel to job sites and customer locations. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR 3F4JQMtgXK

Job Description Position Title: JANITORIAL DIRECTOR Salary: $80,000 Shift: Monday - Friday Other Forms of Compensation: Bonus ESFM is the corporate facilities management (FM) division of Compass Group USA, a Gold-level Corporate Sustaining Partner of the International Facility Management Association (IFMA), and a Platinum Corporate Member of the Association of Energy Engineers (AEE). ESFM self-performs 80% of all FM services provided to clients. Our portfolio of solution categories includes Facilities Maintenance & Engineering, ESG Programming, Laboratory Support Services, Janitorial & Industrial Cleaning, Landscaping & Grounds Management, Workplace Solutions and Managed Services. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. ESFM’s clients include many household names from the life sciences, technology, oil & gas and manufacturing markets. This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link to apply. Your referral will be able to apply by clicking the link in the email. You can check the status through your profile, accessible via Careers in PeopleHub, by clicking on ‘referral tracking.’ For Employee Referral guidelines, FAQs and the Compass Employee Referral Policy, email . Job Summary Job Summary: At the direction of the Facilities Director, the Mechanical Maintenance Manager will be responsible for providing an array of mechanical related services and supporting the development and implementation of mechanical infrastructure improvement programs. They are to supervise and manage the performance of the maintenance employees, and also manage the client’s expectations. Key Responsibilities: • Ensures the operation and maintenance of all campus mechanical repairs., • Schedules and directs all routine and emergency repairs, plus performs preventive maintenance for associated equipment., • Complies with electrical and building codes by adhering to requirements; advising Facilities Director on needed actions., • Maintains supplies inventory, • Keeps equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs., • Maintains maintenance staff schedules and responsibilities., • Ensures federal, state, and local laws and codes concerning health, safety, and the environment are strictly adhered to in assigned areas., • Performs purchasing and reporting duties, • Participates in the development of short-term and long-term departmental goals and objectives., • Bachelor’s degree or work experience equivalent required. BSME/BSEE/BSEM preferred., • Certifications in any of the following are highly preferred: electrical, HVAC or plumbing., • Strong knowledge of a wide variety of central heating, cooling, and combined heat and power (CHP) plants and HVAC systems and their optimization., • Minimum of five years of experience with progressive levels of responsibility in the performance of detailed energy audits, and project management services, including scope development and analysis reporting., • Experience in educational institution highly preferred., • Leader who is visionary with strong management, planning and communications skills., • Must have the ability to see and understand the inter-connections between various operating units., • Excellent interpersonal skills., • Excellent written & verbal communication skills., • Excellent customer service skills with a quality attitude., • Public speaking skills., • Ability to multi-task and establish priorities and meet deadlines., • Ability to maintain organization in a fast paced, changing environment., • Valid driver’s license required. Apply to ESFM Services today! ESFM is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Eurest Services maintains a drug-free workplace. Associates at ESFM are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Req ID:1488325 ESFM Brandy Wilson

Job DescriptionDescription: Concentric is the first national industrial power services organization delivering forklift and critical power and maintenance solutions that ensure uninterrupted, sustainable facility power. The company’s signature solutions, GuaranteedPOWER® and PerpetualPOWER® are industry firsts, improving reliability, sustainability, and safety to solve the power problem for facility leaders. Concentric helps data centers, distributors, manufacturers, utilities, communications infrastructure and more develop resilience in their power systems while making the energy transition with less risk. With a national network of service professionals, Concentric provides engineering, installation and maintenance/management for power equipment including backup batteries, UPSs, generators, energy storage, micro grids, forklift power, onsite maintenance and more. Job Summary The Technician, Level 3, HVAC Mechanic is responsible for delivering and installing HVAC telecommunications equipment. The Technician, Level 3, HVAC Mechanical Senior will load, deliver, and install equipment to a variety of customer sites for emergencies or scheduled events. They will provide professional, respectful service while performing work and/or solving on-site challenges. This position reports to the Regional Service Manager, Critical Power Operations, and has no direct reports. *The travel expectation for this position could extend up to 2 weeks at a project site, then returning home for a period of 1week before travelling again - Company vehicle will be provided for assigned territories. Key Job Responsibilities • Reliable attendance and punctuality., • Deliver and install telecommunications HVAC equipment., • Ensure all work is performed according to safety regulations and building codes., • Review mechanical and technical manuals and project specifications to understand project requirements., • Develop detailed work plans and timelines., • Estimate material needs and procure necessary equipment., • Conduct pre- and post- inspections to verify quality and compliance., • Conduct regular quality checks throughout the project., • Troubleshoot mechanical problems and identify solutions., • Maintain detailed project documentation including progress reports, work orders and inspection reports., • Coordinate problem resolution with Technical Support, Customer Service, Sales, and other personnel to expedite repairs., • Track activity and progress by communicating job notes and updates with your team., • Prepare necessary reports for project management and clients., • Travel to other branches or sites, as required, to assist with product installation, removal, or repairs., • Implement quality control measures to ensure project standards are met., • Proactively identify and address potential quality issues., • Conduct regular quality checks throughout the project., • Other duties as assigned by supervisor. Key Performance Measurements • A score card that reflects performance in areas such as safety, efficiency, work order completion, customer satisfaction, and issue resolution., • Exercise high degree of time management skill, resulting in greater than 90% time billable to customers., • Management observation regarding attitude, diligence, team contributions, and willingness and ability to learn new skills and information., • Other key performance indicators as assigned.Requirements:, • High school diploma or GED equivalent, required., • Must have 5-7 years of HVAC mechanic experience; preferred commercial and/or industrial., • Should also have experience operating heavy equipment, as well as towing a trailer using a service truck., • Certification from a technical school focused on Journeyman HVAC/Mechanical, preferred., • Must have a valid driver’s license, pass a background check, and drug screen., • May be required to pass additional requirements under the Department of Transportation (DOT)., • Possess general knowledge of safety regulations and compliance requirements., • Strong desire to deepen expertise in HVAC diagnostics, service, and responsibilities, taking on more complex challenges with each year of employment., • Working knowledge of HVAC machines and tools, including the designs, uses, repair, and maintenance., • Familiarity with the use of test equipment e.g., Digital Variable Multi (DVM), and refrigeration test equipment., • Strong organizational and multitasking abilities., • Ability to organize their own work and work independently, with limited supervision., • Proficiency in Microsoft Office and Microsoft TEAMS platforms., • Ability to work with individuals from diverse backgrounds and with diverse needs, and across remote offices., • Ability to clearly articulate ideas (both written and verbal) to both internal and external customers and to listen effectively to customer needs., • Ability to develop and maintain strong workplace relationships., • Possess a keen eye for detail, and the ability to work in a fast-paced environment., • Ability to work collaboratively with other departments., • Willingness to work flexible hours, including weekends and holidays., • Requires heavy travel, some evening, weekends and overnight travel. *This job description is subject to change at any time. Benefits At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading benefits: • Competitive pay – Plus incentive opportunities and overtime potential for our hourly employees!, • Three medical plan options with employer premium contribution that start on day one., • Employee paid dental and vision insurance that starts on day one., • Health Savings Account (HSA) with company contribution on eligible High-Deductible Health Plans (HDHP)., • Medical and dependent care Flexible Spending Accounts (FSA) available., • Company-paid life and AD&D insurance, short-term and long-term disability coverage that start on day one., • Company 401K plan with 100% match on the first 4% of employee contributions., • 8 paid holidays., • Full-time Employees receive a total of 128 Hours of Paid Time Off (PTO) Annually., • We offer employee paid accident, critical illness, and hospital indemnity insurance., • We offer employee paid legal plans, identity protection, pet insurance, and home & auto discounts., • Training and mentoring – Learn from our experts in the industry. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand up to 8 hours; use hands to type, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings due to conditions existing in the work environment. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in a customer facility location, including indoors and outdoors. The noise level in the work environment is moderate to heavy requiring hearing protection when visiting customer locations. The Concentric Company is an equal opportunity employer and does not discriminate based on race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), gender identity or expression, parental status, national origin, age, disability, genetic information (including family medical history), veteran or military service, or any other legally protected status. #LI-hybrid #LI-ED1 #LI-Elsa

Job DescriptionSalary: Company Mission Statement: To build up our communities, our clients, and each other by building trust in everything we do. Summary/Objective: Promotes the company mission statement by working with the project manager to coordinate planning, scheduling, and construction of projects. Objectives include meeting the owners, designers, and Harpers safety, schedule, budget, and quality goals. Assigned project responsibilities include, but are not limited to: safety, quality, and production. May work on standalone projects or under the direction of a site Superintendent on a multi-facet project. Essential Functions: • Examine and inspect work progress, equipment, and construction sites to verify safety and ensure that specifications are met., • Promote and enforce safety first and foremost. Look for potential safety issues on the project. Stay current on safe work practices and OSHA standards. Hold all employees accountable for practicing and enforcing safety. Ensure Pre-Task Planning sheets are completed daily and signed for safety., • Be the foremost technical authority on the project., • Plan, schedule, and coordinate with Trade Partners. Coordinate efforts with Foreman and Crew. Review project plans and specifications to verify accuracy and new developments., • Work with the project team to develop a project schedule. Project equipment needs and monitor rentals. Understand and utilize all internal resources available. Clearly express to the project work force the project goals and expectations., • Do take-offs of formwork and ensure that form materials are on the project when needed., • Order small tools and expendables (i.e., nails, saws, drills, wall ties) in advance and assure that they are available when needed., • Monitor job. Maintain good relations with the owner. Administer Company policies and procedures., • Project labor requirements, interview, and recommend personnel for hire as needed. Motivate the work force; reward employees for good work; and take appropriate measures when work is mediocre., • Initiate formal and informal feedback conversations. Initiate conversations regarding the workers future and goals within the company. Train employees. Handle employee concerns and complaints regarding conflicts and performance. Immediately address all quality or production issues., • Confer with supervisory and engineering personnel and inspectors and suppliers of tools and materials to resolve construction problems and improve construction methods including but not limited to design, lack of productivity, and work interfaces., • Inspect work in progress to insure consistency in workmanship., • Maintain a high level of professional ethics and demand the same of all employees. Competencies: • Scheduling., • Ability to understand material delivery dates and when they are required., • Demonstrate ability to understand conflicts regarding design., • With Trade Partners., • With Arch/Engineers., • Knows when to RFI an issue or resolve effectively., • Demonstrate willingness and some ability to run a Trade Partner coordination meeting., • Includes setting an agenda and maintaining the agenda., • Understand critical issues for meeting., • Run the meeting effectively., • Attend all OAC meetings., • Includes assisting in setting an agenda and maintaining the agenda., • Assist in critical issues for meeting., • Assist in running the meeting effectively where required., • Become proficient at solving clashes and conflicts of building systems in a manner that does not compromise the engineered basis of design., • Also show the ability to understand when documentation is required related to drawing and specification updates and/or cost impacts., • Demonstrate ability to develop and manage a QAQC program., • Demonstrate some ability to supervise a project utilizing BIM technologies., • Coordinate a 3D design for conflicts., • Coordinate a 3D design layout in the field., • Utilize BIM Glue and Navisworks software when appropriate to assist in the BIM process on a project., • OSHA 30 certified., • Proven track record of a strong safety culture on the jobsite is a leader in safety., • Has experience building from the ground up on more than 1 project as a Superintendent., • Some understanding of construction means and methods for all scopes of work., • Understand the importance of communicating and developing relationships with City, local agencies and utility representatives., • Demonstrate an understanding of:, • Plans., • Specs., • Demonstrate the ability to lead the jobsite to include:, • Harper personnel., • Trade Partners., • Demonstrate flexibility and accept change often., • Must be detail oriented., • Supervise multiple tasks and meet deadlines consistently., • Able to solve complex issues., • A Can Do attitude., • Read and understand people and their intentions., • Can build relationships with project teammates and Trade Partners. Supervisory Responsibilities: Superintendent shall supervise all Trade Partners, consultants, and vendors daily. This supervision shall ensure adequate manpower is available for each task and compliant work performed. This position shall be responsible for monitoring project security personnel. Superintendent shall supervise all Assistant-Superintendents. Work Environment: While performing the duties of this Job, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and risk of vibration. The noise level in the work environment is sometimes loud. Physical Demands: • The Superintendent is required to work in a variety of conditions relative to construction jobsite environments and must be able to perform the physical requirements of the job, as assigned., • Weather and climate conditions will vary throughout the progress of a project and the superintendent must be able to inspect all ongoing construction activities over the duration of the assigned project., • This role requires walking over varied terrain, climbing, stooping, bending, and lifting. Lifting requirements vary from minimal loads to heavy; but help is always available with heavier loads., • Inspection for quality, consistency and completeness of work frequently requires climbing ladders, stairs, and scaffolding., • Driving a company-owned vehicle is required to perform the duties of a Superintendent. The Superintendent is required to have a valid state-issued license, a satisfactory motor vehicle record, safe driving behavior, and must adhere to our Driving and Truck Policy. Travel Required: Travel to/from multiple jobsites, projects, and offices. Little overnight or weekend travel. Education and Experience: • Minimum 4 years of jobsite supervision experience., • This includes working as an Assistant Superintendent or Foreman., • Experience with Harper may be a plus., • Office experience of Microsoft office (Excel, word, project & Outlook) is also preferred. Benefits: • Competitive Benefit Package, • 401(k), • Transparency in growth, pay, etc., • Community involvement., • Career advancement., • Performance feedback., • Teambuilding events. Additional Eligibility Requirements: None Work Authorization/Security Clearance Requirements: Authorized to work in the United States. Affirmative Action/EEO statement: Harper provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Harper complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Other Duties:Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionJob Title: Mechanical AssemblerJob Description The Mechanical Assembler is responsible for assembling components in line with engineering and quality standards to satisfy customer requirements and expectations. Collaborating with Machine Operators and Warehouse associates, the Mechanical Assembler ensures production targets are met while maintaining a clean and organized workspace. The ideal candidate should possess strong communication skills, basic mechanical assembly experience, and the ability to thrive in a fast-paced environment. Responsibilities • Perform day-to-day operational production assembly tasks such as building and assembling housed bearing assemblies., • Work cross-functionally with other assembly and value-add departmental operations., • Operate basic machinery functions., • Process inventory and raw materials throughout the department., • Perform all work in accordance with quality standards and established safety procedures., • Maintain a safe and clean working environment by complying with procedures, rules, and regulations.Essential Skills, • Strong communication skills, • Ability to lift 50-60 lbs, • Proficiency in using basic hand tools, • High School Diploma or equivalent, • 1+ year of warehouse or assembly work experience, • Ability to interpret and understand technical drawings and terminologyAdditional Skills & Qualifications, • Experience with mechanical assembly Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlotte,NC. Application Deadline This position is anticipated to close on Jan 22, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are seeking a dynamic and experienced General Contractor Construction Superintendent to join our team and play a crucial role in ensuring the successful execution of construction projects from inception to completion. Estimated Start Date: About Us In 1999, armed with an Electrical Engineering degree, 14 years of business experience with Hoechst Celanse and a restless entrepreneurial spirit, Francisco Alvarado decided to embark on a new venture and Marand Builders, Inc was established. Since the conception of Marand, our goal has been to understand the individual needs of our customers and provide them with a customized solution. We have built our reputation on reliability, attentiveness, and quality of execution. We succeed when we have provided our clients with the best construction experience. We started in Charlotte, NC, but rapidly expanded to cover the Carolinas, Mid-Atlantic and Southeast US regions. We have 7 regional offices in Virginia, North Carolina, Georgia, and Florida. Our team of highly talented professionals has allowed us to become a preferred vendor with many of our clients, exceeding 95% repeat business. Marand specializes in serving the healthcare, financial services, commercial / administrative and light-industrial industries. Our ideal candidate will have: • A bachelor’s degree in construction management, engineering, or a related field, or equivalent work experience, • At least five years of experience in the commercial construction industry, overseeing all aspects of ground-up projects in healthcare, financial, and light industrial sectors., • Strong leadership, communication, and interpersonal skills, with the ability to manage multiple teams, subcontractors, and stakeholders, • A Construction OSHA 30 within the last 5 years or ability to renew, • Proficient in project reporting software, MS Office, and blueprint reading, • Knowledge of building codes, safety regulations, and quality standards, • Problem-solving and decision-making abilities, with a proactive and results-oriented approach, • A valid driver’s license and the ability to travel to various job sitesRequirements, • Leadership: individual needs to have the ability to supervise and lead the team., • Organization: individual should be able to schedule and supervise multi-tasking work of a multi-member team., • Experience: individual should have required and proven knowledge in commercial building and construction and related sectors., • Scope of Work: individual should have experience with running all aspects of large commercial projects from inception to full profitable completion, to including the following: large ground up projects, interior renovation projects of all sizes, finish work, and all relocation and replacement work on project sizes in the $2M+ valuation range., • Safety: A Superintendent Level 3 is required, at a minimum, to possess a valid OSHA 30 card at all times while working on Marand projects., • Problem-Solving: individual should have and demonstrate good problem-solving skills., • Communication: individual should possess and demonstrate excellent communication skills not only with team members, but also with the Project Management and the Customer., • Computer Skills: individual needs to be computer literate and should have basic computer knowledge and experience in the use of Microsoft Office and Procore software., • OSHA-30 Hour Training Required as well as recertification every 5 years per Marand policy, • The successful Construction Project Superintendent should have the minimum of a High School Diploma. A Bachelor’s Degree from a 4-year College or University or an Associate’s Degree from a Vocational School is a plus., • A minimum of five to ten years’ experience “on the job” is required., • Enforcing safety compliance (OSHA and Marand safety plan and policies) and advocating for safety is the number one priority., • Supervise the construction effort in the field to ensure that the project is completed in accordance with design, budget, schedule, and customer objectives., • Conduct weekly on-site meetings with subcontractors, vendors, and others as appropriate with respect to schedule safety issues, and other matters relating to performance in the field., • Enforce compliance with all project procedures, safety program requirements, and work rules., • Supervises and ensures the health and safety of the workers by enforcing all company, state, and federal guidelines., • Prepare and distribute field reports in a timely manner (i.e., daily superintendent’s reports, safety reports, etc.)., • Completion of punch list items in a time frame consistent with the customer’s requirements and the project budget. Procore for punch list management, • Monitor and direct subcontractor’s progress and ensure manpower is adequate to meet project schedule and customer expectations., • Prepare as necessary subcontractor work schedules and provide input to the Project Manager in preparing and updating project construction schedules to jointly ensure timely completion., • Verification of all layouts and/or checking of layout by subcontractors and the establishment of initial control lines and grades., • Respond with clarity to subcontractors with respect to questions regarding the project documents and their work. Provide documentation and coordinate with Construction Manager as appropriate., • Participate in pre-construction planning, including logistics, means and methods, bid and scope reviews, and project estimates., • Maintain an up-to-date set of contract documents on site., • Ensure that the subcontractors are maintaining record drawings (“red line as builts”) during construction., • Responsible for the organization, establishment, and maintenance of the on-site field office to project a professional image (organized, clean, signage, etc.), • The timely communication with the Construction Manager on matters regarding financial issues, safety, construction progress, labor issues, material problems, quality, code issues, etc., • Interface and work harmoniously with respective Project Managers and other personnel., • Manage, oversee, provide training, and act as a mentor to other Superintendent levels., • Work in harmony with other Superintendents that may be assigned as part of a team on larger projects., • Continue education in areas including OSHA and safety, means and methods, codes, management skills, new technology, etc., • Maintain current Red Cross First Aid and CPR certification., • Maintain a current working knowledge of the permit process in those communities where performing work and communicate information on changes to the office., • Ensures overall cleanliness of the jobsite to Marand’s standards.Physical Demands:, • This position involves work at a construction site where duties will be performed both indoors and outdoors, • Working hours may be extended to meet project deadlines, • Ability to work night shifts, • Dexterity of hands and fingers to operate a company iPad, phone, and other business machines, • While performing the duties of this job, the employee is regularly required to sit, stand and walk. Generally, the job requires 20% sitting, 40% walking, and 40% standing., • Includes crawling, standing, stooping, bending, crouching, kneeling, sitting, reaching. Physical work is a primary part (more than 70%) of the job, • Talk or hear, • The employee must occasionally lift and/or move up to 50 pounds Powered by JazzHR MWxIsbkBlj

Job Description JOB SUMMARY McKenney’s is the Southeast’s most trusted name in facility construction, operation and maintenance. For over 75 years, our proven approach has ensured high-quality, energy-efficient solutions at every stage of a building—Design, Build, Controls & Monitoring, and Maintenance & Repair. We offer expertise in HVAC, process piping, plumbing, and building automation and control systems, as well as service and maintenance. We have our own in-house engineering, fabrication, installation and commissioning resources to ensure cost-effective delivery of the highest quality solutions. Our Controls Install Technicians are instrumental in supporting our Installation teams in building long-term customer relations, solving problems, and making recommendations to improve customer systems. They will assist in developing, building, testing, and commissioning building systems such as HVAC, lighting, power, and monitoring. DUTIES & ESSENTIAL JOB FUNCTIONS • Lead and assist teams of installers in developing, building, testing, and commissioning building control systems., • Uphold controls installation standards and best practices for current systems and methods, • In-depth level understanding of all mechanical systems in the buildings we serve, • Provide job leadership to other install team members and lead the installation efforts on jobs., • Diagnose and repair controls systems malfunctions, • Ability to read and understand wiring diagrams, control drawings, and mechanical drawings, • Expertise in network layout, communication wiring and troubleshooting, panel building and wiring, safety interlocks, and VFD wiring,, • Respond to BAS emergencies during off-hours if necessary., • Prepare documentation and reports on work status and completion., • Must complete Pathway and pass performance checkout, as well as hold the role for a minimum of 18 months, until you can progress to Senior Controls Install Tech. BASIC QUALIFICATIONS • At least 5 years of experience working in an installation-type role for a systems manufacturer or authorized systems representative/supplier/vendor on communicating or networked electronic systems., • Experienced knowledge of controls installation standards and methods, electronics, logic, and systems design for various system types, including Pneumatic, Electric/Electronic, Digital, and Analog, and Direct Digital Control (DDC), • Must have basic PC experience in Windows environments and knowledge of word processing, spreadsheets, e-mail, web-enabled applications, and database software., • Ability to read and understand wiring diagrams, mechanical drawings, and schematics, • Bachelor’s degree in a related field OR equivalent certification, • Ability to read and understand mechanical, electrical, network, and wiring drawings., • Ability to manage professional e-mail communications, • Ability to manage and maintain a calendar and task management systems, • Ability to present a professional, positive, and helpful attitude always., • Must possess and maintain an exceptional work ethic and timeliness, • Must uphold company values and demand the highest level of conduct from self and others, • Work involves moderate exposure to elements, such as hot/cold temperatures, dirt, dust, and/or loud noises., • Work environment involves moderate exposure to construction hazards or physical risks, which require following basic safety precautions., • Moderate physical effort. Requires handling of average-weight objects up to 50 pounds and extensive sitting. Some walking and standing. Moving Safety Forward, our initiative for continuous improvements in our safety culture, reminds us that we are on a journey toward a zero-incident culture. In all we do, we must work to build a partnership with our employees, customers and business associates that empowers them all with the ability to do their jobs safely. McKenney’s is an Equal Opportunity Employer committed to workforce diversity. Qualified candidates will receive consideration without regard to age, color, religion, sexual orientation, disability, national origin, or gender identity. McKenney’s is a smoke-free and drug-free workplace. Powered by JazzHR vnLuh8HTLm

Job DescriptionSalary: $17.00-$19.00 D.O.E. Since 1963, through the relentless commitment of our talented team members working together to achieve success, Fessler & Bowman, Inc. has grown to become an Engineering News-Record Top 100 Specialty Contractor and Top 20 Concrete Contractor in the U.S. Our Culture & Philosophy: Fessler & Bowman is a fast-paced, culture-focused industry leader in specialty concrete and civil earthwork. When we talk about culture at F&B, it is not just a plaque hanging in our lobby. Our values are our driving force, and they have allowed us to build a phenomenal team that delivers best-in-class products to our customers. • Open & Constructive, • Take Pride in Our Product, • Relentless Commitment, • Care About Our Customers, • Team Success Summary: Laborers for Fessler & Bowman will perform a variety of tasks that aid our skilled workers in the completion of projects. It is crucial to have the skills necessary to work as a valued team member for F&B to provide the type of service our customers have come to expect. To perform this position sufficiently, the employee must be able to perform the following duties satisfactorily. The below descriptions represent, but do not limit, the duties expected of this position. Essential Duties & Responsibilities: * Digging trenches, holes and ditches * Mixing concrete • Staging, organizing and cleaning up work sites, • May operate hand and power tools, • Load and unload equipment, clear work areas, and transport materials, • Other duties to be assigned Education, Experience & Qualifications: * Prior concrete experience preferred * Willingness to learn and follow all safety policies and requirements * This position requires climbing, kneeling, bending and crawling often as well as the ability to work on ladders, platforms and mechanical lifts * Must be able to understand English * Must be able to lift up to 75 lbs. * Valid Drivers License required Travel: Travel may be required for this position as the employee must be willing to travel to surrounding job sites. F&B will compensate a per diem for travel and overnight stay if applicable. Work Environment: As a Laborer, you will be subject to various work environments. Environments include but are not limited to the following: high/low temperatures, areas close to traffic, loud and frequent noises, confined spaces, heights, indoor/outdoor settings. Benefits: Fessler & Bowman is proud to provide non-union Team Members with the following benefits: • Medical, dental and vision insurance, • 401k with company contributions Fessler & Bowman Team Members that are part of a union will receive benefits from the appropriate union. Recruitment Process: The recruitment process will include a phone-screen, in-person meeting and a pre-employment background check and drug test. Fessler & Bowman is an Equal Opportunity Employer

Job DescriptionSolve Industrial Motion Group strives to be the trusted source for engineered bearings and power transmission solutions. Supported by a diverse range of products within Solve’s brand portfolio and our unmatched technical expertise, we have over 100,000 ready-to-ship components. At Solve we innovate with ambition, offering custom solutions in a wide range of applications. We obsess over our customers, leveraging our nationwide network for industry leading product availability, and best-in-class customer service. Our engaged team leads with integrity, and unites with purpose, driving toward innovation and continuous improvement every day. POSITION DESCRIPTION: Reporting to the ReWork Supervisor, the Mechanical Assembler is responsible for assembling components based on engineering and quality standards that satisfy our customer’s requirements and expectations. Working in tandem with the Machine Operators & Warehouse associates, the Mechanical Assembler will ensure production targets are met, while always maintaining a clean and organized workspace. The ideal candidate will have strong communication skills with basic mechanical assembly experience and thrive in a fast-paced environment. RESPONSIBILITIES: • Perform day-to-day operational production assembly tasks such as build/assemble housed bearing assemblies and relevant functional assembly manipulation, • Work cross-functionally with other assembly and value-add departmental operations, • Basic machine operating functions, • Inventory and raw material processing actions throughout the department, • Perform all work in accordance with quality standards and established safety protocols, • Maintain a safe and clean working environment by complying with procedures, rules, and regulationsQUALIFICATIONS:, • High School Diploma, or equivalent, • 1+ year of warehouse or assembly work experience, • Ability to lift, push & pull up to 50 lbs, • Ability to use basic hand tools, • Ability to interpret and understand technical drawings and terminologyOUR EMPLOYEE VALUE PROPOSITION:, • Market competitive benefits package, including company-sponsored health coverage, life insurance, 401(k) plan with company match, paid paternal leave and paid time off, • Work in a collaborative environment with passionate and innovative teammates, • $85 annual bonus applied toward mandatory steel toe bootsSolve is proud to be an Equal Opportunity Employer and prohibits discrimination or harassment of any kind. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, pregnancy, national origin, ancestry, citizenship status, age, marital or partnership status, sexual orientation, gender identity or expression, disability, genetic predisposition, veteran or military status, status as a victim of domestic violence, a sex offense or stalking, or any other class or status in accordance with applicable federal, state, and local laws. Powered by JazzHR fH02IDWDLG

Job DescriptionGreat Opportunity with Growing Mechanical Contractor - 401k Match + BONUS!! This Jobot Job is hosted by: Matt Lopez Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $60,000 - $130,000 per year A bit about us: Serving HVAC clients in North and South Carolina, we are known for the highest-quality custom heating and cooling systems, abundant ingenuity, attentive service, and competitive pricing. An MWBE-certified company, we maintain a core team of highly trained engineers, project managers, superintendents, and technicians who can satisfy your most complex specifications. Our customers find that we are both highly resourceful and responsive, bringing them back to us project after project. Why join us? 401(k) matching Dental insurance Health insurance Life insurance Paid time off Retirement plan Vision insurance Bonus opportunities Job Details • Responsible for estimating mid-to-large commercial and institution HVAC projects., • Responsible for equipment, material and subcontractor buyouts, • Work with Superintendents and Project Managers to ensure bids are accurate, • Responsible for getting all bids submitted within required deadlines, • Maintain a working knowledge of HVAC and construction standards, • Read, understand and use provided plans and specifications to determine accurately estimated cost of jobs, • Use company estimating tools to provide consistent estimates HVAC PRECONSTRUCTION ESTIMATOR PERFORMANCE EXPECTATIONS • The Preconstruction Estimator will read all plans and specifications of jobs prior to bidding job and will create accurate cost estimates., • Must be able to negotiate pricing with vendors, • Bachelor's Degree in Construction Management or Mechanical Engineering preferred paired with a minimum of 3 to 5 years estimating large Commercial HVAC jobs., • Familiar with State Building Codes, OSHPD, ASHRAE standards required., • Demonstrated verbal and written communication skills. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionTechnical Assembler 2 Location: Charlotte, NC 28269 Pay: $18-$23 per hour, DOE Schedule: 2nd Shift Job Description We are searching for a Technical Assembler 2 to join our team in Charlotte, NC. In this position, you will assemble products using hand and power tools to position, align, and fasten parts and units into assemblies, subassemblies, or frames. Install wire labels and device tags working with different styles. This position requires that you have a basic understanding of schematics, mechanical and electrical assembly. Job Requirements BASIC QUALIFICATIONS • High School or GED or equivalent, • 1 year of experience working in a manufacturing environment, • Ability to read instructions, safely operate machines and visually inspect components and sub-assemblies being produced, • Ability to stand for long periods of time, • Ability to lift and carry up to 50 pounds on an intermittent basis, • Must be able to read, write and comprehend plant directives written in English, • Limited understanding of PLC, VFD and Circuit Breakers, • Understand and know the differences between NEMA ratings of enclosures, • Knowledgeable in identifying wire gauges, colors and understanding ampacities ADDITIONAL QUALIFICATIONS • Knowledgeable at installing wire labels and device tags, • Able to read and understand tape measures (Metric and Standard), • Able to read and identify colors on wires, • Confident working with hand tools and all power tools with little guidance, • Understand wire gauges, ampacities, and their uses., • Limited understanding of what a PLC, VFD, Circuit breakers etc. are and what their roles are in the control system., • Understand and know the differences between type ratings of enclosures, • Able to work with different styles of wire labels and device tags, • Good Attitude and work ethics, • Have a Mechanical aptitude, • Understand and comprehend tasks presented, • Working overtime as required, • Works well with others and in a team setting, • Basic computer skills About NCW At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company’s purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.

Job DescriptionProduction Manager Job DescriptionOverview Our client is a dynamic, industry-leading organization in logistics and contract manufacturing, is seeking a results-driven Production Manager to optimize manufacturing processes and ensure efficient production operations. This role is crucial for maintaining and enhancing production workflows, resolving issues, and optimizing equipment and processes. Responsibilities • Analyze and evaluate manufacturing processes, identifying opportunities for workflow and quality improvements., • Oversee enhancements to production systems and implement corrective actions in response to operational problems., • Manage and implement preventive measures following root cause analysis of production disruptions., • Direct production teams, coordinating with planning, inventory, and maintenance personnel to ensure adequate materials, documentation, and uptime., • Collaborate with both internal departments and external partners to maintain accurate schedules and supply chain efficiency., • Maintain documentation for all production methods, standard operating procedures, and quality standards., • Support production lead staff in reconciling materials and completing work orders., • Assist quality assurance representatives in maintaining batch records, resolving production issues, and completing investigations as needed.Qualifications, • Experience in manufacturing or a related technical field., • Minimum three years of production management or engineering experience in a manufacturing environment., • Comprehensive knowledge of manufacturing processes, systems, and quality control practices., • Skilled in process optimization and implementation of operational efficiencies., • Experience with electronic and mechanical troubleshooting, including sensors and operational interfaces., • Detail-oriented approach to maintaining high standards of quality and operational efficiency., • Strong problem-solving, decision-making, interpersonal, and communication skills., • Experience in food production, or in related industries, is advantageous. Competitive compensation and benefits

Job Description Why S-E-A? Joining S-E-A means becoming part of a team where your work matters, and your professional growth is a priority. If you're ready to elevate your career and make a tangible impact, we invite you to apply! Essential Job Functions & Responsibilities: • Conduct field investigations and perform failure/accident analysis on incidents involving all types of vehicles and related mechanical equipment, • Conduct vehicular accident reconstruction and mechanical failure analysis as a project lead, • Perform calculations, engineering analysis, computer analyses and simulations, and technical reporting, • Investigate design, safety and failure of machinery and mechanical systems, • Provide technical findings and conclusions in layman's terms, both verbally and in writing, • Maintain professional and technical knowledge by attending educational workshops, • Review professional publications, establish personal networks and participate in professional societies, • B.S in Mechanical Engineering required, Master's Degree preferred, • P. E. registration through testing, • Prior forensic engineering experience, • Vehicular knowledge is required, • NHTSA, Forensic, Racing or Vehicle Safety background is a plus, • Strong written and oral communication skills, • Exceptional interpersonal and communication skills, • Travel and ability to drive to site locations, • Ability to maneuver in and around an accident site, • Ability to lift up to 50 lbs, • Ability to effectively communicate with clients and colleagues, • Continuing forensic training, • Medical coverage, • Dental & vision coverage, • 401(k) with company match, • Paid vacation, sick days and holidays, • Company-paid STD, LTD and life insurance, • Tuition Reimbursement Program

Job Description Work for a Machine Tools Industry Leader! Snelling Professional Services has 50 years in business and has proven to build world-leading teams for machine tools OEMs and automation companies. One of our best clients is growing their turning machinery team! We need Engineers and Technicians who will operate, maintain, and service machine tools equipment (lathes) at customer sites. This is a great opportunity to advance your career with a company who offers exceptional long-term career potential. The Machine Tools division needs Technicians and Engineers who are responsible for: • Diagnosing and Resolving Technical Issues: Conduct troubleshooting and repair tasks for basic electrical, electronic, and mechanical problems with machine tools at customer plants., • Providing Operational Support: Offer guidance and support to customers in addressing operation and programming challenges effectively., • Maintenance and Assistance: Perform routine maintenance tasks and provide essential assistance to customers as required., • Tool and Parts Selection: Provide recommendations and aid in the selection and procurement of machine tools and replacement parts necessary for repairs., • Documentation and Reporting: Prepare and submit accurate and timely installation, service, and expense reports electronically., • Technology Proficiency: Stay updated with technological advancements to ensure the proper training of customer personnel., • Collaborative Support: Collaborate with Sales, Engineers, and Project Managers when necessary to meet project requirements., • Client Relationship Management: Cultivate and maintain exceptional customer relationships with all clients to ensure satisfaction and ongoing partnerships. The Ideal candidates will have and will excel with: • Associates degree in Electrical, Electronics or Mechanical Engineering; Bachelors huge plus for career advancement potential!, • Minimum 2 years of hands-on experience with mechatronic technology, • Equivalent combination of education and experience may be considered, • Electromechanical aptitude and skills, • Working experience hands-on with electro-mechanical equipment, • Familiarity with machining tools, milling machines, lathes, and/or CNC machines is a plus, • Troubleshooting lathes or turning machinery, • Ability to use Microsoft Office Programs, • Ability to read and understand equipment drawings and schematics, • Ability to apply concepts of basic algebra and geometry., • Excellent customer service skills, • Must be able to bend, crawl, sit, stand, crouch and lift for extended periods of time. The Machine Tools Team will be rewarded with: • Competitive pay depending on experience, credentials, and role ($62,000-85,000), • Per Diem, • Annual Bonus, • Generous PTO package, • Company credit card for expenses, • Comprehensive benefits package at great rates!, • Medical, • Dental, • Vision, • 401k with match, • Paths for long-term engineering career advancement, • Opportunity to make a major impact, you will be recognized for your success! Must be authorized to work in the United States without sponsorship This Company uses E-Verify to confirm identity and employment eligibility

Job Description 2024 was a Record Sales Year. Our Largest Sales Growth in Decades. 2025 is looking to finish even better. Water Treatment Chemical Service Technician—Charlotte North Carolina Garratt-Callahan () is family friendly, profitable, stable, and fiercely private. No layoffs in 120 years. No ownership changes in 120 years. Haven't changed our commission plan in 30 years. 80 straight years of profitability. We have operations in every state in the USA. Chemical Service Technicians are responsible for sales support by maintaining the existing customer base in the greater Charlotte area. Perform water treatment tests at the existing customers. With the freedom of working from your home, you can work and train in a territory alongside veteran Territory Managers. The best place to live is in or very near Charlotte. The career track for a Chemical Service Technician is to train to become a Territory Manager. Territory Managers are eligible for unlimited commission and a year-end bonus. As a Technical Sales Support/Service Technician, you will receive an industry competitive salary, expenses, benefits, and a $675 per month car allowance. In addition, ample technical support is provided along with continuous training. Paperwork is kept to a minimum. Compensation is based upon experience and the ability to succeed. $65,000 to $80,000 first year base for a qualified candidate. We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Benefits include a corporate 401k, health, dental, vision, and life insurance. Job Responsibilities: • Solve customers' water problems., • Treat industrial boilers and cooling towers to keep them energy efficient and environmentally friendly., • Perform detailed water testing & analyses at industrial sites such as food processing plants, hospitals, manufacturing plants, commercial buildings, and data centers., • Help sell Garratt-Callahan's proprietary chemical blends, equipment, & monitoring technology., • Passivation of stainless steel in industrial water treatment systems., • Help sell corrosion & scale inhibitors, coagulants, flocculants, biocides, bio-augmentation, feed & monitoring equipment, water management plans, reverse osmosis products., • Help sell Water Safety Programs., • Keep our existing customers happy. Garratt-Callahan is a US based private 120-year-old, nationwide water treatment chemical company. Garratt-Callahan treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, technical salespeople in every state, and the Caribbean. Benefits: • We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. A monthly car allowance and travel expenses are provided., • First year compensation is $65,000 to $80,000 depending on experience., • Advanced training, and a clear career path into sales., • Family friendly, flexible hours., • A huge benefit of working for Garratt-Callahan is our stability and low turnover., • No Layoffs in our 120-year history, • G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2. Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Requirements: You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Paper Science, or Water Resources. You must have a 4-year science degree to qualify for this position. You must be a capable Chemist. One-year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in the greater Charlotte area and be familiar with the industrial marketplace of North Carolina. NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at 650.697.5811. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, Global Water, Veolia, us water, Suez, ge water, chemtreat, industrial water engineering, solenis, chem-aqua, kurita, evoqua, fremont, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, Charlotte,, Concord, Gastonia, Hickory, High Point Kannapolis, Salisbury, Monroe, Rock Hill.

Job Description JOB TITLE: Systems Integrator COMPANY: Hoffman Building Technologies STATUS: Full Time, Non-Exempt (Eligible for overtime) Job Purpose: Commissions/integrates DDC systems by following commissioning procedures and guidelines. Essential Duties and Responsibilities: • Organizes commissioning projects by accepting projects from project management; analyzing, • commissioning workload timelines; understanding project requirements, sequence of operation,, • programming and system type; conferring and collaborating with other members of engineering, • and programming team., • Directs electrical subcontractors by prioritizing areas of completion; answering questions to ensure proper installation; enforcing proper installation methods verifying proper installation., • Completes commissioning projects by organizing, prioritizing and scheduling start-up assignments; coordinating with programming for needed modifications and corrections for DDC and Displays; organizing turnover to Project Manager for project close-out; following up on work results., • Communicates project information by updating Project Managers and Construction Coordinator as to construction progress; updating any project deadline information; advising as to any changes in schedule or change orders; logging daily work in a project manual or work diary., • Achieves financial objectives by cooperating with Ops management team in reviewing monthly job labor cost reports as needed; initiating corrective actions as directed., • Ensures proper system operability by assisting in an on-site performance verification (“Big Picture Checkout”) with the HBT engineer to verify the system is functioning as it was designed., • Maintains industry technical knowledge by attending approved educational workshops; reviewing industry publications; reviewing Dealer Intranets; maintaining knowledge on proper electrical and mechanical installation methods; reviewing product specifications and catalogs on project material. Understands various integration platforms such as Field server and Tridium. Also proficient with BACnet, MODbus and LON and can use troubleshooting tools, called “sniffers” to tune communication between various devices (Wireshark, Modscan,etc.), • Maintains project documentation by: updating Gray Book for wiring diagrams and sequence changes; maintaining project commissioning sheets; collaborating with Project Managers and Programmers to assure that current documentation is accurately and promptly transmitted from the field. EEO Employer/Vets/Disabled

Job Description Application Engineer Hiring in: Charlotte ProSearch Recruiting Partners, an independent franchise of the MRINetwork that specializes in hiring factory automation OEMs and integrators, is hiring for a leading manufacturer of automated material handling solutions. This position is an excellent career advancement opportunity to move into a senior-level title. The company is seeking an experienced Applications Engineer to provide technical expertise in CNC machine programming, process optimization, and turnkey project execution. The Applications Engineer will be responsible for the following day-to-day activities: • Support the fulfillment of CNC machine sales projects by ensuring machines meet operational and quality requirements, • Install and qualify tooling, work-holding systems, measuring probes, and peripheral components for turnkey projects and demos, • Create CNC programs manually and/or with CAD/CAM software, • Set up machines and validate processes to ensure compliance with customer quality and cycle time requirements, • Conduct acceptance runoff tests with customers at company and customer sites, followed by operator training sessions, • Travel to customer facilities for installation, process validation, troubleshooting, and training (domestic and international), • Collaborate with engineering, project management, and proposals teams during kickoff meetings to review project details and tooling requirements, • Troubleshoot machining processes for surface finish, chip control, tool life, and loader program issues, • Configure process-specific automation, parametric programming, tool monitoring, and redundant tooling as needed, • Maintain detailed project schedules and ensure deadlines are met The Applications Engineer will have the following experience: • Associate degree in Mechatronics, Automation, Machine Tool Engineering, or related technical field, • Effective minimum qualification: 2+ years total experience across key areas (installation, programming, and setup), 2+ years CNC machine installation and deployment, 2+ years programming experience, 2+ years machine setup and configuration, • Strong preference for sheet metal experience and exposure to CNC cutting operations, • Proficiency in Fanuc controls and CAD/CAM software, • Proficiency with Microsoft Office (Outlook, Excel, Word, PowerPoint), • Familiarity with GD&T, tooling selection, and process optimization, • Excellent troubleshooting skills for both mechanical and process-related issues, • Ability to communicate technical concepts clearly to customers during training and support, • Must be willing to travel up to 50% as needed The Application Engineer will be rewarded with: • Salary $80,000.00 - $90,000.00 Salary/year, • Annual bonus, • Profit share, • Exceptional benefits package, • Comprehensive health insurance; excellent medical rates, • 401k, • Paid vacation & holidays, • Company credit card, • Opportunity to work with cutting-edge CNC technology and automation solutions Must be authorized to work in the United States without sponsorship This Company uses E-Verify to confirm identity and employment eligibility

Job Description Drinking Water Project Engineer (Mid-Level) Hazen and Sawyer is seeking a Drinking Water Project Engineer for our Charlotte, NC office. As part of our design and process teams, you will be working on all phases of drinking water / reuse projects. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK. Key Responsibilities: • Your role will include, project engineering/management, design, planning, operational support with a focus on water reuse and drinking water projects, • Supporting proposal development., • Mentor junior drinking water staff., • Coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Supporting projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small to medium projects., • Performing planning, studies, design, and support of projects through design, construction, and operation. Required Qualifications: • Bachelor's degree in civil/environmental/chemical/mechanical engineering, • PE license, • 4-12 years of experience in municipal water treatment, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Must be capable of presenting complex issues to nontechnical people Preferred Qualifications: • Advanced degree (Master’s) in Civil/Environmental/Chemical/Mechanical Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description TAT Technologies (“TAT”) is a fast-growing profitable provider of aerospace thermal management, power and actuation products and repair services. TAT is a strategic global partner to leading players in the aerospace industry and specializes in providing innovative commercial, defense, OEM and repair/overhaul solutions. Our experience, flexibility, and commitment to meeting customer’s requirements have positioned us to be a trusted partner to some of the world’s leading aircraft manufacturers, OEM’s, airlines, MRO’s, air forces and defense organizations. TAT employs more than 600 employees’ worldwide, with facilities in the US and Israel. The New Product Introduction (NPI) Procurement Specialist will support the successful launch of next-generation Thermal Management System (TMS) products for advanced aerospace platforms, including hybrid-electric, eVTOL, and next-generation conventional aircraft. This role is focused on early supplier engagement, prototype sourcing, and transition to production working closely with R&D, Engineering, Program Management, Quality, and Operations. The NPI Procurement Specialist ensures that suppliers are capable, responsive, and aligned with technical, cost, quality, and schedule requirements as new products move from concept through qualification and into production. Requirements 1. NPI Sourcing & Supplier Engagement • Source and onboard suppliers for prototype, development, and low-rate initial production (LRIP) of TMS components, including pumps, compressors, fans, controllers, sensors, heat exchangers, and liquid-cooled modules., • Support supplier selection during early design phases based on technical capability, responsiveness, cost, and scalability., • Coordinate RFQs, supplier evaluations, and award recommendations for NPI programs., • Support the execution of development agreements, prototypes orders, and early production contracts. 2. Program & Engineering Support • Act as the procurement focal point for assigned NPI programs from concept through production readiness., • Collaborate with Engineering and R&D to translate BOMs, drawings, and specifications into supplier requirements., • Support supplier participation in design-for-manufacturing (DFM), design-for-cost, and value-engineering activities., • Track long-lead items and ensure timely availability of prototype and qualification hardware. 3. Supplier Readiness & Risk Management • Assess supplier readiness for technical capability, capacity, quality systems, and schedule., • Support supplier TRL/MRL tracking and manufacturing readiness reviews., • Identify supply risks early and implement mitigation plans (alternate suppliers, schedule recovery actions)., • Coordinate supplier technical reviews and follow up on action items. 4. Cost, Quality & Compliance • Support cost estimating, price analysis, and should-cost activities for new products., • Ensure suppliers meet applicable aerospace and customer requirements, including AS9100, DO-160, MIL-STD, and program-specific standards., • Partner with Quality and Operations to support first article inspections (FAI) and supplier qualification activities., • Assist in resolving early supplier quality or delivery issues during development and ramp-up. 5. Cross-Functional Coordination • Interface daily with Program Management, Engineering, Quality, Operations, and Supply Chain to support NPI schedules and milestones., • Support handoff from NPI to sustaining/procurement teams at production release., • Maintain accurate procurement data in ERP and PLM systems., • Provide regular status updates on supplier performance, cost, and risk for NPI programs. Professional Experience/ Qualifications • Bachelor’s degree in Supply Chain Management, Engineering, or Business., • 5-8 years of experience in procurement, sourcing, or supply chain roles, with strong exposure to NPI or development programs., • Experience sourcing mechanical, thermal, or electro-mechanical components in aerospace, automotive, or energy industries preferred., • Working knowledge of thermal management systems, fluid systems, or electro-mechanical components., • Familiarity with high-voltage or electrified systems is a plus., • Experience with RFQs, cost analysis, supplier selection, and contract execution., • Proficient with ERP, PLM, and procurement tools., • Highly organized with strong attention to detail and schedule management., • Effective communicator who is able to work in fast-paced, cross-functional environments., • Proactive problem-solver with a hands-on, execution-focused mindset. TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Equal Employment Opportunities – TAT TECHNOLOGIES is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

Job DescriptionDescription: Hadco Metal Trading Co., LLC distributes and supplies metal products including aluminum, stainless steel, carbon, related alloys, and mechanical grade plastics for general engineering, aerospace, and commercial markets. • Do you have 2 years of outside sales experience and are you looking to begin a new career in the metals industry?, • Are you driven, capable of cultivating relationships with purchasing decision-makers to grow Hadco business, and want to make your mark in the metals industry?, • Are you looking for professional growth and committed to learning the metals industry? Hadco Metal Trading is hiring a Junior Outside Sales Representative to grow our Charlotte, North Carolina territory. Role & Responsibilities: * Develop new prospects and interact with existing customers to increase sales. * Develop and maintain relationships with purchasing contacts. * Work closely with inside sales and purchasing to ensure quotes, material, and deliveries meet customer needs. * Maintain current knowledge of industry trends to identify opportunities for company growth. * Investigate and resolve customer inquiries. Requirements: Minimum Requirements: * Minimum 2 years outside sales experience. * Possess impeccable communication skills, as well as organizational and time management skills. * Possess a strong professional work ethic. * Ability to work independently and as part of a team. * Willingness and ability to learn about the metals industry. * High level of self-motivation and awareness. * Ability to handle objections and provide alternatives in the sales process. * Valid and clean driver’s license. What Hadco Offers You: * Base compensation and commission plan. * Growth opportunities with a stable and growing company. * Medical/dental/vision insurance. * Paid vacation, PTO, and holidays. * 401(k) with company match. * 100% paid life and disability insurance. * Company vehicle and necessary electronic equipment. Minority/Female/Disabled/Veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class. EEO IS THE LAW

Job Description Manufacturing Engineer Charlotte, NC Full-time/Permanent Manufacturing Engineering, Strong in SAP, Should have created and updated routings, Bill of materials (BOM), Shop floor experience rotating equipment experience, manufacturing process exp. Job Description • Creates, evaluates, and reviews Manufacturing Documentation in support of the manufacturing process., • Analyzes shop floor inputs (data & findings), design requirements, and manufacturing capability to formulate quality manufacturing engineering recommendations to design engineering., • Manufacturing Engineering support in the preparation of detailed manufacturing information (Routing, Special Tooling Costs, Risks, etc.) for new product, processes, and technology into manufacturing, • Design and manufacture tooling and fixtures to be used in product manufacturing, • Support product quality and improvements to minimize non-conformances (both proactive and reactive) Work Experience • A minimum of a Bachelor’s Degree in a Manufacturing or Engineering related concentration with 2 years of manufacturing experience while possessing intimate working knowledge of Valves, assembly procedures., • The ideal applicant will have 1-2 years’ experience with assembly, mechanics, or related hands-on experience troubleshooting mechanical assemblies., • Provide technical leadership and execution of Manufacturing Safety, Quality, Processes, Technology, and Execution of Product Work scope., • Strong communications and communication skills are extremely important as well as flexibility to work nights and weekends as needed to support urgent customer projects in the factory.Company DescriptionQuest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you.Quest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries.\r\n\r\n\r\nWe are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you.

Job Description Are we the road to your future? We are currently searching for an experienced Natural Gas Project Manager to support our Natural Gas Team. This position may be located in any of our Volkert offices. To be considered for this position, applicants must have, at minimum, a Bachelor’s degree in Civil Engineering or related field (Mechanical, Structural, or Industrial Engineering). The salary range for this position is $75,000 - $130,000, depending upon experience. What you’ll be doing: • Lead multidisciplinary teams in the design and implementation of natural gas infrastructure projects, • Develop project scopes, budgets, schedules, and resource plans, • Manage permitting processes with local, state, and federal agencies, • Prepare and review technical drawings, specifications, and construction procedures, • Ensure compliance with safety standards, environmental regulations, and company policies, • Interface with stakeholders including municipalities, landowners, and regulatory bodies, • Support emergency response and on-call supervision as needed, • Assist in capital and operational budget planning, • Manage vendor relationships, • Mentor junior staff and contribute to training programs What you need to have: • Bachelor’s degree in Civil Engineering or related field (Mechanical, Structural, or Industrial Engineering), • 10+ years of experience in natural gas infrastructure or civil project management, • Professional Engineer (PE) license preferred, but not required based on degree of relevant experience, • Strong knowledge of permitting, pipeline design, and construction techniques, • Proficiency in project management software and CAD tools, • Excellent communication, leadership, and organizational skills, • Ability to travel to project sites and work flexible hours as needed, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license and Real ID, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Kentucky Georgia Missouri Ohio Indiana Illinois Alabama Arkansas Florida Louisiana Mississippi North Carolina Tennessee Texas Utah Virginia West Virginia

Job DescriptionDescription: Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, seven technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. We currently have the following career opportunity available in Charlotte, NC: Electro-Mechanical Systems Engineer Co-op This position will be responsible for developing processes, assembly instructions, and work instructions for the integration of value-added options (chip management systems, high-pressure coolant systems, work holding tables, mist collection units, etc.) and associated equipment on a variety of CNC machine tool platforms. Facilitate installation of new options with Production team and document. Daily responsibilities will require close coordination and collaboration with team members from Production and the Applications Engineering department to develop processes and work instructions to install equipment effectively and in a repeatable manner. This position may be required to occasionally work outside of their normal work schedule. Responsibilities: · Consistently follow and reinforce all safety and work procedures and immediately notify management of any safety or product/process quality issues. · Develop procedures, assembly guides, and work instructions for the efficient and reliable set-up and installation of CNC machine tool platforms and associated options and kits. o The focus of this position is for electro-mechanical and controls systems including documentation of physical installation and integration of mechanical interfaces, hydraulics, and pneumatics as well as electronic control devices, wiring harnesses, connectors, and robotics/automation interfaces. o Take complex and often specialized information and adapting it into a format that is easy to understand; Processes and work instructions must be effective for both factory and field installation. · Perform installations, identify installation hurdles, and work with Production, Service, and Applications Engineering to develop solutions. · Drive Lean Six Sigma philosophies across Production including: o Develop Standard Work for each machine platform and associated options o Conduct time studies o 5S principles in support of an efficient, clean, and safe work area o Leverage Poke Yoke and Visual Management to reduce defects and errors · Create or update detailed drawings of options and designed components using Solid Works CAD software. · Promote and support ISO 9001:2015 certification across the organization: o Conduct internal audits to verify that process are working and identify opportunities for improvement o Lead continual improvement projects to enhance product quality/process efficiency. o Collect and analyze process data and present data in a meaningful way. Propose and track Key Performance Indicators (KPIs). · Perform other appropriate tasks and duties as assigned. Methods Machine is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Requirements:

Job Description Position Overview We are seeking an engineer with growing to advanced expertise in expanded PTFE devices. This role supports and leads product development efforts for components that rely on the unique structural and mechanical behavior of ePTFE. The position ranges from an independent technical contributor at the Engineer II level to project level leadership at the Senior Engineer level. Key Responsibilities • Contribute to or lead the design and development of devices that incorporate ePTFE, including concept generation, prototyping, process development, and design refinement., • Develop and optimize manufacturing processes for ePTFE constructs such as tubes, films, sheets, grafts, and custom structures., • Create and execute material and device level test methods including tensile testing, burst strength, leak testing, suture retention, and permeability characterization., • Support supplier engagement, raw material qualification, and specification development., • Participate in risk management activities including design failure mode analysis and material risk assessments., • Prepare clear technical documentation including design histories, protocols, reports, and regulatory support files., • Work closely with the R&D team, quality, operations, and customers to ensure products meet user needs and comply with relevant standards., • Troubleshoot product and process issues through structured problem solving and data driven analysis. Required Qualifications • Bachelor's degree in biomedical engineering, mechanical engineering, materials science, or a related discipline., • Hands-on experience working with ePTFE materials and processes., • Strong understanding of materials science principles related to fluoropolymers., • Experience in medical device development within an ISO 13485 environment., • Ability to design experiments, analyze data, and propose clear next steps., • Experience with vascular, implantable, or catheter based devices., • Prior exposure to supplier qualification and raw material specification development., • Familiarity with device level risk management activities., • Experience leading technical workstreams or mentoring junior engineers.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, Virginia and the Florida panhandle. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Job Responsibilities: As a Pre-Sales CNC Machinist you will use your technical skills to identify and provide dependable solutions for our diverse customer base. Support and troubleshoot project issues with the Director of Technology. The Pre Sales CNC Machinist will support our formal quotes and escalated customer support situations. The person filling this role is responsible for handling multiple high-level technical tasks that surround the use and implementation of CPQ, RFEQ, and CNC Machine options of complex parts, and working with multi–Axis CNC Machines. The candidate will also work with Sales, Pre Sales, and Engineers to generate quotes for customers. Must be flexible to work on multiple tasks at one time. What You Will Contribute: * Provide council to sales regarding machine lineup * Provide technical and commercial information required to complete machine quotes * Act as central knowledge base and information depository for machine accessories and tooling * Maintain broad knowledge of available machines and accessories * Possess specific knowledge of the machine tools represented by the company and the accessories and tools to enhance their operation, process and output * Develop new and maintain existing quotes (supporting documentation) * Provide solutions to outlined problems and needs of sales department * Develop custom proposals and solutions for customers (sales) * Collaborate with customers on projects (contracted development projects) * Request RFEQ, and CPQ from Okuma * Work with sales team and the VP of Engineering on technical reviews weekly * Assist Engineering department with pre and post sales technical assistance * Collaborate with internal R&D team to drive core product growth * Provide technical support to existing customers of Morris South * Document engineering systems files for customers * CAD/CAM for machining proposed parts to arrive at part strategy as well cycle time development Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications & Competencies: * * A.S in Mechanical Engineering or 10 years of related field service * 8-10 years’ industry experience as a CNC Programmer, Manufacturing Engineer, Applications Engineer, or service tech etc. * 8-10 years Microsoft Office Experience * Experience with CNC machining, part programming and knowledge of the manufacturing industry * Cross functional team collaboration * Exceptional written and verbal communication skills (word, excel, power point) * Pragmatic problem-solving skills What’s in it for You:We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: * Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution * Tuition reimbursement * Employee appreciation events and perks * Employee Assistance Program Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged periods of time. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition # 1357B

Job Description Senior Electrical Estimator - Charlotte, NC Our client is an established Electrical Contracting Firm that is a leader in the Data Center / Mission Critical Facilities Market. They build mission-critical facilities for data center facilities nationwide for Enterprise, Colocation and Hyperscale Companies. They provide electrical contractors, journeyman electricians, foremen, designers, electrical commissioning, operations / maintenance, and management expertise for their clients' critical power needs. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The Senior Electrical Estimator will support projects and will collaborate with other Estimators, clients and suppliers to prepare and complete bid / submittals for electrical construction projects. This role will follow company standards and strategy for pursuing estimates that fall within company's parameters. The candidate will have overall responsibility for the delivery of estimations for customers on time and in line with project scopes that meet quality meet Company Design Standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back-office work. Responsibilities: • Develop accurate and timely electrical construction estimates on which we base competitive bids and proposals for our client-base of General Contractors, Owners, Developers and end-users, • Determine and price value-engineered alternatives to plans and specifications, • Perform budget pricing from schematic drawings and narrative, • Draft scope letters, proposals and vendor solicitations, • Attend job walks; pre-bid meetings; collaborations and conferences with clients and design professionals, • Follow Best Practices for the Estimating Department, • Development and maintenance of computerized estimating programs and databases, • Follow company standards for estimating electrical design / build and plans and specs work. Compile final bid packages for review by Executive and Project Teams, • Review estimates created by others for accuracy and completeness, • Perform job handoffs from estimating to operations through clearly demonstrating detailed scopes of work, specifications and job specific conditions., • Follow procedures for the preparation of estimates for modifications and additions, • Prepare of estimates in accordance with the approved procedure for all phases of the works from the agreed engineering deliverables to the appropriate level of accuracy, • Prepare rationale statements to support the estimate identifying areas of weakness and or areas of risk., • Carry out validation and verification of the estimates using high level norms and by comparing with previous estimates, outcome costs and vendor prices, • Lead estimating team, lead estimating team meetings, and assist when needed in training, developing, of jr staff of estimators qualified to carry out departmental and project needs., • Review contractual documents and modifications to determine scope of work and scope of changes., • Assists project management with preparation of schedules for estimate preparation, review, and publication, • Develops forms, formats, and procedures to improve the quality of work produced in the Department, • 3-7 years of estimating and preconstruction bid experience of large electrical projects, • Knowledge and proficiency with Code requirements and basic electrical engineering calculations; Voltage-drop, Ohm's law, conduit-fill, wire ampacity, de-rating, etc., • Proven experience in driving the successful execution of the bid process for $10 million to $100 million bids, • Electrical Contracting experience a must!, • Will consider union or non-union candidates, • Have and/or build the industry contacts that will contribute to bid success, • Experience interacting with State and local Municipalities a plus, • Solid knowledge of Estimating software - Accubid Anywhere with LiveCount, McCormick, Bluebeam, and a deep understanding of ConEst a plus, • Highly motivated, organized, and detail oriented, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus! (Navy Nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Relevant experience in Critical Facilities, • Client Facing /Client relationship / Client Management skills a plus, • Computer Savvy – Microsoft – Teams, Outlook, PP, Word, MS Project (scheduling with Activities and resources, etc.), MS Excel (pivot tables, v-lookup, graphing), Adobe, Primavera P6, Bluebeam, Procure, • Solid Communicator – (written and verbal), • Possess highly refined analytical / problem solving abilities After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description At Optima Engineering, we focus on delivering high-quality engineering solutions. We are looking for a skilled and dedicated professional to join our team and help us achieve our goals. Experience, Skills and Knowledge • Very familiar with SKM, Short circuit and Arc Flash Studies SKM or Easy Power., • Commissioning experience in Data Centers, • UPS and back-up generators, • Ability to write Test Scripts and Direct Efforts, • Provide input on project viability, assist with proposal preparation, and help select the design team., • Produce project schedules, lighting, power, and fire alarm designs, compliance checks and specifications, and conduct reviews., • Conduct interdisciplinary coordination and manage final reviews/approvals between disciplines and agencies., • Assist designers with maintaining conformed drawings, preparing submittals, and issuing revisions., • Bachelor’s Degree in Electrical Engineering., • Minimum 5-10 years of relevant experience on Mission Critical and Data Centers projects. Founded in 1992, Optima is a well-established, multi-disciplined engineering firm offering mechanical, electrical, plumbing, fire protection & technology design services to diverse market sectors including mission critical, educational, healthcare, commercial, government and other clients. Founded and based in Charlotte with branch offices in Raleigh, NC, Asheville, NC and Greenville, SC, our goal is to deliver reliable, high-quality, innovative engineering solutions to our clients and provide a top-notch work environment to our team. Benefit Highlights: • 100% Employee-Owned Company, • Our focus on Work-Life Balance means you will enjoy Paid Time Off and Holidays, Flexible/Hybrid work schedules, and Half-Day Fridays year-round!, • Health, Vision, Dental, Life, Disability and Personal Accident insurance options, Health Savings and Flexible Spending accounts, • Tuition reimbursement, Adoption assistance, Employee wellbeing & assistance programs, financial & estate planning assistance, and more!, • Multi-tiered Retirement Plan includes Employer 401k contributions, Profit-sharing, and Employee Stock Ownership Program (an additional retirement benefit funded entirely by the company)., • Discretionary bonuses throughout the year., • Ongoing education and professional development opportunities. To learn more about Optima Engineering, please visit our website at: Optima Engineering is committed to providing an equitable, diverse, and inclusive workplace and is an Equal Opportunity Employer. All qualified applicants, including individuals with disabilities and veterans, are encouraged to apply. Optima Engineering participates in the E-Verify employment authorization program. Please read more information here . Powered by JazzHR j8n1G79LbK

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Position Title: Automation Manager We are seeking an Automation Manager to take our existing facility to the next level of automation and robotics excellence. Working in collaboration with our principal customer, we will be converting manual lines to fully automate-robotics lines for pick-and-place food product packaging applications. Pay: $120,000-$140,000 Responsibilities: This role reports to the Facility-Site Director. It will initially be partnering with our primary customer’s design and engineering team to build out-convert existing semi-automated lines to fully automated robotic capabilities for food-product bulk repackaging. It is truly a plank-owner opportunity. The Automation Manager will be responsible for automation and maintenance techs for technical capabilities, on-site process support, department people and food safety, team engagement, and enhancing cost-reliability and continuous improvement opportunities. The ideal candidate has a strong technical, mechanical, and maintenance background, preferably with strong automation skills. They should be team-focused, and demonstrate exceptional analytical, collaboration, and team management skills. • Development & Training of standard operating procedures, • Overseeing all aspects of facility maintenance and automation management., • Overseeing continuous improvement on developed processes, • Managing multiple complex projects with competing demands while utilizing problem solving skills to ensure the successful implementation and roll out of automation project updates, • Leading all automation related projects for the site, • Deploying strategies/processes/procedures to meet the potential of automation equipment., • Implementing process improvements of automation technology., • Demonstrating coaching and team member development skills for multiple positions including automation and maintenance technicians, operators, and associated team members., • Tracking performance and improvement KPIs., • Working cross functionally daily with multiple teams including site ops, IT, OT, external vendors, engineering, inventory, and maintenance., • Utilizing E80 UI, WMS, PGT/SAP and CMMS for visibility and maintenance of automation equipment and operations., • Supporting site operations from a systems perspective to include PGT integration and sustainability., • Supporting commissioning, IFT, FAT, qualification and verification of any new Automation equipment/systems., • Delivering effective change management processes, oversight, and execution., • Working with peer group across the Network to learn/share best practices, • Maintaining effective communication with external project teams and internal operations teams to minimize impact on operations, • Resolving high urgency critical opportunities by diligent and effective problem-solving activities with the total site team., • Creating and updating the playbook for automation on site through developing SOPs and training the site team., • Demonstrating an independent manager mentality as the facility SME through effective time and project management skills., • Ensuring spare parts, components, and tools needed for maintenance are on-hand for technicians, managing all facets of maintenance and automation teams supplies., • Bachelor’s degree in engineering, IT, or data science preferred: Equivalent experience will be considered., • Experience with automation-automation systems: WMS, SAP, CMMS, OEM UI/HMI, Power Apps, • Analytical, data-driven assessment skills, • Strong written and verbal skills (English required, Spanish a plus.), • Proven results-achieving work background About Pro Pac and Qual Pac Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Job Description Manages Life Safety Compliance document submissions associated with State and Federal regulatory obligations DUTIES AND RESPONSIBILITIES: The Life Safety Compliance Technician provides accurate and timely submission of reports in accordance with State and Federal requirements; ensures high level of client satisfaction and standards of service excellence are maintained. • Ensures accurate reporting of information, • Tracks and maintains compliance documentation received from multiple sources; Engineering, Property Managers, Landlords and Vendors, • Pulls reports from Asset Management software program, • Manages the Elements of Performance reporting cycle; daily, monthly, quarterly, annually, • Reviews all reports and documentation for compliance and accuracy, • Uploads and manages document submission to SharePoint, • Maintains Excel spreadsheets to track status of document submissions, • Understands and interprets Life Safety and Building Codes, • Handles other duties as assigned MINIMUM REQUIREMENTS: • Four year degree and 3+ years of related experience; or the equivalent combination of education and related experience, • Intermediate proficiency in Word, Excel, Adobe Acrobat Pro, and SharePoint, • Experience with building maintenance software CMS (Custom Maintenance Software) a plus, • Common maintenance knowledge of core building equipment; Mechanical, Electrical, Plumbing, and Life Safety systems a plus, • Ability to understand and interpret Building Maintenance reports, • Ability to proofread documents, as well as spreadsheets, for completion and accuracy, • Excellent verbal/written communications skills, • Strong organizational skills; detail oriented, • Self-starter with the ability to work independently as well as collaboratively and produce results with minimum supervision, • Proven record of providing excellent internal and external customer service About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

Job Description Title - Production Manager (Mechanical) Tenure – Full Time, Permanent Location – Charlotte, NC Position Overview The Production Manager is responsible for overseeing day-to-day manufacturing operations, ensuring production targets are met safely, efficiently, and in alignment with quality standards. This role requires strong hands-on knowledge of mechanical processes, equipment, and manufacturing workflows, along with proven leadership experience in a plant environment. The ideal candidate will drive operational excellence, support continuous improvement initiatives, and work closely with maintenance, engineering, and quality teams to optimize production performance. Key Responsibilities Production & Operations Management • Manage daily production operations to meet output, quality, safety, and cost targets., • Develop and execute production schedules aligned with demand, labor, and equipment capacity., • Monitor KPIs including throughput, downtime, scrap, and OEE; take corrective action as needed., • Provide hands-on leadership and technical guidance on mechanical manufacturing processes, including machining, assembly, fabrication, and equipment operation., • Partner with maintenance and engineering teams to troubleshoot mechanical issues, reduce downtime, and improve equipment reliability., • Support equipment installation, commissioning, upgrades, and preventive maintenance programs., • Lead, coach, and develop production supervisors, leads, and operators., • Ensure teams are properly trained on mechanical processes, equipment use, and safety procedures., • Drive accountability for attendance, performance, and adherence to standards., • Ensure all manufacturing activities meet quality, safety, and regulatory requirements., • Promote and enforce lockout/tagout, machine guarding, and safe work practices., • Lead and support Lean, Six Sigma, and continuous improvement initiatives., • Identify process bottlenecks and implement solutions to improve efficiency and reduce waste., • Work closely with Engineering, Maintenance, Supply Chain, and Quality teams to align production goals. Qualifications Required • Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or a related field (or equivalent hands-on manufacturing experience)., • 5+ years of experience in manufacturing operations, with at least 3 – 5 years in a supervisory or management role., • Strong working knowledge of mechanical manufacturing processes and equipment., • Proven experience managing teams in a fast-paced plant environment., • Experience in machining, metal fabrication, assembly, or automated manufacturing environments., • Lean Manufacturing / Six Sigma certification., • Experience with ERP/MRP systems and production reporting tools. Key Competencies • Hands-on mechanical aptitude, • Strong leadership and decision-making skills, • Data-driven problem-solving, • Ability to work cross-functionally, • High accountability and ownership mindset

Job Description About Ruggable: Ruggable is a leading direct-to-consumer e-commerce brand based in Los Angeles, California with an extraordinary track record of high, profitable growth. We pride ourselves on having an extremely loyal customer base and a talented team made up of genuinely caring people who take action and deliver results. We are venture-backed and own a patented washable rug design that's disrupting the home décor industry. Our mission is to empower our customers to live vibrantly with beautiful products that don't compromise on function. If you're passionate about consumer products, e-commerce, and high-growth start-ups, keep reading! Job Summary: As Ruggable's Sr. Manufacturing Engineer, you will play a pivotal role in the growth and success of Ruggable. You will be a data-driven, strategic problem solver and innovative thinker across the Operations organization. More specifically, you will lead projects that support Ruggable's journey into a data-centric, innovative company on the forefront of the home goods market.. Your day-to-day will include identifying and scoping automation opportunities, vetting strategic equipment manufacturers, identifying key process optimization opportunities, and implementing engineering projects., You will be working closely with Operations stakeholders to understand existing processes, solicit user requirements and lead implementation of operational improvements. What You'll Do: • Scope, Project Manage, and Commission automation projects for direct-to-consumer and omnichannel business units, • Identify and prioritize cost, quality, and safety automation opportunities, • Vet strategic equipment manufacturers and manage ongoing external relationships, • Select and manage contractors for project installation and hold them accountable to Ruggable's engineering and safety standards, • Assist Director of Operations Engineering with vetting and identifying strategic asset counter sourcing opportunities, • Assist Director of Operations Engineering with Digital Factory opportunity scoping and project implementation, • Assist cross-functional partners (e.g. Product Development, Sourcing) in vetting third-party production capabilities, • Collaborate with Operations stakeholders to understand existing processes, solicit user requirements and request feedback to drive continuous improvement Required: • 3-5+ years of professional experience working in continuous improvement or manufacturing project engineering, • Excellent proficiency with Google Sheets / Excel, including advanced formulas and model construction, • Experience in working with global equipment manufacturers (OEMs) to scope and vet investment opportunities, • Ability to manage and hold contractors accountable to Ruggable standards, • Ability to build and effectively manage capital project budgets, • Ability to project manage complex engineering projects and communicate effectively with cross-functional stakeholders, • Ability to solicit user requirements from multiple stakeholder groups and translate those requirements into metrics, reports, tool features, etc., • Strong troubleshooting skills across mechanical and electrical systems, including identifying root causes and implementing corrective actions., • Strong relationship development skills with ability to quickly become a trusted thought partner across Operations teams, • High attention to detail and ability to manage competing priorities simultaneously, • Exceptional verbal and written communication skills, • Must be willing to travel both domestically and internationally for project implementations across multiple manufacturing sites, • Experience utilizing and/or building dashboards (i.e., Tableau, Looker, Google Sheets), • Previous experience working in consumer packaged goods or textiles, • $100,000 - $120,000 per year base salary, • An annual bonus percentage that varies based on level of role If you are based in California, we encourage you to read this important information for California residents linked here. To all recruitment agencies: Ruggable does not accept unsolicited agency resumes. Please do not forward resumes to our jobs alias, Ruggable employees or any other company destination. Ruggable is not responsible for any fees related to unsolicited resumes.

Job Description Position Title: Direct Sales Representative Department: Sales FLSA Status: Exempt— Sales Reports To: Area Sales Manager Have you been out of the workforce because you raised a family or wanted to enjoy the birth of your children and time with them during those sweet years or take some time to figure things out or what to do after high school or college or just looking to plot a new course? Do you feel like you have that drive to push your mind and a desire to see new and incredible things in your community and surrounding area? We’re not looking for ordinary professionals. We want sharp thinkers who have personality. Why? This career will have you working alongside technical experts in the commercial and industrial hvac market. You will be the first line to introduce yourself and our innovative brand to new clients in facilities in your local area. You will get the opportunity to see client facilities in the industrial and commercial markets on the cutting edge of technology, from high end clothing designers’ facilities, to testing labs for skin care before they go to market, to whole food solution packaging that are destined to central America to help feed impoverished nations. You may see twenty-foot diameter toilet paper or even server rooms inside of mountains. Our footprint covers it all. If you are tired of a desk job, want to be in all the latest industrial and commercial sites, enjoy working with all sorts of people, please send us your resume. We might be looking for you. Hoffman Mechanical Solutions, Inc. is actively seeking qualified professionals who: • Mine information to help sales staff be successful, • Create estimates and quote letters for sales staff as needed, • Drive new sales for the company in a professional manner consistent with the company’s integrity and customer-care standards, • Determine needs and provide solutions that solve the customer’s issues and generate a high rate of referral-based sales, • Perform sales presentations, as outlined in company selling process, using approved company presentation materials and methods, • Educate potential customers on value, • Refine communication skills and improve customer satisfaction processes., • Keep appointments with customers as scheduled, • Participate in training as requested, • Demonstrate learning-retention and field-level application of knowledge and skills attained from all trainings provided, • Stay in contact with the office while in the field and work from the office when not in the field, • Follow company procedures for generating referrals, • Participate in bi-weekly sales meetings, • Perform other duties as assigned Qualifications: • Bachelor’s Degree in Engineering, Math, Sciences or related field required, • Goal oriented with a strong desire to succeed, • 2 or more years’ experience in the HVAC industry preferred but not required, • Minimum 2 years’ experience in similar role preferred (Inside Sales/Account Executive/Product Management), • Experience with Marketing / Project Management / Sales / Customer Service, • Excellent customer service skills, • Strong analytical, interpersonal & communication skills, • Mechanically inclined, • Solid organizational and sales pipeline management skills, • Strong understanding of the psychology of sales, • Highly developed interpersonal and analytical skills Physical Demands and Work Conditions: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may enable individuals with disabilities to perform the essential functions. Physical Demands: • Normal office environment, • Able to visually inspect all areas of customer sites, • Use of step ladders, • Occasionally lifts to 30lbs., • Proper PPE may be required in commercial environments (hard hat, safety glasses, ear plugs, safety vest, gloves and occasionally respirators) Work Conditions: • Normal office conditions, • Exposed to weather condition, • Exposure to dusty and confining areas of a commercial space for short periods of time This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be constructed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. No phone calls or drop-ins, please. EEO Employer/Vets/Disabled

Job DescriptionSalary: $85-95K base, plus commission Electrical Sales Engineer Reports To: CEO Position Type: Full-Time Date Posted: 12/8/2025 FLSA: Exempt Company Background: For over 50 years, JG Blackmon & Associates has been a trusted provider of mission-critical infrastructure solutions throughout the Carolinas. We support our clients through the entire data center lifecyclefrom design and procurement to commissioning and beyond. Our portfolio includes power protection and distribution, precision cooling, and monitoring solutionsbacked by the technical expertise and responsive support our clients have come to rely on. Job Description: We are seeking a motivated and technically skilled Electrical Sales Engineer to join our team. This individual will be responsible for driving sales of our data center power infrastructure productsincluding those manufactured by Vertiv/Liebertto both new and existing clients. The Sales Engineer will cover Charlotte, NC and the surrounding counties, building relationships with contractors, consulting engineers, and end users. This is a consultative sales role focused on solution development, system design support, proposal generation, and lifecycle project engagement. Success will be measured by new customer acquisition, portfolio growth, and overall sales volume. Essential Responsibilities: • Serve and grow an assigned territory consisting of Charlotte, NC and surrounding counties., • Develop and maintain a strong network of client and industry contacts to identify new sales opportunities., • Support an assigned list of customers with a strong focus on technically demanding clients such as consulting engineers and end users., • Identify and engage new customers that enter your assigned territory., • Communicate with customers to identify and understand their needs and develop custom tailored solutions to fit those needs., • Maintain communication with established customers, alerting them to new technologies and industry trends that may be of interest., • Provide post-sale support and resolve customer issues as they arise., • Generate proposals and technical documentation to support sales efforts., • Collaborate with internal sales colleagues on strategic account opportunities and cross-selling efforts., • Participate in training and maintain current knowledge of product offerings and industry trends., • Maintain CRM data, prepare sales forecasts, and provide regular reporting., • Help develop and support customer marketing events., • Miscellaneous duties as assigned. Required Skills/Abilities: • Strong knowledge of commercial electrical systems., • Excellent communication and customer relationship skills., • Detail oriented with strong organization and time-management skills., • Analytical mindset and critical thinking/problem solving skills., • Self-motivated, independent and goal oriented., • Proficient with Microsoft Office Suite and general business software. Education and Experience: • Bachelors degree in electrical or mechanical engineering or related degree preferred., • 3-5 years experience working in the construction industry as a consulting engineer, contractor, or facility manager preferred., • Some background in sales preferred. Requirements: • Must be authorized to work in U.S., • Some travel will be required. The territory is generally a day trip, with visits to the vendors several times a year., • Must have a valid driver's license and be able to pass employment screenings. Compensation: • Position starts out on base salary plus bonus with eventual transfer to 100% commission compensation., • Excellent benefit package provided, including employer-paid health, dental, and vision., • Employer-paid life insurance and long-term disability insurance., • Standard PTO and holidays., • Opportunities for additional training and professional development. We value diversity at JG Blackmon & Associates. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description Electrical Project Manager - Data Center - Charlotte, NC Our client is an established Electrical Contracting Firm that is a leader in the Data Center / Mission Critical Facilities Market. They build mission-critical facilities for data center facilities nationwide for Enterprise, Colocation and Hyperscale Companies. They provide electrical contractors, designers, electrical commissioning, operations / maintenance, and management expertise for their clients' critical power needs. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for Electrical Construction Project Manager to support critical facility construction projects. This PM will run this office, manage projects from cradle to grave: estimates, run project to completion, handle procurement, and provide support post implementation. They will handle all aspects of managing a data center construction project and this will include providing leadership to contractors and vendors associated with the delivery of company's electrical projects. The candidate will have overall responsibility for the delivery of assigned projects on budget on time and assurance that the project scope and quality meet Company Design Standards and the objectives set for the project. The successful candidate will have to be exceptionally organized and be great with back-office work (change orders, budgets, process driven, etc.). Ideal candidate has come up the ranks in Electrical trades on the commercial side of business. Responsibilities: • Project focus will be over 100mm range, • Focus will either be on ground up data center projects (Greenfields), re-purposing a building (brownfields), or retrofits of existing data centers, • Respond to RFPs, RFIs to generate regional work in the area, • Generate estimates, prepare and review project proposals or plan to determine and establish a time frame, work plan, funding limitations, • Procedures for accomplishing the project, staffing requirements, and allotment of available resources to various project phases, • Maintain all logs required to track the progress of the project, • Oversee the project through administrative direction of on-site supervision to ensure the project is built following design, budget, and schedule, • Put together Project plans – size up, costs, budget and p/l, scheduling, timeline, forecasting, track expenses, manage change orders, etc., • Manage multiple projects simultaneously. Assist the Senior Project Manager in negotiating contracts with vendors as necessary. Responsible for creating and managing project schedules, • Maintain liaison with various contractors and vendors in order to manage the day-to-day activities that impact the delivery of company's critical facilities construction projects, • Be the point of contact with the clients onsite at the project location, represent the company in project meetings and any other contractors, GCs involved with the project, act as key Liaison with managers of all company departments, • Change Management Forms and Create Methods of Procedure (MOPs), • Ensure that all day-to-day project responsibilities are met by the contractors and vendors on the project, • Manage a regional team of suppliers and coordinate all deliveries of equipment with the Customer's Construction Contractor., • Lead the planning efforts in implementing manpower and managing the Integration of projects and timeline for Internal projects on Customer Site, • Drive Company Standards uniformly as it regards to Project Delivery by all project participants on all projects, • Deliver Built to Suit projects with a heavy emphasis on value-engineering, • Manage financial aspects of contracts (progress billing, rental equipment, income / expenses) to protect the company's interest and simultaneously maintain good relationship with the client, • Ensure planning, laying out installing and wiring electrical components are completed per drawings, specs and in accordance with electrical code, • Oversee electrical installation of equipment and job performance on sites and ensure ongoing attention to work-site safety and standards, • Experience managing Data Center Construction Projects as a General Contractor, • Experience managing a budget 100mm or more, • 5+ years' experience as a licensed journeyman electrician a plus, • 5+ years of supervisory experience / People and Resource Management, • Thorough knowledge of the practices, methods, equipment, materials, and tools of the electrical trade, • Knowledge of the occupational hazards and safety precautions of the work, • Ability to supervise the work of skilled workers and provide guidance and leadership, • Experience interpreting blueprints and specifications - both electrical and mechanical drawings, • Experience with Electrical Conduits / Power Systems such as UPS, Switchgear, Generators, PDU's, • Should have a background or know what this means when conducting electrical installations to include things like: crown box, offset and slice junction, • Minimum of 5-10 years relevant experience in the Data Center Construction Industry, • BA / BS / Associates Degree a plus but not required, • Client Facing / Client relationship / Client Management skills, • Solid Construction Project Management experience, • Effective Communicator – emails, phone and face to face, • Ability to successfully work independently; Self Starter, self motivated, and attention to detail, • Travel as needed to project sites, • Solid Admin skills, • OSHA Certification (or ability to get one within first 12 months of employment), • Finance Experience - forecasting, budgets, etc., • Computer savvy: MS Project, Excel, Teams, MS Project, Oracle Primavera P6, Bluebeam, Procore, AutoCAD a plus After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate