Trabajos forklift en Saint Paul, MinnesotaCrear alertas

Job Overview: The Project Builder role is collaborative across the Brand Experience Team and works with the Channel, Go-to-Market, Product, and Sales teams, along with our Dealer partners, to support in-market product experience needs. The primary function of the role is to promote the end-to-end display process(es), from building and maintaining displays, to supporting associated order and inventory management, and facilitating transportation and set up/tear down logistics. This role supports varied product experience projects, across multiple activations, including events and trade shows, dealer showrooms – and both temporary and permanent installations – often with aggressive deadlines. Success in this role requires a broad skill set, including superior technical/hand skills, ability to read plans and take offs and translate them into built items, along with superior organizational and communication skills across teams and platforms. This job is located in Warroad, MN. If you need to relocate for this role, Marvin has a variety of benefit offerings to support your move. Highlights of your role: • Responsible for performing the safe operation of equipment per operating procedures; must handle all tooling with care, • Must comply with all safety requirements, including manufacturing practices and procedures, standard operating procedures, and manufacturing documentation, • Work in a fast-paced environment with short-change over times to complete multiple profile work orders per shift, • Perform quality inspections according to established guidelines to ensure parts conform to necessary specifications, • Complete necessary ICIM transactions, • Conduct/support cycle counts and annual inventory review; make recommendations for needed updates/maintenance, • Prep and repair show units for in-market activations, • Installation of updated parts for traveling displays, • Ability to work independently, within the Build group, and across teams to complete work orders, • Maintain accurate records of materials use and labor hours for each project, • Steward/support transportation and on-site logistical planning, ensuring all displays are packed properly, arrive safely and on-time (and with any needed special handling equipment), and partner with onsite vendors for any necessary labor and material handling needs You're a good fit if you have (or if you can):, • Proactively identify and react to shifting priorities and project changes/adjustments as needed, • Ability to analyze and resolve complex scenarios, • Detail-oriented, • Drive for results, • Teamwork, • Technical proficiencies, including product knowledge, carpentry/construction skills, and the ability to read schematics and takeoffs Also want to make sure you have:, • Physical demands of the job include:, • Ability to frequently stand for long periods of time, up to 8 hours per day, • Ability to walk long distances in an industrial setting, • Range of motion to include reaching for items in bins and on shelves and bending with the their knees for proper lifting technique, • Ability to lift 50 lbs, • Excellent communication skills, across platforms and with internal and external partners, • Ability to obtain a Hyster license (forklift operator), • Travel for setup/tear down and installation of in-market product experience activations Schedule: Monday - Friday, 7:00am - 3:30pm We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities, • Brighter Days Fund – financial support from your colleagues and the Marvin family during personal hardships Join the more than 8,000 Marvin team members to experience these benefits and more. Apply today! Marvin is an Equal Opportunity Employer: This job posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities of the employee. Accommodation may be made to enable an individual with a disability to perform the essential functions of the position. Any employment offer depends on completing a background check and drug screen to company standards. Compensation: $19.00 - $25.50 per hour

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Liquor - Sun Ray Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Liquor - Sun Ray Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Warehouse Technician (Forklift Operator) - 3rd shift.We are currently hiring for a Warehouse Technician on 3rd shift for our warehouse team.To meet operational needs, mandatory biweekly Saturday overtime will be part of our standard schedule.Do you want to work for a company that is committed to gro

Join a team where your voice matters and your ideas drive impact. Our Company DNA is rooted in character, customer-centric thinking, accountability, and a mindset that’s always asking “why?” to keep moving forward. We are seeking a hands-on Second Shift Lead to work alongside the team while helping coordinate daily operations. This role is ideal for someone who leads by actively operating equipment, supporting production, and keeping the shift running smoothly while ensuring safety, quality, and efficiency standards are met. Key Responsibilities Hands-On Production Support • Actively operate forklifts and other equipment throughout the shift, • Work side-by-side with team members to meet production goals, • Step in where needed to keep workflow moving efficiently Team Guidance (On-the-Floor Leadership) • Provide real-time direction, support, and coaching to team members, • Help train new employees and reinforce proper procedures, • Serve as the go-to resource for questions and problem-solving during the shift Workflow Coordination • Help execute daily production schedules and adjust priorities as needed, • Identify bottlenecks and quickly resolve issues to minimize downtime, • Ensure materials, equipment, and staffing are aligned with production needs Safety & Compliance • Lead by example in following all safety policies and procedures, • Ensure forklift inspections, safe operation, and housekeeping standards are consistently maintained, • Address safety concerns immediately and communicate issues to management Equipment & Work Area Management • Ensure forklifts and equipment are properly used, inspected, and maintained, • Maintain clean, organized, and safe work areas, including proper stacking and storage Documentation & Communication • Assist with completing shift reports, production tracking, and required paperwork, • Communicate shift updates, challenges, and priorities to supervisors and the next shift Continuous Improvement • Suggest practical improvements to increase efficiency, quality, and workflow, • Support implementation of process changes on the floor Additional Duties • Perform other tasks as assigned by management Qualifications • Experience in a warehouse, manufacturing, or production environment, • Strong forklift operation skills, • Previous lead or informal leadership experience preferred, • Ability to work hands-on while guiding a team, • Strong problem-solving and communication skills, • Commitment to safety, quality, and teamwork Why Join Us? • Competitive pay and benefits, • Team-oriented, fast-paced environment, • A role where you can make a direct impact every day Pay Range • $24-$28 per hour Benefits • Healthcare, • Dental, • Vision, • 401(k) with company match

Job Title: Route Driver (Box Truck) - Experienced Company/Location: Nico Products / Minneapolis MN Shift: 6:30am - 2:30pm M-F + OT as needed Pay: $29 - $33 / hour + DOQ Signing Bonus: $1500 (Employment/staffing agencies - please do not reach out about this ad. We only hire direct.) Attendance matters: This role directly impacts customer delivery schedules. We depend on you being here every scheduled day, on time, and ready to work. Strict security protocols: Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas). Unless device is supplied by the company. Warehouse environment: Although this is a driving role, you will work in a warehouse/manufacturing setting with exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations. We conduct in-person interviews only: This position is on-site only and located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad. About this Role Drive box truck to/from customers to deliver/pick up parts. This role represents our company well to our customers. Performs in-plant operations utilizing forklift such as loading and unloading trucks, moving raw and finished product to and from production areas, and places items in designated areas in the warehouse. Key Responsibilities • Class B License with DMV health card, • Follow DOT regulations, • Clean driving record, • Strong directional sense or working knowledge of the local area highway system, • Customer service type attitude representing the company to our customers, • High school diploma or GED (preferred), • 1 year shipping and receiving experience, • Forklift certification a plus, • Good organizational skills and the ability to follow multiple tasks simultaneously, • Strong verbal and written communication skills. This is a customer service position, • Ability to maintain a regular and reliable attendance record, • Consistent legible writing skills, • Basic typing and computer skills helpful, • Fluency in reading, writing, speaking, and understanding the English language, • Ability to lift and move 1-50 lbs as needed, • Ability to interact with customers, co-workers and supervisors in a cooperative manner, • Ability to work independently with little or no supervision Duties and Responsibilities • Maintain daily inspection log for company truck., • Make sure necessary repairs and preventative maintenance are promptly scheduled., • Provide feedback on route efficiency, and any customer issues or complaints., • Ensure that POD is secured and returned to plant on all delivered products., • Represent the organization in a courteous, professional, and presentable manner at all times. This position has a high degree of customer contact., • Assist in shipping and receiving department when not on the truck., • May Pick up unfinished work at our customers and/or deliver finished work to our customers., • Other duties and responsibilities as assigned What We Offer (Perks & Benefits)We invest in people who invest in their work. • Competitive Pay and Signing Bonus, • Work-Life Balance: Generally work a short day on Fridays, • Reviews & Raises: Performance reviews at 60 days, 6 months, then twice a year—raises available if expectations are met, • Bonuses: Quarterly profit-sharing, • Paid Time Off: Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary, • Retirement Support: 401k with company contributions, • Insurance Coverage: Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more!, • Paid Extras: Prescription safety glasses, safety boots, referral bonuses, and more APPLICATION PROCESS: • Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected., • No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview., • If you are selected for an interview, you will be contacted via text/email. (As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.), • Expect a response within 14 days of your application. Communication & Privacy Notice If selected for an interview, you will be contacted via text or email. All information provided will solely be used for the hiring process. We do not sell or share applicant information for marketing purposes. Security: This position operates within a a secure manufacturing facility. All employees must adhere to strict security policies including restrictions on personal electronic devices, access control, and documentation procedures. Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply! Work Authorization / Security Clearance: The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice. For more information on our company, visit: ___ PI20aff983524e-26276-39993833

ESSENTIAL DUTIES AND RESPONSIBILITIES • Lead with a safety mindset that ensures that every US Foods associate remains injury free, always. Champion safety procedures, processes and training to create and maintain a safety-first culture in the warehouse., • Oversee and develop warehouse associates through one-on-one coaching, training on policy and procedures, assisting in problem resolution when required, and leading by example. Discuss associate performance with Sr. Warehouse Managers and create plans to address gaps., • Create a cohesive organization by keeping lines of communication open and directing workforce to ensure efficient workflow., • Direct and supervise the work and productivity of associates within the warehouse department. Drive associate engagement and retention, and create a culture that embodies US Foods values., • Participate in building high-performing teams by interviewing and hiring warehouse personnel, in conjunction with Sr. Warehouse Managers. Review performance, coach on productivity and safety targets, and deliver disciplinary action., • Lead and direct associates to achieve accurate orders that are then staged and loaded on the trucks. Oversee the preparation of the warehouse for shipping or receiving on the next shift., • Monitor operational information, such as "mis-picks" and productivity reports, to ensure the entire shift meets rates and follows preferred methods. Take action through coaching and counseling to correct behaviors., • On day shift, designate dock locations for inbound carriers. Ensure product is stocked in appropriate location in accordance with food safety and FIFO processes & procedures. Monitor replenishment activity to ensure stock is available for the shipping shift and to minimize the potential for “shorts”. Oversee will call., • Maintain physical condition and safety of warehouse and equipment, including preparing work orders for repairs and requisitions for equipment., • Work with operations management team to identify sources of inventory shrink and assist in development of an action plan. Analyze the current operations and make recommendations to improve on expense and cost control., • Regularly inspect facility for safety hazards and either resolve them or report them to the safety manager as appropriate. Maintain the physical condition of the warehouse and its equipment., • Ensure Master Sanitation Schedule (MSS) and FSQA requirements are followed., • Effectively schedule working shifts by leveraging appropriate planning tools (i.e., Microsoft Excel), • Other duties assigned by manager. SUPERVISION: • Direct: Union and/or non-union warehouse on-floor associates (Loaders, Selectors, Receivers, Forklift drivers, etc.) RELATIONSHIPS • Internal: Warehouse leaders and coworkers; Internal customers across departments (e.g., Sales), • External: N/A WORK ENVIRONMENT • The work takes place in normal warehouse environments as well as in cooler and freezer areas where temperatures may be as low as -5 degrees. MINIMUM QUALIFICATIONS Related Experience/Requirements: • Minimum of three years of experience in warehouse distribution required., • Minimum of one year of experience overseeing a workforce required. Knowledge/Skills/Abilities: • Broad knowledge of warehouse operations, methods and procedures., • Strong leadership, communication and people development skills., • Familiarity with inventory control, OSHA, HACCP and other regulatory requirements., • Ability to interpret financial and operational data., • Basic computer skills (i.e., Microsoft Office). Travel: -10% travel required, typically for mandatory meetings and/or training. Education/Training: • High school diploma or GED required; college degree preferred. PREFERRED QUALIFICATIONS Licenses/Certifications: • HACCP certification a plus., • PCQI certification a plus. This role will also receive annual incentive plan bonus up to 10% of base salary. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: ___. PHYSICAL QUALIFICATIONS: Must be able to perform the following physical activities for described length of time: OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: OCCASIONALLY WALK: FREQUENTLY DRIVE VEHICLE 1: OCCASIONALLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): OCCASIONALLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): OCCASIONALLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): NEVER CARRY 1-10 lbs (Sedentary): CONTINUOUSLY 11-20 lbs (Light): OCCASIONALLY 21-50 lbs (Medium): OCCASIONALLY 51-100 lbs (Heavy): NEVER Over 100 lbs (Very Heavy): NEVER PUSH/PULL 2: OCCASIONALLY CLIMB/BALANCE 3: OCCASIONALLY STOOP/SQUAT: OCCASIONALLY KNEEL: OCCASIONALLY BEND: OCCASIONALLY REACH ABOVE SHOULDER: OCCASIONALLY TWIST: OCCASIONALLY GRASP OBJECTS 4: OCCASIONALLY MANIPULATE OBJECTS 5: OCCASIONALLY MANUAL DEXTERITY 6: OCCASIONALLY 1 (Drive Vehicle: Forklift, pallet jack) 2 (Push/Pull: Pallet jack controls, doors, product, pallets) 3 (Climb/Balance: On/off pallet jack, stairs) 4 (Grasp Objects: Pens, telephone, computer mouse, paperwork, pallet jack controls, boxes) 5 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 6 (Manual Dexterity: Typing, use of office machines such as copiers, printers) #LI-BR1

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Liquor - Sun Ray Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Liquor - Sun Ray Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

We are the Metropolitan Council, the regional government for the seven-county Twin Cities metropolitan area. We plan 30 years ahead for the future of the metropolitan area and provide regional transportation, wastewater, and housing services. Metro Transit, a division of the Metropolitan Council, is seeking Light Rail Transit Helpers! Metro Transit, a division of the Metropolitan Council, is the largest provider of public transit service in the Minneapolis-St. Paul seven-county metropolitan area and one of the country's largest public transit systems. Metro Transit operates bus, light rail and commuter rail service essential to the region's mobility, and provides resources for carpooling, vanpooling and bike commuting. Metro Transit helps people get where they're going, helps reduce the region's motor vehicle congestion problem and promotes a cleaner environment. How your work would contribute to our organization and the Twin Cities region: The Light Rail Transit (LRT) Helper meets the train operators, performs safety inspections, and performs cleaning and removal of graffiti and biohazard substances/materials. This position also removes vehicle protection film and replaces seats for light rail vehicles. Work shifts for new hires are typically third (3rd) shift. Hourly Pay Range: For candidates newly hired into the Amalgamated Transit Union (ATU) contract, starting wage is set by the ATU contract. Internal hires will follow Metropolitan Council's union wage guidelines. Hire: $24.63 hourly After year one: $28.15 (based on ATU salary rates starting 8/1/2025) After year two: $31.67 (Subject to contract change, based on ATU salary rates starting 8/1/2025) After year three: $35.19 (Subject to contract change, based on ATU salary rates starting 8/1/2025) *Shift differential of five percent (5%) for all hours worked in a shift scheduled to end between 8:00 PM and 11:59 PM, and seven percent (7%) for all hours worked in a shift scheduled to end between 12:00 AM and 7:00 AM and/or scheduled to start between the hours of 10:00 PM and 3:00 AM We are committed to supporting a diverse workforce that reflects the communities we serve. *This recruitment will establish a six (6) month Eligibility List for current and future vacancies. • Cleans and pressure-washes light rail vehicle parts (e.g., bogies, couplers, EHUs) using equipment like automatic washers and hot tanks., • Operates tools and machinery (e.g., pallet jack, forklift, electric carts, hoists, power scrubbers/sweepers)., • Performs interior and exterior cleaning of vehicles, including graffiti and biohazard removal., • Operates light rail vehicles within designated areas and manages vehicle washing, sand reservoir filling, and washer fluid refilling., • Inputs vehicle mileage into the computer system., • Completes required safety training (e.g., CPR, AED, Lockout/Tagout, Blue Flag Protection) and performs related procedures., • Helps support cab bonnet cleaning, light fixture cleaning, and trash disposal in shop areas., • Sweeps, mops, and scrubs shop and storage areas; transfers used oil to waste drums; and maintains bulk hardware bins., • Helps with parts ordering, gathering, and delivery., • Conducts light rail vehicle services (e.g., seat replacement, decal/vandal guard work)., • Helps support other maintenance duties except vehicle inspections, repairs, or diagnostics., • Performs other duties as assigned. Education/Experience: • High School diploma/GED or higher AND one (1) year of full-time cleaning work experience Desired Qualifications:, • Previous experience cleaning the interior and exterior of large passenger vehicles or trains is desired with the past 10 years., • Previous experience working with biohazard substance/materials such as bodily-fluid, urine, blood, vomit, etc., • Previous experience cleaning working with industrial cleaning supplies., • Experience with basic maintenance/mechanical or repair., • Experience and ability to effectively work independently and in a diverse team environment., • Demonstrated ability to maintain a high-performance level of dependability, reliability, and safety. License Requirements:, • Valid driver's license with acceptable driving record. Knowledge, Skills, and Abilities:, • Must be able to read, write, and communicate in English., • Ability to lift up to fifty (50) pounds., • Ability to pass physical examinations, Rail Operations Rule Book, and physical agility examinations., • Ability to obtain and maintain Train Operator Certification for Maintenance Personnel., • Ability to work with a diverse customer group in a positive, professional manner. Union/Grade: ATU/ Grade 22 FLSA Status: Non-Exempt Safety Sensitive: Yes. Subject to random DOT drug tests. Work Environment: Work is performed in a rail yard and garage setting. Exposure to diesel fumes. Must work in extreme warm and cold weather conditions. May work around moderate noise. Hand tools will be required to inspect and clean vehicles. Physical Requirements: May be working in wet, humid conditions (non-weather), work near moving parts or equipment, work in high precarious places, fumes or airborne particles, toxic or caustic chemicals and outdoor weather conditions. Regularly required to stand, walk and reach with hands and arms, use hands to finger, handle or feel, for long periods, sit climb or balance, stoop kneel crouch or crawl occasionally, speak/hear normal conversation and telephone ring tones, operate a computer and other office equipment. May carry up to fifty (50) pounds, lift/carry push/pull up to one hundred (100) pounds with assistance, must have close distance, color, peripheral vision and depth perception and ability to adjust focus. The examples of duties listed in the class specifications are representative but not necessarily exhaustive or descriptive of any one position in this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the position. Regular attendance is an essential responsibility. Please note: ATU Internal applicants who pass their WRE, structured panel interview, and physical agility test will be selected by seniority. Passing ATU internal applicants will be awarded this position over non-ATU/external applicants. Successful applicants hired into the Light Rail Transit Helper role will require a one-year working commitment to the LRV Maintenance area before you will be eligible to bid/transfer to a different department within Metro Transit. What steps the recruitment process involves: • We review your minimum qualifications., • We request and review Work Record Evaluations (WRE) on ATU internals only., • We rate your education and experience., • We conduct a structured panel interview and physical agility test.Once you have successfully completed the steps above, then: If you are new to the Metropolitan Council, you must pass a drug test (safety-sensitive positions only), and a background check which verifies education, employment, and criminal history. A driving record check and/or physical may be conducted if applicable to the job. If you have a criminal conviction, you do not automatically fail. The Metropolitan Council considers felony, gross misdemeanor, and misdemeanor convictions on a case-by-case basis, based on whether they are related to the job and whether the candidate has demonstrated adequate rehabilitation. If you are already an employee of the Metropolitan Council, you must pass a drug test (if moving from a non-safety sensitive position to a safety-sensitive position) and criminal background checks if the job you're applying for is safety-sensitive, is a supervisory or management job, is in the Finance, Information Services, Audit, or Human Resources departments, or has access to financial records, files/databases, cash, vouchers or transit fare cards. A driving record check and/or physical may be conducted if applicable to the position. IMPORTANT: If you make a false statement or withhold information, you may be barred from job consideration. The Metropolitan Council is an Equal Opportunity, Affirmative Action, and veteran-friendly employer. The Council is committed to a workforce that reflects the diversity of the region and strongly encourages persons of color, members of the LGBTQ community, individuals with disabilities, women, and veterans to apply. If you have a disability that requires accommodation during the selection process, please email ___.

Hiring bonus and pay rate increases until you reach the top of the pay range. $4000 Hiring Bonus • $2000 after 30 days of employment, • $2000 after probation completion (6 months) The Metropolitan Council's Metro Transit Division is one of the country's largest transit systems, employs more than 3,000 people, and provides ridership through an integrated network of buses, light rail, and commuter trains, as well as a resource for those who carpool, vanpool, walk, or bike in the Twin Cities. ___ We are committed to supporting a diverse workforce that reflects the communities we serve. Metro Transit is currently seeking Bus and Rail Mechanic Technicians who are dedicated, career-oriented individuals with strong mechanical skills and who want to serve the public. Mechanic Technicians perform, diagnosis, repair, and provide preventive maintenance on Metro Transit's buses, train, cars, trucks, and equipment. They also remanufacture and rebuild components to the manufactures' specifications; fabricates/machines/designs parts as needed and provides welding and painting services. This position is eligible for benefits after 30 days. Go Greener! Leading the transit industry in the reduction of diesel exhaust emissions by utilizing alternative propulsion and fuel technologies. Metro Transit operates clean diesel, diesel/electric hybrid, and battery electric propulsion systems. Advanced Vehicle Technology: Today's modern buses are the most technologically advanced buses ever, equipped with multiplexing, J1939 CAN communications, and electric powered accessories. These advanced technologies require troubleshooting using computer based diagnostic software. Excellent Facilities: Bus and Rail maintenance facilities offer heated climate control and good lighting. Other facility amenities include vehicle ventilation, vehicle lifts and hoists, and fall protection. Comprehensive Training Program: Employees are trained on all facets of bus or rail maintenance processes, procedures, and technologies. • Repair door system and pneumatics system., • Repair HVAC and communication systems., • Repair interior and exteriors of vehicles., • Operate Light Rail Vehicle (LRV), hi-rail, and re-rail equipment., • Operate wheel truing machine, wheel axle press and brake lathe., • Perform schematic and blueprint reading; electrical/electronic chart recording interpretation., • Perform computer data entry to communicate the project status through various mediums., • Attend safety and training meetings; participate in emergency preparedness systems., • Perform electrification/distribution lock out procedure consistent with established safety protocol., • Perform troubleshooting, preventive maintenance and repairs of battery-electric, electric, and internal combustion propulsion systems., • Diagnose, inspect, repair, replace and rebuild electrical, mechanical and hydraulic systems/components., • Perform service calls., • Weld, fabricate, cut metal, wood and other materials., • Clean work areas, buses and equipment using power sweepers and scrubbers, pressure washers, chemicals, soap, and floor dry., • Complete miscellaneous shop work (fuels/cleans/sweeps directs traffic, empties trash, fills windshield wash buckets., • Operate a forklift as required., • Perform other related duties apparent or assigned to this position. Education Experience: Any of the following combinations of experience (in diesel, electro, or other mechanic related field such as transportation equipment or transit vehicles, maintenance and repair of light rail vehicles, buses, semi-trucks, or aircraft within the last ten (10) years) and completed education (degree field of study in diesel, electro, or other mechanic related field such as mechanical transportation equipment or transit related vehicles, maintenance and repair of light rail vehicles, buses, semi-trucks, or aircraft): • High school diploma/GED and two (2) years of work experience., • Associate degree or two (2) year college or vocational school program. Non-citizen applicants (Except for lawful permanent residents), please note: As of December 2, 2025, the MN DVS has temporarily paused the issuing of non-domiciled Commercial Driver's Licenses as required by the U.S. Department of Transportation. Click on this link for more detailed information ___ NOTE: Candidates that hold a Commercial Driver's License your permanent residence must be in Minnesota or Wisconsin. License Requirements for Bus Mechanic Technician: • Valid driver's license with acceptable driving record., • Ability to obtain a Class B Commercial Driver's Permit and License (with combination vehicle, general knowledge, and air brake) within the six-month probation or evaluation period. Employees are required to successfully obtain their written permit within thirty (30) working days of hire at their own cost and time. Metro Transit will then provide the training, testing, and licensing upon successfully passing the road test. You will have two attempts to obtain your CDL through Metro Transit. *For Minnesota residents only. Please note, if you are unable to pass your CDL through Metro Transit, you can attempt to obtain your CDL at your own cost, and on your own time. If you do not possess your Class B CDL by the end of your probation or evaluation period (six months), your employment will be terminated. For current ATU members, you would return to your former position., • Valid driver's license with acceptable driving record., • Ability to obtain a Class B Commercial Driver's Permit and License (with combination vehicle, general knowledge, and air brake) within the six-month probation or evaluation period. Employees are required to successfully obtain their written permit within thirty (30) working days of hire at their own cost and time. Metro Transit will then provide the training, testing, and licensing upon successfully passing the road test. You will have two attempts to obtain your CDL through Metro Transit. Please note, if you are unable to pass your CDL through Metro Transit, you can attempt to obtain your CDL at your own cost, and on your own time. *For Minnesota residents only. If you do not possess your Class B CDL by the end of your probation or evaluation period (six months), your employment will be terminated. For current ATU members, you would return to your former position., • 1 year of full-time professional vehicle troubleshooting and repair experience within the last 10 years., • Experience driving buses, heavy-duty trucks, and other heavy-duty equipment. Knowledge, Skills, and Abilities: • Knowledge of fleet vehicle maintenance, troubleshooting and repair., • Knowledge of AC/DC motors, circuits, drives and controls as well as Programmable Logic Controllers, digital and analog controls and relay logic preferred., • Basic knowledge of AC/DC electrical systems, principles of analog and digital electronics, electronic control circuitry and associated mechanical, HVAC, pneumatic, hydraulic systems, testing and inspections methods/tools, and basic welding skills., • Ability to diagnose electrical, drive ability, and chassis systems issues., • Ability to pass a DOT physical and meet ongoing DOT physical requirements., • Ability to lift up to fifty (50) pounds and one hundred (100) pounds with assistance., • Problem solving and analytical skills., • Ability to learn new technologies., • Ability to analyze malfunctions in the electrical/electronic, mechanical, pneumatic, hydraulic equipment and determine repair and perform electronic fabrication and assembly tasks., • Ability to use electronic tools/computers to diagnose or troubleshoot electrical problems., • Ability to effectively follow troubleshooting guides in all forms (hard copy, computer software, website)., • Ability to use diagnostic computer software and website programs related to diagnosing or troubleshooting electrical problems. Language Skills: • Ability to communicate in English., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to complete work orders and written correspondence. Human Relation Skills: • Promotes an equitable, positive and respectful work environment that values diversity among all employees., • Requires tact, courtesy and cooperation in dealings with others., • Ability to follow direction and follow Metropolitan Council policies. What you can expect from us: • We offer the opportunity to make a difference and positively influence the Twin Cities metropolitan area., • We encourage our employees to develop their skills through on-site training opportunities., • We offer opportunities for career advancement., • We provide a competitive salary, and excellent medical, dental and retirement benefits. Union/Grade: Amalgamated Transit Union (ATU) / Grade73 FLSA Status: Non-Exempt Safety Sensitive: Yes. Subject to random DOT drug tests. Pay and Shifts: All new hires start at $40.70 per hour and all shifts and job information will be governed by ATU seniority and the union agreement. Overnight shifts are eligible for differential pay. This position will require the flexibility to work days, nights, evenings, holidays, and weekends. Hire: $40.70 After year one: $42.96 (based on ATU salary rates starting 8/1/2025) After year two: $45.22 (Subject to contract change, based on ATU salary rates starting 8/1/2025) *A $1,500 initial tool allowance is given upon completion of probation, with $650 annually for ongoing equipment/tool needs. *Shift differential of five percent (5%) for all hours worked in a shift scheduled to end between 8:00 PM and 11:59 PM, and seven percent (7%) for all hours worked in a shift scheduled to end between 12:00 AM and 7:00 AM and/or scheduled to start between the hours of 10:00 PM and 3:00 AM. What your work environment would be. Work is performed in a maintenance garage setting. This position may require working in wet or hot, humid non-weather conditions and in high precarious places up to two thirds of the time. This position may also require, up to one third of the time, working in outdoor weather conditions, extreme cold, risk of electrical shock and work with explosives. What steps the recruitment process involves. You must qualify at each of the numbered steps below to be considered a final candidate for the job. • We review your minimum qualifications., • Must pass a work record evaluation (internal ATU employees only)., • We rate your education and experience. If you are new to the Metropolitan Council, you must pass a physical, drug test and background check which verifies education, employment, driving record, and criminal history. If you have a criminal conviction, you do not automatically fail. The Metropolitan Council considers felony, gross misdemeanor and misdemeanor convictions on a case-by-case basis, based on whether they are related to the job and whether the candidate has demonstrated adequate rehabilitation. If you are already an employee of the Metropolitan Council, you must pass a driving record check, transfer physical, and drug test (if moving from a non-safety sensitive position to a safety sensitive position) and criminal background check if the job you're applying for is safety sensitive, is a supervisory or management job, is in the Finance, Information Services, Audit, or Human Resources departments, or has access to financial records, files/databases, cash, vouchers or transit fare cards. IMPORTANT: if you make a false statement or withhold information, you may be barred from job consideration. The Metropolitan Council is an Equal Opportunity, Affirmative Action, and veteran-friendly employer. The Council is committed to a workforce that reflects the diversity of the region and strongly encourages persons of color, members of the LGBTQ community, individuals with disabilities, women, and veterans to apply. If you have a disability that requires an accommodation during the selection process, please email ___

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Liquor - Sun Ray Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Jerry's Wine and Spirits Reports to: Liquor Store Manager Classification: Part Time Non-Union Rate of Pay: Up to $16.00 Hours: Sunday – Saturday, varied hours GROW with Jerry’s Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Individuals applying for this position should be willing to: • Make lasting connections with our customers, • Ring up customer purchases in an accurate, efficient, and prompt manner, • Problem solve customer questions and/or concerns (may need to call a manager), • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and safe store, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a liquor store, • Knows about wine, beer, and food pairings, • Understands the importance of following all municipal/state/county/location carding laws, • Creates displays, fills the cooler, and stocks shelves with accuracy and enthusiasm, • Store Discount, • Employee Assistance Programs Frequent: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, • forklift, pallet jack, flatbed cart, two-wheeled dolly, carts, box cutter, compactor, scanner, register, check approval machine, coupon machine, telephone Physical OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Location: Cub Foods West St Paul Reports to: Grocery Manager Classification: Part Time Union Rate of Pay: Progressive scale up to $17.25 / hour, based on experience Hours: Sunday – Saturday, varied hours Jerry’s work perks: • Store Discount, • Employee Assistance Programs, • Make lasting connections with our customers, • Fill and rotate cases and displays (may be some heavy lifting-up to 50lbs), • Assist with receiving products and merchandising to keep our shelves full, • Help maintain a clean and sanitary store, • Work with the team on all tasks necessary to have an awesome department, • Is friendly and outgoing and promotes customer service for the entire team, • Has experience working in a grocery position, • Knows about stocking, load cutting, and displaying cases Gain new lifelong skills in customer service Enjoy a Rewarding work environment with a diverse group of coworkers Experience Opportunities for career advancement Maintain a flexible Work schedule Position functions and physical responsibilities may vary by store location. FREQUENT: Physical • lifting/carrying over 50 lbs., pushing/pulling to 2000 force lbs., • walking, reaching, standing, stooping/bending, squatting, kneeling, Mental OCCASIONAL: Approximately less than 15% of the work shift or fewer than 10 repetitions per work shift

Job DescriptionGeneral Laborer / Trabajador General (English–Spanish Friendly Job Description) Join a leading global company specializing in packaging lifecycle solutions. We are seeking dedicated Production Workers / Trabajadores de Producción for a physically demanding role operating a 55‑gallon steel barrel line. This position is part of the Local 120 Union and offers a competitive pay structure. (Buscamos candidatos dedicados. Se valora la experiencia, pero estamos dispuestos a entrena Responsibilities / Responsabilidades • Operate and maintain equipment on the 55‑gallon steel barrel line., • (Operar y mantener la maquinaria de producción.), • Load, move, and handle metal barrels, drums, and plastic containers., • (Cargar y mover tambores metálicos y contenedores plásticos.), • Use chain conveyors, automatic cutters, and burners to remove paint from used barrels., • (Uso de transportadores, cortadores automáticos y quemadores.), • Perform quality checks using basic measurement tools., • (Revisiones de calidad con herramientas básicas.), • Follow all safety standards and properly handle hazardous materials., • (Cumplir con normas de seguridad y manejo de materiales peligrosos.), • Troubleshoot basic mechanical issues to keep the line running efficiently., • (Resolver pequeños problemas mecánicos.)Essential Skills / Habilidades Esenciales, • General labor or production experience., • (Experiencia en trabajo general o producción.), • Forklift operation and material handling., • (Operación de montacargas—preferred/no obligatorio.), • Mechanical aptitude for basic troubleshooting., • (Aptitud mecánica.), • Basic math and measurement skills., • (Habilidades básicas de matemáticas y medición.), • Strong communication and teamwork., • (Buena comunicación y trabajo en equipo.)Additional Skills & Qualifications / Calificaciones Adicionales, • Experience with chain conveyors, cutters, and burners., • Ability to operate welding or seam-forming equipment., • Knowledge of industrial safety standards., • Familiarity with metal fabrication processes., • Prior work in unionized or manufacturing environments., • Strong problem‑solving skills for equipment issues. Enjoy a full benefits package, including: • Medical, dental, and vision coverage, • (Seguro médico, dental y de visión), • Flexible Spending Accounts, • 401(k) with company match, • Tuition reimbursement, • Wellness programs, • Paid holidays and a supportive, team‑oriented culture, • Heavy machinery and automated equipment, • Exposure to noise, heat, and changing temperatures, • Some outdoor tasks, • Required PPE: steel‑toe boots, gloves, safety glasses, hearing protection This is a Contract to Hire position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Minneapolis,MN. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary: This position is accountable for performing welding set up, operations and activities. It also must ensure that it demonstrates all core competencies required throughout the organization. These competencies include safety, quality, production, and behavior. Essential Duties & Responsibilities: Welder - Level I • Ability to MIG or TIG weld, flat and horizontal position, • Ability to load and unload a robotic welder., • Read and understand part drawing and engineering prints., • Use current Manufacturing software accurately (Epicor), • Inspect parts as directed by the job inspection level., • Follows start of JOB and SHIFT inspections, • Follows in process inspection requirements and documents to policy and procedures., • Ability to inspect part to confirm a good or bad weld., • Operate forklift, crane and other material handling operations as required., • Consistently exhibits all desired company behaviors and follows company policies, including 5S, Safety and Continuous Improvement., • Follows quality policies/standards/procedures., • Complete MECR forms [Manufacturing/Engineering Change Request] for standard verification, • Working knowledge of sheet metal and weld characteristics [penetration, welding settings, etc.], • Ability to read and comprehend prints and drawings per level of work., • Ensure the overall cleanliness and safety of the immediate work area, as well as surrounding areas., • Always provide outstanding internal and external communications., • Ability to provide support and assistance to other employees and departments as requested., • Perform other duties as assigned., • Ability to comply with all company policies and procedures., • Professionally communication with other employees, managers, and other Company employees, • Ability to work independently and collaboratively with others to understand, conceptualize, collaborate, and execute work assignments., • Ability to adhere to ISO standards., • Ability to follow quality guidelines and procedures while performing inspections on produced parts through use of precision measuring and gauging equipment., • Perform secondary welding / grinding as required., • Ability to sustain a solid level [Competent] or better performance by meeting productivity and efficiency standards., • Perform at a Solid/Full Rating. Meeting requirements in all key responsibilities [safety, quality, productivity, efficiencies, etc.], • Ability to work overtime as needed., • Regular, reliable, and consistent attendance, • Additional duties as assigned. Welder - Level II • All of Level I essential duties and responsibilities, • MIG and TIG weld in all positions, • Set up MIG/TIG Weld, • Ability to obtain all Tig Certifications (D1.2 and D1.6) Welder - Level III • All of Levels I and II essential duties and responsibilities, • Performing at a rating of exceeding for all key responsibilities of a Level 2 [safety, quality, productivity, efficiencies, etc.], • Program and perform preventative maintenance on the robots., • Set up robots [change fixtures, load programs], • Make minor robot program adjustments., • Train others for Level I and II essential duties and responsibilities An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Supervisory Responsibilities: N/A Required Skills, Knowledge and Abilities: • Knowledge of and ability to efficiently use ERP systems., • Ability to be certified in American Welding Society – AWS certification [not all customers require certification] and MIG Certs (D1.1 and D1.3) within two months of hire. Education and Experience: • Minimum requirements for Welder – Level 1:, • High school diploma or general education degree [GED]., • 1 year of vocational training or 1 year of relevant work experience., • Lead Requirements, • Minimum 3 years’ experience in:, • MIG, TIG, and Finishing welding., • Ability to prioritize and assign work to other welders., • Demonstrated experience in process and personnel improvement activities. Physical Job Requirements • Frequent and Sustained Walking-Frequently, • Bending-Frequently, • Stooping /Squatting --Occasionally, • Frequent and extensive use of hands and arms-Frequently, • Lift/Carry up to 50 lbs.-Occasionally., • Pushing/Pulling up to 50lbs – Occasionally., • Reach at or above shoulders – Occasionally., • Reach at or below shoulders – Occasionally., • Sitting -- Occasionally, • Exposure to moving mechanical parts. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is moderate to high. The job duties outlined above are not intended to be a detailed list of job functions or responsibilities. It outlines the essential functions of the job. An individual may be required to perform other duties from time to time. The company reserves the right to amend, change or delete the contents of this description. Monday-Thursday 3:30pm-2:00pm

Job DescriptionJob Title: Apprentice Fence Builder/ Installer Pay: $22–$25/hour (Consistent Overtime) Job Description: A well-established fence contractor specializing in residential and commercial fencing, gates, and automated gate systems is seeking a Fence Installer / Construction Laborer for the upcoming season. This is a hands-on, outdoor role with the opportunity to continue working in the shop during winter, based on performance. Responsibilities: • Assist the Foreman with all aspects of fence installation, • Prepare job sites by digging holes, mixing concrete, and setting materials, • Load and unload tools, materials, and equipment, • Operate hand and power tools, skid steers, air hammers, and forklifts, • Work outdoors in varying weather conditions, • Follow all safety and environmental guidelines to maintain a secure job site Skills & Qualifications: • Experience in construction, general labor, or outdoor work, • Ability to use hand and power tools (tape measure preferred), • Experience operating a forklift and/or skid steer, • Basic computer skills for data entry and reports, • Ability to lift up to 50 lbs and stand for long periods Benefits: • Medical, dental, and vision insurance, • 401(k) with company match, • Paid vacation days and six paid holidays, • Profit sharing or annual bonus potential, • Employee assistance program, • Opportunity to continue through winter in the shop based on performance Job Type & Location This is a Permanent position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $22.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Description About QCD: Quality Custom Distribution (QCD) is the largest division of Golden State Foods (GSF), a global foodservice leader founded in 1947. Since launching in 2006, QCD has grown into a worldwide leader in custom distribution, with operations across the U.S. Headquartered in Frisco, Texas, we deliver to some of the most iconic brands in the industry. We invest in people because we believe opportunity is what you make of it. When you show up consistently, work with integrity, and lead by example, there’s room to grow. Just ask some of our leaders—many started as warehouse workers and grew into the roles they hold today. At QCD, where you start is just the beginning. In This Role, You’ll: • Audit pallets, • Monitor & track expiration dates, ensuring the FIFO method, • Track inventory data and product movements using internal systems (JDE or similar), • Monitor and reconcile inventory across multiple zones (dry, cooler, freezer), • Provide reports to the warehouse and operations teams for real-time decision-making, • Support cycle counts, audits, and inventory clean-up initiatives, • Starting pay: $20.00/hr. – $22.00/hr. DOE, • Weekly pay (every Friday), • Health, dental, and vision coverage after just 30 days. The company pays 60% of the premium., • 401(k), paid holidays, vacation, and more, • High school diploma or equivalent, • 1+ year of warehouse, inventory, or data entry experience, • Experience using a stand-up forklift and reach truck, • Experience working in a freezer/cooler with temperatures below 0 degrees, • Occasionally lifting up to 50 lbs., possibly consistently, • Strong attention to detail and data accuracy; confident with Excel and inventory systems preferred, • Experience with JDE/JDA inventory management systems, • Clear communication skills, with the ability to collaborate across teams The Schedule & Setting: • Full-time, on-site in a temperature-controlled warehouse (dry, cooler, and freezer zones), • Receiving Clerk: Starts at 6:30 a.m. and ends at 3:00 p.m. (Monday - Friday), working until the work is completed., • Inventory Clerk: Starts at 8:30 a.m., working a 10-hour day (Sunday - Wednesday) We’re not just in the business of distribution - we’re in the company of development. More than 67% of our team has been with us for 3+ years, and that’s no accident. We recognize hustle, reward consistency, and promote from within. When you show up and put in the work, we’ve got your back. And when you’re ready to lead, we’re prepared to support. At QCD, our people-first culture is grounded in simple values: treat others the way you want to be treated, hold yourself to a high standard, and always do the right thing. We believe in shared success—because when our people thrive, our customers do too. We also believe in diverse perspectives and are committed to creating an inclusive workplace where every person can thrive—respected, supported, and empowered. Diversity, in all its forms, strengthens our teams and our communities. These same commitments extend beyond our doors and into the neighborhoods we serve. Equal Opportunity Employer: We’re proud to be an equal opportunity employer. QCD values diverse perspectives and is committed to creating an inclusive workplace where every person can thrive—respected, supported, and empowered. We believe diversity, in every form, strengthens our team and our communities.

We are the Metropolitan Council, the regional government for the seven-county Twin Cities metropolitan area. We plan 30 years ahead for the future of the metropolitan area and provide regional transportation, wastewater, and housing services. ___ We are committed to supporting a diverse workforce that reflects the communities we serve. Metro Transit is one of the country's largest transit systems that employs more than 3,000 people, and prior to COVID-19, provided more than 80 million rides a year through an integrated network of buses, light rail and commuter trains, as well as resources for those who carpool, vanpool, walk or bike in the Twin Cities. How your work would contribute to our organization and the Twin Cities region: The Supply Chain Technical Trainer is responsible for analyzing, designing, developing, implementing, and evaluating high-quality technical training programs for Material Management staff. The position provides instruction across all facets of supply chain operations, including inventory management best practices, systems and software (such as ERP and MRP), automated storage and retrieval systems, material handling processes, inventory tools and equipment, forklift certification, vehicle inspection and route training, and related safety protocols. NOTE: The primary work hours will be first shift with the expectation that Technical Trainers will provide training during second and third shifts to meet training needs. Recruitment Type: This posting is open continuously and will establish a six-month candidate pool for present and future openings. Conduct a training needs analysis with stakeholders and customers. • Gather data using various collection tools/techniques., • Assess data and define/create high-level design., • Conduct stakeholder meetings and incorporate feedback into design., • Design and develop course outlines, syllabi, performance objectives, student guides, slides, exercises, performance support tools, and evaluation documents., • Conduct quality assurance reviews and incorporate feedback., • Prepare the classroom, equipment, training modules, materials, etc., prior to class., • Maintain/organize materials and equipment both inside and outside the classroom., • Act as a supervisor to students during classroom hours., • Use a hands-on approach along with dynamic activities to engage learning in the classroom. Provide technical support to Materials Management staff upon request. Evaluate the training impact on the individual, department, and organization. • Continually evaluate course effectiveness and update materials as needed., • Distribute assessment tools and collect/record data for analysis. Seek out industry knowledge of supply chain best practices, adult learning methodologies, and new training tools and strategies. * Engage in process improvement activities within the Material Management Operations team and participate in professional development opportunities. • High School diploma or GED AND six (6) years of experience in a supply chain or inventory management environment, including experience supporting or delivering technical training related to inventory or supply chain systems (e.g., WMS, SCM, ERP), • Associate's degree in supply chain-related fields, training and development, communications, information technology, adult education, or related field AND four (4) years of experience in supply chain or inventory management operations, including experience supporting or delivering technical training related to inventory or supply chain systems such as WMS, SCM, or ERP., • Two or more years of experience as a technical trainer of a supply chain or inventory management software (e.g. Warehouse Management System (WMS), Supply Chain Management System (SCM), or Enterprise Resource Planning (ERP)., • Certified Technical Trainer+, Certified Professional Trainer, or equivalent., • Experience working with a Learning Management System (LMS)., • OSHA Certified Forklift Instructor. Knowledge of supply chain and material management operations, including inventory management best practices and procedures, supply chain software applications and systems (such as ERP, MRP, WMS, and SCM), automated storage and retrieval systems, material handling processes, inventory tools, material handling equipment, and related safety protocols. * Knowledge of instructional design, adult learning principles, and the tools and techniques used to analyze, design, develop, implement, and evaluate high-quality technical training. * Ability to plan and manage multiple priorities and deadlines while taking ownership of training tasks and projects. * Technical and operational aptitude with the ability to learn new products, software applications, and technology quickly, including the Learning Management System (LMS). • Ability to build strong working relationships within and outside the Material Management department., • Proficient in Microsoft Office applications (Word, Excel, PowerPoint, etc.)., • We offer the opportunity to make a difference and positively influence the Twin Cities metropolitan area., • We encourage our employees to develop their skills through on-site training and tuition reimbursement., • We provide a competitive salary, excellent benefits and a good work/life balance.___ Union/Grade: Non-Represented/Grade F FLSA Status: Non-Exempt Safety Sensitive: No What your work environment would be: Work is frequently performed in an indoor environment. However, the position may require occasional outdoor work with exposure to weather conditions. Work may require local travel to conduct training at various facilities. Work occasionally requires out-of-state travel to attend training and conferences. Work is performed periodically near moving parts, vehicles, lifting equipment and occasionally elevated positions. Position may result in exposure to noise, diesel exhaust emissions, welding fumes, and risk of electrical shock. Requires work in varying hours to accommodate all three shifts. Position is regularly required to speak, hear, read, and write and has vision requirements (close, distance, peripheral, depth perception, ability to distinguish colors, and ability to adjust focus). What steps the recruitment process involves: • We review your minimum qualifications., • We evaluate your Work Record Evaluation (for internal ATU employees)., • We rate your education and experience., • We conduct a structured panel interview and a training presentation. If you are new to the Metropolitan Council, you must pass a drug test (safety sensitive positions only), and a background check which verifies education, employment, and criminal history. A driving record check and/or physical may be conducted if applicable to the job. If you have a criminal conviction, you do not automatically fail. The Metropolitan Council considers felony, gross misdemeanor and misdemeanor convictions on a case-by-case basis, based on whether they are related to the job and whether the candidate has demonstrated adequate rehabilitation. If you are already an employee of the Metropolitan Council, you must pass a drug test (if moving from a non-safety sensitive position to a safety sensitive position) and criminal background check if the job you're applying for is safety sensitive, is a supervisory or management job, is in the Finance, Information Services, Audit, or Human Resources departments, or has access to financial records, files/databases, cash, vouchers or transit fare cards. A driving record check and/or physical may be conducted if applicable to the position. IMPORTANT: If you make a false statement or withhold information, you may be barred from job consideration. The Metropolitan Council is an Equal Opportunity, Affirmative Action, and veteran-friendly employer. The Council is committed to a workforce that reflects the diversity of the region and strongly encourages persons of color, members of the LGBTQ community, individuals with disabilities, women, and veterans to apply. If you have a disability that requires accommodation during the selection process, please email ___.

We are the Metropolitan Council, the regional government for the seven-county Twin Cities metropolitan area. We plan 30 years ahead for the future of the metropolitan area and provide regional transportation, wastewater, and housing services. ___ We are committed to supporting a diverse workforce that reflects the communities we serve. Metro Transit is one of the country's largest transit systems, employing more than 3,200 people, and provides rides through an integrated network of buses, light rail and commuter trains. How your work would contribute to our organization and the Twin Cities region: The Inventory Control Specialist (Stockkeeper) is responsible for the receipt, storage and issuance of supplies, parts and materials to all Metro Transit departments and facilities. Follows established methods and procedures in requisitioning, receipt, issuance, storage and inventory of materials, supplies and equipment to maintain the integrity of Metro Transit's inventory system. The nature of work may involve considerable physical effort and heavy lifting. Candidates must have the ability to workdays, evenings, nights and weekends and at multiple locations as the work shift and location is bid on a seniority basis. This position requires two years working with the following: • Mechanical, electro-mechanical, computer parts inventory or related products (e.g., car/truck parts, medical devices, and circuit boards)., • Using an inventory management program/system that allows the employee to manipulate the inventory by identifying, locating, receiving, issuing/selling, etc. Examples include SAP, Maximo, Infor, etc., • Directly working with customers in either retail or wholesale environment.Recruitment Type: This posting is open continuously and will establish a six-month candidate pool for present and future openings., • Maintains an organized and efficient warehouse/stockroom by tracking and counting inventory, picking, putting away and storing stock, labeling product and storage locations and storing hazardous material and waste and safely operating MHE; maintains work area in accordance with required safety standards., • Ensures material received is accurately inventoried against packing lists or labels, receives IAW with hazardous materials law, and identifies high priority deliveries for appropriate action., • Ensures materials are properly issued by using interface tools such as radio frequency scanners, reference parts manuals, and vendor websites; references material management system(s), identifies inventory levels and any special handling requirements., • Safely operates various hand or automatic equipment used in the labeling, transport and storage of supplies; may operate a box truck in connection with the pick-up or delivery of materials and supplies., • Performs other inventory related duties as assigned. A high school diploma or GED AND you must have at least two years verifiable work experience with experience in each of the following areas: • Mechanical, electro-mechanical, computer parts inventory or related products (e.g., car/truck parts, medical devices, and circuit boards)., • Using an inventory management program, in the last 10 years, where they were able to manipulate the inventory by identifying, locating, receiving, issuing/selling, etc. Examples include SAP, Maximo, Infor, etc., • Directly working with customers in either retail or wholesale environment. License Requirements: • Valid driver's license and good driving record., • Forklift certification must be obtained within six (6) months of hire/transfer and be maintainedPhysical Requirements:, • General knowledge of methods and practices of inventory management including ordering, receipt, storage, requisitioning, inventory and issuance of large and varied quantities of supplies, materials and equipment., • Ability to safely and effectively operate Metro transit vehicles and equipment including, trucks, forklifts, hand trucks, electric carts, chain hoists and other material handling equipment., • Ability to perform duties under general supervision, work effectively as a part of a team, read, comprehend and effectively reference parts manuals, follow detailed instructions, keep accurate records, and fill requisitions timely and accurately., • Ability to employ positive customer service skills including punctuality, neat and clean appearance and execute departmental procedures with accuracy and courtesy., • Ability to work various shifts (days, evenings, nights and weekends) and locations. All shifts and locations are bid by seniority., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to effectively utilize an inventory management program as well as basic utilization of Microsoft Office suite, electronic parts manuals and other related electronic systems., • Ability to maintain attention to detail and accurate record keeping., • We offer the opportunity to make a difference and positively influence the Twin Cities metropolitan area., • We encourage our employees to develop their skills through on-site training and tuition reimbursement., • We provide a competitive salary, excellent benefits and a good work/life balance. Union/Grade: Amalgamated Transit Union (ATU) / Grade 42 FLSA Status: Non-Exempt Safety Sensitive: No What your work environment would be: Work is performed in a warehouse setting. Position requires working with automated inventory management system. This position may require working in wet or hot, humid non-weather conditions, with fumes, airborne particles or toxic chemicals, near moving parts or equipment, and in high precarious places. What steps the recruitment process involves: • We review your minimum qualifications., • We review your Work Record Evaluation (ATU members only)., • We rate your education and experience., • We conduct a structured panel interview.Note: Internal ATU employees who successfully complete all steps of the process will be awarded the position per our ATU Bargaining Agreement. Once you have successfully completed the steps above, then: If you are new to the Metropolitan Council, you must pass a drug test (safety sensitive positions only), and a background check which verifies education, employment, and criminal history. A driving record check and/or physical may be conducted if applicable to the job. If you have a criminal conviction, you do not automatically fail. The Metropolitan Council considers felony, gross misdemeanor and misdemeanor convictions on a case-by-case basis, based on whether they are related to the job and whether the candidate has demonstrated adequate rehabilitation. If you are already an employee of the Metropolitan Council, you must pass a drug test (if moving from a non-safety sensitive position to a safety sensitive position) and criminal background check if the job you're applying for is safety sensitive, is a supervisory or management job, is in the Finance, Information Services, Audit, or Human Resources departments, or has access to financial records, files/databases, cash, vouchers or transit fare cards. A driving record check and/or physical may be conducted if applicable to the position. IMPORTANT: If you make a false statement or withhold information, you may be barred from job consideration. The Metropolitan Council is an Equal Opportunity, Affirmative Action, and veteran-friendly employer. The Council is committed to a workforce that reflects the diversity of the region and strongly encourages persons of color, members of the LGBTQ community, individuals with disabilities, women, and veterans to apply. If you have a disability that requires an accommodation during the selection process, please email ___.

We are seeking a highly motivated Environmental, Health & Safety Specialist with a strong background in manufacturing environments, ideally within the pharmaceutical industry. This role is ideal for someone with a passion for safety leadership, regulatory compliance, and cross-functional collaboration. Note: This is an on-site position that pays $90,000-$98,000 per year depending on experience and qualifications, plus bonus The EHS Specialist supports the development and execution of site Environmental, Health, and Safety programs within a pharmaceutical manufacturing environment. This position has a strong emphasis on industrial hygiene, including exposure assessments for active pharmaceutical ingredients (APIs), potent compounds, solvents, and cleanroomrelated risks. The specialist ensures compliance with OSHA, EPA, FDA requirements, and internal corporate standards while partnering closely with Operations, Quality, and engineering teams. Job duties: • Develop, implement, and maintain comprehensive EHS programs, policies, and procedures aligned with OSHA, EPA, and other applicable regulations., • Conduct job hazard analyses, ergonomic assessments, and root cause investigations; recommend and drive corrective actions to closure., • Oversee confined space entry, forklift operations, nonstandard work, and energy control (LOTO) procedures, ensuring compliant training, documentation, and audit programs., • Coordinate and deliver EHS training programs; lead safety committee activities and promote engagement through toolbox talks, campaigns, and recognition initiatives., • Monitor and report on environmental compliance related to air, water, and waste; support permitting processes, inspections, and sustainability efforts., • Maintain emergency response plans, conduct drills, and ensure readiness of response teams, equipment, and documentation., • Track leading and lagging safety indicators, analyze trends, and implement proactive measures to reduce risk and prevent injuries., • Partner with Operations, Maintenance, Quality, and HR to embed EHS requirements into daily activities and longterm strategic planning., • Lead injury prevention initiatives to support a worldclass safety culture and reduce injury frequency and severity., • Identify, assess, and control sitelevel hazards; support supervisors in conducting thorough incident investigations and root cause analyses., • Analyze incident and risk trends and develop targeted training programs using appropriate media and delivery methods., • Collaborate with functional leaders to influence EHS resource allocation, project planning, and business decisionmaking., • Provide input on the design of standardized EHS systems, policies, campaigns, and training to reduce risk and ensure regulatory compliance., • Build and leverage internal networks (Operations, HR, Finance, Legal, Claims, Security) and external partnerships (industry groups, safety organizations) to strengthen EHS programs and standards., • Associates degree with major course work in EHS, risk management, or a closely related field is required; or equivalent combination of education and experience., • Professionally recognized certifications in EHS is preferred:, • ASP (Associate Safety Professional), • Certified Safety Professional (CSP), • Certified Industrial Hygienist (CIH), • Minimum of five (5) years of EHS experience in fastpaced manufacturing environments., • Proven leadership of safety committees and crossfunctional teams to strengthen engagement and accountability., • Strong working knowledge of OSHA, EPA, and federal, state, and local EHS regulatory requirements., • Hands-on experience with LOTO, confined space entry, ergonomics, and industrial hygiene practices., • Skilled in incident investigation, root cause analysis, hazard assessments, JSAs, and corrective action implementation., • Experienced in developing and delivering training programs, including new hire orientation and digital learning modules., • Proficiency in Microsoft Word, PowerPoint, and Excel, • Effective collaborator with crossfunctional partners, driving coordinated planning and continuous improvement efforts., • Able to promote a strong safety culture using data-driven, behavior-based, and research-backed methodologies., • Strong decision-making ability with a track record of independently resolving complex EHS challenges., • Excellent communication and interpersonal skills; experienced in influencing all organizational levels., • Bachelor's degree with major course work in EHS, risk management, or a closely related field., • System Administrator experience in Benchmark Gensuite with expertise in system navigation, reporting, configuration, and user support., • Professionally recognized certifications in EHS:, • ASP (Associate Safety Professional), • Certified Safety Professional (CSP) Since its beginning, Padagis has been undergoing the process of identifying what we believe will lead to the success of our organization in a competitive landscape. To that end, we have developed a set of five "core" competencies. We strive to bring employees on board the journey with us who exemplify these key competencies: • Service delivery - Understand who your internal and external customers are, identify their needs, and deliver value above their expectations..., • Active collaboration - Seek opportunities to work together across teams, function, business units, and geographies to seek success..., • Demonstrate agility - Proactively identify changes in our environment and act quickly, leading or embracing change..., • Think differently - Create, develop, and implement new ideas, products, services, or processes that involve introducing something new or significantly improving something that already exists... At Padagis our focus is on health care products that improve people's lives. We are a market-leading generic prescription pharmaceutical company that specializes in "extended topical" medications, like creams, foams, mousses, gels, liquids and inhalable products. It's a great time to join our team because we have a high growth trajectory with now more than 1,300 employees across six locations in the United States and Israel. We've already established a successful track record of launching first-to-file and first-to-market generic pharmaceutical products that have helped to make prescription products more affordable for patients and reduce costs for the healthcare system. Our team members work in a dynamic environment where opportunity is built on a foundation of honesty and transparency. Please consider joining our team where great things are happening and you can make a difference. What's Next: At Padagis a real recruiter AND the hiring manager will review your application, not just a bot. This means we pay special attention to each application submitted for the position. While it could take a couple of days for us to get back with you, please know that we appreciate you applying for the open position and ask that you monitor your email. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Service Technician Minneapolis Build a Career That Matters with One of the World's Most Respected Employers! Michelin North America, Inc. is hiring a Forklift Tire Technician for Solideal Onsite Service. Together with our numerous partners worldwide, we offer customized services to meet the maintenance requirements of forklift fleets, ensuring safe operations and maximized uptime. Let us invest in your success as you invest in ours. Mechanical experience is preferred, but expertise isn't required. We will provide training for any skills required. Must be 21 years or older. Hourly wage with excellent benefits like 401(k) matching, paid time off, dental, health and life insurance! Incentive bonus opportunities. This position is for day shift (start times may vary), 8-hour shifts with overtime available after 40 hours. As a Forklift Tire Technician, you will give input for customer service and operational improvement. You will continuously improve the knowledge of our products and services and assume full ownership of the position function, with understanding of the role in relation to the success of the Service Center. Must be able to pass a urine drug screen and DOT physical as a condition of an offer of employment, subject to ADA and reasonable accommodation process. Must be able to pass background check at an appropriate stage consistent with state law as a condition of an offer of employment. • In-house and onsite installation of forklift and other material handling tires using a hydraulic tire press., • Dismount, mount tires, and service the customer product as specified by the customer order., • Perform preventive maintenance and ensure cleanliness of all equipment including service vehicles., • Report to the Service Manager immediately any material that does not meet quality standards, equipment that requires maintenance, delays at customer sites, potential issues with customer equipment before servicing, accidents or concerns about safety or other potential hazards., • Job requires regular bending, crouching, squatting, and reaching movements, and standing for prolonged periods., • A "high school diploma" or equivalent experience., • A valid driver's license., • A dedication to prioritize personal safety and the safety of others., • Punctuality and effective time management skills., • A strong attention to detail, initiative, and critical thinking., • Ability to work independently., • Ability to lift up to 75 pounds required, with lift-assist available IE; forklift, Lift table, Lift Gate etc., • Effective communication with customers on a professional level., • Knowledge of MS Office Suite (Word, Excel, etc.) software applications and ERP system are a plus, but not required., • In a Tobacco-free environment, including alternatives (vaping)., • In a service vehicle exposed to various noises and hot/cold conditions at customer locations (indoor/outdoor)., • In an industrial environment Competencies Target • Attention to Detail 3, • Customer Service Relationship 2, • Decision Making 1, • Teamwork & Collaboration 1, • Product Knowledge 2, • Networking 1 To ensure maintenance of motorized vehicle, forklifts, equipment and accessories of lifting and handling, and eventually technical coordination Ready to Shape the Future of Innovation? Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare. The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide. Why Michelin? * Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement. * Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities. * Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation. * Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities. Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at ___. This position is not available for immigration sponsorship. We build the future with people like you. Begin your career with Michelin today!

Job Description HIRING FOR MECHANICAL ASSEMBLER IN MINNEAPOLIS, MN, PAY $22-24/HR Description Individual must be a mechanically-inclined team player that's capable of reading work orders and blueprints and assembling hydraulic pumps, valves and kits for the car wash, machine tool coolant and oil and gas industries. Additional duties they will be trained on are forklift operation and pump/valve testing. This company manufactures and assembles over 100+ different types of pumps ranging from entry-level assembly to intermediate/expert-level assembly. Candidates can expect to complete full assemblies from start to finish as well as sub assemblies. Candidates can expect to train for two weeks to learn the products, SOP's, and gain general knowledge about their clients and who they work with in large capacity. Candidates will move around to different assembly lines which can also include working with different leads/supervisors. This can also include working with other departments - warehouse, kitting, shipping/recieving, etc... Skills Assembler, assembly, mechanical assembly, hand tool, production, blueprint, power tool, mechanical, assembly line Top Skills Details Assembler,assembly,mechanical assembly Additional Skills & Qualifications 6+ months mechanical assembly experience in an industrial/manufacturing environment 1+ year work history working in a team environment. Character is key for this position. Individuals must be able to work in a team environment and show interest/initiative in learning the products. Job Type & Location This is a Permanent position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $22.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Minneapolis,MN. Application Deadline This position is anticipated to close on Apr 4, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: General Production WorkerJob Description The General Production Worker will assist in the operation of a pellet production line, including forklift operation, mixing raw materials, monitoring the production process, packaging products, and preparing them for shipping. Responsibilities include utilizing a forklift to move materials, ensuring product quality, and maintaining cleanliness in the work area. Responsibilities • Operate forklift to transport raw materials and finished products., • Load raw materials into the mixer at the start of the production line., • Monitor production line to ensure smooth operation and address any issues., • Package materials into sacks after processing., • Load products into the oven using a forklift., • Stage final products for shipping by weighing and wrapping them with plastic wrap., • Sweep and clean floors to maintain a tidy work environment.Essential Skills, • Mechanical aptitude., • Comfortable getting certified on a sitdown forklift., • 6+ months of experience working in a fast-paced, dirty environment., • Ability to lift 50+ lbs.Additional Skills & Qualifications, • Sitdown Forklift Experience., • Experience operating machinery. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Shoreview,MN. Application Deadline This position is anticipated to close on Apr 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Aerotek - - Responsibilities: Read work orders and blueprints to assemble hydraulic pumps, valves and kits; Complete full assemblies from start to finish as well as sub assemblies; Operate forklift and test pumps/valves; Move between assembly lines and work with different leads/supervisors; Collabo

Aerotek - - Responsibilities: Ensure manufacturing lines have the right parts at the right time; Maintain accurate inventory through stocking and cycle counts; Operate warehouse equipment, including a sit-down forklift; Assist with light assembly and kitting; Keep warehouse and dock areas clean, or

Compass Group - 700 Southeast 24th Avenue - Responsibilities: Receives, stores and distributes material, tools and products; Operates a forklift; Builds and prepares orders; Reads production schedule and requisitions to determine items to move; Maintains inventory records.

Sonepar - - Responsibilities: Load and unload trucks and move boxes/material in a safe manner using a forklift, pallet jack, handcart, cherry pickers, walking riders, reach trucks, EZGo carts, or other device (no experience required - we provide training); Count, check and record items coming into

Venture - - Responsibilities: Load, unload, stock tires and auto parts in a fast-paced warehouse environment using industrial vehicles such as a forklift or picker equipment; Use scanners to find and put away tires and assist with inventory control; You can expect to lift 50 pounds consistently thr

Aerotek - - Responsibilities: Supply all raw materials for production and replenish supplies from the warehouse when inventory is low.Transport finished goods and scrap material into staging area and move material within the plant and worksite.Communicate effectively with co-workers, supervisor, an

Aerotek - - Responsibilities: Operate forklift to move product throughout the distribution area.Accurately load and unload product in accordance with customer/vendor orders using any necessary container configuration; Accurately and legibly completes all paperwork; Source product inventory for ship

Sonepar - - Responsibilities: Load and unload trucks and move boxes/material in a safe manner using a forklift, pallet jack, handcart, cherry pickers, walking riders, reach trucks, EZGo carts, or other device (no experience required - we provide training); Count, check and record items coming into