Engineering jobs in Texas - Page 4

Job DescriptionDescription: Position Summary: The Mechanic, under direction of the Fleet Maintenance/Facilities Technician, runs inspections, diagnostic tests, repairs a variety of vehicles and equipment. This position is for the night shift Education and Experience: · Class A or B certification, strongly preferred · Required High School diploma or equivalent of education and experience, preferred · 1+ years of preventative maintenance experience · Must possess tools required for vehicle maintenance · Must obtain a valid driver’s license, class C license at minimum Requirements: Essential Functions: · Uses knowledge of mechanical and electrical systems to perform basic preventative maintenance and repairs to Tiger’s Vehicle Fleet · Conduct nightly inspections and adjustments; including oil changes and fluid replenishment, visual inspections to identify potential issues and other duties as indicated by DOT and other regulations · Ability to repair and inspect vehicles in accordance with OSHA (Occupational and Safety Health Act), DOT (Department of Transportation), and company requirements as well as all local, state and federal laws. Knowledge/Skills/Abilities: · Ability to convey Tiger Sanitation as the obvious choice for our customers, employees and community · Actively demonstrates Tiger Sanitation’s core values in daily tasks and communications: Professionalism, Respect, Accountability and Communication · Ability to demonstrate decision making skills that align with Tiger Sanitation’s 4 Step Decision Making Process · Ability to act independently · Ability to collaborate with coworkers · Knowledge of vehicle systems · Must possess tools required for vehicle maintenance An Equal Opportunity Employer disability/veteran

Job DescriptionAre we the road to your future? We are currently searching for an experienced Transportation Project Manager with 10+ years of relevant experience to support our Southwest Region located in San Antonio, TX. To be considered for this position, applicants must have, at minimum, 10 years of progressive transportation/roadway experience and 3 years' experience in management of engineering and support staff. What you’ll be doing: • Provide daily technical support to engineering staff, • Oversee engineering design teams, • Develop engineering schematic, plans, estimates, and details for various transportation projects, • Provide project management and engineering support project delivery, • B.S. or M.S. in Civil engineering, • Licensed Texas P.E., • 10+ years of progressive transportation/roadway experience, • 3+ years of experience in management of engineering and support staff, • Relevant experience in OpenRoads Designer (ORD), • Experience in ProjectWise file management environment, • Ability to develop and implement detailed Quality Assurance/Quality Control Plans, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license, • Strong history and experience with TxDOT projects and programs, • Assist office leader with business development and marketing responsibilities, • Engage and participate in local and regional organizations that support the engineering and transportation industry Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 Texas

Job Description Job Overview: We are seeking an experienced IT Infrastructure Architect to join a leading Oil Gas refinery organization. This role is critical in designing, implementing, and optimizing infrastructure solutions that support both traditional IT and Operational Technology (OT) environments. The ideal candidate will bring deep expertise in observability, reliability engineering, and application integration, with a strong understanding of complex, high-availability industrial systems. & Key Responsibilities: • Architect and implement scalable, secure, and resilient IT infrastructure solutions across refinery operations., • Lead observability initiatives using tools such as Dynatrace, Elastic Stack, and Splunk to ensure system performance, availability, and proactive issue resolution, • Drive reliability engineering practices, leveraging data-driven automation to improve system uptime and operational efficiency., • Design and support application integration strategies, including stream processing and API engineering, to enable seamless data flow across IT and OT systems., • Collaborate with cross-functional teams including cybersecurity, operations, and application development to align infrastructure with business goals., • Provide technical leadership and mentorship to engineers and project teams. Required Skills Experience: • Proven experience as an IT Infrastructure Architect in large-scale enterprise or industrial environments., • Deep knowledge of observability platforms (Dynatrace, Elastic Stack, Splunk)., • Strong background in reliability engineering, including automation, monitoring, and incident response., • Expertise in application integration, particularly with streaming data platforms and API development., • Familiarity with Operational Technology (OT) systems and environments is highly desirable., • Excellent communication and stakeholder management skills. Preferred Qualifications: • Industrial sectors., • Certifications in relevant technologies (e.g., AWS/GCP/Azure Architect, Splunk Certified Architect, etc.)., • Understanding of cybersecurity principles in OT/ICS environments.&

Job Description Hazen and Sawyer is seeking a Water/Wastewater Project Engineer for our San Antonio, Texas office. As part of our design and process teams, you will work on water and wastewater projects, including drinking water/wastewater/reuse treatment facility upgrades, conveyance systems, wellfields, stormwater management, water resources, and asset management. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Participation in the evaluation, planning, and design of water, wastewater, reuse, and infrastructure projects, • Participation in a project team from the initial study and conceptual design stages through to the construction of major water related infrastructure projects, • Fieldwork and site visits from design through construction may be required, • Other responsibilities may include:, • Client development and management supported by our local offices, • B.S. in Environmental, Civil, Chemical, or Mechanical Engineering, • PE license (or obtain within 6 months of employment), • 5-12 years of experience in planning and design of water-related projects, • Strong interest in the water/wastewater industry, • Excellent communication skills, self-motivation, organization, and attention to detail, • Must be proficient in Microsoft Office Suite, • Experience related to preparing conceptual/feasibility studies, development of construction drawings and specifications, bidding assistance, and support of office and field-related construction services, • Familiarity with engineering and construction management software, • M.S. in Environmental, Civil, Chemical, or Mechanical Engineering, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Are we the road to your future? We are currently searching for an experienced Junior Structural CAD Technician to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, a degree in Computer Aided Drafting or similar field and 3 years of prior experience with structural drafting. What you’ll be doing: • Provide assistance to engineers using OpenBridge Designer to create bridge detail plans and perform minor design work on bridge projects, • Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans, • Prepare minor mathematical calculations and quantity calculations for roadway/bridge projects, • Work with engineers to develop 3D models using both Open Road Designer and Open Bridge Designer, • Research applicable design codes and guidelines to ensure design compliance, • Research design options and documents findings, • Coordinates assignments with project team and supervisor, • Perform quality control reviews of design plans and calculations, • Perform other duties as assigned by supervisor, • Be a team player and assist other groups as needed What you need to have: • Associate degree from a technical or four-year school, • 3-10 years of prior experience with structural and/or roadway drafting, • Degree in Computer Aided Drafting or similar field is preferred, • Familiar with TxDOT Bridge Detailing Manual and TxDOT Bridge Standards, • Experience in Open Road Designer is preferred, • Experience in Autodesk Civil 3D is a plus, • Excellent communication skills and ability to work within a team environment, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 TX

Job Description LEAD ENGINEERING TECHNOLOGIST - PRINCIPAL ENGR. TECHNOLOGIST - Lead Printed Wiring Board (PWB) Desi Who We Are: The Strategic Aerospace Department in the Defense & Intelligence Solutions Division provides the USAF with engineering services that increases the warfighters capabilities specifically for the bombers, tankers and heavies platforms. We provide world-class research, design, services, and support, offering both new products and solutions to legacy issues for the US Air Force Global Strike Command, DoD industry, Allies, and U.S. Government. This position has the ability to have an alternate work location in Austin, Tx. Objectives of this Role: • Lead other designers in the development of PWB designs for avionics systems. Participate in proposals and customer meetings., • Will work in a team environment as well as independently to complete assigned tasks with minimum supervision., • Development of Printed Circuit Boards (PCBs) and Library component generation., • Requires PWB design experience to support integrated product team design reviews of drawings and other relevant technical data in support of avionic designs., • Position may require additional hours to meet project schedules., • Requires a Bachelors degree Electrical/Electronics Engineering Technology, Aeronautics Technology or a High School diploma/equivalent or an Associates degree with continued education, certifications, and 25 years related experience., • 10+ years: Those with a Bachelors degree require 10-15 years of experience in printed wiring board design., • 25 years: Those without a Bachelors degree will require 25 years of advanced working knowledge of Mentor Graphics PADS Professional, and/or Xpedition with printed wiring board design., • Interconnect principles and practices designing low level and complex PWB designs is desired., • Basic understanding of configuration management and electronic development methods are required. A good understanding of Signal Integrity as well as a good mechanical aptitude is desired. Prior knowledge of IPC standards, Digital, Mixed Signal, and RF electronics PWB designs. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas Or Austin, Texas

Job Description The Application Engineer acts as a key technical liaison between customers, the sales team, and engineering, ensuring generator systems are properly specified and integrated to meet project requirements. This role is instrumental in influencing project specifications by providing accurate technical information and serving as a trusted resource for the consulting engineering community throughout the territory to promote Caterpillar equipment standards. Essential Responsibilities: • Collaborate with sales teams and customers to define technical requirements and recommend customized generator solutions, • Interpret specifications, load requirements, and site conditions to select and size generator systems, including auxiliary components, • Develop technical documentation, including drawings and submittals, to support proposals and project execution, • Coordinate with internal teams (engineering, production, and service) to ensure correct configuration and successful project delivery, • Provide technical expertise and application support to the sales team and customers, including onsite presentations and consultations, • Assist with troubleshooting and resolving complex integration and application issues, • Stay informed on relevant codes and standards (e.g., NFPA, NEC), as well as emerging technologies in power generation, • Support special projects as assigned by the EP Sales Manager, • Adhere to all safety policies and procedures; maintain compliance with company standards, • Perform other duties as assigned Qualifications & Skills: • Deep understanding of power generation principles and application engineering best practices, • Proficiency in sizing and specifying generator systems, including ATS, switchgear, and control systems, • Strong working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Access), • Familiarity with federal, state, and local regulations, including emissions and fire protection standards, • Excellent business acumen, with a high level of accuracy and attention to detail, • Knowledge of HOLT CAT Commercial Engine Sales operations and Dealer Business System (DBS) is a plus, • Strong communication and interpersonal skills, including technical writing and presentations, • Proven critical thinking and problem-solving abilities, • Strong organizational skills and the ability to manage multiple projects simultaneously under tight deadlines, • Ability to provide value-driven consultation and influence technical project specifications, • Resilient under pressure, with a professional and collaborative demeanor, • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field, • 2+ years of experience in an application, systems, or sales engineering role—preferably within power generation or related industries None Travel: • Travel up to 45%, and some overnight travel may be required, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines Work Environment: • This job is generally performed in a professional office environment, • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job Description Apply Here: Description: KMEA is a project management, environmental, energy, engineering and sustainability consulting company providing professional engineering, scientific, and technical services to our clients throughout the United States and internationally. With technical centers throughout the country KMEA’s award-winning services include Major Program Management, Environmental Remediation, Environmental Engineering & Consulting Services, Energy, Engineering (A/E), Sustainability, Staff Augmentation and Third-party Inspection Services. Our firm is committed to delivering innovative and sustainable solutions in support of mission-critical programs for the Department of Defense (DoD) and other federal agencies. We are seeking a Senior Mechanical Engineer / Project Manager to join our San Antonio office. This senior-level position offers the opportunity to lead and manage multidisciplinary teams on a wide range of federal, Department of Defense (DoD), and civil infrastructure projects. The successful candidate will serve as both a technical authority and project manager, responsible for project delivery, staff supervision, and client engagement from concept through completion. This hybrid position is based in San Antonio, Texas, with an expectation of working in the office at least two days per week. Travel is anticipated approximately 20 percent of the time. Main Responsibilities: • Provide technical leadership, project management, and program oversight for multiple concurrent mechanical and civil engineering projects within the federal sector., • Supervise, mentor, and develop a team of engineers, designers, and technical staff, fostering professional growth and ensuring high-quality project outcomes., • Serve as the primary client point of contact, maintaining strong relationships with federal agencies, DoD stakeholders, and other project partners., • Oversee the planning, design, analysis, and implementation of complex mechanical systems, including HVAC, plumbing, and fire protection systems., • Ensure compliance with federal, DoD, and local codes, standards, and specifications, and provide quality assurance for technical deliverables., • Manage project budgets, schedules, scopes of work, and resource allocation, ensuring adherence to contractual and financial requirements., • Coordinate and review design documentation, submittals, cost estimates (RS Means preferred), and contractor proposals., • Conduct site assessments, field inspections, and construction support activities, identifying risks and recommending corrective actions., • Oversee and provide direction to subcontractors and consultants, as needed, to ensure alignment with project goals and performance standards., • Prepare and review technical reports, correspondence, and formal submittals for client and internal approval., • Promote and ensure adherence to company and site-specific safety standards across all project activities.

Job DescriptionProject Engineer San Antonio, TexasJob DescriptionOverview We are currently seeking a Project Engineer in San Antonio, TX at our VIA Project to join our team. Duties and Responsibilities:*This is a non-exhaustive overview of the job duties for this position.Assist Project Manager and Project Engineer and act as support for the field.Know the contractual obligations that HCC has with the client and vice versa.Review and log shop drawings; assist field engineers with processing of submittals and RFI’sCode materials, labor and equipment.Procurement and timely delivery of materials to the project.Process material submittals and requests for information.Assist with Subcontract administrationAcquire and assist with closing construction-related permitsRegular and consistent engagement, participation and promotion of company Culture and its essential behaviors are a requirement for this positionRegular and predictable attendance and punctuality are a requirement for this position.Other duties as assigned. Qualifications:Four-year engineering degree plus two or more years similar construction scheduling experience or equivalent combinations of training and related experience.Must have excellent verbal and written communication skillsAbility to work with a teamMust have strong organization skillsMust be highly motivatedAbility to read and interpret construction drawings, specifications, and technical documentsProficient in Microsoft Word and Excel; experience with Prolog or PM Web is a plus Pre-Employment Requirements:Subject to pre-employment background check and motor vehicle report review.Subject to pre-employment physical, medical evaluation, and drug screen.Successfully complete and maintain any required safety certification and testing on an annual basis. Physical Requirements:The physical demands described below must be met by an employee to successfully perform the essential job functions of this role. This is a non-exhaustive overview of the physical requirements of this job.Perform light work, occasionally exerting up to 20 pounds of force.Able to walk on uneven surfaces.Occasionally ascend/descend step ladders and/or stairs.Regularly sit and stand for an extended period of time.Regularly kneel, bend, and squat.Must successfully pass color/vision examinations as required by the position.Must be able to hear and distinguish auditory signals as required by the position.Able to work in conditions with loud noise; work on/around heavy/moving machinery.Able to work outdoors in all weather conditions (hot, cold, rain, snow, and sleet). Safety:We are nationally recognized for its excellent corporate safety record which results from all employees at all levels, in all positions adhering to established policies and procedures. Reporting any and all safety violations to your immediate supervisor is a prerequisite for continued employment. Safety diligence by all results in a safe work environment for all. Benefits:We offer a robust benefits package including medical and dental coverage. The plans are specific to projects and locations.We offer a robust benefits package including medical and dental coverage. The plans are specific to projects and locations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description SUMMARY We are seeking a Structural Engineer with expertise in steel structure design and analysis in San Antonio, TX. This person will design and build custom generator enclosures, fuel tanks, access platforms, and power system structures that keep critical infrastructure running. This role mirrors Mechanical Engineering and Design positions in scope and collaboration, but with a focus on structural integrity, load-bearing systems, and compliance. RESPONSIBILITIES • Design and engineer structural steel assemblies, skids, platforms, and support frames for custom generator and power system enclosures, • Apply structural calculations, load analysis, and code compliance (IBC, AISC, AWS, OSHA) to ensure safety, functionality, and manufacturability, • Work in SolidWorks to develop models, drawings, BOMs, weldments, and frame assemblies, • Collaborate with cross-functional teams (mechanical engineers, project managers, drafters, and shop leads) to ensure designs are practical, buildable, and aligned with customer needs, • Conduct engineering checks of designs, validate structural assumptions, and guide drafting teams on proper detailing, • Own structural deliverables on projects from kickoff through production, including submittals, reviews, and field issue support, • Participate in design reviews, continuous improvement efforts, and development of standard structural practices and libraries, • Bachelor's Degree in Structural, Civil, or Mechanical Engineering, • 3+ years of structural design experience in a fabrication or industrial environment, • Proficiency with structural analysis software (e.g., RISA, STAAD, or equivalent), • Solid experience in 3D CAD modeling and drafting SolidWorks preferred, • Working knowledge of structural and welding codes: AISC, AWS D1.1, IBC, OSHA, • Excellent attention to detail, organization, and follow-through, • Experience designing access systems, walkways, stairs, and fall protection components, • Familiarity with generator packaging, mechanical integration, or fuel tank systems, • Experience building or fabricating what you design—we value engineers who understand the shop floor

Job DescriptionAbout VivSoft: VivSoft is a mission-driven technology company specializing in Cloud, DevSecOps, Artificial Intelligence, and Digital Experience. We are a diverse team of innovators focused on creating open, scalable, and automated solutions that drive digital transformation in the federal space. Our work culture fosters collaboration, creativity, and continuous learning. Job Summary: We are seeking a highly skilled DevSecOps Engineer to join our team and support the design, deployment, and optimization of cloud-native environments. This role involves managing Kubernetes clusters, implementing Infrastructure as Code (IaC), building CI/CD pipelines, and automating cloud operations. The ideal candidate is a self-starter with strong scripting skills, cloud platform experience, and a collaborative mindset. Key Responsibilities: • Design, implement, and maintain Infrastructure as Code (IaC) using tools like Terraform, • Manage and administer Kubernetes clusters, including Helm chart deployments, • Develop and maintain automation scripts using Bash and Python, • Build and optimize CI/CD pipelines using GitLab or other Git-based platforms, • Support and troubleshoot workloads running on AWS (Azure experience is a plus), • Collaborate with cross-functional teams using Confluence for documentation and JIRA for task tracking, • Active TS Clearance (Top Secret), • Minimum 2-5 years of experience with DevSecOps tools /processes, integration of security controls in cloud-native and containerized environments., • Strong experience with Kubernetes management and administration, • Proficiency in Terraform or similar IaC tools, • Scripting skills in Bash and Python, • Hands-on experience in cloud-native environments, • Familiarity with CI/CD tools and pipeline optimization, • Ability to work collaboratively and communicate effectively with technical and non-technical stakeholders, • Self-motivated with a proactive learning attitude, • Experience with Golang, Kubernetes operators, and custom resource definitions (CRDs), • Knowledge of observability tools such as Prometheus, • Comprehensive Medical, Dental, and Visions Plans, • Life Insurance, • Paid Time Off (Flexible/Combined PTO, Bereavement Leave, 11 Company Paid Holidays), • 401K Retirement Plan with employer match, • Professional Development Training Reimbursement, • Flexible/remote work schedule.

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking OSP Design Engineers to assist with the design and production of engineering deliverables on complex overhead and underground utility distribution projects. This position may require interfacing with utility clients, customers, and the potential for collaboration with multiple offices. Responsibilities • Assist in the preparation and development of distribution voltage construction packages for both overhead and underground projects, including distribution equipment installation, feeder replacement, cable replacement, and new feeder design., • Design aerial path based on field data and engineering best practices., • Ensure that all designs and new attachments satisfy utility standards and relevant codes (E.G. NESC / GO95 standards)., • Review utility poles and field notes to determine most accurate make ready solution., • Research and document requirements on aerial construction by pole owner or customer for whom the work is being performed., • Act as a Subject Matter Expert for Pole Loading Design and Analysis, both internally and externally to CCI’s customers., • Determine Right of Way (ROW) locations., • Determine the correct customer template to be used in the creation of construction and permitting drawings., • Complete ROW permitting and submittal as needed on behalf of the facility owner., • Confirm all deliverable documents are complete at project handoff with minimal direction., • Meet with Project Designers to review project data and the ability to input that data into OCALC or similar software., • Perform other duties and responsibilities as assigned., • Ensure confidentiality of company and customer information., • Create and promote the company image through exercising sound and ethical business practices as related to employees, the public and customers. This includes ensuring that the service and quality provided to customers is satisfactory., • Other duties as assigned by management. Qualifications we are looking for • 3 years’ relevant electric utility distribution design experience required., • Proficient with pole loading analysis software (e.g., O-Calc Pro, Katapult, PoleForeman, Spidacalc, PLS-Pole) required., • Complete the design of OSP projects, aerial, buried, and underground using AutoCAD, Adobe, GIS, and Excel with minimal direction., • Experience with utility engineering, Communications, Power Distribution, and Gas., • Experience in the Utility industry, permit completion and coordination., • Basic understanding of utility design, engineering concepts, and design tools., • Demonstrated track record of process improvements using new techniques, technology, or concepts., • Strong interpersonal and communication skills, with a demonstrated ability to work well and efficiently with a wide variety of people., • Strong organizational skills that reflect ability to perform and prioritize multiple projects seamlessly with excellent attention to detail and ability to meet strict deadlines., • The ability to work independently with minimal supervision; highly responsible, resourceful, and self-motivated., • Strong analytical, critical thinking, and problem-solving skills., • Able to meet strict deadlines., • Ability to embrace corporate values, understand the company vision, and exemplify CCI leadership behaviors. Shift is full-time Monday – Friday between the hours of 8:00 am – 4:00 pm CST. Must be flexible, and willing to work outside normal business hours, as necessary. Additional Information • Occasional travel may be required., • Must have a valid driver’s license and good driving record. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.

Job Description ESSENTIAL JOB FUNCTIONS AND RESPONSIBILITIES: Spectrum is seeking a qualified Senior Engineering Support Specialist to join our team with the Air Force Life Cycle Management Center's Cryptological Cyber Support Division in San Antonio, Texas This candidate shall develop and design recommendations for suitable substitute parts, system upgrades, alternate suppliers, and configuration changes in response to sunset technologies, loss of suppliers, and technology changes affecting availability of items or commercial repair services. Perform system upgrades as required and create/update engineering drawings. Additionally, this candidate will provide technical advice and guidance on system diagnostics, repair and functional check out procedures to field units, program office personnel and other technicians. Other tasks include: • Troubleshoot/repair equipment to the component level, • Make condemnation decisions on unserviceable equipment as required, • Make bench test/perform operational assessments of equipment before returning to serviceable stock, • Provide input to configuration control documents as requested by engineers or program managers, • Provide suggested changes to engineering drawings, field/depot level technical orders, and recommendations for component form/fit/function changes to systems REQUIRED/DESIRED SKILLS AND EXPERIENCE: • TS/SCI REQUIRED, • Minimum 8 years' experience, • Understand DoD Technical Orders, Illustrated Parts Breakdowns, engineering drawings, • Possess a valid US Passport, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Training & Development, • Wellness Resources, • Stock Option Plan

Job DescriptionCompany Description The City of San Antonio's mission is to deliver quality City services and commit to achieve San Antonio's vision of prosperity for our diverse, vibrant, and historic community. Our approximately 12,000 employees are critical in the delivery of quality services to the residents of the City of San Antonio. The commitment our employees demonstrate to their jobs and to the advancement of the City's goals is the key to our success in mission accomplishment. The City of San Antonio has identified four core values - Teamwork, Professionalism, Integrity, and Innovation - to efficiently and effectively inspire, motivate, lead, develop and empower employees in order to serve the public economically, ethically, equitably, and continuously improve and promote the high performance of government. To ensure commitment to these values and to further integrate them with our organizational mission and vision, it is imperative that we seek these behaviors in the people we hire. Job Description Under administrative direction, is responsible for performing professional and supervisory work directing the activities of an Engineering section or division. Working conditions are primarily in an office environment. Exercises direct supervision over assigned staff.. Work Location 6939 W Loop 1604 N, Building 2 (Northwest Service Center), San Antonio, Texas 78254 Work Hours 7:45 a.m. - 4:30 p.m., Monday - Friday Apply online Essential Job Functions • As part of a team will collect and analyze data necessary to identify traffic issues, evaluate and develop solutions seek funding, implement solutions and ensure stakeholder involvement., • Supervises engineering staff in the development, design, construction, and maintenance of principal public works projects., • Provides information both verbally and in writing to the City Council or the general public regarding any concerns., • Advises other City departments on matters related to technical engineering issues., • Reviews design plans, project specifications, and cost estimates submitted by staff; attends review meetings; and identifies and solves design problems., • Develops policies for the section/division within the framework of any applicable regulations., • Develops programs to improve the efficiency of the division/section., • Approves plans and specifications for construction contracts; recommends the letting of contract; ensures that work is performed according to the provisions of the contract., • Requests and evaluates consultant fee proposals; monitors and approves compensation for professional engineering services., • Reviews all bid packages prepared by consultants; attends pre-bid conferences; analyzes bid results; makes recommendations on accepting/rejecting bids, • Develops and implements section/division budget., • Provides legal testimony., • Performs related duties and fulfills responsibilities as required.Qualifications, • Bachelor's Degree in Engineering from an accredited college, university or engineering school approved by a State Board of Registration for Professional Engineers., • Six (6) years' experience in engineering., • No substitution for education allowed., • Licensed to practice engineering in the State of Texas as a Professional Engineer., • OR, • Licensed Professional Engineer (P.E.) from another state with the ability to obtain a P.E. license in the State of Texas within 6 months of employment., • Direct traffic engineering experience, • Direct transportation project design, review and/or construction management experience., • Direct contract management experience. Additional Information For more information and to submit your application, visit the City of San Antonio's website at:

Job DescriptionSalary: The PKI Engineering Subject Matter Expert / Senior Engineer will play a critical role in supporting the Air Force Public Key Infrastructure (AF PKI) Program by integrating and implementing PKI capabilities into Department of the Air Force (DAF) and other Services systems, applications, and workflows. This position ensures secure authentication and encryption across DAF networks while maintaining interoperability with Department of Defense (DoD) components. The engineer will provide technical expertise to project teams supporting AF PKI products, assist customers, track support requests, and document solutions to enhance future support efforts. This role requires a proactive, detail-oriented individual with expertise in PKI systems and a commitment to maintaining a secure and efficient cybersecurity posture. Job Duties PKI Integration and Implementation: Integrate and implement PKI capabilities into DAF and other Services systems, applications, and workflows to enable secure authentication and encryption, as directed by program requirements. Technical Expertise: Serve as a subject matter expert on project teams for AF PKI products. Report progress through tasks assigned in a project management tool. Attend regular meetings to discuss requirements, technical solutions, risks and mitigations, and recommended actions. Interoperability Assurance: Ensure seamless interoperability between AF or other Services PKI infrastructure and other DoD components to support a unified and secure operational environment. Customer Support: Provide technical assistance to customers for PKI-related issues, questions, or implementation and integration of PKI into their systems or applications. Address user and site issues via telephone, email, or electronic means. Request Tracking and Documentation: Develop and maintain a solution for tracking customer support requests, documenting efforts, and capturing associated information to facilitate future support and improve service delivery. Technology Evaluation: Evaluate emerging commercial and government technologies (e.g., RSA-4096, SHA-384, non-person entity certificates, derived credentials, FIPS 201 compliance, PKI on SIPRNet/NIPRNet/JWICS, mobile devices, SSO, web servers, MDM) for interoperability and feasibility with DoD/AF PKI, as directed by the Government; re-evaluate existing COTS solutions for compatibility with new features. System Maintenance: Assist with performing required actions to sustain the Technology Integration Cell (TIC), including configuring and maintaining hardware and software, applying security controls, and conducting patching. Resource Identification: Identify and recommend to the Government any software or hardware purchases necessary to keep the TIC operational and supporting testing objectives. Required Qualifications Technical Expertise: Demonstrated experience in integrating PKI capabilities into complex systems, applications, and workflows, with a focus on secure authentication and encryption. Proficiency in testing, configuring, and deploying software and hardware updates for PKI systems. DoD Knowledge: Familiarity with DoD and DAF systems, policies, and infrastructure, including an understanding of interoperability requirements across DoD components. Problem-Solving Skills: Ability to troubleshoot and resolve technical issues related to PKI implementation and provide effective customer support. Documentation Skills: Proficiency in developing and maintaining tracking systems and documentation for technical support requests and solutions. Security Clearance: Must possess or be eligible to obtain and maintain a minimum Secret clearance, with all employees cleared to at least Secret by the contract start date of June 1, 2025. Location: Ability to work in San Antonio, TX, with potential for on-site support at the Government-leased facility as required. Education: Bachelors degree in related field. Preferred Qualifications Security Clearance: Active Top Secret (TS) or Top Secret/Secure Compartmented Information (TS/SCI) clearance. PKI Specialization: Advanced knowledge of PKI systems, certificate management, and cybersecurity best practices within a DoD context. Experience with DAF Systems: Prior experience integrating PKI into DAF-specific systems or applications. Specific experience with AF Less Than Medium Assurance or Only Locally Trusted PKI systems. Communication Skills: Strong verbal and written communication skills to effectively assist customers and collaborate with DoD stakeholders. Certifications: Relevant certifications such as CompTIA Security+, CISSP, or other DoD 8570/8140-approved Information Assurance certifications (e.g., IAT Level II or higher). Adaptability: Experience working in dynamic environments where requirements may evolve, such as supporting DoD or DAF initiatives that introduce new or updated technical needs. Expertise: Experience or education in any of the following: authentication (ex. Multi-Factor Authentication, Single Sign On), post-quantum cryptography, Linux, cloud-based systems, networking, or AI and machine learning.

Job DescriptionSalary: Civil Engineer / EIT Join a collaborative team driving innovative land development and infrastructure projects across the country and build your future with us! About Paradigm Design Paradigm Design is a nationally recognized civil engineering and architectural firm specializing in land development and infrastructure projects across diverse markets including education, entertainment, retail, industrial, warehousing, residential, and public infrastructure. At Paradigm, people are at the heart of everything we do. We foster a culture of collaboration, inclusivity, and professional growth, where all team members contributions are valued. With a commitment to mentorship, teamwork, and technical excellence, we equip our employees with the tools, resources, and support they need to succeed. The Opportunity We are seeking a Civil Engineer / Engineer-in-Training (EIT) to support the planning, design, entitlement, and construction of land development and infrastructure projects. This role involves collaborating with project managers, engineers, and other professionals to create detailed plans and designs using AutoCAD Civil 3D. This position requires candidates to be located in one of our active or expanding markets: What Youll Do • Prepare engineering drawings, plans, and specifications for civil engineering projects, including site development, roadways, drainage, and utilities., • Utilize AutoCAD Civil 3D to produce detailed drawings, models, and layouts that meet project requirements., • Collect and analyze survey data, zoning information, utility records, and jurisdictional codes to inform project planning and design., • Assist in technical reports, calculations, and design documentation for permitting and regulatory compliance., • Review and interpret engineering plans and specifications to ensure accuracy and compliance with standards., • Maintain organized project documentation, including drawings, correspondence, and revisions., • Collaborate with internal teams, consultants, and regulatory agencies to obtain project approvals and permits., • Communicate with clients, contractors, and stakeholders to clarify design requirements and address inquiries., • Participate in project meetings, design reviews, and occasional site visits to support project progress. What You Bring • Bachelors degree in Civil Engineering or a related field., • Engineer-in-Training (EIT) certification required; PE license a plus., • 3(+) years of civil engineering experience, ideally in land development or infrastructure., • Proficiency in AutoCAD Civil 3D., • Strong understanding of grading, drainage, and utility design fundamentals., • Detail-oriented with strong problem-solving and organizational skills., • Effective communication skills and ability to collaborate in a team-focused environment., • Self-motivated, with the ability to manage priorities in a fast-paced setting. Why Paradigm? We know you work hard, so we make sure youre supported and valued: • Competitive salary and growth opportunities, • Medical, dental, vision, life, short- and long-term disability coverage, • 401(k) plan with company match, • Parental leave and flexible work schedules, • Monthly team events from bowling and golf outings to happy hours and volunteer days, • A collaborative, team-focused culture that values your growth and contributions Ready to Build Your Career? If youre ready to grow as a Civil Engineer/EIT in a supportive, dynamic environment, wed love to hear from you! Apply now and lets build the future together. LinkedIn - Paradigm Design At Paradigm Design, we celebrate diversity and believe our work is better when many voices are at the table. We are proud to be an Equal Opportunity Employer and invite talented individuals of all backgrounds to join our team.

Job Description Are we the road to your future? We are currently searching for an experienced Senior Roadway Project Engineer to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, 10 years of relevant experience in roadway design. What you’ll be doing: • Familiarity with calculating plans quantities and engineering estimates, developing construction specifications, and coordinating with subconsultants, • Leading or assisting in the development of project designs and directing EIs and designers to successfully execute and deliver project work, while implementing client focused strategies, • Applying established and well-defined engineering techniques, procedures, policies or standards, • Prepares and modifies reports, specifications, plans, construction schedules, and designs for projects, • Aspires to work in a team environment and is willing to participate in business development efforts and meetings with clients. Work as part of a team to deliver a range of transportation and civil design projects, • Participates in ongoing development, communication and implementation of team concepts, programs and policies. Coordinates work to ensure best practices with all team members, • Attends appropriate team meetings, • Work on detailed engineering assignments including calculations and relatively standard work activities, • Adjusts and correlates data, recognizes discrepancies in results, • Identify and analyze problems using reasoning to arrive at conclusions, • Applies standard practices and techniques to accomplish work assignments, • Understands and adheres to assigned phase and task schedules and budgets to ensure timely and cost-effective completion of project, • BS degree in Civil Engineering from an accredited four-year college or university, • 10+ years relevant experience in roadway design, • Must have proven skills in meeting DOT expectations, schedules and budgets, • TxDOT experience is preferred but not required, • PE is required, • Experienced in DOT design methods, plan preparation, standards, and specifications, • Proficient with OpenRoads Designer, • Strong interpersonal and communication skills, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Houston McKinney Rockwall Round Rock San Antonio Tyler TX #LI-SD1

Job Description The Senior Geotechnical Engineer will take on a variety of responsibilities including proposal preparation, technical review of reports, field oversight, and client interaction. This is an ideal role for someone with a strong technical foundation who also enjoys mentoring, developing solutions to complex geotechnical challenges, and managing high-value projects from start to finish. Key Responsibilities Technical Work • Conduct and oversee geotechnical evaluations, field explorations, and sample collections, • Perform advanced engineering analyses and calculations, including PVR calculations, • Apply expertise in subsurface design, deep foundation systems, slope stability, and ground improvement methods, • Utilize engineering software tools such as Geostudio, SLIDE, and VOLFLOW for project analysis, • Supervise and mentor engineers, technicians, and support staff, • Promote a collaborative and safety-focused work environment, • Maintain strong client relationships through responsive communication and high-quality deliverables Requirements • Bachelor’s degree in Geotechnical Engineering, Civil Engineering, or related field, • Professional Engineer (PE) License in Texas (required), • Minimum 8 years of experience in geotechnical engineering, preferably with projects in Texas, • Strong background in deep foundation and ground improvement systems, • Excellent communication, technical writing, and organizational skills, • 401(k) (Matching Program), • Health insurance, • Dental insurance (Free to Employees), • Vision insurance (Free to Employees), • Disability insurance (Free to Employees), • Life insurance (Basic Term Life Free to Employees), • Paid Time Off (PTO), • Professional Development Assistance, • Employee Referral Bonus, • Tuition Reimbursement

Job Description Position Description: MXR Imaging, Inc, a nationwide provider of Medical Imaging solutions in x-ray, CT, MRI and Ultrasound, is seeking an experienced X-ray Field Service Engineer. This person will be responsible for Corrective Maintenance and troubleshooting of Medical Imaging equipment, scheduled Planned Maintenance (PM) events and installation of medical imaging equipment at customer's facilities. This position is home office based. Limited overnight travel for service and training is expected. Location: San Antonio, TX Roles & Responsibilities: • Provide a high level of customer satisfaction by providing ongoing maintenance, technical Support, troubleshooting and repairs for medical imaging equipment, to include basic x-ray, both stationary and portable, digital imaging, PACS and networking environments, C-Arms, Ultrasound and Flouro systems., • Installation of imaging equipment to include some project management, site inspections, assist with site planning and interaction with customers and contractors as needed to insure preparation of the site to OEM specifications., • Completion of all necessary state and FDA required paperwork associated with the installation of radiation generating equipment., • Ordering of parts and supplies required to maintain equipment and tickets assigned., • Maintains a working knowledge and complies with all applicable federal, state, and local laws, regulations and industry standards., • Provides "On-Call" service coverage after normal business hours on a rotation basis with fellow team members in the area. Education & Certifications Required • AA in Electronics Experience • 5 Plus years' experience in the Medical Imaging Field Service industry with proven knowledge and skill in diagnosing and repair Medical Imaging equipment. Training and experience on the following OEM's and equipment lines is a plus..., • Carestream Medical Imaging Systems, • Quantum Medical Imaging, • Canon RadPRO Portables and In-room, • Del Medical, • Konica Minolta Digital Imaging Systems, • Fuji DR Imaging Products, • GE AMX Portables & OEC C-Arms, • Summit / Amrad Medical Imaging, • Valid driver's license and good driving record are required. Competencies • Detail oriented and self-motivated individual., • Proficient in MS Office applications including Word, Excel, Outlook., • Proficient in basic computer skills, windows and networking applications., • Strong verbal and written communication skills required to interact positively with all levels of customer personnel, co-workers and OEM support personnel to achieve positive results for our customers. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand, walk, sit, reach with hands and arms, and talk or hear. The employee is occasionally required to climb or balance, stoop, kneel, and crouch. The employee must occasionally lift and/or move up to 25 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Job DescriptionDescription: Your mission: Should you choose to accept it… Hillside Boutique Hotel is seeking a dependable Engineer/ Landscaping Assistant to support the maintenance team with repairs, inspections, and upkeep of the hotel's facilities and grounds. This entry-level role offers an excellent opportunity to learn from experienced engineers while contributing to the smooth operation of the property. If you are eager to grow in the hospitality industry, this is the role for you. Where you can make an impact: • Assist engineers with routine maintenance tasks, including HVAC, plumbing, and electrical repairs., • Perform inspections to identify maintenance needs and report issues promptly., • Support the implementation of preventative maintenance programs., • Help maintain equipment, tools, and inventory supplies., • Respond to guest and staff maintenance requests with urgency and professionalism., • Assist with emergency repairs and troubleshooting during critical situations., • Keep maintenance areas clean and organized., • Follow safety protocols to ensure a secure working environment., • Document maintenance activities and provide updates to supervisors., • Learn and develop skills under the guidance of experienced engineers. Requirements: Education/Formal Training: • Basic understanding of mechanical and electrical systems., • Strong willingness to learn and take direction., • Ability to work independently and as part of a team., • Good organizational skills and attention to detail., • Commitment to safety and adherence to protocols., • Flexibility to work various shifts, including weekends and holidays.

Job Description The design lead oversees the Design Team in successfully planning, executing, and delivering primarily large-scale projects. Responsibilities include: • Act as the primary design engineer of record and project lead for projects congruent with experience., • Provide regularly scheduled project reviews to review design progress, schedule, outstanding issues, etc. to provide guidance and support to design staff. • Sign and seal plan sets as appropriate for level of involvement in the project., • Create or direct schematic design layouts and establish initial design direction., • Plan out project tasks, priorities, timelines, and delegate tasks to project engineers and designers., • Perform QA/QC of delegated tasks., • Provide technical support and develop expertise of project engineers as necessary., • Communicate and coordinate with and between clients and design teams., • Provide design team assistance with complex RFIs and CA issues., • Provide guidance and/or generate Program of Requirements and Master Plans., • Help develop additional augmentation procedures and integration., • Generate proposals as necessary., • Meet deadlines., • Mentor staff on engineering design and project delivery., • Other duties as assigned and necessary. Education/ Experience: • Required: Bachelor of Science in Structural Engineering, • Preferred: Master's degree in Structural Engineering, • 5-10 years of engineering experience with project management experience, • Experience in the use of various structural design codes and specifications including but not limited to IBC, IRC, ASCE 7, ACI, PCI, AISC, NDS, and TMS, • Experience in design and detailing of various construction materials, including steel, cold formed metal framing, conventional and post-tensioned concrete, concrete masonry, and conventional and engineered wood, • Experience in the design and analysis of building structures, • Registered P.E. in the state of Texas, • Bluebeam, Autodesk REVIT, RISA, or RAM Structural System experience is a plus.

Job Description Job Title: Structural Engineer Location: San Antonio, TX Job Type: Full-Time Reports To: Engineering Manager Job Summary: We are seeking a motivated and detail-oriented Structural Engineer with 4–8 years of experience to join our growing engineering team. The ideal candidate will have experience in foundation design, and design of steel support structures for industrial equipment. This role requires a working knowledge of applicable structural design codes and standards including AISC 360 and ASCE 7-22. A Professional Engineer (P.E.) license is preferred, but candidates who are eligible and committed to obtaining licensure within one year will be considered. Responsibilities: • Perform structural analysis and design of steel structures, foundations, and support systems for industrial facilities and heavy equipment., • Prepare and review design calculations, construction drawings, and specifications in accordance with applicable codes and standards., • Coordinate with project teams, including civil, mechanical, and electrical disciplines to ensure cohesive and integrated designs., • Conduct site visits for field verification, inspection support, and to provide construction phase engineering services, as needed., • Review vendor data, submittals, and shop drawings for conformance with project requirements., • Mentor junior engineers and contribute to internal knowledge-sharing initiatives., • Bachelor’s degree in Civil or Structural Engineering., • 4–8 years of relevant structural engineering experience., • P.E. license or ability to obtain licensure within 12 months of hire., • Knowledge of geotechnical reports and integration of soil data into structural design., • Experience designing foundations for heavy industrial equipment or process systems., • Proficiency in conducting structural analysis and using relevant software tools, e.g., RISA., • Proficiency with AutoCAD, and experience with 3D modeling tools such as SolidWorks is a plus., • Solid understanding of structural codes and standards including AISC 360, ASCE 7-22, ACI 318, and IBC., • Strong written and verbal communication skills., • Experience in industrial project environments (e.g., manufacturing, energy, or material handling sectors)., • Competitive salary and performance-based bonuses, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays

Job Description CIVIL ENGINEERING DESIGNER – SAN ANTONIO ESP Associates is looking for motivated individuals with a strong desire to learn and a demonstrated ability to work in a team environment to join our team in San Antonio, TX. As a contributing team member of the Land Development group, you will have the opportunity to make an impact in the San Antonio area working on the design of residential, commercial, and multi-family projects. Additional responsibilities include construction document preparation for roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control. This is a great opportunity for a Civil Engineering professional to continue to grow his/her career in land development with a well-established and dynamic Engineering, Surveying and Planning firm! Responsibilities: • Perform work with a small team through civil site/land development design, permitting, and construction observation on a variety of residential, commercial, and institutional projects., • Develop strong relationships with team members., • Perform design of land development projects within Autodesk AutoCAD Civil 3D software., • Perform and prepare technical design calculations associated with land development projects (i.e., storm drainage hydraulic sizing, water distribution modeling, best management practices (BMP), sanitary sewer collection systems, erosion control measures, etc.)., • Perform preliminary engineering evaluations, including quantity take-offs and opinions of probable construction cost., • Perform site visits and prepare associated field reports., • Observe and provide general coordination for various field testing (i.e., water pressure testing, gravity sewer low pressure testing, manhole vacuum testing, etc.). Qualifications: • Bachelor’s Degree in Engineering (BSCE) or Engineering Technology (BSCET)., • EI/EIT certification required., • 2+ years of qualifying civil engineering design., • Previous experience with AutoCAD and/or Civil3D preferred., • Excellent written and verbal communication skills., • Strong desire to continue learning, advance professionally, and demonstrate ability to work in a fast-paced, design team environment., • Candidate must be able to pass a drug screen, background check, and have a satisfactory driving record in accordance with the company’s driving (MVR) policy. Corporate Information: ESP is a multi-discipline engineering design and consulting firm providing our clients with civil engineering, surveying, planning/landscape architecture, geosciences, environmental, subsurface utility engineering, and construction engineering inspection. Through years of dedicated service to our clients, ESP has received a designation of 194 on the 2024 ENR Top 500 Design Firm rankings. For the firm's primary territory, the ENR Southeast Top Design Firms, ESP received a 2024 ranking of 30. ESP offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description LEAD ENGINEER - PRINCIPAL ENGINEER - Avionics ARINC 653 Architect Who We Are: The Tactical Aerospace Department provides world-class research, design, services, and support to the DOD market. We provide avionics and payload/mission equipment for airborne systems and solutions to legacy issues for the DoD industry, Allies, and U.S. Government. Objectives of this Role: • Architect and design multi-partition, multi-DAL systems within a ARINC 653 environment., • Collaboratively work with teams to develop avionics grade systems for airborne and ground systems., • These teams consist of core disciplines across Systems, Electrical, Software, Firmware, and Mechanical engineering., • Mentor, guide, and develop complex embedded systems., • Development includes the full life cycle from requirements and architectures through V&V and integration., • Support Department management in specific marketing activities, writing proposals, and developing product/technology roadmaps., • Requires a Bachelors degree in Computer Engineering, Electrical Engineering, or equivalent engineering degree., • 8+ years: Experience designing embedded architecture designs within a RTOS multi partition, multi DO-178 DAL/Criticality environment. Experience with RTOS (Green Hills or DDC-I DEOS) development environment as well as LDRA. Experience with C/C++, • 2-5 years: Experience leading development and test engineering teams to meet program needs., • Experience with integrating software onto hardware and debugging within a lab environment utilizing equipment such as logic analyzers, power supplies, etc. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Applicant must be a U.S. citizen. Job Locations: San Antonio, Texas

Job Description About Us Catalyst Labs is a leading talent agency with a specialized vertical in Applied AI, Machine Learning, and Data Science. We stand out as an agency thats deeply embedded in our clients recruitment operations. We partner directly with: AI-first startups building products powered by LLMs, generative AI, intelligent automations, Established tech companies: scaling their ML infrastructure, recommendation systems, and data platforms, and Enterprise innovation teams integrating AI into traditional domains such as finance, healthcare, and logistics. We collaborate directly with founders, CTOs, and Heads of AI in those themes who are driving the next wave of applied intelligence from model optimization to productized AI workflows. We take pride in facilitating conversations that align with your technical expertise, creative problem-solving mindset, and long-term growth trajectory in the evolving world of intelligent systems. Our Client Is a San Francisco based startup building a GenAI-native platform that automates one of the most complex, time-consuming challenges in finance and Tax and turning dense tax documents into structured, usable data in minutes. Their system processes everything from K-1s and K-3s to intricate footnotes with near-human precision, achieving over 99% accuracy on income lines and streamlining workflows across Excel and API integrations. They serve some of the most sophisticated players in private wealth, and asset management, helping them move faster and make better decisions in an industry where accuracy and speed define competitiveness. Backed by seasoned founders and AI leaders from top-tier tech companies like facebook and salesforce, this team combines product craftsmanship with cutting-edge machine learning to bring intelligence to a domain that has long resisted automation. Recently acquired by a global technology leader, the company now operates with the mindset, pace, and creative autonomy of a startup but with the stability, benefits, and resources of an established enterprise. Youll be joining a team of proven builders whove scaled products to acquisition, engineered systems that power billions of data points, and are now applying GenAI to redefine how financial data is understood, structured, and acted upon. Location: Union Square, San Francisco Work type: Full Time, 5 days a week On-Site. Compensation: above market base + bonus + equity Visa: sponsorship available for candidates with demonstrated brilliance and expertise. What we are looking for Were seeking an Applied AI / ML Engineer with 5+ years of experience building and scaling commercial machine learning systems in meaningful ownership roles, especially with document understanding and extraction. You are an exceptional builder who thrives at the intersection of real world features and AI/ML engineering, someone who not only understands how models work, but also how to use them to deliver real, measurable value to end users. This role is central as they scale their GenAI-native platform for tax document processing, combining the velocity of a startup with the backing of resources and reach of a large multi national firm. Roles & Responsibilities * Build and scale the ML and product infrastructure that powers intelligent tax document processing at production scale. * Design and optimize inference systems, dataset pipelines, and specific logic to improve accuracy, speed, and quality as we expand to millions of documents. * Collaborate closely with accountants and tax domain experts to deeply understand workflows, pain points, and quality thresholds translating insights into productized ML systems. * Integrate inference pipelines into a seamless, end-to-end experience that transforms how tax professionals process and interpret documents. * Develop expert systems that encode institutional tax knowledge into scalable, maintainable software components. * Drive experiments, measure outcomes, and iterate rapidly on core ML metrics. * Collaborate cross-functionally with product, engineering, and leadership to shape technical direction and influence product vision. Qualifications Core Experience * 4+ years of experience in machine learning / AI engineering with proven end-to-end ownership of ML-powered products. * Strong track record of building systems that create direct user value, not just research prototypes or internal tooling. * Demonstrated ability to work with large, complex datasets, optimizing for accuracy, scalability, and reliability. Strong fundamental understanding of how to build, measure, and iterate on ML systems and ML-powered enterprise or consumer products. * Comfortable with Python and popular ML libraries (e.g. pandas, scikit-learn, spaCy, pytorch, tensorflow, keras), cloud providers such as GCP/AWS, container technologies (e.g. Docker, Kubernetes), web application development including Python-based web servers (e.g. Flask, Django), and database and storage layers (e.g. Postgres, SQL, S3/GCS). * Experience deploying or integrating LLMs, LLM APIs, Agents and prompt engineering into production systems. * Strong Python proficiency and hands-on familiarity with ML infrastructure and data workflows. * Experience in document understanding, OCR, or applied NLP. * Exposure to financial or tax-related data environments. * Startup or 01 product experience. Soft Skills * Exceptional problem-solving ability, curiosity, and product intuition. * Strong communication skills with the ability to engage directly with domain experts and translate complex needs into technical solutions. * Growth trajectory demonstrated through promotions or increasing scope of responsibility.

Job Description We are on a mission to become the leading force in residential property management services. The global residential property management industry is currently undergoing a digital transformation and Odevo is at the forefront of this transformation. Our mission is to radically simplify living for families and individuals by delivering highly attractive and efficient property management services to building owners and associations as well as to residents. Our core belief is that digital technology combined with great people will play a central role in delivering a step change how boards and residents experience property management. What we do matters to ordinary people. Residential real estate is the world’s largest asset class and buying a home is often the biggest investment a person or family will ever make. But the residential property management industry is lagging behind when it comes to customer focus and digitalization. That’s why we formed Odevo. Leading property management companies in the Nordics, UK, Germany and US have already joined forces to form Odevo and over the last 4 years Odevo revenues have grown 30-fold has grown to become a leading international player. Our ambition is to continue to grow rapidly organically and by attracting additional companies to join us in both existing and new markets. We deliver our property management services with custom developed software to simplify living and make life easier for property owners, association boards, residents and very importantly our own property management professionals. We make complex topics such as managing property finances and the daily maintenance of buildings easy and we automate time-consuming everyday tasks so people can spend more time on things that they really enjoy. We are a 10,000-employee company with a start-up mentality. We aspire to break new ground through innovation, and we actively cultivate a workplace where we can grow as individuals and have fun while achieving great things together. To continue our ambitious growth journey, we are now looking for people who share our vision to join us on a journey that will continue to transform the property management industry. • Organizationally savvy, with the ability to engage at all levels of an organization., • Ability to articulate new ideas and concepts to technical and nontechnical audiences., • Excellent presentation, communication and interpersonal skills., • Ability to communicate complex problems in a non-technical and simplified manner., • Attention to detail and excellent analytic skills., • Well organized and able to work on own initiative., • Flexibility to travel within the US., • Trusted and respected as a team member with strong collaboration and active listening skills., • Displays intellectual curiosity and integrity., • Motivated and driven by achieving long-term business outcomes., • Ability to work effectively in a team environment and cross-functional teams. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Infrastructure Design & Implementation o Design and deploy scalable infrastructure solutions across physical and cloud environments. o Configure and maintain Windows Server platforms, Active Directory, DNS, Azure services, and Microsoft 365. o Implement and manage Cisco networking solutions including access points, switches, routers, and firewalls. Cloud Operations o Assist in the migration and integration of workloads to Microsoft Azure. o Monitor cloud performance, cost optimization, and security compliance. o Implement and maintain backup and disaster recovery solutions across cloud and on-prem environments. Systems & Network Administration o Administer and monitor network infrastructure, ensuring high availability and performance. o Manage storage systems, virtualization platforms, and server hardware. o Support integrations between systems and services, including identity management and cloud connectors. Security & Compliance o Implement and maintain security controls across infrastructure layers. o Ensure infrastructure adheres to security policies and compliance standards. o Manage endpoint protection, patching, and vulnerability remediation. Monitoring & Troubleshooting o Use tools such as M365 Admin Centers, Azure Monitor, Cisco Meraki, and third-party solutions to track system and environment health. o Troubleshoot and resolve infrastructure-related issues across physical and cloud platforms. Collaboration & Support o Work closely with cross-functional teams including application, networking, security, and support teams. o Provide Tier 2/3 support for infrastructure-related incidents and requests. o Participate in infrastructure projects and contribute to continuous improvement initiatives o Maintain accurate documentation of systems, configurations, procedures, and incident resolutions. Ensure that our culture of fostering a collaborative and customer-focused environment helps our team be perceived as user-centric This position has no supervisory responsibilities. This job operates in a professional office or home environment. This role routinely uses standard office equipment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee will be required lift objects up to 25 lbs. This is a full-time position and hours of work are Monday through Friday, 8:30a.m. to 5:30p.m. Occasional evening and weekend work may be required as job duties demand. This schedule may change to accommodate the business needs of the company. Travel will be required to attend company and client meetings and trainings, as well as visit with partners. Education and Requirements: • Bachelor’s degree in computer science, Information Technology, or related field (or equivalent experience), • 3–5 years of experience in IT infrastructure engineering, with hands-on experience in Microsoft and Cisco environments, • Proficiency in Microsoft 365, Active Directory, Azure, Microsoft Intune, and Windows Server, • Familiarity with PowerShell and other scripting tools for automation, • In-depth knowledge of networking technologies (LAN/WAN, VLANs, firewalls, VPNs), • Network+, Security+, CCNA, Microsoft Certified: Azure Administrator Associate, Microsoft Certified: Windows Server Hybrid Administrator Associate, Microsoft 365 Certified: Endpoint Administrator Associate, Microsoft 365 Certified: Teams Administrator Associate, or related technical certifications preferred, • Excellent communication and interpersonal skills, • Proficiency in using Service Desk ticketing software and remote management tools, • Able to communicate fluently in English, both written and verbal, • Understanding of IT service management (ITSM) and Information Technology Infrastructure Library (ITIL) principles, • Strong technical and troubleshooting skills specific to IT hardware, software, and cloud platforms, • Awareness of the importance of Security and GDPR requirements

Job Description THE OPPORTUNITY Our client is looking for an experienced Civil Engineer and Project Manager with 10 or more years of experience in planning, design, and project management on municipal water and wastewater treatment and facilities projects to work from any of their Texas offices located in Austin, Round Rock, San Antonio, and Houston. Recent and ongoing projects include planning, evaluation and design of water and wastewater treatment plant expansions and process improvements, pump stations, and lift stations. Primary responsibilities for this position include: • Leading multidisciplinary teams in the preparation of technical reports, plans, and specifications for various water treatment, wastewater treatment, and pump station projects., • Preparing facility assessment and design reports, design calculations, process and/or hydraulic modeling, selecting and sizing equipment, preparing design documents and construction documents, supporting construction phase services both in the office and in the field., • Project management includes task, budget, and schedule management, as well as client interaction., • Bachelor's Degree in Civil Engineering, • Texas PE license or the ability to obtain a Texas PE license within 12 months of hire., • More than 10 years of experience in municipal water and wastewater facilities design with emphasis on process evaluation, design, and construction of municipal water and wastewater treatment plants., • More than three years of experience in project management and client service, including successful budget and schedule controls., • 3 or more years of experience in managing and mentoring junior staff, • Experience with BioWin, Sumo and/or GPS-X process models, • Opportunity to succeed in your career, • A competitive salary, • Medical, Dental, and Vision, • Company paid Disability (includes paid Maternity Leave), & Life Insurance, • Health Savings Accounts (HSA) with Employer Contribution, • 401(k) Retirement plan with employer match, • Paid time off and eight paid holidays

Job Description Job Title: CYBER Training Range Engineer Level – Senior Location – Hurlburt Field, FL, Joint Base San Antonio, TX Job Description: X Technologies is seeking a Cyber Training Range Engineer to support the 39th Information Operations Squadron (39 IOS) with from Joint Base San Antonio, TX, or Hurlburt Field, FL. What You'll Be Doing: You will comprehend the 39 IOS mission, the cyber training ranges and Weapon Systems associated with the training requirements. You will augment and support mission support functions in the areas of course management support, faculty development, planning, project management, administrative support, facility management, cyber range systems, communications and information technology systems, audio visual (AV) systems in unclassified and classified environments. You will purchase and install CTRE hardware and software at the Governments request. CTRE is essential to conduct psychomotor (hands-on) training for Cyber Weapon Systems (CWS) IQT, and work role training, which is focused on individual and not team or crew training environments. You will ensure CTRE equipment meets the following system requirements: Risk Management Framework (RMF), Security Technical Implementation Guides (STIGs), and Approved Product List (APL) for unclassified and classified networks, a six-year lifecycle, or higher and takes advantage of available electrical service, and Heating Ventilation and Air Conditioning (HVAC) space, without modifying the current building infrastructure. You will maintain compatibility with current CTRE hardware and software, and the DAFNET while maintaining virtual machine compatibility with the AF Life Cycle Management Center (AFLCMC) fielded CWS and/or Joint platforms and systems and the current curricula, training mission, and mission evaluation lessons. You will allow and enhance the capability of the course developers and the instructors to provide courseware (cognitive and psychomotor or lecture and hands-on) that meets or exceeds the ACC Training Task List (TTL) or Joint requirements along with the ability to repair/replace components, same day, if required, to ensure continuity of training, while keeping associated costs and training lapse times to a minimum. You will enable the ability to scale to meet increased tasking TPR at multiple locations and classifications without additional engineering or other build considerations; the system must simultaneously support at least three 30-student classrooms and at least 60 staff members (instruction and development) including but not limited to: at least 30K simultaneous virtual machines, You will enhance the capability to provision and de-provision a full classroom of 30 students and four instructors, with a minimum of 150 virtual machines, each in an isolated training "sandbox" in commensurate with the Director of Operations approved class schedule as well as replicating data across the CTRE mesh network with no additional translation or reprogramming required. You will enable the ability of current operators to dynamically assist, take-over, or restart any students training environment without disrupting the current classroom lesson for any other student(s), compatibility with the evolution and next generation CTRE mesh environment; and perform live back-up and restore from any node on the mesh network to any other node on the network. What Required Qualifications You'll Bring: • Bachelor of Science degree, • 7 years of experience applying the CYBER Training Range Engineering fundamentals, • IAT/M Level III Cert (CASP +, VCP, CISSP, CCNP, GCED, CASP CE), • Ability to travel CONUS and OCONUS Occasionally. Must have a current passport or able to acquire within the first 60 days of employment, • Clearance - Top Secret/SCI

Job DescriptionCompany Description The City of San Antonio's mission is to deliver quality City services and commit to achieve San Antonio's vision of prosperity for our diverse, vibrant, and historic community. Our approximately 12,000 employees are critical in the delivery of quality services to the residents of the City of San Antonio. The commitment our employees demonstrate to their jobs and to the advancement of the City's goals is the key to our success in mission accomplishment. The City of San Antonio has identified four core values - Teamwork, Professionalism, Integrity, and Innovation - to efficiently and effectively inspire, motivate, lead, develop and empower employees in order to serve the public economically, ethically, equitably, and continuously improve and promote the high performance of government. To ensure commitment to these values and to further integrate them with our organizational mission and vision, it is imperative that we seek these behaviors in the people we hire. Job Description Under direction, is responsible for performing engineering work which requires a considerable level of analysis and detailed calculations. Working conditions are primarily in an office environment. Exercises direct supervision over assigned staff and functional and technical supervision of project staff. Work Location Northwest Service Center - 6939 W Loop 1604 N, Bldg. 2, San Antonio, TX 78254 Work Hours 7:45 a.m. - 4:30 p.m., Monday - Friday To Apply Essential Job Functions • Responsible for creating design specifications for various public works projects., • Performs detailed engineering calculations., • Prepares analysis reports of assigned engineering projects., • Performs site assessments and environmental assessments as needed., • Conducts public meetings and various public relations tasks which may include media briefings., • Supervises assigned staff in the day-to-day operations and directs project staff as needed., • Responds to citizen inquiries and complaints regarding assigned projects., • Provides technical assistance to other divisions and departments., • Coordinates with other divisions, departments, or municipal agencies on projects under design., • Meets with consultants on various projects to discuss designs and design problems., • Performs related duties and fulfills responsibilities as required.Qualifications, • Bachelor's Degree in Engineering from an accredited college, university or engineering school approved by a State Board of Registration for Professional Engineers., • One (1) year of engineering experience., • No substitution for education allowed., • Valid Class "C" Texas Driver's License., • Engineer-in-Training (EIT) certification in the State of Texas., • OR Engineer-in-Training (EIT) certification from another state with the ability to obtain an EIT Certification in the State of Texas within 6 months of employment. Preferred Qualifications • Civil Engineer, • Traffic or Transportation experience. Additional Information For more information and to submit your application, visit the City of San Antonio's website at:

Job Description licensed Civil Engineer Full job description Our Client is looking for the next great addition to our team! Client is a well-respected, innovative and growing Civil Engineering/Transportation firm located in beautiful city of San Antonio in South-Central Texas. They pride themselves on working collaboratively to provide their clients with the highest quality of service. Their work environment is fast-paced, client-focused and fun! Client contribute their talents to the planning, design and completion of a variety of Transportation and Roadway projects. They specializes in Roadway, Drainage, Traffic, Construction Management and Inspection services for public agencies and private developers. Client currently has long-term public works contracts with both the State and Local municipalities and are looking to add to the team. If you are an experienced, licensed Civil Engineer who is interested in growing your career with an innovative, South-Central Texas-based firm we would like to hear from you! What can our client offer you? · A competitive compensation package. · 401(k) retirement savings plan. · Medical, dental and vision benefits; 100% employer paid option for employees. · State-of-the-art technology, systems, tools and resources. · Continuing education is encouraged and supported. · Career growth opportunities. · A fantastic office and location! Our office is located near Callaghan / IH10 · Work that is fast-paced and goal-oriented. · A dynamic team that is supportive, friendly and fun. · A Company culture of giving back to the community. What skills and experience can you bring to the GKW team? · 8+ years Civil Engineering experience in Transportation Design. · Four-year Civil Engineering degree is required. · Texas Civil Engineer’s license. · Knowledge of national and local codes and agency standards is a plus. · Self-motivated, proactive, and detail-oriented. · Strong skills in Leadership, Project Management & QA/QC · Effective written and oral communication skills including proposal and report writing. · Experience tabulating bid items, calculating construction bid quantities and developing cost estimates. · Personal responsibility for completing quality work within budgets and timelines. · Proven ability to work as part of a multi-disciplinary team. · Responsiveness and flexibility; you adapt easily to changing priorities. · Familiarity with Bentley MicroStation and/or OpenRoads Design is a plus. · MS Office experience including Word, Excel and Outlook. · Comfortable networking with clients and colleagues to develop and maintain professional relationships. Client is a rapidly growing South-Central Texas-based Civil Engineering/Transportation firm. We offer Civil Engineering, Planning, Construction Management and Inspection services that best meet our valued clients’ needs. What is it like to work at our Client? They believe in: · Honesty and Transparency- We are open, trustworthy and truthful. · Excellence- Our work is our art; we take pride in the quality of work provided to our clients every day. · Client-Centered- We never forget that client satisfaction is our goal. · Rolling Up Our Sleeves- Lending a hand, hard work and doing what it takes to get the job done. · Continuous Improvement and Professional Development- Learning, improving, innovating and sharing knowledge. · Creativity- Thinking “outside of the box” to deliver winning soluti

Job DescriptionSalary: At Bridgehead IT, we believe technology should not only work, it should inspire confidence, solve real problems, and help businesses achieve more than they thought possible. We are looking for a DevOps Engineer IV who understands that designing and supporting systems is both an art and a responsibility. You will design infrastructure that is secure, scalable, and resilient, and you will support it with discipline and care so it performs when it matters most. You will not only automate pipelines, you will create systems that feel effortless. You will not only fix problems, you will anticipate them, solve them, and leave things better than you found them. If you are ready to use your skills to build something extraordinary and make a real impact, this is the opportunity for you. Key Responsibilities: • Design and support multi-cloud infrastructures (Azure and AWS) that deliver security, scalability, and reliability., • Automate with excellence by developing CI/CD pipelines, infrastructure as code, and monitoring systems that eliminate inefficiency., • Solve meaningful problems by troubleshooting complex issues and creating solutions that last., • Lead through mentorship by guiding junior and mid-level engineers and raising the bar for technical execution., • Champion containerization by designing and managing Docker and Kubernetes environments at enterprise scale., • Establish clarity by documenting architectures, standards, and processes that others can trust and follow., • Collaborate with development, security, and operations to embed DevOps principles in everything we deliver., • Innovate thoughtfully by staying ahead of emerging technologies and applying them with purpose., • Respond with confidence during on-call rotations, leading through critical events to protect stability and client trust. Skills and Qualifications: • Bachelors degree in Computer Science, IT, or related field (or equivalent experience)., • 7+ years of DevOps, cloud engineering, or related experience., • Deep knowledge of AWS and Azure platforms., • Strong experience with CI/CD tools such as Jenkins or GitLab CI., • Proficiency in scripting (Python, Bash, PowerShell)., • Hands-on with infrastructure as code (Terraform, CloudFormation, ARM templates)., • Advanced expertise with Docker and Kubernetes., • Experience with Ansible, Puppet, or Chef., • Skilled in managing both Linux and Windows environments., • Strong troubleshooting, communication, and leadership skills., • Preferred certifications include Microsoft Certified: Azure Solutions Architect Expert, Microsoft 365 Certified: Enterprise Administrator Expert, AWS Certified Solutions Architect - Professional, and CompTIA Cloud+. Why Bridgehead IT? Here, your work matters. You will design systems that empower businesses to grow, and you will support them, so they perform when they are needed most. You will have the freedom to bring bold ideas forward and the responsibility to turn them into reliable solutions. This is where vision meets execution. Where bold ideas are turned into systems people can rely on every day. Where your expertise does not just keep the lights on, it changes how businesses run. If you are ready to design, to support, and to inspire, apply today. Employment Qualifications: • Must be legally authorized to work in the U.S. without sponsorship. Bridgehead ITis proud to be an equal opportunity workplace and is an affirmative action employer.

Job DescriptionWho We Are - ThermonThermon is a diversified technology company and a global leader in industrial process heating, temperature maintenance, environmental monitoring and temporary power distribution solutions. We deliver engineered solutions that enhance operational awareness, safety, reliability and efficiency to deliver the lowest total cost of ownership.Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency.We care deeply about the success of our customers, the well-being of our people, and the reliability of every product we design. This drives our unwavering commitment to safety and integrity in everything we do. Through collaboration, we unite a rich legacy of expertise with a trusted global team, partnering side-by-side with our customers. We transfer the warmth needed to make life work. The Manufacturing Engineering Manager manages a team, resources and activities through Manufacturing Engineering in San Marcos manufacturing facility campus; ensure that all projects and activities are being planned, scheduled, and tracked in accordance with prescribed methods and procedures; coordinate and direct project and department activities, making detailed plans to accomplish goals and directing the integration of technical activities. Key Responsibilities and Accountabilities include • Lead, mentor, and develop a high-performing team of engineers and technicians in a collaborative, accountable environment., • Drive operational efficiency and performance through Lean Manufacturing, Six Sigma, and Kaizen methodologies., • Be responsible for engineering projects from concept to deployment, ensuring timely, on-budget, and high-quality outcomes., • Collaborate cross-functionally to implement solutions that improve production, quality, and maintenance processes., • Leverage automation, emerging technologies, and data-driven insights to optimize workflows., • Ensure alignment to product quality standards, safety protocols, and regulatory compliance., • Handle departmental budgets and capital expenditures in alignment with operational objectives., • Implement cost-saving initiatives through innovative technologies and process improvements., • Other as assigned by management.Qualifications, • Bachelor's Degree in Engineering, or related field, • 7+ years of manufacturing engineering experience, • Experience with plastic extrusion processes and equipment, • 3+ years in a leadership role is preferred, • Master's degree in Mechanical, Electro-Mechanical, Industrial, or Manufacturing Engineering is a plus, • Lean Six Sigma certification (Green Belt, Black Belt, or Master Black Belt) is a plus, • Proven success in Lean Manufacturing and Six Sigma methodologies, • Confirmed project management capabilities and experience driving cost-effective, scalable improvements, • Strong mechanical proficiency and root cause analysis skills, • Proficiency with AutoCAD and/or CREO and Microsoft Office tools Working Conditions • Must be able to traverse across San Marcos, TX different buildings by walking., • Regularly stand/walk/seat for periods of time across the office/manufacturing facility. We transfer the WARMTH needed to make life Work. At Thermon, we don't just create jobs; we develop careers. Thermon has become a global leader in industrial heating due, in no small part, to our employees' hard work and dedication. To help foster those employees, we've created a company culture that encourages our values of Care, Commit and Collaborate.

Job DescriptionBridgePhase is a software engineering company focused on designing, building, securing, and operating cutting-edge software solutions that drive mission success and operational excellence for Federal Government organizations. We are dedicated to supporting the Air Force's commitment to technological superiority by providing innovative software engineering services that enhance operational efficiency, security, and agility. We strive to be a trusted partner in advancing the Air Force's mission of maintaining global readiness and dominance through superior software capabilities. We’re looking for well-rounded engineers to join our growing team of DevSecOps and Cloud Infrastructure practitioners supporting the U.S. Air Force Unified Platform Software Factory. Based in San Antonio, the Unified Platform consists of a diverse group of industry experts that leverage agile methodologies and state-of-the-art DevSecOps practices to deliver rapid, impactful solutions to the U.S. Air Force and U.S. Cyber Command. In this role, you'll be responsible for designing, implementing, and maintaining cloud-native platforms and infrastructure. You'll focus on creating scalable, reliable, and secure systems using AWS services, Kubernetes, and Infrastructure as Code principles. Ideal candidates are passionate about building robust, automated platforms that enable development teams to deploy and manage applications efficiently. We seek innovators who can balance technical expertise with a strong understanding of business needs to create solutions that drive organizational success. In this position, you can expect to: • Design and implement cloud-native architectures on AWS, • Develop and maintain Infrastructure as Code (IaC) using tools like Terraform, CloudFormation, or AWS CDK., • Build and optimize Kubernetes clusters on Amazon EKS, including networking, storage, and security configurations., • Implement and manage CI/CD pipelines using GitLab, • Design and implement monitoring, logging, and alerting solutions using tools like Prometheus, Grafana, and AWS CloudWatch., • Develop and maintain Helm charts for application deployments on Kubernetes., • Implement security best practices and compliance measures across the platform., • Automate operational tasks and create self-service tools for development teams., • Collaborate with development teams to improve application deployment processes and platform usability., • Continuously evaluate and integrate new technologies to enhance the platform's capabilities., • Implement and maintain security controls in accordance with DoD standards such as NIST SP 800-53, DISA STIGs, and the DoD Enterprise DevSecOps Reference Design, • Maintain and optimize AWS cloud infrastructure and cloud-based resources, • Integrate DevSecOps tools and services to enable automated pipelines that support customer applications throughout their SDLC. Preferred Experience and Qualifications: • Strong experience with AWS services and architecture best practices., • Proficiency in Infrastructure as Code tools, particularly Terraform., • Hands-on experience with Kubernetes, preferably Amazon EKS., • Familiarity with container technologies such as Docker., • Experience with CI/CD tools and practices., • Strong scripting skills in languages such as Python, Bash, or Go., • Knowledge of networking concepts and implementation in cloud environments., • Experience with monitoring and observability tools., • Familiarity with GitOps principles and tools like ArgoCD or Flux., • Strong problem-solving skills and ability to troubleshoot complex systems., • Excellent communication skills and ability to work effectively in cross-functional teams., • AWS certifications (e.g., Solutions Architect, DevOps Engineer) are a plus., • Experience with service mesh technologies (e.g., Istio) is beneficial., • Desire to work in a ‘badgeless” collaborative team environment consisting of Government clients, other Contractors, and Stakeholders, • Strong desire to work in team environment and learn new skills, • Active Secret Clearance is required, • B.S. in Engineering, Computer Science, or technical degree or industry experience equivalent About Our Company: At BridgePhase, our values shape our culture and guide our actions. We act with integrity, honesty, and respect, earning trust and fostering collective success. We are critical thinkers and problem solvers, driving innovation and positive disruption to solve hard challenges at speed and scale. Our work is characterized by courage, compassion, commitment, and teamwork. We apply disciplined engineering principles and a proven agile approach that deliver flexible, simplified, durable and performant solutions that drive continuous improvement and have lasting impact and sustained value. Additionally, we invest in our communities through strategic charitable initiatives, empowering our employees to make meaningful contributions to causes they are passionate about. Our Benefits: We pride ourselves on providing top-tier benefits that rival those found in larger organizations. Below are some of the perks our team enjoys: • Competitive compensation that reflects your skills and impact, • Multiple bonus programs rewarding performance, company growth, and employee referrals, • Flexible PTO with 20 days to use when you need them, • All federal holidays paid to help you truly recharge, • Paid sick leave because health always comes first, • 100% paid parental leave including 16 weeks for maternity and 6 weeks for paternity, • 401(k) with 6% match and no vesting period, • Top-tier medical, dental, and vision plans with low out-of-pocket costs, • Short- and long-term disability and life insurance included, • Pet insurance to support your four-legged family, • Annual professional development budget for training, certifications, and conferences, • Two paid community service days for causes that matter to you qV67ZcZfx5

Job Description Position Summary The Injection Molding Engineer at Toyoda Gosei Texas is responsible for developing processes for new products and optimizing existing ones to achieve target for quality level, cycle time, and yield by hands on setup and processing of injection molds. Including building of pick and place robot EOATs and robot programming and troubleshooting injection molding processes to support the production of high-quality interior and exterior parts for Toyota Tundra, Tacoma, and Sequoia vehicles. This role plays a critical part in ensuring waste reduction and quality performance, aligning with Toyoda Gosei’s commitment to lean manufacturing and continuous improvement. Key Responsibilities • Process Optimization: Establish and refine molding parameters to maximize efficiency, minimize scrap, and ensure consistent quality., • Troubleshooting & Problem-Solving: Diagnose and resolve defects, machine issues, and process inefficiencies scientific molding principles., • Tooling & Equipment Management: Work with tooling suppliers and internal teams to ensure proper mold maintenance, modifications, and performance optimization., • Material & Machine Parameters: Select appropriate materials (PP, ABS, Nylon, and other automotive-grade resins) and set up injection molding machines for optimal production., • Continuous Improvement: Apply Toyota Production System (TPS), Kaizen, and Lean Manufacturing principles to drive cost savings and efficiency improvements., • Quality Control: Ensure parts meet IATF 16949 and ISO 14001 quality standards, utilizing DOE (Design of Experiments) and other statistical methodologies., • Collaboration: Work closely with production, maintenance, and quality teams to drive improvements in safety, efficiency, and defect reduction., • New Product Development: Assist in launching new molds, engineering changes, and process development for upcoming Toyota model updates., • Waste Reduction: Decrease scrap rates and improve first-pass yield., • Quality Performance: Ensure defect-free parts that meet Toyota’s stringent quality expectations., • Education: Bachelor’s degree in Plastics Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field. Equivalent experience may be considered., • Experience: 5 to 10 years of injection molding experience (preferably) in a Tier 1 automotive manufacturing environment., • Technical Knowledge:, • Strong experience with Yushin, Yaskawa (Motoman), Star,Fanuc, UR Robots and injection molding machines., • Understanding of hot runner systems, mold flow analysis, and mold maintenance., • Expertise in scientific molding, decoupled molding, and root cause analysis (5Why, Fishbone, etc.)., • Familiarity with Toyota Production System (TPS), Lean Manufacturing, and Six Sigma methodologies., • Software Proficiency: Experience with Moldflow, CAD software (SolidWorks, AutoCAD), and ERP/MES systems., • Bilingual (Preferred): English/Spanish is a strong plus., • Work Environment: Manufacturing facility with exposure to noise, machinery, and varying temperatures., • Physical Requirements: Ability to stand, walk, and lift up to 50 lbs. as needed for troubleshooting and machine setup.

Job Description Job description Job Title: Maintenance Worker Department: Maintenance Reports to: Manager of Facility Position Description: Will have overall responsibility for seeing that the grounds and buildings are the best they can be for our Residents and the Community. Qualifications: Experience with carpentry, plumbing, painting, electrical, hvac repair, grounds maintenance, and general overall repair. Duties and Responsibilities: • Treat Residents with respect and dignity, • Treat other staff with respect and dignity, • Attend to any and all maintenance needs of the Residents that Care Aides are unable to do or need assistance., • Prepare resident rooms for new residents by making the room in like-new condition, • Keep common areas painted and in like-new condition, • Assist new residents with moving in, • Assist in moving residents from within the campus, • Keep all interior lights working, • Maintain filters in all heating and cooling units (bimonthly), • Keep stove hood filters clean (bimonthly), • Maintain grounds in a pristine manner. If you need assistance with some aspect of the grounds, notify Management., • See that the landscape sprinkler system is in working order., • Maintain the planting beds and statue areas, • See that sidewalks and exterior walkways are clean and free of debris. This includes outside entry ways, • Maintain exterior lighting including pole lights and ornamental lighting, • Maintain and keep all trash receptacle areas clean, • Maintain the exterior of buildings including keeping the outside windows clean., • Keep maintenance room well maintained and in working order, • Other responsibilities as required Reports to: Manager of Facility

Job DescriptionSalary: Civil Engineer / Project Manager Join a team where your expertise drives impactful projects across the country! About Paradigm Design Paradigm Design is a nationally recognized civil engineering and architectural firm specializing in land development and infrastructure projects across diverse markets including education, entertainment, retail, industrial, warehousing, residential, and public infrastructure. At Paradigm, people are at the heart of everything we do. We foster a culture of collaboration, inclusivity, and professional growth, where all team members contributions are valued. With a commitment to mentorship, teamwork, and technical excellence, we provide the tools, resources, and support you need to succeed. The Opportunity We are seeking an experienced Civil Engineering Project Manager to lead land development and infrastructure projects from concept through completion. This client-facing leadership role combines project delivery with mentorship of junior staff. This position requires candidates to be located in one of our active or expanding markets: In this role, you will have the opportunity to: • Lead exciting, high-impact land development and infrastructure projects., • Collaborate with multidisciplinary teams and build lasting client relationships., • Mentor and develop junior engineers, helping shape the next generation of talent., • Play a key role in expanding Paradigms civil engineering presence across multiple markets. What Youll Do • Lead the planning, design, entitlement, and construction phases of civil engineering projects., • Manage scope, budget, schedule, and quality to ensure successful delivery., • Prepare and review proposals, contracts, budgets, reports, drawings, and technical specifications., • Coordinate with clients, contractors, consultants, regulatory agencies, and internal teams., • Oversee site development, roadways, utilities, stormwater management, and drainage design., • Conduct site inspections and provide technical support throughout project execution., • Serve as the primary client liaison, maintaining proactive communication and building strong partnerships., • Mentor and guide project teams, fostering growth and collaboration., • Promote continuous improvement in project processes and engineering practices. What You Bring • Bachelors degree in Civil Engineering (or related field)., • Professional Engineer (PE) license required., • 7+ years of civil engineering and project management experience, with a strong background in land development., • Proven success delivering complex projects on time and within budget., • Proficiency in AutoCAD Civil 3D and relevant software (HEC-RAS, etc.)., • Strong technical expertise in site development, grading, utilities, and stormwater management., • Excellent interpersonal, communication, and leadership skills., • Ability to manage multiple priorities in a fast-paced environment., • Willingness to travel occasionally for site visits. Why Paradigm? We know you work hard, so we make sure youre supported and valued with: • Competitive salary + bonus opportunities, • Comprehensive benefits (medical, dental, vision, life, disability), • 401(k) with company match, • Paid parental leave + flexible schedules, • Monthly team events (golf outings, happy hours, volunteer days, etc.), • A collaborative, people-first culture that values your growth and contributions Ready to Make an Impact? If youre ready to take your career to the next level and be part of a supportive, dynamic team, wed love to hear from you! Learn more about us: LinkedIn - Paradigm Design At Paradigm Design, we celebrate diversity and believe our work is better when many voices are at the table. We are proud to be an Equal Opportunity Employer and invite talented individuals of all backgrounds to join our team.

Job Description Senior AWS Cloud Platform Engineer Full Time San Antonio, TX (Onsite/Hybrid) Top Secret/SCI Clearance Referral Bonus: up to $3,000.00 Sign-On Bonus: up to $3,000.00 Job Responsibilities: Will provide subject matter proficiency for work described in the task. Responsible for providing analytical skills to support process improvement, specialized studies, and definition of requirements Job Description: • Must have experience with using and provision cloud services (AWS)., • Must provide subject matter expertise with application lifecycle management as it pertains to containerized Kubernetes clustered environments., • Responsible for the installation, orchestration, execution, configuration, security and validation of clusters., • Must have a thorough understanding networking and DNS, scheduling, troubleshooting and logging and monitoring of relevant areas., • Participates in establishing architectural standards that enable DevOps practices like infrastructure as code, policy as code and CI/CD., • Proficiency in AWS tools such as: Kubernetes, EKS, Diode, Lambda etc. (not all inclusive) orchestrated/deployed in a cloud environment Qualifications: • Bachelor's or master's degree in computer science, Engineering, or related field (or equivalent experience), • Proven experience (6-8yrs.) as a DevOps Engineer, AWS Engineer, or similar role, • Strong proficiency with AWS services (EKS, CloudFormation, Lambda, S3, EC2, etc.), • Hands on experience with CI/CD pipelines and version control, • Strong knowledge of scripting languages (Java, Bash, etc.) for automation tasks, • Experience with docker and container orchestration (Kubernetes), • Five (5) years applied experience on containerized platforms., • IAT II Certification A Senior AWS Cloud Platform Engineer should have AWS Kubernetes CKA certification or training and at least two of the listed AWS certifications (or training). Three (3) years proven relevant experience may be substituted as applicable to each certification. • AWS Cloud Practitioner Certification or training, • AWS SysOps Administrator Certification or training(desired), • AWS DevOp Engineer Certification or training(desired) About Semper Valens Solutions: Semper Valens Solutions, Inc. (SVS) is a Service-Disabled Veteran Owned Small Business (SDVOSB) providing Cost Effective Software and Systems Engineering, Field Support, Training and Full Life cycle Support Management to the DOD and VA community. At Semper Valens, our vision is to remain a creative, cutting edge and cost-effective solutions provider where our shared intellect, industry experience, and technology excellence, make a positive difference in our customer's success. Our solutions help bridge the gap between IT and business prioritizations to optimize budgets, risks and operational processes. We search for outstanding technical professionals, hiring at all levels of the experience spectrum; intermediate, journeyman and senior. Consider us for your career plan. Semper Valens Solutions is an Equal Opportunity Employer Semper Valens Solutions proactively fulfills its role as an equal opportunity employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, religion, age, sexual orientation, gender identity and expression, national origin, marital/parental status, pregnancy/childbirth, or related conditions, physical or mental disability, genetic information, status as a Disabled Veteran, Recently Separated Veteran, Active-Duty Wartime or Campaign Badge Veteran, Armed Forces Services Medal, or any other characteristic protected by law. If you require a reasonable accommodation to apply for a position with Semper Valens Solutions through its online applicant system, please contact Semper Valens Solutions Human Resources Department at (830) 899-6870. Semper Valens Solutions is an affirmative action/equal opportunity employer - minorities, females, disabled, and protected veterans are urged to apply. Applicants have rights under Federal Employment Laws. All Jobs at Semper Valens Solutions:

Job Description Database Engineer Irys Technologies is looking for a talented Database Engineer in the Austin or San Antonio area to design, optimize, and secure our data infrastructure. This position will play a critical role in managing high-performance databases, with a mandatory expertise in Redis DB, implementing cryptographic solutions, and ensuring data integrity for our mission-critical applications. Proficiency in GitHub Flow is essential for collaborative development. Bonus points for expertise in blockchain technology, as we explore decentralized data solutions. Project Duration: 4-6 Months Workplace Type: Primarily Remote; In-office may be required on an as needed basis. If needed, the office is located in downtown San Antonio, TX. Responsibilities • Design, implement, and maintain scalable database systems using Redis DB (mandatory) and SQL (PostgreSQL, MySQL)., • Optimize database performance through indexing, query optimization, and caching strategies with a focus on Redis DB., • Implement cryptographic techniques (e.g., encryption, hashing, key management) to secure sensitive data., • Develop and maintain data pipelines for real-time and batch processing., • Collaborate with backend engineers to ensure seamless integration with application layers., • Use GitHub Flow for version control, including managing database schema changes and scripts via pull requests., • Monitor database performance, troubleshoot issues, and ensure high availability., • Document database schemas, security protocols, and operational procedures., • Bachelor's degree in Computer Science, Data Engineering, or a related field (or equivalent experience)., • 3+ years of experience in database engineering or administration., • Mandatory expertise in Redis DB for in-memory data storage, caching, and high-performance applications., • Proficiency in SQL databases (PostgreSQL, MySQL) and query optimization., • Strong understanding of cryptography principles (e.g., AES, RSA, SHA-256) and their implementation., • Proficiency in GitHub Flow, including branching, pull requests, and collaborative workflows., • Experience with data modeling, schema design, and normalization/denormalization., • Familiarity with database security practices, including encryption at rest and in transit., • Proficiency in scripting languages (Python, Bash) for automation and data processing., • Experience with version control (Git) and CI/CD for database deployments., • Knowledge of blockchain technology (e.g., Ethereum, Hyperledger) and its applications in data management., • Experience with NoSQL databases (MongoDB, DynamoDB) for diverse workloads., • Familiarity with distributed systems and eventual consistency models., • Understanding of data warehousing and ETL processes (e.g., Apache Spark, Airflow)., • Certified Information Systems Security Professional (CISSP), • AWS Certified Database - Specialty, • Microsoft Certified: Azure Database Administrator Associate, • PostgreSQL Certified Professional Inclusion & Diversity Irys Technologies is an Equal Opportunity/Affirmative Action Employer. Applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Disclosure Irys Technologies is an equal opportunity employer that uses E-Verify to confirm work authorization. Background investigations may be conducted to determine applicant's eligibility for a Department of Defense security clearance. EEOC Know Your Rights If you are unable to use our online application to apply for this position, please use one of the following options to submit your resume and qualifications: • Mail to our corporate office:

Job Description Summary Serves as technical expert and supports activities of the Company related to technical sales and product development of aircraft interior details, sub-assemblies, complete monuments, tooling design/fabrication and supports production efforts in all aspects to ensure project completion objectives are met. Essential Duties and Responsibilities • Provides guidance for manufacturing methods used for fabrication ensuring best manufacturing practices are used to obtain desired results., • Examines monument drawings provided by Engineering to verify buildability and signs off before Production begins., • Provides tooling recommendations, requirements, and fabrication of such, etc. and production training recommendations including sharing lessons learned., • Leads initial drawing reviews and gathers suggestions for preferred manufacturing techniques., • Orders veneers and hardwoods, as well as veneer mapping. Manages and issues veneers, as needed to the allotted monuments., • Responsible for assigned project production planning and layout, organizational set up, progress reporting and departmental coordination to ensure a successful project completion., • Provides technical oversight to a broad range of projects while leveraging emerging technologies, innovation, and creativity., • Resolves technical issues using solutions that involve re-use of existing company designs (as applicable) and new techniques, technologies, or concepts as needed., • Ensures engineering designs take full advantage of technologies available while focusing on cost, schedule, and quality., • Monitors progress of projects, confers with Directors, Managers, and Certification staff to ensure efficient accomplishment of plans., • Provides manufacturing technical leadership and guidance to engineers working on projects., • Handles special projects and/or be assigned challenging projects., • Facilitates R&D activity between Engineering and Manufacturing., • Provides direct feedback to management regarding all project visibility., • Maintains regular attendance including being at work, being on time to work and working full shifts. Greenpoint Core Competencies • Adaptability - Adapts to changes in the work environment, manages competing demands, and accepts constructive criticism/feedback and changes approach or method to best fit the situation., • Communications - Expresses ideas and thoughts effectively in verbal and written form, exhibits good listening and comprehension, keeps others informed, and uses appropriate communication methods., • Dependability - Responds to requests for service and assistance, follows instruction and responds to management direction, takes responsibility for own actions and doing the best job possible, keeps commitments, and maintains reliable attendance., • Initiative - Sets and achieves challenging goals, demonstrates persistence and overcomes obstacles, measures self against standard of excellence, recognizes and acts on opportunities, and takes calculated risks to accomplish goals., • Teamwork - Balances team and individual responsibilities, exhibits objectivity and openness to others' views, gives and welcomes feedback, contributes to building a positive team spirit, and puts success of team above own interests., • Work Quality - Demonstrates accuracy and thoroughness, displays commitment to excellence, looks for ways to improve and promote quality, applies feedback to improve performance, and monitors own work to ensure quality., • Job Knowledge - Competent in required job skills and knowledge, exhibits ability to learn and apply new skills, keeps abreast of current developments, requires minimal supervision, displays understanding of how job relates to others, and uses resources effectively. US Citizen Required - this position is located at a facility that requires special access. Required Knowledge, Skills & Abilities • Ability to build effective working relationships, persuade and influence, and problem-solve complex issues., • Ability to work with machinery, using technical skills., • Ability to read, write analyze, and interpret technical specifications, journals, and legal documents., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Ability to clearly analyze customers' needs and then steer and persuade them into win-win outcomes for the customer and Greenpoint Technologies., • Strong communication, relationship, time-management, and problem-solving skills., • Strong sense of ethics, character, and interpersonal skills., • Must stay knowledgeable in the industry and up to date with technical trends as well as competitors and the marketplace., • Ability to mentor, motivate and pass on key technical skills to other relevant members of the manufacturing Engineering department staff and the organization., • Ability to read blueprints., • Ability to organize complex projects and related drawing packages., • Ability to easily grasp complex documented procedures., • Proficient with computers including data entry and MS Office (Word, Excel)., • Knowledge of aerospace record keeping, and related quality standards required., • Ability to maintain high quality standards and work within a schedule driven environment., • Knowledge of manufacturing fabrication methods and techniques., • Knowledge of tooling and precision instruments., • Skilled in applying dec-lam, leather, rubber trim and aluminum trims, etc., • Knowledge working with Nomex and Aluminum panels., • Ability to sit for extended periods of time, use hands to lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds and have close/color vision ability to adjust focus., • Ability to travel as required., • Ability to work outside of core business hours as required. About Greenpoint Technologies Greenpoint delivers nose-to-tail VIP Jet aircraft interiors for private clients and Heads-of-State. We are proud to be known in the aerospace industry for our design and engineering innovation, award-winning company culture, and on-time delivery of our beautiful products. We use leading-edge tools and employee-built processes to deliver extraordinary, one-of-a-kind custom aircraft interiors. It's complex work, but we work smart. In return for hard work, collaboration, and creativity, our people experience a culture custom built for high achievers: • Big jobs and stretch assignments., • High accountability environment, with transparent decisions aligned to values, open communication, and engaged leadership.

Job Description Locations: Hanover, MD; Columbia, MD; Augusta, GA; San Antonio, TX The Swift Group is a privately held, mission-driven and employee-focused services and solutions company headquartered in Reston, VA. Our capabilities include Software Development, Engineering & IT, Data Science, Cyber Enablement, Logistics, and Training. Founded in 2019, Swift supports Civilian, Defense, and Intelligence Community customers across the country and around the globe. We are looking for a DevOps Engineer to join our high-performing team on a dynamic program. In this role, the DevOps Engineer will work hands-on with cloud infrastructure, containerized platforms, and automation frameworks to enable scalable, secure, and efficient delivery of mission-critical systems. This position requires expertise in Kubernetes, AWS, automation tools and scripting, with the opportunity to support cutting-edge Big Data platforms. You will help architect, deploy, and maintain infrastructure for both cloud and on-premise systems, while championing reliability, repeatability, and performance. Responsibilities: • Design, implement, and maintain cloud-native and hybrid infrastructure solutions in AWS, with a focus on Elastic Kubernetes Service (EKS), • Deploy and manage containerized applications using Kubernetes across development and production environments, • Automate infrastructure provisioning and application deployment using Infrastructure as Code (IaC) tools such as Terraform and Ansible, • Monitor and support Linux-based systems for availability and performance, • Collaborate with development teams to integrate CI/CD pipelines and improve release cycles using tools like Git, Flux, and Jenkins, • Continuously improve processes and tools to ensure high availability and performance, • Support deployment of portable edge-computing infrastructure to non-cloud (on-premise) environments, • Diagnose and resolve system issues across the stack, including networking, containers, and cloud services, • Participate in Agile development activities and contribute to continuous process improvement initiatives, • Bachelor's degree in Computer Science or related field, • Mid-level candidates: 3-8 years of relevant experience, • Senior-level candidates: 9-13 years of relevant experience, • SME-level candidates: 14+ years of relevant experience, • Hands-on experience with AWS services such as EKS, EC2, EBS, S3, Lambda, • Proficient in Linux systems administration and troubleshooting, • Proficient in scripting/programming abilities in Python, Bash, or Go, • Knowledge of containerization technologies (Docker) and orchestration platforms (Kubernetes), • Experience with Terraform, Ansible, and other IaC or configuration management tools, • Familiarity with Git, Flux, and other development and deployment tools, • Demonstrated ability to work in Agile environments and use tools such as JIRA and Confluence, • Must be able to obtain Security+ certification within 60 days of hire, • Must be available to work on-site 4-5 days per week; flexibility is required to align with customer needs, • Experience with big data technologies like: Hadoop, Accumulo, Ceph, Spark, NiFi, Kafka, PostgreSQL, ElasticSearch, Hive, Drill, Impala, Trino, Presto, etc., • Work could possibly require some on-call work. #LI-DI1 #Onsite The Swift Group and Subsidiaries are an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class. Pay Range: $49,996.80 - $290,004.00 Pay ranges are a general guideline and not intended as a guaranteed and/or implied final compensation or salary for this job opening. Determination of official compensation or salary relies on several different factors including, but not limited to: level of position, complexity of job responsibilities, geographic location, work experience, education, certifications, Federal Government contract labor categories, and contract wage rates. At The Swift Group and Subsidiaries, you will receive comprehensive benefits including but not limited to: healthcare, wellness, financial, retirement, education, and time off benefits.

Job DescriptionAt Wyetech, you’ll be at the center of an award-winning corporate culture, breaking technological barriers and solving real-world problems for our federal government customers. We are committed to hiring the best of the best, and in return, we offer a world-class, truly unique employee experience that is rare within our industry. We are seeking a highly motivated and experienced DevOps Engineer to join our fast-paced development team. The ideal candidate will have strong working knowledge in Linux systems administration, and a background in Big Data solutions, configuration management, automation, scripting, and AWS. The DevOps Engineer will be responsible for implementing infrastructure, automating deployment processes, and ensuring the reliability and scalability of our services. Work is performed on a San Antonio, TX customer site 5 days/week some weeks and some weeks it will be hybrid with the ability to be working from home. This will change as needed, so flexibility is key. If you have a passion for DevOps and are interested in working with a dynamic and innovative team, we encourage you to apply for this exciting opportunity. #Mid-Senior Level Due to federal contract requirements, United States Citizenship and position appropriate security clearance is required. (e.g. Active TS/SCI security clearance with agency appropriate polygraph).Capabilities • Support development and deployment of cloud infrastructure in AWS, • Automate deployment processes and ensure reliability and scalability of services, • Manage and maintain Kubernetes containers and cloud infrastructure on AWS, • Collaborate with development teams to integrate their applications into the infrastructure, • Monitor and troubleshoot production systems and resolve issues as necessary, • Continuously improve processes and tools to ensure high availability and performance, • Stay current with new technologies and industry trends, continuously exploring new ways to improve our infrastructure, • Other duties as assignedRequired Qualifications, • Security Clearance - A current TS/SCI U.S. Government Security clearance is required; U.S. citizenship required., • 5+ years of experience in DevOps Engineering or Software Development (Java preferred) and Bachelors in related field; or 3 years relevant experience with Masters in related field; or High School Diploma or equivalent and 9 years relevant experience., • Must be able to obtain Security+ certification within 60 days of hire., • Must be able to work daily on customer site in San Antonio, TX. Will work some days from home in a hybrid schedule as well. Flexibility is key to accommodate any schedules changes per the customer and team in place.Required Technical Skills, • Strong Knowledge of AWS services (EKS, EC2, EBS, S3, Lambda) and their application to deployment and management of infrastructure., • Proficient knowledge of Linux, including system administration and troubleshooting., • Proficient in configuration management tools such as Terraform and Ansible, • Experience with application, container, and OS deployment, scaling, and management., • Ability to develop in multiple programming languages such as Python, Bash, or Go., • Familiarity with Git, Flux, and other development and deployment tools., • Excellent problem-solving skills and the ability to identify and troubleshoot complex issues, • Excellent oral and written communication skills., • Understanding of AGILE software development methodologies and use of standard software development tool suitesDesired Technical Skills, • Security+ certification is highly desired., • Experience with big data technologies like: Hadoop, Accumulo, Ceph, Spark, NiFi, Kafka, PostgreSQL, ElasticSearch, Hive, Drill, Impala, Trino, Presto, etc., • Experience with containers, EKS, Diode, CI/CD, and Terraform are a plus., • Work could possibly require some on-call work. The Benefits Package, • A Choice of Medical Plan Options, some with Health Savings Account (HSA), • Vision and Dental, • Life and AD&D Benefits, • Short and Long-Term Disability, • Hospital Indemnity, Accident, and Critical Illness Insurances, • Optional Identity Theft and Legal Protection ServicesCompany Environment & Perks, • Employee Referral Bonus Eligibility up to $10,000, • Mobility Among Wyetech-supported Contracts, • Various contract and work locations throughout Maryland, Virginia, Colorado, Texas, Utah, Alaska, Hawaii and OCONUS, • Various team-building events throughout the year such as: monthly lunches, summer company picnic, and an annual holiday party.

Entity: Gas & Low Carbon Energy Job Family Group: Operations Group Job Description: About Archaea bp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition. Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline. About the role Located in Houston, TX, Conifer Systems has been in business for over 15 years and is seeing unprecedented growth. We contribute to our success to our long-term employees, and an environment that promotes teamwork, collaboration, and professional development. A Solutions Engineering Manager is responsible for developing the solutions for customers’ pollution control needs based on project specific requirements. Solutions are identified by studying the application and applying knowledge of general chemical & mechanical engineering concepts to develop the most optimized equipment design for the application. Key accountabilities • Works on the development of abatement solutions and holds responsibility for the engineering and design integrity., • Responsible for the development of new process calculation methods as needed to provide accurate theoretical models of system performance, efficiency, energy consumption, cost, etc., • Develops and optimizes tools and methods that increase efficiency in generating Application Solutions., • Develop sizing tools used to prescribe abatement solutions., • Evaluates current and emerging technologies to understand how they may be applied to future systems., • Works on R&D effort sustaining and optimizing existing equipment designs as well as new product development., • Creates applications notes, technical notes and calculation summaries that demonstrate product capabilities., • Provides technical support and guidance to the sales, manufacturing, and field service teams and customers as needed., • Develop detailed equipment specifications on not only the entire system but individual components as needed., • Creates equipment proposals including technical descriptions, preliminary drawings, and assists with cost estimates as required., • Occasional travel to customer sites as needed to support sales and field service. Essential Education • Bachelor of Science’s degree or foreign equivalent in mechanical and/or chemical engineering Essential Experience • 5-10 years of experience, • Experience with AutoCAD 2D drafting software is required., • Experience with creating calculation programs in Microsoft Excel or other similar software., • Understanding of the working principles of the following typical air pollution control technologies:, • Regenerative Thermal Oxidizer (RTO), • Direct Fire Thermal Oxidizer (DFTO), • Thermal Recuperative Oxidizer (TRO), • Catalytic Oxidation, • Wet Scrubbing, • Dry Scrubbing, • Venturi Scrubbers, • Electrostatic Precipitators, • Filtration Systems, • Absorption Systems Why join us? Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today! How much do we pay? $95,000 - $135,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at ___. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at ___. Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: • Discretionary Annual Bonus Program, • 401K Program, • Quarterly Momentum Bonus, • Health, Vision, And Dental Insurance, • Life Insurance, • Short-Term Disability, • Long-Term Disability But above all? You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today! Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is a hybrid of office/remote working Skills: Maintenance Planning, Maintenance Scheduling, Operations readiness planning, Operations turnaround coordinating, Operations Turnaround Preparation, Site operating procedure development, Turnaround common process, Turnaround Planning, Turnaround pre-start-up assurance, Turnaround Scheduling, Turnaround scoping, Work Packaging Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please ___. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Are you excited about applying your full stack engineering skills to build Digital Experiences for customers that participate in Equity Compensation plans? Fidelity's Workplace Solutions (WS) Digital Platforms Technology team is looking for a Director, Software Engineer to craft, build, test, and deliver the features that make up Fidelity’s digital experiences. You will also provide guidance and mentor developers within the wider Digital Platforms Technology team. Strategy & Planning: * Defines and executes on tech vision in consultation with architecture, engineering and product leadership. * Brings tech vision to life; emphasizes platform stability, engineering discipline, and builds a plan to address end-of-life technologies. * Facilitates the alignment of the product roadmap with tech driven initiatives. Coaching & Mentoring: * Mentors agile teams including developers, testers and analysts. Acts as a link between product and architecture. * Creates next-gen tech leads by investing significant efforts in coaching and mentoring associates. * Serves as the authority on technical solutions and standards. Hands-on Engineering: * Acquires expertise in Fidelity-specific practices while staying engaged on emerging industry standards. Shapes engineering guidelines, ensuring they remain up-to-date with the latest industry trends. * Works on strategic projects that span multiple business units and product teams. Provides technical mentorship and leadership, including hands-on development, especially where new coding patterns are introduced. * Acts as the steward of tech vision, delivers on complex projects with a focus on incremental value delivery to achieve the tech vision. Scope: * Provides technical leadership to multiple agile teams. * Works across business units to develop an engaged engineering community. Maintains focus on strong engineering discipline. * Serves as a developer advocate. Brings developer experience concerns to the fore and helps improve developer experience. * Serves as an escalation point for production issues. * At least 10 years of hands-on coding experience. * Expertise in front-end programming languages and frameworks such as , along with expertise in back-end frameworks like . * Strong problem-solving ability. * Ability to quickly get up to speed, assess viability of solutions and * Deep expertise in <1 or 2 specific languages / frameworks> with solid abilities to enable value delivery in other areas including . Fidelity's Workplace Solutions (WS) Digital Platforms Technology team designs, develops, implements, and supports WS’s suite of Digital products and services. The Digital Platforms development team focuses on delivering innovative solutions that meet the needs of our customers. Our systems professionals thrive, with a steadfast dedication to innovation, which champions a culture of continuous improvement and significant achievement. We see ourselves as a vital link to Fidelity's customers. This is a fast-paced group that is using ground-breaking technologies to build powerful tools and outstanding user experiences for our customers. Information Technology Most roles at Fidelity are Hybrid, requiring associates to work onsite every other week (all business days, M-F) in a Fidelity office. This does not apply to Remote or fully Onsite roles. Please be advised that Fidelity’s business is governed by the provisions of the Securities Exchange Act of 1934, the Investment Advisers Act of 1940, the Investment Company Act of 1940, ERISA, numerous state laws governing securities, investment and retirement-related financial activities and the rules and regulations of numerous self-regulatory organizations, including FINRA, among others. Those laws and regulations may restrict Fidelity from hiring and/or associating with individuals with certain Criminal Histories.

Job DescriptionIndustrial Engineer - Great Pay & Benefits - Excellent work culture - Bonus Eligible This Jobot Job is hosted by: Dallas Gillespie Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $70,000 - $120,000 per year A bit about us: Incredible company with outstanding benefits! We are a company that shows we care for our employees. Why join us? Incredible Benefits: Medical, Dental, Vision and more! Company-paid disability and life insurance FSA HSA 401K with generous contributions Performance incentives And MUCH, MUCH More! Job Details Job Details: We are seeking an experienced and dynamic Permanent Industrial Engineer to join our fast-paced and innovative Engineering team. The ideal candidate will have a strong background in industrial engineering, with a focus on improving efficiency and reducing waste within our operations. This is an exciting opportunity to apply and develop your skills in a challenging and varied role. Responsibilities: As a Permanent Industrial Engineer, you will be responsible for the following: 1. Analyzing and evaluating existing systems and processes to identify areas for improvement and implement efficient solutions., 2. Collaborating with various teams to design, develop, and implement new processes and systems to increase productivity and reduce costs., 3. Providing technical support and guidance to other team members, including training and mentoring junior engineers., 4. Developing and delivering clear and effective presentations to both technical and non-technical audiences., 5. Conducting research to stay up-to-date with the latest industry trends and technologies., 6. Monitoring and reporting on the effectiveness of implemented solutions, making adjustments as necessary., 7. Ensuring all activities and operations comply with regulatory requirements and industry best practices. Qualifications: The successful candidate will have the following qualifications: 1. A Bachelor’s degree in Industrial Engineering or a related field. A Master’s degree is preferred., 2. A minimum of 5 years of experience in industrial engineering, preferably in the Engineering industry., 3. Proven experience in designing and implementing efficient industrial systems and processes., 4. Strong analytical and problem-solving skills, with the ability to think creatively and develop innovative solutions., 5. Excellent presentation skills, with the ability to clearly communicate complex technical information to a variety of audiences., 6. Strong project management skills, with the ability to manage multiple projects simultaneously and meet tight deadlines., 7. Proficiency in using industrial engineering software and tools., 8. Knowledge of relevant regulatory requirements and industry best practices., 9. Excellent interpersonal and communication skills, with the ability to work effectively in a team and build strong relationships with colleagues and stakeholders. This is an exciting opportunity to join a dynamic and innovative team, where you will have the chance to make a real impact on our operations and contribute to our ongoing success. If you have the necessary skills and experience, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Job Description VirtuCrypt is seeking a Senior Kubernetes Platform Engineer to design, operate, and scale our global Kubernetes infrastructure. Our clusters span multiple datacenters and deployment stages (development, QA, staging, and production), with production systems operating in FIPS and PCI-validated environments. Responsibilities • Manage and automate RKE2-based Kubernetes clusters with Rancher., • Implement and maintain infrastructure as code using Terraform and Ansible., • Troubleshoot and resolve complex networking, routing, VLAN, VIP, and firewall issues., • Integrate Kubernetes clusters with the observability stack (Prometheus, Grafana, Alertmanager, Loki)., • Ensure production environments meet strict security and compliance standards., • 5 years proven expertise in Kubernetes administration (RKE2/Rancher experience strongly preferred)., • Hands-on experience with Terraform and Ansible for infrastructure automation., • Strong background in networking across complex, multi-datacenter environments., • Familiarity with VMware infrastructure (vSphere/ESXi)., • Experience operating in regulated environments (FIPS, PCI, or similar)., • Excellent problem-solving and troubleshooting skills with a focus on scalability and reliability. Nice-to-Have Skills, • Experience with GitOps tooling (e.g., Argo CD, Flux)., • Familiarity with container security tools (e.g., Falco, Trivy, Aqua)., • Proficiency in scripting languages (Python, Bash, or Go)., • Knowledge of service meshes (e.g., Istio, Linkerd)., • Health, dental, vision, life, and short/long-term disability insurance, • Paid vacation, holidays, and sick leave, • Competitive compensation and opportunities for advancement, • Retirement plan with employer contribution match, • Scenic corporate campus with amenities including a tennis court, jogging trail, and putting green, • Welcoming, family-style corporate culture uniquely suited to fast-paced, entrepreneurial, and motivated individuals

Job DescriptionSalary: Project Engineer MatkinHoover Engineering and Surveying (MHES) is seeking a highly ambitious and experienced Assistant Project Manager to join our fast-growing Georgetown, Texas team.The ideal candidate is talented, results driven, and looking to grow their skills. Job details Job Type: • Boerne, TX 78006 Qualifications Experience: • Civil engineering/land development, 3 years (required), • Passed P.E. Exam Company Bio: MHESis a well-established engineering firm founded in 2002in Boerne, Texas. MHESprovides civil engineering design, land surveying anddevelopmentservices for commercial, residential,andgovernmentaldevelopments.From its conception, Matkin Hoovers entrepreneurial vision has been to provide quality engineering and surveying services to clients with the personal involvement of a small business. Today, MHES has developed and grown into a full service, professional civil engineering & surveying firmsupported by a strong force of experienced and dedicated licensed professional engineers, engineers-in-training, surveyors, CAD technicians, and administrative staffserving clients globally. Typical Responsibilities: A successful candidate will work harmoniously within a team on residential, commercial, and/or federal land development projects. The responsibilities will include both design and management of the project and team staff. You will assist the Project Manager with design team oversight, organize weekly team status meetings, report project status to Project Manager among other responsibilities. The position will take project ownership for selected projects as determined by the project manager and ensure the project meetsand exceed client expectations by ensuring accurate, complete, and timely communication and work product. Qualifications • Bachelor of Science in civil engineering (required), • 3years of progressive experience in civil engineering design including: water andwastewaterinfrastructure, roadway design for City and County projects, civil site design, and drainage., • Ability to organize a team to coordinate assignments., • Familiarity with local county and municipal design requirements and permitting., • Ability to focus on the details of a project while understanding the big picture from the project team perspective., • Ability to work on multiple projects concurrently while maintaining strong attention to detail with limited supervision., • Proficiency with Hydrologic & Hydraulic modeling software such as: HEC-HMS, HEC-RAS, HY-8, etc., • Proficiency in Technical writing applied to reports, correspondence, proposals, etc., • Efficiently utilize time in executing assigned tasks accurately, on schedule, and within budget., • Proficiency with AutoCAD Civil 3D(preferred)., • Familiarity with TxDOT design requirements(preferred)., • Effectively interact with clients, vendors, and staff at all levels., • Excellent communication, organization, and customer service are essential. Schedule Expectations: Full Time • 40+ hour work week or as required, • Monday-Friday Benefits: • Salary commensurate with experience, • Quarterly Bonus Potential, • Medical/Dental/Vision/Life/DisabilityInsurance Program, • 401K Retirement Plan, with company contribution, • Paid Holidays, • Paid Time Off Companys website:

Job Description Position Summary The Water Engineering Capital Project Manager is responsible for working closely with the Chief Engineer of Water Systems, Assistant Manager, Senior Engineers, Engineers in Training, Graduate Engineers, contractors, and other stakeholders to deliver water and wastewater capital projects on time and within budget and scope. Essential Duties & Responsibilities PROJECT MANAGER RESPONSIBILITIES • Coordinate internal resources and external resources to facilitate the complete execution of a number of complex water and sewer capital improvement projects., • Ensure projects are delivered on time, within scope, and within budget., • Develop project scopes and objectives, involving all relevant stakeholders and ensuring technical feasibility., • Ensure resource availability and allocation., • Develop a detailed project plan to track progress., • Use appropriate verification techniques to manage changes in project scope, schedule and costs., • Measure project performance using appropriate systems, tools and techniques., • Report regularly, or as requested, and escalate issues, as needed, to Chief Engineer of Water Systems., • Establish and maintain effective working relationships with internal and external customers, consultants, contractors, inspectors and all other stakeholders., • Establish and maintain effective working relationships with the City of New Braunfels, TxDOT, Union Pacific Railroad, the Texas Commission on Environmental Quality, Texas Historical Commission, and all other regulating authorities., • Perform risk management assessments to quantify project risks., • Create and maintain comprehensive project documentation., • Negotiate terms of agreements, draft contracts, and obtain permits and licenses. -Ensure the use of proper design and construction standards and techniques consistent with NBU Policy by plan review and construction site visits. • Analyze operations or processes, design, and/or construction practices., • Provide recommendations to management on construction and improvements., • Conduct analysis and create data and performance metrics., • Provide guidance to management on project direction., • Mentor and provide direction, training, education and support to team members., • Research and interpret regulations, codes and standards to minimize regulatory exposure and liability. GENERAL RESPONSIBILITIES • Exercise sounds problem solving and judgment., • Possess and utilize technical skills capable of analyzing numerous choices and alternatives, and determining the best overall solution (i.e., know and do the right thing), • Explore creative and innovate ways of performing tasks and solving problems, • Gather and assimilate complex technical information on NBU’s water and wastewater systems and assemble into concise professional reports, drawings, and presentations which illustrate any necessary changes to the current infrastructure., • Maintain regular attendance; leave schedule should be managed so as to not interfere with ability to accomplish tasks, including special projects and assignments with deadlines., • Adhere to NBU safety guidelines and practices at all times and in all situations., • Maintain a clean and safe work area, office, field site and vehicle as applicable., • Develop & maintain effective customer service skills for communications with co-workers, customers and the public in general., • Maintain strict confidentiality of business, employee and customer information in written and oral communications and safeguard sensitive documents., • Adhere to NBU policies and procedures., • Exemplify NBU Core Values., • Show initiative and take ownership of work, do what is needed without being asked, follows through, • Establish priorities and multi-task so that assigned duties are completed under pressures of time constraints and deadlines., • Adapt and respond well to change; manage pressure effectively and cope with setbacks and changes in priorities., • Demonstrate effective oral and written communication skills with peers, employees, superiors, and appropriate entities., • Deal effectively with matters of a highly visible and confidential nature when applicable, • Ensure conversations are kept on matters related to NBU business so as to maximize efficiency and productivity., • Provide good judgment and clear analytical thinking to complex problems/issues; apply expertise effectively., • Seek opportunities for self-development and career advancement., • Maintain a helpful and pleasant relationship to internal and external customers., • Supports others and shows respect and positive regard for them; works effectively with individuals, groups, and customers via positive interpersonal skills., • Focus on customer satisfaction and delivers a quality service or product to the agreed standards, • Resolve conflicts by applying expert knowledge of customer or employee situations to identify disparities and recommend sound solutions., • Maintain helpful, respectful, approachable and team-oriented relationships and a positive work environment., • Be receptive to feedback and be willing to learn., • Exemplifies NBU Core Values of Integrity, Stewardship, Team and Safety Formal Education and Work Experience Requirements Degree/Diploma Obtained: Bachelors Work Experience Time Frame: Five Years or More Field of Study: Engineering/Management Certification and Licensures Requirements Project Management Professional certification is a plus. Other Minimum Qualifications Bachelor's degree (preferred) in a related field such as Engineering, Construction Management, Management, Architecture, and/or five years’ experience directly related to construction, project management, and contract negotiations. A valid Texas Driver’s License is required to operate a company vehicle when necessary. Flexibility in available hours, including holidays, weekends, and/or after hours.

Job Description Futurex is seeking talented individuals for the position of Software Development Engineer in Test (SDET). This position is on-site at Futurex’s Engineering Campus in Bulverde, 15 miles north of San Antonio, Texas. This position offers an opportunity for passionate, motivated, and driven individuals to join our team of world-class engineers and assist in quality assurance for Futurex's line of innovative, hardware-based cryptographic solutions In the SDET role, your responsibilities will center on software development and testing. You will ensure the robustness of the company’s automation initiatives before they can be distributed to internal and external clients. You will carry out functional integration testing between the company’s applications, products, and services. Success in this role will be determined by your ability to successfully perform end-to-end testing of automation processes. Job Responsibilities and Duties: • Assess and understand the flow of code and its interaction with various processes, • Document processes and client demands for process improvement, • Log, manage, and track user issues and cases, • Develop new and extend current testing frameworks, • Perform some manual regression testing, • Troubleshoot bugs and other issues on desktop and web-based platforms Job Requirements • Bachelor’s degree in Computer Science, Computer Engineering, or related field, • Excellent written and verbal communication skills, • Ability to identify risks and errors in applications, • Python proficiency, • SQL proficiency, • Selenium experience, • Rest API, • Linux/Bash experience, • Jenkins experience, • Docker experience, • Jenkins, Gitlab and/or other CI pipeline experience, • Java Script experience, • C++ experience, • Knowledge of Micro Service architecture and testing, • Kubernetes, • MitMproxy experience, • Health, dental, vision, life, and short/long-term disability insurance, • Paid vacation, holidays, and sick leave, • Competitive compensation and opportunities for advancement, • Retirement plan with employer contribution match, • Scenic corporate campus with amenities including a tennis court, jogging trail, and putting green, • Welcoming culture, suited to entrepreneurial, and motivated individuals, • Voted as one of the best places to work in San Antonio, 9 years running