Trabajos quality improvement en Manchester - Page 9Crear alertas

Location: Fully remote Salary: £50,000+ (depending on experience) The Opportunity You won’t just deliver programmes. You will build them from the ground up. Our client is launching a new suite of digital and AI apprenticeships, starting with the Artificial Intelligence (AI) Data Specialist (ST0763) standard, followed by Data Technician, Data Analyst, Digital Support Technician and Data Engineer pathways. This is a senior role focused on creating high-quality, scalable curriculum and then supporting its successful delivery. For the first three months, your primary focus will be to design and build a complete apprenticeship programme from scratch. From there, you will transition into delivery, refinement and supporting wider growth across our digital provision. The Role Phase 1: Curriculum Design and Build (First 3 Months) You will lead the end-to-end development of the AI Data Specialist programme. This will include designing structured lesson plans and session content, creating assignments and assessment briefs, and developing AI-marked questions supported by clear expected answers and marking logic. You will ensure all content is mapped effectively to Knowledge, Skills and Behaviours (KSBs) and aligned to End Point Assessment (EPA) requirements. You will also design meaningful off-the-job (OTJ) activities and support the development of eLearning and SCORM modules. All content will be structured within our LearnDash and MyPortfolio ecosystem. You will be starting from a blank page, with full ownership to build a programme that is engaging, rigorous and scalable. Phase 2: Delivery and Continuous Improvement Once the first cohort is live, you will take an active role in delivery. This will include facilitating fortnightly live sessions, guiding apprentices through their learning and portfolio development, and providing structured feedback. You will continuously refine the curriculum based on learner progress, engagement and outcomes, ensuring strong alignment with EPA success and real workplace application. Phase 3: Scaling the Provision As the programme grows, you will support the onboarding and development of additional Development Coaches, ensuring consistency and quality in delivery. You will also contribute to the development of further programmes across our digital and data pathways, building on the foundation established in the initial phase. About You This is not a standard Development Coach role. We are looking for someone who can both build and deliver at a high level. You will have strong experience in delivering digital, data or IT-related apprenticeships, alongside a solid understanding of data concepts and emerging applications of AI within business contexts. You will be confident in designing curriculum, creating learning content and developing assessment materials. You will have a clear understanding of apprenticeship standards, KSB mapping and EPA requirements. Most importantly, you will be comfortable starting from scratch, able to structure complex topics into clear and effective learning, and willing to take ownership of building something new. Our client’s Delivery Model Our approach is modern and continuously evolving. Delivery is centred around structured, task-based learning supported by fortnightly live sessions. Apprentices build evidence through our MyPortfolio system, supported by eLearning modules and AI-assisted marking and feedback. They are not tied to traditional delivery methods and are actively developing more effective and engaging ways to support learning. What Success Looks Like Within three months, the AI Data Specialist programme will be fully designed, built and ready for launch. Within six months, the programme will have at least 30 active apprentices, with strong engagement and progress, and you will be supporting additional Development Coaches. Within twelve months, a full suite of digital apprenticeship programmes will be established, with a scalable and consistent delivery model in place. Suitability This role will suit someone who is motivated by building and improving programmes, not simply delivering existing content. It is not suited to individuals who prefer highly structured environments with pre-defined materials or limited scope for ownership. Our client is a growing apprenticeship provider with a strong focus on quality, innovation and practical impact. This role offers the opportunity to shape how digital and AI apprenticeships are designed and delivered, with genuine ownership and influence over the direction of the provision

Join our growing team at Anglian Home Improvements, a leading provider of high-quality installation services for windows, doors, conservatories, and roof trims. We pride ourselves on delivering exceptional craftsmanship and excellent customer service. We are looking for skilled installers to help us continue our tradition of excellence. The Role Due to continued growth and demand, we are seeking experienced self-employed Window & Door Installers to join our hardworking team. In this role, you will be responsible for the precise installation of our fantastic products in and around the local area. You will work closely with clients to ensure that all installations meet our high standards of quality and safety. Key Responsibilities Install and fit windows & doors with precision and care. Install and secure products using the appropriate tools and techniques. Accurately measure and cut materials for optimal fitting. Complete interior and exterior finishing work, including trim and moulding. Always providing excellent customer service and professionalism. Maintain a clean and safe work environment. What We`re Looking For Proven experience as a Window & Door Installer or similar role. Strong knowledge of carpentry and joinery techniques. Familiarity with building codes and safety regulations. Proficiency in using hand and power tools. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Valid driver’s license and reliable transportation. Why Join Us Uncapped earning potential, weekly payments Immediate start Monthly incentives & prizes Continuous volumes of work Opportunity to develop in the industry Van available for work purposes We install home improvement excellence - We set the standard. We are passionate about delivering a high-quality installation service to every single customer. To make sure our installations teams are the best in the industry we provide a structured on-boarding induction to all new installers. Kick start your career in the industry with the best and join our Anglian family! Our Company is committed to monitoring & aligning its Policies with up-to-date Government guidance on reducing the spread of respiratory infections in the workplace. Through the Company’s value of “Succeed Together” we are committed to Equality, Diversity and Inclusion. We recruit the ‘best person for the job’ regardless of any protected characteristics as defined by the Equality Act 2010 creating an inclusive working environment and culture for our employees

Health & Safety Advisor (CAT A & B Fit-Out Projects) Salary: £45,000 - £50,000 + Package Location: Stockport, UK Job Type: Permanent About the Company Our client is a well-established and highly regarded specialist in delivering commercial projects across the UK. With a strong reputation for quality, reliability, and professionalism, they have successfully built long-term partnerships with a range of leading landlords, investors, and private sector organisations. Known for their collaborative approach, they operate as a trusted delivery partner rather than just a contractor. The Role We are seeking an experienced Health & Safety Advisor with strong knowledge of CAT A & CAT B commercial fit-out projects. This is a dynamic role involving national travel, supporting multiple sites to ensure the highest standards of health, safety, and compliance are maintained. Key Responsibilities Provide expert health & safety advice across multiple commercial fit-out sites Ensure compliance with UK health & safety legislation and company policies Conduct site inspections, audits, and risk assessments Support project teams in implementing safe systems of work Investigate incidents, accidents, and near misses, producing detailed reports Deliver toolbox talks and health & safety training to site teams Monitor and review RAMS (Risk Assessments & Method Statements) Work closely with site managers and stakeholders to promote a strong safety culture Identify areas for improvement and implement corrective actions Requirements NEBOSH General Certificate (or equivalent) - essential Proven experience in CAT A & CAT B commercial fit-out projects Strong knowledge of current UK health & safety legislation Experience conducting audits, inspections, and risk assessments Excellent communication and interpersonal skills Ability to work independently and manage multiple sites Full UK driving licence and willingness to travel nationally Strong attention to detail and problem-solving skills Apply: If you're interested in this opportunity, then please get in touch today with our Commercial Specialist, Mark Harris on Building Careers UK specialises in Construction and Property recruitment and serves as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. By applying for this job, you accept the Terms and Conditions, Privacy Policy, and Disclaimers which can be found on our website. We welcome applications from individuals of all backgrounds, experiences, and identities. Our recruitment process is designed to ensure equal opportunities for all candidates, regardless of age, gender, race, ethnicity, religion, disability, sexual orientation, or any other characteristic. Please Note: Due to high volume of applicants, only those shortlisted will be contacted. INDCOM

Cadent Gas Ltd Shape the commercial decisions that keep the network moving In this role, you’ll play a critical role in ensuring Cadent delivers value for money while meeting regulatory, operational and customer commitments. Sitting at the heart of our Commercial team, you’ll provide expert cost and commercial control across a complex operational environment, influencing decisions that directly impact business performance. This role goes far beyond reporting numbers. You’ll work closely with Network Operations, Finance, Delivery Partners and senior stakeholders to challenge costs, manage risk and ensure that our commercial arrangements remain robust, competitive and compliant. From forecasting and auditing to contract management and cost assurance, you’ll bring insight, rigour and confidence to every commercial decision. You’ll also help shape how we work – driving improvements in data quality, commercial processes and performance, while supporting colleagues and suppliers to operate to the highest standards. It’s an opportunity to make a genuine difference in a high-profile, highly trusted role. Why you’ll love this role This is a varied and commercially influential role where your expertise will be seen, valued and relied upon. Strategic Impact – Provide commercial insight that supports operational delivery and long-term business objectives. End-to-End Commercial Ownership – Manage forecasting, reporting, assurance, benchmarking and cost challenge across internal teams and contractors. Stakeholder Influence – Work collaboratively with networks, finance, legal and delivery partners to drive the right outcomes. Problem Solving at Scale – Investigate complex cost and performance issues and develop clear, practical solutions. Continuous Improvement – Identify efficiencies, improve commercial processes and raise standards across the business. What you’ll bring You’re a confident commercial professional who combines strong technical capability with the ability to influence, challenge and build trust. Commercial Expertise – Proven experience in cost control, forecasting and commercial management within a regulated or complex operational environment. Contract Knowledge – Strong understanding of contract frameworks (such as NEC) and the ability to manage claims, variations and compensation events. Analytical Strength – Comfortable analysing complex data, identifying trends and translating insight into clear recommendations. Stakeholder Confidence – Able to challenge constructively, support negotiations and communicate effectively with technical and non-technical audiences. Delivery Mindset – Proactive, detail-focused and driven to improve performance, value and compliance. If you’re looking to develop your career and want a role where your expertise genuinely shapes outcomes, we’d love to hear from you. Join Cadent and help ensure our commercial decisions support a safe, efficient and reliable gas network for the future. Apply now to be part of our Commercial team. Disclaimer: While the closing date is set as mentioned, we reserve the right to close the application process earlier if necessary, depending on the unique circumstances of each role

Children’s Care Home Managers – Join a Growing Provider Location: Prestwich, Manchester Salary: £50,000 – £75,000 DOE About the Role A rapidly expanding healthcare and care services group is launching its children’s services division, built on the same values that drove its impressive growth in other sectors. Over the past 24 months, the group has grown to 60+ sites, demonstrating its commitment to quality, care, and innovation. Now, it is bringing that same approach to children’s residential care. We are looking for passionate Children’s Care Home Managers to join at the very beginning of this exciting journey. This is a rare opportunity to shape a new service, deliver outstanding care for children with Emotional and Behavioural Difficulties (EBD), and play a key role in building a high-performing team. Key Responsibilities * Lead and manage the day-to-day operations of the home, ensuring the highest standards of care for children with EBD. * Prepare the home for registration, liaising with Ofsted and other regulatory bodies as required. * Develop, implement, and maintain policies, procedures, and care plans in line with regulatory requirements and best practice. * Recruit, develop, and manage a skilled and motivated staff team, providing supervision, mentoring, and performance management. * Ensure safeguarding, risk assessment, and behaviour management frameworks are robust, consistent, and effective. * Maintain high-quality care documentation, reporting, and auditing to ensure compliance and continuous improvement. * Foster a nurturing, structured environment that promotes safety, stability, and positive outcomes for children. About You We are looking for an experienced and ambitious Registered Manager, or a strong Deputy ready to step into a management role, who: * Holds Level 3 Residential Childcare (essential) * Holds Level 5 Leadership & Management qualification, or is working towards * Has a minimum of 3 years’ residential experience in the last 5 years * Has at least 2 year in a senior or management position * Has a strong understanding of safeguarding and working with EBD children * Is motivated to lead, innovate, and shape a high-performing home rather than simply “keeping the home afloat” What We Offer * Competitive salary, depending on experience (£50,000 – £75,000) * Expert support from an experienced Responsible Individual during registration * Opportunity to grow into a Responsible Individual role in the future * The chance to lead a brand-new, fully renovated home with a C2 planning in place Why Join * Lead a brand-new children’s home in a fast-growing, ambitious organisation * Clear career progression, with opportunities to grow into senior leadership or Head of Children’s Services * Be part of a values-led provider focused on delivering exceptional care * Make a meaningful difference in children’s lives from the ground up If you are an ambitious and experienced residential manager passionate about making a difference for children with EBD, we would love to hear from you. If this particular opportunity is not of interest, Top Marks Recruitment works with a wide range of Children’s Home organisations across the country, many of which offer excellent opportunities that we would be happy to discuss with you. With strong relationships across the sector, we can help introduce you to a range of opportunities that align with your experience and career ambitions

Water Quality Sampling Manager, Hybrid (Manchester), COR7506 Are you an experienced water quality professional with strong leadership skills and a passion for compliance? This is a fantastic opportunity to take ownership of a critical function within a forward-thinking organisation. The Role As a Water Quality Sampling Manager, you will lead the development and delivery of water sampling operations, ensuring the highest standards of quality and regulatory compliance. You'll design and implement a robust Quality Management System aligned with ISO standards and industry requirements, while overseeing audit processes and accreditation activities. The Company Our client plays a vital role in delivering essential utility services, with a strong focus on quality, compliance, and continuous improvement. They offer a supportive and collaborative environment where your expertise will directly impact operational excellence and regulatory success. The role is hybrid remote, from their Manchester offices. What's Required? The ideal candidate will have: Strong knowledge of water quality regulations and accreditation frameworks, UKAS and DWTS Experience working with quality systems and audit processes (e.g. ISO standards) A background in water sampling, laboratory environments, or similar Proven leadership skills, with the ability to manage and develop a team Excellent organisational and communication abilities, with a proactive mindset Any experience implementing quality systems or working towards accreditation would be advantageous. Next Steps If you're ready to take on a key role in delivering safe, compliant water quality operations, apply today! Water Quality Sampling Manager, Hybrid (Manchester), COR7506 Corriculo Ltd acts as an employment agency and an employment business. #ChannelC #AS TPBN1_UKTJ

We are looking for a Programmatic Executive (Paid Media) to work for a Marketing Agency in Trafford Park Hybrid 3 Days Office 2 Remote Role Purpose To support the planning, execution, optimisation, and reporting of Programmatic campaigns across Display, Video, CTV, and Digital Audio. This role focuses on delivering high-quality campaign performance and accurate reporting across gambling accounts, while also supporting PPC and Paid Social activity where required. The role requires strong attention to detail, confidence with data, and the ability to communicate results clearly to both internal teams and clients. Key Responsibilities ● Plan, build, optimise and report on Programmatic campaigns across Display, Video, CTV, and Digital Audio platforms. ● Produce weekly and monthly performance reports that are clear, data-driven, and insight-led. ● Confidently present performance updates and recommendations to clients when required. ● Support forecasting, media planning, and budget allocation across Programmatic campaigns. ● Work closely with DSPs and platform partners to optimise performance and unlock new opportunities. ● Proactively research and evaluate new DSPs, inventory sources, and buying opportunities to enhance campaign performance. ● Maintain high standards of tracking, UTMs, and performance measurement. ● Assist with Google Ads campaigns where required. ● Support Paid Social campaigns when needed to ensure cross-channel alignment. ● Pull together client decks and contribute to proposals and strategic presentations. ● Work confidently within spreadsheets and Google Sheets to manage data-heavy reporting. ● React quickly to performance changes while maintaining accuracy and quality control. ● Stay up to date with developments in Programmatic, CTV, Audio, and wider digital buying trends. Success Measures ● Programmatic campaigns delivered on time, within budget, and meeting or exceeding agreed KPIs. ● Weekly and monthly reporting delivered accurately, clearly, and without rework. ● Clients feel confident in performance updates and strategic recommendations. ● Gambling and performance-led accounts show consistent optimisation and improvement. ● High accuracy across tracking, UTMs, and reporting infrastructure. ● New DSPs or inventory opportunities researched and tested where commercially viable. ● Media plans and forecasts are delivered accurately and support account growth. ● Strong cross-channel collaboration with PPC and Paid Social teams. ● Ability to manage multiple accounts efficiently during high-pressure periods. Skills & Attributes ● Hands-on experience with Programmatic campaigns. ● Good working knowledge of major DSPs and buying platforms. ● Solid understanding of GA4, tracking setups, and performance measurement. ● Confident working with spreadsheets and Google Sheets, comfortable handling large datasets. ● Strong reporting skills with high attention to detail and data accuracy. ● Clear and confident communicator, comfortable presenting performance to clients. ● Commercially aware, able to identify opportunities to scale and optimise campaigns. ● Adaptable and able to support PPC and Paid Social where required. ● Highly organised, able to manage multiple accounts and deadlines. ● Proactive, reactive, and comfortable working in a fast-paced environment

Data Engineer (Python) 6 months initial 2 days a week onsite in Manchester Outside IR35 This organisation delivers data-driven insights to media and market research clients. Its platform provides actionable data solutions to global brands, helping them make informed, strategic decisions. The Role You will join the Data Products team and take ownership of building and evolving behavioural data products. You will turn raw data signals into structured, high-quality datasets. You will use Python and SQL to define schemas, apply business logic, enforce quality checks, and deliver client-ready data feeds. The role follows a hybrid model with two days in the office each week and the rest remote. Key Responsibilities • Design and evolve data product schemas, translating requirements into well-structured datasets, • Build and maintain data feeds using Python and SQL for transformation, validation, and delivery, • Monitor and improve data quality through checks, diagnostics, and analysis of large datasets, • Work with Product, Engineering, Apps, and ML teams to deliver new features and improvements, • Maintain clear, accurate documentation for data products and processes About You You enjoy working close to data and solving how real-world behaviour translates into clean, reliable datasets. Required Skills • Strong Python skills with experience writing production-quality data pipelines, • Solid SQL skills with experience handling large datasets, • Strong attention to detail with a focus on data quality and validation, • Clear communicator who works well across teams, • Comfortable using AI tools to improve productivity and learning Nice to Have • Experience with AWS data tools such as S3, Spark, Athena, or workflow orchestration tools, • Exposure to AI-assisted workflows Why Join You will join a team that values growth, collaboration, and continuous improvement, with support to develop your skills and progress your career

Electrical Fitter Greater Manchester Aerospace & Defence / Manufacturing Industries welcome 12 Month Contract – Likely to be extended Are you an Apprenticeship trained Electrical Fitter with a passion for high-quality workmanship? We are seeking a skilled professional to join our clients electrical manufacturing department to play a key role in the build, assembly, and certification of mission-critical products. The Role As an Electrical Fitter, you will be responsible for the end-to-end manufacturing and testing of electrical components. You won’t just be building; you will be the guardian of quality, certifying your own work and ensuring every product meets rigorous industry standards. Key Responsibilities Perform complex electrical wiring and assembly tasks in accordance with defined workmanship standards. Take ownership of quality by certifying your own work in line with company procedures and maintaining approvals through regular audits. Utilize a wide range of tools, equipment, and measuring instruments to meet precise build and test specifications. Ensure all manufacturing data packs and paperwork are completed accurately while meeting strict project timescales and budgets. Contribute to a safe, clean, and efficient working environment through proactive process improvement suggestions. To be successful in this role, you must hold a formal qualification via one of the following routes: Approved Apprenticeship Framework (Modern/Standard). City & Guilds Parts 1, 2 & 3 (with associated Vocational Units/Further Education). NVQ Level 3 / BTEC ONC/HNC in a relevant electrical discipline. Desirable Skills: IPC 610 certification or training (Highly Preferred). Previous experience within the Aerospace or Defence industry. Certified training in Manual Handling, Lifting & Slinging (including overhead cranes), and ESD protocols. The Company Award-winning company; committed to providing an inclusive working environment where workers can be themselves and everyone has equal opportunity to reach their full potential. They value difference and know that a diverse community makes for greater innovation and brings a breadth of skills, experience, and perspectives. Please note that security checks will be carried out prior to the start date

Grounds Maintenance Manager Location: Manchester, M11 area Salary: Up to £40,000 dependant on experience Contract type: Full time, Permanent Shift Pattern: Monday - Friday 06:00 - 15:00 About the role We are looking for an experienced and passionate Head Gardener to lead the maintenance and enhancement of landscaped areas across Manchester. The successful candidate will play a key role in delivering a high-quality green environment, with a strong focus on client engagement, biodiversity, and sustainable horticultural practices. You will ensure exceptional standards of turf management, landscaping, and overall site presentation, while leading and coordinating the grounds team, contractors, and suppliers to deliver first-class outdoor spaces. Operational Leadership Lead, motivate, and supervise the landscape gardening team to deliver consistently high standards across all sites. Plan and manage all routine and seasonal horticultural activities, including planting, pruning, mowing, weeding, mulching, and irrigation. Conduct regular site inspections to ensure health, safety, and quality standards are maintained.Client & Stakeholder Engagement Act as the main point of contact for the client in relation to landscape maintenance. Build and maintain strong working relationships with stakeholders, ensuring expectations are met and exceeded. Provide regular updates, attend meetings, and contribute to future planning and improvement initiatives.Biodiversity & Sustainability Implement and promote sustainable horticultural practices to minimise environmental impact, including integrated pest management, organic methods, and water efficiency. Lead biodiversity initiatives such as habitat creation, wildflower planting, and ecological monitoring. Work collaboratively with stakeholders to align landscape management with wider environmental strategies. Horticultural Standards & Development Maintain high horticultural and aesthetic standards across all areas, aligned with a premium site presentation. Identify opportunities for improvement to enhance biodiversity, visual appeal, and ecological value. Stay up to date with industry best practices and introduce innovation where appropriate.Administration & Reporting Manage schedules, work plans, and budgets in collaboration with management and client teams. Maintain accurate records of maintenance activities, environmental data, and biodiversity progress. Ensure compliance with all health, safety, and environmental legislation and internal policies.Qualifications & Experience: Level 3 or higher qualification in Horticulture, Landscape Management, or a related field (or equivalent experience). Proven experience in a senior horticultural or grounds management role, ideally within a high-profile or public-facing environment. Strong knowledge of sustainable horticulture and biodiversity principles. Experience in client liaison and managing expectations effectively. Excellent organisational and leadership skills, with the ability to develop and motivate a team. PA1/PA6 spraying certificates and a full UK driving licence are essential.Desirable: Knowledge of ISO 14001 and other environmental management systems. Familiarity with BREEAM, Urban Greening Factor, or other ecological design frameworks. Experience in using digital work planning or FM systems for scheduling and reporting.Benefits: Annual leave: 25 days holiday plus bank holidays. Competitive salary with annual reviews Company vehicle or vehicle allowance Opportunities for training and career progression Involvement in high-profile and award-winning landscaping projects Family-friendly policies: Enhanced maternity and shared parental leave. Employee Assistance Programmes: Support for personal and professional challenges. Voluntary benefits: Discounts on retail, holidays, gym memberships, and more. Financial wellbeing support: Resources to manage your finances. Recognition schemes: Colleague of the month and annual awards. Volunteering policy: Two days per year to support a cause of your choice. Mental health support: Comprehensive resources and support.Apply now and a member of the team will be in touch

Service Desk Team Leader Leading Managed Services Provider Hybrid - Manchester Paying up to £50,000, depending on experience A fantastic opportunity has arisen for an experienced Service Desk Team Leader to join a highly respected Managed Services Provider. This role is centred on strong people leadership, guiding an established infrastructure team to deliver high‑quality services across a broad customer base. The successful candidate will take ownership of day‑to‑day team management, mentoring, service quality, and workload coordination. The environment is built on VMware, enterprise backup solutions including Veeam and Commvault, and infrastructure from Dell and HP. While a solid technical background in these technologies is highly desirable, the primary focus is on leading, supporting, and developing the team. Key Responsibilities Lead, motivate, and develop the Infrastructure Team, fostering collaboration and high performance. Oversee workload distribution, resource planning, and performance management. Ensure infrastructure services remain stable, secure, and aligned with customer requirements. Drive continuous improvement in processes, documentation, and operational efficiency. Work alongside senior leadership to support business strategy and service delivery excellence. Skills & Experience Proven experience leading or mentoring an infrastructure or technical support team. Strong communication and people‑leadership capabilities, with the ability to guide, influence, and support others. Technical understanding of VMware, Veeam, Commvault, Dell, and HP infrastructure solutions is highly advantageous. Confident in managing priorities, improving workflows, and maintaining high service standards. Must be eligible for SC Clearance. Paying between £(phone number removed), depending on experience. Hybrid based - Manchester

Resident Site Engineer, P&G, Manchester. You will be working a rotating shift pattern with a combination of days and nights within a small team of Engineers. Working 7 days and 7 nights - in a 28 day period make this an attractive opportunity. The role comes with excellent benefits to include 25 days holiday plus stats, employer contributory pension scheme and private healthcare. Where do people love what they do, and being great at what they do? At Swisslog, that’s where! Our teams are the heart of a world-leading Robotics company that’s harnessing the power of technology to shape the future of intralogistics. The result? We’re transforming performance and efficiency for customers across the globe, giving them the vital edge in their markets. Key Responsibilities for Resident Site Engineer / Maintenance Engineer * Reporting to the Site Engineering Manager, undertaking scheduled repairs in accordance with the manufacturers recommendations and industry standard practices. * Electrical and Mechanical breakdown and Planned Preventative Maintenance (PPM) on a variety of automated machinery, to include automated storage and retrieval systems, chain and roller conveyors, gravity roller conveyors and cranes. * Completing all work safely and on time, whilst ensuring quality of output at all times. * You will be involved in continuous improvement projects. * Able to represent the company in a professional manner at all times and maintain excellent customer relations, ensuring that all decisions that are made on site are always with the customer in mind. What you need to succeed in this role * NVQ Level 3 in Mechanical or Electrical Engineer or equivalent qualification. * Happy to work at heights. * This is a customer facing role, so you must be able to communicate effectively at all levels. * Able to work alone and as part of a team. Our promise to you Swisslog is a world of opportunity for people who can deliver a game changing mission: driving the future of intralogistics, by shaping an era of robotic and data-driven automated solutions that create exceptional customer value. Join us on this journey and you’ll be part of a global enterprise that’s proud of its Swiss roots - and hugely excited by the worldwide opportunities open to everyone in the Swisslog family. So come and realize your potential, in a team that’s united by passion and driven by the OneSwisslog team spirit. Join the journey! We´re looking forward to receiving your application

QA Manager – Food Manufacturing Manchester Area £40,000 – £45,000 | Monday–Friday, Days Not every QA Manager role offers the chance to genuinely make an impact. This one does. This is a business that has already been through a significant period of change and is now moving forward with clear direction. With new customers secured, their own brand launched, and a refreshed senior leadership team in place, the focus is firmly on building for the future. Reporting into the Technical Manager, you'll be joining someone who is known for being forward-thinking, collaborative, and passionate about developing strong teams. This is someone we know, have worked with before and have had brilliant feedback for. This role is positioned as a true number two within the technical function, offering both responsibility and the opportunity to influence how things are done moving forward. What you'll be doing: Supporting and developing a small QA team (currently two people) Helping to embed and improve quality systems and processes across site Ensuring compliance with food safety, quality, and regulatory standards Working closely with the Technical Manager to drive continuous improvement initiatives This isn't about maintaining the status quo. It's about building on recent progress and helping shape a quality function that supports the business as it continues to grow. What they're looking for: Experience as a QA Manager or Senior QA Supervisor in food manufacturing A strong understanding of food safety and quality systems Someone proactive, collaborative, and comfortable working in a changing environment If you're looking for a role where you can step up, contribute, and be part of a business moving in the right direction, it's worth a conversation. Apply below for a confidential conversation. TPBN1_UKTJ

Manufacturing Automation Engineer Northwest UK | Permanent | Days A long-established engineering business with over a century of innovation is looking for a Manufacturing Automation Engineer to support the introduction of automated welding and assembly across its Northwest site. The company supplies high-quality engineered solutions to defence customers worldwide and is actively investing in modernising its manufacturing capability. What you'll be doing: Identifying processes suitable for automation and defining technical requirements for robotic welding cells, CNC fabrication centres, and automated handling systems Supporting CAPEX activity through business case analysis (CBA and ROI) Leading installation and Site Acceptance Testing for new robotic systems Programming and optimising robot paths for complex geometries using offline programming tools Troubleshooting PLC logic and HMI interfaces Working with Maintenance to establish preventative maintenance schedules for automated systems Driving continuous improvement using Lean tools and process data to reduce scrap and improve cycle times Designing and refining jigs and fixtures to improve dimensional accuracy Creating SOPs, technical documentation, and leading FMEAs for automated lines Ensuring compliance with EHS standards including CE/UKCA and PUWER Supporting NPI with Design for Manufacture input Mentoring operators in robot safety and intervention procedures Coordinating across Quality, Production, and Maintenance teams What you need: HND or degree in Manufacturing, Engineering, or Mechatronics Proven experience in an automation-focused manufacturing role Proficiency in at least one major robot language plus experience with PLCs and HMIs Background in Lean Manufacturing, process planning, and data-driven optimisation (cycle time, takt, RFT) Understanding of large-scale manufacturing and quality tools (Six Sigma/Lean) Practical NPI experience Ability to identify technical, cost, and schedule risks with knowledge of relevant HSE regulations Strong IT skills including Microsoft Office Project management accreditation (PRINCE2, Agile, PMP) and Lean/Six Sigma certification beneficial What's on offer: Competitive salary Attractive pension scheme with enhanced employer contribution Half-day Fridays Life assurance and company sick pay (increasing with service) Employee Assistance Programme and wellbeing initiatives Additional holiday and long-service rewards Cycle-to-work scheme, free on-site parking, and EV charging This is a permanent role with a respected defence manufacturer that is actively investing in automation across its production lines. The business holds Gold-level Armed Forces Covenant status and welcomes applications from service leavers, reservists, and cadet force volunteers. Data Protection Notice: By applying for this position, you consent to Recruit Engineering processing and storing your personal data, including your CV, contact details, and any other relevant information, for the purpose of providing work-finding services. This consent includes forwarding your details to our clients and storing your information on our recruitment software database. Your consent will last for two years, and you can withdraw it at any time by contacting us in writing or via email

Manufacturing Engineer – Heavy Fabrication Northwest UK | £50,000 | Permanent A long-established defence engineering specialist is looking for a Manufacturing Engineer to join its Northwest Engineering Centre of Excellence. You'll be supporting fabrication and heavy manufacturing operations, driving process improvement, build quality, and production efficiency across large-scale welded and fabricated assemblies for military applications. What you'll be doing: Optimising and standardising manufacturing processes for complex welded and fabricated assemblies Identifying opportunities to reduce waste, improve cycle times, and enhance tooling and fixture effectiveness Analysing quality trends and driving corrective and preventive actions Developing and managing structured improvement plans with measurable outcomes Leading cross-functional teams to embed lean practices and improve cost and delivery performance Supporting NPI activity with a focus on Design for Manufacturability (DFM) in fabrication and welding Promoting continuous improvement using structured problem-solving tools including 8D and CAPA Ensuring compliance with EHS, manufacturing, and quality standards across fabrication processes Implementing containment and long-term corrective actions for process deviations What you need: HND, Higher/Advanced Apprenticeship, or Degree in Manufacturing or Mechanical Engineering Proven manufacturing engineering background in a technical, industrial, or heavy fabrication environment Experience with large-scale fabrications, welding processes, or heavy manufacturing flows Practical knowledge of lean tools and continuous improvement methodologies Strong problem-solving skills with a hands-on, shop-floor-led approach Clear communicator able to work across operational and engineering teams SAP or ERP systems experience advantageous (training available) What's on offer: £50,000 per annum 4% employee / 7% employer pension contribution Half-day Fridays Life assurance and enhanced sick pay (increasing with service) Employee Assistance Programme and wellbeing initiatives Long service awards and additional holidays Cycle-to-work scheme, on-site parking, and EV charging Modern, collaborative working environment This is a permanent position with a respected name in defence engineering, delivering highly engineered mechanical and structural systems for demanding military programmes. Data Protection Notice: By applying for this position, you consent to Recruit Engineering processing and storing your personal data, including your CV, contact details, and any other relevant information, for the purpose of providing work-finding services. This consent includes forwarding your details to our clients and storing your information on our recruitment software database. Your consent will last for two years, and you can withdraw it at any time by contacting us in writing or via email

Are you a proactive, hands-on IT Support professional who loves solving problems and delivering exceptional service? We're looking for an IT & Applications Analyst to join our growing team and play a key role in supporting colleagues across the organisation. As our new IT & Applications Analyst, you will: Provide high quality technical support via phone, email, remote tools and in person Troubleshoot hardware, software, application and networking issues Manage and maintain service tickets - ensuring clear updates and timely resolution Support user account administration and basic server related tasks Assist with Microsoft 365, Windows Desktop, and Azure Virtual Desktop (AVD) Support end user devices (PCs, laptops, mobile devices, printers) Contribute to IT projects and team knowledge documentation Join our out‑of‑hours paid overtime rota when requiredIf you possess a combination of some of the following skills, then LETS TALK! Experience in hands on IT support in a professional services environment Experience with: Windows Desktop Microsoft 365 Active Directory user configuration Basic networking (cabling, patching) Excellent problem solving and analytical skills Strong customer service skills - both face‑to‑face and remote Understanding of data protection and confidentiality Experience supporting legal applications (iManage, Proclaim, BigHand) is desirable but not essential. Experience working across multi‑office environments Previous law firm or professional services experience In return, you will be part of a friendly, collaborative IT Service team where your ideas, initiative and growth matter. We value continuous improvement and will support your development into specialist tools and technologies. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

IT SUPPORT ADMINISTRATOR MANCHESTER (Ad hoc travel to Blackburn) UP TO £28,000 + TRAINING & DEVELOPMENT + CAREER PROGRESSION THE OPPORTUNITY: We're recruiting on behalf of a well-established and growing professional services firm with a national presence. With offices across the UK and a strong reputation for delivering high-quality services, they are now seeking an IT Administrator to join their Manchester-based team. This is a fantastic opportunity for an IT professional to work closely with the Head of IT, supporting and maintaining infrastructure across multiple sites. The role offers excellent exposure to a broad range of technologies, systems, and projects, making it ideal for someone looking to develop their technical expertise and progress their IT career. You'll be part of a collaborative and supportive environment where continuous improvement, training, and development are actively encouraged. This would suit someone from an IT Administrator, IT Support Technician, Technical Support Associate, First Line Support Advisor or similar IT Support role looking to progress! THE IT SUPPORT ADMINISTRATOR ROLE: Providing 1st/2nd line support to users across multiple offices (on-site and remote) Maintaining and supporting IT infrastructure including servers, networks, desktops and remote devices Managing and supporting Microsoft 365, Active Directory and Azure environments Installing, configuring and upgrading hardware and software Diagnosing and resolving system and network issues efficiently Supporting IT security, backups and business continuity processes Assisting with IT infrastructure projects and system improvements Liaising with external suppliers to source and implement IT solutions Managing user access, permissions and password resets Supporting mobile device management and remote access systems Maintaining IT hardware including laptops, PCs and printers Delivering user training, support and technical guidance Creating and maintaining IT documentation, policies and procedures Monitoring system performance and identifying areas for improvement THE PERSON: Experience in an IT Administrator, IT Support Technician, Technical Support Associate, First Line Support Advisor or similar IT Support role Strong knowledge of Microsoft technologies including Office 365, Azure and Active Directory Experience supporting Windows environments (Windows 10/11 and Servers) Strong troubleshooting and problem-solving skills Excellent communication skills with the ability to explain technical issues clearly A proactive and organised approach, with the ability to manage multiple tasks A team player with a positive and flexible attitude Full UK driving licence and willingness to travel between sites when requiredBy sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website). Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. We are an equal opportunities employer and we never charge candidates a fee for our services

Desktop Support Engineer, Office365, Google workspace, Desktop , 3 month contact Inside IR35 This role is an onsite role, you will need to go through Enhanced DBS check . Because on this, work visas can not be sponsored Are you passionate about IT support and troubleshooting? Do you enjoy helping users resolve technical issues and ensuring smooth IT operations? This is a fantastic opportunity to join a growing IT support team, where you will play a key role in providing first-class technical support to users across multiple locations. This role is ideal for an IT support professional with experience in mobile and desktop device maintenance, troubleshooting peripherals, and basic networking. If you have strong customer service skills and enjoy working in a dynamic, user-focused environment, we’d love to hear from you! The Role As a Desktop Support Engineer, you will provide on-site and remote IT support, ensuring users receive fast, effective resolutions to their technical issues. You will work as part of a wider IT team, supporting desktop and mobile devices, peripherals, and networks while maintaining high customer service standards. Key Responsibilities Technical Support & Troubleshooting Provide maintenance and support for desktop and mobile devices, including laptops, Chromebooks, and tablets. Diagnose and resolve hardware and software issues for printers, scanners, interactive screens, projectors, and AV equipment. Troubleshoot basic networking issues, including wired and wireless connectivity problems. Assist with image build and deployment for Microsoft and Apple devices. Support users with Microsoft 365 and Google Workspace applications. Customer-Focused IT Support Act as the customer-facing representative for IT support, ensuring users receive fast and efficient service. Assist the service desk team in delivering high-quality IT support, escalating issues when necessary. Provide clear technical guidance to users, many of whom may not have IT backgrounds. Maintain accurate records of service requests in the IT ticketing system. Collaboration & Best Practices Work effectively with remote IT teams, ensuring smooth communication and problem resolution. Support the implementation of ITIL best practices to improve IT service delivery. Contribute to continuous improvement initiatives, identifying ways to enhance IT support efficiency. What We're Looking For Technical Skills & Experience: Experience supporting desktop & mobile devices (laptops, tablets, Chromebooks). Knowledge of peripheral support, including printing, scanning, AV equipment, and interactive screens. Basic understanding of wired and wireless networking. Familiarity with image deployment tools for Microsoft and Apple devices. Operational knowledge of Microsoft 365 and Google Workspace. IT qualifications equivalent to CompTIA A+ or similar. Experience using IT service desk ticketing systems (e.g., ServiceNow) is an advantage. Soft Skills & Behaviours: Excellent customer service skills with a proactive, problem-solving approach. Strong communication skills, both verbal and written. Ability to prioritise workloads and work under pressure. Strong troubleshooting abilities, knowing when to research issues or escalate problems. Ability to build strong working relationships with remote teams and users. All our roles are UK based. When submitting your application to Colossus, please ensure the following Your CV has your address and postcode. You also have your correct phone number and email address so we can contact you asap regarding your application

Content Marketing Executive | EdTech | Hybrid (Manchester) | £35,000 – £40,000 A fast-growing EdTech company based in Manchester is looking for a Content Marketing Executive to join its expanding marketing team. This is a hands-on role where you’ll create high-quality content that drives brand engagement, supports lead generation, and increases web and online visibility across multiple digital channels. The ideal candidate will have 2–3 years’ experience in a content-focused marketing role (e.g. Marketing Executive, Content Marketer, Copywriter, SEO/Content Executive) and be keen to develop their career within B2B digital marketing. Role Responsibilities Create and optimise high-quality content, including blog articles, email campaigns, website pages, social posts and adverts, ensuring consistent tone of voice and messaging. Support SEO performance through keyword research, content optimisation and on-page best practices to drive organic traffic growth. Collaborate with internal marketing and design teams to produce content and visuals aligned with campaign and business objectives. Develop content that drives engagement, lead generation and brand loyalty using compelling storytelling and audience insight. Localise content for US audiences while maintaining consistent brand messaging. Apply audience insights and marketing psychology to shape messaging and content strategy. Monitor and analyse content performance, using data to identify opportunities for improvement. Use AI and modern marketing tools to improve efficiency and stay up to date with industry trends. Requirements Proven experience in content marketing or a similar role (e.g. Marketing Executive, Content Marketer, Copywriter). Degree in Marketing, English, Psychology or equivalent industry experience. Strong writing and editing skills, with examples of high-quality content. Interest in developing SEO and organic marketing expertise. Familiarity with AI tools for content creation and optimisation is desirable. Benefits £35,000–£40,000 salary, depending on experience. Hybrid working: Monday and Friday from home, Tuesday–Thursday in Manchester. Flexible working hours (7.5-hour day, early start available) 23 days holiday plus bank holidays. Inclusive, collaborative and supportive company culture. Eligibility for an EMI share options scheme. If you’re looking to grow your content marketing career within an innovative EdTech business, apply today

The Role... At Soho House, a Senior Chef de Partie supports the kitchen brigade in delivering exceptional dining experiences to our members and guests. Y ou will be instrumental in preparing, cooking, and presenting exceptional dishes in line with the club's food philosophy. Y our main responsibility is to demonstrate technical expertise , a strong understanding of kitchen operations, and a proactive attitude towards training, hygiene, and consistency. You will contribute to menu development, ensure compliance with allergy procedures and dietary requirements, and act as a role model to more junior kitchen staff. . What's in it for you? Weekly Pay Team meal whilst on shift prepared by our chefs Soho Friends Membership 50% Team discount on Food & Drink, 7 days a week Staff Room Rates Health Cash Plan (option to up to 2 additional dependents) Dental Plan (option to add up to 2 additional dependents) Birthday Day Off after 1 years' continuous service Up to 50% Staff Discount on Cowshed & Soho Home In conjunction with Soho Impact, take 2 days paid a year to support a charity of your choice. Free Counselling Sessions Cookhouse & House Tonic: Our Cookhouse & Tonic Programmes offer unique food and drink training, events and opportunities to inspire and educate. Continuous training to develop yourself personally and professionally Team Events: From fitness sessions to cinema screenings and art classes, each month we hold a series of fun events which you can sign up to. Soho House offers competitive compensation packages that feature global benefits and perks. Whether you're seeking entry-level employment or a new opportunity to expand your profession, we offer training to develop the technical and managerial skills necessary to enhance your career Key duties... Prepare, cook, and present dishes within your section to the highest standards in quality, consistency, and presentation. Support the Sous Chef and Head Chef in delivering efficient and well-organized service during busy periods and events. Ensure full compliance with all food safety, allergy, hygiene, and health standards, including HACCP and company policies. Take ownership of mise en place and prep tasks, ensuring all elements are ready and of high quality for service. Assist in the training and mentoring of Commis Chefs and Demi Chefs de Partie, helping to develop their technical skills and kitchen knowledge. Attending regular meetings with front and back of house teams to learn about any menu or service changes and specials alongside daily tastings. Assist in preparation of team meals as requested, considering dietary needs and variety. Demonstrate a proactive attitude towards learning, improvement, and teamwork. Supporting with the deep cleaning of the entire kitchen before close. Wrapping unused items and storing them in proper area at the end of service. What we are looking for... A successful Senior Chef de Partie for Soho House will ideally have up to 2 years' experience in a busy high-profile venue and a natural flair for first class service. You'll be reliable, friendly and happy to be a key part of the team that strives for success. Minimum of 2+ years' experience in similar capacity Passion for food, attention to detail, and a strong desire to learn and grow. Understanding of basic food safety and hygiene practices. Good communication and teamwork skills. Positive, proactive, and respectful attitude in a busy kitchen environment. Culinary qualification (e.g., NVQ Level 1 or 2) is a plus but not essential. Must be able to demonstrate competency as outlined in the training schedule and Club School Must be able to work flexible shifts and schedules, including weekends and holidays as needed Ability to take direction, work in a team environment and autonomously The salary range for this role if filled within the UK is listed below. The range for the position in different geographies may vary based on market differences. Pay Range £17 - £17 GBP TPBN1_UKCT

We are excited to offer a fantastic opportunity for a permanent Assurance Manager to join our Highways Technology Services business, which includes Street Lighting, Electric Vehicle Charging Infrastructure and Highways Technologies. This role will be a national role based at one of our existing contracts, which includes Manchester, Wakefield and Walsall. You will be required to travel between depots across the UK - a Company Car will be provided. The standard hours of work are 40 per week, Monday - Friday. In this role, you will support the Highways Technology Services business, by providing effective solutions to maintain ongoing assurance for operating policies, processes and standards that the business follows. This will be done by actively taking part in audits and other surveillance visits both internally and externally when needed, tracking, and reporting on performance to ensure consistent assurance across the business. Ultimately this role will help the business in enhancing excellence to assure client satisfaction, reduce risk, increase efficiency, and build a reputation for delivering high quality services. What you'll do: Ensure that the operational business is properly implementing the Amey model, and the standards to which the business subscribes providing support to Health, Safety, Environmental management and quality assurance personnel as required. Stay abreast of developments in legislation, regulation, and industry best practice through an ongoing process of formal continuing professional development. Develop briefing on relevant topics and procedures to enable information to be cascaded throughout the business by key stakeholders. Under direction from the Business Partner, develop audit schedules and undertake surveillance visits of areas under the scope of employment. Support incident investigations identify and, using specialist technical knowledge, to advise on the implementation of effective preventive actions through a process of root cause analysis. Take ownership of the Amey online reporting tool, EcoOnine, overseeing action closures to the required quality and standard, and formally challenging overdue items. Under direction of the Business Partner, take ownership of Amey policy, procedure and guidance documents, ensuring document owners maintain life cycle document reviews as necessary to reflect current obligations and best working practices, legal and regulatory requirements. Support the Business Partner to review Amey management systems, processes and procedures; and support the business in the implementation of risk control arrangements using specialist technical knowledge where necessary. Under direction from the Business Partner, support Work Winning activities by ensuring that Business Unit bidding teams incorporate Amey's strategy and approach to managing environmental compliance into bid submissions. Provide guidance, advice and support to management teams to ensure that mobilisations and demobilisation take place in compliance with Amey's stated requirements. Continually uphold Amey's core value of 'safety first, always', by complying with and promoting our robust safety measures to minimise the risk of injury or ill health by consistently applying and working within our Zero Code framework whilst undertaking activities for or on behalf of Amey. Undertake site visits and engage with all employees as necessary on a regular basis, supporting them to work effectively. Why Join Us? At Amey, we don't just offer jobs, we offer opportunities to build fulfilling careers. As one of the top 1% of employers recognised by Investors in People, we are committed to your professional growth and wellbeing. Here's what you can expect when you join our team: ® Competitive Salary: Enjoy a competitive annual salary with the potential for yearly reviews to ensure you're rewarded for your contributions. ® Career Growth: Propel your career with clear, dynamic advancement opportunities to roles like a Highways Team Leader and Supervisor ® Training Opportunities: Unlock your potential with comprehensive training, including fully funded HGV licence training, tailored to your growth. ® Personal Development Opportunities: Advance your personal growth through mentorship and access to our award-winning programs like our Leadership Development, (email address removed), and Multicultural Leadership programs. ® Pension: Benefit from a generous pension scheme with company contributions for your future peace of mind. ® Holidays: Enjoy at least 24 days of holiday plus bank holidays, and the opportunity to buy further 5 days! Giving you plenty of time to relax and recharge. ® Flexible Benefits: Customise your benefits package with options like additional leave, cycle-to-work schemes, charitable giving, and gym memberships. ® Exclusive Discounts: Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter. ® Social Impact: Take part in our community initiatives with 2x paid volunteering days a year, plus other opportunities to support fundraising and local projects. What you'll bring: Entry level qualification to the CQI or IOSH and can demonstrate they are working towards an advanced level of membership. Previously experience of working on a Street Lighting / Highways contract (desirable) Ability to define Assurance standards which are pertinent to the business. Able to plan for assurance, inclusive of processes and resources required to achieve best in class assurance needs. The ability to monitor and assess assurance controls in place inclusive of any deviation from defined standards or regulatory requirements. Competence in implementing continual improvement opportunities through, review, engagement and collaboration with key stakeholders within the business to prevent future defects or issues. The ability to train and educate employees to ensure they have the necessary skills and competence to ensure assurance within the business. An engaging communication and influencing style able to work with all levels of the business. If you're ready to make a meaningful impact on our business and contribute to a shared, sustainable future, we invite you to join us in advancing our strategy and driving positive change. Application Guidance At Amey, we value a culture of diversity and inclusion. We encourage applications from individuals who are passionate about making a positive impact, no matter their background, gender, race, or personal circumstances. We believe everyone deserves the opportunity to shine. As a Disability Confident leader, we're proud to offer applicants with a disability an interview if they meet the minimum requirements for the role. If you have any questions or need any adjustments during the recruitment process, don't hesitate to reach out to our recruiter for this role, at (url removed) #CVL #LI-JP1

Manchester HQ Who are Flow Student ? Flow Student is the new brand created by MCR Property Group to operate its considerable and growing student accommodation portfolio. MCR is dynamic and fast-growing property investment and development company with offices in Glasgow, Manchester, Birmingham, and London. The business continues to expand rapidly across the UK and is seeking high-calibre, hands-on professionals who thrive in a fast-paced environment and want to grow with the organisation. MCR offers a strong remuneration package and the opportunity to play a meaningful role in shaping our student portfolio into a large and evolving property platform. MCRs Student Portfolio, now operational under the Flow Student brand has over 4,000 beds already and expects to expand to 10,000 in the next 12 months. Who we are looking for? MCR is now seeking a Financial Director to play a key role in ensuring the ongoing financial stability, control, and operational excellence of the Group. This is a senior leadership position heading up our finance function, responsible for maintaining robust financial controls, ensuring full compliance with relevant regulation and reporting standards, and overseeing the smooth running of day-to-day financial operations. The role will also involve leading, developing, and motivating a diverse team of finance professionals and acting as a visible figurehead for financial excellence across the organisation. The successful candidate will lead an efficient, high-quality, and service-driven transaction function covering our student portfolio financial operations, including sales ledger, purchase ledger, credit control, and banking activity. You will be responsible for ensuring strong technical capability and rigour across the team and will take ownership of the month-end and year-end close processes. A core element of the role will be the design, documentation, and continuous development of robust financial controls and governance frameworks that are operationally suitable for a complex and expanding business. You will embed a strong culture of compliance and control across both the finance team and the wider business, maintaining and developing financial regulations that reflect the structure and scale of the organisation. You will lead the planning, preparation, and delivery of the Companies annual statutory accounts, ensuring accuracy, consistency, and timeliness throughout the process. You will also manage relationships with internal systems providers, and where applicable internal audit partners, ensuring a high standard of assurance, quality, and professional collaboration. Beyond technical delivery, you will play a central role in building a culture of continuous improvement within the finance function, measuring performance, monitoring standards, and taking responsibility for the overall quality and reliability of the teams output. You will contribute to leadership activity across our growing student portfolio, championing best practice within finance and supporting senior stakeholders with high-quality financial reporting, analysis, and insight. You will also be expected to identify and improve manual processes where appropriate and to help maintain efficient, scalable financial systems as the business continues to grow. About you Applicants must be fully qualified accountants, holding ACA, ACCA, CIMA, or equivalent professional qualifications. Previous experience within the wider property sector would be highly advantageous, although candidates from other sectors with the ability to adapt quickly to a complex and regulated environment will also be considered. You will demonstrate excellent written and verbal communication skills, strong attention to detail, and the ability to present financial information clearly to both finance and non-finance stakeholders. Outstanding time management and organisational skills are essential, along with the confidence to operate effectively in a senior leadership capacity. Please note that this role is office-based or site-based depending on operational requirements, and MCR does not offer hybrid or remote working TPBN1_UKTJ

Full stack Senior & Lead Software Engineer Hybrid | Full time | Manchester £50,000-£90,000 Overview We are hiring across both Senior and Lead Full Stack Software Engineer levels to join high-performing engineering teams delivering complex digital transformation programmes across public sector projects. These roles offer the opportunity to work on large-scale, cloud-based systems where you will help shape architecture, lead delivery, and build services that have real-world impact. Both roles are hands-on engineering positions, with increasing levels of technical ownership, leadership, and architectural responsibility depending on level. Senior vs Lead Senior Software Engineer Own delivery of key services or components across the full lifecycle Contribute to architecture and design within a wider technical team Build and deliver scalable cloud-based applications Support planning, estimation, and technical problem solving Mentor junior engineers and contribute to team capability Strong hands-on engineering focus with growing technical leadership Lead Software Engineer Own end-to-end architecture and delivery of complex services or systems Define technical direction and engineering standards Take accountability for system design, scalability, security, and performance Lead technical decision-making across teams or workstreams Provide technical assurance and guide engineering delivery quality Engage with stakeholders on technical solutions and strategy Core Responsibilities (Both Levels) Design and deliver scalable, secure cloud-based systems Work across .NET, Java, Python, Node.js, and modern JavaScript frameworks Build microservices and serverless architectures Implement and improve CI/CD pipelines Work in Agile environments (Scrum, Kanban, TDD) Support continuous improvement of engineering standards Mentor and support engineers across the team Contribute to planning, estimation, and risk management About You Essential Experience Strong Full Stack Engineering background (5+ years) Experience delivering complex, scalable digital services Cloud experience Strong understanding of microservices and modern architecture patterns Experience working in Agile delivery environments Strong communication and stakeholder engagement skills CI/CD experience (Jenkins, Terraform) Experience mentoring or leading others (level dependent)

Operations & Onboarding Manager- Greater Manchester- Office Based PLEASE NOTE THIS IS A TECHNICAL ROLE: A background in utilities or energy would be preferable. My client, a market leader in their sector are seeking an experienced Operations & Onboarding Manager to join a very dynamic and busy team to drive the smooth running of business operations while ensuring seamless onboarding experiences for all new clients. This is a hands-on leadership role where you will shape operational strategies, optimise processes, and deliver outstanding service across all touchpoints. Key Responsibilities: Operations Lead and manage day-to-day operations (no staff management required at this stage) Develop and implement operational strategies that drive efficiency, compliance, and business success. Design and refine processes to meet company objectives and ensure quality excellence. Monitor and report on KPIs, operational performance, and system improvements. Manage internal and external stakeholder relationships, integrating their needs into operational planning. Use data and analytics to make informed decisions and enhance operational effectiveness. Collaborate with cross-functional teams such as sales, finance, and marketing to ensure seamless business operations. Ensure consistent, high-quality service delivery to customers at every stage. Allocate resources effectively, including budget management and workforce planning. Stay up-to-date on industry best practices, regulations, and trends to maintain compliance and operational excellence. Key Responsibilities – Onboarding Oversee the end-to-end onboarding of new clients and additional services for existing clients. Set clear milestones and deliverables to ensure smooth onboarding experiences. Collect, audit, and verify accurate data for integration with business systems. Work closely with internal teams and technical partners to implement new systems or services. Manage welcome communications and ensure clients understand service levels. Oversee the handover from onboarding to operations and monitor early processes for smooth transitions. Build strong relationships with clients through clear communication and proactive support. Qualifications & Skills Strong background in Business Administration or a related field. Minimum of 5 years’ experience in operations/business management, preferably with exposure to service delivery or client-focused industries. Excellent communication and interpersonal skills for internal and external stakeholder engagement. Strong analytical skills with experience using data to drive decisions. Solid experience in operational management, project management, and system/database oversight. Exceptional organisational skills with the ability to manage multiple priorities simultaneously. Strategic thinking with strong problem-solving capabilities. Passionate about delivering excellent customer service and driving continuous improvement. Demonstrated experience in improving processes, achieving cost efficiencies, and enhancing operational performance. Experience Operational/business/project management, financial oversight, budgeting, and resource allocation. Salary Competitive circa £50k per annum plus annual bonus, dependent on experience and qualifications. My client is committed to creating a supportive and engaging workplace where you can thrive. If you are a strategic, results-driven professional with a passion for operational excellence and client success, this is an exciting opportunity to make a real impact. Salary & Benefits Salary: Circa £50,000 per annum Holiday: 25 days plus 8 bank holidays Bonus: Annual performance-based bonus Working hours: Office-based, Monday to Thursday, 9:00am – 5:30pm and Friday 5pm This employer is committed to creating a supportive and engaging workplace where you can thrive. If you are a strategic, results-driven professional with a passion for operational excellence and client success, this is an exciting opportunity to make a real impact. APPLY NOW Send your up to date CV with salary expectation and notice period to (url removed) or call me on (phone number removed), speak soon, Victoria :)

Job Title: Digital Merchandising Executive Reports to: Marketing and Communications Lead Location: Office-based in our Manchester Support Centre in Chadderton Salary: £27,000 - £33,000 per year (Dependent on Experience) Digital First Mindset As our Digital Merchandiser, you'll play a pivotal role working with LWC’s online catalogue of 10,000 products to ensure the accurate and timely setup of products, variants, collections, and promotional activity, ensuring all content is good quality, complete, consistent, and optimised for conversion, utilising Product Information Management (PIM) software. Working closely with the wider commercial and buying teams, the Digital Merchandising Executive supports the execution of the trading and marketing plans by maintaining exceptional product data standards and ensuring a seamless on-site journey. A strong attention to detail, a customer-first mindset, and a commitment to operational excellence are essential to maintaining a reliable and engaging digital experience. The ideal candidate will be enthusiastic about what they do, with a passion for drinks, and be familiar with Product Information Management platforms like Pimberly. Responsibilities: • Liaising with the buying teams and external brand owners to ensure quality, up-to-date copy and digital assets are available for new and existing products. • Being responsible for checking online-related product data for new products entering the business, and signing off to go live on our digital channels. • Populating product data into the Pimberly Product Information Management (PIM) system and online platforms. • Conducting product data audits and cleansing existing product data, liaising with other teams where appropriate. • Investigating queries relating to product data inconsistencies or missing information. • Using Adobe Photoshop to lightly edit product imagery (cropping, resizing, removing shadowing, etc) and produce online imagery for promotional codes. • Optimise site navigation, taxonomy, and category pages to improve product discoverability and user experience. • Ensuring product data is displayed effectively across all online platforms, optimised for customers and SEO, and suggesting areas for improvement. • Handling volumes of product data for reporting, importing and exporting via Excel. • Managing the digital mailbox and providing admin support to the Marcomms team. • Create and publish supporting content such as blogs and guides to enhance campaigns, education, and SEO for the LWC website. • Assisting in the execution of ad-hoc projects within the business. What We’re Looking For: • Strong literacy, communication skills, and attention to detail. • Competent with Excel (vlookup and IF formulae) and other IT systems. • Experience in a similar online Merchandising or e-commerce role. • Experience with basic image editing. • Experience with a PIM system and e-commerce software. What We Offer • Competitive salary (depending on experience). • Additional 10% annual bonus. • Opportunities to attend trade shows, portfolio tastings, and industry events. • Staff discount on our drinks portfolio. • Ongoing professional development in a fast-paced, growing business. About LWC LWC Drinks is the UK’s largest independent drinks wholesaler. With 18 depots nationwide and over 45 years of experience, we supply the on-trade with one of the most comprehensive drinks portfolios in the industry. From award-winning wines and craft spirits to draught beer and soft drinks, we pride ourselves on service, expertise, and partnerships that help our customers succeed. Currently, LWC Drinks employs over 1,800 people across our depots and in our Support Centre based in Manchester, where the Marketing and Communications team is based. Marketing at LWC is fast-paced, with fantastic opportunities to be creative and innovative across the LWC corporate brand, our award-winning Signature Brands and Wine portfolios, and the LWC-owned Dorbiere Pub Group

Kinetic recruitment are working with a well-established business in Dukinfield who are looking to bring in a Quality & Control Manager to join their team. This role is key to making sure products meet the right standards, processes are running properly, and everything stays compliant with ISO requirements. You'll also be supporting the business as they continue working towards ISO 18001 and ISO 45001. It's a hands-on role where you'll be involved on the shop floor as well as managing systems and processes. This is a permanent position working Monday to Friday 08:30 -16:30 Salary: £45,000 per annum What you'll be doing * Overseeing day-to-day quality across all operations * Managing and improving the ISO 9001 Quality Management System * Supporting the HSQE Manager with ISO 18001 and ISO 45001 accreditation * Leading internal audits and dealing with non-conformances * Driving corrective and preventative actions * Monitoring quality KPIs and looking at ways to improve processes * Training and supporting production teams on quality standards * Dealing with customer quality issues and supplier concerns What we're looking for * Experience in a quality role within manufacturing * Strong knowledge of ISO 9001 * Some exposure to ISO 18001 / ISO 45001 * Experience with audits, root cause analysis, and continuous improvement * Good communication skills - both written and verbal What's in it for you? * £45,000 salary * Stable Monday to Friday hours with an early finish * Permanent role with a well-established business * A hands-on position where you can really make an impact * Opportunity to be involved in continuous improvement and ISO development * Supportive team environment Kinetic PLC is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing, and technical industries. All applications are handled in the strictest confidence. Those not meeting the full criteria may not be contacted, but CVs will be retained for future roles

CNC Miller – 2 Shift System – MAZAK / FANUC – 3, 4 & 5 Axis – Permanent – Greater Manchester CNC Miller required for a permanent 2-shift role with a market-leading engineering company. Our client is a genuine industry leader with a global client base and an expanding order book. Due to growth, they have opened new sites around Greater Manchester and are looking for experienced CNC Millers to join their team. This role provides excellent training, exposure to multiple control systems, and a full benefits package. Key Responsibilities – CNC Miller * Edit, set up, and operate CNC milling machines using MAZAK or FANUC controls * Work on 3, 4, and 5 axis milling machines * Inspect and measure components to ensure engineering specifications and tolerances are met * Read and interpret engineering drawings accurately * Maintain a safe, clean, and organised workspace * Contribute to continuous improvement initiatives in quality, safety, and productivity * Participate in overtime when required Candidate Requirements * Time-served CNC Miller with apprentice training in CNC machining * Experience with 3, 4, and 5 axis milling machines ideally * Able to work on a 2-shift system: * Mon – Fri: 06:00 – 14:00 * Alternative shift: Mon – Thurs: 13:45 – 22:25, Fri: 13:00 finish * Able to provide 2 work references and a solid work history * Reliable, punctual, and quality-focused Hours, Pay & Benefits * 2-shift system with flexible scheduling * Salary dependent on experience, assessed individually based on skill set * Overtime opportunities available * Comprehensive training on multiple CNC control systems * Extensive benefits package How to Apply To apply for this CNC Miller 2-shift role, please submit your CV in Word format highlighting your CNC milling experience and shift availability

A leading engineering organisation is seeking a Manufacturing Automation Engineer to support the implementation of advanced automated welding and assembly systems. With significant investment in capital equipment and technology, this role will play a key part in modernising production through robotics, automation, and process optimisation within a complex manufacturing environment. This role is ideal for an Automation Engineer with strong experience in robotics and PLC-controlled systems who enjoys delivering tangible improvements on the shop floor. It suits someone who thrives on introducing new technology, leading automation projects, and working cross-functionally to drive efficiency, quality, and innovation in manufacturing processes. Key Responsibilities Identify and deliver automation opportunities across manufacturing operations. Lead installation, commissioning, and integration of robotic and automated systems Develop and optimise robot programs and PLC-controlled processes. Conduct cost-benefit analysis and support capital investment decisions. Drive continuous improvement using data analysis and Lean methodologies. The company has offered a great package for the role, including a salary of £50,000-£55,000. In additional to this, the company also offer 7% pension contributions, Life Assurance, Sick Pay and a generous 25 days annual leave +8 bank holidays. If you are interested in helping to implement a significant round of investment, click apply, send an update CV to or give Conor a call on 0161 839 5353. TPBN1_UKTJ

Purpose The Technical Estimator is responsible for reviewing and pricing enquiries throughout the pre-construction process, from initial enquiry to project handover. This includes developing a clear understanding of project scope and specifications, coordinating supplier engagement, managing commercial costings, and ensuring all information is accurately captured, reviewed, and communicated. This role plays a key part in ensuring all technical, commercial, and programme-related aspects of a project are fully considered, with clear documentation and alignment across pre-construction, commercial, and delivery teams. Key Responsibilities Review enquiry documents and project scope Produce scope reviews for Pre-Construction Manager sign-off Create and manage RFI, RFQ, and derogation schedules Raise and manage specification and scope clarifications Identify gross profit (GP) opportunities within enquiries Manage supplier communication and review supplier quotations Input and manage project costings within commercial costing sheets Price access, delivery, and installation using automated costing tools Complete Major Works Proposal documentation Present costings at internal review meetings Manage post-tender queries and revised quotations Support business development with scope reviews when required Prepare handover packs including all pricing and decision documentation Complete specification and scope checklists prior to handover Price design variations, add/omits, and scope changes Obtain multiple subcontractor quotations for installation works Prepare GP lock-in and pricing breakdown packs for delivery teams What Good Looks Like (6-Month Outlook) 1. Enquiry & Scope Management Confidently reviews enquiry documents and fully understands project scope and requirements Produces clear and accurate scope reviews for approval Identifies and raises key clarifications early, reducing risk and ambiguity Demonstrates strong understanding of technical specifications (e.g. door ratings and system requirements) 2. RFI, RFQ & Derogation Control Creates and proactively manages RFI, RFQ, and derogation schedules across live enquiries Ensures all queries are tracked, issued, and closed out in a timely manner Maintains visibility of outstanding items and escalates risks where required 3. Supply Chain & Quotation Management Engages suppliers efficiently and manages RFQs proactively Responds promptly to supplier queries to maintain programme timelines Reviews supplier quotations thoroughly for specification, scope, and pricing accuracy Identifies and challenges discrepancies between requested scope and supplier returns 4. Commercial & Cost Management Accurately inputs and manages project costings within commercial systems Confidently prices access, delivery, and installation using automated tools Secures a minimum of three competitive subcontractor quotations per project Prices variations, add/omits, and scope changes accurately 5. GP Awareness & Commercial Performance Proactively identifies and communicates GP opportunities Demonstrates strong commercial awareness across scope, pricing, and strategy Contributes to margin improvement through supplier engagement and scope challenge 6. Proposal, Client & Internal Communication Produces high-quality Major Works Proposals with all required documentation Presents costings clearly at internal review meetings Manages post-tender queries and revised quotations effectively Supports business development with timely and accurate scope reviews 7. Handover & Delivery Support Delivers clear, structured handover packs upon project award Documents assumptions, decisions, and pricing strategies Completes all specification and scope checklists prior to handover Prepares GP lock-in packs and detailed pricing breakdowns Ensures delivery teams receive all required information for successful execution Key Behaviours Quick Learner & Technically Capable – Rapidly develops strong understanding of technical specifications and applies knowledge effectively Flexible & Responsive – Able to respond to urgent requests when required Problem-Solver – Approaches challenges with a solutions-focused mindset Detail-Oriented – Maintains high accuracy and ensures no details are missed Professional Under Pressure – Remains calm and effective under tight deadlines Kind & Considerate – Demonstrates respect, patience, and positive intent Commercially Aware – Actively seeks opportunities to improve profitability Strong Communicator – Clearly conveys technical and commercial information to stakeholders Additional Information This scorecard is not exhaustive and may evolve in line with changing business needs. The role requires flexibility and responsiveness to shifting priorities, and responsibilities may be adjusted to align with organisational objectives

Quality Engineer (NPI / Programme-Based) Salary: £36,000 - £40,000 + Bi-Annual Performance Bonus The Opportunity Winsearch are working in partnership with a well-established and growing aerospace / defence manufacturer to recruit a Quality Engineer to support New Product Introduction (NPI) and programme-based activity. This is an excellent opportunity for a Quality Engineer who enjoys working in a fast-paced, technically challenging environment, where you will play a key role in ensuring new products are introduced efficiently, compliantly, and right first time. You will work closely with Engineering, Production and Programmes teams, supporting the full lifecycle from concept through to production, ensuring all quality standards are achieved within a highly regulated environment. Key Responsibilities • Support NPI and programme activity, ensuring quality requirements are embedded from initial concept through to production, • Review engineering drawings, specifications and customer requirements to ensure full compliance, • Conduct and support First Article Inspection Reports (FAIR) and associated documentation, • Raise and manage non-conformances, supporting MRB activity and driving corrective actions, • Manage concession requests and liaise with customers where required, • Support APQP / PPAP processes and documentation, • Carry out and support inspection activities using a range of methods (manual, Keyence, CMM), • Work closely with Manufacturing and Engineering teams to ensure robust processes are implemented, • Drive continuous improvement activities, identifying waste and improving efficiency, • Ensure adherence to QMS / IMS systems and aerospace / defence standards, • Support internal and external audits where required What We're Looking For • Minimum 3 years' experience in a Quality Engineer role within a manufacturing environment, • Ideally time-served from an inspection background, • Strong ability to read and interpret engineering drawings and specifications, • Experience working within aerospace, defence or other highly regulated industries, • Good understanding of manufacturing processes from raw material through to finished product, • Experience with: FAIR / First Article Inspection Non-conformance and MRB processes Concessions APQP / PPAP QMS / IMS systems - Hands-on experience with inspection equipment (manual tools, Keyence, CMM) Personal Attributes • Strong problem-solving ability with a pragmatic, solutions-focused approach, • Confident decision maker with the ability to work independently, • Continuous improvement mindset with a focus on waste elimination, • Excellent communication skills, able to engage at all levels, • Highly organised with strong attention to detail What's on Offer • Competitive salary (£36,000 - £40,000 DOE), • Performance bonus paid every six months, • Opportunity to work on cutting-edge aerospace / defence programmes, • Stable and growing business with long-term contracts, • Supportive team environment with real scope for development INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Are you a recent graduate or graduating this year and ready to kick-start your career in a fast-paced manufacturing environment? Do you have a passion for process optimization, innovation and continuous improvement? Join us at Northwood Tissue Ltd, a leader in sustainable tissue production, as a Graduate Trainee supporting key projects to improve efficiency, productivity, and operational excellence. At Northwood Tissue we manufacture high-quality tissue products used every day in homes and businesses across the country. We’re committed to sustainability, innovation, and continuous improvement. As we grow, we’re looking for ambitious graduates to grow with us. About the RoleAs a Graduate Trainee, you will work alongside experienced engineers and production leaders to support and deliver initiatives that drive improvements across our manufacturing operations. This is a hands-on role where you'll learn from the ground up and gain exposure to all aspects of tissue production. Key Responsibilities: Assist in the analysis and optimization of manufacturing processes Support projects in implementing process improvement initiatives Monitor and report on production efficiency and quality metrics Contribute to problem-solving activities to reduce waste, downtime, and costs Collaborate with cross-functional teams including production, maintenance, and quality Requirements We welcome enthusiastic and driven individuals who are eager to learn and make a real impact. Requirements: A degree in Chemistry, Chemical Engineering, (or related discipline). 2.1 or a first class degree is required. Strong analytical and problem-solving skills Excellent communication and teamwork abilities A proactive attitude and willingness to take on challenges Knowledge of manufacturing or process environments (preferred but not essential)

Design and deliver the infrastructure that keeps communities moving. Join a high-performing engineering team working on complex highways and drainage projects across the North West and beyond. Purpose & Scope of the Role As a Highway/Civil Engineer, you will play a key role in the design and delivery of highways and drainage infrastructure across a wide range of development and public sector projects. Working within a multidisciplinary team, you will contribute to integrated, technically robust solutions across residential, commercial and major infrastructure schemes. You will take ownership of projects from design through to delivery, acting as a key point of contact for clients and stakeholders. The role involves leading the design of highway and drainage schemes (including S278, S38, S104 and S185), ensuring compliance with relevant standards such as DMRB, Sewers for Adoption and local authority requirements. Your Impact in this Position You will drive the successful delivery of infrastructure projects by applying strong technical expertise and a proactive approach to problem-solving. Your ability to manage projects independently, produce high-quality designs, and engage effectively with clients and statutory authorities will be critical to project success. By contributing to technical assurance, mentoring colleagues and supporting continuous improvement, you will strengthen team capability while delivering solutions that meet both client and regulatory expectations. Core Capabilities Highway & Drainage Design Expertise Deliver detailed design for highways and drainage, including SuDS and development infrastructure Produce calculations, specifications and technical reports to industry standards Project Delivery & Ownership Manage projects independently from concept through to completion Lead delivery of S278, S38, S104 and related schemes Standards, Compliance & Governance Ensure designs meet DMRB, Building Regulations and local authority requirements Engage effectively with statutory bodies and approval processes Commercial & Risk Management Support commercial performance through effective project and change management Contribute to quality assurance and risk mitigation activities Collaboration & Team Development Work closely with multidisciplinary teams and stakeholders Mentor and support junior engineers, promoting best practice Skills, Experience & Qualifications Degree-qualified in Civil Engineering or equivalent, with progression towards chartership (CEng MICE/CIHT). Strong experience in highways and drainage design, including SuDS and development infrastructure. Proficient in AutoCAD, Civil 3D (or Site 3D/PDS) and MicroDrainage. Good understanding of statutory approvals, commercial awareness, and strong communication skills. Full UK driving licence required. Working Environment This role offers flexible working across the North West, with access to offices in Manchester, Liverpool, Leeds and Cumbria. A hybrid model is supported, typically combining office and remote working, with office attendance based on project and team needs. Travel to project sites may be required, and flexible working arrangements are available. About Tetra Tech Tetra Tech is a leading provider of consulting and engineering services working across the full project lifecycle worldwide.We have a wide range ofexpertiseacross our teams, providing a global support network with a personalised approach to client relationships to better understand where we can add value.We provide a collaborative environment that supports individual performance, innovation, and creativity. We support public and private sector clients on local, national, and international projects to deliver sustainable and resilient solutions. Our operations in the UK, Ireland, and the Netherlands include more than 6,000 employees who are Leading with Science to solve our clients most complex problems. In alignment with the Equality Act 2010, we will make reasonable adjustments to support candidates and employeesrequiringadditionalarrangements. This could include adaptations to work schedules, training approaches, or the physical workspace. Please inform us if you need any accommodations during the recruitment process or in your day-to-day role TPBN1_UKTJ

Finance & Accounts Manager Proactive Personnel are recruiting on behalf of a well-established leading supplier of multifunction devices and telecom solutions. Our client has a turnover of £3 million; they are a trusted partner for businesses seeking high-quality technology solutions to enhance their operational efficiency. The successful candidate will play a pivotal role in guiding financial strategy, ensuring compliance with all relevant financial regulations, and providing insightful analysis to inform our business decisions. This role is crucial for our continued expansion and success, as we aim to leverage our strong market position to achieve new heights. Hours: Mon-Fri | 8:30am – 5:30pm – 45 minutes lunch break & 2 15-minute breaks Salary: £40,000 per annum DOE. Key Responsibilities include but not limited to: • Lead and manage the day-to-day finance function, ensuring accuracy and efficiency across all processes, • Oversee preparation of monthly management accounts, financial reports, and forecasts, • Manage cash flow, budgeting, and financial planning to support business growth, • Manage payroll for a staff of around 30, • Ensure compliance with statutory requirements, tax regulations, and internal controls, • Own and optimise financial systems, particularly Xero, ensuring best practice usage, • Manage and improve payment collection processes, including integration and use of GoCardless, • Partner with senior leadership to provide financial insights and strategic recommendations, • Monitor KPIs specific to the managed print sector (e.g., cost-per-page, contract profitability, service margins), • Lead, mentor, and develop the finance team, fostering a high-performance culture, • Drive continuous improvement in financial processes and reporting Ideal Candidate Essential Criteria: • Proven experience in a Finance Manager or similar senior finance role, • Strong working knowledge of Xero (essential), • Experience managing direct debit/payment platforms such as GoCardless, • Excellent understanding of financial reporting, forecasting, and cash flow management, • Strong leadership skills with the ability to motivate, coach, and inspire a team, • High level of attention to detail and organisational skills, • Advanced Excel and financial analysis capability Desirable: • Experience within the managed print services, technology, or B2B service sector, • Knowledge of recurring revenue models and contract-based billing, • Professional qualification (ACCA, CIMA, ACA or equivalent), • Experience implementing or improving finance systems and processes Key Competencies: • Leadership & Team Development, • Strategic Thinking, • Commercial Awareness, • Problem Solving & Decision Making, • Communication & Stakeholder Management, • Continuous Improvement Mindset Interested? Please call Taylor Butterfield on (phone number removed)

Nurse Unit Manager - Days When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Position :Unit Manager (RGN, RMN, RNLD) - DAYS Care home :Adswood Lodge Location :Stockport, SK3 8HZ Contract type :Full time, 42 hours per week Rate :£24.20 per hour This is an exciting opportunity to use your nursing leadership skills to make a real difference every day. Join us as our new Unit Manager at Adswood Lodgecare home in Stockport. Adswood Lodge is a specialist care service for adults living with complex and high acuity needs. In this role, youll work at a senior level, under the leadership of the Clinical Nurse Manager, to manage a team of nursing and care colleagues, drive quality and maintain high standards of care on your unit. As a Registered Nurse with us, youll be empowered to really make a difference. Our high staffing levels give you the time to provide truly person-centred nursing care, with a supportive team around you. And our excellent training and career development pathways support you to be the best Nurse you can be. About Exemplar Health Care Adswood Lodge is part of Exemplar Health Care, a leading provider of nursing care for adults living with complex and high acuity needs. We support adults living with complex mental health needs and neuro disabilities including Huntington's disease and Parkinson's disease. As well as stable and secure employment opportunities, we offer great benefits and perks, and plenty of opportunities to learn, develop and progress. About the role As a Unit Manager with Exemplar Health Care,youll be at the forefront of clinical care delivery for the people living on your designated unit. No two days will ever be the same, but your day-to-day responsibilities will include: leading your units care and nursing teams to ensure we meet the medical, physical and emotional needs of the people we support providing strong leadership to maintain and continuously develop high standards of care and drive continuous improvement overseeing and managing all your units clinical elements and risks ensuring care plans and risk assessments are completed and reviewed in a timely manner and reflect care interventions appropriately acting as the Named Nurse for residents allocated to you, with responsibility for the oversight, review and update of their care profiles supervision and management of your units ordering, handling,storage, administration, recordinganddisposal ofmedication. About you Above all, youre someone who identifies with our values of fun, integrity, responsiveness, success and teamwork. Youll be a natural role model with the ability to manage your units team of Registered Nurses, Nurse Associates and Health Care Assistants. Youll also have: a thorough understanding of best practice in nursing care an excellent range of clinical and communication skills that youre able to demonstrate an enthusiastic approach to encouraging and motivating people the ability to work confidently on your own initiative a good standard of digital skills . To apply for this role, you must have a first-level nursing registration with a valid Nursing and Midwifery Council (NMC) PIN. As this is a management role, you should also have post-registration and management or supervisory experience and/or training or qualifications. This is a great opportunity for a Registered Nurse who wants to progress into management. What we offer We offer great rewards and perks including: excellent supervision, peer support, learning opportunities and career prospects retail and lifestyle reward discounts free DBS check electric car salary sacrifice scheme paid NMC membership paid access to the RCNi Learning platform 24/7 counselling and support Blue Light Card eligibility. How to apply Sound good? Wed love to hear from you. Click the button to APPLY NOW. TPBN1_UKTJ

Warehouse Operative Location: Tameside Hours: 08:00-17:00 Salary: £12.71 About the Role We are seeking a reliable and detail‑focused Warehouse Operative to join our busy and fast‑paced warehouse team. You will support all warehouse departments with a variety of operational and administrative tasks, including producing worksheets, booking shipments, and maintaining accurate stock records. The ideal candidate will be organised, proactive, and confident using Excel and other Microsoft Office applications. Key Responsibilities Print worksheets, picking notes and confirm batch selections using SAP. Print and correctly apply labels to outgoing packages. Gather and analyse data from software and worksheets to identify opportunities for improvement and process efficiency. Prepare carrier documentation for UK and international shipments (including TNT). Complete agreed customer administration tasks, including shipping documentation. Use Microsoft Office to produce graphs, tables and performance data for warehouse teams. Book packaging materials in and out of SAP. Provide administrative support to the warehouse and Health & Safety teams, including copying, scanning and maintaining filing systems. Maintain good housekeeping standards and follow 5S principles (Sort, Set, Shine, Standardise, Sustain). Load goods and packages onto delivery vehicles. Maintain accurate stock records to ensure items can be easily located. Support daily warehouse operations across processing, picking and packing (training provided). Identify opportunities for improved ways of working and contribute ideas to enhance processes and procedures. Work consistently to high health and safety standards and follow all warehouse procedures. Carry out additional warehouse duties as required. Qualifications & Requirements Basic literacy and numeracy skills essential for data entry and inventory control. Familiarity with inventory tracking systems. Previous warehouse experience is desirable. Essential Skills Able to meet the physical demands of the role. Comfortable working in a fast‑paced, target‑driven environment. Flexible and adaptable approach to work. Strong communication and listening skills. Excellent organisational skills and high attention to detail. Able to work well both independently and as part of a team. Proactive and able to use initiative. Good oral and written communication skills. Desirable Skills Experience in a chemical warehouse environment. Manual handling training or experience. Experience operating forklifts or pallet trucks. Knowledge of chemical handling, hazard identification, accurate measurement and labelling. Personal Attributes Able to manage and prioritise multiple tasks with competing deadlines. Committed to producing high‑quality work. Results‑driven, with the ability to meet or exceed targets. Positive, respectful and enthusiastic attitude. If you are interested, please apply with your CV

Your new company A leading manufacturer is seeking a skilled and driven Manufacturing Engineer to join its high-performance production team. This is a rare opportunity to contribute to cutting-edge military technology in a role that blends hands-on engineering with strategic process development. You'll be responsible for optimising manufacturing processes, driving continuous improvement, and supporting the introduction of new products into production. Working closely with design, quality, and operations teams, you'll play a key role in ensuring that complex assemblies meet rigorous standards for performance and reliability. Your new role Develop and implement manufacturing processes for precision-engineered components Support NPI (New Product Introduction) and prototype builds Conduct root cause analysis and implement corrective actions Collaborate with cross-functional teams to improve productivity and reduce waste Ensure compliance with defence and quality standards (ISO, AS9100, etc.) Use CAD and simulation tools to validate manufacturing feasibility What you'll need to succeed Degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent) Proven experience in a high-spec manufacturing environment (defence, aerospace, automotive) Strong understanding of lean manufacturing and Six Sigma principles Proficiency in CAD software and ERP systems Excellent problem-solving and communication skills Eligibility for UK Security Clearance What you'll get in return Competitive salary with annual performance bonus Flexible working options and early Friday finish Private healthcare and enhanced pension Career development in a globally recognised defence organisation Access to cutting-edge technologies and high-impact projects What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Finance Manager (Part-Time- 22.5 hours per week) – £25,062.60 pa (FTE £41,771) - Salford – Hybrid Our client is a dedicated charity based in Salford and are looking to expand their finance team by recruiting to the new post of Finance Manager. The postholder will lead the finance function, ensuring that robust financial systems, processes and controls are in place to safeguard the organisation and enable informed decision-making. They will provide high-quality financial insight, maintain the integrity of financial information, and oversee the delivery of accurate and compliant financial operations—including payroll, management reporting and audit preparation. The Role : Produce accurate and timely quarterly management accounts, including all supporting schedules and reconciliations. Support the annual budgeting process, including entering budgets into the finance system and updating records as programmes evolve. Monitor organisational and project budgets throughout the year, highlighting risks, variances and opportunities for improvement. Prepare costings for funding bids, tenders and proposals to ensure full cost recovery and sustainable delivery. Ensure strong internal financial controls are operating effectively across all finance processes. Oversee the full monthly payroll cycle Manage the end-to-end monthly invoicing process, maintaining all payment schedules and supporting robust income tracking. Prepare supporting documentation, reconciliations and adjustment schedules for the annual statutory audit. Produce draft year-end financial statements for review by the Director of Finance & Resources. Line manage a Finance Officer The role is offered on a part-time basis (22.5hours per week) and days and hours can be flexible but must include a full day on a Monday. Benefits : 28 days’ holiday - rising to 30 days (after five years), plus Bank Holidays (pro rata for part-time) Enhanced company sick and maternity pay, subject to terms and conditions of service Pension scheme - with 7% employer contribution (and 1% mandatory employee contribution) Cycle to Work scheme Membership of the Hospital Saturday Fund via an employer subsidised scheme (optional and non-contractual) RHS family membership (optional and non-contractual) Development opportunities

We have an opportunity for an Import Merchandiser to join our team in Salford on a 1 year Fixed term basis. Reporting to the Head of Operations, the merchandiser will liase with offshore suppliers, factories and customers to manage the critical path ensuring all products meet the delivery dates while maintaining the quality and safety standards required. Responsibilities Manage Customer and Licensor approvals to meet critical path. Check lab dips/strike offs and bulk fabric submissions and manage customer approval Raise orders on the internal system and notify country offices / factories as required. Input data into the internal Order Management system to provide up to date and accurate information for the production and warehousing teams to work from Complete customer packaging requirements and order photographic samples with factories Liaise with the Licensing coordinator regarding the development and approval of licensor packaging. Ensure all paperwork is kept up to date and ensure customer contracts match our PO/SO Arrange and lead customer pre-production meetings Be responsible (along with Technical team) for Gold Seal checking procedure and authorizing shipment of goods Co-ordinate the checking and approval of invoices and packing lists and giving the authorization to accounts for payment. Work alongside the warehouse team to ensure on time delivery of goods to the customer. Meetings with the customer as per agreement with the Account Manager. Identify opportunities for improving the method of operation in your area of responsibility. Any other duties deemed necessary by management. Observe all Company Rules, Standard Operating Procedures and Company Policies particularly in relation to Health and Safety, Harassment, Disciplinary and ICT Security. Maximize efficiency by supporting Cooneen Lean continuous improvement activities This is not an exhaustive list of all responsibilities. The successful job holder will be expected to perform varying tasks as required by their line manager & the overall objectives of the organisation. Reward At the Cooneen Group, we focus on the wellbeing of our employees. In addition to a competitive rate of pay and work within a modern and comfortable environment, you’ll receive a generous 35 days annual leave private healthcare cash plan for you and your dependents, and lunchtime finish on Fridays. Facilities at our include a staff kitchen, where complimentary fresh fruit ?tea, coffee and filtered water are provided each day. Other benefits include employee assistance program, Royal London pension, paid refer a friend scheme, and employee social club. Requirements Essential Previous Import Merchandising experience. Proficiency in a range of software, including MS Office Suite. Ability to see a full colour range (required for checking lab dips) Desirable Degree or equivalent in Industry related field. Working with licensors, or character wear Previous experience of working within the fashion or textiles industry, ideally in childrenswear. Clean current driving license (for attending customer visits) About The Cooneen Group Cooneen Group is one of the largest and most diversified garment manufacturers in Europe. We are a successful, stable group of companies operating in a range of clothing markets globally. Our group is comprised of over 250 employees employed across four individual companies bringing innovative design, excellent customer service, and strong, stable supply chains in order to meet and exceed customers expectations. Each business unit focuses on delivering outstanding garment solutions for clients with very specific garment requirements. Cooneen has been designing, manufacturing, and supplying licensed garments to some of the largest retailers in the UK for over 50 years, which continues from our Manchester design studio and sales office today. The Cooneen Group is an Equal Opportunities Employer We reserve the right to enhance criteria on shortlisting

Multi Skilled Engineer Middleton, Manchester £53,622 total package (includes 30% shift allowance) Continental Shift Pattern: 2 days (7am to 7pm), 2 nights (7pm to 7am), 4 days off 42 hours per week The Company We are recruiting for a Multi Skilled Engineer to join a well-established FMCG manufacturing business based in Middleton. This is a large, fast-paced production site with a strong engineering culture, modern equipment, and a clear focus on continuous improvement. The Role Reporting to the Engineering Section Manager, you will be part of a multi-skilled engineering team providing both reactive and planned maintenance across a high-volume production environment. This is a hands-on role where you will be responsible for keeping production running efficiently, minimising downtime, and supporting ongoing improvement projects across site. We are looking to recruit two engineers, one electrically biased and one mechanically biased. Key Responsibilities Carry out reactive maintenance and fault finding to minimise downtime and production losses Complete planned preventative maintenance (PPM) activities to a high standard Work with permit to work systems, isolations and risk assessments Support continuous improvement and lean maintenance initiatives Accurately record work using CMMS systems, including parts and follow-up actions Work closely with production, quality and H&S teams to ensure minimal disruption Assist with installation, commissioning and improvement of new equipment Support training and development of other engineers where required Maintain high standards of health and safety at all times About You Time served apprenticeship or Level 3 qualification in Electrical or Mechanical Engineering Experience working as a Multi Skilled Engineer within a manufacturing environment Strong fault finding skills, either electrical or mechanical bias Experience working on high-speed or automated production machinery Ability to read and interpret electrical and mechanical drawings Knowledge of pneumatic, hydraulic and control systems Proactive, team-oriented approach with strong problem-solving ability Comfortable working in a fast-paced, high-pressure environment What’s On Offer £53,622 total earnings (including shift allowance) 24 days holiday plus bank holidays Additional holiday for long service Option to earn 3 extra “Thank You Days” per year Pension scheme (salary sacrifice) Private medical cover 3x life assurance Overtime available Stable, well-established business with strong engineering investment Why Join This is a great opportunity to join a business where engineering plays a critical role in site performance. You will be part of a well-structured team, working on modern equipment within a fast-paced FMCG environment, with genuine opportunities to contribute to continuous improvement and site performance. Keywords Multi Skilled Engineer, Maintenance Engineer, Electrical Engineer, Mechanical Engineer, Shift Engineer, FMCG Engineer, Manufacturing Engineer, Production Engineer Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering and Manufacturing, Food and Drinks, Pharmaceutical, Supply Chain and Procurement, and Professional Services. View our latest jobs on our website and follow us on LinkedIn. INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Join HellermannTyton as our Production and Materials Planner! Location: Manchester, M22 4TY Job Type: Full Time, Permanent Salary: Competitive Working Hours: Mon–Thu: 08:30–17:00, Fri: 08:30–15:30 About Us: At HellermannTyton, we’re more than just a leading manufacturer - we’re a trusted global partner in cable management, data connectivity, and network infrastructure solutions. Since 1935, our mission has been to provide innovative solutions for all cable management needs – with customer satisfaction as our priority. Our portfolio includes more than 75,000 items, and we operate 15 world-class manufacturing facilities in 38 countries, employing over 6,000 people. You will be joining a business with ambitious growth plans, currently undergoing a period of change to enhance our performance and seize every opportunity for greater success. We strive to be elite and are looking for individuals who share this vision. HellermannTyton is owned by APTIV and operates as a standalone business unit within the APTIV Group. Production and Materials Planner - The Role: The Production & Materials Planner plays a critical role in stabilising factory performance by ensuring accurate short‑term planning, material availability, and clear communication across Production, Customer Service, and Purchasing. You will manage the daily planning rhythms, run key system processes, align cross‑functional stakeholders, and ensure that works orders, material flows, and priority lists are accurate and up to date. This role provides operational insight, supports decision‑making, and underpins the smooth running of our manufacturing operation. As a Production & Materials Planner, you will be at the heart of factory performance, helping us build a stable, efficient, and predictable planning environment. You will work with great people, great products, and great ambition—and every day you will see the impact of your work on service levels, customer satisfaction, and operational success. Production and Materials Planner - Key Responsibilities: • Validate and manage short-term production plans, including releasing work orders and updating planning systems, • Produce and communicate daily production priorities, highlighting risks, changes, and key focus areas, • Respond to operational changes (e.g. downtime, urgent demand, quality issues) and escalate where needed, • Manage materials ordering and supplier deliveries, ensuring stock availability and resolving any issues, • Collaborate with Production, Customer Service, and stakeholders to maintain clear communication and alignment, • Support planning processes, maintain accurate data, and contribute to continuous improvement initiatives Production and Materials Planner - You: • Experience in a manufacturing supply chain role (planning, scheduling, purchasing, customer service), • Confident using ERP/MRP systems and Excel, • Strong organisation, attention to detail, and ability to manage multiple priorities, • Clear communicator with a proactive, positive approach, • Enjoys working in a fast‑paced environment and partnering cross‑functionally Benefits: • Enhanced annual leave, • Enhanced family-friendly leave policies, • An enhanced sick pay scheme, • Comprehensive mental health and wellbeing support, including access to counselling, an employee assistance programme, mortgage brokering services, and additional resources for you and your family, • Free on-site car parking, • Subsidised canteen facilities at our larger locations We operate a strict Preferred Supplier List for recruitment agencies and are not currently seeking additional partners. Any CVs submitted speculatively by agencies outside of our PSL will be treated as a gift, and no fees will be payable. To submit your CV for this Production and Materials Planner opportunity click ‘Apply’ now

QA/ Validation Supervisor, Pharmaceutical Location: Greater Manchester (ONSITE ROLE) Salary: c£45,000 Hours: 37.5 hours per week (days) Additional: Company bonus (discretionary), company pension, ongoing professional development opportunities in a company that is growing. Russell Taylor is working with a well-established organisation operating within the pharmaceutical and life sciences sector, currently seeking a QA Supervisor to join their growing quality function. This is a newly created role offering the opportunity to lead a small team while remaining hands-on in quality systems and validation activities. The Role Reporting into the Head of Quality, you will be responsible for the day-to-day activities of the QA team, ensuring compliance with regulatory standards and the effective operation of the Quality Management System (QMS). This is a balanced position combining team leadership with technical QA and validation responsibilities including report writing and oversight of equipment and process validation activities. Lead, coach, and develop a team of QA professionals (team size approx. 7) • Ensure the QMS remains compliant, inspection-ready, and aligned with regulatory requirements • Oversee completion and quality of QA documentation including deviations, CAPAs, change controls, and reports • Support and participate in internal and external audits (regulatory, customer, supplier) • Drive continuous improvement initiatives across quality processes • Manage team performance, training, holiday planning, and absence monitoring • Act as a key point of contact for quality-related matters across the business • Contribute to validation activities (IQ/OQ/PQ) for equipment and processes • Ensure timely delivery of KPIs and departmental objectives The Person Proven experience within a GMP-regulated environment in a similar QA/ Validation role • Experience in equipment validations (writing reports), the ideal applicant will have process validation experience too • Previous line management or supervisory experience is essential • Strong working knowledge of Quality Management Systems (QMS) • Experience with internal audits is required; external audit exposure is advantageous • Ability to contribute to validation and technical documentation • Strong communication, organisation, and decision-making skills • High attention to detail with a proactive and resilient approach Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us

Building Services Officer Facilities Management | Permanent Role Are you an experienced Mechanical, Electrical, Plumbing, or Building Services Engineer looking for a role where no two days are the same? Do you enjoy solving problems, working hands-on, and making a real impact on operational environments? If so, this could be the perfect opportunity for you. The Opportunity Join a fast-paced Facilities Management team supporting a leading rail client, at the heart of a diverse and evolving estate. This is a role where variety is guaranteed and your expertise will directly influence the performance, safety, and longevity of key assets. From supporting major refurbishment programmes and new developments to maintaining critical operational facilities, you'll play an integral part in delivering high-quality environments that are safe, modern, and fit for purpose. You'll contribute to everything from lifecycle replacement projects to day-to-day maintenance, ensuring facilities continue to operate efficiently and effectively. Your Role This is a dynamic, hands-on position combining planned maintenance with reactive problem-solving. A typical day could include: Coordinating and reviewing planned preventative maintenance (PPM) activities Managing contractors and ensuring high standards of delivery and compliance Diagnosing and resolving mechanical and electrical faults Responding to urgent issues, incidents, or safety concerns Supporting refurbishment and improvement projects across the estate Attending site meetings and collaborating with internal and external stakeholders Monitoring asset performance and contributing to lifecycle planning You'll be at the centre of operational delivery, helping to ensure facilities remain safe, compliant, and fully functional. About the Team You'll be part of a collaborative and forward-thinking Facilities Management function delivering services for a major rail organisation, responsible for maintaining and improving a wide-ranging property portfolio. The team delivers everything from reactive maintenance to large-scale refurbishment and new-build projects, offering excellent variety and professional development opportunities. What You'll Bring We're looking for someone who combines strong technical knowledge with a proactive, solutions-focused mindset. You'll ideally have: Practical, hands-on experience in Facilities Management or building services Strong knowledge of mechanical, electrical, and plumbing (MEP) systems Experience supervising or managing contractors Ability to diagnose and resolve complex technical issues Familiarity with CAFM/EAM systems, compliance processes, and maintenance planning Good working knowledge of Microsoft Office 365 (Excel essential) HNC/HND (or equivalent) in a relevant discipline (or equivalent experience) Apprenticeship or vocational training (highly valued) Experience with AutoCAD and membership of a professional body would be advantageous but not essential. Just as important is your approach-you'll be calm under pressure, adaptable when priorities shift, and confident working collaboratively to solve problems. Even if you don't meet every requirement, we encourage you to apply if you bring the right attitude and transferable skills. Why Join? Competitive salary of £43,210 - £47,947 per annum (depending on experience) 28 days annual leave plus bank holidays, increasing with service, with option to buy more Generous pension scheme with life assurance Flexible and hybrid working options to support work-life balance Strong focus on professional development and career progression Enhanced family-friendly policies and wellbeing support A varied and rewarding role where your skills make a tangible difference every day If you enjoy variety, thrive on problem-solving, and want your technical expertise to be truly valued, this is an excellent opportunity to take the next step in your Facilities Management career. TPBN1_UKTJ

Principal Structural Engineer Location: Manchester (Hybrid working, 3 to 4 days a week onsite) Contract: 12 month contract Rate: £400 to £490 per day (outside IR35) We are currently recruiting for a Principal Structural Engineer to join a growing engineering consultancy delivering major infrastructure projects across the rail and water sectors. This is an excellent opportunity to work on technically challenging projects while leading structural design delivery within an experienced multidisciplinary team. The Role As a Principal Structural Engineer, you will be responsible for providing technical leadership and ensuring high-quality structural design delivery across a range of infrastructure projects. You will work closely with clients, project teams, and junior engineers to develop safe, efficient, and compliant structural solutions. Key responsibilities include: Ensuring the design team produces deliverables that meet safety and quality requirements Approving design deliverables, design risk assessments, reports, and specifications Identifying efficient structural design solutions from project scopes and site visits Leading and developing engineers, CAD technicians, and graduates Estimating engineering hours for design work packages Acting as Responsible Engineer / CRE on selected projects Supporting continuous improvement of engineering standards and best practices Typical Projects Projects are delivered across the UK rail and water sectors, including: Bridge repair and strengthening designs New-build service reservoirs Foundations for overhead line equipment (OLE) Retaining wall designs for sewage treatment works upgrades Initial Project Design of reinforced concrete detention tanks used to store sewage during storm conditions. These structures typically include: Reinforced concrete shafts Diameters exceeding 10 metres Depths of 15-20 metres Required Experience Minimum 10 years' structural design experience at Senior or Principal level Strong experience in regulated infrastructure sectors, such as: Rail Water Oil & Gas Nuclear Highways Bridges Chartered Engineer (CEng) status Degree or HND in Civil/Structural Engineering Strong understanding of engineering drawing practices Awareness of construction methods and materials Full UK driving licence and access to a vehicle Key Skills Strong technical structural engineering knowledge Excellent communication and stakeholder engagement Ability to lead and mentor engineers Strong problem-solving and analytical skills Results-focused with strong attention to design quality and compliance If you are interested in discussing this opportunity further, please apply or get in touch to arrange a confidential conversation

Supported Living Manager. Learning Disabilities. Autism. Mental Health. Complex Care. Thameside. Greater Manchester. My client is a quality-focused supported living organisation looking for an experienced manager from a complex care background (LD, MH, autism support etc) to provide interim management support in the Thameside area - Stockport, Hyde etc. There are several different services in the area, all of a high quallity and providing support to adults with complex care needs including learning disabilities, autism, mental health and physical disabilities. You will be experienced, and able to hit the ground running. As someone passionate about making a difference and ensuring care is first-rate and person centred, you will be happy to work with the regional manager and senior team to provide inspirational leadership, identify areas for improvement and ensure that the services are operating effectively and with excellent standards of care. Initially offered on a 3 month contract, with an immediate start available

Senior Cloud / Platform Engineering role Senior Cloud Engineer - Hybrid (Manchester) - Government Project Salary: £70,000 - £73,000 + Benefits + Unlimited Training Budget Active SC Clearance is required for this role. Senior Cloud Engineer - Hybrid (Manchester) - Government Project Salary: £70,000 - £73,000 + Benefits + Unlimited Training Budget Active SC Clearance is required for this role. Are you an experienced Cloud Engineer ready to step into a senior role where you can lead, influence, and deliver at scale? We're looking for a Senior Cloud Engineer to play a key role in delivering secure, high-performing cloud platforms for a major UK government programme based in Manchester. This hybrid role offers the flexibility of working across home, office, and client environments, while remaining closely connected to impactful project delivery. The Opportunity As a Senior Cloud Engineer, you'll be a core member of a high-performing Cloud Pod-guiding technical delivery while mentoring others and shaping best practices. You'll balance hands-on engineering with leadership responsibilities, helping to design and evolve modern cloud platforms that underpin critical public services. This is an opportunity to influence architecture, drive innovation, and contribute to the continuous improvement of both platforms and people. What You'll Be Doing Leading the design, build, and optimisation of scalable cloud platforms using a code-first approach Driving best practices across Infrastructure as Code, automation, and platform standardisation Acting as a technical mentor within your pod, supporting and upskilling engineers Collaborating across teams to deliver secure, resilient, and high-quality cloud solutions Championing Agile delivery, contributing to sprint planning and technical direction Enhancing CI/CD pipelines and DevOps practices to improve efficiency and reliability Contributing to engineering strategy, reusable assets, and internal standardsWhat We're Looking For Proven experience in a Senior Cloud / Platform Engineering role Strong expertise in AWS and/or Azure environments Advanced experience with Infrastructure as Code (Terraform preferred) Solid experience with Git-based version control (e.g. GitHub) Strong knowledge of CI/CD pipelines, automation, and DevOps principles Experience with Kubernetes, Ansible, and container-based architectures Strong foundation in infrastructure, networking, and security principles Experience working in Agile teams, with the ability to lead and influenceWhat's in It for You £70,000 - £73,000 base salary + comprehensive benefits Unlimited training budget for certifications and external learning Clear pathway into leadership and architecture roles Private healthcare and wellbeing support Flexible, hybrid working environment Opportunity to work on high-impact, secure government programmes Why Join? You'll be part of a collaborative, engineering-led culture where your expertise is valued and your ideas shape real outcomes. This is your opportunity to lead from the front, work on meaningful projects, and accelerate your career in a supportive, high-performing environment. If you're ready to take the next step into a senior role and make a real impact, we'd love to hear from you

Senior Data Engineer * Hybrid-working (Manchester + Home-based) * c£60,000 to £75,000 per year (DOE) * Plus an excellent company benefits package (including Private Healthcare, Bonuses, Professional Accreditations and Subscriptions, 25 days Annual Leave + Bank Holidays, etc.) The Opportunity: We are supporting a leading IT Consultancy operating at the forefront of digital services and transformation across the UK public sector are seeking an experienced Senior Data Engineer to play a key role in designing and delivering modern, scalable data platforms that support critical national services. Working within collaborative, multi-disciplinary teams, you will take ownership of end-to-end data engineering delivery across greenfield and transformation initiatives. You will influence technical direction, guide engineering best practice, and support the development of high-quality, robust data services that operate at enterprise scale. You will be consulting across modern cloud ecosystems and data technologies, with opportunities to deepen expertise in Python, SQL, cloud-native data tooling, orchestration platforms and streaming technologies across AWS, Azure and GCP. Skills and Experience: * Proven experience delivering production-grade data engineering solutions within complex environments * Strong Python skills for building, testing and operating scalable data pipelines * Experience working with at least one major cloud platform (AWS, Azure or GCP) * Strong SQL expertise and experience working with relational databases such as PostgreSQL or Microsoft SQL Server * Experience working with NoSQL technologies such as DynamoDB, MongoDB or similar * Hands‑on Kafka (or equivalent streaming) and workflow orchestration (Airflow) experience * Strong understanding of data architecture patterns including data lakes, warehouses and event-driven architectures * Experience of consulting across Agile delivery environments, implementing data quality, validation and monitoring frameworks Role and Responsibilities: * Lead the design, build and delivery of data platforms and services across the full engineering lifecycle * Own technical delivery of data pipelines, models and platform components, ensuring solutions are robust, scalable and maintainable * Design, develop and deploy ETL/ELT pipelines to ingest, transform and optimise large-scale datasets * Build and operate event‑driven architectures (Kafka) and orchestrate workflows (Airflow) * Apply strong data architecture principles across data lakes, warehouses and event-driven solutions * Develop and maintain streaming pipelines using technologies such as Kafka * Implement monitoring and observability solutions using tooling such as Prometheus and Grafana * Ensure data quality, validation and governance processes are built into engineering workflows * Act as a trusted technical advisor to clients and stakeholders (client-facing), translating business requirements into robust engineering solutions * Support delivery planning activities, including estimation, risk identification and dependency management * Mentor and support other engineers, contributing to a culture of continuous improvement and engineering excellence Applications: Please contact Edward Laing here at ISR to learn more about our client and how they are leading the way in developing the next generation of technical solutions through innovation and transformational technology?

Manufacturing Fabrication Supervisor An exciting opportunity has arisen for a Manufacturing Fabrication Supervisor with a leading company in the engineering sector. This company is renowned for its commitment to quality and innovation, providing advanced manufacturing solutions. Key Responsibilities: • Lead and supervise the manufacturing operations team to ensure safe and efficient delivery of finished products at the correct quality and cost. - Champion continuous improvement initiatives across all areas of responsibility. - Ensure compliance with Health, Environmental, and Safety policies while leading Safety, Health, and Environmental (SHE) activities. - Manage resources effectively to meet business targets and redirect resources as necessary. - Oversee team welfare and absence management in accordance with company procedures. - Drive team competence and arrange on-the-job training to enhance skills and flexibility. - Prepare and present daily reports on primary business measures. - Maintain adherence to the company's Quality Management Systems and Manufacturing Procedures. - Conduct daily audits of the workplace environment to ensure standards are met. Qualifications: • Proven experience in a similar supervisory role within an Fabrication environment. - Familiarity with manufacturing schedules and recovery plans is essential. - Proficient in SAP and Microsoft Office, with a solid understanding of Material Requirements Planning (MRP). - Experience in resource planning, project reporting, and factory maintenance is desirable. - A degree or HND in Manufacturing or an Engineering Discipline is advantageous. - IOSH/NEBOSH certification would be beneficial. Benefits and Perks: • Competitive salary of £50,000 to £55,000 - Attractive pension scheme with a 4% employee contribution and 7% employer contribution. - Half-day Fridays to promote work-life balance. - Life assurance and company sick pay schemes that increase with service. - Employee Assistance Programme and wellbeing initiatives, including free fruit on Tuesdays. - Cycle to work scheme and free on-site car parking with electric vehicle charging points. This is a fantastic opportunity for an ambitious individual looking to further their career, please apply now

Join an Award-Winning Team Making a Genuine Difference As an Internal Auditor, you will carry out detailed financial audits across a wide range of social care settings, including residential care, supported living, and extra care services. This is a hands-on, varied role that involves significant national travel and provides the opportunity to directly observe and influence financial practices in frontline services, both safeguarding and empowering the people who we support. Working largely independently during service visits, you will review financial records, assess financial controls, identify areas of concern or risk, and support services to improve their governance and compliance. You will act as a trusted advisor to managers and frontline staff, offering guidance, problem-solving support, and training where required. Your work will help ensure that individuals receiving financial support, each with different levels of capacity, experience safe, empowering, and well-managed financial care. Key Responsibilities Conduct planned and unplanned financial audits nationwide, typically completing three audits per week (including occasional overnight stays). Produce clear, detailed audit reports outlining findings, risks, and required improvements. Identify financial irregularities, risks, or non-compliance and recommend corrective actions. Escalate potential fraud or financial mismanagement in line with organisational procedures. Support investigations into financial concerns or discrepancies. Provide practical advice, coaching, and on-site problem-solving support to service teams. Deliver training to staff on financial responsibilities, procedures, and best practice. Analyse patterns and trends to contribute to wider policy, system, and training improvements. Represent the Internal Audit function in meetings and share key insights. Assist with financial incident management processes. Work proactively, managing your own schedule while providing regular updates to your line manager. Adhere to Creative Support's values, policies, confidentiality standards, and Equal Opportunities Policy. About You We are looking for someone who is: Highly organised, proactive, and confident working independently Able to travel regularly across the country, including overnight stays. Skilled at analysing financial information with strong attention to detail An excellent communicator who can build rapport and offer supportive guidance Committed to safeguarding, fairness, and high-quality practice Motivated by making a positive difference to both staff and the people we support Enthusiastic to contribute to our collaborative and consultative team culture, where we strive for continuous improvement by harnessing individual's strengths and interests. Experience in auditing, financial governance, or social care is advantageous, but we welcome applicants from a range of professional backgrounds who can demonstrate the right skills and values. Vacancy Reference Number: 88288 Benefits of working with Creative Support include a probationary bonus, pension contributions, 28 days Annual Leave and company paid enhanced DBS. We are a passionate, inclusive, and anti-racist organization - Stonewall Diversity Champion, Disability Confident Employer who have recently received Investors in People Gold awarded. Applications are reviewed as they are received, we do not provide feedback for unsuccessful applications. We can only accept applications from candidates who are located in and eligible to work within the UK - This post will not be open to Sponsorship under the UKVI scheme, and we are unable to accept applicants with Skilled Worker Visas . TPBN1_UKTJ